]> git.koha-community.org Git - koha.git/log
koha.git
11 years agoBug 10541: enable cross-browser AJAX in additem.js
David Cook [Fri, 5 Jul 2013 02:00:36 +0000 (12:00 +1000)]
Bug 10541: enable cross-browser AJAX in additem.js

Currently, the additem.js is using "indexOf" to search
for a value in an array. While this works in Chrome, Firefox,
and IE > 9, it fails miserably in IE 8 and 7 (which don't have
the indexOf method). This means that users aren't able to add
items using the acquisitions module!

Instead of using "indexOf", we should be using the jQuery function
$.inArray. It was added in jQuery v1.2 (3.8.0 uses v1.3.2 so even
our oldest supported release can use this method). It's perfectly
cross-browser compatible...works in Chrome, Firefox, and every
version of IE that I've tried (i.e. 7, 8, 9).

Test Plan:

Before applying patch:

0) Switch to Internet Explorer 7, or 8, or 9, or 10.

If you're using IE 9 or 10, you'll need to change the Document Mode to
IE7 standards or IE8 standards.

You can do this by opening Internet Explorer 9 or 10, pressing F12 (or
clicking on the gear in the top right corner and choosing
F12 Developer Tools), and then clicking on "Document Mode" on the
top toolbar. There, you can change to IE7 or IE8 standards.

N.B. This is not always a perfect emulation in every case, but this
time it does show you the bug.

1) Set the system preference AcqCreateItem to "receiving an order"
2) Go to Acquisitions
3) Either:
    a) Receive a shipment for a basket with items
    b) Create a new basket, create an order, close the basket, and
       then do 3a)
4) In the "Item" fieldset, fill out some fields such as barcode,
   Date acquiried, Public note, etc.
5) Click "Add" at the bottom of the fieldset
6) Note that while the item may have been added, the "Item" fieldset
is not being shown again. You may also notice a Javascript error
appearing in a pop-up window or you might see a yellow warning flag
on the bottom status bar.

APPLY THE PATCH

7) Do a full refresh of the page (hold down shift and press the refresh
button on the browser next to the address bar), and try adding items
again.
8) Note that you receive no warnings and that items are added correctly
as they would be in Firefox or Chrome.

OPTIONALLY

9) To be sure that I haven't broken anything, go through the same steps
in IE9 (with IE9 standards) or Chrome or Firefox. Everything should be
working.

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested in IE10 in IE7 mode and IE9 mode. Also tested in Firefox.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 53f82b1d7d9b7f06da1032faf0800d624eb4c1d3)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 9362: fix query that finds upcoming due loans
Fridolyn SOMERS [Tue, 9 Jul 2013 15:38:04 +0000 (17:38 +0200)]
Bug 9362: fix query that finds upcoming due loans

C4:Circulation:GetUpcomingDueIssues is used in the advance_notices.pl
script.  This patch corrects an error in its handling of the maxdays
parameter that resulted in it picking up *all* upcoming due loans and
recently overdue loans.

Test plan :
- Create an issue with a date due in the paste
- Create an issue with a date due in two days
- Launch advance notices with due date in max 2 days : perl misc/cronjobs/advance_notices.pl -c -n -v -m=2
=> You get a warn "found 0 issues"
- Launch advance notices with due date in max 3 days : perl misc/cronjobs/advance_notices.pl -c -n -v -m=3
=> You get a warn "found 1 issues"

Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
I did the following test :

- 1 book to check in 2 days
- 2 books to check in in the past

before applying the patch :

$perl ../misc/cronjobs/advance_notices.pl -c -n -v -m=2
getting upcoming due issues at ../misc/cronjobs/advance_notices.pl line 203.
found 1 issues at ../misc/cronjobs/advance_notices.pl line 205.

I changed the value of "-m" : 0, 1, 2, 3, 4
=> always 1 issue found (the book to check in in 2 days)

after applying the patch :

$perl ../misc/cronjobs/advance_notices.pl -c -n -v -m=2
found 0 issues
for m = 0, 1, 2 => 0 issues

$perl ../misc/cronjobs/advance_notices.pl -c -n -v -m=3
found 1 issues
for m = 3,4,5 => 1 issues (the book to check in in 2 days)

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ff7f37202949bb6d60cdf30de4e237e6b1de93eb)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10563: Fix broken 'Edit' link on check expiration page
Katrin Fischer [Wed, 10 Jul 2013 20:43:41 +0000 (22:43 +0200)]
Bug 10563: Fix broken 'Edit' link on check expiration page

This fixes the broken 'Edit' (subscription) link on the
check expiration page in serials.

To test:
- Add a subscription
- Go to the check expiration page
- Search for your subscription, use an expiration date in the
  far future
- Verify the edit link on the result list doesn't work right
  before applying the patch, but works after

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 81431fdc8654e95e9fea37c4de880e9cf6126b26)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 7019: fix sorting by return date in Circulation History
Fridolyn SOMERS [Thu, 11 Jul 2013 08:24:07 +0000 (10:24 +0200)]
Bug 7019: fix sorting by return date in Circulation History

The "return date" column sort is not using the date sort algorithm because it is
confused by the combination of date data and text data ("Checked out").

This patch adds the use of datatable "title-string" sort type.
With that, the date in ISO format are used for sorting and because
letters are before numbers, "Checked out" rows are more recent than any date.

Test plan :
- set dateformat syspref to "dd/mm/yyyy"
- Go to members/readingrec.pl for a borrower having a old issues and
checked out issues
=> Check that sort of "Return date" is correct.
For example :
With patch :
  20/01/2011
  06/03/2011
  20/03/2011
  Checked Out
Without patch :
  06/03/2011
  20/01/2011
  20/03/2011
  Checked Out
- Test also with dateformat syspref "mm/dd/yyyy"

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit dbd6befa5d0d52e5ff10b78deef4f839127e30db)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 5766 - Add configuration for excluding articles from DataTables sorting
Owen Leonard [Fri, 26 Apr 2013 20:18:05 +0000 (16:18 -0400)]
Bug 5766 - Add configuration for excluding articles from DataTables sorting

Client-side table sorting should exclude articles like "a," "an," and
"the" when sorting by title. This patch adds a custom sorting plugin for
use by DataTables and a configuration line to the DataTables string
configuration file which can be translated for any language.

As an example, this patch modifies the patron checkout history template
to use the new sort on the title column.

To test, apply the patch and clear your browser cache to ensure the
revised JavaScript file is loaded. Sort the table by title. Titles
should be sorted regardless of the presences of "a," "an", or "the" at
the beginning of the title.

Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and is a good improvement.
I have added German articles to the list for testing purposes
and it worked nicely.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 33054ce13afe8a0cb1cf5815bbfe3cd18cd8967d)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10127 : Printoverdues.sh should tar only pdf files
Sophie Meynieux [Fri, 26 Apr 2013 13:06:40 +0000 (15:06 +0200)]
Bug 10127 : Printoverdues.sh should tar only pdf files

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
From the bug report:
At the end of printoverdues.sh, an archive is generated
containing all files present in  directory given as parameter.
As archives are generated in this given directory, they
contain previously generated tar files, creating oversized files.
Only .pdf files should be archived

All tests and QA script pass.
Worked ok in my tests, only packign PDF in the given directory.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10669 - LiveDVD manager for 3.12 missing in about page
Tomas Cohen Arazi [Wed, 31 Jul 2013 20:38:01 +0000 (17:38 -0300)]
Bug 10669 - LiveDVD manager for 3.12 missing in about page

This fixes the error.

Regards
To+

Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoIncrement version for 3.12.3 release v3.12.03
Tomas Cohen Arazi [Sun, 28 Jul 2013 21:48:25 +0000 (18:48 -0300)]
Increment version for 3.12.3 release

11 years agoUpdate release notes for 3.12.3 release
Tomas Cohen Arazi [Sun, 28 Jul 2013 21:44:35 +0000 (18:44 -0300)]
Update release notes for 3.12.3 release

11 years agoTranslation updates for 3.12.3
Bernardo Gonzalez Kriegel [Sun, 28 Jul 2013 21:22:01 +0000 (18:22 -0300)]
Translation updates for 3.12.3

Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
(cherry picked from commit 303f1a6bc20e585b0042ce24ae92d7aed780e3de)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agomove Auth_ParseSearchHistoryCookie.t to db_dependent directory
Galen Charlton [Sun, 28 Jul 2013 19:42:51 +0000 (19:42 +0000)]
move Auth_ParseSearchHistoryCookie.t to db_dependent directory

The actual tests in this script are not dependent on the database,
but simply loading C4::Auth requires a valid(ish) koha-conf.xml
and database.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 882939825fda8cbe92f8507f8d0767ac9142c362)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agodo some validation of the KohaOpacRecentSearches cookie
Galen Charlton [Sun, 28 Jul 2013 02:48:44 +0000 (02:48 +0000)]
do some validation of the KohaOpacRecentSearches cookie

Add validation of the value of the KohaOpacRecentSearches.  In
particular, this patch avoids the generation of an internal server
error when the OPAC is presented with an old cookie that uses the
old Storable-based serialization.

This patch also moves parsing of the cookie value into a
new routine in C4::Auth, ParseSearchHistoryCookie, and adds
a test case.

