1. Select a biblio with some holds.
2. Place a hold with the "Hold starts on date"-attribute set to future.
3. More the specific hold up on the priority queue.
4. Add another normal hold, observe how it is prioritized with the "Hold starts on date"-hold, leaving old holds to the prioritization queue tail.
Unfair eh?
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 30907: Fix incorrect uses of Koha::Recall->item_level_recall
This attribute name was changed to *item_level* but this two remaining
places kept calling it with the old name.
To test, verify things don't explode when looking at checkouts with
recalls and also in the log viewer.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Mon, 6 Jun 2022 21:02:25 +0000 (21:02 +0000)]
Bug 30585: Fix library options on table settings for course_reserves_table
The table on course-details.pl has columns for both home library and jolding library,
but course_reserves_table in the Table configuration admin area only has a
single toggle for 'library'.
Hiding 'library' hides the home library column. Anything after that is off by one.
Hiding 'staff_note' actually hides the holding library column, 'link' hides
Public note, etc.
To test:
- Add a course and some course reserves
- Go to table configuration and hide 'staff note'
- Look at the list of course reserves for your course
- Verify the wrong column was hidden
- Apply patch
- The configuration area now shows holding_library and home_library
as separate options.
- Change the settings and verify everything now hides/displays correctly.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Michal Urban [Wed, 8 Jun 2022 15:40:42 +0000 (11:40 -0400)]
Bug 30768: Capitalizing "pin" in 2FA setup
Change of text from "pin" to "PIN" in the 2FA setup interface.
This slight changes clarifies that "PIN" is an acronym,
and increases user comprehension
To test:
1) Log in as an Administrator
2) Enable TwoFactorAuthentication
3) Log in to a user with superlibrarian permissions.
4) On the user profile page, click the "More" dropdown button,
click "Manage Two-Factor
5) Check that "pin" is displayed in lowercase, in both instances.
6) Apply patch.
7) Refresh the page and observe that "pin" has changed to "PIN"
8) Sign off.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Thu, 14 Apr 2022 12:39:05 +0000 (12:39 +0000)]
Bug 30508: Do not display OPAC message about block from holds when OPACHoldRequests is disabled
This patch adds a check for the OPACHoldRequests to determine whether a
message should be shown to patrons whose account is over the
maxoutstanding limit.
To test, apply the patch and set the "maxoutstanding" system preference
to a low value. Set OPACHoldRequests to "Allow."
- Log in to the OPAC as a patron who has outstanding fines or charges
which exceed the maxoutstanding value you set.
- You should see a message on the "Your summary" page, "Holds are
blocked because your fine balance is over the limit."
- Set OPACHoldRequests to "Don't allow" and refresh the "Your summary"
page in the OPAC. The message should disappear.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes an extra point after the number of shown results.
Test plan :
- don't apply patch
- run a report that brings you more than 20 results, e.g. SELECT * FROM biblio LIMIT 50
- see extra ' .' after the number of shown results
- apply patch
- run the report again and see the point isn't displayed anymore
- check the behaviour is still correct when you change the number of rows displayed
- sign off !
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Shi Yao Wang [Wed, 18 May 2022 14:59:39 +0000 (10:59 -0400)]
Bug 27519: Normalize Show/Don't show in system preferences
Replace Display/Don't display (and some other pairs) by Show/Don't show in system preferences.
Test plan:
1- Go to administration > system preferences
2- View any system preference with Display/Don't display pair of options
(e.g. OPACAcquisitionDetails)
3- Apply the patch
4- Refresh the page and notice it is now a Show/Don't show pair instead
5- Loop the steps with other system preferences until satisfied
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Thu, 19 May 2022 11:53:18 +0000 (12:53 +0100)]
Bug 30807: Migrate to patron-title in pay and paycollect
This patch updates the member-flags template to use the patron-title.inc
include wherever patron names are referenced.
Test plan
1) Navigate to a patron and click through to their accounts tab
2) Note how the patron name displays in the title, breadcrumb and
headings
3) Click through to make a payment
4) Note how the patron name displays in the title, breadcrumb and
headings
5) Apply the patch and reload the page
6) Confirm the patron name still appears in each location and is
consistently formatted and linked as you would expect
Note: This patch also removes a superflous hidden title form element
that was simply passed to and from the controller but not actually used
in any way.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Thu, 19 May 2022 11:34:01 +0000 (12:34 +0100)]
Bug 30806: Migrate to patron-title in member-flags
This patch updates the member-flags template to use the patron-title.inc
include wherever patron names are referenced.
