Jonathan Druart [Fri, 26 Sep 2014 15:14:00 +0000 (17:14 +0200)]
Bug 5342: (qa-followup) FIX some issues
this patch:
- reintroduces the ISSN column
- fix a wording (already there before the main patch)
- fix the tests if a serial was already in late
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small change: Removed 2 tabs in claims.tt and fixed order
of ISSN/Issue number column descriptions as they were switched.
Note: The <order> tags are currently not stripped out of the
notice.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 29 Aug 2014 10:47:50 +0000 (12:47 +0200)]
Bug 5342: Serial claiming improvements: add a counter
This patch adds a new DB field serial.claims_count
This field already exists for late orders. It makes sense to introduce
it for serial.
Test plan:
0/
a) Does not apply the patch.
b) Remove all your claimissues notices and be sure you have some serial issues
in late.
c) remove email address for the vendor you will use.
d) remove email address for the logged in user.
e) Export claims using the csv export => The selected issues will be
marked as claimed.
f) logout/login (to update the email address).
1/ Apply the patch and execute the updatedb entry.
2/ Go on the Serials > Claims page
3/ Verify that you get a warning message 'No claimissue notice defined'
4/ Verify the vendor list is correct (with the number of serial in late.
You should not get any changes here.
5/ Select one vendor and verify that the issue which was claimed before
has a claim count set to 1.
6/ Verify that you are not able to send notification to the vendor.
7/ Create a claimissue notice.
Something like:
<<LibrarianFirstname>>
<<LibrarianSurname>>
The following issues are in late:
<order><<biblio.title>>, <<biblio.author>> (<<biblio.serial>>)</order>
8/ Go on the Serials > Claims page, the warning message does not appear
anymore.
9/ Select issues. Select a notice. And "Send notification".
You should get an error (no email defined for this vendor).
10/ Add an email for the vendor.
11/ Select issues. Select a notice. And "Send notification".
You should get an error (no email defined for your user).
12/ Add an email address to your user
logout/login
13/ Select issues. Select a notice. And "Send notification".
You should get a happy message: the email has been sent!
14/ The email will contain the order tags if bug 12851 is not
pushed/applied.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, some small issues fixed in a follow-up.
Note: If you change the email address of your staff user, you will
have to log out and back in to make the change take effect.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11990 - Holds ratio report (circ/reserveratios.pl) sorts numeric values as text
This patch makes columns Holds, Items and "Hold ratio" to sort
numerically instead of lexicographically. Also changes default sorting
column from "Holds" to "Hold ratio" because this is a hold ratios
-report, not hold count report.
Also cleans up an excess aoColumn -definition, because aoColumns ==
aoColumnDefs without target operator. No point in defining columns
twice.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 15 Oct 2014 18:39:06 +0000 (14:39 -0400)]
Bug 13083 - Hard-coded " by " in opac-tags.pl
The OPAC's list of a logged-in user's tagged titles displays title and
author, which for some reason are combined in the script into one
variable. I can't see any reason to do it this way.
This patch modifies the script so that title and author are passed as
separate variables. In addition, subtitle is now passed as well.
To test you must log into the OPAC as a user who has tagged multiple
titles, at least one of which should have an author and at least one
with a subtitle. View the list of tagged titles and confirm that this
information is being displayed correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
simith [Wed, 6 Aug 2014 13:11:47 +0000 (09:11 -0400)]
Bug 8837: Dewey cn_sort inaccurate
This patch fix the cn_sort sorting accurace described by Joy Nelson.
Testing:
I) Appy the bug 12424 patch
Before applying this patch:
0) Select 3 items.
1) Edit the items selected
2) Change "Full call number" option to 971/P23w/v.1-2/pt.8, 971.01/P23w/v.1-2/pt.6-7 and 971.01/P23w/v.1-2/pt.7
3) Save changes
4) Valide 971P23WV_12PT_8_000000000000000, 971_000000000000000_01P23WV_12PT_67 and 971_01P23WV_12PT_700000000000000 (table items - cn_sort column).
After applying this patch:
5) Edit again the item selected in 0
3) Save changes
4) Valide 971_000000000000000_P23W_V_12_PT_8, 971_010000000000000_P23W_V_12_PT_67, 971_010000000000000_P23W_V_12_PT_7 (table items - cn_sort column).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 18 Jul 2014 10:48:57 +0000 (12:48 +0200)]
Bug 11007: Drop column aqorders.cancelledby
It seems that this column has never been used.
Test plan:
1/ Execute the updatedatabase entry.
2/ git grep cancelledby should not return occurrence in the code (except
in Koha/Schema/*
3/ prove t/db_dependent/Acquisition.t should return green.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I couldn't find any trace of this column being used.
Passes tests and QA script, updates all necessary files.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 14 Jul 2014 13:50:32 +0000 (09:50 -0400)]
Bug 12571 - Add ability to customize SIP2 screen messages
We should add the ability to apply a regular expression to screen
messages for the SIP2 server. This would allow libraries to not only
customize the screen messages the patron sees, but can also allow screen
messages to be translated.
Test Plan:
1) Apply this patch
2) Inspect etc/SIPconfig.xml, note the new screen_msg_regex tags
that can be nested inside a given login tag.
3) Add one or more screen_msg_regex tags to your own SIP config
Recommendation: s/Greetings from Koha./Welcome to your library!/g
4) Restart your SIP2 server
5) Test with a SIP2 machine, or use /misc/sip_cli_emulator.pl
6) Note your new AF fields!
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11068: Update MARC21 es-ES default frameworks fields and translation
Rebased on top of Bug 3977
This patch updates the Spanish default frameworks for bibliographic records
and authorities using the files created from the po files on Pootle.
