Elliott Davis [Wed, 10 Oct 2012 19:21:22 +0000 (14:21 -0500)]
Bug 7131: teach MARC import how to overlay items
When staging biblios with items attached you previously had only two
options, add or don't add.
This patch adds a third option to replace an item record if a match is
found on itemnumber or barcode, else it adds the item.
Test Plan:
1) Stage a file of biblios with items attached.
2) Import the batch into the catalog.
3) Run the indexer so the matcher will match
4) Modify the item data for at least one bib in the file
5) Re-stage the file with the item matching option set to "Replace
items if matching bib was found"
6) Let the indexer run again
7) You should see updated item information after the overlay
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Henry Bankhead <hbankhead@losgatosca.gov> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10733: Follow up - unset variables from koha-sites.conf if USE_MEMCACHED=no
As configuration variables from koha-sites.conf overwrite the ones in the
koha-create script we need to unset them in case we have USE_MEMCACHED="no".
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the koha-create script adjust the koha-conf.xml file
with the proper string substitutions to enable the use of memcached
for the created Koha instance.
It adds three option switches that control this:
--use-memcached (defaults to "no")
--memcached-servers "host1:port1,..." (defaults to '127.0.0.1:11211')
--memcached-prefix "desired_namespace prefix" (defaults to 'koha_')
It respects the current schema configuration schema, where configuration
values are pondered like this:
koha-sites.conf is read for USE_MEMCACHED, MEMCACHED_SERVERS and
MEMCACHED_PREFIX.
Note: the docs discourage setting user's own namespace prefix.
Using memcached is off as the default. The relevant configuration
variables will remain empty if the user doesn't pass --use-memcached
to the command. It matches the current behaviour.
To test:
- Apply the patch
- Build your own packages and install them on a test server
a) Create a new instance without using the new switches like:
$ koha-create --create-db memctest
- Check that /etc/koha/sites/memctest/koha-conf.xml contains:
* Empty <memcached_servers> tag.
* Empty <memcached_namespace> tag.
b) Play with the possible combination of option switches
(Note that the code defaults to empty and will remain like that if
--use-memcached is not used, so less tests...)
- Check the koha-conf.xml and /etc/apache2/sites-enabled/memctest
file reflect the chosen options.
c) Run
$ koha-create --help
- It should advertise this addition accordingly.
d) Run
$ man koha-create
- Man page for koha-create should provide good information on the new
switches behaviour
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10733: add 'memcached' as suggested dependency
Adds 'memcached' to the control.in file so the user is suggested by apt
to install it.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Wed, 9 Oct 2013 18:02:23 +0000 (14:02 -0400)]
Bug 10243: (follow-up) prevent TransportCostMatrix from overriding library holds policy
Using the TransportCostMatrix can cause the same issue. Removing the
last ditch use of the first item causes the the subroutine to continue
with the traditional matching, which will respect the hold policies.
Kyle M Hall [Tue, 14 May 2013 19:59:07 +0000 (14:59 -0500)]
Bug 10243: prevent holds queue from making transfer requests that contradict library holds policy
For some reason MapItemsToHoldRequests will, as a last ditch effort,
grab what seems to be an arbitrary available item to fill a hold request,
even if it will violate the circulation rules for holds.
In other words, even if an item matches a "Holds policy by item type"
that says "From home library", a request to transfer that item to
another library will be added to the holds queue!
Test Plan:
1) Create a record with a an item at BranchA of item type BOOK
2) Set the holds policy such that itemtype BOOK for BranchA is set
to "From home library"
3) Place a bib-level hold request for a patron with a pickup at BranchB
4) Run build_holds_queue.pl
5) You should now see a request for that item to be transfered to
BranchB, even though the rules should not allow this.
6) Apply this patch
7) Run build_holds_queue.pl again
8) View the holds queue again, that request should no longer exist
A lot of tests were just a call to a funtion without any arguments,
whereas the function expect at least one argument.
These tests were kept, but all return values are now undef when a
mandatory argument is missing, so return values are consistent.
The part where subscription periodicity is changed could not work
because of ',' appended to each key in ModSubscription call. So it's
rewritten, taking into account the new API for subscription frequencies.
This script should leave your database intact because it revert any
modification made.
Also fix some warnings in C4::Serials and in C4::Items.
