]> git.koha-community.org Git - koha.git/log
koha.git
11 months agoBug 33164: Ensure return claim message shows if lost item return blocked
Aleisha Amohia [Tue, 7 Mar 2023 22:07:04 +0000 (11:07 +1300)]
Bug 33164: Ensure return claim message shows if lost item return blocked

This fix ensures that a return claim confirmation always shows, even if
the return of lost items has been blocked by BlockReturnOfLostItems
being enabled.

To test:

1. Set BlockReturnOfLostItems system preference to Block
2. Check out an item to a patron
3. Go to the patrons page and claim a return on the item
4. Check in the item and keep checking in the item. Notice the message
"Item is lost, cannot be checked in." shows every time, but the return
claim message only shows sometimes.

5. Apply the patch and restart services

6. Check in the item and keep checking in the item. Confirm both the
lost message shows and the return claim message shows every time.
7. Confirm the return of the item is still blocked.

Sponsored-by: Pymble Ladies' College
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 21431: Adjust template for logviewer
Marcel de Rooy [Thu, 2 Nov 2023 13:41:21 +0000 (13:41 +0000)]
Bug 21431: Adjust template for logviewer

Test plan:
Verify that you can filter by reset password.
And that the uppercase code is replaced by a description.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 21431: Add unit test
Marcel de Rooy [Thu, 2 Nov 2023 12:59:03 +0000 (12:59 +0000)]
Bug 21431: Add unit test

Test plan:
Run t/db_dependent/Koha/Patrons.t

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 21431: Add action parameter to set_password
Marcel de Rooy [Thu, 2 Nov 2023 12:51:35 +0000 (12:51 +0000)]
Bug 21431: Add action parameter to set_password

Added to the call in opac-password-recovery.pl. This allows
differentiating between password change and password reset when
viewing the logs.

Test plan:
Enable BorrowersLog.
Do a password recovery on OPAC.
Check with log viewer for 'RESET PASS' action.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35065: DBRev 23.06.00.078
Tomas Cohen Arazi [Thu, 9 Nov 2023 17:48:33 +0000 (14:48 -0300)]
Bug 35065: DBRev 23.06.00.078

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35065: (follow-up) Add entry to HTML customization help include
Owen Leonard [Wed, 25 Oct 2023 16:21:44 +0000 (16:21 +0000)]
Bug 35065: (follow-up) Add entry to HTML customization help include

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35065: Convert SelfCheckHelpMessage system preference to HTML customization
Owen Leonard [Mon, 16 Oct 2023 16:16:13 +0000 (16:16 +0000)]
Bug 35065: Convert SelfCheckHelpMessage system preference to HTML customization

This patch moves the SelfCheckHelpMessage system preference into HTML
customizations, making it possible to have language- and
library-specific content.

To test you should have some content in the SelfCheckHelpMessage
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.

- In the staff client, go to Tools -> HTML customizations and verify
  that the content from SelfCheckHelpMessage is now stored there.
- The HTML customization entry form should offer SelfCheckHelpMessage
  as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
  - perl misc/translator/translate update fr-FR
  - perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
  preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SelfCheckHelpMessage HTML customization and add unique
  content to the "fr-FR" tab.

- Log into the self checkout system and click the "Help" link at the
  top.
- On the help page, confirm that the SelfCheckHelpMessage content is
  shown there.
- Switch to your updated translation and confirm that the content you
  added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
  "SelfCheckHelpMessage." It should return no results.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35278: Fix warn from column_settings.pl
Marcel de Rooy [Mon, 6 Nov 2023 14:00:49 +0000 (14:00 +0000)]
Bug 35278: Fix warn from column_settings.pl

We need to add scalar to the calls. These parameters are not meant
to be used as multi_param.

Test plan:
Try With and without this patch on staff:

Try: /cgi-bin/koha/admin/columns_settings.pl
=> WITHOUT: No warnings
=> WITH: Same. No change.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&page=basket
=> WITHOUT: Opens module, scrolls down. CGI::param called in list context in logfile
=> WITH: Opens module, scrolls down.
Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&page=basket&table=orders
=> WITHOUT: Opens module, scrolls down. CGI::param called in list context in logfile
=> WITH: Opens module, scrolls down.

Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&module=admin
* Hash like: panel => acqui, admin => page, undef  => table, undef => modules, $modules (SHIFTED)
=> WITHOUT: Acqui expanded showing: There is no page using the table configuration in this module.
=> CGI::param warning in log.
=> And: Problem = a value of table has been passed to param without key
=> And: Problem = a value of modules has been passed to param without key
=> WITH: Only the first module (Acqui) should be expanded.

Try: /cgi-bin/koha/admin/columns_settings.pl?module=acqui&module=admin&page=basket&table=orders
* Hash like: panel => acqui, admin => page, basket => table, orders => modules, $modules hash (SHIFTED)
=> WITHOUT: Acqui expanded showing: There is no page using the table configuration in this module.
=> And: CGI param log warning.
=> WITH:: Opens Acqui. Second module ignored. Scrolling.

Try: /cgi-bin/koha/admin/columns_settings.pl?module=admin&module=acqui&page=basket&table=orders
* Hash like: panel => admin, acqui=> page, basket => table, orders => modules, $modules hash (SHIFTED)
=> WITHOUT: Admin expanded showing: There is no page using the table configuration in this module.
=> And: CGI param log warning.
=> WITH: Admin should be expanded (page and table ignored, not in Admin). No scroll.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34587: (follow-up) Remove unnecessary code
Matt Blenkinsop [Thu, 9 Nov 2023 17:31:57 +0000 (17:31 +0000)]
Bug 34587: (follow-up) Remove unnecessary code

This patch removes some commented out lines and some unnecessary imports. No impact to working code - self signoff

Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35063: (follow-up) Adjust dbrevs to the reference format
Tomas Cohen Arazi [Thu, 9 Nov 2023 17:39:45 +0000 (14:39 -0300)]
Bug 35063: (follow-up) Adjust dbrevs to the reference format

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35063: (follow-up) Add reference example for HTML customizations on skeleton.pl
Tomas Cohen Arazi [Thu, 9 Nov 2023 17:33:59 +0000 (14:33 -0300)]
Bug 35063: (follow-up) Add reference example for HTML customizations on skeleton.pl

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35063: DBRev 23.06.00.077
Tomas Cohen Arazi [Thu, 9 Nov 2023 17:26:27 +0000 (14:26 -0300)]
Bug 35063: DBRev 23.06.00.077

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35063: (follow-up) Add entry to HTML customization help include
Owen Leonard [Wed, 25 Oct 2023 16:14:38 +0000 (16:14 +0000)]
Bug 35063: (follow-up) Add entry to HTML customization help include

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35063: Convert SelfCheckInMainUserBlock system preference to HTML customization
Owen Leonard [Mon, 16 Oct 2023 15:16:22 +0000 (15:16 +0000)]
Bug 35063: Convert SelfCheckInMainUserBlock system preference to HTML customization

This patch moves the SelfCheckInMainUserBlock system preference into
HTML customizations, making it possible to have language- and
library-specific content.

