Nick Clemens [Thu, 2 Mar 2023 17:01:07 +0000 (17:01 +0000)]
Bug 32565: Add unallocated option to holds queue
Add an unallocated option to CreateQueue and pass through as needed
Avoid deletion of the tmp_holdsqueue, and only check holds
and items that are not currently matched
A future hold with a higher priority will still fail here - because the
item may already be assigned, but on next change to the biblio it would
be corrected
To test:
1) Apply both patches
2) Enable RealTimeHoldsQueue and set HoldsQueueSkipClosed to "open"
3) Add a holiday to the calendar for all libraries for today, visit:
/cgi-bin/koha/tools/holidays.pl
-- Click today's day on the calendar and pick "Holiday repeated every same day of the week"
-- Click "Copy to all libraries". Hit "Save.
4) Place a biblio-level hold on a biblio record and set the pickup location to a library that has available copies, visit:
-- /cgi-bin/koha/reserve/request.pl?biblionumber=76&borrowernumber=51
-- Click the first "Place hold" button to place the biblio-level hold.
5) Verify that that hold got added to the holds queue, visit:
/cgi-bin/koha/circ/view_holdsqueue.pl?branchlimit=&itemtypeslimit=&ccodeslimit=&locationslimit=&run_report=1
6) Place a biblio-level hold on a biblio record where there are no other holds and copies are available at another location, but not the pickup location, visit:
-- /cgi-bin/koha/reserve/request.pl?biblionumber=437&borrowernumber=51
-- On the "pickup at" dropdown, pick something else other than "Centerville", e.g. "Fairfield".
-- Click the first "Place hold" button to place the biblio-level hold.
7) Check the holds queue again, notice that this 2nd hold was not added to the queue:
/cgi-bin/koha/circ/view_holdsqueue.pl?branchlimit=&itemtypeslimit=&ccodeslimit=&locationslimit=&run_report=1
8) Run the updated cronscript:
perl misc/cronjobs/holds/build_holds_queue.pl --force --unallocated
9) Notice nothing changed in the holds queue, visit:
/cgi-bin/koha/circ/view_holdsqueue.pl?branchlimit=&itemtypeslimit=&ccodeslimit=&locationslimit=&run_report=1
10) Remove the holiday we created previously, visit:
/cgi-bin/koha/tools/holidays.pl
-- Click today's day on the calendar and pick "Delete this holiday"
-- Click "Copy to all libraries". Hit "Save.
11) Run the updated cronscript:
perl misc/cronjobs/holds/build_holds_queue.pl --force --unallocated
12) Confirm the second hold is added to the holds queue, visit:
/cgi-bin/koha/circ/view_holdsqueue.pl?branchlimit=&itemtypeslimit=&ccodeslimit=&locationslimit=&run_report=1
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 939f1f389b848e06b7adcd7121ff7629a0ba4adf) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 75a6e3c3c478633ced797da843a772c2ace86cad) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle M Hall [Thu, 11 Aug 2022 19:43:15 +0000 (15:43 -0400)]
Bug 31345: Add ability to exit process_message_queue.pl early if any plugin before_send_messages hook fails
Sometimes it would be better for process_message_queue.pl to stop if a plugin hook fails rather than continue processing. It would be nice if that was a command line option.
Test Plan:
1) Install any plugin with a before_send_messages hook
2) Modify the plugin, add a 'die;' statement at the start of the
before_send_messages method of the plugin.
3) Run process_message_queue.pl as usual
4) Note the exit code is 0
5) Run it again with the new -e setting
6) Note the exit code is 1
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 83f9535fabc37be46ab8154d940a7ff614617eb2) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit ff2cce52c56e0cbfb7c8f760618b4b1e8db44d36) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle M Hall [Fri, 26 Apr 2024 18:41:42 +0000 (14:41 -0400)]
Bug 35582: Supress possible warning
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 615c7c5eafd207fdb1adc9a07a063ce83da668c0) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit f63dbed44ace3c041f7bcec3cc84bc211a5a86f0) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
lmstrand [Fri, 26 Jan 2024 08:36:00 +0000 (10:36 +0200)]
Bug 35582: Show advanced search languages with selected intranet language descriptions first
To test:
1. Check language dropdowns in advanced search, notice localized
names of the languages are shown first in the menus, then the
selected ui language translations if available or the english translation
2. Apply patch
3. Check language dropdowns, notice the selected ui language's
translations are shown first for the languages (if missing, english
translation), then the localized
language's name.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 9c445218deb8daa8704ae48433783e723d8e8649) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 2df2fbc309e06f6bb39e430349fb37a2efca3323) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 30598: remove all the console.log redundancies
Please test the patch. Thank you!
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e0d38c77e6c9fff2d7c39cf523c1517b322ca9c7) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 9e49fab3ac86bada15ada49e551cf46288651fa7) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 30598: Replacement cost is not copied from retail price when ordering from file
Test plan :
To test :
1- In Acquisitions, create a basket
2- Add an order from a new (empty) record
--> Note that when you enter the "vendor price", it is copied in the "replacement cost" field
3- Add an order from a new file
--> Note that when you enter the "price", the "replacement price" field stays empty
4- Apply the batch
5- Redo step 3 and notice that when you change the 'price', the
'replacement price' syncs with it
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit bed0563e568c4ee13a851d22025d66f36651beec) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit cf64df296cd1c97016ae245da847a3ce4ba4ba9d) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Owen Leonard [Wed, 3 Jan 2024 16:01:56 +0000 (16:01 +0000)]
Bug 35689: Add id and classes to each MARC note in OPAC bibliographic details
Building on Bug 14156, this patch updates the OPAC bibliographic
detail page's display of MARC notes to add the tag number in both a
class (for consistent styling across the same tag number) and id (for
unique styling for each repeated tag).
To test:
- As a quick test for custom CSS, go to Administration -> System
preferences and locate the OPACUserCSS preference.
- Add this testing CSS:
- Locate a record with multiple notes fields. In the sample data, record
46, "Viridiana" is a good example which works well with the above CSS.
- On the bibliographic detail page for the record, click the
"Descriptions" tab.
- Each MARC note should be colored according to the tag it comes from.
- Inspect the HTML to confirm that each paragraph also has its own
unique ID.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit dfd4894acbab3af5355b72c859a0a17deef70af5) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 0a5dbec79759cba07da5f062f2ac2e242228d1cf) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 36295: Space out content blocks in batch record modification
This patch adds a float clearing class to a line break in the batch record modification template to fix a spacing issue in Chrome.
To test apply the patch and go to Cataloging -> Batch record modification
There should be space between the two sections.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 566894f058759c05922ec3399ba4ca96d27978f6) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 813d06de274ed243ba38220e2b9e9f03372baddf) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Owen Leonard [Tue, 9 Apr 2024 12:02:40 +0000 (12:02 +0000)]
Bug 36295: Space out content blocks in batch record deletion
This patch adds a float-clearing line break to the batch record deletion
template so that the "Record type" section has visual separation from
the record number submission tabs.
To test, apply the patch and go to Cataloging -> Batch record deletion.