To test:
- Run the web installer, make sure all mandatory data is selected
- Verify there are no SQL errors
- Check cataloguing behaves normally
- Check adding authorities behaves normally
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Trusting Bernardo and Tomas as native speakers to get the Spanish right.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 10 Oct 2014 20:47:32 +0000 (22:47 +0200)]
Bug 12844: Force the symbol place in the tests
Looking with Katrin at the default configuration of Number::Format, she
has the p_cs_precedes value set to 0 (put the symbol at the end) and
p_sep_by_sep set to 1.
Now it is possible to sent these values to the format subroutine.
On this way, the tests can force them in order to pass on all configuration.
This default value for this variable certainly depends on the locales.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 16 Sep 2014 07:49:40 +0000 (09:49 +0200)]
Bug 12844: FIX import package missing
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 28 Aug 2014 14:20:27 +0000 (16:20 +0200)]
Bug 12844: Use Koha::Number::Price where it can be useful
This patch use the new module into pl and tt script.
Note that we could use it in the acqui/pdfformat/layout*.pm files.
Test plan:
1/ Verify that the acquisition home page displayes the prices as before.
2/ Verify that the budgets page displayes the prices as before.
3/ Verify that the funds page displayes the prices as before.
4/ Verify that the planning page displayes the prices as before. (Note
that 1 price is now formatted: 'Fund remaining').
5/ Create an order from a staged file. This stage file should contain a
formatted price.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 28 Aug 2014 14:20:18 +0000 (16:20 +0200)]
Bug 12844: Remove the C4::Output::FormatNumber subroutine
This subroutine is now useless.
Test plan:
git grep FormatNumber
should not return any result in pl and pm files.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 28 Aug 2014 14:19:17 +0000 (16:19 +0200)]
Bug 12844: New module to manage prices into Koha
This patch introduces a new module to manage prices into Koha and
especially the acquisition module.
How to use is:
1/ You can use it in a perl script/module:
my $price = Koha::Number::Price->new(3);
$price->format; # Will display 3.00 (or 3,00 depending on the CurrencyFormat syspref).
$price->format({with_symbol => 1}); # Will display €3.00 (or [$]3,00 depending on the CurrencyFormat syspref).
2/ But this module is usefull to display the price from a template file.
[% my_price | Price %]
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 14 Oct 2014 17:52:33 +0000 (13:52 -0400)]
Bug 13080 - Addition of noEnterSubmit class should not apply to textarea, only to input
The application of the "noEnterSubmit" class to textareas in the
cataloging editor prevents the user from being able to use the Enter key
to create line breaks. This is not intentional and should be corrected.
This patch adds more specific scoping to the relevant JavaScript.
To test, apply the patch and clear your browser cache if necessary. Open
up the MARC editor and locate a tag which uses a textarea for entry. Try
typing lines of text separated by line breaks. The enter key should work
correctly.
Signed-off-by: bondiurbano costalc@gmail.com Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and fixes the problem.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mathieu Saby [Wed, 20 Aug 2014 14:24:49 +0000 (16:24 +0200)]
Bug 9828 : Followup for Queryparser and deletion of useless 6XX$9
This followup
- changes some indexes in Queryparser configuration file
- supresses some clearly useless 6XX$9 in biblio-koha-indexdefs.xml and adds 2 new ones, probably useless (not sure of that)
- change the name of index Subject-geographical to Subject-name-geographical in ccl.properties (to match bib1.att)
the xsl file zebradb/marc_defs/unimarc/biblios/biblio-zebra-indexdefs.xsl was generated with the following command:
xsltproc zebradb/xsl/koha-indexdefs-to-zebra.xsl zebradb/marc_defs/unimarc/biblios/biblio-koha-indexdefs.xml > zebradb/marc_defs/unimarc/biblios/biblio-zebra-indexdefs.xsl
To test :
1) Apply the 3 patches
2) copy the modified files from the source directory to the directory where you store the config files for Zebra and Queryparser
The files modified by the 3 patches and that need to be copied are:
etc/zebradb/biblios/etc/bib1.att
etc/zebradb/ccl.properties
etc/searchengine/queryparser.yaml
etc/zebradb/ccl.properties
.../unimarc/biblios/biblio-koha-indexdefs.xml
.../unimarc/biblios/biblio-zebra-indexdefs.xsl
3) Rebuild Zebra
4) Create a record A with some values in critical fields, for example:
- the string "test9828" in 600$c 600$f 600$p, 602$f, 616$c, 616$f, 606$2,600$2
- the string "subform" in 600$j
4) Create a record B with the string "subgeo" in 606$y
5) Create a record C with the string "subdate" in 606$z
WITHOUT QP activated in sysprefs ("Don't try to use QP"):
6) try to search "su:test9828". You should have no results
7) try to search "su-genre:subform". You should have 1 result : record A
8) try to search "su-geo:subgeo". You should have 1 result : record B
9) try to search "su-chrono:subdate". You should have 1 result : record C
10) on existing records, try su-ut, su-to, su-na, su-form, su-corp, su-geo indexes, and see it results are relevant
WITH QP activated in sysprefs:
Same tests
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mathieu Saby [Mon, 18 Aug 2014 20:51:01 +0000 (22:51 +0200)]
ug 9828 : Add and fix comments in UNIMARC biblio-koha-indexdefs.xml
Only cosmetic :
- the references to lines record.abs are now useless and outdated
- some comments added in record.abs could be usefull in biblio-koha-indexdefs.xml
No change expected, only comments
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mathieu Saby [Sat, 16 Mar 2013 18:47:20 +0000 (19:47 +0100)]
Bug 9828: More specific indexing of UNIMARC 6XX fields
[New commit on 18 Aug 2014 : rebased, and DOM indexing only]
Issues to fix :
Most of 6XX may contain a $2 that identifies the system used for indexing. It should not be indexed.
In French libraries, $2 contains "rameau". So searching books about the music composer "Rameau" retreive thousands of records!
