Phil Ringnalda [Thu, 28 Mar 2024 22:02:38 +0000 (15:02 -0700)]
Bug 36461: Advanced editor should disable RequireJS timeout with waitSeconds: 0
We aren't actually doing any error handling with the RequireJS waitSeconds
config, just leaving the advanced editor hanging on loading if it times out,
so instead we should disable it.
Test plan:
1. Set the preference EnableAdvancedCatalogingEditor to Enable
2. Load the Cataloging module home page in Firefox and open Firefox's
Web Developer Tools, and in the Network tab change from "No Throttling"
to "Regular 2G"
3. In the Cataloging page, click Advanced editor, and watch it attempt to
load for 30 seconds, followed by a setTimout error in the devtools console,
and then wait as long as you can stand for anything but the "Loading,
please wait..." to happen in the web page. Nothing ever will.
4. Apply the patch, restart, set EnableAdvancedCatalogingEditor back to
Enable, turn throttling on, load the Advanced editor again, and note that
even though it will take a minute or more to load through the throttling,
the editor does actually load.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 95394217f081a38c3fe66f21d673aa056c83414b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit c305b468218bee1ece2e396762d2360ed628d71c) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 36421: Make sure pre-controller errors are correctly logged
If something explodes in Koha::REST::V1::Auth chances are that no logging will happen.
This patch makes sure they are!
To test:
1. Make sure you do NOT have 36420 on your tree
2. Make sure you are looking at the logs:
$ ktd --shell
k$ koha-plack --restart kohadev; tail -f /var/log/koha/kohadev/*.log
3. Use Postman or similar for hitting some known endpoint. Use
the user's cardnumber instead of the userid. On a default KTD launch, the
generated user's cardnumber is '42'.
GET /patrons
=> FAIL: You get a 500 error (expected, fixed on 36420) but no useful logging found.
4. Apply this patch
5. Ctrl+c on the logs and re-run the command
6. Repeat 3
=> SUCCESS: You get a 500, but you also get the exception information logged!
7. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[OK] prove t/db_dependent/api/v1/items.t t/db_dependent/api/v1/unhandled_exceptions.t Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e518e0be2c97782997037383223e57ce2e196df4) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 0705360fc8dd81f1c09e92859a200bb28c10c643) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Wed, 6 Mar 2024 00:02:31 +0000 (00:02 +0000)]
Bug 36227: Add warning when item group has no holdable items
To test:
1. Enable EnableItemGroups and EnableItemGroupHolds
2. Find a bib and add an item group but do not attach any items to the item group.
3. Place a hold from the staff interface.
4. Under Hold next available item from an item group you see the option for your item group, select it and place the hold.
5. It's a hold that can not be filled
6. APPLY PATCH
7. How on the hold page under Hold next available item from an item group there is a 3rd column called 'Holdable items'.
8. Your item group, without any items, should have a disabled radio button and a warning "No holdable items in this item group."
9. Add items to your item group.
10. Now on the hold page in the new 'Holdable items' you should see links for each item, make sure those links work.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 29873200dfdb0ca0956095674dab440e1ff36d0d) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit e3318be45811fa8914c4dcc15e4b9cfdc92dc950) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When the user clicks on a hidden tab, 'shown.bs.tab' is triggered and
then another click event is triggered. And because the table was loaded
on tab click, it was loaded twice.
Visually it could have caused the rows to be duplicated (it was random,
probably due to timing, network latency, ...)
I don't know why we need to trigger a click in this case, but removing
this will probably break something else, so the fix here is to load the
table on 'shown.bs.tab' event instead of 'click'
This patch also contains a small fix in refreshReturnClaimsTable which
was reloading the table right after the table initialization.
Test plan:
1. Check out an item, and in the checkouts table, click "Claim returned"
2. Open the network tab of your browser's developer tools
3. Click on the "Claims" tab, verify that only one call is made to
svc/return_claims
4. Verify that the claims table is displayed correctly
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5783d01af00a5bf21527c81a05252d99a2a14e9a) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 4183ec10c0ecab8f9c6d0bf1f2360cef3be30ff7) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
We needed to call getAll instead of get to fetch all the vendors
Test plan:
Have more than 20 vendors and create/edit an agreement.
Notice that the vendor list contains all the vendors
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Matthias Le Gac <matthias.le-gac@inlibro.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 17b134fcb982768541b66f327ba301e06a727337) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit f353bd8d969800c0320b13510fce27d0583d9fab) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch corrects the default UNIMARC bibliographic framework to
place all the 4XX subfields in tab 4.
To test:
1. Go to Administration > MARC Bibliographic framework test
--> There should be errors indicating subfields from 4XX fields
are in tabs 3 and 4
2. Apply patch and reset_all
3. Redo step 1
--> It should now say that all subfields for each tag are in the
same tab (or ignored)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 49a7950f38729c54196fbb839a170ce1f958ae6d) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 676d285a20274d82400fb6a988acf2051c4ff1f9) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Brendan Lawlor [Fri, 22 Mar 2024 17:25:20 +0000 (17:25 +0000)]
Bug 36371: Check if patron attribute is defined in circ-menu.inc
This patch changes the conditional that determines if a patron attribute is displayed in the patron brief info. Instead of checking the value of the attribute we should check if the attribute is defined.
To test:
1. Create a patron attribute, eg. party_mode, check 'display in patron's brief info' and tie to the YES_NO authorised value.
