Sophie Meynieux [Wed, 14 Aug 2013 13:51:10 +0000 (15:51 +0200)]
Bug 10727: Replace carriage return with <br /> when printing hold notices
This patch replaces carriage return with <br /> in the content of
hold notices for printing. This is necessary to convert html file
into well formatted pdf file.
Test plan :
- check in an item reserved by a borrower
that has not activated email notification
- verify in message_queue table that you've got a
new HOLD_PRINT notice with status 'pending'
- run gather_print_notices.pl <directory>
Without the patch, the script generates a html file without <br /> tags.
If you run printoverdues.sh <directory>, the text in the resulting PDF
file is all on one line
With the patch, the script generates a html file with <br/> tags and
the PDF file created by printoverdues.sh is well formatted.
Robin Sheat [Thu, 11 Jul 2013 11:58:34 +0000 (23:58 +1200)]
Bug 10574 - mute the "upgrading from 3.2" message
New installs get the message about running a script if upgrading from
3.2. They shouldn't. This silences this message in all cases except when
you actually are upgrading from 3.2.
Test plan:
There are three scenarios to test:
1) A fresh install should not cause the prompt.
2) An upgrade with or without the debconf entry set should not cause the
prompt.
3) An upgrade from a 3.2 release to this should cause the prompt.
To remove the debconf entry that says the prompt has been seen:
This should be run before every test to make debconf forget that it's
shown the prompt. To get its current state:
sudo debconf-show koha-common
To test against the 3.2 version, an empty package that claims to be Koha
3.2.2 is attached to the bug.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 598a830af0f97aef39bae36265c06a6f8ed73f10) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit f6d1d5cd6c4f93f6c592170f59241268dfff79cb)
David Cook [Wed, 21 Aug 2013 02:12:36 +0000 (12:12 +1000)]
Bug 9603 - Fix layout of Patron Card Creator Layout screen for display in IE
Currently, the layout for the Edit/Add Layout screen of the Patron
Card Creator is in complete disarray, when viewed in Internet Explorer
(of any version).
The nav bar is pushed to the bottom of the page, every fieldset is
empty (as their contents have been pushed out into different parts
of the page), and the checkboxes don't work.
The cause appears to be some extraneous mark-up (a few extra fieldset
and li elements)and some missing mark-up (ol elements to wrap the list
elements, especially when nesting lists within each other and within
div elements).
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I didn't test this in IE, but changes are fixing general
problems with HTML validity.
Checking the page with the W3C validator:
Before: 27 Errors, 7 warning(s)
After: 6 Errors, 7 warning(s)
All tests and QA script pass, page looks alright.
Would be nice to see the remaining problems fixed in
a follow-up.
Bug 10588: improve selection of default branch for OPAC popular items pag
In OPAC most popular items page:
With user is logged-in his branch should be selected by default.
When a branch is manually selected and form is submitted, this branch
should be selected in results page.
When looking at HTML, you see that all options are selected in combobox.
This patch corrects by using the hidden input 'do_it' to distinguish
form display and no branch filter selected.
Test plan :
- Make sure there are issues on records created in the past 3 month
- Go to OPAC not logged-in
- Click on "Most popular"
=> You get to page with results, "All libraries" is selected
- Select a branch and submit
=> You get to page with results, the branch is selected [testing opac-topissues.inc from]
- Select a branch and perform a search that does not have results (for example an item type never issued)
=> You get to page without results, the branch is selected [testing opac-topissues.tt form]
- Log-in with a user
- Click on "Most popular"
=> You get to page with results, user's branch is selected
- Select "All libraries" and submit
=> You get to page with results, "All libraries" is selected [testing opac-topissues.inc from]
- Select "All libraries" and perform a search that does not have results (for example an item type never issued)
=> You get to page without results, "All libraries" is selected [testing opac-topissues.tt form]
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely and passes all tests.
Jonathan Druart [Tue, 27 Aug 2013 10:04:14 +0000 (12:04 +0200)]
Bug 10786: fix Javascript error on the parcel page
The include of the yui json file generates a js error: YAHOO is not
defined.
This file seems not to be in use (patches for bug 8382 remove the use).
To test:
- go on acqui/parcel.pl?invoiceid=XXX
- verify the error occurs (with firebug)
- apply this patch
- refresh the page
- verify this error does not appear anymore
- Verify there is no regression on this page
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch fixes the javascript error pointed out by Firebug.
Jonathan Druart [Thu, 27 Jun 2013 13:33:46 +0000 (15:33 +0200)]
Bug 5904: make patron search autocompletion respect IndependentBranches
Test plan:
- Add a staff user foo in a library A
- Add a staff user bar in a library B
- log in as foo and try to search 'bar'
- Switch on (Prevent) the syspref IndependentBranches
- the search returns no result
- log in as a superlibrarian
- Check that you are allowed to search all patrons.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Galen Charlton [Wed, 28 Aug 2013 16:27:43 +0000 (16:27 +0000)]
Bug 7143: history.txt and about page updates
- two new developers
- releases
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reads all ok.
Magnus Enger [Tue, 6 Aug 2013 14:00:01 +0000 (16:00 +0200)]
Bug 10690 - Warn about trailing slashes in description of OPACBaseURL and staffClientBaseURL
The descriptions for OPACBaseURL and staffClientBaseURL are not explicit
about including a trailing slash or not. This patch makes it explicit
that the trailing slash should *not* be included.
To test:
- Apply the patch
- Search for "baseurl" in the system preferences
- Check that the description of both sysprefs includes a warning about
not including a trailing slash.
- Sign off
If you want to check that the trailing slash is in fact superfluous you
can do something like 'grep -r "BaseURL" *' and check that these
sysprefs are usually concatenated with some string that starts with a
slash.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes to the description appear correctly on both system
preferences.
Owen Leonard [Fri, 9 Aug 2013 15:41:41 +0000 (11:41 -0400)]
Bug 10587: fix HTML errors on authority detail page in OPAC
A validator check of the OPAC's authority detail returns a few minor
errors. This patch corrects the errors.
To test, apply the patch and run an OPAC authority detail page through
an HTML validator. There should be no errors which are specific to the
authorities detail template (as opposed to header and footer includes).
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Also checked using the W3C validator and testing the
authority detail page in the OPAC is still correctly
displayed.
Magnus Enger [Tue, 30 Jul 2013 13:32:31 +0000 (15:32 +0200)]
Bug 9247 - Add two more usage examples to the manpage for koha-mysql
It might not be immediately obvious that it is possible to send
SQL queries "directly" to the koha-mysql command, or that files
from mysqldump can be loaded with it. This patch adds these as
"example usage" to the man page for koha-mysql.
To test:
Run these commands and look at the formatted man page:
$ xsltproc /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl \
debian/docs/koha-mysql.xml
$ man -l koha-mysql.8
Make sure this test passes:
$ prove -v xt/verify-debian-docbook.t
This patch also corrects a couple places where "Koha" was written as "koha".
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan, all tests and QA script pass.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The new tests pass nicely, as do all old tests and the QA script.
All patches marked as dependencies have been pushed to master
already.
Jonathan Druart [Tue, 9 Jul 2013 10:02:00 +0000 (12:02 +0200)]
Bug 10557: remove unused branch parameter from GetBooksellersWithLateOrders
C4::Booksellers::GetBooksellersWithLateOrders has an unused parameter.
The $branch variable is never used in the routine.