There should be padding between the two sections.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 55fbfffa0efe2efc09baa3a5e4d01595152165e7) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 8b11a0f8eacc3deff912a0ec6fd4c70e4e59d59e) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Martin Renvoize [Tue, 30 Apr 2024 15:13:25 +0000 (16:13 +0100)]
Bug 35977: (follow-up) Cleaner working approach
This patch removes the Date_from_syspref recently added and replaces it
with the correct parseDate call as per bug 35559. We also clean up the
code around setting the input value in the first place and use iso which
is what the rest of flatpickr expects and now is handled correctly in
futuredate pickers.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 1ff3d65c7073e5d93502d329b917d886a3665e0b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 3880307a9f47433fed1e91dbeaf3fb743c0cd355) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Martin Renvoize [Wed, 7 Feb 2024 15:21:04 +0000 (15:21 +0000)]
Bug 35977: Set holddatefrom default to today
This patch sets the holddatefrom date to today by default on the opac.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c341b2d37584aca52fcac7243f7ab68f324d002c) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 648feb2594ea9454ec7de4996cd6f39deb8450e7) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Owen Leonard [Mon, 15 Apr 2024 14:21:03 +0000 (14:21 +0000)]
Bug 16567: Correct RSS feed validity errors
This patch corrects a few markup errors in the XML feeds to make the
feeds validate correctly. The template has been largely re-indented to
improve readability and eliminate tab characters.
To test, apply the patch and perform a search in the OPAC.
- Open the RSS link appearing after the "Your search returned..."
header.
- Depending on how your browser handles XML documents you may need to
view source on the page to see the actual XML markup.
- Copy the source and paste it into the W3C feed validator:
https://validator.w3.org/feed/#validate_by_input
- The feed should be found to be valid.
- In my tests you'll get a "Recommendation" about "Self reference
doesn't match document location." I think this recommendation
doesn't apply.
Perform the same test with the other two available formats: Atom and
OpenSearch:
- Change the end of the RSS feed url from '&format=rss' to
'&format=atom' and validate the result.
- The same "self reference" recommendation will come up, and again I
think we can ignore it.
- There is another recommendation about "Two entries with the same
value for atom:updated." The updated time is set to the same time
as the feed itself (the time when the feed was generated. Maybe
this is incorrect. If so we need a follow-up that exposes a
different value to the template. biblio.datecreated maybe?
- Change the end of the feed url from '&format=atom' to
'&format=OpenSearchDescription' and validate that result.
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit ee960bd45f7535aec058d3984891e21b255ace12) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 1557d835a886229209fa887ca315b3766b2037df) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 26 May 2023 19:00:13 +0000 (19:00 +0000)]
Bug 32695: Fix search strings for 775, 780, 785 and 787
In the past due to some misunderstanding of the MARC standard
we built the search links for these fields using $a and $t with
the title index. But we actually need to search $t as title
and $a as author.
This patch fixes the templates for the MARC 7xx fields:
* 775
* 780
* 785
* 787
To test:
* Ensure systme preference 'UseControlNumber' is set to don't
* Create a record with the linking fields above
* Look at the OPAC and staff interface detail views
* Verify the content of your fields shows and the links combine a+t as a title search
* Apply patch
* Verify you have nicely formatted links now
Nick Clemens [Fri, 19 Apr 2024 12:29:31 +0000 (12:29 +0000)]
Bug 30318: Don't reset messaging preferences when form is empty
In testing, the messaging preferences are set in the form when EnhancedMessagingPreferences is enabled.
Switching categories silently updates the preferences unless you have made changes, in which case the
user is warned and can confirm if they want to reset or not. The code only applies to patron creatoin, and
does not seem to be taken into account during OPAC self-registration.
It seems the silent defaulting when saving can be removed in favor of the current updates/warns in the actual
form.
To test:
1 - Set some messaging preferences for at least two categories
2 - Enter a new patron
3 - Confirm switching categories correctly defaults the messaging preferences
4 - Edit the preferences and switch to another category with defaults
5 - Confirm the warning appears, and preferences are set if confirmed and ignored if not
6 - Set to a category with defaults, uncheck all, and save
7 - Ooof, patron is defaulted
8 - Apply patch
9 - Repeat 1-5 and confirm nothing has changed
10 - Set to a category with defaults, uncheck all, save
11 - Confirm patron is saved with no preferences
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 70fde44d4f6eef25e177012318e7acaa0ce740c3) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 86cc4b4d245f704a306ee10cc0ebde89cc40273a) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Pedro Amorim [Fri, 8 Mar 2024 11:49:26 +0000 (11:49 +0000)]
Bug 36282: Chomp whitespace around opac i18n strings
Same logic as bug 26816 but to OPAC
Test plan:
1) Apply test plan patch only
2) Visit opac home:
<opac_url>/cgi-bin/koha/opac-main.pl
3) Notice there's a space between 'Translated string' and ':', even though the markup does not contain a whitespace
4) Apply 2nd patch
5) Notice the white space is gone
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit b9f97ec015e4f101546e308754db4ed532987fde) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 5559ebc3bf8a6d3a3462e1367ce3901084cc7501) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 17 Apr 2024 09:48:16 +0000 (11:48 +0200)]
Bug 34963: Restore the ability to blank fields when editing a suggestion
Regression introduced by bug 23991.
We don't want to remove the fields from the edition if they are empty.
Ideally we should have separate parameters for edition and search, but
this is the low-effort fix, and hopefully won't introduce side-effects.
Test plan:
Try to edit a suggestion and blank some fields
Try to search for suggestions using the search form on the left of the
screen
Signed-off-by: Ray Delahunty <lib-systems@arts.ac.uk> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit cd1f4145fe091314895a4f8a4f73a5b3a5f8bb87) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit e6a2b1afde992359d0a0ad860701838438a9ebaf) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Thu, 21 Mar 2024 14:17:35 +0000 (14:17 +0000)]
Bug 36386: Pass user and group to Net::Server
This prevents the User/Group Not Defined warns in syslog.
Test plan:
Restart sip and check your syslog.
KTD Test Plan:
1) Stop your SIP server
2) Run "perl C4/SIP/SIPServer.pm /etc/koha/sites/kohadev/koha-conf.xml"
We need valid XML without any valid SIP settings to the output goes
to the command line
3) Note the warnings
4) Apply this patch
5) Repeat step 2
6) No warnings!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 2973a4e81a2878b8d2654477b2556ad1b1fb4e46) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 89ce196ea77e0e46d6d66b1710325673b753bbd3) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 36420: Allow Basic authentication using `cardnumber`
This patch makes the API Basic authentication work with cardnumbers.
The used `checkpw_internal` method already does the fallback check.
To test:
1. Apply the unit tests patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/api/v1/auth_basic.t
=> FAIL: Tests explode! [1]
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
[1] This highlights an underlying bug! Instead of getting 403, etc we get a 500. This is because of the internal fallback mechanism allowing the cardnumber+password combination, but then the Koha::Patron->find... not finding :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 154a2ea9ad5b6e911a504b8798f5ffe6df1c2297) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit dd58ce2a036e9b762f3e5418b7b670532de5dd05) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5c3ad38157f483aeb4ff26048a838b3ba6ad34fc) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit fa768d5ed4a1b273d049679017c2ef0c4c7bdc20) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Mon, 26 Feb 2024 15:59:29 +0000 (15:59 +0000)]
Bug 30987: Fix relationship fields for patron full and quick add forms
To test:
1. APPLY PATACH and restart services.
2. Find the borrowerRelationship system preference. The description should no longer include the words "Leave empty to deactivate."