2. Find a patron and set your attribute to Yes
3. Confirm you see the attribute and its value both in the "Additional attributes and identifiers" section of the patron detail page and in the patron brief info area
4. Set your attribute to No
5. Confirm you see the attribute and its value in "Additional attributes and identifiers" but it no longer shows in the brief info
6. Apply patch and restart_all
7. Notice that your attribute now displays in the brief info, such as Party mode: No
8. Set the attribute to the first empty option
9. Check the patron record brief info to confirm that the attribute does not display when the value is empty.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 93d3b0b0f75e1d7377ea31c72118ea1376f67b96) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 7be415b656b5cbc29fda66ed6336b9d853ffebb8) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 30554: Use XSLT (if enabled) in authority search cataloguing plugin
Test plan:
1. Set AuthorityXSLTResultsDisplay to a valid XSL file (see bug 30554
attachments, there is an example XSL file)
2. Go to the bibliographic record editor (edit an existing one or create
a new one)
3. Find a field linked to authorities and open the plugin
4. Start a search and verify that the results are displayed using the
XSLT output (if using the example file it should be a link saying
"Authority #<authid>")
Sponsored-by: Écoles nationales supérieure d'architecture (ENSA) Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 01e2a6d983c272120ec0579536e23eed2b046a62) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit b63d96612bc391dde655cda8dd7c533501a65f18) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 20 Dec 2023 19:06:57 +0000 (19:06 +0000)]
Bug 35621: Map ÿ to y for searching (Non-ICU)
To test:
1 - Find or add a record with title: Chevilly-Larue, L'Haÿ-les-Roses, Fresnes, Rungis [par] Sté éditions et de publicité L.F.B.
2 - Search for 'L'Hay-les-Roses'
3 - No results
4 - Apply patch, copy the file:
sudo cp /kohadevbox/koha/etc/zebradb/etc/word-phrase-utf.chr /etc/koha/zebradb/etc/word-phrase-utf.chr
5 - Restart all, Reindex
restart_all
sudo koha-rebuild-zebra -v -f kohadev
6 - Search again
7 - Success!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 1412f6c65b011ef79f955f75c812e3f7f1a9fce0) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 35c3ff27b73acb13695cffb50080512781c31415) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Laura Escamilla [Tue, 5 Dec 2023 14:57:58 +0000 (14:57 +0000)]
Bug 35034: Add parameter that links titles to their records
To recreate:
1. Select two items from the catalog and begin a merge.
2. Notice that the title of the items, their biblionumber and a
hyperlink to their MARC record is available.
3. Apply the patch and refresh the page. The biblionumber for each title
is now hyperlinked and leads to the item’s bib records.
4. Sign off and have a great day :)
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit fcbb5fceb8d759eecfbc13b88397c205f3a66eb3) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit d7bed4435bfad0fcabb5fac4ef377f383ad61eb5) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Katrin Fischer [Sun, 10 Dec 2023 15:45:28 +0000 (15:45 +0000)]
Bug 35531: Add context for translating gender option "Other"
To test:
* Apply patch
* Verify the option "Other" for gender is correctly displayed when:
* Editing a patron record in the staff interface
* Viewing the 'Details' tab of a patron in staff interface
* Triggering a "duplicate" patron warning and looking at the details
of the existing patron record
* Self registering a patron in the OPAC
* Viewing 'Personal details' tab in the OPAC for a registered patron
* If you are using ktd, run: gulp po:update --lang de-DE
* Verify string "gender" appears with the occurences of "Other"and
"Other:" in
misc/translator/Koha-messages.pot
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5f6c0f0c3e896f72c086bfacec1501ee3d72fbe0) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit c80f0882bdb097cf74a8e6d20274949506d79e3c) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Julian Maurice [Tue, 30 Jan 2024 14:13:47 +0000 (15:13 +0100)]
Bug 35943: Fix group/subgroup filtering of saved reports
Use code instead of name for filtering and escape regexp special
characters.
This patch also disables datatables' smart filtering as it is not
recommended to use with regexp filtering
https://datatables.net/reference/api/search()
Test plan:
1. Create a report in a group named "Foo + Bar" and in a subgroup named
"Baz + Quux"
2. Create other reports in group "Foo + Bar" but in other subgroups, as
well as in other groups. This is useful to see the effect of
filtering
3. Go to the saved reports page and verify that navigating between tabs
have the desired result. Same for the subgroup select
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit de91b2e5d9dbff8c43a5090828397583bd397dc1) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit de13938d0af05445d32a8989d2eb7efe939b4658) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Aleisha Amohia [Fri, 5 Mar 2021 01:05:09 +0000 (14:05 +1300)]
Bug 35768: Show 'Used in' records link for results in cataloguing authority plugin search
To test:
1. Edit a biblio record
2. Go to the 100 tab and click the plugin launcher icon for an author
tag i.e. next to 100$a
3. Search for an authority and observe the results
4. Notice that the number of times this authority has been "Used" in a
record is now a link, and clicking it does a search showing those
records.
Sponsored-by: Education Services Australia SCIS Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 553126e5a3fc59c988185a26562ab02fc2c84619) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 60e2c5d5f6a5fb7f8ae1182abff4cd1b70c1b878) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
So index is need on pseudonymized_transactions columns :
itemnumber => For join with table items
transaction_type => For filter on type issue, return ...
datetime => For filter on date, this will help cleanup script
Test plan :
1) Run updatedatabase.pl
2) Check indexes are created in table pseudonymized_transactions
3) Run SQL query :
describe select * from pseudonymized_transactions join items using(itemnumber)
where transaction_type='issue' and datetime < date_sub(curdate(), INTERVAL 30 DAY)
=> You see the 3 new indexes used in 'possible_keys'.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 0573d01eaa2da7e0b53fd24054e5a3d4e0c2b056) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 6ba45bc290685a517e8bc1967910b6744162499f) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Thu, 14 Mar 2024 15:37:21 +0000 (16:37 +0100)]
Bug 36321: Problem when dateexpiry in BorrowerUnwantedField
hen dateexpiry is in BorrowerUnwantedField it is hidden in patron edition form.
The problem is when editing an existing patron the value is re-computed with category settings, as if it where empty.
This comes from all fields in BorrowerUnwantedField beeing removed from %newdata in memberentry.pl.
Whe must skip dateexpiry.
Test plan :
1) Be sure dateexpiry is not in BorrowerUnwantedField
2) Define a patron category with enrollment period 12 month
3) Create a new patron in this category
4) Its expiration date is in now + 12 month
5) Edit the patron category to set enrollment period 6 month
6) Add dateexpiry in BorrowerUnwantedField
7) Edit the patron and save
=> Without patch the expiration date is changed to now + 6 month
=> With patch the exporation date is unchanged
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Perl-tidied.