To test (in conjunction with the previous patch):

Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:

- As an anonymous user, conduct a variety of searches,
  including ones that include non-ASCII characters
- Check the search history and verify that all searches
  are listed
- Apply this patch and the previous one.
- Do *not* clear the KohaOpacRecentSearches cookie
- Check the search history and verify that no searches
  are listed any more
- As an anonymous user, conduct a variety of searches,
  including ones that include non-ASCII characters
- Check the search history and verify that all searches
  are listed
- Log into the OPAC
- Verify that current and past searches are listed in
  search history.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 8ea810b03089c8d3e6aed9663d277e4b2cc23d55)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agouse JSON rather than Storable for the OPAC search history cookie
Galen Charlton [Thu, 25 Jul 2013 16:50:30 +0000 (16:50 +0000)]
use JSON rather than Storable for the OPAC search history cookie

To test:

Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:

- Clear the KohaOpacRecentSearches cookie
- As an anonymous user, conduct a variety of searches,
  including ones that include non-ASCII characters
- Check the search history and verified that all searches
  are listed
- Log into the OPAC
- Verify that current and past searches are listed in
  search history.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 076a6e244d6ef2bff5da4667ea7f9ed61c97b984)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10170: expose more managed staged MARC strings to translation
Galen Charlton [Mon, 20 May 2013 15:38:46 +0000 (08:38 -0700)]
Bug 10170: expose more managed staged MARC strings to translation

This commit makes it possible to translated the 'staged'
and 'error' record statuses as well as the 'auto_match'
overlay status.

Also takes out a bit of HTML cruft in one string that is
not needed for translation.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass. New strings are parsed into the po files:
"%s Always add items %s Add items only if matching bib was found %s Add items only if no matching bib was found %s Ignore items %s %s %s %s "
"%s No match %s Match applied %s Match found %s %s %s "
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7d990042e9dcc86e6f60b923763720d5c9ed6b2c)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10170: strings in MARC import made translatable
Adrien Saurat [Thu, 2 May 2013 14:56:54 +0000 (16:56 +0200)]
Bug 10170: strings in MARC import made translatable

Following bug 9215: non translatable strings are now
present in the template and translatable

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Not only does this make the strings translatable it makes the template
a lot easier to read
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 24e561f4da56e442dc1a9d25afa63e8ab74d9236)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10556: The delivery time is not inserted on adding a supplier.
Jonathan Druart [Tue, 9 Jul 2013 09:52:31 +0000 (11:52 +0200)]
Bug 10556: The delivery time is not inserted on adding a supplier.

Test plan:
Add/edit a supplier and check that the delivery time is set in DB.

Note: This patch cleans the code (sql query) in order to see easily if a
problem occurred.

Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit b95c3134a8a38ba430f7d70173f91e055b4fa30e)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agobug 10556: regression test for setting deliverytime when adding vendor
Galen Charlton [Tue, 16 Jul 2013 14:55:09 +0000 (14:55 +0000)]
bug 10556: regression test for setting deliverytime when adding vendor

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 41baeafda9733caa69cd678b3f471976c6b27a7c)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I'm loving Galen's regression tests :-D

11 years agoBug 10274: Execute sql queries into a transaction
Jonathan Druart [Fri, 5 Jul 2013 12:50:03 +0000 (14:50 +0200)]
Bug 10274: Execute sql queries into a transaction

Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit eab1812b7dcfb460378fb287a63c6a81b3c8d820)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10274: UT: Acquisition.t needs to create its own data
Jonathan Druart [Fri, 17 May 2013 13:11:35 +0000 (15:11 +0200)]
Bug 10274: UT: Acquisition.t needs to create its own data

Try before the patch:
prove t/db_dependent/Acquisition.t

And after, it should produce:
  t/db_dependent/Acquisition.t .. ok
  All tests successful.
  Files=1, Tests=41,  2 wallclock secs ( 0.03 usr  0.00 sys +  0.42 cusr
  0.02 csys =  0.47 CPU)
  Result: PASS

Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tests pass and the bookseller is deleted.

Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit f72e78f2bd4e3f208f38063f948365d9108e6d40)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fixed a small conflict, tests pass and looks fine.

11 years agoBug 10275: Use a transaction for OrderFromSubscription.t
Jonathan Druart [Mon, 1 Jul 2013 08:11:05 +0000 (10:11 +0200)]
Bug 10275: Use a transaction for OrderFromSubscription.t

Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 4f09ebfc8a4a04125777d6e90c36b73217bae888)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10275: UT: OrderFromSubscription.t needs to create its own data
Jonathan Druart [Fri, 17 May 2013 13:27:45 +0000 (15:27 +0200)]
Bug 10275: UT: OrderFromSubscription.t needs to create its own data

Try before the patch:
prove t/db_dependent/Acquisition/OrderFromSubscription.t

And after, it should produce:
  t/db_dependent/Acquisition/OrderFromSubscription.t .. ok
  All tests successful.
  Files=1, Tests=12,  2 wallclock secs ( 0.02 usr  0.00 sys +  0.46 cusr
  0.02 csys =  0.50 CPU)
  Result: PASS

And some warnings...

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests.
Assumes Dateformat is set to US dates as in the sample data.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 8e442955247e925dacf303455f40522a89a349b2)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10499: VirtualShelves.t - wrap tests in a database transaction
Kenza Zaki [Mon, 1 Jul 2013 08:48:03 +0000 (10:48 +0200)]
Bug 10499: VirtualShelves.t - wrap tests in a database transaction

Before this patch, the queries in VirtualShelves.t were committed in the
database and have to be removed at the end.

This patch wraps tests in a database transaction.

Test plan:
prove t/db_dependent/VirtualShelves.t
VirtualShelves.t .. ok
All tests successful.
Files=1, Tests=72,  1 wallclock secs ( 0.06 usr  0.00 sys +  0.72 cusr  0.06 csys =  0.84 CPU)
Result: PASS

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit d2a756128853e9d3a1e0b99f47a04c9e0f31de75)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10575 : GetOrdersByBiblionumber.t needs a database transaction
Kenza Zaki [Thu, 11 Jul 2013 14:28:11 +0000 (16:28 +0200)]
Bug 10575 : GetOrdersByBiblionumber.t needs a database transaction

Before this patch, the queries in GetOrdersByBiblionumber.t were commited in the database and have to be removed at the end.
This patch wraps tests in a database transaction.

Test Plan :
prove t/db_dependent/Acquisition/GetOrdersByBiblionumber.t
t/db_dependent/Acquisition/GetOrdersByBiblionumber.t .. ok
All tests successful.
Files=1, Tests=3,  0 wallclock secs ( 0.02 usr  0.01 sys +  0.37 cusr  0.05 csys =  0.45 CPU)
Result: PASS

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 45fafb31ce03244011513a3a758e28f8db9615a4)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10504: Remove the unused C4::Acq::ModOrderItem routine
Jonathan Druart [Tue, 25 Jun 2013 07:09:38 +0000 (09:09 +0200)]
Bug 10504: Remove the unused C4::Acq::ModOrderItem routine

This routine has been introduced by commit 2d90fb22d43db986547bbaa945873d6dd78aab71.
The only call has been removed by commit 9eba7dc594fc0d4698da5e791d5f6f8682b2712a.

So now, this routine is useless.

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 9f4f1ceafe218afcbc55d6dfb9ac1e32fc11803a)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10527: remove disused routine C4::Branch::get_branch_code_from_name
Jonathan Druart [Tue, 2 Jul 2013 10:56:21 +0000 (12:56 +0200)]
Bug 10527: remove disused routine C4::Branch::get_branch_code_from_name

This routine is not in used and does not make sense. It should not be
used later.

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, not references to get_branch_code_from_name found.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7d930649065663325de95c3f8ecdbcea3bddb3b5)

Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10422 - Remove references to unused and non-existent wizard.css
Owen Leonard [Tue, 2 Jul 2013 13:59:21 +0000 (09:59 -0400)]
Bug 10422 - Remove references to unused and non-existent wizard.css

doc-head-close.inc contains a reference to "wizard.css" which doesn't
exist. The option to include it never evaluates as true, and that
section can be removed from the template.

To test, apply the patch and view any page in the staff client.
Everything should be styled as before. A search of the Koha source
should return no references to "wizard.css" or a "wizard" variable.

Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
No occurrence of "wizard" in pl/pm files.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 986f7a24e8abe566d57a3488a8df87488ab3aeb6)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 6898: fix DB update that assigns the circulate/overdues_report permission
Fridolyn SOMERS [Wed, 5 Jun 2013 12:16:14 +0000 (14:16 +0200)]
Bug 6898: fix DB update that assigns the circulate/overdues_report permission

This patch fixes a bug that prevented the circulate/overdues_report
permission from being assigned to staff users during upgrade.  This
patch will not affect databases that are already running 3.12.x
or later.

Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This will only fix the permissions for updates done
after the patch has been applied. But I agree with
Fridolyn, that we can not safely update permissions for
existing installations.

Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit c6bf2670502afbd12981aa5e913779c38c19bdc4)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10189: Translate values in UNIMARC 128b/c cataloguing plugins to English
Mathieu Saby [Fri, 3 May 2013 21:07:37 +0000 (23:07 +0200)]
Bug 10189: Translate values in UNIMARC 128b/c cataloguing plugins to English

Cataloguing plugins for UNIMARC 128b and 128c fields are only in Ffrench.

This patch translates them.
Source : http://blue.lins.fju.edu.tw/mao/marc/unicon.htm
Note : 128b and 128c are deprecated in last version of UNIMARC Manual (field 145 used instread).
But they are still used in French Sudoc network.

