Owen Leonard [Mon, 10 Jun 2013 18:21:11 +0000 (14:21 -0400)]
Bug 10432 - Display of enabled status on course list is not accessible
The list of courses in Course Reserves uses an image with no alt
attribute to display the enabled/disabled status of each course. This is
not accessible or valid HTML.
This patch removes the image altogether in favor of a simple "Yes" or
"No." To test, view the list of existing course reserves. Enabled and
disabled courses should show "yes" or "no" in the "Enabled" column.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Wed, 9 Jan 2013 01:32:47 +0000 (17:32 -0800)]
bug 9370: improve splitting of LC call numbers for labels
Use the Perl module Library::CallNumber::LC to parse and split
LC call numbers when generating spine labels.
For example, QH541.15.C6 C25 2012 should be split as follows:
QH
541.15
.C6
C25
2012
To test, create an item with call number QH541.15.C6 C25 2012
and classification source LC, then create a spine label for that
item using a layout of type 'biblio' that has the split call numbers
option enabled. The call number should be split as indicated above.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10406: memove div and more obsolete CSS related to YUI autocomplete
To test:
- Apply, then test the patron search form
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Wed, 22 May 2013 13:52:40 +0000 (09:52 -0400)]
Bug 10311 - Holds queue ignores item-level holds where only one items exists
If a record has only one item, and that item has one item-level hold on
it, that hold will not show in the holds queue.
Test Plan:
1) Create 1 record with 1 item at BranchA
2) Create an item-level hold for that item, for pickup at BranchA by a
patron of BranchA
3) Run build_holds_queue.pl
4) View the holds queue for BranchA
5) Note the hold is not in there
6) Apply this patch
7) Re-run build_holds_queue.pl
8) View the holds queue again
9) Not that the hold is now there
Signed-off-by: George Williams <georgew@latahlibrary.org> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Fri, 17 Aug 2012 15:23:47 +0000 (11:23 -0400)]
bug 6281: introduce LC::CallNumber::LC for sorting LC call numbers
This replaces the previous hand-coded normalizer. Because
LC::CallNumber::LC appears to reject strings that aren't valid
LC call numbers, significant changes to the test cases were
made as well -- however, the one that really counts is the
last one which verifies the sorting.
To recalculate the call number sort key for each item, it is necessary
to run misc/maintenance/touch_all_items.pl
To test, create item records with the following call numbers, setting
the classification sort to 'lcc':
Owen Leonard [Tue, 9 Apr 2013 17:46:14 +0000 (13:46 -0400)]
Bug 10406 - Remove obsolete CSS related to YUI autocomplete
staff-global.css contains CSS which related to the old YUI autocomplete
widget. Since this has been replaced with jQueryUI the CSS is now unused
and can be removed.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Jonathan Druart [Tue, 21 May 2013 12:54:36 +0000 (14:54 +0200)]
Bug 10296: UT: t/data/db_schemas not needed
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
These were added with the intention of writing some
schema verification test cases, but if that idea
gets picked up again in the future, fresher copies
of kohastructure.sql can be obtained from Git.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Wed, 29 May 2013 14:20:46 +0000 (16:20 +0200)]
Bug 10343: dbrev for rename OpacShowHoldNotes to OpacHoldNotes
Renames the pref for install and upgrade.
Test plan: See the other patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Wed, 29 May 2013 14:19:27 +0000 (16:19 +0200)]
Bug 10343: Rename OpacShowHoldNotes to OpacHoldNotes
As QA followup on report 9722. Built on top of another followup report 10321.
Test plan:
Run the db revision included in the other patch.
Enable OpacHoldNotes. Check that you can add a hold note on opac-reserve.
Do you see it on opac-user and in staff on catalog detail of that biblio?
Do a grep on ShowHoldNotes on the Koha code: grep -i ignores case. You should
find three occurrences only in updatedatabase.pl (the old dbrev and this dbrev
renaming them). These are fine.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Tue, 4 Jun 2013 19:35:42 +0000 (15:35 -0400)]
Bug 2774 - Path to theme is hard-coded in many places
This patch corrects serveral more places in the templates where the path
to the prog theme is hard-coded. To test, apply the patch and view the
following cases:
- When a database update is triggered the login page loads login.css.
This path should be correct. (Reference to wizard.css is removed as
per Bug 10422).
- The course reserves home page should load datatables-related assets
correctly.