To test you should have some content in the SelfCheckInMainUserBlock
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.

- In the staff client, go to Tools -> HTML customizations and verify
  that the content from SelfCheckInMainUserBlock is now stored there.
- The HTML customization entry form should offer
  SelfCheckInMainUserBlock as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
  - perl misc/translator/translate update fr-FR
  - perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
  preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SelfCheckInMainUserBlock HTML customization and add unique
  content to the "fr-FR" tab.

- Log into the self check-in system and confirm that the
  SelfCheckInMainUserBlock content is shown there.
- Switch to your updated translation and confirm that the content you
  added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
  "SelfCheckInMainUserBlock." It should return no results.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35048: DBRev 23.06.00.076
Tomas Cohen Arazi [Thu, 9 Nov 2023 17:24:29 +0000 (14:24 -0300)]
Bug 35048: DBRev 23.06.00.076

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35048: (follow-up) Add entry to HTML customization help include
Owen Leonard [Wed, 25 Oct 2023 16:08:45 +0000 (16:08 +0000)]
Bug 35048: (follow-up) Add entry to HTML customization help include

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35048: Convert SCOMainUserBlock system preference to HTML customization
Owen Leonard [Thu, 12 Oct 2023 18:01:04 +0000 (18:01 +0000)]
Bug 35048: Convert SCOMainUserBlock system preference to HTML customization

This patch moves the SCOMainUserBlock system preference into HTML
customizations, making it possible to have language- and
library-specific content.

The patch also makes a minor fix to CSS in order to get the "Back to
top" link to show up correctly in self-checkout and self-checkin.

To test you should have some content in the SCOMainUserBlock
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.

- In the staff client, go to Tools -> HTML customizations and verify
  that the content from SCOMainUserBlock is now stored there.
- The HTML customization entry form should offer SCOMainUserBlock
  as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
  - perl misc/translator/translate update fr-FR
  - perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
  preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SCOMainUserBlock HTML customization and add unique
  content to the "fr-FR" tab.

- Log into the self checkout system and confirm that the
  SCOMainUserBlock content is shown there.
- Switch to your updated translation and confirm that the content you
  added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
  "SCOMainUserBlock." It should return no results.

Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35194: Remove obsoleted sortable function
Marcel de Rooy [Thu, 9 Nov 2023 10:35:06 +0000 (10:35 +0000)]
Bug 35194: Remove obsoleted sortable function

Removes two occurrences and a commented one.

Test plan:
[1] Go to cataloguing editor. Open dev console. Clone 500.
[2] Go to Admin/Did you mean. Try to toggle options.

With this patch it works. Without this patch, JS errors.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34413: Fix style of Flatpickr in iOS mobile view
Owen Leonard [Thu, 9 Nov 2023 13:21:06 +0000 (13:21 +0000)]
Bug 34413: Fix style of Flatpickr in iOS mobile view

This patch updates Flatpickr CSS in the OPAC and staff interface so that
date fields are displayed correctly in iOS mobile views.

To test, apply the patch and rebuild the OPAC and staff interface CSS.

- In the OPAC, click "Create new account"
- In the account entry form, confirm that the date of birth field looks
  correct and that the date-picker works as it should.
- In the staff client, go to Patrons -> New patron.
- Check the date of birth field in this form too.

This patch has been tested in the Xcode iOS device simulator with iOS
17. While I wasn't able to reproduce the problem in Firefox, I was able
to use the developer tools' responsive design mode to trigger the mobile
view and thus be able to see the styles which are being applied:

- In the OPAC, on the "Create new account" screen, open the Web
  Developer Tools panel (Tools -> Browser tools -> Web Developer Tools).
- Click the "Responsive Design Mode" button in the upper-right corner of
  the developer tools panel (it looks like a phone and tablet together).
- The main browser window will now how some settings at the top.
- In the first dropdown, choose an iPhone model.
- The date of birth field should now be styled differently because of
  the addition of a "flatpickr-mobile" style.
- Right-click the field and choose "Inspect." In the developer console
  you can see the styles which are being applied to the field. One of
  those should be ".flatpickr-input.flatpickr-mobile"

Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34058: Use buildSearchPatronQuery when searching for patrons on left side filters
Pedro Amorim [Tue, 27 Jun 2023 09:08:52 +0000 (09:08 +0000)]
Bug 34058: Use buildSearchPatronQuery when searching for patrons on left side filters

This will now use the centered logic from buildSearchPatronQuery, not only
fixing the original issue of not being considering all the terms in the
search input, but also reusing already established code.

Test plan, k-t-d:
1) Install FreeForm, enable ILLModule sys pref, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) Create a FreeForm ILL request and input 23529000035676 in the cardnumber, that's "Henry Acevedo".
3) Go back to the ILL list table, input "henry" in the bottom "Patron" filter input and press the "Search" button, notice it fetches the request correctly.
4) Now do the the same search but with "henry acevedo", notice the request is not retrieved.
5) Apply patch. Repeat. Do the same for the "patron" input field and the "keyword" input field.

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34058: Preparation: buildPatronSearchQuery
Pedro Amorim [Tue, 27 Jun 2023 09:07:49 +0000 (09:07 +0000)]
Bug 34058: Preparation: buildPatronSearchQuery

Add table_prefix argument to buildPatronSearchQuery.
This allows the buildPatronSearchQuery function to also perform the search
on a related table, instead of the default patron table.
This is relevant because the query will be performed on the ILL API endpoint,
so the table being searched will have to be prefixed with 'patron.', instead of the
default 'me.'