To test : in a UNIMARC english Koha, edit a record and use 128b and 128c
cataloguing plugins. Check everything is in english.

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Thx for translating those!
Verified new strings get parsed into the po files.
Templates still contain lots of tabs, those can be fixed separately.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 80ea8bf821ba83fd4506f5298f5a582051b44e06)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10258: offer to create basket group only when staff user has correct permission
Galen Charlton [Mon, 17 Jun 2013 01:05:31 +0000 (18:05 -0700)]
Bug 10258: offer to create basket group only when staff user has correct permission

If the staff user does not have the group_manage acquisition permission,
do not offer to create a new basket group when closing an order basket.

This avoids a situation where if a staff member without that permission tries
to close a basket and chose the option to create a bakset group, they would
be redirected to the login page.

To test:

[1] Log in as a staff user that does not have
    the acquisition/group_manage permission.
[2] Create a new order basket, attach at least one
    order line to it, then close it.
[3] Verify that the confirmation page does not
    offer to create a basket group with the
    same name as the order basket.
[4] Log in as a staff user that has the
    acquisition/group_manage permission.
[5] Create and close an order basket.
[6] Verify that this time, the confirmation page
    *does* offer to create a basket group.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 14a1bd0e420fd895f989ba88e0cad927697b6173)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10258: fix permissions check for setting basket group for order basket
Galen Charlton [Thu, 13 Jun 2013 15:53:49 +0000 (08:53 -0700)]
Bug 10258: fix permissions check for setting basket group for order basket

Improve the code that displays and allows staff to
set the basket group from the basket details page
for a closed basket.

Prior to this patch, a staff member who did not
have the group_manage acquisition permission would
still see a control to change the group that the
basket belongs to; attempting to change the group
would present with with a login page.

This patch also does some tidying of how basket group
details are passed to the template.

To test:

[1] Create an order basket and close it.  Do
    not assign it to a basket group.
[2] View the basket details while logged in as
    a staff user who has the order_manage acquisitions
    permission but not the group_manage.  The
    displayed basket group should be "No group".
[3] Switch to a staff user who also has the
    group_manage permission, then view the basket
    details again.  The basket group field should
    now be a select input that allows you to change
    the basket group.
[4] Change the basket group.  Verify that the basket group
    you selected is now displayed as the current group
    for that order basket.  The basket group delivery and
    billing place fields should also now be displayed.
[5] Close the basket group set in the previous step, then
    view the basket details again.  This time, the basket
    group name should be displayed with a suffix of " (closed)",
    and no input to change the group should be displayed.
[6] Swith to a staff user who does not have the group_manage
    permission, view the basket details, and verify that
    the basket name is displayed with a suffix of " (closed)".

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 44364db8d53bf5e3135ae2de6270a920e5c053c1)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 9770: fix sorting of Dewey call numbers that contain prefixes
Jason Etheridge [Fri, 8 Mar 2013 15:41:06 +0000 (10:41 -0500)]
Bug 9770: fix sorting of Dewey call numbers that contain prefixes

C4::ClassSortRoutine::Dewey can pad the wrong part of a call number internally.

The subroutine get_class_sort_key tokenizes a call number string (splitting on
periods and whitespace) and counts the number of tokens that solely contain
digits.  If there is only one such digit group, a comment in the code states
that it will pad said digit group.  However, the bug is that the code assumes
said digit group is the first token, when this may not be the case.

In practice, this can cause poor sorting when used a call number is in the form
of PREFIX _space_ 3DIGITS.

To test:

[1] Create two item records whose class scheme is set to
    'ddc' (Dewey) and whose call numbers contain prefixes, e.g.,
    J DVD 700.1 ABC and J DVD 850 DEF.
[2] Use the inventory tool to produce a list of item items that include
    the two created in step 1.  Obsere that that items are sorted
    in the incorrect order, with "J DVD 850 DEF" coming before
    "J DVD 700.1 ABC".  Alternatively, run the following SQL
    to see the incorrect sort order:

    SELECT cn_sort, itemcallnumber
    FROM items
    WHERE itemcallnumber LIKE 'J DVD%'
    ORDER BY cn_sort;

[4] Apply this patch.
[5] Run misc/maintenance/touch_all_items.pl to force cn_sort to be
    recalculated.
[6] Repeat step 2 and verify that the call numbers are now sorted
    corrected.

Signed-off-by: Jason Etheridge <jason@esilibrary.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit dba36a7a1216238a260ea5fbe2218627487e9f19)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 9770: test case for sorting of Dewey call numbers that contain prefixes
Jason Etheridge [Fri, 21 Jun 2013 19:31:32 +0000 (15:31 -0400)]
Bug 9770: test case for sorting of Dewey call numbers that contain prefixes

This adds a test for C4::ClassSortRoutine::Dewey to check that the
call number "JR DVD 800.1" sorts before "JR DVD 900"

To test:

[1] Apply just this patch.
[1] Run prove -v t/ClassSortRoutine_Dewey.t
[2] Test #7 should fail.

Signed-off-by: Jason Etheridge <jason@esilibrary.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes test plan and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit bce45b4bf55e82345efed2850d9cb5fd77f3c483)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agobug 10356: improve display of serial issue dates in staff bib details page
Chris Hall [Fri, 22 Mar 2013 02:33:50 +0000 (15:33 +1300)]
bug 10356: improve display of serial issue dates in staff bib details page

This patch adds the date published to the subscriptions tab in the staff
interface bib display and renames the former "Date" column to
"Date arrived".

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 97bbf04757227f2a26a6f5b1b216d2bab8efbdc9)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Good and simple usability improvement. Works as expected.

11 years agoBug 10448: can now change framework after duplicating bib record
David Cook [Wed, 12 Jun 2013 01:24:09 +0000 (11:24 +1000)]
Bug 10448: can now change framework after duplicating bib record

Changing the framework in the MARC editor immediately after duplicating
a bib record no longer clears the fields.

This patch changes the Changefwk Javascript function so that it passes
the "op" value and the "biblionumberdata" (as the biblionumber) from
addbiblio.pl back to itself, when submitting the form in order to
change the framework.

The reason we need to do this is because the form in addbiblio.tt
is hard-coded to always submit an "op" value of "addbiblio". Currently,
we need to have it hard-coded to "addbiblio", because all the magic
happens in addbiblio.pl when there is an "op" of "addbiblio". If we
always passed the "actual" "op" value, such as "duplicate", nothing
would ever happen when we clicked "save". It seems to me that this
is a flaw in the design of addbiblio.pl.

If we pass the "op" and "biblionumber" when changing frameworks, we're
able to tell addbiblio.pl that we're still wanting to "duplicate" this
"X" biblionumber. However, by having the form still hard-coded to
"addbiblio", when we hit save, the form will do the magic, check if
it's a duplicate, and save the record (or prompt for action if it
is a duplicate).

--

I also noticed that if you make changes to a record, then change
the framework before saving, your changes get cleared (since the
original record from the database is loaded when the page reloads).
It seems to me that this is a bug. Changing the framework should
change the layout while preserving the content. I think most users
would assume that when changing the framework.

This patch also introduces another hidden input into addbiblio.tt and
the Changefwk Javascript called "changed_framework". Basically, if
the Changefwk Javascript is run, it tells addbiblio.pl that the
framework is changed, and it uses the posted data from the form
(which we have been modifying) instead of reloading the record from
the database.

--

Test Plan:

A) Before Applying Patch:

To Show That Changing the Framework Erases All Fields When
Duplicating a Record:

1) Go to any bib record
2) Go to Edit > Edit as new (duplicate). You should see filled
in fields.
3) Change the framework to any other framework than the one
that is currently specified.
4) Note that every single field is now blank

To Show That Changing the Record then Changing the Framework
Ignores Changes, When Editing a Record

5) Go to any bib record
6) Go to Edit.
7) Change the title of the record to "I've changed the title".
8) Change the framework to any other framework than the one that is currently specified.
9) Look at the title. You'll notice it is the original title, and NOT "I've changed the title".

B) Apply the Patch

Also, clear your memcache and shift+refresh your screen. You don't want to use cached templates/javascript.

C) After Applying the Patch

Repeat Steps 1-3 and 5-8.

You should now notice that changing the framework when duplicating the item does not clear all the fields.

You should also notice that any changes you make prior to changing the framework will still exist after changing it.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ca33b7fc635d93b3029831da7496372fb34c798f)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected.

11 years agoBug 7143: Updating history and about page
Chris Cormack [Sun, 7 Jul 2013 08:38:55 +0000 (20:38 +1200)]
Bug 7143: Updating history and about page

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit d647090a4ab9b53577c1959dcdb0642a29fcbe6d)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10514: improve visibility of Add item link on new order form
Owen Leonard [Thu, 11 Jul 2013 14:28:55 +0000 (10:28 -0400)]
Bug 10514: improve visibility of Add item link on new order form

This patch converts the "Add" and "Clear" links
to the standard "submit/cancel" format inside a fieldset. This gives
them a little more visual weight.

Based on the changes made by Liz Rea and Jonathan Druart.

To test:

- create a basket
- add a record to it
- scroll down - the link to add item and cancel should both be more
  prominent now.
- Click "Add item" - it should add an item.

Signed-off-by: Liz Rea <liz@catalyst.net.nz>
I still feel weird about the button, but as two people have said they'd rather have the button, I'm alright with it I guess.
Really what I want is people to notice it's there and click it at the appropriate time. I hope this will help that issue.

Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Leaves the translation problems, but that needs more work and is
out of the scope of this bug.
Tested Add and Update functionality works correctly.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 275f405c8b3920634907e5e1f2ef8ccecf497868)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoIncrement version for 3.12.2 release v3.12.02
Tomas Cohen Arazi [Mon, 22 Jul 2013 23:58:30 +0000 (20:58 -0300)]
Increment version for 3.12.2 release

11 years agoUpdate release notes for 3.12.2 release
Tomas Cohen Arazi [Mon, 22 Jul 2013 23:46:01 +0000 (20:46 -0300)]
Update release notes for 3.12.2 release

Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoTransation updates for 3.12.2
Bernardo Gonzalez Kriegel [Mon, 22 Jul 2013 21:50:18 +0000 (18:50 -0300)]
Transation updates for 3.12.2

Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 8911: DBRev 3.12.01.005
Tomas Cohen Arazi [Mon, 22 Jul 2013 14:59:31 +0000 (11:59 -0300)]
Bug 8911: DBRev 3.12.01.005

Advertise the users how to fix About Koha > Timeline for old instances.

Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 8911: make sure history.txt gets installed where history.txt can see it
Tomas Cohen Arazi [Tue, 2 Jul 2013 21:35:58 +0000 (18:35 -0300)]
Bug 8911: make sure history.txt gets installed where history.txt can see it

This patch makes Makefile.PL put the history.txt file in the right places
depending on the chosen setup layout, adds a reference to that place in
koha-conf.xml (and debian template version), and finally tweaks about.pl to
use it.

To test, apply the patch and verify that perl Makefile.PL runs fine, and
installing in
 - dev
 - single
 - standard
layouts works as expected. Then go to the about.pl page and see if Koha's
history shows there.

Then, build your packages and test on your newly created instances.

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 0fe3d053ffe0adc4fda4fdb660ed93203ecc02d8)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fixed a trivial conflict in Makefile.PL (course reserves are not in 3.12)

11 years agoBug 10411: add cache control headers for static resources (Debian package)
Robin Sheat [Wed, 5 Jun 2013 05:50:29 +0000 (17:50 +1200)]
Bug 10411: add cache control headers for static resources (Debian package)

This adds caching directives to the static resources so that the browser
doesn't ask about them all the time.

By default, Debian apache doesn't have the required module (mod_expires)
enabled, and so this patch will have no effect. In order to enable this
function, run:

a2enmod expires

and restart apache.

Test Plan:
* Using firebug or equivalent, load a page.
* Note that none of the images, css, or js files have a Cache-Control or
  Expires header set.
* Add this patch, redeploy the package with it (or overwrite the
  apache-share.conf file) enable the 'expires' module, restart apache.
* Force-reload the page
* Note that the images, css, js now have Cache-Control and Expires set
  for 12 hours into the future.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit be905428722522f1ace4e99d13ffcb5d11f65657)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10447: add 'ru' and 'uk' to Zebra indexing language list
Tomas Cohen Arazi [Tue, 11 Jun 2013 14:13:59 +0000 (11:13 -0300)]
Bug 10447: add 'ru' and 'uk' to Zebra indexing language list

This patch add the option to choose 'ru' and 'uk' during install for Zebra.
Should work for a tarball install, and make 'ru' and 'uk' available for using
with koha-create too.

Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reran Makefile.pl and made sure the language options show up now.
Patch extends existing language code lists addings nb, ru and uk
where missing.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 782e3251c043d3f3671e1eeff7b195939afd5db2)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10507: improve warning about duplicate patron attribute value
Colin Campbell [Tue, 9 Jul 2013 10:18:49 +0000 (11:18 +0100)]
Bug 10507: improve warning about duplicate patron attribute value

If a warning about a duplicated patron attribute is returned,
the value was being passed back for display in the warning
message with the same name as the variable in errors

As the message is displayed in the context of errors
the error value 1 was being displayed not the value
duplicated as intended.

Pass the value to the template with a unique name.

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I fixed another tiny typo while signing off: "is already in use" instead
of "is already is use."

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 2614e07e1e2e6386b5f91e65f127940072e54d4d)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10475 - Item form in acquisition not hiding subfields properly
Owen Leonard [Tue, 25 Jun 2013 16:46:04 +0000 (12:46 -0400)]
Bug 10475 - Item form in acquisition not hiding subfields properly

Subfields hidden in your ACQ framework leave a gap where they used to
be in the item entry form when adding an item to an order. This patch
makes the same change made by 7116 to services/itemrecorddisplay.tt to
correct the problem.

To test:

- Edit your ACQ framework and set some item subfields to hidden in the
  editor.
- Set your  AcqCreateItem system preference to "when placing an order."
- Add a title to an existing basket from an existing record.

The item entry form should display correctly with your hidden subfields
hidden. No whitespace should be left behind where the subfields were
hidden.

Also changed: Invalid "size" attributes on hidden form fields in
neworderempty.tt, stray </li>.

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, passes all tests and QA script.
Thx Owen!

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5e1f8caf609aa58eabf6f353d12ec25e0e8e23a0)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10529: Remove hardcoded dollar from patron message
Colin Campbell [Thu, 4 Jul 2013 11:21:45 +0000 (12:21 +0100)]
Bug 10529: Remove hardcoded dollar from patron message

The message fields which are returned in the SIP
Screen message field in a Patron Information response
had the dollar symbol hardcoded.

It would be possible to get the symbol from currency
but omitting any symbol would be consistent with the UI
and avoid problems with devices using weird encodings
for local currency symbols (e.g. the many variations
of UK Pound sign)

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ced4ca4e2d39856b4f00411eaee406b569199c1f)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10490: DBrev 3.12.01.004
Tomas Cohen Arazi [Tue, 16 Jul 2013 18:16:28 +0000 (15:16 -0300)]
Bug 10490: DBrev 3.12.01.004

Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10490: Overdue fines cap can't store decimal values
Katrin Fischer [Mon, 1 Jul 2013 19:58:57 +0000 (21:58 +0200)]
Bug 10490: Overdue fines cap can't store decimal values

When overduefinescap was added to the issuingrules the datatype
given was decimal. This translates in MySQL to decimal(10,0).
This doesn't allow you to store decimal values and therefore
values like 4.5 are saved as 5 in the database.

To test:

On a current installation:
1) Try to enter 4.5 as Overdue fines cap. Verify that the value
   is not correctly saved.
2) Apply patch and run database update.
3) Try adding/changing an issuing rule setting Overdue fines cap
   to 4.5 again.
4) Verify the value is saved correctly.

Create a new Koha installation from scratch:
1) Verify that the issuingrules table has been created correctly
   and that you can add/mofidy issuingrules correctly.

Because this bug can create data loss, the old database update
has also been changed to avoid this problem for people updating
at a later point in time. Checkout an older version of Koha
pre 3.09.00.027.

1) Run the database updates.
2) Verify again, that adding/modifying issuingrules works correctly.

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 16c57940441aac62c1c90538f3c7b7cd386e6d92)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10560: add regression test
Galen Charlton [Fri, 12 Jul 2013 14:57:11 +0000 (14:57 +0000)]
Bug 10560: add regression test

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit e2bb7af21666ca61f65fb3163d8449823f5cab4b)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10560: make it possible for default interface language to not be English
Robin Sheat [Fri, 30 Nov 2012 02:48:50 +0000 (15:48 +1300)]
Bug 10560: make it possible for default interface language to not be English

If you enable another translation, and disable English, then if you dont
have a cookie set, or your browser is not set to that language, you will
get English. So you can not disable English in either the staff client
or the OPAC.

This patch fixes the language selection to do the right thing.

To test you must have at least one other language installed besides
English. Apply the patch and disable the en translation. Koha should
fall back to one of the enabled translations.

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I added a patch description and test plan, missing from the
original patch.

Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I have tested with various combinations of activated languages
and have found no regression. If the cookie is set, the right
language is shown accordingly. Else the first language in the
list seems to be picked. It did never fall back to English
in my tests, when English was explicitly deactivated.

Passes all tests and QA script.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 38f596d48e19c8f7890caea7a6eb59b6174cf5fa)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as advertised.

11 years agoBug 10535: by default sort funds by name
Fridolyn SOMERS [Wed, 3 Jul 2013 12:24:23 +0000 (14:24 +0200)]
Bug 10535: by default sort funds by name

In parcels.pl, and other acquisition pages, the funds are not sorted
by name in combo-box.  With a great number of funds, it is difficult
to find one.

This patch adds a default value to $orderby arg of C4::Budgets::GetBudgets.

Test plan :
- Create a new fund with a name beginning with 'z' and set you as owner.
- Create a new fund with a name beginning with 'a' and set you as owner.
- Go to a vendor and click "Receive shipments"
- Look at fund combobox
=> Funds are sorted by name

Signed-off-by: Silvia Simonetti <s.simonetti@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
When testing make sure your funds would sort the other way
around when sorting by code instead of description.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit aa6cdb60a9ab2581ffef08796a349242d3d2ff66)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agobug 10548: fix count of missing required dependencies by koha_perl_deps.pl
Mark Tompsett [Sat, 6 Jul 2013 19:50:54 +0000 (15:50 -0400)]
bug 10548: fix count of missing required dependencies by koha_perl_deps.pl

To test:

[1] ./koha_perl_deps.pl -m -u

If you have nothing missing, uninstall an optional component.