And fix a typo in koha-tmpl/.../subscription-numberpatterns.tt
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors
Tested, again, without trouble.
With a suscription, tests successful.
No koha-qa errors
Julian Maurice [Fri, 22 Mar 2013 09:53:51 +0000 (09:53 +0000)]
Bug 7688: (follow-up) set firstacquidate in updatedatabase if it's not set
firstacquidate is now a mandatory field, so it must be set.
The updatedatabase process set firstacquidate value to one of:
- the planned date of the first serial for this subscription, or if not
found,
- the subscription start date.
+ auto-select the numbering pattern when modifying a subscription.
Julian Maurice [Thu, 8 Mar 2012 16:12:55 +0000 (17:12 +0100)]
Bug 7688: Change subscription numbering pattern and frequencies
Serials numbering pattern and frequencies are no longer hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This patch adds two new sql tables
(subscription_numberpatterns and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
English and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern, you can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' information.
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Squashed commits:
-----------------
Bug 7688 follow-up: Small fixes for QA
- # Subroutines::ProhibitExplicitReturnUndef: Got 1 violation(s) in
C4::Serials::GetSubscriptionIrregularities
- Bad template constructions fixed in serials/subscription-add.tt
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Translate sample frequencies for french
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Fix generating next serial when there is no 'Expected' issue
It can happen when the Expected issue is claimed. In this case the
status of the last serial is 'Claimed'
This patch change the API of GetNextSeq and GetSeq
Test plan:
- Create a subscription which starts a long time ago so that serials
automatically appear in late issues
- Receive the first serial
- Go to claims page and claim the 2nd serial.
- Go back to the subscription page and click on 'Serial collection'
- You should have 2 serials, one 'Arrived' and one 'Claimed'.
- Click on Generate Next. This should fail with a software error message
("can't call method output ...")
- Apply this patch and click again on Generate Next. A new issue must be
created with status 'Expected'.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Chris Cormack [Sun, 20 Oct 2013 18:51:29 +0000 (11:51 -0700)]
Bug 11086: (follow-up) editing the database files also
Signed-off-by: David Noe <drnoe@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes permission description in en and untranslated
installer files.
Nicole C. Engard [Thu, 24 Oct 2013 14:51:31 +0000 (10:51 -0400)]
Bug 10671: Update Reports Help
Update all of the reports related help files.
To test:
* Visit report pages and confirm that text and links
are right.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Nicole C. Engard [Thu, 24 Oct 2013 03:48:51 +0000 (23:48 -0400)]
Bug 10671: Update holds help
This patch updates the manual link in the holds help
file.
To test:
* Place a hold in the staff client
* Click the help link
* Confirm manual link works
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Nicole C. Engard [Thu, 24 Oct 2013 03:46:39 +0000 (23:46 -0400)]
Bug 10671: Update Reviews Help
This patch updates the link to the manual in the comments
moderation help.
To test:
* Visit comments moderation
* Click the help link
* Confirm manual link works
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Nicole C. Engard [Thu, 24 Oct 2013 03:44:27 +0000 (23:44 -0400)]
Bug 10671: Remove Unused Help File
This patch removes an unused help file in the help/export
folder.
To test:
Just confirm that the file is removed, there were no links
to it anymore.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
A corresponding page in Koha doesn't seem to exist. Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Nicole C. Engard [Thu, 24 Oct 2013 03:38:56 +0000 (23:38 -0400)]
Bug 10671: Update Offline Circ Help
This patch updates the offline circulation help files.
To test:
Visit the KOC file upload and pending transactions page
Review the help and check the links
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Nicole C. Engard [Tue, 15 Oct 2013 18:56:08 +0000 (14:56 -0400)]
Bug 10671: Add missing authority merge help
Test after 10/23 (when the manual link will work)
Visit authorities
Start a merge
Click help on during the merge process
Be sure that help is there and link works.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
There is help and link works
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Nicole C. Engard [Tue, 15 Oct 2013 18:24:34 +0000 (14:24 -0400)]
Bug 10671: Update main help files
This patch updates help files that aren't in any other folder.
To test:
* Visit the main staff page and review the help
* Visit the About page and review the help
* Visit a page without help (which there better not be) and
review the link to the manual
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All links works.