Test plan:
Check that no behavior changes on the late orders page.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I couldn't find any use of the branch parameter apart from
the one corrected by this patch. Also tested late orders,
couldn't find any problems.
Galen Charlton [Fri, 15 Mar 2013 21:17:09 +0000 (14:17 -0700)]
Bug 9820: display titles in MARC21 name headings better in XSLT mode
Prior to this patch, if a 100/700 had a $c, it would be
displayed with no space between the contents of $a and $c in XSLT mode.
For example,
100 1#$aSeuss,$cDr.
would be displayed as
SeussDr
The problem was caused by the original version of the stylesheets
drawing a bit too much from the MARC21 to MODS transformation.
To test:
[1] In a MARC21 database, turn on XSLT display mode for
staff and OPAC.
[2] Create or identify a bib that has a 100 or 700 field
with both a $a and a $c.
[3] Before applying the patch, verify that the name is
displayed in bib details and search results with the
name and title squashed together. For example, "SeussDr"
[3] After applying the patch, verify that the name displays
in bib details and search results with a space and
intervening punctuation between the name and the title. For
example, "Seuss, Dr."
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes test plan, works nicely.
Fridolyn SOMERS [Fri, 16 Aug 2013 11:53:04 +0000 (13:53 +0200)]
Bug 10741: reformat test for displaying place hold link in OPAC search results
To test:
[1] Turn on the syspref for enabling OPAC holds.
[2] Create an item and bring it up on the OPAC search
results. Run through the following possibilities,
by changing the item, and verify that the place hold
link in OPAC search results appears only when the item is
- not lost AND
- not withdrawn AND
- not damaged (or is damged and AllowHoldsOnDamagedItems is ON) AND
- the item is not marked not-for-loan OR
the item has a negative notforloan value (e.g., it is on order)
Note that it is necessary to reindex the test bib after making
each change to the test item.
[3] Also verify that whether or not in the item is in transit does
NOT affect whether the place hold link appears.
[4] Verify that there is no regression on bug 8975 (i.e., if an
item is on order, that status should be displayed in staff client
search results).
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 397ba93f97855625865689ef0dd0c69a20c8a915) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 65e0bbb2632611e8d9bd082aa882e7908350b9ee) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 65e0bbb2632611e8d9bd082aa882e7908350b9ee)
Fridolyn SOMERS [Fri, 16 Aug 2013 11:36:10 +0000 (13:36 +0200)]
Bug 10741: restore holdability of in-transit items on OPAC search results
In search results, one could not place a hold on an item in transit
and for loan (items.notforloan=0). This appears when AllowOnShelfHolds
is allowed.
This patch repairs a regression introduced by the patch for bug 8975.
Test plan :
- Set AllowOnShelfHolds to on
- Create a record with a normal item : not lost, not withdrawn, not
damaged, notforloan=0
- Index this record
- Perform a search on OPAC that returns this record (and others)
=> You see in actions "Place hold"
- Add this item in transit : /cgi-bin/koha/circ/branchtransfers.pl
- Re-perform the search on OPAC
=> You see in actions "Place hold" and item "in transit"
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 239513dc7a13a1a31356b59ab8e36b120c0fa281) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit e143ff307286698575a41e943202c902f1493071) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit e143ff307286698575a41e943202c902f1493071)
Kyle M Hall [Tue, 23 Jul 2013 12:05:22 +0000 (08:05 -0400)]
Bug 10628: make sure AutomaticItemReturn doesn't prevent holds queue from filling local holds with local items
For some reason, C4::HoldsQueue::MapItemsToHoldRequests used the system
preference AutomaticItemReturn to decide if an attempt to fill local
holds with local items. No explanation of this behavior is provided.
This patch removes this behavior, and also adjusts the calculation
of the lead-cost library to always return the pickup library if it
is on the list of libraries that could fill the hold -- on the
basis that if the item is already at the pickup library, its
transport cost is inherently zero.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and adds unit tests.
Tested with some examples and those worked correctly.
Owen Leonard [Mon, 19 Aug 2013 14:55:52 +0000 (10:55 -0400)]
Bug 8670 - Update POD of C4::Branch::GetBranches() to use TT syntax
This patch updates the example template syntax in the POD for
C4::Branch::GetBranches() to use Template Toolkit syntax.
To test, view the POD for C4::Branch::GetBranches() and confirm that it
looks correct.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Checked the POD with "perldoc C4/Branch.pm" before and after applying
the patch. The example now uses TT syntax, and looks sensible.
Owen Leonard [Mon, 19 Aug 2013 15:16:51 +0000 (11:16 -0400)]
Bug 10763 - [SIGNED-OFF] Update POD of C4::Creators::Lib::html_table() to use TT syntax
This patch updates the example template syntax in the POD for
C4::Creators::Lib::html_table() to use Template Toolkit syntax.
To test, view the POD for C4::Creators::Lib::html_table() and confirm
that it looks correct.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Checked the POD with "perldoc C4/Creators/Lib.pm" before and after applying
the patch. The example now uses TT syntax, and looks sensible.
Owen Leonard [Mon, 19 Aug 2013 15:37:55 +0000 (11:37 -0400)]
Bug 10764 - Update POD of C4::Items::GetItemStatus() to use TT syntax
This patch updates the example template syntax in the POD for
C4::Items::GetItemStatus() to use Template Toolkit syntax.
To test, view the POD for C4::Items::GetItemStatus() and confirm that it
looks correct.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
This patch works as advertised (verified with "perldoc C4::Items"),
for GetItemStatus, but it does not fix a a similar example for
GetItemLocation in the same file, which still has the old template
syntax. So a followup or separate bug for that is called for.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
It seems the default option is not in used in templates.
Owen Leonard [Mon, 19 Aug 2013 16:06:31 +0000 (12:06 -0400)]
Bug 10765 - [SIGNED-OFF] Update POD of C4::Koha::GetSupportList() to use TT syntax
This patch updates the example template syntax in the POD for
C4::Koha::GetSupportList() to use Template Toolkit syntax.
To test, view the POD for C4::Koha::GetSupportList() and confirm that
it looks correct.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
This patch works as advertised (verified with "perldoc C4::Koha"),
for GetSupportList, but it does not fix a a similar example for
GetItemTypes, getauthtypes and getframework in the same file,
which still has the old template syntax. So a followup or separate
bug(s) for those are called for.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
It seems the default option is not in used in templates.
Owen Leonard [Tue, 13 Aug 2013 16:27:28 +0000 (12:27 -0400)]
Bug 10081: add library name to IndependentBranches error message
With IndependentBranches turned on, if you try to check out an item
which belongs to another library you will get an error message which is
missing the library name. This patch corrects the problem by passing the
necessary variable to the template and outputting the library name using
the KohaBranchName TT plugin.
To test, turn on IndependentBranches and try to check out an item
belonging to another library (note that you must test with a staff user
who is not a superlibrarian). The error message you see should include
the name of the library to which the item belongs:
"This item belongs to Nelsonville and cannot be checked out from this
location."
Checkouts of items belonging to the library should be unaffected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 50ff4f4a94598ce197c0ca5656d314195cf69d07) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 624af4b7f11a4ff8bccf3252e72880cec9c22b1b) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 624af4b7f11a4ff8bccf3252e72880cec9c22b1b)
Jonathan Field [Fri, 9 Aug 2013 10:38:31 +0000 (11:38 +0100)]
Bug 10704: make OPAC highlighting work across previous/next travel
To test
Enable 'OpacHighlightedWords'
1) Run a search with multiple results
2) Click on a title of one of the results to get the full record
display. Hit highlighting SHOULD work on this page.