[2] ./koha_perl_deps.pl -m -u

You should get a number missing of at least 1.

[3] ./koha_perl_deps.pl -m -u -r

You should get the same number, even though the output is less.

[4] Apply patch

[5] ./koha_perl_deps.pl -m -u

Same results as in step 2.

[6] ./koha_perl_deps.pl -m -u -r

The number should differ from the results in step 3.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 0134341d9a9883013b7eee3bdc84aa339e618bcc)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10496 - CCSR theme OPAC tabs to not show correct active state
Owen Leonard [Fri, 28 Jun 2013 18:11:48 +0000 (14:11 -0400)]
Bug 10496 - CCSR theme OPAC tabs to not show correct active state

When jQueryUI was updated in the CCSR theme the corresponding CSS
changes were not copied over at the same time, causing style problems
with jQueryUI widgets. This patch makes the necessary changes.

To test, apply the patch, clear your browser cache, and view any page
which uses jQueryUI tabs (advanced search, bibliographic detail page).
Tabs should look correct and correctly show which tab is active.

Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
CSS changes only.
Confirmed problem in CCSR OPAC templates.
Tested advanced search and detail pages in CCSR and prog.
In order to fully test advanced search I added location and
collection to AdvancedSearchTypes.
Also tested the branch tooltip as I spotted some CSS added for that.

Works beautifully, no problems found.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7010fd1d29fec8ba3b6a212943cae573b056d3f4)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 4907: make 'Organize by' filter in suggestions reflect selected option
Katrin Fischer [Mon, 1 Jul 2013 21:44:39 +0000 (23:44 +0200)]
Bug 4907: make 'Organize by' filter in suggestions reflect selected option

When using the 'Organize by' option to change the display of the
suggestions, the option is applied, but the pull down always jumps
back to the first entry 'Status'.

This patch fixes that.

To test:
- Try out all settings and verify that after the page reloads the selected
  option is applied to your suggestions and the pull down shows
  the option you selected.

Note: Until bug 10519 is properly fixed the tabs will not show
the correct descriptions, but the URL will show you the selected
option as parameter: displayby=acceptedby

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 60a4dffbb197fe92e7483b9e0dfcc19bc9b51664)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 5858 - Advertise the updated framework to upgrading users
Tomas Cohen Arazi [Tue, 16 Jul 2013 14:08:41 +0000 (11:08 -0300)]
Bug 5858 - Advertise the updated framework to upgrading users

Just that.

Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 5858: Followup for INSERT IGNOREs in marc21_framework_DEFAULT.sql
Marcel de Rooy [Sun, 7 Jul 2013 12:40:19 +0000 (14:40 +0200)]
Bug 5858: Followup for INSERT IGNOREs in marc21_framework_DEFAULT.sql

Changes 8 INSERTs into INSERT IGNOREs.
This allows current installs to benefit easier from the new tags/subfields.
Note that running with --force will not achieve the same! The multi-value
inserts will still be aborted, though execution continues.

Test plan:
Run the file or do a new install.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Ran the file on a current install manually.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit bf9eccfeb8069c1b258916c1916138b6317122da)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 5858: update default MARC21 framework to April 2013 revision
Bernardo Gonzalez Kriegel [Wed, 20 Mar 2013 00:25:20 +0000 (21:25 -0300)]
Bug 5858: update default MARC21 framework to April 2013 revision

Applies to new installs, although with the follow-up
patch, users can run the installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.sql
script through the mysql client to add new tag and
subfield entries.

To test:
1) Delete MARC21 default framework
2) Apply patch
3) Test that new default framework loads without problem

Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Run this file with and without this patch.
This patch adds 24 tags (338 vs 314) and 323 subfields (3951 vs 3628).
Verified that last QA comments were incorporated.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 45669b2566c889c7a73251cdb132c81cf5127117)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10289: (follow-up) don't set cardnumber for test patron
Galen Charlton [Mon, 8 Jul 2013 14:29:32 +0000 (14:29 +0000)]
Bug 10289: (follow-up) don't set cardnumber for test patron

Since the patron barcode is nullable, and since the tests using
the test patron don't care what the barcode is, don't set it.  This
avoids the tests failing if the test database happens to already
have a patron record with the hard-coded barcode that used
to be supplied.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7957dd2a06cd20997f50f49aa1b77e24589ae71c)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10289: (follow-up) wrap tests in transaction
Galen Charlton [Mon, 8 Jul 2013 14:27:14 +0000 (14:27 +0000)]
Bug 10289: (follow-up) wrap tests in transaction

Applying new standard method for handling tear-down
of test data.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 47cf3ec24ded468ca4b7b79c8b000b1bdb13d1a8)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10289: UT: Reserves.t needs to create its own data
Jonathan Druart [Mon, 20 May 2013 14:37:10 +0000 (16:37 +0200)]
Bug 10289: UT: Reserves.t needs to create its own data

Try before the patch:
prove t/db_dependent/Reserves.t

And after, it should produce:
  t/db_dependent/Reserves.t .. 1/4 #
  # Creating biblio instance for testing.
  # Creating item instance for testing.
  # Deleting item testing instance.
  # Deleting biblio testing instance.
  # Deleting borrower.
  t/db_dependent/Reserves.t .. ok
  All tests successful.
  Files=1, Tests=4,  1 wallclock secs ( 0.02 usr  0.01 sys +  0.39 cusr  0.02 csys =  0.44 CPU)
  Result: PASS

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 6e6c7608b7d9b13d3af8d2115659ef142adb1b01)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 9519: DBRev 3.12.01.002
Tomas Cohen Arazi [Tue, 16 Jul 2013 13:50:23 +0000 (10:50 -0300)]
Bug 9519: DBRev 3.12.01.002

Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 9519: fix code for Italian language search limiter
Sonia LEMAIRE [Wed, 3 Jul 2013 13:53:49 +0000 (15:53 +0200)]
Bug 9519: fix code for Italian language search limiter

'ind' rather than 'ita' was set as the ISO639-2 language
code for Italian in the fr-FR, it-IT, pl-PL, ru-RU, and uk-UA
installation SQL.

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I checked nb-NO and de-DE - language code there had already
been corrected.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 707733ed2992a5d612d22510174301d65d3d7c05)

Conflicts:

installer/data/mysql/updatedatabase.pl

Trivial merge conflict in the usual suspect, updatedatabase.pl

Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10384: fall back to normal authentication if LDAP server is not available
Fridolyn SOMERS [Fri, 31 May 2013 08:17:08 +0000 (10:17 +0200)]
Bug 10384: fall back to normal authentication if LDAP server is not available

This fixes a bug where, assuming LDAP authentication is enabled, if a user
tries to log in while the LDAP server is down, the following fatal error
is displayed:

Can't call method "bind" on an undefined value at C4/Auth_with_ldap.pm line 134, <DATA> line 558.

This patch catches this error to allow normal authentication when LDAP connexion fails.

Test plan :
- Configure LDAP connexion with a host not having LDAP. ie :
 <useldapserver>1</useldapserver>
 <ldapserver id="ldapserver">
    <hostname>localhost</hostname>
    <base>dc=test,dc=com</base>
    <user>cn=Manager,dc=test,dc=com</user>
    <pass>passwd</pass>
    <replicate>0</replicate>
    <update>0</update>
    <auth_by_bind>0</auth_by_bind>
    <mapping>
      <firstname    is="givenname"      ></firstname>
      <surname      is="sn"             ></surname>
      <branchcode   is="branch"         >MAIN</branchcode>
      <userid       is="uid"            ></userid>
      <password     is="userpassword"   ></password>
      <email        is="mail"           ></email>
      <categorycode is="employeetype"   >PT</categorycode>
    </mapping>
 </ldapserver>
- Try to connect with mysql user (defined in koha-conf.xml)
- Try to connect with a user defined in borrowers
You may try to connect with working LDAP connexion

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 96ac578960cb4f2c5a964b3ac7fa4f9ba676b95d)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 9533: batch item modification form now shows default field values only by request
Kyle M Hall [Wed, 17 Apr 2013 13:33:55 +0000 (09:33 -0400)]
Bug 9533: batch item modification form now shows default field values only by request

This patch makes the pre-population of the fields for the batch
item editor with the default values from the default framework
optional and off by default.

Test Plan:
1) Apply patch
2) Add default values for cost and replacement cost to the
   default framework.
3) Browse to Tools / Batch item modification
4) Choose a file, or entire some barcodes in the text area
5) Ensure that the 'Populate fields with default values from default
   framework' is *not* checked
6) Click 'Continue'
7) Observe that the fields for cost and replacement cost are blank
8) Click the 'back' button on your browser
9) Check the checkbox to enable the default value
10) Click 'Continue'
11) Observe that the fields for cost and replacement cost now contain
    the default values you assigned them in the default MARC framework

Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Switch works correctly, all tests and QA script pass.

Note: there is a bug with default values for all non text input
fields. Default values won't be applied for those fields as the
pull downs are not preselected correctly with the default values
defined in the framework.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 2d32ab38148f7d75412a36e928dea799717bc5fb)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 9113: fix handling of certain characters by item batch modification tool
Fridolyn SOMERS [Wed, 26 Jun 2013 15:52:40 +0000 (17:52 +0200)]
Bug 9113: fix handling of certain characters by item batch modification tool

If you're using the batch modification tool and entering a call number
like "E+ 123 ABC", the tool removes the + and puts a space in its place,
e.g., "E  123 ABC"

This is because the form is posted via Ajax by background-job-progressbar.js.
Values are URI-encoded using escape(), but this method does not escape some
characters: * @ - _ + . /

Also, "+" is considered as a space in a URI.