Test plan
1) Navigate to a patron and click through to edit their permissions
2) Note how the patron name displays in the title, breadcrump and
headings
3) Apply the patch and reload the page
4) Confirm the patron name still appears in each location and is
consistently formatted and linked as you would expect
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Thu, 26 May 2022 11:54:44 +0000 (11:54 +0000)]
Bug 30813: (follow-up) Correct C4::Breeding call
This patch changes the call to use the fully qualified name and
adds import to C4::Breeding, Koha::MetaSearcher, and removes import
from Koha::MetadataRecord
Additionally it replaces missing fields from the update to using TransformMarcToKoha
Lastly, it reduces the fields used when saving the bredding record to the reservoir
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Fri, 20 May 2022 11:26:29 +0000 (11:26 +0000)]
Bug 30813: (follow-up) ImportBatch updates
Missed these in the original commits
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This was essentially a wrapper around TransformKohaToMarcOneField
After changing and updating, it seems easier not to create the intermediary
object and to just transform the data
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Thu, 19 May 2022 21:39:49 +0000 (21:39 +0000)]
Bug 30813: Remove TransformMarcToKohaOneField
To test:
1 - prove -v t/db_dependent/Biblio/TransformMarcToKoha.t t/db_dependent/Breeding.t
2 - Test Z3950 search in advanced catalog editor
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Thu, 19 May 2022 20:10:35 +0000 (20:10 +0000)]
Bug 30813: Adjust TransformMarcToKoha to take kohafields parameter
This adjusts the routine to accept an arrayref of koha fields to process
To test:
prove -v t/db_dependent/Biblio/TransformMarcToKoha.t t/Biblio.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Thu, 19 May 2022 19:53:16 +0000 (19:53 +0000)]
Bug 30813: Update TransformMarcToKoha to accept a hashref
This patch updates all the calls to pass a hasref rather than an array
It also removes the no longer used framework parameter
To test:
prove -v t/Biblio.t t/db_dependent/Biblio/TransformMarcToKoha.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Thu, 19 May 2022 19:21:27 +0000 (19:21 +0000)]
Bug 30789: Improve performance of AddBiblio
AddBiblio calls TransformMarcRecordToKoha. We are only interested in getting biblio and biblioitems info, so we can pass 'no_items' to save some field lookups
Benchmarking saw a ~75% increase in the performance of this call
To test:
1 - Stage and import some records
2 - Confirm it works the same before and after patch
3 - Add a biblio via cataloguing, confirm it works
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 30850: dbrev to inform existing users of the mapping change
This patch adds a message in a dbrev to inform users of existing
installations that they might want to add a mapping from 110$a to
biblio.author
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 30850: Add default mapping for biblio.author to 110$a (MARC21)
This patch adds a mapping to biblio.author in 110$a in the default framework
Note: I added lots of tests for different scenarios, I'm not sure it's necessary to test everything. I don't want this to be a deterrent! The first one is necessary, the rest are use cases.
Note 2: I don't work with ktd so maybe the steps for loading new frameworks are different, sorry about that, I honestly don't know another way to do it.
Test 1 - basic test
Before applying patch,
1- Create a new record with a corporate author (110$a)
2- Query the database, author should be null
select author from biblio where biblionumber = XXXX;
(do other control tests if you want/need before applying the patch)
3- Apply patch
4- Delete frameworks
delete from biblio_framework;
delete from marc_subfield_structure;
delete from marc_tag_structure;
5- Load new frameworks
./misc/load_yaml.pl -f installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.yml --load
6- Edit the record, don't change anything and save it
7- Query the database, author should be filled
8- Go to Administration > MARC Bibliographic framework test, everything should be OK
Test 2 - checkouts table
Before applying patch,
1- Create a new record and item with a corporate author (110$a)
2- Checkout the item for that record to a patron
Note that the author is not listed in the checkouts table
3- Apply patch
4- Delete frameworks
delete from biblio_framework;
delete from marc_subfield_structure;
delete from marc_tag_structure;
5- Load new frameworks
./misc/load_yaml.pl -f installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.yml --load
6- Edit the record, don't change anything and save it
7- Refresh the checkouts table, the author should be listed
Test 3 - notices and slips
Before applying patch,
1- Go to Tools > Notices & slips
2- Edit ISSUESLIP and add <<biblio.author>> after <<biblio.title>>
3- Save the notice
4- Create a new record and item with a corporate author (110$a)
5- Checkout the item for that record to a patron
6- Print the checkout slip
Note that the author is not listed on the slip
7- Apply patch
8- Delete frameworks
delete from biblio_framework;
delete from marc_subfield_structure;
delete from marc_tag_structure;
9- Load new frameworks
./misc/load_yaml.pl -f installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.yml --load
10- Edit the record, don't change anything and save it
11- Print the checkout slip, the author should be listed
Test 4 - labels
Before applying the patch,
1- Create a new record and item with a corporate author (110$a)
2- Go to Tools > Label Creator
3- Create a label batch with that item
4- Export the batch in PDF using the Avery 5160 template and 'Label test' layout
Note that the author is not listed
5- Apply patch
6- Delete frameworks
delete from biblio_framework;
delete from marc_subfield_structure;
delete from marc_tag_structure;
7- Load new frameworks
./misc/load_yaml.pl -f installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.yml --load
8- Edit the record, don't change anything and save it
9- Export the label batch again, the author should be listed
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
David Cook [Thu, 12 May 2022 04:09:58 +0000 (04:09 +0000)]
Bug 30738: Log warnings for background MARC import
This change logs warnings from the CGI background MARC import.
Test plan:
0) Apply patch
1) Export a record with an item
2) Update the 952$f subfield to "Circulation" (any value over 10 chars)
3) Import the record and try to add the item
4) The import will stay stuck with "Importing" status and 0% job
progress
5) Check the /var/log/koha/kohadev/intranet-error.log file
and notice there's an error with the following text:
"Data too long for column 'coded_location_qualifier' at row 1"
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 30923: Remove EXPERIMENTAL mark on RESTOAuth2ClientCredentials
The feature is not experimental at all.