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35303: (bug 26916 follow-up) Fix paton autocomplete
Jonathan Druart [Thu, 9 Nov 2023 14:10:39 +0000 (15:10 +0100)]
Bug 35303: (bug 26916 follow-up) Fix paton autocomplete

Fix the following JS error:
Uncaught TypeError: search_fields.forEach is not a function

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35295: Move JS asset in returns.tt
Lucas Gass [Wed, 8 Nov 2023 21:18:27 +0000 (21:18 +0000)]
Bug 35295: Move JS asset in returns.tt

To Test:
1. Place a hold
2. Check-in an item of the held record
3. No hold modal ðŸ˜±
4. APPLY PATCH
5. Hold modal!!!

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34517: DBRev 23.06.00.075
Tomas Cohen Arazi [Thu, 9 Nov 2023 13:11:08 +0000 (10:11 -0300)]
Bug 34517: DBRev 23.06.00.075

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34517: (QA follow-up) Standardize boolean attributes definition
Tomas Cohen Arazi [Thu, 9 Nov 2023 13:09:20 +0000 (10:09 -0300)]
Bug 34517: (QA follow-up) Standardize boolean attributes definition

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34517: DBIC schema
Tomas Cohen Arazi [Thu, 9 Nov 2023 13:07:06 +0000 (10:07 -0300)]
Bug 34517: DBIC schema

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34517: (QA follow-up) Perltidy and fix column check
Katrin Fischer [Sun, 5 Nov 2023 01:14:52 +0000 (01:14 +0000)]
Bug 34517: (QA follow-up) Perltidy and fix column check

Without the fix a second run of the database update would fail.

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34517: Add option search patron attributes by default
Nick Clemens [Fri, 11 Aug 2023 19:31:57 +0000 (19:31 +0000)]
Bug 34517: Add option search patron attributes by default

This patch moves form any staff_searchable attribute being automatically
included in the the Standard patron serch, to allowing the librarian to choose.
Current searchable attributes will be marked as 'searched_by_default'

To test:
1 - Add a searchable patron attribute type
2 - Add some values
3 - Confirm they are searched in a 'Standard' patron search
4 - Apply patch
5 - Go to admin - >patron attribute types
6 - Note new 'Searching' column
7 - Confirm attribute is 'Searched by default'
8 - Confirm searches work as before
9 - Edit the attribute type
10 - Uncheck 'searched_by_default'
11 - Save
12 - Confirm attribute not searched in 'Standard' search
13 - Select the attribute in patron search dropdowns
14 - Confirm it is correctly searched

Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34517: Add boolean to search columns for schema
Nick Clemens [Fri, 11 Aug 2023 13:11:20 +0000 (13:11 +0000)]
Bug 34517: Add boolean to search columns for schema

Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34517: DB updates
Nick Clemens [Fri, 11 Aug 2023 13:07:52 +0000 (13:07 +0000)]
Bug 34517: DB updates

Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34708: Add ability to modify orderline to increase quantity
Aleisha Amohia [Mon, 11 Sep 2023 20:38:12 +0000 (20:38 +0000)]
Bug 34708: Add ability to modify orderline to increase quantity

This enhancement allows libraries to modify an existing orderline and increase the quantity in the order. The quantity is increased by adding more items to the order, through the usual Item for which is visible when adding or modifying an order.

To test:

1. Ensure you have a budget, fund, vendor etc. to use the Acquisitions module
2. Open a new basket. Make sure you do NOT check the 'orders are standing' option
3. Add an order to the basket using any method. Add an item or more to this orderline and save the order to the basket
4. Click Modify to edit the orderline
5. Notice the quantity text field. Try to directly change this number. You'll get an error pop-up and be redirected back to the basket.

6. Apply the patch, restart services, refresh the basket page

7. Click Modify to edit the orderline
8. Notice the item form and Items list table is visible with your existing item(s) for this order. There should be no Action buttons as actions can't be done on an existing item order.
9. Confirm you are able to add more items to the Items list and to the order by filling out the form and clicking 'Add item' as normal. Confirm the quantity increases accordingly.
10. Confirm the Edit and Delete buttons for newly added items work as expected
11. Save and confirm the quantity for the orderline has increased
12. Confirm this behaviour persists with the other methods of adding new orders to a basket

Sponsored-by: Pymble Ladies' College
Signed-off-by: Katariina Hanhisalo <katariina.hanhisalo@xamk.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Perltidy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34894: DBRev 23.06.00.074
Tomas Cohen Arazi [Thu, 9 Nov 2023 12:57:01 +0000 (09:57 -0300)]
Bug 34894: DBRev 23.06.00.074

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34894: (follow-up) Fix id for HTML customization help
David Nind [Thu, 26 Oct 2023 20:23:44 +0000 (20:23 +0000)]
Bug 34894: (follow-up) Fix id for HTML customization help

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34894: (follow-up) Add entry to HTML customization help include
Owen Leonard [Wed, 25 Oct 2023 16:01:19 +0000 (16:01 +0000)]
Bug 34894: (follow-up) Add entry to HTML customization help include

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34894: Convert OpacSuppressionMessage system preference to HTML customization
Owen Leonard [Fri, 29 Sep 2023 14:19:15 +0000 (14:19 +0000)]
Bug 34894: Convert OpacSuppressionMessage system preference to HTML customization

This patch moves the OpacSuppressionMessage system preference into HTML
customizations, making it possible to have language- and library-specific
content.

To test you should have some content in the OpacSuppressionMessage
system preference before applying the patch. Apply the patch and run the
database update process.

- In the staff interface, locate a bibliographic record and open it for
  editing.
- Under tab 9, tag 942, change subfield n, "Suppress in OPAC", to "Yes"
  and save the record.

- Go to the OPAC and try to navigate directly to the bibliographic
  detail page for that record:
  /cgi-bin/koha/opac-detail.pl?biblionumber=X
- You should be redirectd to the "Blocked" page. Under the message "You
  are not authorized to view this record" you should see the content
  which was previously in the OpacSuppressionMessage system preference.