- Help pages for the Quick spine label creator and the staff client home
page should show the correct paths where they reference the Koha file
system.
- The web installer pages should correctly load the Koha logo.
- The label creator "manage" pages (layouts, templates, etc.) should
correctly load datatables-related assets.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Checked all 5 - look good.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Mon, 13 May 2013 18:26:17 +0000 (14:26 -0400)]
Bug 10221 - hold expiration doesn't show on patron's list of holds
When viewing the list of a patron's holds on the circulation page or the
patron detail page the table of holds doesn't display the holds
expiration date, if present. This patch adds display of the hold
expiration date.
To test, place a hold for a patron and set an expiration date for it.
View the patron's existing holds on both circulation.pl and
moremember.pl. The expiration date you chose should appear in the table
of information about existing holds.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
works great
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 31 May 2013 13:54:34 +0000 (09:54 -0400)]
Bug 10354 - Don't show optgroup Libraries when no search groups are defined
In the OPAC, if there are no search groups defined, there's no reason to
embed library choices inside an <optgroup>. <optgroup> should only be
used to differentiate the list of individual libraries from search
groups. This patch removes the <optgroup> when no search groups are
enabled.
To test, apply the patch and:
- Enable OpacAddMastheadLibraryPulldown.
- Create a library search group in Administration ->
Libraries and Groups and enable it by checking the "show in search
pulldown" box.
- View the library pulldown in the OPAC search bar. Libraries and groups
should be separated into <optgroup>s.
- Disable your library search group and refresh the OPAC page. The
pulldown of libraries should now display libraries with no <optgroup>.
Jesse Weaver [Mon, 3 Jun 2013 19:22:57 +0000 (13:22 -0600)]
Bug 9300 - filtering Export (MARC) data by accession date does not work
Small typo in query construction, fixed.
To test:
1) Try filtering a MARC export using "Start date"
2) Notice the lack of filtering
3) Apply patch
4) Try export again, records are filtered by dateaccessioned
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 5 Jun 2013 14:48:36 +0000 (10:48 -0400)]
Bug 10420 - Standardize spelling of "authorized"
This patch corrects instances of the non-[American]-standard spelling
"authorised" when used in text.
The following instances are corrected:
- In Administration -> Funds, the error message displayed if you do not
have permission to edit a fund.
- In Administration -> Authorized values, the instructions linked to the
"Libraries limitation" field.
- In Administration -> MARC bibliographic framework test, instructions
related to linking to authorized values.
- In the course reserves add form, error messages referring to missing
authorized values.
- In guided reports, error messages shown when an authorized value
chosen as a report parameter doesn't exit.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 5 Jun 2013 12:49:50 +0000 (08:49 -0400)]
Bug 10414 - "Course Reserves" should be "Course reserves" in global "More" menu
The global "More" menu lists "Course Reserves," which is incorrectly
capitalized. This patch changes it to "Course reserves."
To test, apply the patch and view any page in the staff client. When you
click the "More" menu item the link should read "Course reserves."
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Frédérick [Wed, 20 Mar 2013 20:01:42 +0000 (16:01 -0400)]
Bug 9549: Show local cover images in the OPAC shelf browser
Add the ability to view local cover images in the shelf browser.
To test:
1. Add a local cover image to a record. Set OPACLocalCoverImages sys pref to "display."
2. Search for the record, go to the Details page, and click on Browse Shelf.
3. Verify that the local cover image appears in the shelf browser.
Frédérick [Wed, 20 Mar 2013 21:23:39 +0000 (17:23 -0400)]
Bug 8600: can now remove search input fields in OPAC advanced search form
If you follow the 'More options' link in the OPAC
advanced search form, each search input field after
the first now has a '-' button that lets you remove
the box. This complements the '+' buttons that
already existed that allow the user to add additional
input fields.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Colin Campbell [Thu, 30 May 2013 17:23:55 +0000 (18:23 +0100)]
Bug 766: remove CGI::scrolling_list from request.pl
Let the template take care of generating the display.
Lets at least part of request.pl be more succinct.
To test, place a hold and search for the patron using a partial name.
You should get a dropdown select list of patrons and be able to select
the patron to hold for from there.
The functionality should remain unimpaired after this patch is applied.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sun, 19 May 2013 08:56:01 +0000 (10:56 +0200)]
Bug 10249: Fix untranslatable strings in OPAC detail page
Star ratings feature:
- Your CGI session cookie is not current. Please refresh
the page and try again.