For a page without help, in detailed view of a record, select MARC or ISBD tabs,
no help but good link.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Nicole C. Engard [Tue, 15 Oct 2013 17:54:39 +0000 (13:54 -0400)]
Bug 10671: Add missing patron lists help
To test go to Tools > Patron Lists and click 'Help'.
Confirm that the help is there and without typos.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Help present. No typos
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Help file shows on correct page, no typos found. Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolyn SOMERS [Fri, 17 May 2013 12:03:37 +0000 (14:03 +0200)]
Bug 10271: fix searching using an index containing "ns" or "nb"
When an index does not contain a structure part, the structure "wrdl"
is automatically added and a structure is mandatory to build search
query (to convert ':' into '=').
But the code that tests that the structure is not already defined looks
in entire index string :
$index =~ /(st-|phr|ext|wrdl|nb|ns)/
It should look for a comma followed by a structure and in the case of
"nb" and "ns" look for an exact match.
The consequence is that an index containing ns or nb or phr or etc does
not work.
This patch modifies the regexp for this part and other parts looking at
structures into index.
Test plan :
- Desactivate all searching sysprefs.
- Create a new index called "ansa" number 8999 into bib1.att,
ccl.properties and records.abs
- Index a biblio with a value on this index, ie "VALUE"
- Perform a search on this index by editing URL:
http://<server>/cgi-bin/koha/catalogue/search.pl?idx=ansa&q=VALUE
=> Without patch, the search does not work. The PQF query is
"@and ansa: VALUE"
=> With patch, the search works. The PQF query is "@attr 1=8999 VALUE";
- Perform same test with an index containing a structure ie "aphra"
- Set QueryAutoTruncate syspref to automatically
=> Check * is added to operand : PQF query is
"@attr 1=8999 @attr 4=6 @attr 5=1 VALUE"
- You may check stopwords removal but this feature is obsolete
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: as far as I can test, this works. Small tab error reported
by koha-qa, fixed in a followup.
This kind of patch is difficult to test without explicit instructions,
not everyone knows how to check what kind of PQF search is used.
I don't know. But I can test search results.
Test:
1) Deactivate search sysprefs
QueryAutoTruncate = only if * is added
QueryFuzzy = Don't try
QueryStemming = Don't try
QueryWeightFields = Disable
UseQueryParser = Do not try
2) Create new index 'ansa'
bib1.att : att 8999 ansa
ccl.properties : ansa 1=8999
records.abs : melm 999 ansa:w,ansa:p
1) and 2) from comment 3 on Bug
3) In the undestanding that index refers to field 999,
edited default framework, made 999a visible on editor
4) Edit sample record, add 'VALUE' to 999a, save, reindex
5) Search with /cgi-bin/koha/catalogue/search.pl?idx=ansa&q=VALUE
No results
6) Apply patch, repeat search
Got results
That's all I can test. If not enough for QA, then this
must wait until further and explicit test instructions
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There is (for MARC21, at least), an exising indexes that this patch
fixes: Code-institution.
Galen Charlton [Mon, 28 Oct 2013 15:34:15 +0000 (15:34 +0000)]
Bug 10271: regression test for search using indexes containing 'ns'
This patch adds a regression test for doing a form-based catalog
search using an index that contains the string 'ns' in its name. In
this case, the index being tested is 'Code-institution'.
To test
-------
[1] Prove -v t/db_dependent/Search.t should have two failed tests;
one each for GRS-1 and DOM testing.
[2] After applying the main patch for this bug, the tests should
pass.
Galen Charlton [Tue, 22 Oct 2013 00:14:47 +0000 (00:14 +0000)]
Bug 11108: fix duplicate display of basket whose receipt has just been cancelled
After receiving an order basket, before finishing receiving the shipment,
one has an option to cancel the receipt. This patch fixes a bug where
a basket whose receipt was just cancelled displays on both the pending orders
and already received tabs.
This patch also fixes a minor unitialized variable warning.
To test:
[1] Create a basket with at least one order and close it.
[2] Receive the order, then on the row in the 'Already received'
table, click the cancel receipt link.
[3] In the page that displays, the basket just cancelled displays
on both tables. Clicking the cancel receipt link again results
in an error message.
[4] Apply the patch.