This patch replaces escape() by encodeURIComponent() which encodes every character.

Test plan :
Perform an items batch modification by setting '* @ - _ + . /' in a field
(notes for example) and see that all characters are saved correctly.

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 0397e7ea64c208c140d7178ed34c3bd4b266fcfb)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 5894: Display all titles when confirming copy of items from cart to list
Marc Veron [Fri, 14 Jun 2013 14:37:23 +0000 (16:37 +0200)]
Bug 5894: Display all titles when confirming copy of items from cart to list

Adds missing code that splits biblios before calling template.

To test:
- Add some items to cart
- Open cart, select some or all items
- Add to list; with patch, following window shold show something
  like "Add 3 items to a list:", followed by list of items

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit bed99a851646fd0c7a4c906dd9dfe60c485b40c6)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10346 - "Add multiple copies" should be labelled "Add multiple items"
Owen Leonard [Wed, 5 Jun 2013 18:03:51 +0000 (14:03 -0400)]
Bug 10346 - "Add multiple copies" should be labelled "Add multiple items"

The Koha interface standardizes on the term "item" instead of "copy," so
the "Add multiple copies" button would be more correctly labeled "Add
multiple items."

To test, view the add item screen for an existing or new record. You
should see a button labeled "Add multiple items."

Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 79df5211d6faff8ab31b46c815ed50c70093a057)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10428: undefined check in add additem.pl
Fridolyn SOMERS [Fri, 7 Jun 2013 08:17:54 +0000 (10:17 +0200)]
Bug 10428: undefined check in add additem.pl

In additem.pl, in the code that generates item form you find:

@values = $itemrecord->field($tag)->subfield($subtag) if ($itemrecord && defined($itemrecord->field($tag)->subfield($subtag)));

This patch adds the check of $itemrecord->field($tag) undef.
I did not found a way to test it because item tag is always defined
when editing an item, but it would be safer/prettier to add this check.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit e31b158245f4eff36decebf30c8a87c8cfebe472)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10029 - CAS authentication fails in OPAC reserve
Fridolyn SOMERS [Thu, 11 Apr 2013 14:46:23 +0000 (16:46 +0200)]
Bug 10029 - CAS authentication fails in OPAC reserve

If OPAC reserve page is accessed without being logged-in, login form is displayed as well as a CAS authentication link (if enabled). A click on this link will lead to CAS server but one comming back to Koha, page shows an error : "ERROR: No biblionumber received".
This is because CAS link only contains the query path "/cgi-bin/koha/opac-reserve.pl", not the query parameters.

This patch adds query parameters to URI sent to CAS.

Test plan :
- Enable CAS
- Go to opac without been logged-in
- Try to place hold on a record
=> You get to /cgi-bin/koha/opac-reserve.pl?biblionumber=XXX showing authentication page
=> Check that CAS link contains query param "biblionumber"
- Click on CAS link and log in
=> Check you return well logged-in to reserve page with biblionumber param

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I have followed the test plan as far as I could and the links
contain the biblionumber now, which they didn't before.
I couldn't check the CAS login, but my normal login worked
as expected.
All tests and the QA script pass.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 974ab561ef00e76e7329f61b016b5d6b3103dde7)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10510 - OPAC's renew selected link has glitchy icon
Owen Leonard [Wed, 26 Jun 2013 16:54:15 +0000 (12:54 -0400)]
Bug 10510 - OPAC's renew selected link has glitchy icon

The "renew selected" link on the list of a user's checkouts looks bad
because the next icon in the sprite shows through. This patch modifies
the sprite to give it proper spacing and corrects the CSS to accommodate
the change.

To test, apply the patch, clear your browser cache, and view the
following pages to confirm that the change works:

- With TagsEnabled and TagsInputOnList enabled, view a search results
  page when logged in and when not logged in. Tag links should be
  styled correctly.

- With OpacBrowseResults enabled, open the detail page for any record
  and click the "browse shelf" link. The "forward" and "back" arrows
  should be styled correctly.

- With OpacRenewalAllowed enabled, log in to the OPAC and view your
  checked out items. The "renew selected" and "renew all" links should
  look correct.

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Note: this will fix only the prog theme, but not the ccsr theme.
And it works perfectly.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 1a1658f020e482abdd35fc8afc04cfcbce91e046)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10497 - star ratings not showing right in ccsr detail
Owen Leonard [Fri, 28 Jun 2013 18:21:03 +0000 (14:21 -0400)]
Bug 10497 - star ratings not showing right in ccsr detail

Star ratings do not appear correctly in the CCSR theme because it lacks
the image sprite used to display them. This patch adds the required
file.

To test, apply the patch and view a search results set which includes
titles which have an existing rating. Ratings should appear correctly.

View a detail page for an title which has a rating, and add a rating to
a title which has no rating. Ratings should look correct and work
correctly.

Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass - including leaving a rating on the newly visible stars

Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
In order to test this, make sure you have set OpacStarRatings set
to 'results and details'.

The star images show up in OPAC results with the correct amount
of stars after applying the patch.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 2fccb14a806e9aad18cc9f75df39e09bd64830dd)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 6553 - Parentheses in Corporate author break tracings
Liz Rea [Thu, 9 May 2013 21:32:17 +0000 (09:32 +1200)]
Bug 6553 - Parentheses in Corporate author break tracings

To test:

If an author's name includes parentheses or other escape-characters, the tracing links
produced in the OPAC fail in XSLT mode.  This patch wraps the author names
in double-quotes, providing the necessary escapement.

Test plan:
- Create a new framework, delete Thesaurus from 100 and other fields
- Create a new record in this framework (or change an existing record to this framework)
- Add 100$a - use parentheses
- Check the search links in OPAC detail pages

Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
XSLT change adding quotes. Search now matches search in the intranet.
Passes all tests.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 41409f500edf495db114b2277f4916e5a737a0aa)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10484: serials-edit.pl not checking for barcode field before checking for barcode...
Kyle M Hall [Mon, 17 Jun 2013 16:28:13 +0000 (12:28 -0400)]
Bug 10484: serials-edit.pl not checking for barcode field before checking for barcode subfield

The script serials-edit.pl is not checking for the existence of the
barcode field before checking for barcode subfield for autoBarcode =
incremental. If the barcode field doesn't exist, the script dies with
errors.

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Checked that adding items on serial receive still works.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 9af08e4e2d2091de489633b3f1c4fb03fcf323cd)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10494: remove spurious warnings from the KohaBranchName plugin
Galen Charlton [Wed, 19 Jun 2013 15:52:56 +0000 (08:52 -0700)]
Bug 10494: remove spurious warnings from the KohaBranchName plugin

The KohaBranchName plugin now returns an empty string if
given a NULL (undefined) library code or a library code that
is not present in the database (e.g., the '__ANY__' placeholder
that purchase suggestions can use).

To test:

[1] Create a purchase suggestion, setting the library
    to 'Any'.  Create a second one setting the library to
    a specific one.
[2] Go to the suggestions overview page in the staff interface.
    When you do so, the Apache logs should contain a warning
    that looks like this:

[Wed Jun 19 07:13:06 2013] [error] [client 192.168.1.10] [Wed Jun 19 07:13:06 2013] suggestion.pl: Use of uninitialized value in concatenation (.) or string at /home/koha/koha-tmpl/intranet-tmpl/prog/en/modules/suggestion/suggestion.tt line 487., referer: http://koha-staff.metaquarry/cgi-bin/koha/acqui/acqui-home.pl

[3] Apply the patch.
[4] Refresh the suggestions overview page.  This time, there should be
    no new warning logged.
[5] Verify that the library names for the two pending suggestions
    created in step 1 are displayed correctly.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Also adds new tests!

Note: For the test plan to work you have to add the suggestion
from the intranet, as Any is not an available option in OPAC.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ad2c1b3b8f20b3060c9a3a35c21a0757c685cbec)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10494: test cases for the KohaBranchName plugin
Galen Charlton [Wed, 19 Jun 2013 15:47:34 +0000 (08:47 -0700)]
Bug 10494: test cases for the KohaBranchName plugin

To test, in a test database that has the sample branches
loaded, run

prove -v t/db_dependent/Koha_template_plugin_KohaBranchName.t

Note that this includes regression tests for the issues
reported in bug 10494; these won't pass without applying
the patch that fixes them.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 96320a786bac92418b08b5af4d2b68746627482b)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 8884: (follow-up) rearrange placement of the top-bar div in CCSR
Galen Charlton [Fri, 14 Jun 2013 22:55:02 +0000 (15:55 -0700)]
Bug 8884: (follow-up) rearrange placement of the top-bar div in CCSR

This patch makes it easier to avoid having the top bar
overlap other OPAC page content (particularly custom
header content set via the opacheader system preference).

This is done by moving the top-nav div outside of the
main doc3 div and adjusting the CSS accordingly.  Yes,
this does end up having top-nav.inc be included from
opac-bottom.inc, but it would require touching rather
more templates to have it be included immediately after
the <body> tag.

This patch also removes a duplicate instance of the
cmspan span.