Lucas Gass [Mon, 29 Apr 2024 15:18:26 +0000 (15:18 +0000)]
Bug 36708: Fix column index for processing No automatic renewal after
To test:
1- Find or create a circulation rule with a 'Holds allowed (total)' limit of 3 (or another number) and no value in 'No automatic renewal after (hard limit)'
2- Select to edit the rule, and note that 'No automatic renewal after (hard limit)' box in the editing line is now populated with a date
3- Note also that 'Holds allowed (total)' is empty in your editing line
4- If you save your edits without clearing the new 'No automatic renewal after (hard limit)' date, it will save as part of the rule. Also, 'Holds allowed (total)' will save as Unlimited unless you re-add your numerical value.
5- APPLY PATCH
6- Try again, the values should save corrected and not erroneously fill the No automatic renewal after (hard limit) column.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e3a04f73a22b46af1a68f221dcaa6db77017d76d) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Martin Renvoize [Tue, 16 Apr 2024 17:22:41 +0000 (18:22 +0100)]
Bug 36612: Add public_read_list to Koha::Ticket
Without the public_read_list to define which fields should be accessible
from the public endpoints we will always return a 500 from the API on
otherwise successfull additions of tickets via the OPAC.
Test plan
1) Enable OPACCatalogConcerns
2) Login to the OPAC and "Report a concern"
3) Note the error message in the UI "There was an error when submitting
your concern, please contact a librarian."
4) Confirm that the concern is actually created regardless
5) Apply the patch here and restart plack
6) Submit another 'Report a concern' and now note the success message
"Your concern was successfully submitted."
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 834fc10650779c71b6608ab01ef0e54bd9dd4746) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit d6cf0250a907def14c55f9582ee170b5fa47ee51) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Emily Lamancusa [Fri, 10 May 2024 18:01:59 +0000 (14:01 -0400)]
Bug 36832: (bug 36791 follow-up) Allow authid=0
To test:
1. Go to the Authorities module and do a Z39.50 search that will return
results (e.g. a general subject heading)
2. Import an authority record from the results
--> Confirm that the record is imported into the editor
3. Authorities > New, replace it via Z39.50, confirm it's imported
4. Authorities > New, fill the required fields, confirm it saves
5. Edit an existing authority, replace it via Z39.50, confirm it saves
6. Edit an existing authority, replace authid=nn in the URL with a
number that doesn't exist like 1000000, confirm you get a 404 page
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Janusz Kaczmarek <januszop@gmail.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 1aba01adb4ff61c6af77af6b42f13d29d55df4f2) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit aa7bea04c43080e33843b0454140c674d5fef6a2) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 36791: Koha explodes when trying to edit an authority rec. with an invalid authid
When trying to open the authority editor with authid=<invalid_authid>
(e.g. a deleted authid) Koha explodes with a message:
Can't call method "authtypecode" on an undefined value at
/kohadevbox/koha/authorities/authorities.pl line 556
This this because authtypecode method is called on the result of
->find without verifying that it was succesful.
Test plan:
==========
1. Try to edit an auth rec. giving as a authid (in URL) a non-existing
authid, e.g. in ktd, with standard ktd test data:
http://your_ktd:8081/cgi-bin/koha/authorities/authorities.pl?authid=100000
Koha should explode with the message:
Can't call method "authtypecode" on an undefined value at
/kohadevbox/koha/authorities/authorities.pl line 556
2. Apply the patch; restart_all.
3. Repeat p. 1. You should get the 404 error page.
Sponsored-by: Ignatianum University in Cracow Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 18843cabdb1697fda2eb2d9c3c7f96b58f277813) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit b9ba92c1537435ee9906f72770680c985083645a) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Emily Lamancusa [Tue, 19 Mar 2024 18:14:27 +0000 (14:14 -0400)]
Bug 34972: Remove GetOtherReserves
GetOtherReserves attempts to set the waiting/transit status for the next
hold on the list when applicable, but in practice it either leaves the
hold state unchanged, or sets the itemnumber without setting the found
status (erroneously converting bib-level holds to item-level holds).
The latter situation only occurs when the user has been prompted to
confirm, cancel, or revert the hold, and is able to ignore the prompt.
In those situations, the hold's state should not change.
GetOtherReserves does not need to change the hold state, and it does not
do so correctly. Besides that, it does not do much other than call
CheckReserves, and is only used in 3 places.
This patch removes GetOtherReserves, and refactors returns.pl and
C4::Reserves::ModReserveCancelAll to call CheckReserves directly instead.
To test:
1. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
2. Check in an item from that record to fill Patron A's hold
3. Set the hold's expiration date to yesterday by accessing the database
in the command line:
- In a ktd shell prompt, open the db client with koha-mysql kohadev
- UPDATE reserves
SET expirationdate = DATE_SUB(CURDATE(), INTERVAL 1 DAY)
WHERE borrowernumber = <Patron A's borrowernumber>
4. Go to Circulation > Holds Awaiting Pickup, and find the hold in the
"holds waiting past their expiration date" tab
5. Click the "Cancel hold" button in the Actions column next to the hold
(do not check in the book)
6. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
7. Cancel Patron B's hold
8. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
9. Check in an item to fill Patron A's hold
10. Repeat steps 3-5 to expire and cancel Patron A's hold
11. Return to the Holds tab of the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold, and there is no
"Revert transit status" button
12. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
13. Check in an item from that record to fill Patron A's hold
14. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
15. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
16. Click "Ignore" on the modal for Patron B's hold
17. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
18. Apply patch
19. Repeat steps 1-6
--> Note that Patron B's hold is still a bib-level/"next available" hold
20. Repeat steps 7-11
--> Note that Patron B's hold is still a bib-level/"next available" hold
21. Repeat steps 12-17
--> Note that Patron B's hold is still a bib-level/"next available" hold
Make sure correct behavior is unchanged:
22. Cancel Patron B's hold
23. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
24. Check in an item from that record to fill Patron A's hold
25. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
26. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
27. Click "Print slip, transfer, and confirm" on the modal for Patron B's hold
--> Confirm that the information on the slip is correct
--> Confirm that the hold is correctly put in transit
22. Set HoldsAutoFill and HoldsAutoFillPrintSlip to "Do"
23. Place a bib-level hold for the logged-in library
24. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
25. Place a bib-level hold for a different library
26. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly put in transit
27. Change the logged-in branch to match the hold pickup location
28. Check the item in
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
29. Repeat steps 22-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm that Patron B's hold is correctly put in transit
30. Cancel Patron B's hold
31. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
33. Repeat steps 24-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm Patron B's hold is correctly set to Waiting
To test:
1. Apply this patch only
2. prove t/db_dependent/Koha/Holds.t
--> Tests pass
3. Apply the other patch
4. prove t/db_dependent/Koha/Holds.test
--> Tests still pass
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit d71f5272021b54849e5854d3a7b8ecb1f30d9414) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit c4661a1660f2a72393fc75ba83bb7b223e42b078) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 3 Apr 2024 20:35:46 +0000 (20:35 +0000)]
Bug 36508: Refresh patron object when updating category
To test:
1 - Find a ptron, I sued #45 in KTD, note their category
2 - Update them from one category to another using finesunder:
perl misc/cronjobs/update_patrons_category.pl -f ST -t S --finesunder=5.00 --where "me.borrowernumber=45" -v -c
3 - Check their modification log (I told you to enabled BorrowersLog,
right?)