3. Populate the system preference with at least 1 choice.
4. Find a patron category with can_be_guarantee set to 'Yes'.
5. Quick add a patron of that type, making sure the relationship field shows in the Patron guarantor section. ( You have to +Add gaurantor before this field will show )
6. The values in the dropdown should refelct the borrowerRelationship values.
7. With BorrowerMandatoryField make relationship mandatory.
8. Try step 5 again, this time the Relationship field should be mandatory.
9. Remove the field from BorrowerMandatoryField and add it to BorrowerUnwantedField.
10. Do step 5 again, the relationship field should not show on the quick add form.
Signed-off-by: Myka Kennedy Stephens <mkstephens@fosgail.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit fccbd327d9f93925917e7a4f478ab72c1d1f2363) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 7083a9dfbeff7a69a681e275a83c97239654b764) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 28268, in
Koha::MetadataRecord::Authority::get_all_authorities_iterator,
introduced a warning:
warn "Something went wrong reading record for authority $row->authid: $@\n";
But a method cannot be called from within quotes in Perl - extrapolation
does not work for functions/methods. So, if something really goes
wrong, this line of code produces a warning like:
Something went wrong reading record for authority
Koha::Schema::Result::AuthHeader=HASH(0x55cf7e0d0958)->authid: Empty
String at /usr/share/perl5/MARC/File/XML.pm line 450.
which is not very informative -- authid is missing.
Test plan
=========
Hard to reproduce. This problem occurs only in rare cases of some weird problem
in stores authority data or if a auth record had been deleted after a ES reindex
action has been initiated. But the problem in the code and the fix seem obvious.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 9c2510ea2ef1db46bf42cf948b6c599250d6dd9e) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit fb3473dfe3abe71b9545f19035d47e84f59c69d6) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Janusz Kaczmarek [Wed, 26 Apr 2023 23:04:48 +0000 (01:04 +0200)]
Bug 36552: Update record 'date entered on file' when duplicating a record
The 'date entered on file' (MARC21: 008/0-5, UNIMARC: 100a/0=7) of a record created
by duplication of an existing record should be set to the current date instead of
having the value of the original record.
Test plan
=========
1. Check the 'date entered on file' of an existing biblio / authotiry record
(MARC21: 008/0-5, UNIMARC: 100a/0=7).
2. Duplicate the record by Edit > Edit as new (duplicate)
3. Control the 'date entered on file' value - it will equal to that of the
original record.
4. Apply the patch (restart plack).
5. Repeat step 2.
6. Check the date - it should be the current date.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit dd8f9e1266f2b93b0d57f1f1289d49f61129391e) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 0cd9d2f1842a93beb4dfb5cba26c64602bdf2d68) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle M Hall [Fri, 25 Aug 2023 17:37:46 +0000 (17:37 +0000)]
Bug 34621: implement Patron import option to 'Renew existing patrons' 'from the current membership expiry date'
Test Plan:
1) Test importing a patron with the "from the current membership expiry date" option,
note it does not work
2) Apply this patch
3) Restart all the things!
4) Re-test, note the expiration was renewed from the patron's current
expiration date!
Signed-off-by: David Nind <david@davidnind.com> Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit b89d744e868cd93632d6b84f5f39116a475d342e) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 3a99bc8bb1cc95c7d1abcff3ffa7bccd72f68b1d) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Mon, 1 Apr 2024 14:32:08 +0000 (14:32 +0000)]
Bug 36473: Handle Invalid Metadata Exceptions in totalissues.pl
This patch wraps the call for record in an eval, and catches any invalid metadata
exceptions, letting the warning show, but allowing the script to continue
To test:
1 - In default KTD record 369 has problems, otherwise you need to break a record
2 - Run : misc/cronjobs/update_totalissues.pl --use-stats --commit=1000 -v
3 - It dies at record 369 (or the one you broke)
4 - Apply patch
5 - Run again
6 - It succeeds, but skips the bad record
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit f3d2f34d7a6aeead30b40a30b239f15c6c94a7f2) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit d397da65c02ee40243aacdc3382e68b84e040921) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 12 Jun 2019 11:43:48 +0000 (11:43 +0000)]
Bug 23102: 404 errors on page causes SCI user to be logged out
To test:
1 - Have something on the SCO page that won't load
Add to SCOUserJS:
</script>
<img src="http://localhost:8080/silk/famfamfam.png"/>
<script>
2 - Enable the SCO and SCI system preferences:
WebBasedSelfCheck: Enable
SelfCheckInModuke: Enable
AutoSelfCheckAllowed: Allow
AutoSelfCheckID / AutoSelfCheckPass to a valid user with permissions
3 - Add the self_checkin_module and self_checkout_module permissions to the AutoSelfCheck user
4 - Access the selfcheckout module https://yoursite.org/cgi-bin/koha/sco/sco-main.pl
5 - Sign in using a patron
6 - Enter an unkown barcode, I used "DONTMATTER"
7 - If not logged out, click to 'Return to account summary'
8 - You are asked to sign in again
9 - Repeat with the SCI module
10 - Apply patch
11 - Repeat, but this time you can return to account
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5bab87f76b05bbf8627cf6786975e9e30a5f2f6c) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 240f526d06a2070a492799bb9045d4965fcced4b) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Magnus Enger [Fri, 5 Apr 2024 13:41:08 +0000 (13:41 +0000)]
Bug 36517: Fix output from install_plugins.pl
When misc/devel/install_plugins.pl does not find any plugins, it prints
the list of pluginsdir, but with a literal \n separating the dirs, and
no newline at the end.
To test:
- Edit koha-conf.xml and add a second entry for <pluginsdir>, so there
are two entries. The second one could just be a copy of the original.
- Run "perl misc/devel/install_plugins.pl"
- Note the output looks something like this:
No plugins found
pluginsdir contains:
/var/lib/koha/kohadev/plugins\n/var/lib/koha/kohadev/pluginsroot@kohadevbox:koha(master)$
- Apply the patch and run the script again. Output should be:
No plugins found
pluginsdir contains:
/var/lib/koha/kohadev/plugins
/var/lib/koha/kohadev/plugins
root@kohadevbox:koha(master)$
- Sign off
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4848def5e2a336e01bf0dd0ff61a75a30b35f137) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit f2a05fadd06f40ad385ed8f7792ac7b68c16e7d7) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch makes the test independent from existing cash registers in
the system.
To test:
1. Enable UseCashRegisters on a fresh KTD
2. Add a cash register
3. Run:
$ ktd --shell
k$ prove t/db_dependent/api/v1/cashups.t
=> FAIL: Tests fail!
4. Apply this patch
5. Repeat 3
=> SUCCESS: Tests pass!
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4436a7d41a74bf002fdd80ec97f0be38d40eee22) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 19b543a51b59c7a13e5a901c2c31413eee2f2692) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Phil Ringnalda [Fri, 5 Apr 2024 01:59:34 +0000 (18:59 -0700)]
Bug 36531: Serve text/javascript compressed, like application/javascript is
Koha serves static .js files as application/javascript (if /etc/mime.types
says to) and serves them compressed, but output_with_http_headers uses the
currently-correct text/javascript mimetype, and Koha doesn't compress that.
