Marcel de Rooy [Tue, 14 Feb 2017 15:41:26 +0000 (16:41 +0100)]
Bug 18070: [Follow-up] What should DelAuthority return?
Script tools/batch_delete_records.pl only checks the return value of
DelAuthority. The return value depends on DBI rows, which is not always
reliable. It may return -1 when it 'does not know'.
Testing $@ in tools/batch_delete_records.pl should actually be enough.
The return value was discarded in C4/ImportBatch.pm. Removing an unused
variable.
Test plan:
[1] Pick an authority record with a few linked biblios.
Delete this authority record via tools/batch_delete_records.pl.
Check if the linked biblio records are cleaned up.
[2] Bonus: Make a typo in the SQL statement of DelAuthority. Check
if batch_delete_records shows you the error message.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Tue, 31 Jan 2017 12:01:58 +0000 (13:01 +0100)]
Bug 18070: Extend sub merge to remove fields for deleted authorities
In order to accomplish this, we need to add some additional checks in
the merge routine. The actual change to remove the field, is quite
small.
Furthermore, we need to add a merge call in DelAuthority and adjust
the merge cron job accordingly.
The change is well supported by additional tests, including a simulation
of postponed removal via cron, if dontmerge is enabled.
Note: Deleting an authority with linked biblios is tested on the next
patch.
Test plan:
[1] Run t/db_dependent/Authorities/Merge.t
[2] Delete an authority without linked biblios from the Authorities
module. If the indexer is not fast enough, wait a bit and refresh to
verify that the authority is gone on authorities-home.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Tue, 31 Jan 2017 10:46:21 +0000 (11:46 +0100)]
Bug 18070: Deleting an authority should update the linked biblio records
Adding a test where we delete an authority and prove that the linked
biblio still contains a reference to it.
Note: Currently, you can only delete a used authority from Tools,
batch record deletion. If you do, the biblio records will still
contain references to the deleted authority.
Test plan:
[1] Run t/db_dependent/Authorities/Merge.t
Last test should fail: not ok 1 - Field 609 should be gone too
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 15 Dec 2014 13:10:56 +0000 (14:10 +0100)]
Bug 18037: Hold notes template cleanup (from 15545)
From the second patch of bug 15545:
Removing some unused template code related to a former approach.
Adding some changes for future extension by bug 15545.
This patch was tested by Liz Rea when the routine IsHoldNoteRequired was
called by opac-reserve.pl. The only change here is that we do not yet
call this routine; so leaving her original signoff.
Test plan:
[1] Enable OPACHoldNotes.
[2] Place a hold on a serial record. No behavior change.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Emma Smith [Tue, 17 Jan 2017 03:23:18 +0000 (03:23 +0000)]
Bug 17840: adding classes to notes in checkouts
Test Plan
1) Add an internal and a public note to an item.
2) Check out the item.
3) Verify that both notes are shown in between title and barcode in the
second column of the details table.
4) Verify there is an empty class="" in the HTML source code for each
5) Apply patch and refresh page
6) View page source, confirm that class has been changed
I tested this by first applying the patch for bug 17919 to catch the
check-in software error. Patch working as expected :)
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 26 Jan 2017 11:43:14 +0000 (12:43 +0100)]
Bug 17334: Format the date according to the system preference
- Use KohaDates TT plugin to format the date correctly
- Do not use a temporary variable
- Replace:
patron's info Requested: Datetime
with
patron's info - Requested on Datetime
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Alex Buckley [Fri, 20 Jan 2017 03:59:24 +0000 (03:59 +0000)]
Bug 17334- Added a timestamp to the members-update.tt To show the user when the pending modifications were requested.
Test plan:
1.Log into OPAC and click on Lists->Your Lists->your personal details
2. Change/add a value in that form
3. Select the 'Submit update request'
4. Log into the Koha staff interface, then go to the url:
cgi-bin/koha/members/members-update.pl
5. You will see near the top of each box containing a pending request the following are displayed: surname, firstname,
patron category, branch, and cardnumber but no timestamp.
6. Apply this patch
7. Repeat steps 1,2, 3, 4
8. You will now see timestamp in the format "Requested: YYYY-MM-DD
HH:MM:SS" next to each patrons details near the top of each pending
request box.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 27 Feb 2017 12:21:18 +0000 (13:21 +0100)]
Bug 16966: [QA Follow-up] Check count, not size in template
The method size is not covered by tests at koha-tmpl/intranet-tmpl/prog/en/modules/tools/cleanborrowers.tt line 163.
The method size is not covered by tests at koha-tmpl/intranet-tmpl/prog/en/modules/tools/cleanborrowers.tt line 183.
Script cleanborrowers passes patrons_to_delete and patrons_to_anonymize to
the template. One is an array ref where we should use 'size', the other is a
Koha::Patrons object where we should use 'count'.
If we don't, we will not anonymize a lot of records ;)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 24 Feb 2017 11:34:26 +0000 (12:34 +0100)]
Bug 16966: move parameters to hashref
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 24 Feb 2017 11:25:33 +0000 (12:25 +0100)]
Bug 16966: Fix small QA issues
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 17 Feb 2017 09:39:09 +0000 (10:39 +0100)]
Bug 16966: Teach K::S::R::OldIssue its Koha objects class
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 20 Dec 2016 11:15:10 +0000 (12:15 +0100)]
Bug 16966: The method should return a Koha::Patrons object
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 20 Dec 2016 10:08:35 +0000 (10:08 +0000)]
Bug 16966: Make the tests pass again
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 22 Jul 2016 16:25:24 +0000 (17:25 +0100)]
Bug 16966: Koha::Patrons - Move GetBorrowersWithIssuesHistoryOlderThan to search_patrons_to_anonymise
The C4::Members::GetBorrowersWithIssuesHistoryOlderThan subroutine is supposed
to return the patrons with an issue history older than a given date.
It would make more sense to return a list of Koha::Patrons.
On the way, the code from AnonymiseIssueHistory will be moved as well to
anonymise_issue_history.
Note that these 2 subroutines are strongly linked: one is used to know the
number of patrons we will anonymise the history, the other one is used to
anonymise the issues history. The problem is that the first one is not used to
do the action, but only for displayed purpose.
In some cases, these 2 values can differ, which could be confusing.