For some 6XX fiels, other subfields should not be indexed, for example dates of persons and family, or adresses.
In Unimarc guide, 600$t,601$t,602$t are said to exist but to be "not used". I keep them indexed.
Additionnally, subject indexing could be improved by using specific indexes for each 6XX if possible :
In ccl.properties :
- su-to, su-geo and su-ut are defined as aliases of Subject.
- a specific index is defined, but not used in record.abs : Subject-name-personal, alias su-na
We can use these indexes and create new specific indexes by using existing bib1 attributes.
We could also index $j,$x,$y,$z subdivision in specific indexes.
This patch does the following changes :
1) For all 6XX : Not indexing $2 (LSCH, Rameau...), $3 and $5
2) Suppressing the indexing of some specific subfields, depending on the field:
600 : Personal name used as a subject // see Marc21 600
not indexing c (additional elements),f (dates),p (address/affiliation)
602 : Family name used as a subject // see Marc21 600 3X
not indexing f (dates)
616 : Trademark
not indexing c,f
3) For all 6XX : index $j,$x,$y,$z in several indexes in addition to the specfific index for their 6XX field:
4) Define in ccl.properties some specific indexes :
Subject-name-conference 1=1073 => alias su-conf
Subject-name-corporate 1=1074 => alias su-corp
Subject-genre-form 1=1075 => alias su-genre and su-form
Subject-geographical 1=1076 => alias su-geo
Subject-chronological 1=1077 => alias su-chrono
Subject-title 1=1078 => alias su-ut and su-ti
Subject-topical 1=1079 => alias su-to
5) Adding new aliases in Search.pm :
su-chrono, su-form, su-genre, su-corp, su-conf, su-ti
6) Using these new indexes in for
600 : Subject and Subject-Personal-Name ; all subfields except subdivisions in Personal-name
601 : Subject, Subject-name-conference and Subject-name-corporate and Subject-name-conf ; all subfields except subdivisions in Corporate-name and Conference-name
602 : same as 600 but could be improved later
604 : Subject and Subject-title ; $a in Subject-Personal-Name ; all subfields except subdivisions in Name-and-Title
605 : Subject and Subject-title
606 : Subject and Subject-topical
607 : Subject and Subject-geographical ; all subfields except subdivisions in Name-geographic
608 : Subject and Subject-genre-form
To test :
A. In a UNIMARC-DOM indexing environment
1) Apply the patch
2) Rebuild zebra
3) Create a record A with some values in critical fields, for example:
- the string "test9828" in 600$c 600$f 600$p, 602$f, 616$c, 616$f, 606$2,600$2
- the string "subform" in 600$j
4) Create a record B with the string "subgeo" in 606$y
5) Create a record C with the string "subdate" in 606$z
6) try to search "su:test9828". You should have no results
7) try to search "su-genre:subform". You should have 1 result : record A
8) try to search "su-geo:subgeo". You should have 1 result : record B
9) try to search "su-chrono:subdate". You should have 1 result : record C
10) on existing records, try su-ut, su-to, su-na, su-form, su-corp, su-geo indexes, and see it results are relevant
Indexing of subjects could maybe be improved later
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
All seems to work as expected, I am not super-familiar with UNIMARC but I wonder if in su-corp and su-conf the subdivisions might be useful (e.g. France-Gendarmie / Staatsbibliothek-Berlin)
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Mon, 1 Sep 2014 21:06:25 +0000 (23:06 +0200)]
Bug 3977: MARC21 321$b has wrong description
Fixing descriptions in all frameworks for consistency.
Changed frameworks are:
- es-ES, default framework
- fr-FR, default and simple frameworks
- nb-NO, default and simple frameworks
- pl-PL, default and simple frameworks
To test:
- verify changes by reading them
- or verify by running the web installers of those languages
and checking the description appears correctly
- or verify by loading the sql files manually and check
they still load correctly
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch moves the treeview plugin in the staff client from the
language-specific lib/jquery/plugins directory to the one outside the
theme directory.
To test, apply the patch and view the "Set permissions" page for a
patron. The list of permissions should display in an expandable list as
usual.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
It works, following the test plan. I can see the jQuery treeview plugin moved
from 'prog' language specific directory to the global lib/plugins directory.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described. Found no other places where we use this plugin.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the 23 July development meeting it was decided to formally deprecate
GRS-1 indexing mode for Zebra. This patch makes code fallback to DOM
on the remaining places. No behaviour change should be noticed, as DOM
has been the default for a while.
Regards
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Also checked running Makefile.PL
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13088: Allow the user to specify a max amount of facets to show
This patch makes _get_facet_from_result_set rely on a new syspref (FacetsMaxCount)
to set the max facets to show for each facet category. It defaults to 20 if
the syspref is absent or empty.
To test:
- Have a search with lots of facet results (with some category showing the "See more" link).
- Jump to "See more", notice it shows more than 20 facet values.
- Apply the patch, reload the page.
=> SUCCESS It only shows 20 (default hardcoded value)
- Change the FacetsMaxCount syspref to other value (e.g. 15 or 100).
- Reload
=> SUCCESS: it shows the expected amount.
- Sign off :-D
Regards
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan completed successfully
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Passes tests and QA script, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13088: Add a syspref so the user can chose the amount of facets to show
This patch introduces a syspref (FacetMaxCount) that controls how many
facets to show for each category (e.g. Author).
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 21 Oct 2014 18:05:31 +0000 (14:05 -0400)]
Bug 13120 - Invalid HTML generated by MARC21slim2OPACResults.xsl
This patch converts an id to a class in order to avoid duplicate id
attributes on one page.
To test you must have XSLT enabled with the default setting. Perform a
search in the OPAC and confirm that the display of location looks
correct.