3) Use either the "Next" or "Previous" buttons on this page
(opac-detail) to move to the next or previous record.
4) Moving forward or back, the highlighting should still be working on
the page.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7d0aea7c39e22f42760c3ecbba4c0cd0818785a7) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 885e928aaeddca5adc24061b615a0388d1c8e828) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 885e928aaeddca5adc24061b615a0388d1c8e828)
Galen Charlton [Wed, 14 Aug 2013 14:53:25 +0000 (14:53 +0000)]
bug 10728: fix additional log noise generated by subscription-renew.pl
To test:
[1] Use the renew link to bring up the subscription renewal form.
[2] Verify that a warning message containing the text
'Problem = a value of 1 has been passed to param without key'
was not added to the Apache error log.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 6e864430caaa951b06d5fecff3fe7864317e5e26) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 3cd7313007061c0e644d0daf37cf79739c342717) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 3cd7313007061c0e644d0daf37cf79739c342717)
Colin Campbell [Wed, 14 Aug 2013 14:26:34 +0000 (15:26 +0100)]
Bug 10728: fix log noise generated by subscription-renew.pl
Error log is showing warnings because mode is undefined
and we are doing string comparisons on it.
Set it to a default value (we were already assigning it a variable
which we were not using) and use the the result in the comparison
To test, after applying the patch:
[1] Use the renew link from the subscription detail page to renew
a subscription.
[2] Verifying that doing this did not add a warning containing
'subscription-renew.pl: Use of uninitialized value $mode in string eq '
to the Apache error log.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 27edb618dd604e0a718f43e98ed97255f72eb515) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 70681a47f2cefcdee665d4d8076f3228eee891de) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 70681a47f2cefcdee665d4d8076f3228eee891de)
Bug 10573: French translation for printing a basketgroup
If you want to print a basketgroup with pdf format, it will be in
English. The pdf is done with layout2pages.pm or layout3pages.pm,
which call layout2pages.pdf or layout3pages.pdf.
This patch adds layout3pagesfr.pm in src/acqui/pdfformat/ which
calls layout3pagesfr.pdf.
And adds in basketgroup.pl the check for layout3pagesfr
To use it you have to change the systempreferences to pdfformat::layout3pagesfr
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described, koha-qa reports some tab errors.
Corrected in a followup.
Please, always add a test plan, it's easier to test.
Test:
1) apply the patch
2) change syspref OrderPdfFormat to pdfformat::layout3pagesfr
3) select a vendor
4) create a basket group (empty works)
5) close basket group
6) print basket group
7) PDF is in french
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works nicely, although it would be better if we could
find a more general solution to make the templates editable
and translatable.
Jonathan Druart [Thu, 11 Apr 2013 10:00:45 +0000 (12:00 +0200)]
Bug 10028: fix how ModReceiveOrder() calls NewOrder()
In C4::Acquisition::ModReceiveOrder, a call to NewOrder is badly used.
NewOrder returns ($basketno, $ordernumber) but in ModReceiveOrder the
ordernumber is got with
my $ordernumber = NewOrder( $args );
It works because:
sub t{
return ("a", "b");
}
my $a = t();
say $a;
Will display 'b'.
But it is not really clear.
Test plan:
Check that there is no regression for partial receives.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 29689de399a8927547c36e53461c7766ecc604f0) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 27f96f606c90f85756b290e1a832377f5465bf40) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 27f96f606c90f85756b290e1a832377f5465bf40)
Bug 10686: Remove fields from searches for highlighting
If you do a fielded search like au:smith, "Smith" will not get
highlighted on the results page because the Javascript is looking for
the exact string "au:smith."
To test:
1) Turn on OpacHighlightedWords.
2) Do a simple keyword search.
3) Confirm that the word is highlighted on the results and details page.
4) Do a fielded search by entering au:smith (or whatever).
5) Confirm that the word is highlighted on the results and details page.
6) Sign off.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Bug 10642: fix inappropriate uses of $sth->finish() in C4::RotatingCollections.pm
From the man page
finish()
Indicate that no more data will be fetched from this statement handle
before it is either executed again or destroyed.
You almost certainly do not need to call this method.
Adding calls to "finish" after loop that fetches all rows is a common
mistake, don't do it, it can mask genuine problems like uncaught fetch errors.
To test:
Verify that prove -v t/db_dependent/RotatingCollections.t passes
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, passes UT provided by bug 10653
Bug 10653: add unit tests for C4::RotatingCollections.pm
The tests are wrap in a database transaction.
Test plan:
prove t/db_dependent/RotatingCollections.t
t/db_dependent/RotatingCollections.t .. ok
All tests successful.
Files=1, Tests=41, 20 wallclock secs ( 0.02 usr 0.01 sys + 0.41 cusr 0.02 csys = 0.46 CPU)
Result: PASS
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 12061f44beb46709e03d09f7ff61551fa9297b2e) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit eb0373c7eb6d1f0cb52155709c18e06c09ab55df) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit eb0373c7eb6d1f0cb52155709c18e06c09ab55df)
Marc Veron [Sun, 7 Oct 2012 17:54:44 +0000 (19:54 +0200)]
Bug 8887: only display desired result when doing exact syspref search
This patch fixes an issue where entering the complete name of a system
preference when doing a syspref search in the staff interface resulted
in the display of *all* preferences belonging to the desired one's
module.
Since providing a more specific search string should result in getting
back more specific results, the previous behavior was not intuitive.
Test scenario:
a) In sysprefs, do a search with partial match (e.g. intranetcolor)
-> Result shows one entry: intranetcolorstylesheet
b) Do an exact search. e.g. intranetcolorstylesheet
-> Result shows all Staff Client preferences
Apply patch, test again. Now b) behaves like a).
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Owen Leonard [Tue, 13 Aug 2013 14:05:58 +0000 (10:05 -0400)]
Bug 9238 - make fund pull down say 'select fund', not 'select budget'
When adding a new order to a basket the fund selection field is labeled
"Fund:" but the default option is "Select a budget." This patch changes
this string to "Select a fund" and also corrects the associated
JavaScript error message text displayed when one doesn't choose a fund.
To test, add an order to basket. The "New order" form should show
"Select a fund" as the default option for "Fund" in the "Accounting
details" section. If you submit the form without selecting a fund the
error message should read "You must select a fund."
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
tests pass
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
String updates only, passes koha-qa.pl
Jonathan Druart [Mon, 17 Jun 2013 12:56:22 +0000 (14:56 +0200)]
Bug 10481: FIX No enrollment fee when changing patron category.
When a patron changes to a category with enrollment fee, they
are not generated.
Test plan:
- Choose a category without fee (e.g. Kid)
- Add an enrollment fee for another category (e.g. Young adult)
- Choose a kid and change his category to "Young adult".
- Note the warning message "Fees & Charges: Patron has Outstanding fees
& charges of XX" on the check out page.
This patch also moves all instances of adding the enrollment fee
to a new routine in C4::Members, AddEnrolmentFeeIfNeeded(), so
additional tests include:
- Register a new patron and give it a category that has
an enrollment fee. Verify that the fee is charged.