Case 1:
The logged in librarian is not superlibrarian and IndependentBranches is set:
if 2+ patrons from different libraries match the date parameter, the interface
will display "Checkout history for 2 patrons will be anonymized", when actually
only 1 will be.
Case 2:
If 2+ patrons match the date parameter but one of them has his privacy set to
forever (privacy=0), the same issue will appear.
This patch moves the code from C4::Members::GetBorrowersWithIssuesHistoryOlderThan
to Koha::Patrons->search_patrons_to_anonymise and from
C4::Circulation::AnonymiseIssueHistory to
Koha::Patrons->anonymise_issue_history
Test plan:
1/ Confirm the 2 issues and make sure they are fixed using the Batch
patron anonymization tool (tools/cleanborrowers.pl)
2/ At the OPAC, use the 'Immediate deletion' button to delete all your
reading history (regardless the setting of the privacy rule)
3/ Use the cronjob script (misc/cronjobs/batch_anonymise.pl) to
anonymise patrons.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 22 Jul 2016 15:43:56 +0000 (16:43 +0100)]
Bug 16966: Koha::Patrons - Move AnonymiseIssueHistory tests
The next patch will move C4::Circulation::AnonymiseIssueHistory and
C4::Members::GetBorrowersWithIssuesHistoryOlderThan to Koha::Patrons
This patch move the history anonymisation code to the Patrons.t test
file and the entire subtest related to StoreLastBorrower to
StoreLastBorrower.t
It just moves and add some minor adjustements.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 22 Jul 2016 14:57:26 +0000 (15:57 +0100)]
Bug 16966: GetBorrowersWithIssuesHistoryOlderThan - Highlight the existing issue in tests
If IndependentBranches is set, the code is buggy. This patch only
highlight the bug by providing a test.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Tue, 21 Feb 2017 18:13:02 +0000 (13:13 -0500)]
Bug 13968: Follow up - Clean HTML tags for hints
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Sat, 18 Feb 2017 16:15:06 +0000 (17:15 +0100)]
Bug 13968 - Branch email hints are misleading
This patch replaces missleading notes with Reply-To and Return-Path fields
to reflect indicate falback values if they are empty (ReplyToDefault and
ReturnpathDefault system prefs).
To test:
- Apply patch
- In Home > Administration > Libraties and Groups, edit a library
- Verify that hints display for fields Reply-To and Return-Path, indicating
their default values.
Amended to remove extra </li> - 2017-02-21 mv
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 14 Feb 2017 09:52:14 +0000 (10:52 +0100)]
Bug 18087: Handle invalid filetypes
If an invalid file is used as biblionumber list, we should display a
message.
Test plan:
1/ Use csv, plain text files
=> Should work
2/ Use invalid files (binary files like pdf, doc*, xsl*, etc.)
=> Should not work and see a warning message.
Amended patch after signoff: Remove one warn debug line
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Joy Nelson [Thu, 9 Feb 2017 19:42:57 +0000 (11:42 -0800)]
Bug 18087 - Clarification on File type when using file of biblionumbers to export data
Added a line to the screen detailing the types of files that can be used to upload a list of biblionumbers.
Test plan:
1. Go to tools->export data
2. under File option, (File types accepted: .csv and .txt) should appear
3. Check both Bibliographic and Authority Export screens for this new string.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tomas Cohen Arazi [Wed, 25 Jan 2017 12:35:42 +0000 (09:35 -0300)]
Bug 17992: REST api: Remove the use of ->unblessed from Cities controller
As bug 17932 adds TO_JSON to Koha::Object(s), there's no need for using
it. Also, as this is a reference implementation for developers to copy
and paste it is sensible to make this change even when this is not
causing any bug.
To test:
- Apply the patch
- Run:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ prove t/db_dependent/api/v1/cities.t
=> SUCCESS: Tests still pass!
- Sign off :-D
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Fri, 3 Mar 2017 16:54:15 +0000 (16:54 +0000)]
Bug 18160 [QA Followup] - Correct whitespace
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Thu, 23 Feb 2017 16:47:00 +0000 (11:47 -0500)]
Bug 18160: Follow up tweak if condition
Based on comment #9, moved if condition.
Based on comment #8, tweaked condition to grab preference.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Thu, 23 Feb 2017 00:35:13 +0000 (00:35 +0000)]
Bug 18160 - Error when OverDriveCirculation not enabled
This patch only executes OverDrive circulation JS if
OverDriveCirculation pref is enabled
To test:
1 - Disable OverDriveCirculation
2 - Log in to opac and view summary tab
3 - Note 'Internal server error'
4 - Apply patch
5 - Repeat and note error is not present
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Francesco Rivetti [Mon, 20 Feb 2017 10:02:40 +0000 (11:02 +0100)]
Bug 17941 add tests to cover the optimization of the nested loop
the new code skip testing for more borrowers if the item can't be renewed
this require more tests for the case where 2+ items are reserved.
I tried to add 1 more reserve to the main test suit, but too many other tests
rely on specific holds, and I couldn't get around it.
Instead, I added a subtest that consider the specific simple case and leave the
other test cases exactly has they were designed.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended-patch: Just fix 3 indendations
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Francesco Rivetti [Tue, 14 Feb 2017 10:16:01 +0000 (11:16 +0100)]
Bug 17941 don't compute priority more than needed
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Francesco Rivetti [Tue, 14 Feb 2017 10:13:51 +0000 (11:13 +0100)]
Bug 17941 avoid scanning the full cartesian product
when a item match a borrower, there is no point in checking the
other borrowers
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Fri, 3 Mar 2017 16:45:22 +0000 (16:45 +0000)]
Bug 17260 - DBRev 16.12.00.011
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 24 Feb 2017 08:08:30 +0000 (08:08 +0000)]
Bug 17260: Update existing installs
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Blou [Fri, 27 Jan 2017 16:51:26 +0000 (16:51 +0000)]
Bug 17260: updatedatabase.pl fails on invalid entries in ENUM and BOOLEAN columns
The loading of file admin/searchengine/elasticsearch/mappings.yaml
specifies 'type' as empty, which fails with Mysql 5.7+ which is more
stringent.
Also, forcing an empty value into a boolean also fails.
Both issues arise when updatedatabase.pl hit 3.23.00.050.