- In the staff client, go to Tools -> HTML customizations and verify
  that the content from OpacSuppressionMessage is now stored there.
- The HTML customization entry form should offer OpacSuppressionMessage
  as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
  - perl misc/translator/translate update fr-FR
  - perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
  preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the OpacSuppressionMessage HTML customization and add unique
  content to the "fr-FR" tab.

- Go to the OPAC and switch to your updated translation. Try to view
  the suppressed record again and confirm that the content you added
  for your translation shows up correctly.
- Go to Administration -> System preferences and search for
  "OpacSuppression." The description of these preferences should show an
  updated message about using HTML customizations to create
  OpacSuppressionMessage content.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 32986: (follow-up) Unit tests
Nick Clemens [Mon, 6 Nov 2023 12:36:43 +0000 (12:36 +0000)]
Bug 32986: (follow-up) Unit tests

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 32986: (QA follow-up) Remove 'slip' from print dialog
Katrin Fischer [Sat, 4 Nov 2023 22:55:28 +0000 (22:55 +0000)]
Bug 32986: (QA follow-up) Remove 'slip' from print dialog

This makes it more flexible and the slip can be added to the
notice name easily.

For example: In German the slip would usually be part of the word, not separate:
Gebührenquittung (slip = quittung)

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 32986: (QA follow-up) Rename notices module
Katrin Fischer [Sat, 4 Nov 2023 22:50:37 +0000 (22:50 +0000)]
Bug 32986: (QA follow-up) Rename notices module

This renames the notices and slips module from
Patrons toolbar (slip) to Patrons (custom slip)

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 32986: (follow-up) Fix CircAutoPrintQuickSlip and remove unecessary module usage
Nick Clemens [Tue, 10 Oct 2023 16:14:02 +0000 (16:14 +0000)]
Bug 32986: (follow-up) Fix CircAutoPrintQuickSlip and remove unecessary module usage

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 32986: (follow-up) POD
Nick Clemens [Fri, 14 Jul 2023 12:54:35 +0000 (12:54 +0000)]
Bug 32986: (follow-up) POD

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 32986: (follow-up) Tidy conditional in letter.pl
Nick Clemens [Fri, 14 Jul 2023 12:47:29 +0000 (12:47 +0000)]
Bug 32986: (follow-up) Tidy conditional in letter.pl

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 32986: (QA follow-up) Fix QA script complaints: tabs and TT filters
Katrin Fischer [Tue, 11 Apr 2023 21:35:56 +0000 (21:35 +0000)]
Bug 32986: (QA follow-up) Fix QA script complaints: tabs and TT filters

* Perltidied the section with tabs in printslip.pl
* Fixed indentation and tabs in letter.tt
* Added missing TT filters to members-toolbar.inc

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 32986: Add patron_slip module to letters and allow printing on members account
Nick Clemens [Thu, 16 Feb 2023 19:50:49 +0000 (19:50 +0000)]
Bug 32986: Add patron_slip module to letters and allow printing on members account

This patch adds a new module to letters 'patron_slip' / Patrons toolbar
(slip)

This also combines some of the slip printing JS to make things more
direct

To test:
1 - Apply patch
2 - restart_all
3 - yarn build
4 - Confirm you can print slip, summary, quickslip, and checkin slip
  when viewing a patron's account
5 - Enable  DisplayClearScreenButton syspref, and test that it works
  with both values
6 - Go to Tools->Notices and slips
7 - Define a new notice in the 'Patron toolbar (slip)' module
8 - Enter content like below in the 'Print' transport:
Patron has [% borrower.holds.count %] holds

List of holds:
[% FOREACH hold IN borrower.holds %]
===============================
    Reserve id: [% hold.reserve_id %]
    Title [% hold.biblio.title %]
[% END %]
9 - Go to patron scree
10 - Note new option under 'Print'
11 - Print the new slip and confirm it works (try with and without
  placing holds for patron

Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 26468: Add damaged as a searchable status in item search
Lucas Gass [Fri, 13 Oct 2023 21:01:58 +0000 (21:01 +0000)]
Bug 26468: Add damaged as a searchable status in item search

This patch removes the Damaged radio box options ( Ignore, yes, no ) in favor a full damage status search option

To test:
1. APPLY PATCH, restart services.
2. Make sure you mark some items as damaged.
3. Go to the item and search and limit by 'Damaged'
4. You should only see your 'Damaged' items.
5. Export the results as a CSV, make sure the CSV is well-formed and accurate.

Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Perltidied.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35254: Add import_record_id to order inputs
Nick Clemens [Fri, 3 Nov 2023 20:10:01 +0000 (20:10 +0000)]
Bug 35254: Add import_record_id to order inputs

This patch follows the logic of bug 32166 and adds specific inputs for each order to avoid any misalignment when some records are not imported

To test:
1 - Find a vendor in acquisitions
2 - Create or find an open basket
3 - Add to basket form a new file
4 - Stage file and add to basket
5 - Select the second record in the list
6 - Enter price info
7 - Save (don't forget, you need to set item type in the second tab)
8 - The order has no price info!
9 - Apply patch
10 - Repeat 3-7 above, staging file fresh
11 - Confirm order has correct prices
12 - Test with a file with many records
13 - Confirm any combination of choosing/skipping records works as expected

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35262: Improve OPAC self registration confirmation page
Owen Leonard [Mon, 6 Nov 2023 19:40:06 +0000 (19:40 +0000)]
Bug 35262: Improve OPAC self registration confirmation page

This patch corrects logic in the OPAC self registration confirmation
template so that the right column markup is shown when various
combinations of OpacNav, OpacNavBottom, and OpacNavRight are displayed.

To test, apply the patch and enable the PatronSelfRegistration system
preference, and deactivate the PatronSelfRegistrationVerifyByEmail
preference.

- Go to the OPAC and start the process of registering online.
- Fill in the form and submit it.
- On the registration confirmation page, check that the layout looks
  correct.
- Test with the presence of various combinations of OpacNav,
  OpacNavBottom, and OpacNavRight HTML customizations.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35206: Adjust style of add button on curbside pickups administration
Owen Leonard [Tue, 31 Oct 2023 17:10:15 +0000 (17:10 +0000)]
Bug 35206: Adjust style of add button on curbside pickups administration

This patch adds Bootstrap classes to the "Add" button on the curbside
administration page, in the "Curbside pickup hours" section. This makes
it consistent with the markup of similar buttons in the interface and
makes it slightly smaller so that it fits better in the form.