- average rating:
- your rating:
Browse results feature:
- Click to rewind the list to
- See biblio
- with biblionumber
- by (between title and author)
- Click to forward the list to
- Go to detail
To test:
- Update the po file using 'perl translate update <langcode>'
- Translate all new strings, maybe mark them with XX to make it easier
to find them
- Install the updated translation file using 'perl translate install
<langcode>'
- Test the ratings and browse results features in the OPAC detail page
- Verify everything is still working/displaying like it should
- Check that you don't find any unstranslated strings/terms
Some hints where the changes are:
- Change an existing rating - the average and your rating will change
- Browse result list and check mouse over tooltips for all links
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Strings are now translated, and no emergent JS errors have revealed
themselves.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 8584: cleanup_database.pl : Add a DAYS parameter for email purges.
You can now specify a number of days with the --mail parameter. Only
mails older than the specified number of days will be deleted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sun, 14 Apr 2013 15:05:39 +0000 (17:05 +0200)]
Bug 7892: Open link to imported record in new tab
Change links to imported records to open in a new window/tab
on the staged records management page.
To test:
1) Go to Tools > Staged MARC record management
2) Open an imported batch by clicking on the file name
3) Click on bib# in the record column
4) Verify links open in a new window/tab now
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Tue, 9 Apr 2013 19:11:22 +0000 (15:11 -0400)]
Bug 10015 - UniqueItemFields could have link to database documentation
Other system preferences which require entry of database column names
include a link to the scheme for reference. The UniqueItemFields should
do the same. This patch rewords the preference description to
incorporate a link.
To test, open the acquisitions tab in system preferences and confirm
that the UniqueItemFields description looks correct and links to the
right page in the schema.
Owen Leonard [Mon, 11 Mar 2013 20:11:26 +0000 (16:11 -0400)]
Bug 9744 - Add a column Fund name on the home page of acquisitions
This patch offers an alternative option to fix Bug 9744. In this version
the table of funds swaps positions with the suggestions block so that
the table has the whole width of the screen. This eliminates the need to
adjust its float property.
Other changes:
- Simplification of the column and row-hiding JavaScript
- The addition of an "Active" column to be shown when all funds
are shown (this helps indicate to the user which rows were hidden)
- Linking the fund owner to their patron record
- Linking the fund id, given the correct permissions, to the view of all
funds for that budget (the best alternative to linking to a view of
the fund details, which we do not have).
- Correcting permission level required to add a budget
To test, view the acquisitions home page. The layout should feel
comfortable. The table of available funds should show the fund name.
The checkbox to show all funds should work correctly.
Signed-off-by: caroline very-mathieu <caroline.very-mathieu@nimes-ville.fr> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Owen Leonard [Fri, 31 May 2013 15:36:02 +0000 (11:36 -0400)]
Bug 10350 - Capitalization: Home Library column in staff detail items table
"Home library" is incorrectly capitalized on the catalog detail page.
This patch corrects it.
To test, view the normal view of record in the staff client catalog.
The "Home library" table header in the holdings table should be
correctly capitalized.
Janusz Kaczmarek [Fri, 24 May 2013 11:21:36 +0000 (14:21 +0300)]
Bug 10326: bulkmarcimport.pl doesn't restore value of CataloguingLog syspref
To test:
0) Don't apply the patch yet.
1) Have the CataloguingLog system preference set to 'Log'.
2) Import a file of bibliographic records with bulkmarcimport.pl.
3) Check the state of CataloguingLog system preference -- it will be
set to 'Don't log'.
4) Apply the patch.
5) Repeat steps 1-3. The CataloguingLog system preference
will be 'Log'.
Marcel de Rooy [Wed, 22 May 2013 13:01:07 +0000 (15:01 +0200)]
Bug 10381: Followup adding some text around Apply/cancel filter.
The texts Apply/cancel filter did not need translation and were used to get
this change into 3.12.
For 3.12.X or 3.14 we can add some words to clarify its meaning.
With thanks to Owen for some rewording.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Pierre Angot <tredok.pierre@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Thu, 27 Dec 2012 13:18:34 +0000 (14:18 +0100)]
Bug 8845: Followup Allow to give a date using the syspref format
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Colin Campbell [Wed, 30 Jan 2013 08:50:23 +0000 (08:50 +0000)]
bug 9505 refactor loops in invoices.pl
- Remove an unnecessary loop where output just
recreated input.