4 - See many fields reported changed
5 - Apply patch
6 - Repeat, but change the to and from options
perl misc/cronjobs/update_patrons_category.pl -f S -t ST --finesunder=5.00 --where "me.borrowernumber=45" -v -c
7 - Note only one column changed in the logs
8 - Ask for unit tests
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit cae2efd69d8ad63822914377733f9819889a0ec1) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 2ff0a6578311f029def133446c99a7c7576b8ae0) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 25 Apr 2024 16:20:53 +0000 (16:20 +0000)]
Bug 36508: Unit tests
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8f359aa72c46eaa493e817d4d099b6548846edf0) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 9659b8cddf28ce3f45d0316fa86bcf8aecc1c16e) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Pedro Amorim [Thu, 11 Apr 2024 10:40:16 +0000 (10:40 +0000)]
Bug 36563: Turn into array only if required
Test plan, apply first patch:
1- Visit item search:
http://localhost:8081/cgi-bin/koha/catalogue/itemsearch.pl
2- Set "Home library" -> "is not" -> "Centerville". Notice you get items
from Centerville.
3- Apply second patch, repeat step 2, notice you now don't get items
from Centervile.
4- Test other use cases, like 'is' and 'is not' for multiple choices
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit eae74ed6d9935ee7247ccd85f9a1d502755ca338) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 0513ffa58e512d149a44a9d4bd4750d182816e48) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 10 Apr 2024 10:04:18 +0000 (12:04 +0200)]
Bug 36563: Dirty fix
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 492d7be2ccba07f47771184fd5cc903383abb63b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit d8ca12b404da1833ed7c8ae51ab69af6086705a6) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Error happens also when one tries to open patrons checkouts from detail page.
Koha doesn't die but table just keeps loading. Solution is to add C4::Reserves
before CheckReserves when it's called from Circulation.pm.
To test:
1. Apply this patch.
2. Try to check out and check in item.
=> Confirm both operations are succesfull.
3. Attempt to open patrons checkouts from patron detail and checkout page.
=> Table should load
Also prove t/db_dependent/Circulation.t.
Sponsored-by: Koha-Suomi Oy Signed-off-by: BabaJaga <babajagawgoglach@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 80beaf875b3645034f5dda37bfadf51a038859cc) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit d26306ed328c1be1c59f33515caa699071a4aacc) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 33832: Allow updating username without changing password on member-password.pl
This patch updates the change password page on the staff interface to
allow for changing the patron's username without changing the password.
If the new password is an empty string we can skip setting the patron's
password and sending the new password to the template.
Test plan:
1. From a patron record tool bar click 'Change password'
2. Notice that if you try to change the user's name without also
changing the password the page just reloads and nothing happens
3. Apply patch and restart_all
4. From the patron record click 'Change password' again
5. Set the user's new username and password eg. '1234Abc' and click
'Save'
6. Confirm that you can log in to the OPAC with the user
7. Return to the patron record and click 'Change password' again
8. This time change just the 'New username field' and click 'Save'
6. Notice that the username is updated
7. Confirm you can log into the OPAC with the new username and the
original password '1234Abcd'
8. Make sure that the change password form still validates passwords
for length and matching errors etc
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e26fc0a3d5a83a7b22f0c3907a98d470b0e2443d) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 34e17b5abad1bac29bc13155cedbe11b7d7fc1ba) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 8 Feb 2024 20:27:14 +0000 (20:27 +0000)]
Bug 36053: Correct input name for item replacement fields
To test:
1 - Follow test plan and use sample record from bug 35912 ( or similar)
2 - Confirm that when the order is saved the replacement price is $0.00
3 - Apply patch, restart_all
4 - Delete previous orders, and stage and add to basket again
5 - Confirm that upon adding orders to basket the replacement price is saved correctly
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 94da493d0eaaec80e42258ec421eb7c5ca1a0dd2) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit f53018dce0fa3db1afacb5914e8ee2e57794296d) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Pedro Amorim [Fri, 9 Feb 2024 09:55:35 +0000 (08:55 -0100)]
Bug 34886: Comment failing tests
These tests highlight the fact that the 'place hold' button visibility in the
search results page **does not** match the 'place hold' button visibility in
the detail page, given the same conditions.
Since that this is a known behavior, these tests should be commented out as they
are failing by design.
Pedro Amorim [Thu, 1 Feb 2024 15:42:12 +0000 (14:42 -0100)]
Bug 34886: Add selenium tests
Tests added to cover different use cases and combinations of circulation rules values for authenticated and unauthenticated users
At the moment, 2 tests are failing, documented on the [DO NOT PUSH] commit.
These 2 failing tests fail for the search results page but pass on the detail page counterpart. Ideally they should match, for consistency sake.
But this may be the use case "details page should be more correct, results page is always an approximation" mentioned by Nick.