Test plan:
1. Set the preference EnableAdvancedCatalogingEditor to Enable.
2. Open the browser Web Developer Tools to the Network tab
3. Load Cataloging - Advanced editor
4. Click on the line for the framework?frameworkcode=&callback=define load
5. Note the content-type text/javascript, no Content-Encoding line, and
the size of 1.9MB
6. Apply the patches from bug 36463 if they haven't been pushed, then this
patch, and reset_all
7. Repeat steps 1-4, and note a Content-Encoding: gzip header and a
Transferred size around 160KB
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c52af2cef0d79f20d74ebf170d4d5514b139ea65) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 3e0c3032b6f397f2b83073a6d274cdcfd370415e) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 29 Mar 2024 12:54:30 +0000 (12:54 +0000)]
Bug 36463: Compress application/json
This patch simply adds application/json to the mod_deflate configuration
To test:
1 - Open the netowrk tab in firefox
2 - Load http://localhost:8081/api/v1/libraries
3 - Not the transferred size, and note no 'Content-Encoding: gzip" header
4 - Apply patch, reset_all (or edit /etc/koha/apache-shared.conf)
5 - Reload
6 - Note smaller size, note gzip header
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit bccf7764c0e3eea22713edb7d76f90c8d8bf8c2b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit d8afbbf6615d56ac13a45e3ce658623d159c5a68) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Laura Escamilla [Mon, 18 Mar 2024 19:42:01 +0000 (19:42 +0000)]
Bug 36353: Update relationship value so that it is blank and consistent with other forms
To Test:
1. Choose a User Eligible for a Guarantor:
1. Modify the user profile to include a new guarantor.
2. Upon selecting a guarantor, ensure that the empty option in the 'Relationship' dropdown appears as a blank box.
2. Select a User Eligible for a Guarantee:
1. Navigate to "Add Guarantee" in the top menu.
2. Verify that the guarantor field is automatically populated with the selected user.
3. Confirm that the 'Relationship' dropdown displays the empty option as 'Empty record.'
3. Apply Patch and Refresh the Page for Step 2:
1. After applying the patch, refresh the page for step 2.
2. Ensure that the empty option value for 'Relationship' is now displayed as blank.
4. Sign Off and Have a Great Day! 😊🎉#
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 9de44f00f7744b1ad09ffc0d619344872f81305b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 75c3ff228e3f5145caec125fcf5a114396e3aaca) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Pedro Amorim [Wed, 21 Feb 2024 13:03:13 +0000 (13:03 +0000)]
Bug 36142: recallsview template param for opac-recall.tt
Test plan:
1) Enable UseRecalls
2) Visit OPAC confirm recall page:
<opac_url>/cgi-bin/koha/opac-recall.pl?biblionumber=76
3) Notice left-side menu 'Recalls history' is not active
4) Apply patch. Repeat.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 44d2303ef7397e352c889ce2405b4d01e9f11fbe) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 3f731be49000f71ef020c21f02663d12153c62d2) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Philip Orr [Thu, 28 Mar 2024 10:34:32 +0000 (10:34 +0000)]
Bug 36452: correct display of patron message
To test:
1. Before applying the patch:
2. In the staff interface, navigate to a patron
3. Add a new staff message that contains multiple lines (e.g. using
enter for the next line)
4. Save the message and check the display.
It will be a single line.
5. Apply the patch and navigate back to the
patron
6. The message should now be displayed as multiple lines.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5e8059a6f83493149ecefc03b9a47c42288a26ee) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 54bb9ffe16aba5fb91aa743f7e2f5b8d176a78dc) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Andreas Roussos [Fri, 29 Mar 2024 06:59:41 +0000 (07:59 +0100)]
Bug 36462: remove extra Home breadcrumb item
In the Staff interface, when viewing (or editing) the authority MARC
subfield structure for a particular field, the Home button breadcrumb
on the top left of the screen appears twice.
This patch fixes that.
Test plan:
1) Try to view (or edit) the authority MARC subfield structure for
a particular field. Notice the 'Home' breadcrumb button/icon is
appearing twice.
2) Apply this patch.
3) Refresh the page, the 'Home' breadcrumb icon should now appear
only once.
Signed-off-by: Esther <esther@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit f7df7819cd4f9135c1eb4e389eee1ef2a144e2b2) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 6f7d4ca168e5dd2bad6f4c994ca1c07b59332c86) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Thu, 4 Apr 2024 09:13:04 +0000 (11:13 +0200)]
Bug 36516: Fix useless warning from translation script
I lost too much time trying to know what the translation script outputs
sh: 1: Syntax error: end of file unexpected
To recreate:
touch 'koha-tmpl/intranet-tmpl/prog/en/modules/<' (yes, don't ask!)
koha-translate -i de-DE --dev kohadev
or
koha-translate -u de-DE --dev kohadev
And you get the shell error without any ideas what's happening!
With this patch applied you will not get any errors because the quote
will actually copy the file (what is expected).
But without the quote the cp command will fail and the explanation will be
displayed
sh: 1: Syntax error: end of file unexpected
Cannot copy /kohadevbox/koha/koha-tmpl/intranet-tmpl/prog/en/modules/< to /kohadevbox/koha/koha-tmpl/intranet-tmpl/prog/de-DE/modules/< at /kohadevbox/koha/misc/translator/tmpl_process3.pl line 385.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 0026ee3e971b6556f2fdd97f6173d12337bb7c0f) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 2001b853f4028c807bf986cdd42c687961f9c67a) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This $sth2 is never fetched, we are retrieving the AV cat using
Koha::AV::Categories
Sponsored-by: The Research University in the Helmholtz Association (KIT) Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4158783eb284cf5f89266d3251f6d647200c0f01) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit a2ea0291e7ca79e52e359da28ff6a9c9ab5b1445) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Thu, 21 Mar 2024 14:08:38 +0000 (15:08 +0100)]
Bug 35868: Warning sign for using a patron category that is limited to another library has moved to other side of page
Bug 31422 implemented a warning sign, when a patron has a patron category that you are not allowed to set due to library limitations on the code.
It should appear right next to the field, but might appear on the other side of the page now being easily missed.
This patch simply removes the float:right CSS rule.
To test:
* User's login branch and home library is: Centerville
* Patron category "B - Board" is limited to Franklin
* Create a new patron: Board doesn't show
* Edit an existing patron with another patron category: Board doesn't show
* Edit a patron with Board category from Centerville
=> Check the warning icon with the tooltip is close to the category select
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 7356a5cbd48cdb3a7971608f59131152d296a447) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 3ba6bb9cdfef55d7e0d416acb4ad953c805756cc) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
David Cook [Fri, 11 Dec 2020 04:42:39 +0000 (04:42 +0000)]
Bug 27198: Fix syntax in marc21-retrieval-info-auth-dom.xml
This patch fixes the syntax in marc21-retrieval-info-auth-dom.xml,
so that one can use the Zebra special retrieval elements documented
at https://software.indexdata.com/zebra/doc/special-retrieval.html
These are very useful when troubleshooting issues with authority
records in Zebra.
Test plan (using KTD):
1. yaz-client unix:/var/run/koha/kohadev/authoritysocket
2. Enter these commands:
. base authorities
. format xml
. elements zebra::snippet
. find e
. show 1
3. Result = diagnostic message:
Diagnostic message(s) from database:
[25] Specified element set name not valid for specified database
-- v2 addinfo 'zebra::snippet'
4. Apply the patch
5. Copy updated file: sudo cp debian/templates/marc21-retrieval-info-auth-dom.xml
/etc/koha/marc21-retrieval-info-auth-dom.xml
6. Stop and restart zebra (no need to rebuild the Zebra index):
. sudo koha-zebra --stop kohadev
. sudo pkill zebrasrv
. sudo koha-zebra --start kohadev
7. Repeat commands in step 2.
8. Result from show 1 = XML output:
Sent presentRequest (1+1).
Records: 1
Record type: XML
<record xmlns="http://www.indexdata.com/zebra/">
<snippet name="Any" type="w">Gontarski, S. <s>E</s></snippet>
</record>nextResultSetPosition = 2
Elapsed: 0.013929
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 10d5f6ef379768663cd6b26a81315ce44b65520d) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit f129c009a40f9af4f4d9d984058e99829bc21a0d) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Mon, 25 Mar 2024 14:53:10 +0000 (15:53 +0100)]
Bug 35599: Fix Pronouns and HidePersonalPatronDetailOnCirculation
Bug 10950 adds a pronouns text field to the patron record.