Run the resulting page through a validator using an in-browser tool like
Firefox's Html Validator addon or using the W3C's validator.w3.org. The
results should not complain of duplicate id attributes.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
OK for me. Obvious mistake: I can confirm FF HTML validator reports it, and
stop reporting it after applying this patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I can confirm this fix is correct.
Also, I found that jQuery doesn't like repeated ids in some cases
so this will make customizing easier.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Wed, 22 Oct 2014 04:18:27 +0000 (00:18 -0400)]
Bug 13128 - Add span with id for logged in branch name, add hidden span for branchcode
It would be nice if there were a simple way to access the name and
branchcode of the currently logged in library, as well as the logged in
user via JavaScript ( via intranetuserjs ).
I propose the following:
1) Remove the whitespace surrounding the loggedinusername span
2) Wrap the logged in branch name with a span that has an id
3) Add the branchcode in a hidden span that has an id
Test Plan:
1) Apply this patch
2) Log into Koha
3) Inspect the html source code
4) Note the lack of whitespace within the tag <span class="loggedinusername">[% loggedinusername %]</span>
5) Note the logged in branch name is now surrounded by a span with an id
6) Note below that is a span containing the branchcode, also with an id.
7) Verify the branchcode span is hidden by default.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13140: Add a notice on the About page about GRS-1 deprecated
This patch changes the text for zebra_auth_index_mode and zebra_bib_index_mode
entries missing on koha-conf.xml telling the user GRS-1 is deprecated.
It also adds another check for those preferences set to GRS-1, and shows a
warning message if set to grs1.
To test:
- Apply the patch and try all combinations:
- zebra_auth_index_mode and zebra_bib_index_mode missing
- zebra_auth_index_mode and zebra_bib_index_mode set to grs1
- Sign off :-D
Regards
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I've played with the 3 related koha-conf.xml file parameters:
zebra_auth_index_moda, zebra_bib_index_mode missing, and use_zebra_facets.
Inconsitencies are properly reported in About page thanks to this patch. It
would be helpfull to admin upgrading their Koha installation.
And by the way, thanks Tomas for the new Zebra facets functionnality. It's a
'joy' to see it into Koha.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The /svc endpoint allows you to create and update biblio records.
This patch extends it so that it is also possible to delete a biblio.
Test plan
* Create a new biblio by sending a POST request to /svc/new_bib with a
marcxml record as request body. Note the biblionumber it gets assigned.
* Make some changes to the marcxml record, and update it by sending
a POST request to /svc/bib/{bibilonumber}
* Observe that the changes are persisted on the biblio record.
* Now delete the bilblio by sending a DELETE request to
/svc/bib/{biblionumber}
* Observe that the biblio is indeed gone from the db.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described and passes tests and QA script.
I tested using curl for a record with and one without items:
curl -X DELETE 'http://localhost:8080/cgi-bin/koha/svc/bib/2' --cookie /tmp/svc.cookies
<?xml version='1.0' standalone='yes'?>
<response>
<error>This Biblio has items attached, please delete them first before deleting this biblio </error>
</response>
Bug 12871 - wthdrawn instead of withdrawn in ILSDI
Bug 10550 as renamed items.wthdrawn into items.withdrawn.
This change was missing in ILSDI/Services.pm
Test plan :
Test ILSDI webservice GetAvailability on a item with items.withdrawn > 0.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes what seems to be the last occurence of wthdrawn.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12900: (consistency followup) add buildBiblioDefaultViewURL to MARC21 XSLT
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, tested in UNIMARC and MARC21.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12900: IntranetBiblioDefaultView doesn't do anything with NORMARC or UNIMARC XSLT
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Thu, 23 Oct 2014 18:26:39 +0000 (14:26 -0400)]
Bug 13138: Remove jQuery plugins which were used by Solr
This patch removes two jQuery plugins which were used only by
Solr-related templates. With the removal of Solr these plugins are
obsolete.
To test, search the Koha code for references to the two plugins:
jquery.textarea-expander.js
tablednd.js
There should be none.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Couldn't find any references. Also passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Mon, 11 Aug 2014 22:18:47 +0000 (10:18 +1200)]
Bug 9530 Making changes to misc/cronjobs/runreport.pl
Note: mail from this doesnt work in current master, so you may not
be able to test this fully
To Test
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Test sending a mail from scheduled reports, note you will need to have the fix
for 12031 applied
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Mon, 11 Aug 2014 22:21:32 +0000 (10:21 +1200)]
Bug 9530 making changes to virtualshelves/sendshelf.pl
To Test
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Send a list from the staff client
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Mon, 11 Aug 2014 22:19:39 +0000 (10:19 +1200)]
Bug 9530 making changes to opac/opac-sendshelf.pl
To Test
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Send a list from the public (OPAC) interface
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Mon, 11 Aug 2014 22:19:14 +0000 (10:19 +1200)]
Bug 9530 making changes to opac/opac-sendbasket.pl
To Test
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Send a cart from the public site (OPAC)
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Mon, 11 Aug 2014 22:18:12 +0000 (10:18 +1200)]
Bug 9530 making changes to basket/sendbasket.pl
To Test
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Test some mails, test sending a cart email from the staff client
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Mon, 11 Aug 2014 21:54:48 +0000 (09:54 +1200)]
Bug 9530: Making changes to C4::Letters
So notices using it (circulation, holds etc) will now use the new behaviour
To test:
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Test some mails, a circulation alert, an acquisitions claim, or a newly created borrower alert
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Mon, 11 Aug 2014 21:57:06 +0000 (09:57 +1200)]
Bug 9350: Making changes so that you can add the new fields to branches
To test
1/ Apply patch
2/ Add or Edit a branch, filling out the new fields
3/ Check that the changes saved
http://bugs.koha-community.org/show_bug.cgi?id=9530 Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Mon, 11 Aug 2014 21:53:44 +0000 (09:53 +1200)]
Bug 9530: Adding a new Koha::Email module
To test
1/ Apply patch
2/ run t/Koha_Email.t
No changes to behaviour have been implemented yet
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Wed, 28 May 2014 00:12:00 +0000 (12:12 +1200)]
Bug 9530: Adding sysprefs and making changes to the branch table
To allow for separate Reply To and From email addresses for notices
This patch will make no functional changes, it just sets up the db
changes needed.