To test:

[1] Change to the CCSR OPAC theme.
[2] Before applying the patch, open a set of OPAC
    pages (e.g., main page, user page, search results, bib
    details) in your web browser.
[3] Apply the patch, and open the same OPAC pages in separate
    tabs.  Comparing the pre- and post- version of each page
    to verify that the placement
[4] Add an OpAC header using the opacheader system preference.
[5] Verify that the header is displayed without overlapping
    the top bar.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 33c12cf39588aa022eacaa0bca403c373a6bf8d5)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 8884: opacheader is not in the header on CCSR
Jared Camins-Esakov [Mon, 20 May 2013 16:55:17 +0000 (12:55 -0400)]
Bug 8884: opacheader is not in the header on CCSR

In CCSR the opacheader preference isn't really in the header it's to the
right of the search box (see attached). I'm okay with a customizable
region over there, but we should have a new preference for that and
header should be above the search box as it implies.

To test:
1) Put something in the OpacHeader syspref. Preferably something large
   and header-like for maximum effect.
2) Select CCSR theme.
3) View OPAC. Notice placement of "header" content.
4) Apply patch.
5) View OPAC. Notice placement of "header" content.
6) Sign off.

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised with one caveat; the content of
opacheader is by default underneath the div "top-bar". A couple breaks
in my OpacHeader test made it visible, so I'm going to assume this is a
styling issue and not a bug as such.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 905292b6328bbc847b1b932fc15dfef9e9845295)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10386: improvements to VirtualShelves.t
Marcel de Rooy [Mon, 3 Jun 2013 13:27:50 +0000 (15:27 +0200)]
Bug 10386: improvements to VirtualShelves.t

Most important: Does no longer delete all shelves!
Checks if there are ten borrowers for testing. But even works without them :)
When creating or modifying lists, takes name clashes into consideration.

Small change to _CheckShelfName in VirtualShelves module. Making it possible to
check a name for a list whose owner has been set to NULL. Note that a test
like field=? with undef for placeholder will not work in MySql.

Test plan:
How do you test a test? Well, you could run it on various databases..
But for real hacking, you could also add some debug lines.
I tested this by forcing 10 undefs in @borrowernumbers.
And by overwriting the return value of randomname with an existing name.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 93e87ca0b61611fc35238bf13eb226f477cf9c4e)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10336: HoldsQueue.t needs to create its own data
Jonathan Druart [Fri, 24 May 2013 14:18:59 +0000 (16:18 +0200)]
Bug 10336: HoldsQueue.t needs to create its own data

After applying this patch and the patch submitted in bug 10495, you can
run prove t/db_dependent/HoldsQueue.t and admire that all tests pass.

This patch creates a borrower and uses Koha routines instead of directly
updating the database.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit bfbc646fdd9ca4b90a0bc2751d0faa95d9e93ba1)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agobug 10495: set precondition for HoldsQueue test
Galen Charlton [Wed, 19 Jun 2013 17:30:58 +0000 (10:30 -0700)]
bug 10495: set precondition for HoldsQueue test

t/db_dependent/HoldsQueue.t assumed, but did not check,
that the AutomaticItemReturns system preference was off
at the beginning of the test un.  This patch makes sure
that that assumption is met.

To test:

[1] Make sure that at least one item is on loan (this is
    another assumption that the test case makes, one
    that should be corrected with the work proposed
    for bug 10336.
[2] Turn the AutomaticItemReturn system preference on.
[3] Run the test:

prove -v t/db_dependent/HoldsQueue.t

[4] Tests 4 and 6 should fail.
[5] Apply the patch.
[6] Run the test case again; this time, all tests should pass.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 4e51ec5aae50c878bbdca6994361b12d7ba20d0a)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 7110: Renewal messages no longer displays in OPAC if OpacRenewalAllowed is disabled
Owen Leonard [Tue, 27 Nov 2012 16:16:14 +0000 (11:16 -0500)]
Bug 7110: Renewal messages no longer displays in OPAC if OpacRenewalAllowed is disabled

Prior to this patch, if a patron has fines which exceed the limit set by
OPACFineNoRenewals but OPAC renewals are disallowed by OpacRenewalAllowed,
a message was displayed in their OPAC summary like this:

"Please note: You currently owe XXX in fines. Please pay your fines if you wish
to renew your books."

Information about outstanding fines in this case has no bearing on
how the user sees his summary of checkouts; since the user cannot
renew the loans from the OPAC regardless of their fine balance if
OpacRenewalAllowed is not enabled, this patch removes the message.

To test, try various combinations of OpacRenewalAllowed and
OPACFineNoRenewals with a patron who has outstanding fines:

- OpacRenewalAllowed ON and OPACFineNoRenewals ON (set to be triggered
  by the test patron's fines): Logging in to the OPAC the patron should
  see a warning on opac-user.pl about not being able to renew items
  because of fines.

- OpacRenewalAllowed ON and OPACFineNoRenewals OFF (threshold high
  enough not to trigger a block): No warning appears.

- OpacRenewalAllowed OFF and OPACFineNoRenewals ON: No warning appears.

- OpacRenewalAllowed OFF and OPACFineNoRenewals OFF: No warning appears.

If OpacRenewalAllowed is diabled and a patron's fines exceed the limit
set by OPACFineNoRenewals they should see no message.

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-ql.pl and perlcritic

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 29edd3797a7c950664ebc3be272ad4dca2575a80)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10590 - parameterise the limit option
Robin Sheat [Mon, 15 Jul 2013 14:06:40 +0000 (02:06 +1200)]
Bug 10590 - parameterise the limit option

The limit option was previously substituted directly into the query. The
previous patch on bug 10590 filters it on input, but there's no reason
not to have it made to work properly in the query for added safety.

To test:

[1] Go to the top checkouts report (http://OPAC/cgi-bin/koha/opac-topissues.pl)
[2] Run the report several times, varying the filters on
    number of results and item type.
[3] Verify the the list of top checkouts appears to be correct.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 89cf013a6fadcb1347151798f3fdab0d8c75cd15)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10590 - in opac-topissues limit param is not protected
Fridolyn SOMERS [Mon, 15 Jul 2013 11:00:18 +0000 (13:00 +0200)]
Bug 10590 - in opac-topissues limit param is not protected

In opac-topissues page, the limit URL argument is directly added to SQL query.

This patch adds protections : limit must only contain digits and must be lower than 100.

Test plan :
- Edit URL to : /cgi-bin/koha/opac-topissues.pl?limit=10&branch=&itemtype=&timeLimit=999&do_it=1
=> You get the results of 10 most cheched-out of all time
- Edit URL to : /cgi-bin/koha/opac-topissues.pl?limit=&branch=&itemtype=&timeLimit=999&do_it=1
=> You get the results of 10 most cheched-out of all time
- Edit URL to : /cgi-bin/koha/opac-topissues.pl?limit=9999&branch=&itemtype=&timeLimit=999&do_it=1
=> You get the results of 100 most cheched-out of all time
- Edit URL to : /cgi-bin/koha/opac-topissues.pl?limit=WHERE&branch=&itemtype=&timeLimit=999&do_it=1
=> You get the results of 10 most cheched-out of all time

Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 57866d6b67c3f8b29290150f21c71395315a73fe)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10534 : Update of italian SQL files [Only for 3.12] This update for italian SQL...
Silvia Simonetti [Wed, 3 Jul 2013 15:33:11 +0000 (17:33 +0200)]
Bug 10534 : Update of italian SQL files [Only for 3.12] This update for italian SQL files doesn't cover Marc21 and Unimarc setup.

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I tested the web installer in Italian. No errors reported.
I also checked some of the created values and all looked fine.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some strings remain untranslated. Will welcome any folowup

11 years agoBug 10524 - dependency updates
Robin Sheat [Mon, 1 Jul 2013 15:06:09 +0000 (03:06 +1200)]
Bug 10524 - dependency updates

Include liblibrary-callnumber-lc-perl

Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10488: Followup replacing DELETEs by more restricted INSERTs
Marcel de Rooy [Mon, 1 Jul 2013 11:37:39 +0000 (13:37 +0200)]
Bug 10488: Followup replacing DELETEs by more restricted INSERTs

Instead of inserting followed by deleting, this patch combines the two where
clauses of both sql statements, meanwhile leaving the separation intact.

As suggested by Galen, removed all 162's from the non-default types.
The 162 calls for a new authority type. We can add that later on.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Ran this .sql script after deleting all auth records.
The former version had 9 types, 1148 tags and 11621 subfields.
This one has 9 types, 1140 tags and 11597 subfields.
That is expected: 8 tags 162 less and 8x3 subfields less.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 14babcecf681874e4a75eff0a5ba2d869f1966bf)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10488 - New MARC21 authority tags and subfields should be propagated to non-defau...
Bernardo Gonzalez Kriegel [Thu, 27 Jun 2013 01:27:14 +0000 (22:27 -0300)]
Bug 10488 - New MARC21 authority tags and subfields should be propagated to non-default frameworks

As proposed by the report creator, this patch
rewites authorities_normal_marc21.sql
using default authority framework to build all
current authtypes, then deleting irrelevant tags.

It also updates default authority framework
to last update (April 2013) adding new or
updated tags/subtags.

All new tags/subtags from Bug 9826 and this
one are included in all authtypes.

Deleted tags reflect current situation except
for 7XX tags thatl must be present for all authtypes.