- Remove unnecessary temp variables that obscure code purpose.
- Call the variable containing invoices, invoices
rather than anonymous and ambiguous results
reflect namechange in template.
- Lists are passed to template as array refs;
declare them as scalars as that is how we use them.
- No need to introduce the whole namespace of some C4
modules for 1 routine.
Test plan:
Note that this patch should not change any visible behavior.
[1] Open the invoice search page.
[2] Verify that the list of suppliers in the drop-down
on the search form is complete.
[3] Verify that the list of libraries in the drop-down
on the saerch form is complete.
[4] Perform a search. Verify that the list of invoices
is correct.
Owen Leonard [Fri, 8 Mar 2013 17:16:19 +0000 (12:16 -0500)]
Bug 9773 - Replace YUI AJAX calls in cataloging plugins with jQuery
Several cataloging plugins make some simple AJAX GET calls via the YUI
AJAX feature. This code can be easily converted to jQuery.
To test, link each plugin to the relelvant field by editing your MARC
stucture. Confirm that functionality is unchanged.
For callnumber.pl and callnumber-KU.pl, test by linking to 952o.
callnumber.pl is triggered on blur of (when you focus on and click away
from) the 952o entry field. callnumber-KU.pl is triggered by clicking
the "..." link.
stocknumberam123.pl should be linked to 952i. If your data doesn't
already have information stored for inventory number, modify at least
one record to add one. The plugin is triggered on blur of the 952i
field. It should increment the highest value inventory number stored in
your system.
unimarc_field_010.pl is UNIMARC-specific, so I'm guessing about its
functionality. I tested it by linking the plugin to MARC21 field 020a.
The plugin is triggered on blur of the affected field (020a in my test).
You can confirm that the plugin returns valid data by using a tool like
Firebug to view the XHR response. Or if you're not using UNIMARC you can
hack the plugin to update a different field instead (line 57,
/^tag_210_subfield_c/ ). I tried "245_subfield_c" instead of
"210c_subfield_c." Nonsensical, but useful for testing.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tried the 3 MARC21 plugins. Did not try the Unimarc one, but it's exactly the same code change.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Thu, 7 Mar 2013 13:56:59 +0000 (08:56 -0500)]
Bug 9763 - Add callnumber column to "print summary" for moremember.pl
Test plan:
1) Apply patch
2) Check out some items to a borrower
3) Choose "Print summary" from the "Print" pulldown
4) Observe the new callnumber column after "Author" and before "Item type"
5) Note that the totals in the footer are still aligned correctly
Signed-off-by: Eli Anthony <library.assist@taylorcountygov.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10359: transform masthead dropdown after user JS for CCSR
Since libraries may want to customize the options in the masthead search
dropdown, which is done via dropdown, it would be better if the select
box were transformed *after* user javascript was run.
To test:
1) Switch to the CCSR OPAC theme.
2) Add some Javascript to your OpacUserJS that will modify the masthead
search dropdown, such as:
$("select[name='idx']").append("<option value='Host-item,wrdl'>Journal title</option>");
3) Note that when you view the OPAC, the results in the dropdown are unchanged.
4) Apply patch.
5) Note that your new option now shows up.
6) Sign off.
Galen Charlton [Mon, 20 May 2013 17:12:44 +0000 (10:12 -0700)]
bug 10292: improve fallback logic for picking XSLT
This patch fixes a bug whereby XSLT files from the
prog theme would be used (for English OPACs and staff
interfaces) even if the user had created and enabled a
custom theme that provided override XSLT files.
This patch provides a clearer implementation of the fallback
logic and adds test cases.
To reproduce the bug:
[1] Set OPACXSLTDetailsDisplay to 'default' and English as the OPAC
language.
[2] Create a new OPAC theme, including copying the XSLT files.
[3] Set opactheme to the new theme.
[4] Make a change to koha-tmpl/opac-tmpl/NEWTHEME/en/xslt/MARC21slim2OPACDetail.xsl
[5] View a bib record in the OPAC. The change made in the previous step
is not reflected.
To test after applying the patch:
[6] Reload the bib record in the OPAC. The change made in step 4 should
now be reflected.