NOTE: both issues could also be resolved by actually setting values in
the load file. This doesn't make this solution incorrect, though.
To Test/reproduce:
-1) Happens with Mysql 5.7.4. Maybe earlier, but certainly at
that point. Use a Xenial kohadevbox to more easily test.
0) Find a database on 3.22 or earlier, save it.
a) place
sql_mode=IGNORE_SPACE,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION
into the [mysqld] section of /etc/mysql/mysql.conf.d/mysqld.cnf
b) restart you mysql server
c) drop the db and recreate it
d) checkout the 3.22.x branch
e) do a web install
f) remove the added sql_mode
g) restart the mysql server
1) Set your code base to master
2) run updatedatabase.pl
3) See the errors on 3.23.00.050
4) Apply the patch
5) Reload the 3.22 db.
a) repeat steps 0(a)-0(g)
b) don't forget the caching issues
6) succeed with updatedatabase.pl
7) drop the db and recreate it
8) run the web installer
9) notice no issues either.
10) run koha qa test tools
NOTE: This bug only solved the upgrade portion.
I added the kohastructure.sql change as well.
I confirmed that all the code changes were
triggered with this test plan.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Mehdi Hamidi <mehdi.hamidi@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 23 Nov 2016 14:47:10 +0000 (14:47 +0000)]
Bug 17216: Fix SQL statement to setting marc_subfield_structure.authorised_value to NULL
We want to update it if it's empty, not equal to ';'
nopaste vim mode is to blame
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Mon, 27 Feb 2017 01:41:27 +0000 (20:41 -0500)]
Revert "Bug 12461 - Add patron clubs feature"
This reverts commit
4f1eefdbb8bf4df07b03fc451c1c18ebe989c8b7.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tomas Cohen Arazi [Fri, 24 Feb 2017 12:22:26 +0000 (09:22 -0300)]
Bug 16034: (followup) Fix DB update and schema files
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Fri, 23 May 2014 15:54:26 +0000 (11:54 -0400)]
Bug 12461 - Add patron clubs feature
This features would add the ability to create clubs which patrons may be
enrolled in. It would be particularly useful for tracking summer reading
programs, book clubs and other such clubs.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Ensure your staff user has the new 'Patron clubs' permissions
4) Under the tools menu, click the "Patron clubs" link
5) Create a new club template
* Here you can add fields that can be filled out at the time
a new club is created based on the template, or a new enrollment
is created for a given club based on the template.
6) Create a new club based on that template
7) Attempt to enroll a patron in that club
8) Create a club with email required set
9) Attempt to enroll a patron without an email address in that club
10) Create a club that is enrollable from the OPAC
11) Attempt to enroll a patron in that club
12) Attempt to cancel a club enrollment from the OPAC
13) Attempt to cancel a club enrollment from the staff interface
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Kyle M Hall [Tue, 21 Feb 2017 20:01:17 +0000 (20:01 +0000)]
Bug 16034 - DBRev 16.12.00.010
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Srdjan [Fri, 29 Jul 2016 00:42:23 +0000 (12:42 +1200)]
Bug 16034 follow-up: added WebService::ILS to PerlDependencies
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Srdjan [Tue, 8 Dec 2015 06:07:41 +0000 (19:07 +1300)]
bug_16034 Add overdrive info to the users page in the public interface
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Chris Cormack [Tue, 18 Aug 2015 03:55:51 +0000 (15:55 +1200)]
bug_16034 Adding a new syspref - OverDriveCirculation
If set to true, Opac will integrate OverDrive patron services
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Srdjan [Tue, 8 Dec 2015 06:06:27 +0000 (19:06 +1300)]
bug_16034 Koha::ExternalContent::OverDrive - a wrapper around WebService::ILS::Overdrive::Patron
* Using the upstream module for all the heavy lifting
* opac/external/overdrive/auth.pl - 3-legged authentication handler
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Wed, 8 Feb 2017 02:07:29 +0000 (02:07 +0000)]
Bug 18077: Batch item modification link is bold when batch item deletion is active in tools menu
To test:
1) Go to Tools -> Batch item deletion
2) Notice the link for Batch item MODIFICATION is bold, not the deletion
link
3) Apply patch and refresh page
4) Correct link should now be bold.
5) Go to batch item modification and confirm the correct link is bold
Sponsored-by: Catalyst IT
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Re-tested, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Tue, 14 Feb 2017 02:13:33 +0000 (02:13 +0000)]
Bug 18109: Adding font awesome icon to uncertain prices button
To test:
1) Go to Acquisitions -> search for a vendor
2) View a basket with uncertain prices or add an order with uncertain
prices to a basket
3) Confirm that font awesome icon is appropriate and button still works
as expected
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Caitlin Goodger [Thu, 19 Jan 2017 00:54:24 +0000 (00:54 +0000)]
Bug 17852 Follow up.Multiple URLs (856) in list email are broken
This is a follow-up to my previous patch. This fixes it on the OPAC and
the previous one was from the intranet
Test Plan
1: Add multiple urls to a biblographic record
2: Add the biblographic record to a list and then email it from the OPAC
3: See that the links are broken and have been merged into one.
4: Apply patch
5: Send the list again and see that the links work
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Caitlin Goodger [Tue, 17 Jan 2017 21:37:49 +0000 (21:37 +0000)]
Bug 17852; Multiple URLs (856) in list email are broken.
Test Plan
1: Add multiple urls to a biblographic record
2: Add the biblographic record to a list and then email it.
3: See that the links are broken and have been merged into one.
4: Apply patch
5: Send the list again and see that the links work
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Luke Honiss [Tue, 17 Jan 2017 02:27:55 +0000 (02:27 +0000)]
Bug 17865 'If a subscription has no history end date, it shows as expired today in OPAC'
--TEST PLAN--
1) View a subscription with no history end date
2) Search for an item with a subcription in OPAC
3) Under subscription tab click more details
4) The end date will be the current date
5) Apply patch and refresh
6) The end date will not be shown
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 20 Feb 2017 09:49:11 +0000 (10:49 +0100)]
Bug 18026: Correct URL to database columns from .pref files
Recently the DB schema website has been updated.