To Test:
Apply patch, upgrade DB, make sure everything still works fine
(Or wait to test with following patches)
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Mon, 4 Aug 2014 08:56:34 +0000 (10:56 +0200)]
Bug 12031: [QA Follow-up] Undefined routine and change to koha-conf.xml
[1] Routine add_cron_job was added in 2007 but has not been defined.
Parameter Recurring is not used.
[2] Made some changes to koha-conf.xml. Instead of an example to edit,
I replaced it by the SCRIPT_NONDEV_DIR install variable.
[3] SCRIPT_NONDEV_DIR had to be included in rewrite-config.pl and the
path had to be corrected for dev installs in Makefile.PL
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested single and dev install for supportdir change.
Compared installations with and without the patches for this report.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Liz Rea [Thu, 10 Jul 2014 00:08:40 +0000 (12:08 +1200)]
Bug 12031: (QA followup) adding supportdir to koha-conf.xml
By adding a supportdir, this allows for configuring use in a
non-package install environment, such as git.
Seeing as I only tested git, I clearly had this defined.
Further testing should include packaging up an installation, and
installing a package version without setting the supportdir
configuration value.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Liz Rea [Thu, 3 Apr 2014 01:49:16 +0000 (14:49 +1300)]
Bug 12031: Task Scheduler not sending mail
At some stage the runreport.pl cronjob was changed to accept longopts, but the scheduler script wasn't changed along with it. This patch fixes the mismatch.
To test:
1. make sure that your user is not in at.deny, and (if applicable/necessary) is in at.allow
1.5 test this on a package install, sending mails will still not work for git installs, even with this patch.
Useful, but not required step: make sure email can be sent from your server, also helpful is access to the Koha user's mail box (to see the bounce messages)
2. create a saved sql report to run
3. Go to Tools -> Task Scheduler and schedule a job to be run, and results emailed to you
4. note that you do not (without the patch) get an email. Make a note of the command it reports it is going to run.
5. apply the patch
6. schedule another job, you will notice that the command to run the scheduled job is slightly changed compared to the one in step 4.
7. Receiving an email when your job runs means the patch worked. Seeing --format= and --to= in the command also means the patch worked, as this is the command that runreport.pl is expecting.
8. Run the koha QA test tool.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: The line that changes is visible in the bottom section,
"Jobs already entered", with the corrected parameters and
path used. If you do not have the <supportdir> config
parameter set up in koha-conf.xml, it defaults to the
typical package path. If you have the parameter set up,
the path given matches what you tell it. Only tested in
git.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 8 Oct 2014 14:06:34 +0000 (10:06 -0400)]
Bug 13042 - Move budget action links into menu
The series of links in the "actions" column of the budgets
administration summary table are not very readable as they are, all
strung together: Edit Delete Duplicate Close Add fund.
This patch moves the links into an "Actions" menu, similar to the change
made by Bug 10615 in Reports.
To test you should have multiple active and inactive budgets. Apply the
patch and go to Administration -> Budgets. Confirm that each menu item
links to the correct action. Test the menu for both active and inactive
budgets.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Nice improvement on template level, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Thu, 9 Oct 2014 08:23:31 +0000 (10:23 +0200)]
Bug 11945: SQL syntax error in delete_expired_opac_registrations.pl
This patch corrects a syntax error, adds some comments to the usage
instructions and adds a count of the removed borrowers (with verbose
flag on).
Note that this is a dangerous script. It will delete your patrons
in patron category PatronSelfRegistrationDefaultCategory.
If you do not use this as a temporary category, you should NOT run this
script.
Test plan:
Check PatronSelfRegistrationDefaultCategory.
Check PatronSelfRegistrationExpireTemporaryAccountsDelay.
Based on these two settings, check the number of patrons to be deleted (date
enrolled should be before NOW minus the delay).
Backup your data and run the script.
Check the number of deleted borrowers.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 23 Jan 2013 15:05:22 +0000 (10:05 -0500)]
Bug 2969 - Report Name should be mandatory for saved reports
This patch re-implements the database changes from the original patch
and adds an update for existing reports. It also reimplements the
client-side validation using the new built-in validation plugin and adds
coverage for SQL reports.
I have also added the "required" attribute to the SQL report textarea
since saving a report with no SQL triggers an error.
To test:
- Create a new guided report. Confirm that you cannot save your guided
report without a report name.
- Create or edit a saved SQL report. Confirm that you cannot save your
report without a name or without SQL.
- Confirm that the saved_sql table structure has been updated.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Functional tests pass, database tables look correct to me.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Even with JS disabled, the form can not be submitted without the
report name filled in.
However we are not checking this server side .. if this was the public
interface that would be a fail. I will leave this up to the RM to
decided if client side checks are ok for this. Bearing in mind we
weren't handling any sql errors properly server side before this.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: description of the updatedb entry
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Robin Sheat [Wed, 22 Oct 2014 22:13:32 +0000 (11:13 +1300)]
Bug 13131 - remove Solr config file
This file should have been removed as part of Bug 12538.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13087: Add a notice for use_zebra_facets problems in about page
This patch adds two checks to about.pl:
- use_zebra_facets entry presence in koha-conf.xml
- use_zebra_facets==1 and zebra_bib_index_mode==dom
The idea is to alert the user if it has conflicting or wrong settings. Even
if there's a fallback to a working configuration.