- Renew the patron. Verify that the additional fee is charged.
- Register a new patron with a child patron category.
- Use the 'update child to adult' menu option to change the
patron's category to one that is fee-bearing. Verify that the
enrollment fee was charged.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit f8eb19163bd4e59e99b6dae90a5712b6a7be52f6) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 98397ed4b10b03fb0b00e9550b571c3cc47407dc) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 98397ed4b10b03fb0b00e9550b571c3cc47407dc)
This patch changes the MARC21 007 plugin editor so that it uses
1 character instead of 4 characters for position 01.
TEST PLAN:
1) Create new record/edit an existing record
2) Using the tag editor for the 007 field, choose "Videorecording"
3) Click OK
4) Change the second character in the 007 from "c" to "d"
5) Open the tag editor again
6) Note that position 01 will still say "c - Videocartridge" rather
than "d - Videodisc".
7) Exit tag editor
8) Apply patch
9) Reload the page (Shift + Refresh is always useful)
10) Open the tag editor again
11) Note that position 01 will now say "d - Videodisc"
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 73ac970f734b0f04fff5561aa35bb9d9d47aa943) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fix worked as expected.
(cherry picked from commit 8a407d8d02463cd15423735dc6030da2c8f5e3a7) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 8a407d8d02463cd15423735dc6030da2c8f5e3a7)
Fridolyn SOMERS [Mon, 17 Jun 2013 15:01:33 +0000 (17:01 +0200)]
Bug 10483: fix item uniqueness check on order form
When syspref "UniqueItemFields" is defined, the item uniqueness is
tested in acquisition by an AJAX call to check_uniqueness.pl. This
patch fixes an issue where check_uniqueness.pl wasn't looking
at the correct CGI parameters.
Test plan :
- Select an existing item with barcode
- Add "barcode" to "UniqueItemFields" syspref (use space as separator
for multiple values)
- Set "AcqCreateItem" syspref to "Create an item when placing an order"
- Go to an acquisition basket
- Create a new order from empty
- Enter existing barcode in item form and save
=> You get an alert that barcode already exists and order is not saved
- Enter a non-existing barcode in item form and save
=> Order and item are created
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 1c9135262b9233f59fd05e34c90980e7dc8be338) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit df428a49e5c8b9106771d308bd1c1dea62d64429) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit df428a49e5c8b9106771d308bd1c1dea62d64429)
Janusz Kaczmarek [Mon, 22 Apr 2013 17:28:08 +0000 (20:28 +0300)]
Bug 5262: make authority plugin copy indicators to bib record
With this patch Koha should correctly copy indicators
(and create $2 subfield in MARC 21 if need) from the chosen authority
record to the edited bibliographic record (according to discussion in
bugzilla). UNIMARC and MARC 21 flavors are covered.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: work as described, testing in comments 9 and 12.
No errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests. Tested functionality repeating
some of the tests noted by Bernardo - checking mostly 1xx, 490,
and 7xx.
Kyle M Hall [Wed, 26 Jun 2013 20:40:09 +0000 (16:40 -0400)]
Bug 10511: fix message preference form glitch concerning phone notifications
An error in the onclick for phone notices causes the "Do not notify"
checkbox to be checked when the phone checkbox is checked. Also,
checking "Do not notify" does not uncheck the phone checkbox.
Test plan:
1) Enable TalkingTechItivaPhoneNotification
2) Browse to the new patron screen ( memberentry.pl )
3) In the patron messaging preferences check the Phone checkbox
4) Not the "do not notify" checkbox is then checked
5) Uncheck the "do not notify" checkbox, and check the Email checkbox as well
6) Now check the "do not notify" checkbox, note the Phone checkbox remains checked
7) Apply this patch
8) Repeat steps 3-6, noting the odd behavior is no longer present
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit e608f4d48c09e025fc10d47668bb40c0d3d686a7) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected. EnhancedMessagingPreferences needs to be set to reproduce.
(cherry picked from commit 475bb4e6bf79a21fed261e91ed466950374636ec) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 475bb4e6bf79a21fed261e91ed466950374636ec)
Owen Leonard [Fri, 2 Aug 2013 18:25:37 +0000 (14:25 -0400)]
Bug 7257: Add a link to remove an individual title from a list in the OPAC
It should be possible when viewing the contents of a list to click a
link to remove an individual title from the list without having to check
a checkbox and click another button.
This patch adds a link to each list item to "Remove from this list."
The functionality is JavaScript-dependent, automatically checking the
appropriate checkbox and submitting the form to delete.
To test, view a list for which you have delete permission. There should
be a "Remove from this list" link next to each item on the list. Test
delete functionality by:
- Clicking the link and then clicking cancel.
- Clicking the link and confirming.
- Checking more than one checkbox and then clicking a single remove
link (only the one corresponding record should be removed).
- Checking one or more checkboxes and clicking the "Remove from list"
link at the top of the page.
If JavaScript is disabled the links should not appear.
There are now two delete confirmation messages: One if you're removing
only one item, another if you're removing more than one. This is true
whether you use the links or the checkboxes.
Bug 10543 - add mandatory subfield check to addorderiso2709.pl
When adding orders from staged file, you can create one order per
record using item form in the bottom of addorderiso2709.pl. The
form was missing checks of mandatory item fields; this patch
adds those checks.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All 3 patches pass tests and QA script.
Some additional notes on the test plan from the first patch:
It took me a while to figure out a combination of subfields
that would trigger the bug. I am not sure about the condition
that transforms the input field into a textbox as it does
not seem to happen for every field.
What worked in the end was (MARC21):
- $g cost, normal purchase price = mandatory
- $h serial enumeration/chronolgy = optional, filled with
text over 100 characters
Checked for:
- Adding items in cataloguing
Was able to reproduce the problem, mandatory check works
as expected.
- Adding items from staged file in acq
Was not able to trigger the problem, because we don't edit
the item here, but mandatory check works as expected.
- Addings items for serial subscriptions
Was not able to trigger the problem, because we don't edit
the items here, but mandatory check works better as before
as missing mandatory fields are now highlighted and weren't
before.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 2c7e1390b45e497676ea4f414520708577cf761a) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Couldn't reproduce using $i as in the test plan, but $o triggered the problem, which this patch series fix.
(cherry picked from commit 561c436e933e6c1305808f13afd9cabf95e81e8e) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 561c436e933e6c1305808f13afd9cabf95e81e8e)
Use of CheckMandatorySubfields from cataloging.js
everywhere an item cataloging form is checked for
mandatory fields.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 0d4724e81b94b290a5b58970a8f59ebe8340f165) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Couldn't reproduce using $i as in the test plan, but $o triggered the problem, which this patch series fix.
(cherry picked from commit 85420d30ecf1bdd62eca323c5703f684414953b3) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 85420d30ecf1bdd62eca323c5703f684414953b3)
Bug 10543: fix false warnings from checks of mandatory item fields
Under certain circumstances, when editing an item, you get a popup
warning
"1 mandatory fields empty (highlighted)".
Even though all mandatory fields are filled in.
This occurs when there is a field with a huge content (more than 100
characters) that gets displayed in a textarea instead of input.
This patch corrects the Javascript form check by using siblings().
Also adds a more precise filter to find mandatory inputs because
looking in full page may bring unwanted results.