[5] Repeat steps 1 and 2. This time, the cancelled basket displays
only in the pending orders table, as expected.
[6] Verify that after applying the patch, the following no longer
is logged in the Apache error log:
parcel.pl: Use of uninitialized value in string eq at acqui/parcel.pl line...
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Ed Veal <ed.veal@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes test plan, all tests and QA script.
Works as described.
Owen Leonard [Fri, 25 Oct 2013 14:39:03 +0000 (10:39 -0400)]
Bug 11133: fix markup errors in OPAC place hold form HTML
There are markup errors in the OPAC place hold form which prevent it
from validating successfully. These errors don't seem to cause any
visual problem but can potentially cause problems when debugging
template logic.
To test, apply the patch and validate the page using your preferred
validator (since it's a page which requires login you'll have to upload
or paste the source). The page should validate successfully. Test when
placing holds on:
- a single item
- multiple items
- items which you cannot place on hold
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested according to test plan and validated souce code with
W3C Validator.
Owen Leonard [Sun, 20 Oct 2013 17:39:06 +0000 (10:39 -0700)]
Bug 11057: Bootstrap theme: fix display of active language in language chooser
There is a problem with how an active single language is styled, making
the alignment look incorrect. This patch amends the markup and the CSS
to make it look better. This patch does not address the position of the
language menu.
To test you must have at least one additional single translation
installed. Apply the patch, refresh the page, and confirm that the
display of the active language is improved.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Improved view of current language. No koha-qa errors.
1) Downloaded a couple of xx-YY-bootstrap.po from
http://translate.koha-community.org/projects/314
2) Installed sample languages
3) Enable them and opaclanguagesdisplay
4) Checked correct alignment of selected language
Signed-off-by: Ed Veal <ed.veal@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
The selected language has not a padding, contrary to others.
Not perfect but it fixes the descripted behavior.
Martin Renvoize [Thu, 5 Sep 2013 14:49:55 +0000 (15:49 +0100)]
Bug 10829: fix browsing across pages breaks for OPAC bibs-linked-to-authority searches
Test plan
1. Do an authority search in the OPAC (A search for 'an:49' perhaps..
that should bring up results for authority number 49, hopefully there
are multiple pages of results, if not try again and find one that
gives you multiple pages of results)
2. Click the final result on any page of results (there must be more
results to follow for this to work)
3. Try clicking the 'Next' button in the 'Browse results' pane on
the right of the page.
4. It should take you to the next result in the search list (i.e
the first result from the next page of results) - Double check it is
correct, we found that it was often not.
5. Apply patch and run same process, this time you should get the
correct paging.
Signed-off-by: Koha Team Amu <koha.aixmarseille@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I reproduce the issue and I confirm this patch fixes it!
Fridolyn SOMERS [Mon, 3 Dec 2012 13:08:07 +0000 (14:08 +0100)]
Bug 9192: let UNIMARC_sync_date_created_with_marc_biblio.pl create fields if needed
Prior to this patch, this script would only modify the date
created and modified fields; this patch changes the behavior
so that the fields can be created if they're not already present
in the record.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 9192: UNIMARC_sync_date_created_with_marc_biblio.pl field creation (followup)
Add tests :
if field < 10 it must not have a subfield
if field > 9 is must have a subfield
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Both patches applied, no koha-qa errors.
Colin Campbell [Thu, 10 Oct 2013 13:09:19 +0000 (14:09 +0100)]
Bug 11034: remove incorrect return for BiblioAutoLink
BiblioAutoLink was being called expecting an array to
be returned. The subroutine in fact returns a scalar
As the variables that the return was stored in, went
out of scope immediately. It is probably better to be
explicit that we are throwing the return away by not
going through the motions of storing it in a variable
To test:
[1] Add or save a bib record using the cataloging editor.
[2] Verify that no regressions have occurred
[3] (optional) If BiblioAddsAuthorities is on, verify that
relevant authority records are linked to from the bib.
biblioitems.serial is not a foreign key; it's a Boolean indicating
whether the biblio record is a serial, which in turn influences how
serial items are displayed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Joy Nelson <joy@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Mon, 21 Oct 2013 20:46:26 +0000 (16:46 -0400)]
Bug 10493: (follow-up) fix various QA issues
Adds a new Template Toolkit filter EncodeUTF8 to encode strings
to utf8 for correct display of diactritics.