More test combinations may be added in the future.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3758a8c05e05b14360560a3e351439e2c4c0364c) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 1af004161d6b13ee33becc18b5a79db13a805bfe) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 28 Sep 2023 12:27:21 +0000 (12:27 +0000)]
Bug 34886: Adjust holdability checks on opac details page
This patch tries to simplify some of the logic here to match that on the search results. When we don't have a patron, we fallback to determining if an item can be held buy determining whether there are any items that don't have holds disallowed at the all libraries level. We also remove items with non-holdable statuses like withdrawn etc (and check some system preferences)
If we don't have a patron, then we are done, however, if we do, then we need to check each item against the policies related to that patron.
This patch also removes two checks at the end:
CountItemsIssued($biblionumber)
$biblio->has_items_waiting_or_intransit
These seem to be from bug 4319 - however, those rules are checked by IsAvailableForItemLevelRequest and are only relevant when we have a patron. These checks essentially assumed 'onshelfholds' policy of 'If any unavailable' For consistency sake I think we should follow the same logic as the results page.
To test:
1 - Find a record with two items, of different types, set a 'Default checkout, hold and return policy' of 'No holds allowed'
2 - Search opac, not logged in, and verify neither the results page or details page shows the place hold button
3 - Delete that rule, make both items withdrawn
4 - Search opac, not logged in, and verify neither the results page or details page shows the place hold button
5 - Mark one item as not withdrawn
6 - Search opac, not logged in, and verify both the results page or details page shows the place hold button
7 - Log in to opac
8 - Search opac, logged in, and verify both the results page or details page shows the place hold button
9 - Place an 'On shelf holds policy' rule for that patron category of 'If any unavailable'
10 - Search opac, logged in, and verify the results and details page shows the place hold button
11 - Set the other item to not withdrawn
12 - Search opac, logged in, and verify the results page shows the place hold button, but details does not
13 - Try various other scenarios - details page should be more correct, results page is always an approximation
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 0d4f520761cead905357892f54fa33a8cb24b827) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 6c1d615394d54b0f275a45c23ee0d6a40d34a236) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Matt Blenkinsop [Thu, 8 Feb 2024 11:11:24 +0000 (11:11 +0000)]
Bug 36036: Fix misnamed location field
This patch fixes a hash reference in the template to allow the location field to display properly
Test plan:
1) In system preferences, click Search and then select the Acquisitions option from the left hand menu
2) Paste the following into MarcFieldsToOrder
price: 975$p
quantity: 975$q
budget_code: 975$h
3) Paste the following into MarcItemFieldsToOrder
homebranch: 949$a
holdingbranch: 949$b
itype: 949$y
nonpublic_note: 949$x
public_note: 949$z
loc: 949$c
ccode: 949$8
notforloan: 949$7
uri: 949$u
copyno: 949$t
price: 949$g
replacementprice: 949$v
itemcallnumber: 949$o
quantity: 949$k
budget_code: 949$l
Now save the sysprefs
4) Navigate to acquisitions and go into a basket
5) Click Add to basket and select “From a new file”
6) Download the file attached to this bug
7) Import the file and when the job is complete click “Add staged files to basket”
8) Click the checkbox next to the record to display the items
9) Inspect the value for the "loc" field - the value of "AV" from the file has not been selected
10) Apply patch and refresh the page
11) On inspection the value should now be properly selected
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c1cd6a980a7c6f862cb678aa81533b1fadc60afb) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit ea15bde9b21c603187f8e90867029ee74bdc4d31) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Owen Leonard [Thu, 8 Feb 2024 13:57:30 +0000 (13:57 +0000)]
Bug 36035: Wrong text colour in addorderiso2709.pl
This patch updates the "Order staged MARC records" page so that the
class which is added upon selection is more unique to avoid a collision
with some default DataTables styles. These classes are used in
JavaScript selectors, not for visual style.
The patch also adds some custom CSS variables to global.scss to override
the defaults for the DataTables "selected" style, in case this issue
crops up again.
To test, apply the patch and rebuild the staff interface CSS. Follow the
test plan from the bug report:
1) In system preferences, click Search and then select the Acquisitions
option from the left hand menu
2) Paste the following into MarcFieldsToOrder
4) Save the sysprefs
5) Navigate to acquisitions and go into a basket
6) Click "Add to basket" and select "From a new file"
7) Download the file attached to this bug
8) Import the file and when the job is complete click "Add staged files
to basket"
9) Click the checkbox next to the record to display the items.
- The expanded form should look correct.
10) Add one or more items to the order and confirm that submitting the
form works correctly.
To test the new default "selected" DataTables style, view a page with a
DataTable, e.g. Administration -> Libraries.
- Right-click on one of the table rows and choose "Inspect"
- Click the table row element, e.g. '<tr class="odd">'
- Double-click the class name and replace it with "selected."
- The row you inspected should now have a pale green background and text
colors should remain the same.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 27a651388dacc6faedef2c7463cfb580f0a79bbe) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit d56f9f201704fb6dff92439b518ec6df345da050) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 22 Mar 2024 13:54:03 +0000 (13:54 +0000)]
Bug 36331: (follow-up) Ignore non_priority holds when checking renewability
When changing the fetch of holds, the check for non-priority was lost - added a loop to pull those out
so the totals and checks are correct
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tidied (tcohen) Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit b7ad3364cbf8778507f7d0dbd2a0199cbe7c0cdd) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 4f4add4c039f30a69bedb75088d9eb5081db29f2) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 15 Mar 2024 13:45:58 +0000 (13:45 +0000)]
Bug 36331: Don't check reserves that an item cannot fill when checking if it can be renewed
Before this patch we get all holds on a record and see if we can fill them with available items.