[7] (To be thorough) Go through the test plan for bug 8947
and verify that there is no regression.
Kyle M Hall [Thu, 16 May 2013 18:02:24 +0000 (14:02 -0400)]
Bug 10262 - fine calculation at checkin not respecting CircControl
The fines.pl script uses the system preference CircControl to decide
what branches circ rules to use for fine generation.
Recently, code was added to the returns system to recalculate the fine
at checkin time ( to support hourly loans ). The problem is that this
code does not respect CircControl.
Test Plan:
1) Set circ control to "the library you are logged in at"
2) Set different fines rules for two different librarys
3) Check an item out at library A, backdate the due date so it's overdue
and will have fines.
4) Check the item in at library B
5) Observe that the fines should be generated based on library A's rules,
but the fines will be based on library B's rules instead!
5) Apply the patch
6) Repeat steps 3 and 4.
7) Observe now that the fines should reflect the fines rules for Library A
Note: it seems counter-intuitive for the fines system to behave this way
based on the preference being set to "the library you are logged in at"
but it does make sense. The rules used are from "the library you are
logged in at" when the item is first checked out.
If the fines system really did use the rules for the library the item was
returned to, it would be easy to exploit the library system. Some Koha
using systems have branches that charge fines, and others that don't, so
a patron could just return any overdue items to a non-charging branch
to avoid ever paying fines!
Furthermore, it would mean that the fines.pl script would be using one
set of rules to charge fines, and the returns system could possibly be
using another. Since fines.pl has been around far longer, it makes sense
to assume the fines.pl behavior is canonical.
Signed-off-by: Mickey Coalwell <mcoalwell@nekls.org> Signed-off-by: George Williams <georgew@latahlibrary.org> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Merged with reservations; see comment on bug report for details.
Owen Leonard [Mon, 13 May 2013 19:07:34 +0000 (15:07 -0400)]
Bug 10218 - In OPAC XSLT search results, add class to 'online access'
In some cases in OPAC search results and the detail page there is a
class specific to each line of data being output (publisher, date,
subjects, etc). In other cases there is no additional class. This patch
makes modifications to a few different OPAC files in an attempt to make
them consistent with each other.
To test, apply the patch and view:
- an OPAC detail page with OPACXSLTDetailsDisplay off
- the OPAC search results page with OPACXSLTDetailsDisplay off
- the OPAC search results page with OPACXSLTDetailsDisplay on
Labels should have classes relevant to their data. To test the specific
case requested by this bug, view details/results for a record which
includes online resources (856u in MARC21).
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
html changes only, passes all tests
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Colin Campbell [Fri, 3 May 2013 14:35:44 +0000 (15:35 +0100)]
Bug 10184 - Circulation History reverses sort order
Issue data is passed to the readingrec template ordered
most recent due date first. Datatables unless specified
otherwise do a presort on the data they will display
the default results in an order the reverse of what was
intended. Disabling the presort preserves the initial sort
order until the user selects a different sort
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Fri, 14 Dec 2012 12:31:00 +0000 (07:31 -0500)]
Bug 9286 - Add script to add a bib to the zebra queue from the command line
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: No test plan, but works.
Tested adding auth, biblios or both, then rebuilding -z
No errors.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Test Plan
1/ run misc/mod_zebraqueue.pl -a 1
2/ In your koha db
SELECT * FROM zebraqueue WHERE done = 0;
Check that a row for authority record id 1 has been inserted
3/ run misc/mod_zebraqueue.pl -b 1
4/ In your koha db
SELECT * FROM zebraqueue WHERE done = 0;
Check that a row for biblio record id 1 has been inserted
5/ run misc/mod_zebraqueue.pl
Make sure the help is sensible Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Mon, 13 May 2013 19:21:46 +0000 (15:21 -0400)]
Bug 10193 - Copies should be holdings as label for items on MARC view
In the OPAC MARC view, the table of holdings is labeled 'copies.' In
order to be consistent with the normal view this should be labeled
'holdings.' This patch makes this correction.
To test, apply the patch and view the MARC detail page for any record
with items. The table of holdings data at the bottom of the page should
be labeled 'Holdings.'
Owen Leonard [Fri, 10 May 2013 12:32:11 +0000 (08:32 -0400)]
Bug 9424: Move JavaScript out of header include
This patch removes JavaScript "onlick" attributes from header.inc and
moves the functionality to staff-global.js. This is in keeping with the
idea of progressive enhancement.