The link to the columns' tables is now
http://schema.koha-community.org/master/tables/table.html
http://schema.koha-community.org/16_11/tables/table.html
http://schema.koha-community.org/16_05/tables/table.html
instead of
http://schema.koha-community.org/tables/table.html
To have a specific schema per Koha version.
To avoid fixing this link every release this patch adds a __VERSION__
marker to replace with the $version if stable ($version % 2) or 'master'
Test plan:
On master, 16.11.x and 16.05.x
Search for PatronSelfRegistrationBorrowerUnwantedField,
BorrowerMandatoryField and UniqueItemFields
Click on the link
You should get the correct page
This patch WILL NOT WORK on 3.22.x
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Sun, 19 Feb 2017 04:06:16 +0000 (23:06 -0500)]
Bug 18111: Swap framework_name and frameworkcode
With the frameworkcode changed to an empty string, which really
is closer to the physical reality, some javascript somewhere
breaks. This means the spinner does not appear when you confirm
that you wish to import it.
TEST PLAN
----------
1) apply first patch
2) export default framework, doesn't matter format
3) import default framework using that file.
4) answer yes or whatever it is.
-- spinner does not appear.
5) apply this patch
6) import default framework use the same file.
7) answer yes or whatever it is.
-- spinner does appear.
8) decide if you wish to find and fix the javascript conditions.
if yes -- do so, and then obsolete this once you have.
if not -- sign this off after running koha qa test tools
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 14 Feb 2017 16:21:45 +0000 (16:21 +0000)]
Bug 18111: Fix import of default framework
Caused by bug 16035.
Recreate the issue:
Go to Home › Administration › MARC frameworks
For the default framework: Actions > import
It will not work
Test plan:
Confirm test plans from bug 16035 and bug 17389 still pass
Confirm that the import for the default framework now works
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Magnus Enger [Tue, 18 Oct 2016 09:47:19 +0000 (09:47 +0000)]
Bug 17461: Warn about plugins that can't be loaded
The logs should have some info if a module has been installed that can
not be loaded.
To test:
- Make sure you have an up to date dev install
- Install v1.0 of the KitchenSink plugin from
https://github.com/bywatersolutions/koha-plugin-kitchen-sink/releases
- Make sure the plugin does not show up in the list of installed
plugins, and that the intranet-error.log has no info about it
- Apply the patch
- Reload plugins-home.pl
- Verify that there is now some interesting info in intranet-error.log
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Works as advertised, generates useful diagnostic information in the form of a log entry to either intranet-error or plack-error.log. Relief, thanks Magnus!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Fri, 17 Feb 2017 17:17:12 +0000 (17:17 +0000)]
Bug 17453 - DBRev 16.12.00.009
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Wed, 15 Feb 2017 20:13:14 +0000 (20:13 +0000)]
Bug 17453 (QA Followup)
Add line break before note message
https://bugs.koha-community.org/show_bug.cgi?id=14753
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 10 Feb 2017 07:54:39 +0000 (08:54 +0100)]
Bug 17453: Take into account items that are lost or damaged
If all the items are either lost, damaged or checked out, then pickup
should be allowed.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14753
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 9 Feb 2017 17:46:38 +0000 (18:46 +0100)]
Bug 17453: Add a visible notification to patron to explain why the hold locations are disabled
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14753
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 31 Oct 2016 11:16:05 +0000 (11:16 +0000)]
Bug 17453: Allow pickup at a library where all items are checked out
If all items are checked out then it should be possible to select the pickup
library for that record.
Signed-off-by: Janet McGowan <janet.mcgowan@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14753
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 24 Oct 2016 09:02:19 +0000 (09:02 +0000)]
Bug 17453: Add exceptions
This patch adds the ability to define patron categories not affected by
the behavior of OPACHoldsIfAvailableAtPickup.
The new pref OPACHoldsIfAvailableAtPickupExceptions get a list of patron
categories (separated by pipes |).
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14753
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 18 Oct 2016 13:02:58 +0000 (14:02 +0100)]
Bug 17453: Inter-site holds improvement
At the moment users can reserve items and choose any library as a pick up
location, but there is no mechanism to prevent users from reserving items that
are available on the shelf at any given location from reserving the item at the
same location, essentially creating a Fetch and Collect scenario.
This has an impact on staff workloads as they are having to process reservations
and check shelves for items that students can already come and collect from the
open library shelves.
The aim of this enhancement is to decrease the impact on staff workload there
should be a restriction in place that prevents users from requesting items for
collection at a library where the item is currently available.
Implementation:
We first tried to add a new circulation rule adding a 4th
“NotIfAvailableAtPickupLibrary” option to "On shelf holds allowed".
That would make the development more flexible.
But in that case we quickly faced non-trivial problematics:
Let's say you have 3 items I1, I2 and I3. The first one has onshelfholds
set to Yes and 2 others has it set to “NotIfAvailableAtPickupLibrary”.
What would be the expected behavior if a hold is placed at biblio level?
And if a hold is placed at item level for I1?
This second point could be answered by reworking the interface to move
the libraries dropdown list elsewhere (1 list per item) or by adding a
lot of JS code to handle the different situation. But it would be
much more complicated to implement.
So finally I moved back to the simple approach and added a new pref to
handle the behavior globally.
Test plan:
0/ Switch off OPACHoldsIfAvailableAtPickup
1/ Let's say you have 3 libraries L1, L2, L3, create 2 items owned by L1
and L2
2/ Place a biblio level hold. You should only be able to pick it up at
L3
2/ Place a item level hold. You should only be able to pick it up at
L3
3/ Create a third items owned by L3
4/ Now you should not be able to place a hold on this record anymore
Sponsored-by: University of the Arts London
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14753
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 18 Oct 2016 12:06:55 +0000 (13:06 +0100)]
Bug 17453: Add pref OPACHoldsIfAvailableAtPickup
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14753
Jonathan Druart [Tue, 14 Feb 2017 12:42:41 +0000 (13:42 +0100)]
Bug 14405: Remove pagination type, there is no pagination at the OPAC
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Thu, 2 Feb 2017 04:16:53 +0000 (04:16 +0000)]
Bug 14405: Add datatables to fines table in OPAC
To test:
1) Apply patch
2) Go to OPAC -> Your account
3) Confirm you can now sort on all columns
Sponsored-by: Catalyst IT
NOTE: NICE!