Currently it is hidden by system preference 'HidePersonalPatronDetailOnCirculation'.
This patch moves pronouns outside this system preference influence.
Test plan:
1) Add pronouns to a patron
2) Set system preference 'HidePersonalPatronDetailOnCirculation' to "Don't hide"
3) Check you see pronouns in circulation page
/cgi-bin/koha/circ/circulation.pl?borrowernumber=X
4) Set system preference 'HidePersonalPatronDetailOnCirculation' to "Hide"
5) Refresh circulation page
=> Without patch pronouns are hidden
=> With patch pronouns are displayed
Signed-off-by: Hebah <hebah@bywatersolutions.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 07738adbf08a66fdb91728dedc1362a8a75a3067) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit a728c6582828ca458edf647c017e26fe020cb827) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Thu, 25 Jan 2024 21:54:21 +0000 (21:54 +0000)]
Bug 23296: Set patron branchcode when preparing non-digest version
To test:
1. APPLY PATCH
2. Set up circ rules to allow for auto renewals.
3. Set AutoRenewalNotices to 'according to message prefs'
4. Make a branch specific version of the the AUTO_RENEWAL notice.
5. Find a patron belonging to that branch and set the message prefs to allow for a AUTO_RENEWAL. But no digest option!
6. Check some things out and make sure they are eligble for auto renewal.
7. Run the cron.
8. Make sure the patron gets the branch specific notice.
9. Delete the branch specific notice.
10. DO 6-7 again.
11. Make sure they now get the all library notice.
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Tidied one line. Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit ade75ea56158e6cf87894d0aeba1711e73dbfcda) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 8607c04099b2296046236de15a246d7999157f1b) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Julian Maurice [Wed, 7 Sep 2022 09:24:49 +0000 (11:24 +0200)]
Bug 35573: Correctly display warning when placing a hold
Test plan:
1) Add a basic circulation rule like : 0 hold allowed on patron category
'A' and set AllowHoldPolicyOverride to 'Allow'
2) Make a hold on a patron belongs to this category
3) Normally you should see a warning on item (override needed) but it's
not the case
4) Apply this patch
5) Refresh and repeat step 2
This patch comes from an alternative patch on the original bug (I'm including
the original test plan for your information) :
(Bug 30687 - alternative patch): Always allow to force hold pickup location
If AllowHoldPolicyOverride is enabled and only some pickup locations are
available, you still have the possibility to force one of the others
pickup locations.
But when there are zero pickup locations available, that is not
possible.
This patch change that by always displaying the list of pickup locations
when AllowHoldPolicyOverride is enabled.
Test plan:
1. Apply patch
2. Disable AllowHoldPolicyOverride
3. Create a biblio B with an item I at library A.
4. Configure this library A to not be a pickup location
5. Add a "Default holds policy by item type" for item I type where "Hold
pickup library match" is "item's home library"
6. Try to place a hold on biblio B
You should not be able to place a hold because there is no valid
pickup locations
7. Enable AllowHoldPolicyOverride
8. Try to place a hold on biblio B
You should now see all valid pickup locations in a dropdown list
(with an exclamation mark in front of each option) with none selected
by default
9. Verify you can place a title-level hold and an item-level hold
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 805ea1a00e5e05aae71c508947976b0cfff5b81a) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 204b5c76ce3c8ee29b6bd6882c0852fa31fe71d4) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 33da81f9feb145e357647d456ae3bad0644f6963) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit aa149ff575e43c2662d21268d7119906a3e2a938) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Thomas Klausner [Thu, 7 Mar 2024 16:56:13 +0000 (17:56 +0100)]
Bug 36269: Elasticsearch: publisher-location (pl) should use260a/264a
Currently the index `pl` points to 008/15-17. It should
(additionally/instead?) point to 260a and/or 264a.
Test plan (for koha-testing-docker with ElasticSearch via `ktd --es7 up`)
Verify the old/broken behaviour:
* Go to Staff/Advanced Search
* Select "Publisher Location" and enter "cau", start search
* You will get some hits (~16), eg "Perl best practices / Damian Conway", which has 008 of "051222s2005 caua b 001 0 eng d" with "cau" on 15-17
* Edit this record (cgi-bin/koha/cataloguing/addbiblio.pl?biblionumber=5)
* Inspect 260$a, which should containt "Sebastopol, CA :"
* Go back to Advanced Search and search for "Publisher Location" = "Sebastopol"
* No hits!
Apply the patch!
* exit ktd and stop it (ktd --es7 down; ktd --es7 stop)
* start it again
* Go to Staff / Administration / Search Engine Config (Elasticsearch)
* Click on the Tab "Bibliographic records" and search/filter for "pl"
* you should see 3 entries for "pl", with Mapping values of "008_/15-17", "260a" and "264a"
* Go to Search,
* Select "Publisher Location" and enter "cau", start search
* same hits as befor
* Search again, but for "Sebastopol"
* Now you'll get 9 hits!!
Bonus: Test 264a
* Got to Admin / MARC bibl framework, select BKS -> MARC structure
* search for tag "264", edit subfields
* in tabs a, b, c: Check the "Editor" Checkbox (Visibility)
* Save changes
* find a book, eg again "Perl best practices" and edit it
* find field 264 and enter "Test" into 264a, Save
* Depending on your setup, you might have to manually re-index the book:
* enter ktd: ktd --shell
* reindex the one book (via --bn) or all (might also need a -d)
/usr/share/koha/bin/search_tools/rebuild_elasticsearch.pl -v -b -d
* Go again to Advanced Search, Publisher Location = "Test"
* You should find the book
If your NOT running ktd, you might be able to just edit the ElasticSearch Mappings to add / change the mapping for "pl" to point to "260a".
One rather harsh way to do this (which I needed to do, because the ES Mappings UI did not work for me) is via this SQL:
update search_marc_map set marc_field='260a' where marc_field='008_/15-17';
Sponsored-by: Steiermärkische Landesbibliothek Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit df9bc0b86a83d60b7b71924c46087bed7aa4226b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 342c65a680fffe6fb6a5b9b4d8539a5947686168) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds a safe guard for when consumers pass _per_page=0 to
endpoints. This condition is checked for on a centralized place and
avoid reaching the controller in such scenarios that would provoke a
division by zero exception.
To test:
1. Apply the regression tests patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/api/v1/pagination.t
=> FAIL: We expect a 400, but get a 500 instead
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass! No more explosions for this!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 308bb0830cfe69116e442bad4cd206dd402244be) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit b1e9ef93f2181cc63537be6d09027491885dc303) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 9a4e3bd49f1a978fbe5d3dc88e36dc5de0fb81f9) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 9e8657aba7d7f742e2cc2bdf98a55252c021890e) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
It appears this bug introduces the first actual use of this function in
the OPAC and thus exposes that bug 31261 didn't fully port the
Date_from_syspref from the intranet.
Martin Renvoize [Mon, 18 Mar 2024 11:35:13 +0000 (11:35 +0000)]
Bug 36341: Add futureinclusive to future holds
This patch adds the flatpickr-futureinclusive data to the input field
for "Hold starts on date" in the OPAC.
We also add 'flatpickr-future' data to the input field for expiration
date as it also doesn't make sense to allow this to be a past data
either.