To test:
1. Search for the RESTOAuth2ClientCredentials syspref
=> FAIL: It says it is an experimental feature
2. Apply this patch and reload
3. Repeat 1
=> SUCCESS: No longer marked as experimental
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note: It seems that we do not need a new dbrev for master. A developer
could follow test plan below to correct if really needed.
Test plan:
NOTE: When you check show create table, verify that you see an index for category_code and a foreign key called borrower_attribute_types_ibfk_1.
[1] cp installer/data/mysql/db_revs/211200041.pl installer/data/mysql/atomicupdate/
[2] run updatedatabase; check show create table
[3] alter table borrower_attribute_types drop foreign key borrower_attribute_types_ibfk_1; alter table borrower_attribute_types drop index category_code; RUN updatedatabase again; check show create table
[4] alter table borrower_attribute_types drop foreign key borrower_attribute_types_ibfk_1; ALTER TABLE borrower_attribute_types ADD CONSTRAINT category_code_fk FOREIGN KEY (category_code) REFERENCES categories(categorycode); RUN updatedatabase again; check show create table
[5] rm installer/data/atomicupdate/211200041.pl
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Thu, 26 May 2022 16:44:35 +0000 (16:44 +0000)]
Bug 13614: Replace usage of YUI on basket groups page
This patch updates the basket groups interface so that it doesn't rely
on YUI to move baskets in and out of groups. The patch also removes
all YUI assets and many long-obsolete references to YUI-related classes
and IDs.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client)
- Go to Acquisitions.
- Locate a vendor with multiple closed baskets.
- Click "Basket groups" in the sidebar menu.
- Create or edit a basket group.
- On the basket group page you should see the basket group form in one
column and ungrouped baskets in another.
- Both grouped and ungrouped baskets should be in a sortable
DataTable.
- Test that when you click the "Add to group" button on an ungrouped
basket the row is removed from the table of ungrouped baskets and
added to the table of grouped baskets.
- The button text on the row should now read "Remove."
- Test the reverse operation: Clicking "Remove" on a grouped basket
should move it to the table of ungrouped baskets.
- Test that when all baskets are moved out of either of the tables a row
is displayed with a message specific to that table, e.g. "There are no
ungrouped baskets."
- Test that the basket group saves correctly when zero or more baskets
are added to the group.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Tue, 31 May 2022 05:58:59 +0000 (07:58 +0200)]
Bug 30539: (bug 24161 follow-up) Fix typo in DBrev
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 30057: Move virtualshelf-related exceptions to a separate library
This patch moves the not-generic virtualshelf-related exceptions to
their own file. Callers are adjusted as required.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/Virtualshelves.t
=> SUCCESS: Tests pass
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass
4. Check virtualshelves work as expected
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Thu, 2 Jun 2022 14:23:08 +0000 (10:23 -0400)]
Bug 30891: SMS provider shows on staff side even if SMS::Send driver is not set to "Email"
It appears that in my original submission ( Bug 9021 ),
I hid the SMS provider selector unless the SMS::Send
driver was set to "Email", but only on the OPAC,
not on the staff interface!
Test Plan:
1) Set SMSSendDriver to anything except "Email"
2) Note the SMS Provider pulldown shows in the patron editor
3) Apply this patch
4) Reload the page, SMS Provider id should now be gone
5) Set SMSSendDriver to "Email"
6) Reload the page, SMS Provider should now be shown
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 29607: Store the discount amount correctly when importing and order from a file
This bug fixes how the discount amount for an order is stored, when an order is added to a basket using "From staged MARC records".
Test plan:
1. Export a record (without the items) (Tools > Catalog > Export data).
2. Delete the record from the catalog (including any items).
3. Stage the record for import (Tools > Catalog > Stage MARC records for import).
4. Create a new vendor with a discount of 25%. (Or select and existing vendor that has a discount). (Acquisitions > New vendor)
5. Create a new basket for the vendor. (Acquisitions > Manage orders > search for vendors > New > Basket).
6. Add to the basket using "From a staged file":
. select "Add orders" next to the staged file
. select the record to add to the order
. enter a price
. leave the discount field blank
. select a fund
. select "Save"
==> The order is created!
7. Modify the order - note that the discount is showing on the form as .25% instead of 25%, also note that the discount amount is calculated correctly.
8. Check what is recorded in the database:
. koha-mysql kohadev
. select * from aqorders;
==> discount field for the basket item shows as 0.2500
9. Change the discount to 25%. Run step 8 again - discount amount will be correctly shown as 25.0000
10. Apply the patch.
11. Repeat steps 1-9 - discount amount is shown and calculated correctly.
12. Test modifying the discount amount - should be calculated and shown correctly.
13. Sign off!
See additional comments in the bug description.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Mon, 28 Mar 2022 17:28:50 +0000 (17:28 +0000)]
Bug 30388: Fix some errors in the template for ordering from a MARC file
This patch fixes a few markup errors in the addorder2709 template. The
modal dialog markup is corrected and moved out of the loop of records so
that it doesn't create repeating id attributes. Obsolete CSS is removed,
fixing the width of the MARC preview modal.
The calendar include is added, fixing a Flatpickr error in the console.
Double ID attributes are removed from the Statistics 1 and Statistics 2
fields.
To test, apply the patch and test the process of adding an order to a
basket from a staged MARC file. Test in particular:
- The MARC and Card previews
- The "Date acquired" field under the "Item information" tab should
trigger a Flatpickr widget.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Mon, 28 Mar 2022 14:38:51 +0000 (14:38 +0000)]
Bug 30384: (follow-up) Add markup comments
This patch adds comments to the template to highlight the markup
structure.