To test, be sure to clear your browser cache after applying the patch.
- Test the help link.
- Test the logout link with the intranetbookbag preference on and off.
- Open a patron's account and click "search to hold." Log out, and log
in again. Koha should not remember the patron you chose before
logging out (as seen from a search results page).
Katrin Fischer [Sun, 19 May 2013 10:16:16 +0000 (12:16 +0200)]
Bug 10284: Add missing spaces between label and content in XSLT view (780/785)
To test:
- Check OPAC and intranet XSLT view for a record that contains
780 and 785 fields.
- Verify there is no space between the label and the content of the
field.
- Apply patch.
- Verify the display both in intranet and OPAC is a little nicer now.
You can specify:
-f advsearch.tt => translate all files with a filename containing
'advsearch.tt'
or
-f search => will translate acqui/histsearch.tt, acqui/z3950_search.tt, etc.
Bug 9161: Followup: Add a -f param for the translate script
Now you can directly call the translate script
(misc/translator/translate) with the -f parameter
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
I've squashed the 3 patches, and reported doc into 'translate' script.
It works as advertised.
Side note: It would be great to extend this functionnality in order to
be able to apply the translation to XSL files stored outside Koha
directories hierarchy. Useful to translate site-specific XSLs defined
with XSLTResultsDisplay, and other sysprefs.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Chris Cormack [Mon, 29 Apr 2013 20:56:22 +0000 (08:56 +1200)]
Bug 10120: Adding a syspref to control if overdue charges are updated on return
On by default.
To Test
1/ Create an overdue item, that should get fines
2/ Return the item
3/ Check the borrowers record to see if the fine has been added/updated
Apply patch
1/ Make sure preference is set to do
Repeat steps 1-3 above
2/ Switch the preference to don't
Repeat stes 1-2
3/ Check the fine hasn't been added/updated
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass, works as described.
I would categorize this a bug fix for libraries that don't want
the new changed behaviour that was introduced by recalculating
fines on return. Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Mon, 6 May 2013 18:25:23 +0000 (14:25 -0400)]
Bug 10206 - Add Koha TT Plugin - Koha.Preference
This plugin is meant to be a place to put general purpose TT functions
directly related to Koha. If a plugin is not a filter, and does not
have more than one subroutine, that subroutine most likely belongs
in this TT plugin.
This first and only function the plugin currently has is Preference,
which allows a template to get the value of a system preference without,
it needing to be passed in from a perl script.
For example, to use, first include the line '[% USE Koha %]' at the top
of the template to enable the plugin, then do something like this
to check the value of a system prefence in the template:
[% IF Koha.Preference( 'MyPreference ) == 'SettingA' %] ...
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Fri, 26 Apr 2013 14:02:19 +0000 (16:02 +0200)]
Bug 10129: Babeltheque does not depend on COinSinOPACResults
This patch groups all loops on the new_results array into one.
It is useless to loop on the same results array several times.
Test plan:
Quite hard to test all cases.
This patch deals with 5 sysprefs:
COinSinOPACResults, Babeltheque, TagsEnabled, TagsShowOnList and
OpacStarRatings.
Try to enable/disable all of them and verify there is no difference with
and without this patch.
The only different will be: The Babeltheque information should be displayed
even if the COinSinOPACResults syspref is disabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This revised patch works fine for me, thanks.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified following system preferences still work as expected:
- COinSinOPACResults on/off
- TagsEnabled, TagsShowOnList, TagsInputOnList on/off
- OpacStarRatings
Couldn't test Babeltheque functionality as this requires an account.
Marcel de Rooy [Mon, 13 May 2013 07:05:55 +0000 (09:05 +0200)]
Bug 10052: QA Followup
As Katrin pointed out, the intranetstylesheet setting was not respected in the
help pages. The script help.pl does not use get_template_and_user which sets
these variables via Auth.pm but calls gettemplate.
This makes it necessary to 'manually' set them. This patch does that.
Evidently, this could be the case for some other templates vars too..
Test plan:
Apply all patches for 10052.
Change intranetstylesheet. Check a help page.
Change intranetcolorstylesheet. Check a help page.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Looks all good to me now.
Passes tests and still no string changes. Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10052 Followup for edithelp.tt and help-top.inc
A grep on the stylesheet names revealed that similar code was used in those
template files.