To test, apply the patch and make sure the "CurbsidePickup" preference
is enabled.

- Go to Administration -> Curbside pickups.
- Fill out the form, including the "New slot" fields in the "Curbside
  pickup hours" section.
  - Confirm that the corresponding "Add" button looks correct, and that
    it works to add your new slot.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 33217: DBRev 23.06.00.073
Tomas Cohen Arazi [Wed, 8 Nov 2023 20:50:20 +0000 (17:50 -0300)]
Bug 33217: DBRev 23.06.00.073

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 33217: (QA follow-up) Improve system preference description
Katrin Fischer [Sun, 5 Nov 2023 01:44:49 +0000 (01:44 +0000)]
Bug 33217: (QA follow-up) Improve system preference description

* Make sure MARC21 is mentioned, as this only updates MARC21 XSLT files
* Move ending punctuation outside the pull down
* remove 'obey' - it's not needed

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 33217: (QA follow-up) Tiny tidy of atomicupdate
Katrin Fischer [Sun, 5 Nov 2023 01:40:17 +0000 (01:40 +0000)]
Bug 33217: (QA follow-up) Tiny tidy of atomicupdate

Just adds an end and removes the commented line.

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 33217: Tidy
Nick Clemens [Wed, 25 Oct 2023 12:33:05 +0000 (12:33 +0000)]
Bug 33217: Tidy

Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 33217: DB update
Nick Clemens [Tue, 14 Mar 2023 15:12:32 +0000 (15:12 +0000)]
Bug 33217: DB update

Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 33217: Allow specifiying sort field and order for authro links
Nick Clemens [Mon, 13 Mar 2023 19:45:49 +0000 (19:45 +0000)]
Bug 33217: Allow specifiying sort field and order for authro links

When using the facets for author, i.e. limiting a search, it makes sense to preserve the default sort order for the results (relevance, etc)

When clicking on an author to search the catalog for all works by an author, it would be nice to be able to optionally specify sorting for the listing - i.e. publication date, or title

This patch adds two new system preferences:
AuthorLinkSortBy
AuthorLinkSortOrder

To test:
1 - Do a search in intranet and staff for 'austen'
    or an author you have multiple titles from
2 - Click the linked name
3 - Note a new search is performed, sorted by field from
    defaultSortField  preference
4 - Apply patch, updatedatabase, restart_all
5 - Ensure nothing has changed by searching again
6 - Set AuthorLinkSortBy to 'date of publication' and
    AuthorLinkSortORder to asc
7 - Search again, comfirm links obey sorting specific above
8 - Test other values - confirm links are updated in both staff/opac
    and results/details

Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 26916: Adjust unit tests
Nick Clemens [Fri, 11 Aug 2023 17:40:28 +0000 (17:40 +0000)]
Bug 26916: Adjust unit tests

Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 26916: Show searchable patron attributes in patron search dropdown
Nick Clemens [Fri, 11 Aug 2023 15:57:42 +0000 (15:57 +0000)]
Bug 26916: Show searchable patron attributes in patron search dropdown

This patch adds attributes that have been marked searchable to the patron
search dropdowns

To test:
1 - Define some new patron attribute types and make then staff_searchable
2 - Add some values to patrons
3 - Confirm they are searched in 'Standard' search, but there is no other way to search them
4 - Apply patch
5 - Confirm the fields now show in patorn search dropdowns
6 - Search using 'standard' and confirm the searhc works
7 - Search specific attributes and confirm the searhc works

Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34519: (follow-up) fix QA tool complaints
Nick Clemens [Fri, 18 Aug 2023 12:16:29 +0000 (12:16 +0000)]
Bug 34519: (follow-up) fix QA tool complaints

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34519: Ensure we always have an array
Nick Clemens [Fri, 11 Aug 2023 16:43:14 +0000 (16:43 +0000)]
Bug 34519: Ensure we always have an array

Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34519: Unit tests
Nick Clemens [Fri, 11 Aug 2023 14:37:07 +0000 (14:37 +0000)]
Bug 34519: Unit tests

Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34519: Add a template plugin for fetch searchable patron attributes
Nick Clemens [Fri, 11 Aug 2023 14:16:12 +0000 (14:16 +0000)]
Bug 34519: Add a template plugin for fetch searchable patron attributes

This patch moves code form scripts to a template plguin and unifies the calls

To test:
1 - Add a searchable patron attribute type
2 - Add values to several patrons and test patron searching from
    Patrons home
    Patrons search results
    Holds request screen
    Article request screen
    Patron search sidebar
3 - Apply patch
4 - Confirm results are the same

Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34188: DBRev 23.06.00.072
Tomas Cohen Arazi [Wed, 8 Nov 2023 20:41:24 +0000 (17:41 -0300)]
Bug 34188: DBRev 23.06.00.072

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34188: (QA follow-up) Add standard validation to login form
Katrin Fischer [Sat, 4 Nov 2023 23:53:30 +0000 (23:53 +0000)]
Bug 34188: (QA follow-up) Add standard validation to login form

This changes how the required appears. Now it will display 'our'
text for requires fields instead of using the browser default.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34188: (QA follow-up) Fix different versions of system preference name: Force...
Katrin Fischer [Sat, 4 Nov 2023 23:46:39 +0000 (23:46 +0000)]
Bug 34188: (QA follow-up) Fix different versions of system preference name: Force(d)LibrarySelection

There were references to ForceLibrarySelection and ForceLibrarySelection (notice
the additional d) in the patch.