Test plan
1) Attempt to place a hold on an item from the OPAC
2) Expand the 'Show more options' dropdown
3) Note that without the patch 'Hold not needed after' allows setting to
a date in the past.
4) Enable `AllowHoldDateInFuture` and `OPACAllowHoldDateInFuture` system
preferences
5) The 'Hold starts on date' option should now appear if you refresh
your hold placing page in the OPAC.
6) Note that the above input also allows setting a past date
7) Apply patch
8) Neith input should allow past dates now.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c16ec21f4b77971b19e5c4b5140521c4133f0608) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit e3bfca4f02b72e00909272fbfb5fc24abbab49a7) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Julian Maurice [Tue, 26 Mar 2024 15:19:41 +0000 (16:19 +0100)]
Bug 36432: Remove circular dependency from Koha::Object
Koha::Object depends on Koha::DateUtils, which depends on C4::Context,
which depends on Koha::Config::SysPref, which depends on... Koha::Object
Apart from the circular dependency, the dependency on C4::Context alone
is problematic as it loads a bunch of modules that are not needed at all
in Koha::Object (YAML::XS and ZOOM for instance).
As Koha::Object is used as a base for a lot of modules, we should take
care to only load the minimum required.
This patch moves some date parsing code to specific modules:
- Koha::DateTime::Format::RFC3339
- Koha::DateTime::Format::SQL
and it uses them in Koha::Object and Koha::DateUtils where it is
possible.
Test plan:
1. Do not apply the patch yet and run the following command:
`perl -cw Koha/Object.pm`
It should print several warnings about redefined subroutines, meaning
there is a circular dependency.
2. Apply the patch
3. Run `perl -cw Koha/Object.pm`. It should only say:
"Koha/Object.pm syntax OK"
4. Run the following command:
prove \
t/DateUtils.t \
t/Koha/DateTime/Format/RFC3339.t \
t/db_dependent/Koha/Object.t
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8d5299639e3f983e95fcf2a9d81febc1406bafdd) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit b0c862533d74505c8f4fa8760d809942973ea57c) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Wed, 20 Mar 2024 17:29:02 +0000 (18:29 +0100)]
Bug 36376: Display library limitations alert in patron's messages
Bug 31422 added a warning message when library limitations issue in patron edition page.
We should add this patron's messages in circ and details pages.
Like age limitations.
Test plan:
1) User's login branch and home library is: Centerville
2) Patron category "B - Board" is limited to Franklin
3) Edit a patron with Board category from Centerville
4) A message appears "The patron's current category (Board) is limited to other libraries."
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 841dc00ec89dd35cef09890c2f0101f014cc7f92) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit ebd8a50e6e48b2e31730fb961dba15f8a0491a7e)
Phil Ringnalda [Thu, 28 Mar 2024 22:02:38 +0000 (15:02 -0700)]
Bug 36461: Advanced editor should disable RequireJS timeout with waitSeconds: 0
We aren't actually doing any error handling with the RequireJS waitSeconds
config, just leaving the advanced editor hanging on loading if it times out,
so instead we should disable it.
Test plan:
1. Set the preference EnableAdvancedCatalogingEditor to Enable
2. Load the Cataloging module home page in Firefox and open Firefox's
Web Developer Tools, and in the Network tab change from "No Throttling"
to "Regular 2G"
3. In the Cataloging page, click Advanced editor, and watch it attempt to
load for 30 seconds, followed by a setTimout error in the devtools console,
and then wait as long as you can stand for anything but the "Loading,
please wait..." to happen in the web page. Nothing ever will.
4. Apply the patch, restart, set EnableAdvancedCatalogingEditor back to
Enable, turn throttling on, load the Advanced editor again, and note that
even though it will take a minute or more to load through the throttling,
the editor does actually load.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 95394217f081a38c3fe66f21d673aa056c83414b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit c305b468218bee1ece2e396762d2360ed628d71c) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 36421: Make sure pre-controller errors are correctly logged
If something explodes in Koha::REST::V1::Auth chances are that no logging will happen.
This patch makes sure they are!
To test:
1. Make sure you do NOT have 36420 on your tree
2. Make sure you are looking at the logs:
$ ktd --shell
k$ koha-plack --restart kohadev; tail -f /var/log/koha/kohadev/*.log
3. Use Postman or similar for hitting some known endpoint. Use
the user's cardnumber instead of the userid. On a default KTD launch, the
generated user's cardnumber is '42'.
GET /patrons
=> FAIL: You get a 500 error (expected, fixed on 36420) but no useful logging found.
4. Apply this patch
5. Ctrl+c on the logs and re-run the command
6. Repeat 3
=> SUCCESS: You get a 500, but you also get the exception information logged!
7. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[OK] prove t/db_dependent/api/v1/items.t t/db_dependent/api/v1/unhandled_exceptions.t Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e518e0be2c97782997037383223e57ce2e196df4) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 0705360fc8dd81f1c09e92859a200bb28c10c643) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Wed, 6 Mar 2024 00:02:31 +0000 (00:02 +0000)]
Bug 36227: Add warning when item group has no holdable items
To test:
1. Enable EnableItemGroups and EnableItemGroupHolds
2. Find a bib and add an item group but do not attach any items to the item group.
3. Place a hold from the staff interface.
4. Under Hold next available item from an item group you see the option for your item group, select it and place the hold.
5. It's a hold that can not be filled
6. APPLY PATCH
7. How on the hold page under Hold next available item from an item group there is a 3rd column called 'Holdable items'.
8. Your item group, without any items, should have a disabled radio button and a warning "No holdable items in this item group."
9. Add items to your item group.
10. Now on the hold page in the new 'Holdable items' you should see links for each item, make sure those links work.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 29873200dfdb0ca0956095674dab440e1ff36d0d) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit e3318be45811fa8914c4dcc15e4b9cfdc92dc950) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When the user clicks on a hidden tab, 'shown.bs.tab' is triggered and
then another click event is triggered. And because the table was loaded
on tab click, it was loaded twice.
Visually it could have caused the rows to be duplicated (it was random,
probably due to timing, network latency, ...)
I don't know why we need to trigger a click in this case, but removing
this will probably break something else, so the fix here is to load the
table on 'shown.bs.tab' event instead of 'click'
This patch also contains a small fix in refreshReturnClaimsTable which
was reloading the table right after the table initialization.
Test plan:
1. Check out an item, and in the checkouts table, click "Claim returned"
2. Open the network tab of your browser's developer tools
3. Click on the "Claims" tab, verify that only one call is made to
svc/return_claims
4. Verify that the claims table is displayed correctly
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5783d01af00a5bf21527c81a05252d99a2a14e9a) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 4183ec10c0ecab8f9c6d0bf1f2360cef3be30ff7) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
We needed to call getAll instead of get to fetch all the vendors
Test plan:
Have more than 20 vendors and create/edit an agreement.
Notice that the vendor list contains all the vendors
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Matthias Le Gac <matthias.le-gac@inlibro.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 17b134fcb982768541b66f327ba301e06a727337) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit f353bd8d969800c0320b13510fce27d0583d9fab) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch corrects the default UNIMARC bibliographic framework to
place all the 4XX subfields in tab 4.
To test:
1. Go to Administration > MARC Bibliographic framework test
--> There should be errors indicating subfields from 4XX fields
are in tabs 3 and 4
2. Apply patch and reset_all
3. Redo step 1
--> It should now say that all subfields for each tag are in the
same tab (or ignored)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 49a7950f38729c54196fbb839a170ce1f958ae6d) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 676d285a20274d82400fb6a988acf2051c4ff1f9) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Brendan Lawlor [Fri, 22 Mar 2024 17:25:20 +0000 (17:25 +0000)]
Bug 36371: Check if patron attribute is defined in circ-menu.inc
This patch changes the conditional that determines if a patron attribute is displayed in the patron brief info. Instead of checking the value of the attribute we should check if the attribute is defined.