This patch moves the code from doc-head-close.inc to a new include file.
Now, doc-head-close and the help templates refer to that one file.
Test plan:
If you tested the preceding two patches, now you only need to:
1) Check included css via page source in browser from staff main page.
2) Check it also from some other location.
3) Check again from Help: e.g. /cgi-bin/koha/help.pl
4) Check again from Edit Help: /cgi-bin/koha/edithelp.pl
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template only, no string changes.
Tested according to test plan. Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10052: Make intranetstylesheet and intranetcolorstylesheet behave exactly like their opac counterparts
Allow a relative path (within theme/css) in intranetstylesheet too.
Allow a full path, local or remote with http(s), in intranetcolorstylesheet.
This restores consistency between opac and staff.
Test plan:
First: the patch with the db revision should have been applied. And also the
updatestructure step from the web installer should have been run.
Clear intranetstylesheet. Check included stylesheet with page source in browser.
Enter a full path with http or / in intranetstylesheet. Check again.
Enter a relative path (such as staff-global.css). Check again.
Clear intranetcolorstylesheet. Check if there is no reference with page source.
Enter a full path with http or / in intranetcolorstylesheet. Check reference.
Enter a relative path (such as blue.css). Check again.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Report 10052 makes the intranetstylesheet prefs behave like the opac ones.
This patch contains an optional db revision: If the pref intranetstylesheet is
not blank, and does not start with http, https or /, then prefix it with a
slash to make it an absolute path.
Test plan:
Before applying this patch:
1) Put intranet-tmpl/prog/en/css/staff-global.css into intranetstylesheet.
This works in the current staff client, but will be interpreted as relative as
soon as both patches for this report have been applied.
Apply the patch. And run: /cgi-bin/koha/installer/install.pl?step=3&op=updatestructure
Check the webinstaller warning and the pref value. There should be a slash
in front now. The css should still work.
Continue after applying this patch with:
2) Clear the intranetstylesheet pref. Run updatestructure again. No message: OK
3) Put /intranet-tmpl/prog/en/css/staff-global.css in intranetstylesheet.
Run updatestructure again. No message: OK
4) Prefix intranetstylesheet with http://[your-server-here]. Test again.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on last patch. Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Mon, 4 Mar 2013 07:12:15 +0000 (08:12 +0100)]
Bug 9722: Toggle display of hold notes with Edit notes button
Small adjustments, requested by Kyle:
1) Rename Show notes button. It is called now: Edit notes.
2) Do not hide all other notes fields. The Edit button now only toggles
the corresponding hold notes field.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Marcel de Rooy [Thu, 28 Feb 2013 07:53:36 +0000 (08:53 +0100)]
Bug 9722: Allow users to add notes when placing a hold in opac (dbrev)
Database revision for report 9722, adding new pref OpacShowHoldNotes.
This development is part of a larger one (see umbrella report 9721).
Test plan:
Run [your server]/cgi-bin/koha/installer/install.pl?step=3&op=updatestructure
Optionally, run a new install to test sysprefs.sql.
Or:
Edit sysprefs.sql, leave at least the last few lines including the new one.
And run from command line: mysql -p [yourdatabase] < [your-clone]/installer/data/mysql/sysprefs.sql
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Marcel de Rooy [Mon, 25 Feb 2013 14:21:57 +0000 (15:21 +0100)]
Bug 9722: Allow users to add notes when placing a hold in opac
The option of adding a note is controlled by new pref OpacShowHoldNotes.
This development is part of a larger one (see umbrella report 9721).
Test plan:
1 Verify if new pref is disabled by default. Place a hold. You can't add a note.
2 Enable the pref. Place a hold and add a note. Check in staff if you can see
the note in Catalogue Detail/Holds tab.
3 Toggle SingleBranchmode, AllowHoldDateInFuture/OPACAllowHoldDateInFuture,
OPACShowHoldQueueDetails, or OPACItemHolds.
Check the display of columns when placing a hold from opac.
4 Place a few holds with notes from opac search results in one run (enable
DisplayMultiPlaceHold). Check results in staff again.
Remark: A few lines already refer to mandatory note reasons. This is handled
in a subsequent report. No reason to worry.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Mathieu Saby [Sat, 18 May 2013 13:28:42 +0000 (15:28 +0200)]
Bug 9806 : QA Followup - use template plugin for branch names
With this followup, instead of passing the real names of the branches to template file, only the branchcodes are passed.