This means we check to fill holds that the item in questoion may not be able to fill, especially
in the case where no holds are allowed on the item type, this is wrong
To test:
1 - Find or create a biblio with two items of different item types
2 - Make sure one item type allows holds, and the other has:
"Default holds policy by item type"
Set to "No holds allowed"
3 - Set system preference "AllowRenewalIfOtherItemsAvailable" to "Don't allow"
4 - Check out the unholdable item to a patron
5 - Set a hold for a different patron on the next available item
6 - Confirm the checked out item can be renewed (don't renew, just view the checkouts page)
7 - Checkout the other item to a third patron
8 - Confirm the first item can still be renewed
9 - Set system preference "AllowRenewalIfOtherItemsAvailable" to "Allow"
10 - Confirm the item cannot be renewed now
11 - Apply patch, restart all
12 - Confirm the item can be renewed
13 - Set the item type to a type that allows holds
14 - Confirm the item can no longer be renewed
15 - Restore the item type
16 - Set system preference "AllowRenewalIfOtherItemsAvailable" to "Don't allow"
17 - Confirm the item can be renewed
18 - Check in the item from the third patron
19 - Confirm the item can still be renewed
20 - prove -v t/db_dependent/Circulation.t - test still pass
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 9cc622be1fb267efe5202f24450f9c5acee77fd2) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit ee235cd8d4398ef7239db41737845eabca7363db) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 36329: (follow-up) Fix error message comparisson in testes
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5f7a9db93672c14efdba861373c2d330b8aee6c4) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit f805c221cf9fe138735f25568704d16cae2a97c7) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 36329: Make POST /transfer_limits/batch honor BranchTransferLimitsType
This patch adds tests for the different cases of `BranchTransferLimitsType`.
It also adds tests for the situation of the consumer sending both limit
criterias on the request.
The controller gets adjusted for this new behavior and the spec gets
documentation added about this.
Bonus: tests are added the right guidelines code, and
BranchTransferLimitsType gets mocked to avoid failures due to existing
data.
To test:
1. Apply this patches
2. Run:
$ ktd --shell
k$ qa
=> SUCCESS: All green, and tests pass!
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fixed a typo in one of the return messages
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 9760f066dd3488fe166015959aa8b526bb98daa6) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit bdeabccf3d1e9dd2edd05c4a5f82cb801382e4a6) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 506087bc1541c94b46a4f8b405b8b1c131d526b9) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit d45ed60db448789a7e165049ec2c1367b4967a00) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Tue, 19 Mar 2024 08:16:52 +0000 (09:16 +0100)]
Bug 36356: Fix rollback from FrameworkPlugin.t
rollback ineffective with AutoCommit enabled at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1651.
I have not investigated more than that. Reaching this was already the
end of a long road... (see comment 0)
Test plan:
0. Do not apply this patch
1. select count(*) from branches
Note the value
2. Run
prove t/db_dependent/FrameworkPlugin.t
=> There is a warning
3. Repeat 1.
=> There are too many libraries!
4. Apply the patch, retry 1, 2, 3
=> No warning, no library added by the tests
Julian Maurice [Thu, 25 Jan 2024 15:49:32 +0000 (16:49 +0100)]
Bug 35921: Improve perfs of acqui-home.pl when there are many budgets
When there are a lot of budgets with the same owner, most of the time of
acqui-home.pl is spent loading the same patron over and over.
This patch makes sure each borrower is loaded only once.
Test plan:
0. Do not apply the patch yet
1. Create a thousand budgets with the following command (make sure the
budget_owner_id is an existing borrowernumber):
perl -MKoha::Database -e '
my $schema = Koha::Database->schema;
my $period = $schema->resultset("Aqbudgetperiod")->create({
budget_period_startdate => "2000-01-01",
budget_period_enddate => "2999-12-31"
});
$schema->resultset("Aqbudget")->create({
budget_owner_id => 1,
budget_period_id => $period->id
}) for (1..1000)
'
2. Measure the time it takes to load acqui/acqui-home.pl (do it several
times and keep the average time)
3. Apply the patch
4. Repeat step 2
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 24b33936a526187e17719294e236f186aec46d50) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit b37e510eb8c2b280a69dfb60c427c60d1d53b041) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Fri, 8 Mar 2024 15:06:11 +0000 (16:06 +0100)]
Bug 36149: Unset userenv from middleware
The userenv (logged in user's info) are stored in
$C4::Context->context->{activeuser}, which persists in plack worker's
memory.
It's really bad in theory as we are not cleaning it before or after the
HTTP request, but only when set_userenv is called (what we are doing
commonly in C4::Auth::get_template_and_user).
If C4::Context->userenv is called before set_userenv we should get undef,
not the userenv from the previous request!
In practice this should not be a problem, but well... who really knows?
This patch suggests to have a middleware to deal with removing the
userenv at the beginning of each request (maybe it should be after, right? - FIXME).
To test:
1 - Edit /etc/koha/sites/kohadev/koha-conf.xml to set <plack_workers>1</plack_workers>
2 - Edit about.pl and add a line after: CGI->new:
warn Data::Dumper::Dumper( C4::Cointext->userenv() );
3 - tail -f /var/log/koha/kohadev/*.log
4 - View about.pl in staff interface, should get a "somethign's wrong" warning
5 - Reload, you get current user info
6 - Open an incognito tab, sign in as a different user and click some stuff
7 - Reload about.pl in other window
8 - You get the opac user info
9 - Apply patch
10 - Edit /etc/koha/sites/kohadev/plack.psgi and add the middleware after "RealIP":
enable "+Koha::Middleware::UserEnv";
11 - Restart all
12 - Reload about.pl - you get a "Something's wrong" warning
13 - Click things in opac on incognito window
14 - Reload about.pl - only "Something's wrong" - you no longer see any user info
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 576e7e09fdca703f76c0d10ae55eebf12ee1fdf4) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 3dd1cdd74ff004d1d218366a377fc91d8ae4e21d) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 20 Mar 2024 07:35:29 +0000 (08:35 +0100)]
Bug 19613: Use the 'note' profile
WNC amended patch: tidied
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 3cb586b72165bcbd029948f46407359be9d5e9a8) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 55931114b62557dfbbe01e7bcf0cd150b5733262) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 83db8696ca7a83aba224a0ab645f03447a96887b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 383984a0164adabc79e91ad11e2e930f5e070ed9) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 20 Mar 2024 07:34:09 +0000 (08:34 +0100)]
Bug 36328: Add a separate 'note' profile
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 7a626d8d870039330889d6e48c3ae5ba848d85e9) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit fb1c48da9a06ff30f8aa5bafb1bf1d95cfd58ea2) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Fri, 15 Mar 2024 10:40:57 +0000 (11:40 +0100)]
Bug 36328: Add test
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit b315c0f2630ccd738fc811e13d1e95b11d3c8df1) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 11ea420b54ee8ec791b3f6d688a7366acccb42fa) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Fri, 15 Mar 2024 10:39:33 +0000 (11:39 +0100)]
Bug 36328: Add p span div to Scrubber
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit ca64e4f6f30b172d86184c61134f5f29713863d2) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit de4053a0f30431a5560baf28e21547873b71bf55) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Owen Leonard [Tue, 9 Apr 2024 15:55:57 +0000 (15:55 +0000)]
Bug 36511: Some scripts missing a dependency following Bug 24879
These files needed the addition of 'use C4::Auth qw( check_cookie_auth
);'.