Standardized to: ForceLibrarySelection

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34188: (follow-up) Rename pref to 'ForceLibrarySelection' and tidy
Nick Clemens [Tue, 17 Oct 2023 19:32:44 +0000 (19:32 +0000)]
Bug 34188: (follow-up) Rename pref to 'ForceLibrarySelection' and tidy

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34188: Require Library Branch Selection when Logging in
Sam Lau [Thu, 6 Jul 2023 19:59:50 +0000 (19:59 +0000)]
Bug 34188: Require Library Branch Selection when Logging in

This patch adds the ability to force staff to select a library when
logging into the staff interface. This is done via a new system
preference: 'ForcedLibrarySelection'

To test:
1) Apply patch, restart_all, and updatedatabase
2) Log out of the staff interface. Notice the login form looks the same
   and the "Library:" dropdown has 'My Library" selected as default. Log
   back into the staff interface.
3) In Administration, search for the system preference
   "ForcedLibrarySelection". Set it to 'Force' and press save.
4) Log out of the staff interface. Notice that this time, the "Library:"
   dropdown is required and has a blank selection as the default.
5) Fill in the username and password but do not select a library. Click
   'Log in'
6) Notice you cannot log in and are asked to 'Please select an item in
   the list'
7) Select a library from the drop down and click 'Log in'
8) Notice the login was successful and you were logged in to the library
   you selected.
9) Try loggin in with some other libraries to verify it works as
   expected
10) Sign-off :)

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34328: DBRev 23.06.00.071
Tomas Cohen Arazi [Wed, 8 Nov 2023 20:36:37 +0000 (17:36 -0300)]
Bug 34328: DBRev 23.06.00.071

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34328: Make update idempotent
Martin Renvoize [Fri, 6 Oct 2023 09:41:20 +0000 (10:41 +0100)]
Bug 34328: Make update idempotent

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Perltidied the atomic update.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34328: (follow-up) Add description to en_GB
Martin Renvoize [Fri, 21 Jul 2023 07:21:23 +0000 (08:21 +0100)]
Bug 34328: (follow-up) Add description to en_GB

This follow-up adds the language description string for Scottish Gaelic
to the en_GB translation.

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34328: Add Scottish Gaelic to languages
Martin Renvoize [Thu, 20 Jul 2023 15:31:40 +0000 (16:31 +0100)]
Bug 34328: Add Scottish Gaelic to languages

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34985: Add a quantity field to the manual invoice form
Hammat Wele [Wed, 4 Oct 2023 17:36:05 +0000 (17:36 +0000)]
Bug 34985: Add a quantity field to the manual invoice form

This patch add a Quantity field and a Cost field to the manual invoice form this will allow to automatically multiply the amount when it has a default amount.

Test plan:

1) Apply the patch
2) Create multiple charge types some with default amount and some without default amount
    1-1) Go to Administraion -> Debit types
    1-2) Click on New Debit types
    1-3) Fill the form check the "Can be manually invoiced?" field
    1-5) Click on save
3) Create a manual invoice
    2-1) Find a patrons
    2-2) Click on Accounting tab
    2-3) Click on Create manual invoice tab
    2-4) Select a type with default amount set
        ->Cost field and Quantity field should be added to the form
    2-5) Edit the Cost field or Quantity field
        ->The amount will be automatically calculate
    2-6) Select a type with no default amount set
        ->Cost field and Quantity field should not be added to the form

Signed-off-by: Kristi Krueger <kkrueger@cuyahogalibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34889: DBRev 23.06.00.070
Tomas Cohen Arazi [Wed, 8 Nov 2023 20:32:15 +0000 (17:32 -0300)]
Bug 34889: DBRev 23.06.00.070

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34889: (follow-up) Add entry to HTML customization help include
Owen Leonard [Wed, 25 Oct 2023 15:12:21 +0000 (15:12 +0000)]
Bug 34889: (follow-up) Add entry to HTML customization help include

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34889: (follow-up) Revise database update following Bug 31383
Owen Leonard [Wed, 25 Oct 2023 14:53:25 +0000 (14:53 +0000)]
Bug 34889: (follow-up) Revise database update following Bug 31383

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34889: Convert PatronSelfRegistrationAdditionalInstructions system preference...
Owen Leonard [Fri, 22 Sep 2023 15:27:11 +0000 (15:27 +0000)]
Bug 34889: Convert PatronSelfRegistrationAdditionalInstructions system preference to HTML customization

This patch moves the PatronSelfRegistrationAdditionalInstructions system
preference into HTML customizations, making it possible to have
language- and library-specific content.

To test you should have some content in the
PatronSelfRegistrationAdditionalInstructions system preference before
applying the patch. Apply the patch and run the database update process.

 - In the staff client, go to Tools -> HTML customizations and verify
   that the content previously in the
   PatronSelfRegistrationAdditionalInstructions preference is
   now stored there.
 - The HTML customization entry form should offer
   PatronSelfRegistrationAdditionalInstructions as a choice under
   "Display location."
 - Go to Administration -> System preferences and enable
   "PatronSelfRegistration." Set "PatronSelfRegistrationVerifyByEmail"
   to "Don't require."
 - Go to the OPAC and click "Register here."
 - Submit a new registration and confirm that the content that was
   previously stored in the system preference is shown correctly on the
   registration confirmation page.
 - Update and reinstall active translations (for instance fr-FR):
   - cd misc/translator/
   - perl translate update fr-FR
   - perl translate install fr-FR
 - Enable the translation if necessary under Administration -> System
   preferences -> language.
 - Enable the "opaclanguagesdisplay" preference if necessary.
 - Edit the PatronSelfRegistrationAdditionalInstructions HTML
   customization and add unique content to the "fr-FR" tab.
 - Go to the OPAC and switch to your updated translation.
   Complete the online registration process again to confirm that the
   content you added for your translation shows up correctly on the
   confirmation page.
 - Go to Administration -> System preferences and confirm that the
   PatronSelfRegistrationAdditionalInstructions  preference has been
   removed.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34869: DBRev 23.06.00.069
Tomas Cohen Arazi [Wed, 8 Nov 2023 20:27:45 +0000 (17:27 -0300)]
Bug 34869: DBRev 23.06.00.069

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34869: (follow-up) Add entry to HTML customization help include
Owen Leonard [Wed, 25 Oct 2023 15:20:06 +0000 (15:20 +0000)]
Bug 34869: (follow-up) Add entry to HTML customization help include

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34869: (follow-up) Revise database update following Bug 31383
Owen Leonard [Wed, 25 Oct 2023 14:33:05 +0000 (14:33 +0000)]
Bug 34869: (follow-up) Revise database update following Bug 31383

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34869: Convert OPACResultsSidebar system preference to HTML customization
Owen Leonard [Thu, 21 Sep 2023 17:21:37 +0000 (17:21 +0000)]
Bug 34869: Convert OPACResultsSidebar system preference to HTML customization

This patch moves the OPACResultsSidebar system preference into HTML
customizations, making it possible to have language- and library-specific
content.