This patch should have no effect on the page's appearance or
functionality.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Mon, 28 Mar 2022 14:11:19 +0000 (14:11 +0000)]
Bug 30384: Reindent template for ordering from a MARC file
This patch updates the template for ordering from a MARC file so that
the indentation is consistent.
This patch does not fix a couple of bugs which will be fixed in a later
patch: The MARC modal window has the wrong width, and there is a
Flatpickr error in the console.
To test apply the patch and go to Acquisitions -> Vendor -> Basket ->
Add to basket -> From a staged file.
- Click "Add orders" next to the staged file you want to use.
- On the "Add orders" page, test that everything still works correctly:
- Tabs work correctly
- JavaScript controls (select all, show inactive, etc.) work
- MARC and Card previews work
- Adding orders works
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Just modifying the hint provided in patrons' messaging preferences to
allow either + or 00 for international formats.
No test plan needed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When registering a phone number for SMS alerts, the number goes through
a regex filter to make sure the number is valid. One of the formats used
in Europe is 00 AAA XXXXXXXXX (A = country indicator) and it is not
supported.
This patch adjusts the regex to either accept 00 AAA XXXXXXXXX or
+AAAXXXXXXXXX in this case. (Note : +AAA and 00AAA are mutually exclusive).
To test:
1) You need to have installed a SMSAlert plugin. Make sure the
SMSSendDriver syspref is also set up with your SMS plugin of choice.
2) Pick a patron and edit its profile.
3) In the messaging preferences fieldset, under SMS number, enter any
number with the format 00 AAA XXXXXXXXX (ie : 00111123456789).
Try to save the modification : you should have an error message.
4) Try instead a number with the format +AAAXXXXXXXXX (ie : 111123456789), that one should be accepted.
5) Save your modification then check that the number has been changed.
6) Apply patch.
7) Repeat step 3 to 5.
8) Observe the error is gone.
9) Try it once more with the format +00 AAA XXXXXXXXX (+00111123456789),
that format should not be accepted: this is intentional.
10) Sign off.
Thanks-to: Didier Gautheron <didier.gautheron@biblibre.com> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Fri, 6 May 2022 15:21:43 +0000 (15:21 +0000)]
Bug 30713: Patron entry should limit date of birth selection to dates in the past
This patch adds to the configuration of the date of birth field in the
patron entry form so that the calendar widget prohibits the selection of
a date in the future.
To test, apply the patch and open a patron record for editing. Try to
select a birth date in the future using the calendar widget. You should
be limited to a selection of today or before.
Confirm that clicking the "Yesterday" and "Today" shortcuts in the
calendar widget works correctly.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Wed, 1 Jun 2022 12:29:59 +0000 (14:29 +0200)]
Bug 30864: Add validation to password_expiry_days
When creating a patron category or editing an existing one, there is no validation for the "Password expiration" field.
If letters or other characters are entered, there is no error message and if not a number whatever is entered is not saved.
To test:
1. Go to Administration > Patrons and circulation > Patron categories.
2. Add a new patron category (or edit an existing category).
3. For the "Password expiration" field, enter letters or characters such as L$%.
=> Note that you are prompted to "Please enter only digits"
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marion Durand [Fri, 10 Sep 2021 14:25:34 +0000 (16:25 +0200)]
Bug 29260: 210a is reported to Autor (meeting/conference) when upgrading an authority through Z3950
When upgrading an authority with Z39.50, the field 2XX is sent into the
research grid.
The field 210a is sent into the search field "Author
(meeting/conference)". Or a collective authority is more often a
corporation than and meeting so librarian has to copy and paste this
data. (In unimarc field 210a is used both for corporation and meeting.)
This patch makes 210a field be sent into the search field "Author
(corporate)" instead of the "Author (meeting/conference)" one.
1- Find an authority with collectivity type (with a field 210a).
2- Click on "Edit" then on "Edit record"
3- Click on "Replace record via Z39.50/SRU search"
4- See that the field 210 is reported in the search grid in "Author
(meeting/conference)" field
5- Apply the patch
6- Go throug step 1 to 3 again
7- See that the field 210 is now reported in the search grid in "Author
(corporate)" field
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Mon, 16 May 2022 19:51:41 +0000 (19:51 +0000)]
Bug 30778: Remove ModAuthInBatch
1 - git grep ModAuthInBatch
2 - Confirm none of these occurences are calls
3 - Apply patch
4 - git grep ModAuthInBatch
5 - No occurences
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Mon, 16 May 2022 19:50:20 +0000 (19:50 +0000)]
Bug 30778: Remove ModBiblioInBatch
To test:
1 - git grep ModBiblioInBatch
2 - Confirm these occurences are not calls
3 - Apply patch
4 - git grep ModBiblioInBatch
5 - No occurences
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
David Cook [Thu, 28 Apr 2022 05:48:33 +0000 (05:48 +0000)]
Bug 30636: Show notforloan availability correctly in ILS-DI
This patch adds the Koha::Item->is_notforloan() method which checks
the item status of "notforloan" and it checks the effective item type
to see if it's marked as "notforloan". This change brings ILS-DI in line
with the catalogue which displays "Not for loan" for both those scenarios.