To test, apply the patch and restart services.
- If necessary, enable the LocalCoverImages system preference.
- Open the browser console and then the "Network" tab. You can click
"Images" to filter for the correct kind of request.
- Perform a catalog search. After the search has loaded, check that
there are no 500 errors in the Network tab.
- Go to Cataloging -> Label creator.
- If necessary, create a label batch and add some items.
- Export your batch and test both the "Download as CSV" and "Download as
XML" links. Both should trigger the correct download.
- Go to Serials -> Claims, and select a vendor with late issues.
- Select all late issues and click "Download selected claims" at the
bottom of the page.
- Your CSV file should download correctly.
The file acqui/check_uniqueness.pl has been corrected as well but I'm
not sure how to test it!
Signed-off-by: danyonsewell <danyonsewell@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 747f5132311ea51ea6babbfc92a775ac0c67f93a) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 01b22fb71d30f56d3102837b5c9b4cfdacbc9e76) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Mon, 18 Mar 2024 15:32:57 +0000 (16:32 +0100)]
Bug 36323: Move koha_perl_deps.pl to misc/devel
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Thu, 14 Mar 2024 15:17:55 +0000 (16:17 +0100)]
Bug 24879: Adjust tests
Installer scripts cannot be run from the UI:
debian/templates/apache-shared-intranet.conf:RewriteRule ^/cgi-bin/koha/(C4|debian|etc|installer/data|install_misc|Koha|misc|selenium|t|test|tmp|xt)/|\.PL$ /notfound [PT]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Fri, 15 Mar 2024 09:12:41 +0000 (10:12 +0100)]
Bug 31988: Remove reports/itemtypes.plugin
This "plugin system" is only used for the itemtypes report. We can
simply remove the reports/manager.pl script and this plugin in favor of
a dedicated report.
Test plan:
Same behaviour expected before and after this patch
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Andreas Jonsson [Thu, 7 Mar 2024 09:12:25 +0000 (09:12 +0000)]
Bug 36244: Do template toolkit processing first
To avoid injection of template toolkit code
from database fields that are controlled by
untrusted sources.
Test plan:
* review subtest 'Template toolkit syntax in
parameters' in t/db_dependent/Letters.t
* Run the unit test:
prove t/db_dependent/Letters.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Andreas Jonsson [Thu, 7 Mar 2024 09:07:49 +0000 (09:07 +0000)]
Bug 36244: Unit test for tt syntax in parameters
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Julian Maurice [Thu, 1 Feb 2024 08:15:23 +0000 (09:15 +0100)]
Bug 35960: Use .val() instead of string concat to prevent potential XSS
Test plan:
1. Log out
2. Go to /cgi-bin/koha/mainpage.pl#somestring"with<html>char
3. Open the brower's inspector and find "auth_forwarded_hash" input
4. Make sure the value attribute is there and corresponds to the URL's
fragment. It should be URI-encoded.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Tue, 23 Jan 2024 17:53:39 +0000 (17:53 +0000)]
Bug 35800: Remove item.can.be.edited check
To test:
APPLY PATCH
1. Check out an item to a patron from library A
2. Give permissions to a patron from library B
(example of a circulation staff account)
- circulate
- catalogue
- borrowers ( including view_borrower_infos_from_any_libraries )
- reserveforothers
- updatecharges
- suggestions
- lists
- clubs -> enroll
3. If necessary, change the username and password of that staff member in order to be able to log in
4. In a private browser window, log in as the staff member
5. View the record with the checked out item
6. You should see the name/cardnumber of the patron the item is checked out ot.
7. Turn off the view_borrower_infos_from_any_libraries for this patron.
8. Now on the record detail page you should see text like `Checked out to A patron from library Midway : due 01/28/2024`.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e8c0438d87468d7a5638a3463817aff5c9d75e85) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 4c38b7140aa7b33d170ee84be17c890b811b6ca1) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 6 Sep 2023 15:48:12 +0000 (15:48 +0000)]
Bug 29522: [alternate] Skip relinking bibliographic records when merging authorities
If autolinking is enabled, there are scenarios where the authorities merge process
updates the record, then sends it to ModBiblio which then AutoLinks the record, undoing
the changes in the record (as the 'from' authority is not removed until the process is complete)
This patch simply disables the autolinking process when merging authorities
To test:
Set system preferences
AutoCreateAuthorities = don't generate
RequireChoosingExistingAuthority = don't require
AutoLinkBiblios = Do
CatalogModuleRelink = Do
LinkerKeepStale = Don't
LinkerModule = first match
LinkerRelink = Do
1. Create an authority record
1.1. Go to Authorities
1.2. Click on "New authority" and choose an authority type (I chose Corporate name)*
1.3. Fill in the mandatory fields (000, 003, 005, 008, 040)
1.4. In tab 1, click on the label of the main heading (110 for Corporate name)
1.5. Fill in subfield
1.6. Copy content of subfield
1.7. Click on "Save"
1.8. Note the authority record number
2. Duplicate the authority record
2.1. Click on "Edit" and choose "Edit as new (duplicate)"
2.2. Click on "Save"
2.3. Click on "No: Save as new authority"
2.4. Note the authority record number (should be the number from step 1.8 +1)
3. Link one of the authority records to a bibliographic record
3.1 In another tab, do a catalog search
3.2. Click on "Edit record" under one of the search results
3.3. Go to the relevant tab (for corporate name, I used field 710 in tab 7)
3.3.a. If there are no empty fields for that tag, click the "Repeat this tag" button (two rectangles)
3.4. Paste the text previously copied in subfield
3.5. Click on "Link authorities automatically" at the top of the page
3.6. Note the authority record number in subfield
--> The linked authority record should be the first authority record (step 1.8)
3.7. Click on "Save"
4. Merge the two authority records, keep the one that is not linked to the bibliographic record
4.1. Go back to the tab with the authorities
4.1. Go to Authorities
4.2. Search for the aurhorities previous created
4.2. Click on "Actions" and choose "Merge" for both records
4.3. Select the record number that is NOT linked to the bibliographic record
4.4. Click on "Next"
4.5. Click on "Merge"
5. Check the bibliographic record
5.1. Go back to the tab with the bibliographic record and refresh the page (Ctrl+F5)
5.2. Hover the mouse cursor over the name or term, without clicking
5.3. Note the record number that appears at the bottom of the screen
--> The record number was not changed
6. Apply the patch
6.1. Run prove t/AuthoritiesMarc_MARC21.t
6.2. Repeat Previous steps 1, 2, 3, 4, 5
--> The record number is change
Signed-off-by: Barbara Petritsch <barbara.petritsch@wienmuseum.at> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 1b9371beb33dae4b661768609dca9930a91bfb56) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 10661f70ff3462ffac73afa6a6aa44d1d0a8f123) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
As mentioned on bug 36329, this endpoint is only used with one of this
parameters:
* item_type
* collection_code
The other will be NULL both on the DB and the (deserialized) request
body. For the data from the DB, the author added `|| q{}` but missed to
do so on the incoming parameters when generates the hash key.