To test you should have some content in the OPACResultsSidebar system
preference before applying the patch. Apply the patch and run the
database update process.

 - Go to the OPAC and perform a catalog search.
 - Confirm that the content in the sidebar under the search facets,
   which was previously in the OPACResultsSidebar system preference, is
   still displayed.
 - In the staff client, go to Tools -> HTML customizations and verify
   that the content from OPACResultsSidebar is now stored there.
 - The HTML customization entry form should offer OPACResultsSidebar as
   a choice under "Display location."
 - Update and reinstall active translations (for instance fr-FR):
   - cd misc/translator/
   - perl translate update fr-FR
   - perl translate install fr-FR
 - Enable the translation if necessary under Administration -> System
   preferences -> language.
 - Enable the "opaclanguagesdisplay" preference if necessary.
 - Edit the OPACResultsSidebar HTML customization and add unique content
   to the "fr-FR" tab.
 - Go to the OPAC and switch to your updated translation. Perform
   another catalog search to confirm that the content you added for your
   translation shows up correctly.
 - Go to Administration -> System preferences and confirm that the
   OPACResultsSidebar preference has been removed.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 23798: DBRev 23.06.00.068
Tomas Cohen Arazi [Wed, 8 Nov 2023 17:56:20 +0000 (14:56 -0300)]
Bug 23798: DBRev 23.06.00.068

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 23798: Atomic update fixes
Tomas Cohen Arazi [Wed, 8 Nov 2023 17:53:11 +0000 (14:53 -0300)]
Bug 23798: Atomic update fixes

This patch makes the atomic update remove the syspref even if it wasn't
previously set. It also tweaks the printed information to comform with
current practices.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 23798: (follow-up) Revise database update following Bug 31383
Owen Leonard [Wed, 8 Nov 2023 16:56:09 +0000 (16:56 +0000)]
Bug 23798: (follow-up) Revise database update following Bug 31383

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 23798: (follow-up) Add entry to HTML customization help include
Owen Leonard [Wed, 25 Oct 2023 15:46:04 +0000 (15:46 +0000)]
Bug 23798: (follow-up) Add entry to HTML customization help include

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 23798: Convert OpacMaintenanceNotice system preference to additional contents
Owen Leonard [Thu, 12 Oct 2023 14:17:57 +0000 (14:17 +0000)]
Bug 23798: Convert OpacMaintenanceNotice system preference to additional contents

This patch moves the OpacMaintenanceNotice system preference into HTML
customizations, making it possible to have language-specific content.

The patch modifies the OPAC maintenance page template so that the
language selection menu can be shown correctly according to the
OpacLangSelectorMode preference.

To test you should have some content in the OpacMaintenanceNotice
system preference before applying the patch. Apply the patch and run the
database update process.

- In the staff client, go to Tools -> HTML customizations and verify
  that the content from OpacMaintenanceNotice is now stored there.
- The HTML customization entry form should offer OpacMaintenanceNotice
  as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
  - perl misc/translator/translate update fr-FR
  - perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
  preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Enable the "OpacMaintenance" system preference.
- Edit the OpacMaintenanceNotice HTML customization and add unique
  content to the "fr-FR" tab.

- Try to view any page in the OPAC. You should see the content you
  added to the OpacMaintenanceNotice HTML customization.
- Switch to your updated translation. The page should redisplay with
  your translated content.
- Go to Administration -> System preferences and search for
  "OpacMaintenanceNotice." The search should return no
  results.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 35261: Update links for self registration avoiding "here"
Owen Leonard [Mon, 6 Nov 2023 14:48:59 +0000 (14:48 +0000)]
Bug 35261: Update links for self registration avoiding "here"

This patch updates several OPAC templates to change the wording of the
self registration link to "Create an account."

Minor adjustments to CSS have been made to make whitespace around the
links more comfortable.

To test, apply the patch and rebuild the OPAC CSS.

- If necessary enable the PatronSelfRegistration system preference is
  enabled.
- Go to the OPAC and check the login form in the right-hand sidebar.
- Click the "Log in to your account" link in the header and check the
  form displayed in the modal window.
- Navigate directly to /cgi-bin/koha/opac-user.pl and check the link on
  the login page.
- Complete the self-registration process and check the link in the
  right-hand sidebar menu on the "Registration complete" page.

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 21284: (QA follow-up) Fix QA script issues
Kyle M Hall [Fri, 3 Nov 2023 16:45:22 +0000 (16:45 +0000)]
Bug 21284: (QA follow-up) Fix QA script issues

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 21284: (QA follow-up) Rename itemonhold and recordonhold
Kyle M Hall [Fri, 3 Nov 2023 16:43:47 +0000 (16:43 +0000)]
Bug 21284: (QA follow-up) Rename itemonhold and recordonhold

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 21284: ILS-DI: Allow GetPatronInfo to tell if a loaned item is on hold by someone...
Matthias Meusburger [Fri, 27 Apr 2018 14:22:28 +0000 (16:22 +0200)]
Bug 21284: ILS-DI: Allow GetPatronInfo to tell if a loaned item is on hold by someone else.

This patch adds two new entries in the loans section of GetPatronInfo response:

 - itemonhold: number of holds on this specific item.
 - recordonhold: number of holds on the record.

It allows an ILS-DI client to know if a loaned item is already on hold by someone else, and how many holds there are.

Test plan:
1. Apply the patch.
2. Enable the ILS-DI system preference.
3. Check out an item for a patron and make sure there no other holds at either an item or record level.
4. Check that the new itemonhold and recordonhold entries displayed are equal to zero (example: http://127.0.0.1:8080/cgi-bin/koha/ilsdi.pl?service=GetPatronInfo&patron_id=19&show_contact=0&show_loans=1).
5. Add either a record or item level hold for the record used in step 2.
6. Check that itemonhold and recordonhold values are incremented accordingly.
   Note: a hold at an item level counts as a hold at a record level, but not vice-versa.
7. Run the tests and make sure they pass: prove t/db_dependent/ILSDI_Services.t
8. Sign-off!