0. Don't apply patch yet
1. Enable ILS-DI system preference
http://localhost:8081/cgi-bin/koha/admin/preferences.pl?op=search&searchfield=ILS-DI
2. Change Item types to "Not for Loan" for Books
http://localhost:8081/cgi-bin/koha/admin/itemtypes.pl?op=add_form&itemtype=BK
3. Note that book is listed as "Not for loan" in catalogue
http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=29&searchid=scs_1651115075364
4. Note that book is listed as "available" via ILS-DI
http://localhost:8080/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=29&id_type=bib
5. Apply patch and restart starman (ie koha-plack --restart kohadev)
6. Note that book is listed as "not available" and "Not for loan" via ILS-DI
http://localhost:8080/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=29&id_type=bib
--
7. prove t/db_dependent/Koha/Item.t
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kevin Carnes [Wed, 25 May 2022 10:54:25 +0000 (10:54 +0000)]
Bug 30844: The OPAC detail page's browser is limited to the current page of results when using Elasticsearch
When viewing the detail page of the first or last record of a result page,
it's not possible to browse to another page when using Elasticsearch.
To test:
1) Search for "*" in the OPAC
2) Click on the last result of the page
3) Observe that you cannot browse to the next page
4) Apply the patch
5) Search for "*" in the OPAC
6) Click on the last result of the page
7) Observe that you can browse to the next page
8) Sign off
Sponsored-by: Lund University Library Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Wed, 1 Jun 2022 12:36:52 +0000 (14:36 +0200)]
Bug 30726: Fix "yesterday" when limited to past dates
Test plan:
Go to "Patrons with no checkouts" report, /cgi-bin/koha/reports/borrowers_out.pl
Select "Yesterday"
=> it automatically selects the previous day's date and populates the form field
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Wed, 1 Jun 2022 12:54:34 +0000 (14:54 +0200)]
Bug 30746: Fix JS error on opac-memberentry
Empty PatronSelfRegistrationBorrowerMandatoryField and PatronSelfRegistrationBorrowerUnwantedField
Go to opac-memberentry.pl
Notice the JS error
Uncaught TypeError: j is undefined
Apply this patch
Go to opac-memberentry.pl
=> no JS error
Fill the pref with some values
Go to opac-memberentry.pl
=> Confirm that the fields you marked as mandatory as flagged accordinly
on the UI
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 18 May 2022 14:21:35 +0000 (14:21 +0000)]
Bug 23659: Add DefaultHoldPickupLocation system preference
On the staff side behaviour differs for default pickup location when placing a hold or
placing an overridden hold. Additionally, the behaviour has changed betwee master and stables
We should provide a consistent default, and allow the library to specify their choice
Note this only affects staff client as there is only a single dropdown on OPAC and it is not
tied to items
To test:
1 - Apply patch
2 - Update database
3 - Find a record with items from various branches, and at least one with a different home/holding branch
4 - Ensure there is an item that requires override to hold, and AllowHoldPolicyOverride is enabled
4 - Attempt to place hold
5 - Confirm all dropdowns default to logged in library
6 - Set DefaultHoldPickupLocation to item's home branch
7 - Refresh and confirm all dropdowns match item home library except biblio level hold - still logged in library
8 - Set DefaultHoldPickupLocation to item's holding branch
9 - Refresh and confirm defaults
10 - Mark one of the items holding library as 'not a pickup location' in Admin->Libraries
11 - Refresh and confirm dropdown is now empty for that item
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Fri, 3 Jun 2022 11:35:34 +0000 (11:35 +0000)]
Bug 30893: Fix documentation in update_patrons_category.pl
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Tue, 31 May 2022 06:23:30 +0000 (08:23 +0200)]
Bug 30868: (bug 29684 follow-up) Fix borrowernumber var in template
borrower_data does not contain the borrowernumber, it is sent
separately.
Test plan:
1. Edit a patron record (for example: Henry Acevedo).
2. Note that the URL is http://127.0.0.1:8081/cgi-bin/koha/members/memberentry.pl?op=modify&destination=circ&borrowernumber=19
3. Change date of birth to yesterday.
4. Save.
5. Error message displayed above the Save and Cancel buttons:
The following fields are wrong. Please fix them.
- Patron's age is incorrect for their category. Ages allowed are 18-999.
6. Note that the URL is now http://127.0.0.1:8081/cgi-bin/koha/members/memberentry.pl
7. Fix date of birth (for example: change year to 2000).
8. Select Save.
=> Without this patch you get: "Patron not found. Return to search."
=> With this patch applied the patron's data is saved
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Slava Shishkin [Fri, 3 Jun 2022 14:47:46 +0000 (17:47 +0300)]
Bug 30884: Fix jQuery selector to correctly detect active tab
To reproduce:
1. Go to /tools/modborrowers.pl and fill form Card number list with data and click Continue.
2. It should give "No patron card numbers or borrowernumbers given." warning.
3. Using the browser inspector tool see that post fields cardnumberlist or borrowernumberlist
is sent with empty data.
Apply the patch, and then:
1. Fill form Card number or Borrowernumber list and click Continue.
2. Get the result: table with patrons for editing or warning about not found number.
3. Using the inspector tool see that request has data from the active tab in the form.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Aleisha Amohia [Thu, 2 Jun 2022 22:59:56 +0000 (22:59 +0000)]
Bug 30886: Show pending recall on item on OPAC
The 'completed' flag was causing the wrong status to be shown, but we
can also give a more useful message to the patron.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place a recall on that item.