Test plan :
- In a framework, make sure you have in item field :
An optional subfield (without authorised value),
then a mandatory subfield, then an optional subfield
next to mandatory subfield
For example : $i (optional), $r (mandatory) and $s (optional)
- Open a biblio record and create a new item
- Enter more than 100 characters in $i, fill $r and $s
- Click "Add item"
- Edit this item
=> You get a textarea for $i
- Empty $s and Save
=> Without patch, you get a warning and form is not saved and you see that $s is yellow while it should be $r
=> With patch, form is saved
- Re-edit this item
- Empty $r and save
=> You get a warning and form is not saved
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Notes on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 651ea298ea90742a2c56bbb693a4fbbb0064d5b2) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Couldn't reproduce using $i as in the test plan, but $o triggered the problem, which this patch series fix.
(cherry picked from commit 9f5f05d40d2ee8a357d25472cd200a7f748de0e2) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 9f5f05d40d2ee8a357d25472cd200a7f748de0e2)
Kyle M Hall [Fri, 16 Aug 2013 11:21:10 +0000 (07:21 -0400)]
Bug 10664 [QA Followup] - fix error in overdue_notices.pl if there is no active currency
Fixes the following koha-qa.pl error:
FAIL misc/cronjobs/overdue_notices.pl
OK pod
OK forbidden patterns
OK valid
FAIL critic
# Variables::ProhibitConditionalDeclarations:
Sophie Meynieux [Wed, 31 Jul 2013 06:04:25 +0000 (08:04 +0200)]
Bug 10664: fix error in overdue_notices.pl if there is no active currency
If there is no active currency, when running overdue_notices.pl
you get a sofware error "Can't use an undefined value as a HASH
reference" on GetCurrency() function call.
With this patch, if there is no active currency, fines are formated
by default 0.00 and notices are correctly generated.
Test plan :
- have at least one borrower with overdue that should trigger a notice
- verify that there is no active currency (Adminitration > Currency &
Exchange rates)
- run misc/cronjobs/overdue_notices.pl -v -n (to get the notice directly
on output)
=> without the patch you get the software error
=> with the patch, notices are correctly generated
If an active currency is defined, the script overdue_notices.pl runs
the same with or without patch
Fridolyn SOMERS [Tue, 28 May 2013 13:43:05 +0000 (15:43 +0200)]
Bug 10362: ensure that all messages and alerts are shown upon checkin
If an item is returned and has mutiple error or warnings (e.g.,
it both needs to be transferred and the patron was debarred
in the course of the return), because of a bug in the template,
not all of the messages would be displayed.
This patch changes the template to show both messages and alerts.
Test plan :
- Perform an checkout that will a checkin :
* need a transfert (return in a different branch)
* set user debarred (depends on issuing rules)
- Perform check-in
=> You get tranfert message and debarment alert
Colin Campbell [Mon, 12 Aug 2013 15:15:37 +0000 (16:15 +0100)]
Bug 10712: Save missing config variables to install log
The variables for AUTH_INDEX_MODE and ZEBRA_TOKENIZER were not
being saved to the koha_install_log file. As a result when using the
--prev-install-log option in Makefile.PL the user was still prompted
to select them.
This patch adds the appropriate variables to the list saved in
the install log.
To test:
On a (non-package) system installed/upgraded without the patch running
'perl Makefile.PL --prev-install-log /path/to/koha-install-log' will
still prompt you to choose authorities indexing mode and select
between chr and icu, after upgrading with this patch applied the same
command should get the responses from the install log and not require
user intervention.
The values can be seen written into misc/koha-install-log
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 40e6f6a8f22b8af7adef79a0ece80a61a69ccc50) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 521d260a5931119c688fd872c30041ffe1c5c692) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 521d260a5931119c688fd872c30041ffe1c5c692)
Bug 10643: fix inappropriate uses of $sth->finish() in C4::ClassSource.pm
This patch gets rid of finish() and replace prepare_cached by prepare.
From the man page
finish()
Indicate that no more data will be fetched from this statement handle
before it is either executed again or destroyed.
You almost certainly do not need to call this method.
Adding calls to "finish" after loop that fetches all rows is a common
mistake, don't do it, it can mask genuine problems like uncaught fetch errors.
Bug 10666: avoid random failures of Daily quotes tests
In t/db_dependent/Koha.t, the test "Got a quote based on today's
date" is failing :
$prove t/db_dependent/Koha.t :
t/db_dependent/Koha.t .. 1/6
# Failed test 'Got a quote based on today's date.'
# at t/db_dependent/Koha.t line 126.
# Compared $data->{"source"}
# got : 'Herbert Hoover'
# expect : 'Abraham Lincoln'
# Be sure to run this test on a clean install of sample data.
# Looks like you failed 1 test of 4.
Looks like the wrong quote is returned by GetDailyQuote().
I'm using a databased created with the English sample SQL datas.
I think I found the cause :
The test "Got a random quote." calls GetDailyQuote('random'=>1) which
changes the quote timestamp to now. When then testing GetDailyQuote(),
this quote (which may not be the one created by test) is the most
recent quote.
This patch moves the "Got a random quote." test after "Got a quote
based on today's date" to solve the problem.
To test:
prove t/db_dependent/ClassSource.t
t/db_dependent/ClassSource.t .. 1/24 prepare_cached(SELECT * FROM `class_sort_rules` WHERE `class_sort_rule` = ?) statement handle DBI::st=HASH(0x92dbedc) still Active at C4/ClassSource.pm line 249
prepare_cached(SELECT * FROM `class_sources` WHERE cn_source = ?) statement handle DBI::st=HASH(0x926876c) still Active at C4/ClassSource.pm line 137
attempting to use non-existent class sorting routine routine1
prepare_cached(SELECT * FROM `class_sort_rules` WHERE `class_sort_rule` = ?) statement handle DBI::st=HASH(0x92dbedc) still Active at C4/ClassSource.pm line 249
prepare_cached(SELECT * FROM `class_sources` WHERE cn_source = ?) statement handle DBI::st=HASH(0x926876c) still Active at C4/ClassSource.pm line 137
t/db_dependent/ClassSource.t .. ok
All tests successful.
Files=1, Tests=24, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.12 cusr 0.01 csys = 0.15 CPU)
Result: PASS
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5de06b87e29f12250a35df3239372a7ed0754811) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit aeb11a6a9236bcf7f6c822a55e3d270406956db2) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit aeb11a6a9236bcf7f6c822a55e3d270406956db2)
Kyle M Hall [Thu, 13 Jun 2013 13:46:43 +0000 (09:46 -0400)]
Bug 10463: ensure that Quote of the Day feature selects random quotes
When the Quote of the Day tool selects a new new quote, it updates the
timestamp and does not take the timezone into account. Thus the time is
set to +4 hours (e.g. 2013-06-11 13:33:48 when the time is 2013-06-11
09:33:48). It then repeats the same quote every day.
To replicate:
Set Administration >> System preferences >> OPAC preferences >> Features
>> QuoteOfTheDay to Enable
In Home >> Tools >> Quote Editor, add several quotes.
In the opac, refresh the home page. You should get a quote of the day at
the top.
mysql> select * from quotes;
Note the timestamp of the quote selected by the tool. It will not match
the date on the machine (unless your server's timezone is set to UTC).
If you change the date to the previous date and refresh the opac, the
tool wlill select another quote, which will not change unless forced.