Adds the new JavaScript function removeFocus() to staff-global.js
Use this function to remove the focus from any element for
repeated scanning actions on errors so the librarian doesn't
continue scanning and miss the error.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This works as described - you have to actually look at the
error and pick what you want to do or confirm it. I think
maybe tying the action to a shortcut (c = confirm or similar)
would be nice, so you can get away with only using the keyboard.
Owen Leonard [Thu, 1 Aug 2013 19:37:46 +0000 (15:37 -0400)]
Bug 10493: (follow-up) fix minor template issues
This template followup fixes some minor template errors and adds some
style to dialog buttons matching those seen on the circulation page.
To test, submit barcodes to trigger the various error conditions:
Non-existant barcode, over the renew limit, restricted patron, item on
hold. Override and Ignore buttons should be properly styled and
functional.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Wed, 19 Jun 2013 09:28:01 +0000 (05:28 -0400)]
Bug 10493: Add renewal script
This patch adds a renewal tool that functions similar to the returns where a
librarian can continuously scan items for renewal. This script blocks
renewals that are impossible, and allow the same renewal overrides
as circulation.pl
Test plan:
1) Apply the patches for bug 8798
2) Apply this patch
3) Browse to /cgi-bin/koha/circ/renew.pl
4) Enter an invalid barcode, you should get an error message
5) Enter a valid, but not checked out barcode, you should get an error
message.
6) Enter a valid barcode that is checkout out and should be renewable,
you should get a success message.
7) Enable AllowRenewalLimitOverride
8) Enter a barcode for an item that has been renewed too many times
9) You should get a warning which you can override.
10) Disable AllowRenewalLimitOverride
11) Repeat steap 8
12) You should get a blocking error message
11) Enter a barcode for an item with unfilled holds on it,
you should get an overridable warning
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Passes all tests and QA script, some issues have been
addressed in follow-ups.
Jonathan Druart [Wed, 2 Oct 2013 07:58:14 +0000 (09:58 +0200)]
Bug 5336: (follow-up) multiple QA fixes
- add a message if the search returns no result
- keep selected values if the search returns no result (for fund and
order status)
- remove plurals in order status
- move the order status column in the search results table
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
New tests also pass:
t/db_dependent/Acquisition/close_reopen_basket.t
1) Database update - I end up with too many partials. My test cases:
- New orders, basket still open
OK Expected: new, Result: partial
- Ordered orders, basket and basketgroup closed
OK Expected: ordered, Result: partial
- Partially received orders
OK Expected: partial/complete, Result: partial/complete
- Received orders
OK: Expected: complete, Result: complete
- Cancelled orders
* cancelled from open basket before order
OK: Expected: cancelled, Result: cancelled
* cancelled from closed basket before receive
OK: Expected: cancelled, Result: cancelled
All aqorders where updated with the correct status.
I have saved my 'pre-updatedatabase' and can repeat the test anytime you have a follow up.
2) Testing search functionality
a) Order search - result list
Order search shows a new column, I think it would be a bit better if the
status there was singular instead of plural - new order, partially received
order etc. - maybe we could even leave out the 'order'? (minor)
The column seems a bit lost in the middle, not sure where it would make more
sense (just saying)
b) Order search - advanced search form
The advanced search form now shows a new filter: Order status
All new status can be searched.
- an "empty" search will find all but cancelled orders
- searching for cancelled orders works correctly and shows results
Search works correctly, no regressions found.
If no result is found a message is shown.
All search input is kept, so you can modify your search terms easily.
3) Testing setting of status after applying the patch
a) Create a new order with 2 items - status is new. OK
b) Close the basket - status is ordered. OK
c) Receive both items - status is completed. OK
d) Undo receipt - status is ordered. OK
e) Receive only 1 item - order is split up into 2 orders:
- status is partial OK
- status is completed OK
f) Undo receipt of received item - order is combined into 1 again
- status is ordered OK!
g) Receive only 1 item again - status ordered/partial.
h) Delete order.
- status is completed
- status is cancelled
OK!
i) Undo receipt of 1 item again.
Refresh page.
This results in the following behaviour, that has been reported as
bug 10984. After refreshing the page follow message is shown:
Cannot cancel receipt. Possible reasons :
- The order line you trying to cancel was created from a partial
receipt of another order line which is already received.