To test:
1. Create a patron attribute, eg. party_mode, check 'display in patron's brief info' and tie to the YES_NO authorised value.
2. Find a patron and set your attribute to Yes
3. Confirm you see the attribute and its value both in the "Additional attributes and identifiers" section of the patron detail page and in the patron brief info area
4. Set your attribute to No
5. Confirm you see the attribute and its value in "Additional attributes and identifiers" but it no longer shows in the brief info
6. Apply patch and restart_all
7. Notice that your attribute now displays in the brief info, such as Party mode: No
8. Set the attribute to the first empty option
9. Check the patron record brief info to confirm that the attribute does not display when the value is empty.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 93d3b0b0f75e1d7377ea31c72118ea1376f67b96) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 7be415b656b5cbc29fda66ed6336b9d853ffebb8) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 30554: Use XSLT (if enabled) in authority search cataloguing plugin
Test plan:
1. Set AuthorityXSLTResultsDisplay to a valid XSL file (see bug 30554
attachments, there is an example XSL file)
2. Go to the bibliographic record editor (edit an existing one or create
a new one)
3. Find a field linked to authorities and open the plugin
4. Start a search and verify that the results are displayed using the
XSLT output (if using the example file it should be a link saying
"Authority #<authid>")
Sponsored-by: Écoles nationales supérieure d'architecture (ENSA) Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 01e2a6d983c272120ec0579536e23eed2b046a62) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit b63d96612bc391dde655cda8dd7c533501a65f18) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 20 Dec 2023 19:06:57 +0000 (19:06 +0000)]
Bug 35621: Map ÿ to y for searching (Non-ICU)
To test:
1 - Find or add a record with title: Chevilly-Larue, L'Haÿ-les-Roses, Fresnes, Rungis [par] Sté éditions et de publicité L.F.B.
2 - Search for 'L'Hay-les-Roses'
3 - No results
4 - Apply patch, copy the file:
sudo cp /kohadevbox/koha/etc/zebradb/etc/word-phrase-utf.chr /etc/koha/zebradb/etc/word-phrase-utf.chr
5 - Restart all, Reindex
restart_all
sudo koha-rebuild-zebra -v -f kohadev
6 - Search again
7 - Success!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 1412f6c65b011ef79f955f75c812e3f7f1a9fce0) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 35c3ff27b73acb13695cffb50080512781c31415) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Laura Escamilla [Tue, 5 Dec 2023 14:57:58 +0000 (14:57 +0000)]
Bug 35034: Add parameter that links titles to their records
To recreate:
1. Select two items from the catalog and begin a merge.
2. Notice that the title of the items, their biblionumber and a
hyperlink to their MARC record is available.
3. Apply the patch and refresh the page. The biblionumber for each title
is now hyperlinked and leads to the item’s bib records.
4. Sign off and have a great day :)
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit fcbb5fceb8d759eecfbc13b88397c205f3a66eb3) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit d7bed4435bfad0fcabb5fac4ef377f383ad61eb5) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Katrin Fischer [Sun, 10 Dec 2023 15:45:28 +0000 (15:45 +0000)]
Bug 35531: Add context for translating gender option "Other"
To test:
* Apply patch
* Verify the option "Other" for gender is correctly displayed when:
* Editing a patron record in the staff interface
* Viewing the 'Details' tab of a patron in staff interface
* Triggering a "duplicate" patron warning and looking at the details
of the existing patron record
* Self registering a patron in the OPAC
* Viewing 'Personal details' tab in the OPAC for a registered patron
* If you are using ktd, run: gulp po:update --lang de-DE
* Verify string "gender" appears with the occurences of "Other"and
"Other:" in
misc/translator/Koha-messages.pot
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5f6c0f0c3e896f72c086bfacec1501ee3d72fbe0) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit c80f0882bdb097cf74a8e6d20274949506d79e3c) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Julian Maurice [Tue, 30 Jan 2024 14:13:47 +0000 (15:13 +0100)]
Bug 35943: Fix group/subgroup filtering of saved reports
Use code instead of name for filtering and escape regexp special
characters.
This patch also disables datatables' smart filtering as it is not
recommended to use with regexp filtering
https://datatables.net/reference/api/search()
Test plan:
1. Create a report in a group named "Foo + Bar" and in a subgroup named
"Baz + Quux"
2. Create other reports in group "Foo + Bar" but in other subgroups, as
well as in other groups. This is useful to see the effect of
filtering
3. Go to the saved reports page and verify that navigating between tabs
have the desired result. Same for the subgroup select
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit de91b2e5d9dbff8c43a5090828397583bd397dc1) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit de13938d0af05445d32a8989d2eb7efe939b4658) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Aleisha Amohia [Fri, 5 Mar 2021 01:05:09 +0000 (14:05 +1300)]
Bug 35768: Show 'Used in' records link for results in cataloguing authority plugin search
To test:
1. Edit a biblio record
2. Go to the 100 tab and click the plugin launcher icon for an author
tag i.e. next to 100$a
3. Search for an authority and observe the results
4. Notice that the number of times this authority has been "Used" in a
record is now a link, and clicking it does a search showing those
records.
Sponsored-by: Education Services Australia SCIS Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 553126e5a3fc59c988185a26562ab02fc2c84619) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 60e2c5d5f6a5fb7f8ae1182abff4cd1b70c1b878) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
So index is need on pseudonymized_transactions columns :
itemnumber => For join with table items
transaction_type => For filter on type issue, return ...
datetime => For filter on date, this will help cleanup script
Test plan :
1) Run updatedatabase.pl
2) Check indexes are created in table pseudonymized_transactions
3) Run SQL query :
describe select * from pseudonymized_transactions join items using(itemnumber)
where transaction_type='issue' and datetime < date_sub(curdate(), INTERVAL 30 DAY)
=> You see the 3 new indexes used in 'possible_keys'.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 0573d01eaa2da7e0b53fd24054e5a3d4e0c2b056) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 6ba45bc290685a517e8bc1967910b6744162499f) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Thu, 14 Mar 2024 15:37:21 +0000 (16:37 +0100)]
Bug 36321: Problem when dateexpiry in BorrowerUnwantedField
hen dateexpiry is in BorrowerUnwantedField it is hidden in patron edition form.
The problem is when editing an existing patron the value is re-computed with category settings, as if it where empty.
This comes from all fields in BorrowerUnwantedField beeing removed from %newdata in memberentry.pl.
Whe must skip dateexpiry.
Test plan :
1) Be sure dateexpiry is not in BorrowerUnwantedField
2) Define a patron category with enrollment period 12 month
3) Create a new patron in this category
4) Its expiration date is in now + 12 month
5) Edit the patron category to set enrollment period 6 month
6) Add dateexpiry in BorrowerUnwantedField
7) Edit the patron and save
=> Without patch the expiration date is changed to now + 6 month
=> With patch the exporation date is unchanged
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Perl-tidied.