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Thu, 2 Feb 2017 23:30:43 +0000 (23:30 +0000)]
Bug 11932: Move delete checkbox on patron modification to right
To test:
1) Go to Tools -> Batch patron modification
2) Put in a user cardnumber and click Continue
3) Notice checkboxes on the left of the input fields
4) Apply patch and refresh page (resend information if prompted)
5) Notice checkboxes on the right of the input fields
6) Confirm they still work as expected
Sponsored-by: Catalyst IT
NOTE: Why not left before the label? And while functional,
is there a pretty align it nicely with all the other
checkboxes CSS styling somehow?
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Wed, 15 Feb 2017 00:03:28 +0000 (00:03 +0000)]
Bug 7626: Delete multiple tags in OPAC at once
This patch removes the individual 'Delete' buttons for every tag as
suggested in Comment 0. It adds a checkbox to every tag, with a 'Delete
selected tags' button at the bottom of the table. This patch also adds a
function to check if any checkboxes have been checked before submitting
the form (only works with JS enabled).
To test:
1) Find a record in the OPAC and add some tags to it
2) Go to your tags and notice the checkboxes, no more delete buttons for
each tag
3) Click 'Delete selected tags' button without selecting any tags
4) Confirm alert shows up. Click OK
5) Select one or more tags and click 'Delete selected tags' button
6) Confirm delete is successful and correct number of deleted tags shows
up
Sponsored-by: Catalyst IT
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
David Cook [Mon, 13 Feb 2017 05:39:41 +0000 (16:39 +1100)]
Bug 18099 - Put call number in its own column on inventory screen
TEST PLAN
0) Apply patch
1) Create an item with a call number in 952$o (e.g. ABC 123)
2) Using the inventory tool, make sure you "Select items you want to check"
which include that item (e.g. Item callnumber between: A and C)
3) Click "Submit"
4) The call number appears in the column marked "Call number"
instead of appearing as [ABC 123] under the library in the
"Library" column
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Mon, 6 Feb 2017 13:58:06 +0000 (14:58 +0100)]
Bug 18063: Remove dead code from tools/manage-marc-import.tt
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Thu, 2 Feb 2017 22:58:34 +0000 (22:58 +0000)]
Bug 18040: Updating buttons in Tools -> Upload local cover image
To test:
1) Go to Tools -> Upload local cover image
2) Select an image and click Upload file
3) Notice Process images button looks different to Upload file button
4) Apply patch and refresh page
5) Follow steps 1-3 again and notice the changed styling of the buttons
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 3 Feb 2017 07:08:07 +0000 (08:08 +0100)]
Bug 18036: [QA Follow-up] Descriptions and mock_preference
Adjusted a few test descriptions.
The test depends on template being set to prog. Made that explicit by
adding a mock_preference. If you change the mock to bootstrap, this
test will fail.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Thu, 2 Feb 2017 17:04:37 +0000 (12:04 -0500)]
Bug 18036: All 4 cases tested
Added theme, lang, and availablethemes tests for all 4 cases.
Previously just availablethemes was tested.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The warns from Mark's additional patch showed all four cases.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Thu, 2 Feb 2017 17:16:01 +0000 (12:16 -0500)]
Bug 18036: Perlcritic improve t/db_dependent/Templates.t
TEST PLAN
---------
1) apply 17982
2) perlcritic -3 t/db_dependent/Templates.t
-- messages
3) apply this patch
4) perlcritic -3 t/db_dependent/Templates.t
-- OK
5) run koha qa test tools
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 19 Jan 2017 17:03:55 +0000 (18:03 +0100)]
Bug 17968: Remove useless variable $item_format in C4::Overdues::parse_overdues_letter
The variable $item_format is not used and should be removed from this
subroutine.
Moreover it the letter parameter, but it is never sent to this
subroutine. letter_code is expected instead.
Test plan:
No test plan, just read the code and `git grep `
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Mon, 23 Jan 2017 22:32:39 +0000 (22:32 +0000)]
Bug 17947: Searching my library first shows the branchcode by the search bar rather than branchname
Test Plan
1: Turn on SearchMyLibraryFirst and go into OPAC
2: It should say Search (in <Branch Code> Only)
3: Apply patch and refresh page. It should now say Search (in <Library Name> only)
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Fri, 13 Jan 2017 00:19:48 +0000 (00:19 +0000)]
Bug 17895: 'Re-set' typo fix
To test:
1) Log into OPAC and go to change your password
2) Enter current password incorrectly and click Submit changes
3) Observe error message and typo 're-set'
4) Apply patch and refresh page
5) May be asked to resend data - if so, click Resend, if not, repeat
step 2
6) Observe error message and corrected spelling of 'reset'
Sponsored-by: Catalyst IT
Signed-off-by: Caitlin Goodger <caitlingoodger.student@wegc.school.nz>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Wed, 4 Jan 2017 16:11:03 +0000 (16:11 +0000)]
Bug 17846: Remove get_infos_of declaration
The function which was removed was still being exported.
This removes it completely.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 4 Jan 2017 11:39:18 +0000 (12:39 +0100)]
Bug 17846: Remove C4::Koha::get_infos_of
This subroutine does not longer make any senses. The call to
get_infos_of can be replaced with $dbh->selectall_hashref.
The third argument of this subroutine was never used.
Test plan (for developer only):
Compare the 2 codes and confirm that they are equivalent
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Mon, 9 Jan 2017 14:53:11 +0000 (14:53 +0000)]
Bug 17793: Follow up for identified missing changes
I ran:
$ git grep -l cat-search.inc | grep admin
This means I believe the outstanding ones are
(koha-tmpl/intranet-tmpl/prog/en/modules/):
- admin/auth_subfields_structure.tt
- admin/clone-rules.tt
- admin/marc_subfields_structure.tt
- admin/searchengine/elasticsearch/mappings.tt
One other was recommended by Katrin in comment #9:
- plugins/plugins-home.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Mon, 19 Dec 2016 22:56:12 +0000 (22:56 +0000)]
Bug 17793: Make sysprefs search show on all Admin pages
This patch is amended to use the sysprefs search on all Administration
pages that do not have their own custom search.
To test:
1) Go to Administration
2) Notice Catalogue search at the top - seems out of place.