Try to cancel this one first and retry.
- The order line you trying to cancel was created from a partial
receipt of another order line which has been deleted.
Cancellation is not possible.
BUT: The receipt is undone, but you are left with a
line with 2 items, a cancellation date and the status ordered.
Because of the cancellation date the order is not visible in pending orders.
The status is correct - so I feel this should not stop this patch.
Jonathan Druart [Tue, 1 Oct 2013 12:06:11 +0000 (14:06 +0200)]
Bug 5336: (follow-up) fix case where partial status was not correctly set
An order (o1) is considered as partially received if (at least) another
order (o2) has the o1.ordernumber == o2.parent_ordernumber and the
quantity received is < to the quantity (to receive) and o1.ordernumber
!= o1.parent_ordernumber.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 18 Jan 2012 15:05:40 +0000 (16:05 +0100)]
Bug 5336: Order search (search and UI enhancements)
You can now search orders by
- order status
- fund
The patch series also adds a new field, aqorders.orderstatus, which can
contain following values:
new
ordered
partial (for partially received orders)
complete
cancelled
To test: Search and check if results are consistent in histsearch.pl Signed-off-by: Cedric Vita <cedric.vita@dracenie.com> Signed-off-by: Pierre Angot <tredok.pierre@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on last patch.
Note: status are no longer numeric, but strings now.
Bug 10403: Show inactive but unlocked budgets on orderreceive
I have heard from several libraries that at the end of the budget
year even though a budget is inactive for new acquisitions, an
inactive budget should remain modifiable until the books are
closed and the budget is marked inactive. This patch makes it so
that all budgets that are unlocked are available on the order
receipt page (only).
Right now there is no way to change the budget or fund when receiving an
item, which is annoying, particularly at the end of the fiscal year when
every item not already received has to be switched to the following
year's budget. This patch adds the ability to change the budget and fund
when receiving.
To test:
1) Apply patch.
2) Create an order for a vendor, choosing a fund to use for that order.
3) Receive the order, leaving the fund unchanged. Make sure the fund
did not change.
4) Create another order for a vendor, choosing a fund to use for that
order.
5) Receive the order, this time changing the fund. Make sure the fund
is changed.
6) Run the unit test:
> prove t/db_dependent/Acquisition.t
7) Sign off.
(Notes: this patch depends on the Acquisitions.t unit test improvements
in bug 10274; the seemingly-unrelated change in SQLHelper quiets an
irritating warning caused by the NewOrder call in ModReceiveOrder)
Owen Leonard [Mon, 21 Oct 2013 21:54:41 +0000 (14:54 -0700)]
Bug 11097 - Hide duplicate patron button if logged in user lacks CAN_user_borrowers permission
The "duplicate" button on the circ/patron toolbar should not appear if
the logged in user lacks permission to edit patron records. This patch
wraps the button in the required logic.
To test, open a patron record in circulation or patrons and view as a
staff client user who both has and doesn't have CAN_user_borrowers
permission. The button should be shown and not shown accordingly.
Signed-off-by: Ed Veal <ed.veal@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Thu, 26 Sep 2013 16:22:39 +0000 (12:22 -0400)]
Bug 10954: ensure that payment receipt displays the payment made
When printing a payment receipt, the payment did not display, only the
total currently owed.
Test Plan:
1) Create a payment for a borrower
2) Print the payment with the "print" button to the right of the payment
3) Note the missing payment line
4) Apply this patch
5) Repeat step 2
6) Note the payment line now displays
Ketan Kulkarni [Wed, 9 Oct 2013 13:27:03 +0000 (18:57 +0530)]
Bug 10785: change 'Dropbox' labels to 'Book drop'
Signed-off-by: KohaCon13 demo <brendan@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Checked the book drop still works, also grepped for
other appearances of the term.
Fixed capitalization.
Bug 10982: fix link to IFLA UNIMARC documentation in Cataloging
In Cataloging, a ? opens a documentation page on IFLA web site. The current
implementation rely on the tag tab to select the appropriate IFLA
documentation web page. It doesn't work when UNIMARC tag are displayed
in a tab which digit is different for tag first digit.