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34977: (QA follow-up) Tidy code
Kyle M Hall [Fri, 3 Nov 2023 16:10:42 +0000 (12:10 -0400)]
Bug 34977: (QA follow-up) Tidy code

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34977: The "Patron Lists" only allows deleting one list at a time
Salah Ghedds [Wed, 4 Oct 2023 18:43:54 +0000 (14:43 -0400)]
Bug 34977: The "Patron Lists" only allows deleting one list at a time

In the patrons lists, it's only possible to delete on list at a time. This patch add the possibility to select lists and delete them at once.

TEST PLAN
1. Apply the patch.
2. Create at least 2 patron lists (Navigate to Tools > Patron lists > New patron list).
3. Select the lists you want to delete.
4. Click the "Delete selected lists" button.
5. Confirm that the selected lists have been deleted.
6. Ensure that the button cannot be used if no list is selected.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34938: (QA follow-up) Tidy code
Kyle M Hall [Fri, 3 Nov 2023 15:58:30 +0000 (11:58 -0400)]
Bug 34938: (QA follow-up) Tidy code

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 34938: Add collection column to hold ratio report
Lucas Gass [Wed, 27 Sep 2023 18:38:31 +0000 (18:38 +0000)]
Bug 34938: Add collection column to hold ratio report

To test:
1. Create enough holds on items so that they will appear on the holds ratio report.
2. Visit circ/reserveratios.pl by going to Circulation > Holds ratios
3. No collection column.
4. Apply patch and restart services
5. Look again at circ/reserveratios.pl, now you should see a collection column.
6. Ensure that the data in the column looks correct.
7. Go to Administration > Table settings to ensure you can hide that column, and other columns in the table.

Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 15157: (QA follow-up) Some more changes
Marcel de Rooy [Fri, 3 Nov 2023 09:33:39 +0000 (09:33 +0000)]
Bug 15157: (QA follow-up) Some more changes

Renamed some vars. Removed unused $success.
Extended die statement.
Added Modern::Perl.

Added verbose parameter.
Added some logic around the confirm parameter. Making it possible
to run the script in 'dry' mode.
Print totals at the end.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 15157: Add my $amount and fix options
Emmi Takkinen [Wed, 2 Feb 2022 13:32:00 +0000 (15:32 +0200)]
Bug 15157: Add my $amount and fix options

Variable my $amount was missing. Also option
amount has to be declared as integer and
option confirm is no longer string.

Sponsored by: Koha-Suomi Oy

Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
[EDIT] Run perltidy to resolve one line.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 15157: (follow-up) Add ability to set lower limit
Martin Renvoize [Fri, 21 Jan 2022 16:21:29 +0000 (16:21 +0000)]
Bug 15157: (follow-up) Add ability to set lower limit

Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 15157: Cronjob to debar Patrons with unpaid accountlines
Olli-Antti Kivilahti [Mon, 9 Nov 2015 11:19:07 +0000 (13:19 +0200)]
Bug 15157: Cronjob to debar Patrons with unpaid accountlines

If your library wants to debar all Borrower who haven't paid
their fines by the end of the year, this script will do that
trick :)

You can give the message from a file if the cronjob runner
doesn't deal with quotes, or as a command-line parameter.

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 15157: Update script

This patch updates debarrBorrowersWithFines.pl script to match
changes made in bug 15156.

To test:
1. Have patron(s) with unpaid fines
2. Run e.g debarrBorrowersWithFines.pl --confirm -m "This is a description of you bad deeds"
(test other options too)
3. Confirm patron(s) with fines has been debarred with the explanation

Sponsored-by: Koha-Suomi Oy
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 15157: Modernise and Update for bug 15156

This patch updates the script to use filter_by_amount_owed, renames
it to debar_patrons_with_fines.pl and moves it to the cronjobs
directory whilst also adding a copyright notice and POD.

We could add a series of options to the script to allow more fine
grained control.

Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
[EDIT] Run perltidy to resolve three lines.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 17617: DBRev 23.06.00.067
Tomas Cohen Arazi [Wed, 8 Nov 2023 14:31:25 +0000 (11:31 -0300)]
Bug 17617: DBRev 23.06.00.067

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 17617: Unify DBRev
Tomas Cohen Arazi [Wed, 8 Nov 2023 14:28:32 +0000 (11:28 -0300)]
Bug 17617: Unify DBRev

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 17617: Confirmation email to patron when hold is placed
Aleisha Amohia [Thu, 26 Oct 2023 21:06:56 +0000 (21:06 +0000)]
Bug 17617: Confirmation email to patron when hold is placed

This enhancement adds a new notice HOLDPLACED_PATRON that will be sent to a patron when a hold is placed for them. It depends on the new system preference EmailPatronWhenHoldIsPlaced to be enabled.

To test:
1) Update database and restart services
2) Go to Koha Administration -> System preferences and search for the new EmailPatronWhenHoldIsPlaced syspref. It should be disabled by default - leave it disabled for now.
3) Search for a record and go to the Holds tab. Place a hold for your patron.
4) Go to your patron's account and go to the Notices tab. Confirm the HOLDPLACED_PATRON notice was NOT queued.
5) Enable the EmailPatronWhenHoldIsPlaced syspref.
6) Repeat steps 3 and 4. Confirm the HOLDPLACED_PATRON notice WAS generated and queued.
7) Confirm tests pass t/db_dependent/Holds.t

Sponsored-by: Fire and Emergency New Zealand
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 17617: Unit tests
Aleisha Amohia [Thu, 26 Oct 2023 21:06:35 +0000 (21:06 +0000)]
Bug 17617: Unit tests

Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 17617: Add HOLDPLACED_PATRON notice
Aleisha Amohia [Thu, 26 Oct 2023 02:37:01 +0000 (02:37 +0000)]
Bug 17617: Add HOLDPLACED_PATRON notice

A HOLDPLACED notice exists and is used by the emailLibrarianWhenHoldIsPlaced function, but libraries may want to use different wording when emailing patrons.

Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
11 months agoBug 17617: EmailPatronWhenHoldIsPlaced system preference
Aleisha Amohia [Thu, 26 Oct 2023 02:02:12 +0000 (02:02 +0000)]
Bug 17617: EmailPatronWhenHoldIsPlaced system preference

Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>