3) Apply patch and refresh page.
4) Notice admin / sysprefs search now shows and is more appropriate.
5) Confirm searching for sysprefs still works
This patch affects the following pages:
- admin-home.pl
- audio_alerts.pl
- authtypes.pl
- auth_tag_structure.pl
- authorised_values.pl
- biblio_framework.pl
- marctagstructure.pl
- branch_transfer_limits.pl
- branches.pl
- checkmarc.pl
- classsources.pl
- columns_settings.pl
- didyoumean.pl
- edi_accounts.pl
- edi_ean_accounts.pl
- fieldmapping.pl
- item_circulation_alerts.pl
- items_search_fields.pl
- items_search_field.pl
- item_types.pl
- koha2marklinks.pl
- matching-rules.pl
- oai_sets.pl
- oai_set_mappings.pl
- patron-attr-types.pl
- smart-rules.pl
- transport-cost-matrix.pl
- sms_providers.pl
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tomas Cohen Arazi [Tue, 24 Jan 2017 13:48:31 +0000 (10:48 -0300)]
Bug 17932: (followup) Tidy tests
This patch makes the tests create its own data instead of searching the
DB for a branchcode and a categorycode. It does so on each subtest,
because there shouldn't be side effects between subtests.
I also wrapped each subtest inside a transaction, for the same reason.
To test:
- Apply this patch
- Run:
$ prove t/db_dependent/Koha/Object.t
=> SUCCESS: Tests return green with this patch
- Sign off :-D
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tomas Cohen Arazi [Tue, 24 Jan 2017 13:41:00 +0000 (10:41 -0300)]
Bug 17932: Unit tests
This patch adds unit tests for the Koha::Object::TO_JSON function.
It tests on top of Koha::Patron as Koha::Object needs to be
instantiated.
To test:
- Apply the patch
- Run:
$ prove -v t/db_dependent/Koha/Object.t
=> SUCCESS: New tests for TO_JSON are run and return green.
- Sign off :-D
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tomas Cohen Arazi [Mon, 23 Jan 2017 12:47:54 +0000 (09:47 -0300)]
Bug 17932: (followup) Fix /patrons endpoint
Bug 17927 introduced data type fixes on the /patrons endpoint (integer
and boolean types got fixed). This led to the /patrons endpoint not to
work because the underlying code didn't provide the right data.
With the introduction of TO_JSON on Koha::Object(s) we now have a way to
output the proper data types.
This patch does so by:
- Adding is_boolean => 1 to the relevant columns on the Borrower.pm
schema file.
- Tweaking the controller class for the /patrons endpoint so it doesn't
use the $object(s)->unblessed call but just let the Mojo::JSON library
pick out TO_JSON implementation instead on rendering the output.
- It adds a new test for booleans.
To test:
- Have 17927 applied
- Run:
$ prove t/db_dependent/api/v1/patrons.t
=> FAIL: Tests fail [1]
- Apply this patches
- Run:
$ prove t/db_dependent/api/v1/patrons.t
=> SUCCESS: Tests pass!
- Sign off! :-D
[1] It is self explanatory to just try the API using any of the
available tools (I use HttpRequester on Firefox)
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tomas Cohen Arazi [Wed, 18 Jan 2017 18:37:42 +0000 (15:37 -0300)]
Bug 17932: Add a TO_JSON method to Koha::Object(s)
Bug 17927 fixes data types on the current REST endpoints. If you
test those endpoints, you will notice trying to access them (for listing
or retrieving single objects yields a data type error. Notably on
booleans but also on integers.
Integers fail due to https://rt.cpan.org/Ticket/Display.html?id=119904
but it needs some global solution until there's a DBD::mysql release
backported to the supported distros. There's the option to use
http://search.cpan.org/~frew/DBIx-Class-Helpers-2.033002/lib/DBIx/Class/Helper/Row/NumifyGet.pm
to get the integer columns fixed as a workaround:
__PACKAGE__->add_columns(
borrowernumber => {
data_type => 'integer',
is_nullable => 0,
is_numeric => 1,
}
);
I didn't find bug reports related to this (maybe because we don't use
warnings everywhere) But I don't think is worth going such a heavy
overhead.
A similar situation takes place for Boolean values. They need to be
prepared for JSON output. This could have been done using DBIx filters
as pointed out by Martin:
__PACKAGE__->filter_column(
lost => {
filter_to_storage => sub { $_[1] ? 1 : 0 },
filter_from_storage =>
sub { $_[1] ? Mojo::JSON->true :
Mojo::JSON->false }
}
);
but this could have other consequences that are worth exploring on
another bug (i.e. it would mean we need to take care of every place
where this boolean data is used/set needs to handle this data types
nicely. Such would be the case if we were a Mojo-only app, but we
aren't. We use Koha::Obect(s) in the whole app. Period.
This patch adds the need to specify on the schema files, columns that
are actually boolean, because we have no way to detect them for now
(i.e. they are all tinyint, but we use tinyint for non-boolean stuff
too).
So if this patch is accepted, we would need to specify boolean columns
like this:
__PACKAGE__->add_columns(
'+lost' => {
is_boolean => 1
}
);
This patch adds a TO_JSON method for Koha::Object(s) to be used for
serializing Koha::Object-derived objects into JSON strings.
To test it (as Koha::Object(s) need to be instantiated) I provide tests
on top of the Koha::Patron(s) classes in the followup patches.
[1] Yes, we use TINYINT(1) for booleans, but from DBIC's perspective
there's no way to read the (1) in runtime.
Sponsored-by: ByWater Solutions
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 15 Nov 2016 10:17:22 +0000 (10:17 +0000)]
Bug 17627: Move C4::Koha::GetItemTypesByCategory to Koha::ItemTypes
C4::Koha::GetItemTypesByCategory can be easily replaced with
Koha::ItemTypes->search({ searchcategory => ? });
So let's replace it where it is used.
Test plan:
Make sure this patch does not break the test plan of bug 10937
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
remi [Wed, 9 Mar 2016 16:48:31 +0000 (11:48 -0500)]
Bug 16018: Merge.pl code cleanup
Original patch from Remi Mayrand-Provencher.
Amended by Marcel de Rooy (January 2017), part of omnibus bug 17908.