To test:
- On clean master install, go to the about page
=> SUCCESS: No warnings regarding use_zebra_facets
- Comment out the use_zebra_facets entry, reload
=> SUCCESS: The about page mentions the use_zebra_facets entry is missing
- Uncomment the use_zebra_facets entry, make sure it is set to 1
- Change zebra_bib_index_mode to 'grs1', reload
=> SUCCESS: The about page says zebra_bib_index_mode is not set to DOM even though
you have use_zebra_facets set.
- Sign off :-D
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Followed test plan with success
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested by changing the koha-conf.xml file.
Note: There is no warning if use_zebra_facets is 0.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mason James [Mon, 29 Sep 2014 11:08:59 +0000 (00:08 +1300)]
Bug 11362 - increase zebra AUTH register sizes, from 4G to 20G
To test...
- apply patch
- build and install a new Koha .deb from patched codebase
- create a new Koha instance
- add some authority records to instance
- do a full zebra reindex
- do an authorities search, and get some results
note: this patch does not fix existing Koha instances, just new ones Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Paul Poulain [Fri, 10 Oct 2014 13:40:47 +0000 (15:40 +0200)]
Bug 11586 follow-up, FA framework update
This follow-up also improves the FA framework, removing some fields that should not be in FA
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Paul Poulain [Fri, 10 Oct 2014 13:07:41 +0000 (15:07 +0200)]
Bug 11586 follow-up
* itemtype = a mix was made between 099$t (biblioitems level) and 995$r (items level).
I've chosen 099$t (manual change still possible for librarians that want it)
* the 616$z is mistakenly displayed in tab 0. Switched to 6
* field "abimé" (995$1) activated, it's better
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 29 Sep 2014 10:36:33 +0000 (12:36 +0200)]
Bug 11586: Better default framework for UNIMARC - zebra conf
This patch updates the Zebra configuration for unimarc.
995$d and 995$j should not be indexed.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 29 Sep 2014 10:18:29 +0000 (12:18 +0200)]
Bug 11586: Better default framework for UNIMARC - AV
This patch updates the authorised_values.sql file.
New WITHDRAWN and RESTRICTED.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 29 Sep 2014 10:08:03 +0000 (12:08 +0200)]
Bug 11586: Better default framework for UNIMARC - authority
This patch updates the framework for authorities (unimarc_complet only).
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 29 Sep 2014 09:24:25 +0000 (11:24 +0200)]
Bug 11586: Better default framework for UNIMARC - framework
This patch updates the framework_DEFAULT.sql for unimarc_complet.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Wed, 15 Oct 2014 14:35:58 +0000 (16:35 +0200)]
Bug 13084 [Master] - Mixup of columns in deletedborrowers
I could reproduce this problem in 3.14.4 where I wrote the patch.
Fields shifted like branchcode moved to B_phone.
Could not reproduce it for master.
But this code change seems to improve things on master too.
TEST PLAN
---------
1) Alter the order of your deletedborrowers table.
e.g. alter table deletedborrowers change column privacy privacy int(11) after city;
2) Apply the 3.14.x test patch.
3) prove -v t/db_dependent/Members.t
-- Will fail on the new test.
4) Apply the 3.14.x code change patch.
5) prove -v t/db_dependent/Members.t
-- Will succeed on the new test.
6) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Wed, 15 Oct 2014 22:18:46 +0000 (18:18 -0400)]
Bug 13084 [Master] - Improve t/db_dependent/Members.t test coverage
Added a MoveMemberToDeleted set of tests.
TEST PLAN
---------
1) prove -v t/db_dependent/Members.t
-- all should pass.
2) Run koha QA tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 22 Oct 2014 13:19:58 +0000 (09:19 -0400)]
Bug 11926 [Follow-up] HEA - Render community koha statistic usages
This follow-up makes some language and spelling corrections to the
system preference descriptions. I have updated the preferences heading
to read "Share anonymous usage statistics" in order to emphasize the
anonymous aspect.
I have also updated the main preference name from "UsageStatsShare" to
"UsageStats" so that it is alphabetized first in the list of
"UsageStats*" preferences. I think this will make it clearer to the Koha
administrator what feature they are configuring.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 6 Oct 2014 21:42:19 +0000 (23:42 +0200)]
Bug 11926: DB changes
This patch adds the syspref in the database.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 4 Sep 2014 14:18:38 +0000 (16:18 +0200)]
Bug 11926: Add the items table
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 4 Sep 2014 09:49:27 +0000 (11:49 +0200)]
Bug 11926: Add new sysprefs and fix encoding issues
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 4 Sep 2014 09:32:43 +0000 (11:32 +0200)]
Bug 11926: Add a cronjob
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Julian Maurice [Fri, 14 Mar 2014 15:04:14 +0000 (16:04 +0100)]
Bug 11926: URI-encode data sent to statistics server
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Paul Poulain [Fri, 14 Mar 2014 11:39:08 +0000 (12:39 +0100)]
Bug 11926: Package updates
* POD doc
* hardcoding hea.koha-community.org as the URL where the stats must
be sent
* fixing some typos
* adding all sysprefs we want to upload.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Alex Arnaud [Wed, 12 Mar 2014 08:07:06 +0000 (09:07 +0100)]
Bug 11926: Render community koha statistic usages
Goals:
- Collecting Koha usage statistics
- Rendering stats on a community website
- Having a big bicture of how koha is used
3 parts in the project:
- this patch in koha
- hea-ws which collects data
- hea-app which renders data
Installation:
1/ Fill systempreferences:
UsageStatsLastUpdateTime UsageStatsID UsageStatsShare UsageStatsLibraryName
2/ Setup a cron in your crontab (ex: at 3:00 every first of the month):
0 3 1 * * export KOHA_CONF=/home/koha/etc/koha-conf.xml; export PERL5LIB=/home/koha/src; perl /home/koha/src/C4/UsageStats.pm
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
David Cook [Wed, 18 Jun 2014 03:45:31 +0000 (13:45 +1000)]
Bug 9368 [ALTERNATE] - specific behavior of yr and acqdate indexes
This patch fixes the "Publication date" and "Acquisition date"
searches when using non-QueryParser and QueryParser searches.