5) Go back to the staff client and check the item in. Confirm the recall
as waiting for Patron A.
6) Go back to the OPAC record page and look at the holdings table.
Notice the status still says the item is Available.
7) Apply patch, restart services, refresh the OPAC.
8) Confirm the holdings table status now says the item has a pending
recall.
Sponsored-by: Catalyst IT Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Thu, 2 Jun 2022 17:24:21 +0000 (17:24 +0000)]
Bug 30892: (bug 30742 follow-up) Send single bib as a holdable bib
To test:
1. Try placing hold
2. Everything seems to work but no hold gets placed.
3. Apply patch
4. Verify holds are no placed correctly.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Aleisha Amohia [Thu, 2 Jun 2022 21:23:55 +0000 (21:23 +0000)]
Bug 30885: Display recall data correctly
This page does not pull the recall columns correctly.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place an item-level recall on that item.
5) Go back to the staff interface and search for the item. Confirm that when you go
to the record detail page, it explodes and errors are shown.
6) Apply patch and refresh page.
7) Confirm page loads as expected.
8) Check the Status information for the item in the Holdings table.
Confirm it shows the recall information correctly.
9) Check in the item and confirm the recall as waiting for Patron A.
10) Go back to the record detail page and confirm the Status information
for the item shows as Waiting in the Holdings table.
Sponsored-by: Catalyst IT Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 30876: Fix wrong call to ->search in list context
The code is clearly incorrect as ->search no longer returns a list when
called in list context.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Tue, 24 May 2022 18:27:30 +0000 (18:27 +0000)]
Bug 30840: Add support for barcode filters to course reserves
This bug adds support for barcode filters on the inputs in the course reserves module.
To test:
1 - Set itemBarcodeInputFilter to 'Remove spaces from'
2 - Find a barcode in your system and add spaces between each characters
e.g. 3 9 9 9 9 0 0 0 0 0 0 8 1 8
3 - Past that barcode into the checkin box, success
4 - Browse to course reserves, ensure you have a course or create on
5 - Test adding a reserve, batch adding a reserve, and batch removing reserves
6 - The pasted barcode does not in any
7 - Apply patch and restart
8 - Pasted barcode with spaces can now successfuly be added, batch added, and batch removed from courses
Signed-off-by: Jason Robb <jrobb@sekls.org> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Lucas Gass [Thu, 27 Jan 2022 16:55:34 +0000 (16:55 +0000)]
Bug 29961: Make horizontal scroll bar always visible on acqui/z3950_search.pl
To test:
1. In Acquisitions make a basket and add something "From an external source"
2. Search for a title and click on the 'MARC' button, make sure the MARC prview is both tall and wide.
3. You will not see the horizontal scroll bar unless you scroll all the way to the bottom of the preview.
4. Apply patch.
5. Try steps 1 & 2 again, this time you should see the horizontal scroll bar as soon as the MARC prveiw loads.
Note: I put the CSS on multiple lines for better readability
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Sat, 14 May 2022 12:07:17 +0000 (12:07 +0000)]
Bug 30756: Further adjustments to Koha_Authority.t
Remove use of exported_records file in favor of TestBuilder.
Remove conditional tests with SKIP block. Create reservoir record.
Test plan:
Run t/db_dependent/Koha_Authority.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Sat, 14 May 2022 07:42:42 +0000 (07:42 +0000)]
Bug 30756: Ground work for improving Koha_Authority.t
Move stuff into two subtests.
Test plan:
Run t/db_dependent/Koha_Authority.t.
If you have no imported auths, you will still see skips.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 30855: (follow-up) Rewrite tests using Basic authentication
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch renames the route to make it consistent for future additions.
To test:
1. Run
$ git grep 'matches/chosen'
=> FAIL: all occurences use /api/v1/import/
2. Apply this patch
3. Run:
$ git grep 'matches/chosen'
=> SUCCESS: All occurences have '/api/v1/import_batches/'
4. Run:
$ kshell
k$ prove t/db_dependent/api/v1/import_record_matches.t
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 18 May 2022 15:08:39 +0000 (15:08 +0000)]
Bug 27697: Only preopulate search when we have found a single biblio
This patch uses the url parameter we created in 23475 to determine whether
we should populate the search bar or not
Note - a bookmark with this param will still populate search term with last search
To test:
1 - Search staff client for 'cat'
2 - Browse to a patrons checkouts and click on a title, or just go directly to a details page:
http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=2850
3 - Search bar says 'cat'
4 - Apply patch
5 - Repeat 1-2
6 - Search bar is not populated
7 - Search "dalek war box set" or a term that finds a single record in your instance
8 - Search bar is populated
9 - Note url like: http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=2850&found1=1
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Fridolin Somers [Thu, 19 May 2022 03:50:13 +0000 (17:50 -1000)]
Bug 30781: Fix warning in GetPreparedLetter
Test by running :
prove t/db_dependent/Letters.t
Check you dont see warning :
Use of uninitialized value $val in substitution iterator
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Fridolin Somers [Thu, 19 May 2022 03:47:18 +0000 (17:47 -1000)]
Bug 30781: Add unit test for substitute with undefined value
Add unit test that generates warn.
This may be usefull as no regression test.