To reproduce the bug:
- Modify default framework, put all 200 subfields in tab 1
- Add a new biblio record
- Click on ? on 200 field
=> Wrong IFLA page is opened
Apply the patch and retry...
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Simple fix. Work as described. No koha-qa errors
Test on UNIMARC install
1) Switched all 2xx tags to tab 1
2) press any 2xx ?, wrong page
3) patch applied
4) links are now correct
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Tue, 22 Oct 2013 05:15:07 +0000 (05:15 +0000)]
Bug 11002: (follow-up) use jQuery validator plugin
This patch uses the jQuery validator plugin introduced in
bug 6209 for two reasons:
[1] To supply validation for non-HTML5-compatible web
browsers.
[2] To force use of the validator plugin rather than
built-in validation for HTML5 browsers, which means
that our translations will be used.
Note that a version of the function to prevent double form submission
is used as the submit handler invoked when the validator plugin
is satisified that the form is complete.
To test:
[1] Same as the main test plan, but note that the validation
messages now appear inline rather than as pop-ups.
[2] Verify that the double form submission prevention still
works.
Jonathan Druart [Mon, 7 Oct 2013 08:41:24 +0000 (10:41 +0200)]
Bug 11002: simplify patron mandatory field validation
When the pref BorrowerMandatoryField is set and a librarian forget to
fill fields, a js popup appears with the following message:
"The following fields are mandatory: surname, etc."
The fields are not translatable.
Test plan:
- fill the pref BorrowerMandatoryField with something like:
title|zipcode|surname|cardnumber|branchcode
- go the members/memberentry.pl?op=add page
- verify you are not allowed to add the patron without filling all
mandatory fields.
Jonathan Druart [Mon, 7 Oct 2013 09:41:22 +0000 (11:41 +0200)]
Bug 11003: fix JS error on the staff cart page
A call to yuiToolbar breaks JavaScript code on the cart page.
Test plan:
- add some biblio to your cart
- open the cart
- a js error occurs (see it with firebug):
ReferenceError: yuiToolbar is not defined
- apply the patch
- retry and verify the error does not appear anymore.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Works as described.
Colin Campbell [Wed, 16 Oct 2013 09:09:12 +0000 (10:09 +0100)]
Bug 11058: fix compilation warning in C4::Record
A routine declares two lexical variables named $stylesheet.
This patch renames the second to keep code clearer and
avoid propagating compile time warnings
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised!
Given how easy it is to accidentally receive items from one invoice on
multiple invoices, the ability to merge invoices can be quite handy.
This patch adds that ability to Koha's Acquisitions module.
To test:
1) Apply patch.
2) Run unit test:
> prove t/db_dependent/Acquisition/Invoices.t
3) Create two invoices from the same vendor for merging, and receive at
least one order on each.
4) Do a search on the Invoices page that brings up both the invoices you
created.
5) Check the boxes next to the two invoices.
6) Click "Merge selected invoices."
7) Choose which invoice you want to keep (the default will be the first).
8) Click "Merge."
9) Confirm that the resulting invoice has all the orders you received
listed on it.
10) Sign off.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Merged several invoices sucessfully - with and without received
orders, open and closed. Works nicely.
Jonathan Druart [Fri, 26 Apr 2013 07:30:23 +0000 (09:30 +0200)]
Bug 10724: Pending orders: add basket group name in filters
This patch adds a new filter "basket group name" for pending orders
searches.
Test plan:
Try different filters and check that results are consistent.
Try to filter by basket group name.
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Applied on top of patches for bug 10723.
Passes all tests and QA script.
Note: It's a bit irritating that the basket name is not shown
in the list of pending orders, so there is no way to check the
results are correct without checking from another page.
Jonathan Druart [Wed, 14 Aug 2013 08:43:07 +0000 (10:43 +0200)]
Bug 10723: Merge GetPendingOrders and SearchOrders routines
In the C4::Acquisition module, 2 routines do the same work. This patch
merges these 2 routines.
Test plan:
test the acqui/orderreceive.pl, acqui/uncertainprice.pl
and serials/acqui-search-result.pl, acqui/parcel.pl scripts.
Note: on acqui/parcel the basket filter is a search on basket name (was
on basket id, which was not relevant).
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pm, no adverse bahaviors noted. All sub calls updated.
projects / koha.git / log