It adds structure attributes to the template, which is consistent
with how phrase searching is currently handled.
It removes unnecessary code from Search.pm, adds some necessary
code which is consistent with existing code, and adds a lot of
explanatory comments.
_TEST PLAN_
Before applying:
0) Turn off QueryParser
1) Try a "Publication date" or "Acquisition date" search from the
staff client advanced search.
2) Note that even though the description on the result page makes
it seem like you're doing an index-specific search, you're actually
doing a keyword search. You can verify this by checking the 008
from positions 7 to 10 for "Publication date" or "Date accessioned"
on items for "Acquisition date".
3) Turn on QueryParser
4) Try doing the searches from Step 1.
5) A "Publication date" search should probably produce zero results
After applying patch:
6) Keep QueryParser on
7) Try doing the searches from Step 1.
8) Notice that you're actually getting results consistent with
your search (ie the 008/7-10 shows the date you searched for,
and there is a "Date accessioned" in items which matches your
search)
9) Turn off QueryParser
10) Note that your results are exactly the same as step 8
(N.B. this is because QueryParser is falling back to non-QP mode
instead of producing a bad query.)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Fri, 17 Oct 2014 12:39:19 +0000 (08:39 -0400)]
Bug 13104 - Changing date or time format on a production server will create duplicate fines!
The system preference TimeFormat decides if times are formatted in 24
hour or 12 hour format. The issue at hand is that this changes the time
description for fines. Let us assume the time format is currently 24
hour, and there are overdue items with accruing fines. When the format
is changed to 12 hour, and fines.pl is run, it will begin looking for
fines with a 12 hour format. Since there are no, it will create a new
fine and you will now have two fines for the same item!
There are solutions which require database manipulation:
1) Update all existing fines from 24 hour to 12 hour format
2) Delete all existing accruing fines so they are all regenerated the
following night
The same situation applies to DateFormat.
The accounts rewrite ( Bug 6427 ) will resolve this issue, as it does
not look for existing fines based on the description.
I believe the best course of action until bug 6427 is pushed to master
is to add a warning to the system preference to not alter it on a
production server with existing fines.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds some documentation to warn about the problem.
Tested the new addition shows up in po files.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Thu, 9 Oct 2014 16:03:01 +0000 (05:03 +1300)]
Bug 12005 : Creating a new zebra connection for each time we need one
Zebra is not designed to have persistent connections, under cgi this
didn't matter the scripts would get a new connection each time, but
under plack we try to use dead connections
This patch changes it so plack works the same way that cgi did.
To test:
Apply this patch
Do some searches
Check everything still works
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Stéphane Delaune [Wed, 20 Mar 2013 09:54:46 +0000 (10:54 +0100)]
Bug 9859: fix nsb_clean side effect
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
This sub was causing 2 bugs :
- tools/exports.pl --clean was removing Â
- authority search plugin used in cataloging was removing  in suggested authorities displayed dynamicly (using ajax)
After applying the patch,
- NSB/NSE are still removed by nsb_clean
- tools/exports.pl --clean is no more removing Â
- authority search plugins is no more removing Â
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Fri, 21 Feb 2014 14:44:21 +0000 (09:44 -0500)]
Bug 11812 - Add missing "required" indicator to fields which are required
Form fields in the staff client which are required should be configured
to be so by doing several things:
- Add a class "required" to the field's <label>
- Add a class "required" to the form field
- Add 'required="required"' to the form field
- Apppend a <span class="required">Required</span> after the form field.
Several places in the templates are missing the <span>. This patch adds
them.
To test, apply the patch and view the following pages to confirm that
the "Required" text appears:
- Acquisitions -> Add an order to a basket from a new (empty) record.
Title, quantity, and fund should indicate they are required.
- Administration -> Authority types -> New authority type. The
authority type and description fields should indicate they are
required.
- Administration -> Authority types -> MARC structure -> New tag. The
tag field should indicate it is required.
- Patron types and categories -> New category. Category code,
description, and category type should indicate that they are required.
FIXME: Enrollment period is required but the user must choose one. I'm
not sure how to handle that clearly.
- Tools -> CSV profiles. Profile name, profile type, and profile MARC
fields should indicate they are required on both the new and edit
forms.
- Administration -> Manage MARC modification templates. Under "Create a
new template" the name field should indicate that it is required.
- Tools -> Batch patron modification -> Submit a batch for editing. Any
fields which are required according to your BorrowerMandatoryField
system preference should indicate that they are required.
Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch>
QA Edits: Re-worded the "required" not on the batch patron edit form,
added a missing word to the help text on that page. On the csv-profiles
page I removed an unnecessary "javascript:" protocol from the markup.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works and passes QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Stéphane Delaune [Wed, 15 Oct 2014 13:23:35 +0000 (15:23 +0200)]
Bug 13085: bugfix to allow call of export.pl in commandline without id_list_file parameter
Test plan
1/ run ./tools/export.pl
2/ notice an error like cannot open 0: No such file or directory at ./tools/export.pl line 209.
3/ apply patch
4/ run again
5/ no errors
Signed-off-by: Chris <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, adding an additional check.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 20 Oct 2014 05:56:46 +0000 (01:56 -0400)]
Bug 13115 - Holidays.t will fail some unit tests on Sundays
Due to the fact that Sunday is a repeating holiday in the example data
which is used for part but not all of Holidays.t, the last test will
fail on Sundays. The test is to see if today is *not* a special holiday
for MPL, but since it's already a repeating holiday, is_holiday will
return true rather than false.