Run prove t/db_dependent/Letters.t
You see warn :
t/db_dependent/Letters.t .. 1/84 Use of uninitialized value $val in substitution iterator at /kohadevbox/koha/C4/Letters.pm line 607.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle Hall [Tue, 22 Mar 2022 18:14:52 +0000 (14:14 -0400)]
Bug 30337: Holds to Pull ( pendingreserves.pl ) ignores holds if priority 1 hold is suspended
Holds to Pull ( pendingreserves.pl ) ignores holds if priority 1 hold is suspended,
and shows the wrong number of "patrons with holds" which presumably tells the
librarian how many copies to pull from the shelves.
Test Plan:
1) Create a record with one or more holdable items
2) Place two holds on the record
3) Note they show in the holds to pull report
4) Suspend the priority 2 hold
5) Note the report continues showing that 2 patrons have holds
6) Resume the priority 2 hold
7) Suspend the priority 1 hold
8) Note the hold disappears from the holds to pull report
9) Apply this patch
10) Restart all the things!
11) Reload the holds to pull report
12) The report should show one hold that needs an item pulled to fill it!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Wed, 13 Apr 2022 12:18:13 +0000 (12:18 +0000)]
Bug 30523: Quiet console warning about missing shortcut-buttons map file
This patch updates the Flatpickr plugin shortcut-buttons which adds the
"Yesterday," "Today," and "Tomorrow" links to Flatpickr widgets. This
updates it to the latest version, 0.4.0.
The file is modified in two ways: The version information is added to
the top of the file, and the sourceMappingURL line is removed from the
bottom. This quiets browser console warnings about a missing map file.
To test:
- apply the patch and clear your browser cache.
- Go to Circulation -> Check out and check out to a patron.
- Click "Checkout settings" and click the "Specify due date" field.
- In the pop-up calendar, test all controls, including the shortcut
links, to confirm that everything works as before.
- In the browser console there should be no warning related to
shortcut-buttons-flatpickr. (Firefox didn't have the warning, Chromium
can be used.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Julian Maurice [Tue, 20 Jul 2021 12:45:35 +0000 (14:45 +0200)]
Bug 28723: Fix holds table display when a biblio has no title
Test plan:
1. Create a biblio without title, then create an item for this biblio.
2. Place a hold on it.
3. Go to the patron detail page and click on the Holds tab
4. Confirm that holds are correctly displayed
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
== Test plan ==
1. Go to http://localhost:8081/cgi-bin/koha/patroncards/manage.pl?card_element=layout
2. See that the page title in your browser window title is wrong because it contains <span>
3. Go to http://localhost:8081/cgi-bin/koha/labels/label-manage.pl?label_element=batch
4. See that the page title in your browser window title is wrong because it contains <span>
5. Go to http://localhost:8081/cgi-bin/koha/admin/aqbudgetperiods.pl
6. Administration => Budgets => Click on a budget => planning => plan by months
7. See that the page title in your browser window title is wrong because it contains <span>
8. Refresh the pages and see that the titles are correct
9. Sign off :)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 28529: Make biblio-level hold itemtype count against max rules
The current situation is that biblio-level holds can be assigned an item
type, so they can only be fulfilled by items matching that specified
item type (be it item-level itype or the fallback to biblio-level).
But there's the situation in which max holds limits for a specific item
type can be overridden by using biblio-level holds with item type
selection (AllowHoldItemTypeSelection) enabled.
To test:
1. Have a patron of category 'Staff' (S)
2. Have 3 records with items with the 'BK' item type, and maybe others
3. Enable AllowHoldItemTypeSelection
4. Set a limit of 2 max holds for that category+item type
5. In the OPAC. Place bibio-level holds, with item type contraint to 'BK' on those 3 records
=> FAIL: You can place the 3 holds
6. Cancel the holds
7. Apply this patch and restart all
8. Repeat 5
=> SUCCESS: You can only place 2 holds
9. Run:
$ kshell t/db_dependent/Reserves.t
=> SUCCESS: Tests pass!
10. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Thu, 12 May 2022 07:05:50 +0000 (07:05 +0000)]
Bug 30731: Remove Readonly::XS::MAGIC_COOKIE
This variable does not make sense anymore, since the Readonly::XS
module is not listed in the cpanfile. So it will not be required
the versions_info loop.
Test plan:
Run t/Installer_PerlModules.t again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Wed, 11 May 2022 14:26:06 +0000 (14:26 +0000)]
Bug 30731: Silence noisy CPAN modules in C4::Installer::PerlModules
Main change is replacing 'no warnings' by local $SIG{__WARN__}.
The modules are sorted now too. This will make results of requiring
them one after the other a more predictable experience and improves
the output of koha_perl_deps.
Test plan:
Run about. Check plack intranet log.
Run koha_perl_deps.pl -a
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Wed, 11 May 2022 14:35:18 +0000 (14:35 +0000)]
Bug 30731: Unit tests
Installer_pm.t can safely be discarded, having Installer_PerlModules.t.
Note: Without the second patch, the test about versions_info being silent
might fail. With the second patch, it should pass.
Note that since the order of requiring the cpan modules varies (without
the second patch), the results (potential warnings) vary too.
Test plan:
Run t/Installer_PerlModules.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Wed, 25 May 2022 08:04:58 +0000 (10:04 +0200)]
Bug 30842: 2FA - Allow at least one old TOTP
We allow one old token when we are setting the two-factor auth, we
should reuse the same settings when validation the authentication
itself.