Test Plan:
1) Remove all your quotes and import a fresh set
2) Enable the quote of the day and view the opac
3) Look at your quotes table and note the timestamp is incorrect
4) Repeat steps 1 and 2
5) Look at your quotes table and note the timestamp is now correct
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit def952bda9cd72a4f6916e93ad1c454a04a3cb43) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit f2ccae0ded3c9f099ba9eecfdf72b18c6cd8e797) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit f2ccae0ded3c9f099ba9eecfdf72b18c6cd8e797)
Bug 10621: use correct from-address for subscription alert emails
From-address and to-address were the same (patron's email) for
subscription alerts. This patch changes 'from' the branch or
kohaadminemailaddress
To test
- add a subscription in staff/serials in case you don't have any
- enable patron notifications or the subscription
- in the OPAC, subscribe to the serial
- in staff/serial, receive an issue of the serial
Before applying the patch, the email that is supposed to be sent
has the patron's email as 'from' and 'to' (and is likely to fail).
If you follow the steps after applying the patch, the email alert
should have the 'from' address of the patron's branch or
kohaadminemiladdress -- which should also work fine with the MTA/SMTP
you have set up for messaging.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 61fa246ac06d637d50c8eed68244f0577ed34e4d) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 75b31bb5cf4a6269dedeb95be374b654fe4b5091) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 75b31bb5cf4a6269dedeb95be374b654fe4b5091)
Owen Leonard [Fri, 28 Jun 2013 19:10:14 +0000 (15:10 -0400)]
Bug 10516 - Improve titles, breadcrumbs, and confirmation messages for Z39.50 server adds and updates
The template for adding/editing Z39.50 servers shows the same title,
breadcrumbs, etc. for add and edit operations. This patch creates
separate text for each case.
To test, try both adding and editing a Z39.50 server. The page title,
breadcrumb, and heading should correctly reflect the operation you
perform.
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely and all strings are translatable.
Owen Leonard [Thu, 11 Jul 2013 14:53:06 +0000 (10:53 -0400)]
Bug 10576: make strings in additem.js accessible to translation
There are a couple of untranslatable strings in additem.js. This patch
moves the strings out of the script and into the include file which has
been created for this purpose.
To test, apply the patch and test the process for adding an item to an
existing or new basket (with AcqCreateItem set to "when placing an
order."
The add item form should be correctly labeled "Add item." After adding
an item, click to edit it again. The form should now be labeled "Update
item."
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely and passes all tests.
Made sure strings can be translated testing with German templates.
Owen Leonard [Mon, 10 Sep 2012 12:34:33 +0000 (08:34 -0400)]
Bug 7598: make strings in acquisitions JavaScript translatable
English strings in acq.js cannot be processed by the translation script.
This patch moves the strings to the templates to be set as JS variables
for use by the script.
To test:
- On the uncertain prices page, enter an invalid price and click save.
You should see a JavaScript alert pointing this out.
- When adding a fund to an existing budget, enter an amount which
exceeds the amount in the parent budget. You should see a JavaScript
alert pointing this out. There is a similar function which has been
corrected, checkBudgetParent(), but I don't know how to trigger it for
testing.
The closebasketgroup function has been updated but as far as I can tell
it's not actually in use.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit f69e13665da007a6ab28e4c1d5a7d1a50f3ac3ac) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit d8eeb697c873b1ba9366bbce275a14d004931f40)
David Cook [Thu, 27 Jun 2013 06:02:08 +0000 (16:02 +1000)]
Bug 9801: display facet labels in search results only when there are facet values
Currently, the headings for facets (such as location) are showing even
if there are no actual values/links for that facet type.
This patch simply checks if the facet array contains any facets before
printing the heading and HTML for each facet value/link.
Test Plan:
Before applying:
0) If you want to check the location facet (which is easiest),
enable singlebranch mode in the globals system preferences.
1) Do a search for records/items that you have no shelving location
specified (or simply remove the shelving location for a small range
of records that you can find in a search query).
2) Note that "Location" appears amongst the facets even though there
are no values/links present. (If you look at the HTML source, you'll
see some empty HTML tags have been printed out.)
Apply patch.
3) Flush your cache and refresh your page.
4) You should no longer see a "Location" facet (or those empty HTML
tags) on the facet sidebar.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template changes only.
Checked according to test plan, made sure location facet
still shows up when values exist, otherwise it's hidden.
It might make sense to add ids to the facets so libraries
can decide to hide some of them easily. Or alternatively
add a system preference to make that possible.
David Cook [Thu, 13 Jun 2013 06:46:46 +0000 (16:46 +1000)]
Bug 10457: fix SQL error when using 'export select items data' in serials claims page
Currently, if you use the "check all" checkbox next to the "Vendor"
table header, and try to "Export selected items data", you'll
see the following SQL error in the Apache error log:
DBD::mysql::st execute failed: You have an error in your SQL syntax;
check the manual that corresponds to your MySQL server version for
the right syntax to use near 'on ORDER BY title' at line 12 at
/.../lib/C4/Serials.pm line 1828.
This is because the Javascript that produces the re-direct URL is
including the value of the checkall checkbox, which is "on",
as a "serialid".
We need to only take checkboxes with a name of "serialid" when
crafting the re-direct link.
This patch adds the [name=serialid] attribute selector to the Jquery
that creates the URL to lateissues-excel.pl from claims.pl.
Test Plan:
Before applying the patch:
1) Go to Serials > Claims (found on the left navigation bar of Serials)
2) Choose a vendor that has serials to claim (or create some late
serials for a vendor so that they will show up)
3) Click on the checkbox to the left of the "Vendor" table heading.
4) Click "Export selected items data" at the bottom of the page
5) Check the Apache error log. Notice that you'll get a SQL error
like the one in the message above.
Apply the patch.
Repeat Steps 1-4.
Note that you should now have a CSV file downloading rather than
getting a SQL error.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 3834d1f2b4494d465c6d1ab72aa334100898a756) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit fdb1d099c5489f200b7b36125ed4ccddd00e3d4c) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit fdb1d099c5489f200b7b36125ed4ccddd00e3d4c)
Owen Leonard [Mon, 8 Jul 2013 18:37:03 +0000 (14:37 -0400)]
Bug 10553: make public lists available on OPAC login page
If you are not logged in to the OPAC, looking at the login page, and you
click the Lists button to see public lists it says there are none. This
patch corrects Auth.pm so that it loads the list of public lists in this
situation.
To test you must have at least one public list. Make sure you are logged
out of the OPAC and visit the login page (/cgi-bin/koha/opac-user.pl).
Clicking the "Lists" button should show you a list of public shelves.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
works as described, and list button is not shown when opacpublic is disabled.
bug 10559: remove spurious "statement handle still active" warnings
Generating (e.g.) overdue notices can result in spurious warnings in
the cronjob logs:
$ ./misc/cronjobs/overdue_notices.pl -t -library CPL
prepare_cached(SELECT * FROM issues WHERE itemnumber = ?) statement handle DBI::st=HASH(0x54a7828) still Active at C4/Letters.pm line 589
This patch removes the warning by making sure that the relevant statement
handle is finished after fetching its first row of results.
To test:
[1] Set up an overdue loan such that running overdue_notices.pl will
trigger the generation of a notice.
[2] Run overdue_notices.pl -t and note the warning message.
[3] Apply the patch.
[4] Run overdue_notices.pl -t again and note that the warning message
is no longer displayed.