Test Plan:
1) Wait until Sunday
2) prove t/db_dependent/Holidays.t
3) Note the failure
4) Apply this patch
5) Repeat step 2
6) Note there is no longer a failure
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Used my time machine... :)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Mon, 20 Oct 2014 13:04:45 +0000 (13:04 +0000)]
Bug 13114: Prevent Shibboleth Patches from spamming logs
- The shibboleth patch introduced an undefined message into the error
logs, when shiboleth is disabled.
Testplan
1. Ensure shibboleth is disabled.
2. Refresh any opac page
3. See 'Use of uninitialized value $ENV{"REMOTE_USER"} in string ne at
/home/koha/kohaclone/C4/Auth.pm line 711.' popup in the opac-error.log
4. Apply patch
5. Refresh opac page
6. Error should no longer appear
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 30 Sep 2014 14:34:57 +0000 (10:34 -0400)]
Bug 10960 - Holds Queue Report display loc code not description
The holds queue report shows codes for item shelving location and for
library transfer location. This patch adds template plugin handling of
both these fields to display their full description.
To test, make sure you have one or more items in your holds queue which
have a shelving location. Rebuild your holds queue if necessary and view
it. Items which have a shelving location should show the description
instead of the code. The "send to" column should show the library name
instead of code.
Signed-off-by: Chris <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, making use of the TT plugins.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12068 - label-create-pdf.pl Add support for RTL language
On top of Bug 8375
If you print a label using arabic/hebrew script,
letters are printed in logical direction, from left
to right, giving a mangled result
This patch will try to fix those cases adding a new
perl dependency, Text::Bidi, and using the automagic
feature if it's log2vis() function to rearrange chars
based on detected text 'direction'
To test:
1. Install Text::Bidi package
(apt-get install libtext-bidi-perl)
2. Try a batch, using Helvetica, with a mix of
ltr and rtl (arabic/hebrew) titles, chars are good,
but direction is bad
NOTE: I suggest changing the mapping for 'HO' font
on koha-conf.xml, from DejaVuSans-Oblique.ttf to
DejaVuSans.ttf to view 'title' chars
3. Apply the patch
4. Try again, now the result is good
Formerly a followup of Bug 8375, look sample pics
on that Bug.
Rebased following changes on Bug 8375
Note: Arabic titles will not be displayed, because
current code selects Oblique variant (unless you
change mapping as suggested on 2. )
Hebrew looks good.
Rebased and move use of new dependency to Labels.pm
Rebased on master
Signed-off-by: Karam Qubsi <karamqubsi@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with the help of Bernardo. With the patch
the characters of RTL strings appear in the correct
order in the generated PDF files.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Sat, 13 Sep 2014 10:52:08 +0000 (12:52 +0200)]
Bug 12914 - Wrong message 'Patron(..) is blocked for 2014-09-30 day(s).
The message in circulation.tt assumed to get days but date is given. Updated comments and message depending on expiration date or no expiration of restriction.
The message shows up on top of Bug 643 Allow override of 'debarred' status if a patron has a restriction.
Replaced date_format with date template (see comment #6)
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 8687 - Overdues: Add utf-8 support to HTML and additional fields to CSV output
This patch contains small improvements made in the overdue_notices.pl script.
- UTF-8 support in the HTML output
- Add the phone, cardnumber, branchname and letternumber columns
to the csv output
Testing:
I) Create an issue overdue (intranet):
0) Enter in a patron account, add some characters like
ユーザー別サイト in his address
1) Check if in Patron category administration the overdue column
is YES for his code
2) In Tools -> Notice triggers define first delay = 7, letter
Overdue notice. Nothing for second ni third
3) Check if Tools -> Notices and slips, code overdue is available
4) checkout a book with a retard more than 7 days.
5) Check if Adminstration -> Defining circulation and fine rules
for all libraries has fine rules for his patron category,
item type book.
II) Before applying the patch
0) Run misc/cronjobs/overdue_notices.pl -n -html .
1) Open the file notices_"date".html in a brower
2) Validate the characters are not correct
III) After applying the patch
0) Run misc/cronjobs/overdue_notices.pl -n -html .
1) Open the file notices_"date".html in a brower
2) Validate the characters are correct
3) Run misc/cronjobs/overdue_notices.pl -n -csv temp.csv
4) Validate phone, cardnumber, branchname and letternumber
columns and values
Sponsored-by: CCSR Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Added the Sponsored-by line.
Rafal Kopaczka [Tue, 7 Oct 2014 12:43:36 +0000 (14:43 +0200)]
Bug 13035: Overdue notices send notices for due date in future.
Overdue notices, script uses method days_between which returns always
positive value of days, no mater if due_date is higher or lower from
date_to_run. This causes overdue notices to be send for real overdue and
for checkouts with due date in future, which have same days_between as
in notice triggers.
To reproduce:
1. Set up overdue notice triggers for eg. 2 day.
2. Checkout items for 2 borrowers first gets item with due date 2 days
in past and second gets 2 days in future.
3. run ./misc/cronjobs/overdue_notices.pl -n -t
4. watch that notices was generated for both of them.
To test:
1. Repeat steps 1,2
2. Apply patch
3. run ./misc/cronjobs/overdue_notices.pl -n -t
4. should be 1 notice for borrower with overdue item.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, just adds an additional test.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Wed, 1 Oct 2014 12:25:02 +0000 (08:25 -0400)]
Bug 13020 - Checkouts table default ordering is incorrect
The checkouts table is no longer keeping "today's checkouts" in the
order they were scanned.
Test Plan:
1) Create 3 records "Test 1", "Test 2" and "Test 3" each with one item
2) Check out the items to a patron in the order "Test 2", "Test 1", "Test 3".
3) Note the order is incorrect.
4) Apply this patch
5) Refresh the page
6) Note the order is now correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Note that the bug already exists before bug 12550. I checked on a 3.14.x
branch (without the ajax circ stuff), and the order is the same as with
this patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
projects / koha.git / log