Only for new installs

To test:
1) Apply patch
2) Delete all authtypes
exec in database
    delete from auth_types;
    delete from auth_tag_structure;
    delete from auth_subfield_structure;
3) Insert new auth framework
4) Verify absent tags. This can be done running

    select tagfield as from auth_tag_structure
    where authtypecode ='' and tagfield not in
    (select tagfield from auth_tag_structure
    where authtypecode = 'AUTH_TYPE')

for each authtype ( UNIF_TITLE, TOPIC_TERM, etc.)
The attached PDF could be used as a reference,
all that is white or green for each authtype must be
in the list (except for white 7XX tags)

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 61103a1f82dc0efd98a4629b0c650fa020ba73c8)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10317: improve display when order receiving page is given an invalid invoiceid
Jonathan Druart [Thu, 23 May 2013 14:42:38 +0000 (16:42 +0200)]
Bug 10317: improve display when order receiving page is given an invalid invoiceid

This patch fixes some things on the order receiving/parcel page.

1/ Removes dead code
2/ Displays an error message if invoiceid is unset or does not refer to an
invoice
3/ Fixes a bug in the note ("change note" and "add note" links)

Test plan:
1/ Try to call the invoice page with an existing invoiceid and check
that order results are consistent.
2/ Try without invoiceid or a bad invoiceid and check that an error
message is displayed.
3/ Add and change notes.

Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely for all tests done.
- parcel.pl with invalid invoicenumber gives a nice error message
- parcel.pl with a valid invoicenumber looks normal
- changing and editing order notes works well

Passes QA script.

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit d932f6ff250c3a50db379b23abfc40a77620e94b)

Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10474: Translate some English strings in German sample notices
Katrin Fischer [Sun, 16 Jun 2013 07:09:33 +0000 (09:09 +0200)]
Bug 10474: Translate some English strings in German sample notices

This translates 2 strings missed doing the initial translation in
ISSUESLIP.

To test:
- Run the web installer in German.
Altnernatively:
- Truncate your letters table and run the SQL against the database.

Check that the notices were added correctly, especially ISSUESLIP.

Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit aecb163f69b238314bbd67215ce2d8950aeab060)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10431 - Redundant mappings removed
Tomas Cohen Arazi [Mon, 24 Jun 2013 17:40:36 +0000 (14:40 -0300)]
Bug 10431 - Redundant mappings removed

There were 5 redundant mappings left in the file. They are removed.
Its almost a QA followup as everything went fine anyway.

Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 82e1b227943393c33dbec903a7287c49b593424c)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10431 - Spanish Zebra character sorting file
Tomas Cohen Arazi [Tue, 11 Jun 2013 13:46:36 +0000 (10:46 -0300)]
Bug 10431 - Spanish Zebra character sorting file

This patch provides a definition file for Spanish (es) character
sorting in Zebra. It is based on the ideas from Hugo Agud <hagud@orex.es>
and Pablo Bianchi <pablo.bianchi@gmail.com>.

Makefile.PL is fixed to notice the existence of the 'es' language. The
docs for koha-create are touched too.

To test:
Tarball
=======
- Go through the install process, choosing 'es' for the Zebra's language step
- Koha should work as usual.
- Running this should show the lang definition is properly set.
$ grep -R "lang_defs/es" /etc/koha/*
(stuff like zebradb/zebra-biblios-dom.cfg:profilePath:...etc/koha/zebra/lang_defs/es... should show)
- This file should be present:
 /etc/koha/zebradb/lang_defs/es/sort-string-utf.chr

Packages
========
- Build your own package, it shouldn't break the packaging
- Try the new package, using koha-create to set an instance using --lang 'es'

Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 343c93ea4358d7b78dec25dfbcca525eabbfa6bf)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10379 - Followup: add koha-rebuild-zebra -q to the man page
Magnus Enger [Tue, 25 Jun 2013 06:39:23 +0000 (08:39 +0200)]
Bug 10379 - Followup: add koha-rebuild-zebra -q to the man page

The first patch on this bug forgot to add the new -q option to
koha-rebuild-zebra to the man page for that command. This patch
fixes it.

To test, run something like these commands:

$ xsltproc /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl \
  debian/docs/koha-rebuild-zebra.xml
$ man -l koha-rebuild-zebra.8
This should display the man page. (Remember to remove koha-rebuild-zebra.8
when you are done :-)

$ prove xt/verify-debian-docbook.t
All tests should pass.

Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 114ad0015b209404b30289397646cb2f21d4aa54)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 10379: silence zebra rebuild cron when no instances are enabled
Robin Sheat [Thu, 30 May 2013 04:12:13 +0000 (16:12 +1200)]
Bug 10379: silence zebra rebuild cron when no instances are enabled

This adds a -q option to koha-rebuild-zebra that prevents it outputting
help if no instances are provided on the command line. This means that
if you've just installed the package, you won't get messages from cron
telling you how to use the script.

Test plan:
* install koha-common 3.12 or master onto a system with no enabled
  instances.
* note that you or the sysadmin will start getting emails every 5
  minutes.
* replace /etc/cron.d/koha-common and /usr/sbin/koha-rebuild-zebra with
  the versions from this patch.
* note that the emails stop flowing.

Signed-off-by: Magnus Enger <magnus@enger.priv.no>
"sudo koha-rebuild-zebra -q" gives no output, as expected.
Followed the test plan, all looks good.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit c31e553a72d40bf0b1c099284ecbb4b95833e186)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 9890: fix plugin handling by koha-create and koha-create-dirs
Tomas Cohen Arazi [Mon, 27 May 2013 15:17:15 +0000 (12:17 -0300)]
Bug 9890: fix plugin handling by koha-create and koha-create-dirs

1) koha-create: fill in __PLUGINS_DIR__
2) koha-create-dirs: create the directory, set permissions (writeable by the koha user)

Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 061eb659267925388d1902987efaf275e536f953)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 9826 - Missing fields in MARC21 authority framework
Bernardo Gonzalez Kriegel [Thu, 14 Mar 2013 21:37:05 +0000 (18:37 -0300)]
Bug 9826 - Missing fields in MARC21 authority framework

This patch updates MARC21 authority framework adding
missing tags/subtags up to Update No. 15 (September 2012)

Missing tags and corresponding subtags only added to
default authority framework.

For present authtypes only missing subtags are added.

Also updates a few legends to match those from LOC.

No deletions except for a few not relevant tags in
present authtypes without subfields.

Only to new installs.

To test:
1) Delete present authority frameworks
2) Load new frameworks. On default there are
many new tags/subtags. On present authtypes
only a few new/renamed subtags.

Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 12874c4cf71c199cc2d383cf26bdcca89220b6bf)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 9541: make OPAC login page respect OPAC_CSS_OVERRIDE
Kyle M Hall [Tue, 19 Feb 2013 16:41:59 +0000 (11:41 -0500)]
Bug 9541: make OPAC login page respect OPAC_CSS_OVERRIDE

When clicking the login link for opac-user.pl in a multiple branch
scenario the environment variable for OPAC_CSS_OVERRIDE was ignored from
the koha-conf.xml file.  It seems like is is working on every page in
the opac except for the login page.

Test Plan:
1) Set up a Koha server with 2 separate catalog configurations
   ( e.g. opac1.kohatest, opac2.kohatest )
2) Set the OPAC_CSS_OVERRIDE directive for separate css files
   in each opac
3) Browse to the opac login page, note the css is not applied
4) Apply this patch
5) Reload the page, note the css is now applied

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 71b79d59908cd85130afd8600eff0f93fc79b8a9)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
11 years agoBug 9665: QA follow up fixing tabs
Chris Cormack [Thu, 13 Jun 2013 08:36:36 +0000 (20:36 +1200)]
Bug 9665: QA follow up fixing tabs

Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 0e0403372e608dc04d12ce5800a997dd3059e3df)

11 years agoBug 9665: add RIS and BIBTEXT bibliographic record export to staff interface
Owen Leonard [Fri, 31 May 2013 15:03:56 +0000 (11:03 -0400)]
Bug 9665: add RIS and BIBTEXT bibliographic record export to staff interface

The OPAC offers RIS and BIBTEX as choices for bibliographic downloads,
but the staff client was missing these options. This patch adds them.

To test, view a record in the staff client (detail.pl, MARCdetail.pl,
etc.) and click the "Save..." toolbar button. BIBTEX and RIS should be
available and functional.

Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 4b9a6d803f7ad11a4e077140820bfeda0d4d196a)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nice fix, works as expected.

11 years agoBug 10396: remove unnecessary date-picker widgets from Catalog statistics form
Sophie Meynieux [Mon, 10 Jun 2013 13:32:57 +0000 (15:32 +0200)]
Bug 10396: remove unnecessary date-picker widgets from Catalog statistics form

In particular, removed it from the call number and publication year
input fields.

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit d7bfba8a106fbb00331e16dbc0943226bad24668)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected, simple patch

11 years agoBug 10439: fix bug preventing the library for a notice from being changed
Jonathan Druart [Mon, 10 Jun 2013 12:05:32 +0000 (14:05 +0200)]
Bug 10439: fix bug preventing the library for a notice from being changed

2 javascript functions should be apply only in a specific case, not for all
views.

Test plan:

- Switch on the IndependentBranches pref and log
  in as a superlibrarian.
- Try to change the library for a notice. Before the patch,
  no change is applied.
- Try to create a new notice, changing the library from
  default in the process.  Before the patch, the notice
  is not created.

The bug can also be reproduced when IndependentBranches is
off, in which case the staff user need not be a superlibrarian.

Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 77a5e3e365a50b02c9f224d731e05de90fc667c9)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan works as advertised.