[5] Check the message_queue table and verify that the overdue
notices generated in steps 2 and 4 have the same text.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 2bab95cac5f43b034adec36ec62a8c8f7f520627) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 5e7452758949e037fcf286cead721b559dd7d0e3) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 5e7452758949e037fcf286cead721b559dd7d0e3)
Bug 10595: don't display OpacTopissue page when system preference is turned off
When the syspref is turned off, the link is hidden but the page is still
accessible. This patch checks the syspref and redirects to 404 if it is disabled.
Test plan:
Before applying the patch
Enable OpacTopissue
Observe there is a link to opac-topissues.pl next to Advanced search etc.
Follow that link, observe that opac-topissues.pl is loading
Disable OpacTopissue
Observe the link is gone
Manually open /koha/opac-topissues.pl and check that it is loading even though the feature is disabled
Apply patch
(OpacTopissue still diabled)
Manually open /koha/opac-topissues.pl and observe that you are being redirected to the 404 page.
Enable OpacTopissue
Follow the link or manuall open opac-topissues.pl and check that it is working
Signoff the patch.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 04ca81bc358f1bc6425e1cef431d9e4abfc744d8) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected
(cherry picked from commit 094bfd0d17689c92a4e9366af63ffb7fcbe99399) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 094bfd0d17689c92a4e9366af63ffb7fcbe99399)
bug 10549: make the ILS-DI services advertise that they return UTF-8
This patch changes a few occurences of ISO-8859-1 to UTF-8
within the XML generation of the ILS-DI module.
To test:
- Activate ILS-DI system preference
- Go to [youropac]/cgi-bin/koha/ilsdi.pl
- Check all examples in the documentation for the correct
encoding
- Check GetAvailability gives you the correct encoding and
check the source for the correct encoding
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 2a1d0fc6d2d2674d4182ed1c6be557b568778834) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 795c8e9bd0fd2d6669582f12fdcaf3fe28acf553) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 795c8e9bd0fd2d6669582f12fdcaf3fe28acf553)
David Cook [Fri, 5 Jul 2013 02:00:36 +0000 (12:00 +1000)]
Bug 10541: enable cross-browser AJAX in additem.js
Currently, the additem.js is using "indexOf" to search
for a value in an array. While this works in Chrome, Firefox,
and IE > 9, it fails miserably in IE 8 and 7 (which don't have
the indexOf method). This means that users aren't able to add
items using the acquisitions module!
Instead of using "indexOf", we should be using the jQuery function
$.inArray. It was added in jQuery v1.2 (3.8.0 uses v1.3.2 so even
our oldest supported release can use this method). It's perfectly
cross-browser compatible...works in Chrome, Firefox, and every
version of IE that I've tried (i.e. 7, 8, 9).
Test Plan:
Before applying patch:
0) Switch to Internet Explorer 7, or 8, or 9, or 10.
If you're using IE 9 or 10, you'll need to change the Document Mode to
IE7 standards or IE8 standards.
You can do this by opening Internet Explorer 9 or 10, pressing F12 (or
clicking on the gear in the top right corner and choosing
F12 Developer Tools), and then clicking on "Document Mode" on the
top toolbar. There, you can change to IE7 or IE8 standards.
N.B. This is not always a perfect emulation in every case, but this
time it does show you the bug.
1) Set the system preference AcqCreateItem to "receiving an order"
2) Go to Acquisitions
3) Either:
a) Receive a shipment for a basket with items
b) Create a new basket, create an order, close the basket, and
then do 3a)
4) In the "Item" fieldset, fill out some fields such as barcode,
Date acquiried, Public note, etc.
5) Click "Add" at the bottom of the fieldset
6) Note that while the item may have been added, the "Item" fieldset
is not being shown again. You may also notice a Javascript error
appearing in a pop-up window or you might see a yellow warning flag
on the bottom status bar.
APPLY THE PATCH
7) Do a full refresh of the page (hold down shift and press the refresh
button on the browser next to the address bar), and try adding items
again.
8) Note that you receive no warnings and that items are added correctly
as they would be in Firefox or Chrome.
OPTIONALLY
9) To be sure that I haven't broken anything, go through the same steps
in IE9 (with IE9 standards) or Chrome or Firefox. Everything should be
working.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested in IE10 in IE7 mode and IE9 mode. Also tested in Firefox.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
C4:Circulation:GetUpcomingDueIssues is used in the advance_notices.pl
script. This patch corrects an error in its handling of the maxdays
parameter that resulted in it picking up *all* upcoming due loans and
recently overdue loans.
Test plan :
- Create an issue with a date due in the paste
- Create an issue with a date due in two days
- Launch advance notices with due date in max 2 days : perl misc/cronjobs/advance_notices.pl -c -n -v -m=2
=> You get a warn "found 0 issues"
- Launch advance notices with due date in max 3 days : perl misc/cronjobs/advance_notices.pl -c -n -v -m=3
=> You get a warn "found 1 issues"
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
I did the following test :
- 1 book to check in 2 days
- 2 books to check in in the past
before applying the patch :
$perl ../misc/cronjobs/advance_notices.pl -c -n -v -m=2
getting upcoming due issues at ../misc/cronjobs/advance_notices.pl line 203.
found 1 issues at ../misc/cronjobs/advance_notices.pl line 205.
I changed the value of "-m" : 0, 1, 2, 3, 4
=> always 1 issue found (the book to check in in 2 days)
after applying the patch :
$perl ../misc/cronjobs/advance_notices.pl -c -n -v -m=2
found 0 issues
for m = 0, 1, 2 => 0 issues
$perl ../misc/cronjobs/advance_notices.pl -c -n -v -m=3
found 1 issues
for m = 3,4,5 => 1 issues (the book to check in in 2 days)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Chris Hall [Fri, 10 May 2013 00:29:57 +0000 (12:29 +1200)]
bug10246 adding OPAC details items table classes
for 3.10 (3.12 version is bug10245)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This patch applies cleanly to the 3.10.x codebase.
It's adding additional classes to the <th> elements.
Template only CSS related change.
Katrin Fischer [Wed, 10 Jul 2013 20:43:41 +0000 (22:43 +0200)]
Bug 10563: Fix broken 'Edit' link on check expiration page
This fixes the broken 'Edit' (subscription) link on the
check expiration page in serials.
To test:
- Add a subscription
- Go to the check expiration page
- Search for your subscription, use an expiration date in the
far future
- Verify the edit link on the result list doesn't work right
before applying the patch, but works after
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 81431fdc8654e95e9fea37c4de880e9cf6126b26) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 61cbdb6ac7996d8d2f8045d12ec36c5f3676b694) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 61cbdb6ac7996d8d2f8045d12ec36c5f3676b694)
Sophie Meynieux [Fri, 26 Apr 2013 13:06:40 +0000 (15:06 +0200)]
Bug 10127 : Printoverdues.sh should tar only pdf files
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
From the bug report:
At the end of printoverdues.sh, an archive is generated
containing all files present in directory given as parameter.
As archives are generated in this given directory, they
contain previously generated tar files, creating oversized files.
Only .pdf files should be archived
All tests and QA script pass.
Worked ok in my tests, only packign PDF in the given directory.
Galen Charlton [Mon, 20 May 2013 15:38:46 +0000 (08:38 -0700)]
Bug 10170: expose more managed staged MARC strings to translation
This commit makes it possible to translated the 'staged'
and 'error' record statuses as well as the 'auto_match'
overlay status.