This generates the following warnings when using from the UI:
[2024/03/15 11:42:51] [WARN] Use of uninitialized value in sprintf at /kohadevbox/koha/Koha/REST/V1/TransferLimits.pm line 146.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 03b0f31b9e63ce314c333ac6ffd68587a609e587) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit fa2e164f240a9e040c0e044c39dac6c613cb7b27) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Thu, 14 Mar 2024 13:39:56 +0000 (14:39 +0100)]
Bug 36277: Improve algorithmic complexity of batch_add
The 2 nested loops are terrible in term of algorithmic complexity.
Especially if we are fetching from there.
The goal of this patch is to fetch all the limits outside of the loop.
If you have 100 libraries, it will remove 100^2 - 1 fetches!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 202628342ab9397e8b15aa5e62c0aaa041d3c8a0) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 372adf555d579c290355ff33f891cd205dc0bfac) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Thu, 14 Mar 2024 13:06:28 +0000 (14:06 +0100)]
Bug 36277: Do not fetch the whole library list
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 14388b6478858e298a9f0de104d5e839bc8cb430) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 4c56374272bb458ee0497f9efd42c3db54723fcf) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Emily Lamancusa [Mon, 29 Jan 2024 20:25:19 +0000 (15:25 -0500)]
Bug 35934: Correct missed case of switching items.transfer to transfer in detail.tt
To test:
1. Put an item with no holds/recalls in transit (manually or by checking
it in at a branch other than its homebranch to trigger a ReturnToHome)
2. Go to the item's bib record
--> Note that the item's status will display as something like,
"In transit from X to Y since 01/29/2024 Available"
3. Apply patch and refresh the page
--> Note that item now shows only the transit status, but not "Available"
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 687963b016bb9e3f74abebc64c830e53ab4d1e50) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit f726c7ebfe0102ffaad49ffd73297971cb1a5248) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Tue, 5 Mar 2024 16:00:39 +0000 (16:00 +0000)]
Bug 36224: Remove unused spsuggest from templates
To test:
-APPLY PATCH
-Review the OPAC results and staff interface results pages.
-Nothing should change, it would be impossible to end up inside of the [% IF koha_spsuggest %] condition because there is nothing like that in the scripts!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e07c6d072977b9e52dc2153fd36f03601e161c1a) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 3e0bab0bb927d20b60679ebf1606859d78495d04) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Laura Escamilla [Mon, 11 Mar 2024 14:43:26 +0000 (14:43 +0000)]
Bug 36292: Fixed 'See all charges' hyperlink for guarantees/guarantor linked charges
To test:
1. Add a guarantee / guarantor relationship for two patrons.
2. Add a manual fee to the guarantees' account.
3. Go to the guarantor's account and view the 'Details' tab. Under contact information there should be a Guarantees section. There you will see the charges for your guarantee. Click on ‘See all charges’. The link leads you no where.
4. Apply the patch and restart_all
5. Refresh the guarantor’s page and click on ‘See all charges’ again. This time it will take you down to the ‘Guarantees’ Charges’ panel.
6. Sign off and have a great day! :D
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e2d54b1279b65507596ca3a08d6b44d1b15fe2b8) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit c8d97a97a10983f44b697bbb4c03e4707999388d) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Tue, 12 Mar 2024 10:18:18 +0000 (11:18 +0100)]
Bug 36298: In patrons search fix road type with authorized value
In new patrons search via API, the road type code is displayed in patron address instead of authorized value description.
Also road type is missing a space separator in DE and FR format.
Test plan :
1) Create two entries in authorized value category "ROADTYPE" :
R1 "Road"
R2 "Street"
2) Edit a patron (ie Delgado, Floyd) to set road type to "Road"
3) Perform a search on patrons (click on letter D)
4) Check you see in address "Road" and not "R1"
5) Edit authorized value category "ROADTYPE" to delete entry "R1"
6) Perform a search on patrons (click on letter D)
7) Check you see in address "R1"
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3c0ac4cb9a4290c770aa8e4837b6d639b49c97e9) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 72e78f72a3e701b574db13f7ad0ff161e00029ef) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Fri, 8 Mar 2024 21:32:21 +0000 (21:32 +0000)]
Bug 35796: Properly set patron_expiration value
To test:
1) Set an expiration on the password in a patron account and save.
2) Go to patron details (moremember.pl) and confirm the password has an expiration.
3) Edit the patron account without touching anything and save the account.
4) Go back to patron details (moremember.pl) and note that the expiration on the password has been removed.
5) APPLY PATCH
6) Try 1 - 4 again except this time password expiration is not removed.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 60dcb2b0775ba4d47502e68af5d4aa3c127f0f81) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit e5cdf2bbc17e30d563187a4948518fdb2056191e) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
projects / koha.git / log