The branchcodes are translated into branchnames in template file, using the KohaBranchName template plugin.
To test :
do the same test as for main patch :
1) make some basketgroups with 0, 1, 2 baskets
2) make some basketgroups with different billing and deliveryplace
3) check the list of open and closed basketgroups
4) check action buttons are working like before
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mathieu Saby [Mon, 18 Mar 2013 19:30:46 +0000 (20:30 +0100)]
Bug 9806 : Add new columns to basket groups lists
Revised to fix whitespace problems. Cosmetic changes put in an other patch.
In the list of all the open/closed basketgroups for a vendor, you just
have the name of each basketgroup, and 3 action buttons.
It is not sufficient for libraries using basketgroup.
This patch adds the following columns :
- number (id of basketgroup)
- billingplace (name of the library)
- deliveryplace (name of the library, or "free delivery place")
- number of baskets in each basketgroup
To test :
1) make some basketgroups with 0, 1, 2 baskets
2) make some basketgroups with different billing and deliveryplace
3) check the list of open and closed basketgroups
4) check action buttons are working like before
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This is a nice improvement!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Thu, 23 May 2013 07:33:48 +0000 (09:33 +0200)]
Bug 10310: Followup Prevent submitting form with enter does not work with IE
Check e.target.type instead of using jQuery. Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 22 May 2013 13:49:26 +0000 (15:49 +0200)]
Bug 10310: Prevent submitting form with enter does not work with IE
I am not able to test this patch with IE...
I tested it with Chromium and FF and it works great.
This patch can be tested on the neworderempty.pl page Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Tue, 30 Apr 2013 19:33:48 +0000 (15:33 -0400)]
Bug 10036 - adding header search to additem page
The add item screen lacks a header search form. This patch adds the
cataloging header search include to additem.tt.
To test, apply the patch and add items to or edit items of an existing
record. The header search form should appear with options for cataloging
search and circulation.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Mon, 4 Feb 2013 13:16:58 +0000 (08:16 -0500)]
Bug 7718 - Remove itemnumber column from serials table
Remove the column 'itemnumber' from the table 'serial'. This is
a 1 to many relationship, and this reference does not make sense.
The 'serialitems' table handles the relationship between the 'items'
table and the 'serial' table.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Verify serial.itemnumber has been removed from the database
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Column removed. No errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 30 Jan 2013 14:19:58 +0000 (15:19 +0100)]
Bug 9507: prevent submit: refactor some code in a js file
This patch refactors some code in a js file.
Test plan:
On acqui/neworderempty.pl, acqui/orderreceive.pl and
serials/serials-edit.tt try to scan a barcode (or press enter) on the
form and check that it is not sent.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Have to note that the code for IE9 does not work. Before and after this patch.
If we refactor code, it would have been nice to resolve this too.
But I do not oppose pushing this patch.
The test uses 'an ancient Netscape property' window.Event (uppercase!) to make
the distinction between browers and event models. Some more documentation here
would be welcome too.
Owen Leonard [Fri, 17 May 2013 16:06:25 +0000 (12:06 -0400)]
Bug 10261: Link to patron files missing from circ-menu.tt
The link to patron files doesn't appear on some pages. That's because
the link was added to circ-menu.inc but not circ-menu.tt. Each is used
by different patron-related pages. This patch adds the missing link.
To test, enable the EnableBorrowerFiles system preference and view
members/pay.pl or members.paycollect.pl. The "Files" tab should appear
in the left-hand sidebar menu. Other patron pages should show the same.
Edit: Corrected scope of template variables which shouldn't have been
copied directly from circ-menu.inc without changing scope.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
all tests pass Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Paul Poulain [Mon, 30 Apr 2012 15:51:47 +0000 (17:51 +0200)]
Bug 6413 follow-up: fixing capital case & tabs
* switching from "Payment Note" to "Payment note"
* replaced tabs by 4 spaces in lines just before and after this fix, for consistent indenting
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Chris Hall [Thu, 26 Jan 2012 03:04:53 +0000 (16:04 +1300)]
Bug 6413 Added ability to add a note when paying or writing off a fine
Code will also respect notes when using the "Writeoff All" button but WILL NOT when using either the "Pay Amount" or "Pay Selected" buttons Fixed uri encoding of arguments
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
projects / koha.git / log