Also takes out a bit of HTML cruft in one string that is
not needed for translation.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass. New strings are parsed into the po files:
"%s Always add items %s Add items only if matching bib was found %s Add items only if no matching bib was found %s Ignore items %s %s %s %s "
"%s No match %s Match applied %s Match found %s %s %s " Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7d990042e9dcc86e6f60b923763720d5c9ed6b2c) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit e2fac72763cd541eef32d7278dea33dadc1aa6cc) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit e2fac72763cd541eef32d7278dea33dadc1aa6cc)
Adrien Saurat [Thu, 2 May 2013 14:56:54 +0000 (16:56 +0200)]
Bug 10170: strings in MARC import made translatable
Following bug 9215: non translatable strings are now
present in the template and translatable
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Not only does this make the strings translatable it makes the template
a lot easier to read Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass. Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 24e561f4da56e442dc1a9d25afa63e8ab74d9236) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit f67769bc637c2acb7eb4593374f4d1db06d06266) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit f67769bc637c2acb7eb4593374f4d1db06d06266)
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 9f4f1ceafe218afcbc55d6dfb9ac1e32fc11803a) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit 3b6abb0ea18720eef688241aa2c2e6399d922fa0)
This routine is not in used and does not make sense. It should not be
used later.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, not references to get_branch_code_from_name found.
Owen Leonard [Tue, 2 Jul 2013 13:59:21 +0000 (09:59 -0400)]
Bug 10422 - Remove references to unused and non-existent wizard.css
doc-head-close.inc contains a reference to "wizard.css" which doesn't
exist. The option to include it never evaluates as true, and that
section can be removed from the template.
To test, apply the patch and view any page in the staff client.
Everything should be styled as before. A search of the Koha source
should return no references to "wizard.css" or a "wizard" variable.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
No occurrence of "wizard" in pl/pm files.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl
Fridolyn SOMERS [Wed, 5 Jun 2013 12:16:14 +0000 (14:16 +0200)]
Bug 6898: fix DB update that assigns the circulate/overdues_report permission
This patch fixes a bug that prevented the circulate/overdues_report
permission from being assigned to staff users during upgrade. This
patch will not affect databases that are already running 3.12.x
or later.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This will only fix the permissions for updates done
after the patch has been applied. But I agree with
Fridolyn, that we can not safely update permissions for
existing installations.
Mathieu Saby [Fri, 3 May 2013 21:07:37 +0000 (23:07 +0200)]
Bug 10189: Translate values in UNIMARC 128b/c cataloguing plugins to English
Cataloguing plugins for UNIMARC 128b and 128c fields are only in Ffrench.
This patch translates them.
Source : http://blue.lins.fju.edu.tw/mao/marc/unicon.htm
Note : 128b and 128c are deprecated in last version of UNIMARC Manual (field 145 used instread).
But they are still used in French Sudoc network.
To test : in a UNIMARC english Koha, edit a record and use 128b and 128c
cataloguing plugins. Check everything is in english.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Thx for translating those!
Verified new strings get parsed into the po files.
Templates still contain lots of tabs, those can be fixed separately.
Galen Charlton [Mon, 17 Jun 2013 01:05:31 +0000 (18:05 -0700)]
Bug 10258: offer to create basket group only when staff user has correct permission
If the staff user does not have the group_manage acquisition permission,
do not offer to create a new basket group when closing an order basket.
This avoids a situation where if a staff member without that permission tries
to close a basket and chose the option to create a bakset group, they would
be redirected to the login page.
To test:
[1] Log in as a staff user that does not have
the acquisition/group_manage permission.
[2] Create a new order basket, attach at least one
order line to it, then close it.
[3] Verify that the confirmation page does not
offer to create a basket group with the
same name as the order basket.
[4] Log in as a staff user that has the
acquisition/group_manage permission.
[5] Create and close an order basket.
[6] Verify that this time, the confirmation page
*does* offer to create a basket group.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 14a1bd0e420fd895f989ba88e0cad927697b6173) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit fdf6c3790a8e942be8a3615252b6c214064dd21e) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit fdf6c3790a8e942be8a3615252b6c214064dd21e)
Galen Charlton [Thu, 13 Jun 2013 15:53:49 +0000 (08:53 -0700)]
Bug 10258: fix permissions check for setting basket group for order basket
Improve the code that displays and allows staff to
set the basket group from the basket details page
for a closed basket.
Prior to this patch, a staff member who did not
have the group_manage acquisition permission would
still see a control to change the group that the
basket belongs to; attempting to change the group
would present with with a login page.
This patch also does some tidying of how basket group
details are passed to the template.
To test:
[1] Create an order basket and close it. Do
not assign it to a basket group.
[2] View the basket details while logged in as
a staff user who has the order_manage acquisitions
permission but not the group_manage. The
displayed basket group should be "No group".
[3] Switch to a staff user who also has the
group_manage permission, then view the basket
details again. The basket group field should
now be a select input that allows you to change
the basket group.
[4] Change the basket group. Verify that the basket group
you selected is now displayed as the current group
for that order basket. The basket group delivery and
billing place fields should also now be displayed.
[5] Close the basket group set in the previous step, then
view the basket details again. This time, the basket
group name should be displayed with a suffix of " (closed)",
and no input to change the group should be displayed.
[6] Swith to a staff user who does not have the group_manage
permission, view the basket details, and verify that
the basket name is displayed with a suffix of " (closed)".
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 44364db8d53bf5e3135ae2de6270a920e5c053c1) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit dfbb9890d970f3f70cb6eb02275679d65101489a) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit dfbb9890d970f3f70cb6eb02275679d65101489a)
Jason Etheridge [Fri, 8 Mar 2013 15:41:06 +0000 (10:41 -0500)]
Bug 9770: fix sorting of Dewey call numbers that contain prefixes
C4::ClassSortRoutine::Dewey can pad the wrong part of a call number internally.
The subroutine get_class_sort_key tokenizes a call number string (splitting on
periods and whitespace) and counts the number of tokens that solely contain
digits. If there is only one such digit group, a comment in the code states
that it will pad said digit group. However, the bug is that the code assumes
said digit group is the first token, when this may not be the case.
In practice, this can cause poor sorting when used a call number is in the form
of PREFIX _space_ 3DIGITS.
To test:
[1] Create two item records whose class scheme is set to
'ddc' (Dewey) and whose call numbers contain prefixes, e.g.,
J DVD 700.1 ABC and J DVD 850 DEF.
[2] Use the inventory tool to produce a list of item items that include
the two created in step 1. Obsere that that items are sorted
in the incorrect order, with "J DVD 850 DEF" coming before
"J DVD 700.1 ABC". Alternatively, run the following SQL
to see the incorrect sort order:
SELECT cn_sort, itemcallnumber
FROM items
WHERE itemcallnumber LIKE 'J DVD%'
ORDER BY cn_sort;
[4] Apply this patch.
[5] Run misc/maintenance/touch_all_items.pl to force cn_sort to be
recalculated.
[6] Repeat step 2 and verify that the call numbers are now sorted
corrected.
Signed-off-by: Jason Etheridge <jason@esilibrary.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit dba36a7a1216238a260ea5fbe2218627487e9f19) Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(cherry picked from commit f05642589d94c25ef1b1f01b4a2606fe455400b8) Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit f05642589d94c25ef1b1f01b4a2606fe455400b8)
projects / koha.git / log