Test plan:
Setup 2FA for your logged-in user
Logout/Login
Have a look at the code and wait for 30 sec before using it (< 1min
however)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
David Nind [Wed, 18 May 2022 02:21:14 +0000 (02:21 +0000)]
Bug 30786: Fix capitalization in advanced search system preferences
This fixes the capitalization in the descriptions for the
AdvancedSearchTypes and OpacAdvancedSearchTypes system preferences.
Test plan:
1. In the staff interface, search the system preferences for
'AdvancedSearch'.
2. Review the current descriptions for the AdvancedSearchTypes and
OpacAdvancedSearchTypes system preferences.
3. Note that "..Shelving Location.." is used instead of "..Shelving
location..".
4. Apply the patch.
5. Refresh the page.
6. Sentence case is now used for "Shelving location" in the
descriptions (as per coding guideline HTML4: Upper and lower cases
in strings).
7. Sign off.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Fri, 20 May 2022 07:43:15 +0000 (09:43 +0200)]
Bug 30788: Fix warning in Overdues.pm when fine is empty in circ rules
Argument "" isn't numeric in multiplication (*) at /usr/share/koha/lib/C4/Overdues.pm
To test:
* Create a issuing rule where fine is empty, but a fine interval is set.
Fine amount: empty
To do this, remove the 0 displayed in the input field before saving.
Fine charging interval: 5 or any other numeric value
When to charge: Start of interval
Fine grace period: 0
* Check out an item with the due date yester (use specify due date)
* Run misc/cronjobs/fines.pl -v
* You should see above warn in the output
* Apply patch
* Rerun fines.pl, there should be no warn.
* Run:
t/db_dependent/Circulation/CalcFine.t
t/db_dependent/Fines.t
t/db_dependent/Circulation.t
t/db_dependent/Overdues.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Joonas Kylmälä [Sat, 21 May 2022 19:23:32 +0000 (19:23 +0000)]
Bug 30828: Remove useless 'type' parameter in placerequest.pl
To test:
1) Grep for placerequest.pl in the source code and check that
request.tt is the only place where the type parameter is passed.
Signed-off-by: David Nind <david@davidnind.com>
JD amended patch: adjust commit title Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Tue, 17 May 2022 11:19:19 +0000 (11:19 +0000)]
Bug 30774: Typo: i %sEdit %sReserve %s
This patch removes an out of place "i" and replaces it with a space. The
patch also removes obsolete CDATA markers in the page's JavaScript.
To test, apply the patch and go to Course reserves.
- Create a course if necessary, then view the details of your course.
- Click the "Add reserves" button.
- Enter a barcode or biblionumber.
- On the next page, the heading "Reserve [title] for [course]" should
look correct, with no extra "i" at the beginning of the line.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
David Nind [Sat, 28 May 2022 18:55:59 +0000 (18:55 +0000)]
Bug 30772: (follow-up) Age restriction message
Improve age restriction message.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Tue, 17 May 2022 12:04:41 +0000 (12:04 +0000)]
Bug 30772: Terminology: Replace instances of "reserve" with "hold"
There were several templates where we were still using the term
"reserve" instead of "hold." This patch corrects the ones I found,
including in a couple of HTML comments.
To test, apply the patch and confirm that the changes look correct and
affect only the relevant term.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/selenium/regressions.t
=> FAIL: You see several
item-level_itypes set but no itemtype set for item (985) at /kohadevbox/koha/Koha/Schema/Result/Item.pm line 905.
2. Apply this patch
3. Repeat 1
=> SUCCESS: No more item type warnings
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Tue, 17 May 2022 12:30:28 +0000 (12:30 +0000)]
Bug 30761: Fix typos in OPAC reset password template
This patch corrects the word "PLease" to "Please." The patch also adds
some periods at the end of some alert strings to make punctuation
consistent between different alerts.
To test, an inspection of the patch is probably enough. The main fix
(the "PLease") only appears when an unknown error occurs.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch changes the word 'langues' to 'languages' in the description
of the following system preferences:
- OPACXSLTDetailsDisplay
- OPACXSLTListsDisplay
- OPACXSLTResultsDisplay
- XSLTDetailsDisplay
- XSLTListsDisplay
- XSLTResultsDisplay
To test:
1- Apply patch
2- Check the aforementioned system preferences and make sure the descriptions say 'languages'
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 30853: Add description for baskets in swagger.yaml
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Thu, 14 Apr 2022 12:20:09 +0000 (12:20 +0000)]
Bug 30528: Process limits before handling CCL query
This patch moves the code that handles limit processing before that for CCL queries to ensure that special limit cases (branch, multibranch, etc) are handled before adding the limits to the query string
To test:
1 - Apply unit tests patch only
2 - prove -v t/db_dependent/Search.t
3 - It fails
4 - Apply this patch
5 - It passes!
6 - Test searching and confirm things work as epxected
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Thu, 14 Apr 2022 12:19:22 +0000 (12:19 +0000)]
Bug 30528: Unit tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Tue, 31 May 2022 09:29:57 +0000 (11:29 +0200)]
Bug 30870: Don't skip tests if Test::Deep if not installed
We are using Test::Deep in different tests, but from t/db_dependent/Koha.t the tests are skippted if the module is not installed.
We must assume the module is installed
Test plan:
prove t/db_dependent/Koha.t
should return green in ktd
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
projects / koha.git / log