EDIT:
We cannot remove the ModAuthority call, since the reference record is
the result of the merge and should be saved.
Variable $overwrite is not used and can be removed.
It is not useful to postpone a merge to the cron job here, since the
old authority record is deleted. (Note that bug 9988 will address this
subject too.)
Removing the call to C4::ImportBatch::SetImportRecordStatus: Since
$recordid2 is not an import_record_id, this is useless and potentially wrong.
Removed the if statement for @errors, since it is not used at this point;
putting the result of a comparison into $error is not useful either.
Note: there is a lot of code in merge.pl around breeding that is actually
unused. Template tools/manage-marc-import.tt contains two unused blocks
final_match_link and match_link that contain a (unreachable) call to
authorities/merge.pl with parameters:
mergereference=breeding&authid=[% record_lis.match_id %]&authid=[% record_lis.import_record_id %]
It seems that this would show the records correctly, but would not merge
them correctly since that code expects two authority records.
Leaving the signoff of Mehdi since he essentially tested the merge call.
Test plan:
[1] Restart Plack and restart koha-indexer. (I had some problems related to
indexing as a result of the marcxml transition.)
[2] Go to Authorities.
Select two authorities to merge, start with two of the same type.
Make sure that both are used in a few biblio records.
Select at least one subfield from the authority to be removed for
inclusion in the authority to be kept ("reference record").
[3] Click Merge. You come back to the kept authority record.
Note: The number of attached records may not yet be updated. This depends
on the speed of koha-indexer. If you wait a bit and refresh, you should
have the correct number.
First check the authority record again for the inserted subfield.
Now check a biblio that was ALREADY attached to the reference record.
And check a biblio that was FORMERLY attached to the deleted one.
Note: See bug 17913 to see how pref AuthorityMergeMode impacts this.
[4] Try steps 2 and 3 again for a merge of two authority records that do not
have the same authority type noting the remarks below.
For instance try to merge from a CORPO_NAME to a PERSO_NAME record.
Make a change in say 040$a of the record to be deleted. And select that
field later on the merge form.
Normally, you would use the PERSO_NAME framework in the merge now.
When checking the authority record, look at 040a. When checking the
record that was linked to the CORPO_NAME, check if it contains the
PERSO_NAME authority in the correct field (say 100, 600, 700).
Signed-off-by: mehdi <mehdi@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested merging PERSO_NAME to PERSO_NAME and PERSO_NAME to CORPO_NAME.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 16 Feb 2017 14:07:05 +0000 (14:07 +0000)]
Bug 16749: Add is_instance check to koha-upgrade-schema
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Thu, 16 Feb 2017 13:33:57 +0000 (14:33 +0100)]
Bug 16749: Check instancename in adjust_paths_dev_install
Check if the instance does not exist (or was not even passed).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 16 Feb 2017 12:57:17 +0000 (12:57 +0000)]
Bug 16749: Use is_instance to make sure the dev instance exist
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 13 Feb 2017 07:56:17 +0000 (08:56 +0100)]
Bug 16749: Go with a boolean flag, we love booleans
As requested by Jonathan on comment 10 on Bugzilla and supported by Tomas,
we should use the dev_install entry in koha-conf as a boolean flag.
Since we already used it as a path, this patch is not too strict about it.
If the entry is not empty and not equal to "0", we will interpret it as
a true value. The path is taken from the intranetdir entry.
Test plan:
[1] Copy debian/scripts/koha-functions.sh to /usr/share/koha/bin
[2] For a dev install:
Remove the dev install line, or toggle its value between empty string,
0 or 1 and each time test stop/start koha-indexer.
Check the path to rebuild_zebra with ps aux|grep indexer.
If you have no entry, an empty entry or a zero, you should see a regular
path.
(Note: You can do something similar with koha-start-sip.)
[3] For a regular install:
Remove the dev install line.
Stop/start koha-indexer or koha-plack, and verify that it still works.
Add a dev_install line with 0, and repeat stop/start.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 12 Sep 2016 09:51:22 +0000 (11:51 +0200)]
Bug 16749: Update debian docs for koha-translate
This patch adds the -d option to the documentation (with thanks to
Magnus Enger).
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Thu, 16 Jun 2016 08:38:54 +0000 (10:38 +0200)]
Bug 16749: Adjustments for koha-translate
[AMENDED February 10, 2017]
[1] Added reading /etc/default/koha-common as in the other debian scripts.
We need it for KOHA_HOME.
[2] Add a -d|--dev parameter for dev installs.
[3] No hardcoded PERL5LIB or KOHA_INSTALL_DIR (KOHA_HOME).
They are read from default file or set by adjust_paths_dev_install.
[4] Adjust template paths for dev installs: OPAC_TMPL, INTRANET_TMPL.
[5] Remove references to obsolete themes ccsr and prog.
Test plan:
[1] Regular package install:
Copy koha-translate to /usr/sbin.
Run koha-translate -l to show installed languages.
Run koha-translate -l -a to show available languages.
Add a language: koha-translate -i nl-NL.
Check template folders in regular location (/usr/share/koha/...)
Remove a language: koha-translate -r nl-NL. Check again.
[2] Dev install or kohadevbox:
Copy koha-translate to /usr/sbin.
If needed, add the <dev_install> line to koha-conf.xml.
Run koha-translate -l -d yourinstance to show installed languages.
(Note: You only see the languages installed in this instance.)
Add a language: koha-translate -i nl-NL -d yourinstance.
Check template folders in the clone.
Remove a language: koha-translate -r nl-NL -d yourinstance.
Note: Make sure you have sufficient file permissions for the kohaclone
files and koha-conf.xml. On kohadevbox you might need to run sudo
koha-translate within the the vagrant user context.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested on Jessie (Debian VM and Kohadevbox)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 10 Feb 2017 09:33:57 +0000 (10:33 +0100)]
Bug 16749: Adjustments for koha-plack
[1] Use run_safe_xmlstarlet for plack workers and requests
[2] Simplify adjust_paths. The lazy export statement is actually enough to
replace adjust_paths by one direct call to adjust_paths_dev_install.
Test plan:
[1] Copy koha-functions.sh and koha-plack:
cp [YOUR_PATH]/debian/scripts/koha-functions.sh /usr/share/koha/bin/
cp [YOUR_PATH]/debian/scripts/koha-plack /usr/sbin/
where YOUR_PATH might well be /home/vagrant/kohaclone.