Lucas Gass [Mon, 29 Apr 2024 15:18:26 +0000 (15:18 +0000)]
Bug 36708: Fix column index for processing No automatic renewal after
To test:
1- Find or create a circulation rule with a 'Holds allowed (total)' limit of 3 (or another number) and no value in 'No automatic renewal after (hard limit)'
2- Select to edit the rule, and note that 'No automatic renewal after (hard limit)' box in the editing line is now populated with a date
3- Note also that 'Holds allowed (total)' is empty in your editing line
4- If you save your edits without clearing the new 'No automatic renewal after (hard limit)' date, it will save as part of the rule. Also, 'Holds allowed (total)' will save as Unlimited unless you re-add your numerical value.
5- APPLY PATCH
6- Try again, the values should save corrected and not erroneously fill the No automatic renewal after (hard limit) column.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e3a04f73a22b46af1a68f221dcaa6db77017d76d) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Martin Renvoize [Tue, 16 Apr 2024 17:22:41 +0000 (18:22 +0100)]
Bug 36612: Add public_read_list to Koha::Ticket
Without the public_read_list to define which fields should be accessible
from the public endpoints we will always return a 500 from the API on
otherwise successfull additions of tickets via the OPAC.
Test plan
1) Enable OPACCatalogConcerns
2) Login to the OPAC and "Report a concern"
3) Note the error message in the UI "There was an error when submitting
your concern, please contact a librarian."
4) Confirm that the concern is actually created regardless
5) Apply the patch here and restart plack
6) Submit another 'Report a concern' and now note the success message
"Your concern was successfully submitted."
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 834fc10650779c71b6608ab01ef0e54bd9dd4746) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit d6cf0250a907def14c55f9582ee170b5fa47ee51) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Emily Lamancusa [Fri, 10 May 2024 18:01:59 +0000 (14:01 -0400)]
Bug 36832: (bug 36791 follow-up) Allow authid=0
To test:
1. Go to the Authorities module and do a Z39.50 search that will return
results (e.g. a general subject heading)
2. Import an authority record from the results
--> Confirm that the record is imported into the editor
3. Authorities > New, replace it via Z39.50, confirm it's imported
4. Authorities > New, fill the required fields, confirm it saves
5. Edit an existing authority, replace it via Z39.50, confirm it saves
6. Edit an existing authority, replace authid=nn in the URL with a
number that doesn't exist like 1000000, confirm you get a 404 page
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Janusz Kaczmarek <januszop@gmail.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 1aba01adb4ff61c6af77af6b42f13d29d55df4f2) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit aa7bea04c43080e33843b0454140c674d5fef6a2) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 36791: Koha explodes when trying to edit an authority rec. with an invalid authid
When trying to open the authority editor with authid=<invalid_authid>
(e.g. a deleted authid) Koha explodes with a message:
Can't call method "authtypecode" on an undefined value at
/kohadevbox/koha/authorities/authorities.pl line 556
This this because authtypecode method is called on the result of
->find without verifying that it was succesful.
Test plan:
==========
1. Try to edit an auth rec. giving as a authid (in URL) a non-existing
authid, e.g. in ktd, with standard ktd test data:
http://your_ktd:8081/cgi-bin/koha/authorities/authorities.pl?authid=100000
Koha should explode with the message:
Can't call method "authtypecode" on an undefined value at
/kohadevbox/koha/authorities/authorities.pl line 556
2. Apply the patch; restart_all.
3. Repeat p. 1. You should get the 404 error page.
Sponsored-by: Ignatianum University in Cracow Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 18843cabdb1697fda2eb2d9c3c7f96b58f277813) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit b9ba92c1537435ee9906f72770680c985083645a) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Emily Lamancusa [Tue, 19 Mar 2024 18:14:27 +0000 (14:14 -0400)]
Bug 34972: Remove GetOtherReserves
GetOtherReserves attempts to set the waiting/transit status for the next
hold on the list when applicable, but in practice it either leaves the
hold state unchanged, or sets the itemnumber without setting the found
status (erroneously converting bib-level holds to item-level holds).
The latter situation only occurs when the user has been prompted to
confirm, cancel, or revert the hold, and is able to ignore the prompt.
In those situations, the hold's state should not change.
GetOtherReserves does not need to change the hold state, and it does not
do so correctly. Besides that, it does not do much other than call
CheckReserves, and is only used in 3 places.
This patch removes GetOtherReserves, and refactors returns.pl and
C4::Reserves::ModReserveCancelAll to call CheckReserves directly instead.
To test:
1. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
2. Check in an item from that record to fill Patron A's hold
3. Set the hold's expiration date to yesterday by accessing the database
in the command line:
- In a ktd shell prompt, open the db client with koha-mysql kohadev
- UPDATE reserves
SET expirationdate = DATE_SUB(CURDATE(), INTERVAL 1 DAY)
WHERE borrowernumber = <Patron A's borrowernumber>
4. Go to Circulation > Holds Awaiting Pickup, and find the hold in the
"holds waiting past their expiration date" tab
5. Click the "Cancel hold" button in the Actions column next to the hold
(do not check in the book)
6. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
7. Cancel Patron B's hold
8. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
9. Check in an item to fill Patron A's hold
10. Repeat steps 3-5 to expire and cancel Patron A's hold
11. Return to the Holds tab of the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold, and there is no
"Revert transit status" button
12. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
13. Check in an item from that record to fill Patron A's hold
14. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
15. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
16. Click "Ignore" on the modal for Patron B's hold
17. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
18. Apply patch
19. Repeat steps 1-6
--> Note that Patron B's hold is still a bib-level/"next available" hold
20. Repeat steps 7-11
--> Note that Patron B's hold is still a bib-level/"next available" hold
21. Repeat steps 12-17
--> Note that Patron B's hold is still a bib-level/"next available" hold
Make sure correct behavior is unchanged:
22. Cancel Patron B's hold
23. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
24. Check in an item from that record to fill Patron A's hold
25. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
26. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
27. Click "Print slip, transfer, and confirm" on the modal for Patron B's hold
--> Confirm that the information on the slip is correct
--> Confirm that the hold is correctly put in transit
22. Set HoldsAutoFill and HoldsAutoFillPrintSlip to "Do"
23. Place a bib-level hold for the logged-in library
24. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
25. Place a bib-level hold for a different library
26. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly put in transit
27. Change the logged-in branch to match the hold pickup location
28. Check the item in
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
29. Repeat steps 22-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm that Patron B's hold is correctly put in transit
30. Cancel Patron B's hold
31. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
33. Repeat steps 24-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm Patron B's hold is correctly set to Waiting
To test:
1. Apply this patch only
2. prove t/db_dependent/Koha/Holds.t
--> Tests pass
3. Apply the other patch
4. prove t/db_dependent/Koha/Holds.test
--> Tests still pass
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit d71f5272021b54849e5854d3a7b8ecb1f30d9414) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit c4661a1660f2a72393fc75ba83bb7b223e42b078) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 3 Apr 2024 20:35:46 +0000 (20:35 +0000)]
Bug 36508: Refresh patron object when updating category
To test:
1 - Find a ptron, I sued #45 in KTD, note their category
2 - Update them from one category to another using finesunder:
perl misc/cronjobs/update_patrons_category.pl -f ST -t S --finesunder=5.00 --where "me.borrowernumber=45" -v -c
3 - Check their modification log (I told you to enabled BorrowersLog,
right?)
4 - See many fields reported changed
5 - Apply patch
6 - Repeat, but change the to and from options
perl misc/cronjobs/update_patrons_category.pl -f S -t ST --finesunder=5.00 --where "me.borrowernumber=45" -v -c
7 - Note only one column changed in the logs
8 - Ask for unit tests
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit cae2efd69d8ad63822914377733f9819889a0ec1) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 2ff0a6578311f029def133446c99a7c7576b8ae0) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
projects / koha.git / log