[2] Make sure that you have dev_install in koha-conf.
Stop and start koha-plack. Verify with ps aux|grep plack.
[3] Rename dev_install to nodev_install (in start and end tag).
Now stop/start koha-plack. Verify with ps aux|grep plack.
[4] Change plack_requests to 51 in your koha-conf.
Restart Plack and check that you see 51 in ps aux|grep plack.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested on Jessie (Debian VM and Kohadevbox)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 10 Feb 2017 08:37:13 +0000 (09:37 +0100)]
Bug 16749: Adjust xmlstarlet calls in koha-functions
In various scripts we use xmlstarlet to extract values from koha-conf.
If we call xmlstarlet on non-existing entries in koha-conf, this may
however result in silently failing scripts (when set -e is in effect).
A function run_safe_xmlstarlet is added for situations where the entry
might not exist. It will not halt execution.
This patch only adjusts koha-functions.sh and modifies the xmlstarlet calls
for dev_install and zebra_loglevels.
Note: The function does not need to check file existence. If the file does
not exist, xmlstarlet warns about it; the function returns empty string,
but does not set an error exit status.
Test plan: See second patch ("koha-plack adjustments").
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 25 Jan 2017 10:33:43 +0000 (11:33 +0100)]
Bug 17990: Refactor Perl module versions check
The code is duplicated, variable are not set ($_), code is hard to read,
not covered by tests and the subroutine has 2 completely different
behaviors depending on the presence of the "module" parameter.
No need more ti rewrite it.
Test plan:
- Use koha_perl_deps.pl with the different options (-u -m -a -i)
- Go on the about page, "Perl modules" tab
You should not see any differences from before and after this patch
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Mon, 23 Jan 2017 22:41:15 +0000 (22:41 +0000)]
Bug 17977: Add acquisitions sidebar menu to suggestions
To test:
1) Go to Acquisitions -> Suggestions
2) Notice no acquisitions sidebar
3) Apply patch and refresh page
4) Sidebar menu should now show.
Sponsored-by: Catalyst IT
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Thu, 16 Feb 2017 11:04:11 +0000 (11:04 +0000)]
Bug 17974 (QA Followup)
Use the $biblio_rs variable
In case of Koha::Object you can call new_from_dbic directly, however,
it fails for Koha::Objects so using an intermediary variable should
be done for consistency
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sat, 21 Jan 2017 15:45:34 +0000 (16:45 +0100)]
Bug 17974: Add the Koha::Item->biblio method
Test plan:
prove t/db_dependent/Koha/Items.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Sat, 21 Jan 2017 15:47:03 +0000 (16:47 +0100)]
Bug 17973: Add the Koha::Checkout->item method
Test plan:
prove t/db_dependent/Koha/Checkouts.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Fri, 17 Feb 2017 12:10:15 +0000 (12:10 +0000)]
Bug 5784 - Undo link in breadcrumbs
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 23 Jan 2017 15:57:54 +0000 (15:57 +0000)]
Bug 17972 - Reformat acquisitions sidebar menu with acquisitions and administration sections
This patch makes changes to acquisitions-menu.inc so that the style
matches that of the Administration and Tools sidebar menus. The links
are now divided up between Acquisitions (/acqui/) and Administration
(/admin/). The link-highlighting JavaScript used elsewhere has been
added.
To test, apply the patch and view the Acquisitions home page.
- Check that the "Acquisitions home" link is highlighted (bold).
- Test the other Acquisitions links to confirm that highlighting works.
- Click any link in the Administration section of the sidebar menu.
- Confirm that everything looks correct and works correctly.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 16 Jan 2017 13:46:26 +0000 (14:46 +0100)]
Bug 17959 - Add the Koha::Notice::Message[s] packages (message_queue table)
This just add Koha::Notice::Message[s] for later uses.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 23 Jan 2017 11:35:13 +0000 (12:35 +0100)]
Bug 17958: Add tests for Koha::Notice::Template[s]
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 16 Jan 2017 13:10:09 +0000 (14:10 +0100)]
Bug 17958: Add Koha::Notice::Template[s] packages (letter table)
This just add Koha::Letter[s] for later uses.
Test plan:
prove t/db_dependent/Koha/Notices.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 16 Jan 2017 13:10:22 +0000 (14:10 +0100)]
Bug 17962: Add Koha::Tmp::Order[s]
These packages should not be used outside the TT syntax scope.
A rewrite of Koha::Acquisition::Order[s] should be considered instead.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 16 Jan 2017 12:25:31 +0000 (13:25 +0100)]
Bug 17962: TT syntax for notices - Prove that ACQ_NOTIF_ON_RECEIV is compatible
To make ACQ_NOTIF_ON_RECEIV TT compatible, we need to expose data from
the aqorders table. We already have a package for it in the Koha
namespace but it is based on Koha::Object[s].
The other path creates dummy Koha::Tmp::Order[s] packages to make it
usable. Of course we should use a valid Koha::Acquisition::Order[s]
based on Koha::Object, but it's outside the scope of this bug report.
This notice template is quite simple, and it's a good one to start.
From C4::Acq::NotifyOrderUsers, GetPreparedLetter is called with 4
elements: the library, the patron to notify, the biblio and the order
information.
Note that prior to this patch aqorders was filled from GetOrder, which
retrieved a lot of information from the acquisition table (aqbasket,
aqbookseller). The idea with the TT syntax is to access the data from
where it really exists. So if a user wants to display the basket name,
[% order.basket.basketname %] should be used instead.
Note that this will not work at the moment, the basket method is not
defined in the order package.
However the basic template should work as before.
The test added to TemplateToolkit proves that.
Test plan:
Use the default ACQ_NOTIF_ON_RECEIV to notify a patron that an order has
been received.
That generated template should be exactly the same as prior to this
patch.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 23 Jan 2017 10:40:48 +0000 (11:40 +0100)]
Bug 17950: Merge.t: Improve variable handling at top level
This patch does:
[1] Remove unused $dbh.
[2] Move all mocking statements to one sub.
[3] Promote a few lexicals to globals when used in the subtests.
Test plan:
Run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>