Jonathan Druart [Tue, 29 Sep 2020 09:43:00 +0000 (11:43 +0200)]
Bug 26562: [19.11.x] Removes 'searches' from localStorage on logout
A user recently logged in will inherit the "searches" item stored in localStorage.
To recreate:
Log in with user A, do some searches
Note that the "searches" item is filled in with the search queries
Logout and log in with user B
Note that the "searches" item is still there
Bug 26322: [19.11.x] Permissions not checked correctly for plugins
This patch fixes the logic in a condition to address the fact that
permissions are not checked for plugins. This was due to bad parenthesis
pairing and the lack of good tests for this.
To test:
1. Apply the regression tests patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/REST/Plugin/PluginRoutes.t
=> FAIL: Tests fail because of bad logic
3. Apply this patch
4. Repeat (2)
=> SUCCESS: Tests pass!
5. Verify the tests cover the use cases that are needed:
- Anonymous access
- Real user with wrong permissions (parameters => 1)
- Real user with right permissions (borrowers => 1)
=> SUCCESS: Needed use cases so we catch any regression are found
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Nick Clemens [Fri, 4 Sep 2020 13:18:53 +0000 (13:18 +0000)]
Bug 26388: Do not show 'Renew all' or 'Renew selected' if no renewable items
Additionally, only include renewable items in 'Renew all'
To test:
1 - Check out some items to a patron, ideally:
Some not renewable because set for auto renewal
Some not renewable because of holds
Some renewable
2 - Confirm 'Renew selected' and 'Renew all' show on the opac
3 - Click 'Renew all'
4 - You get errors about the non-renewable items?
5 - Check in all renewable items
6 - Confirm you still see renew buttons
7 - Apply patch
8 - Refresh and you shoudl not see renew buttons
9 - Check out a renewable item
10 - Click 'Renew all'
11 - Renewable item is renewed with no error
12 - Try again with 'Renew selected'
13 - Confirm it works as expected
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 763cc4eb2e53f7a44a138d6162bfa4470a484bac)
Martin Renvoize [Wed, 22 Jul 2020 12:28:44 +0000 (13:28 +0100)]
Bug 26041: Enable keyboard navigation without 'ctrl'
This patch enables keyboard navigation using the arrow keys without the
need to hold the control key for the jQuery UI datepicker.
Test plan
1/ Navigate to an item in the opac and attempt to place a hold
2/ On the resultant screen, use keyboard navigation to trigger the 'Show
more options' dropdown.
3/ Focus on one of the date inputs using keyboard navigation.
4/ Use 'ctrl + arrow' keys to navigate the datepicker.
5/ Note that prior to the patch using 'bare' arrow keys does not trigger
anything
6/ Apply the patch and confirm that the datepicker can now be naviated
using the arrow keys without holding the ctrl key.
7/ Confirm that using the ctrl key combinations continue to work as
expected too.
8/ Signoff
Signed-off-by: Brandon J <brandon.jimenez@inLibro.com> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit be92f7e79ce093e251c2489408dce3077f782c0d)
Bug 17801: Use issuedate for limits in Most Circulated Items
To test:
1 - Have two checkouts in old_issues
issue 1: timestamp 2020-08-01 00:00:00, issuedate 2019-08-01 00:00:00
issue 2: timestamp 2020-07-01 00:00:00, issuedate 2019-07-01 00:00:00
2 - Perform a Most Circulated Items search for checkout dates 2020-06-01 to 2020-09-01. Both checkouts appear in search
3 - Repeat search with checkout dates 2019-06-01 to 2019-09-01. Neither checkout appears in search
4 - apply patch, restart all
5 - Repeat search with checkout dates 2020-06-01 to 2020-09-01. Neither checkout appears in search
6 - Repeat search with checkout dates 2019-06-01 to 2019-09-01. Both checkouts appears in search
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 89cc457ca25e0fbaccba28b249ceedeef6573abf)
Nick Clemens [Tue, 18 Aug 2020 13:33:33 +0000 (13:33 +0000)]
Bug 26236: Fix translating interface from DB term to readable term
When viewing the logs we try to swith the db values like 'cron' to friendly terms like
'Cron job'
The values we use for building the selectors on the page ar eupper case, but DB values are lower case
If we simply force upper case in the comparison we can ensure we always match correctly
To test:
1 - Enable some 'Logs' setting in System preferences
2 - Perform some action in koha that will log
Run a cronjob
Change a syspref
etc.
3 - Browse to Tools-> Log viewer
4 - Click 'Submit' to see all logs
5 - Note the 'Interface' column contains lower case DB values
6 - Apply patch
7 - Reload the page
8 - Values in interface are now Camel cased and more friendly
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 1733944b34499c145c2ae4c68c70efc87a5bec27)
Joonas Kylmälä [Fri, 21 Aug 2020 13:23:38 +0000 (16:23 +0300)]
Bug 26271: Add null to the list of accepted account_line data types
The database schema for accountlines table allows the
manager_id/user_id column to be NULL. If request to
/api/v1/patrons/<patron_id>/account returns such an accountline where
it is NULL we get 500 error as response. Adding NULL to allowed data
types fixes this issue.
To test:
1) Run prove t/db_dependent/api/v1/patrons_accounts.t and notice it
doesn't fail
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 089b85758614260b70f43509ccdbc6285629a883)
Katrin Fischer [Tue, 1 Sep 2020 19:22:31 +0000 (21:22 +0200)]
Bug 26313: (follow-up) Fix OPAC and "Show volumes" links
Elasticsearch requires the booleans in search requests to
be uppercase. This fixes the "Show analytics" link in
OPAC (same as first patch for intranet) and the "Show volume"
link.
To test both patches:
Set UseControlNumber = Use
1) "Show analytics"
- Turn SearchEngine to Elasticsearch and make sure it works
- Pick any serial record in your database, make sure 001 is set
- Go to new > new child record
- Fill in 245 and save
- For both staff and OPAC:
- Click on the "In" link, it should bring you to the parent record
- Click on "Show analytics", it should show your analytical record
- Switch to "Zebra" - verify links still work.
2) "Show volumes"
- Turn SearchEngine to Elasticsearch again
- Pick any serial record in your database, make sure 001 is set
- Set LDR, pos. 19 = a - Set
- Note 001 value
- Find another record and edit it
- Set LDR, pos. 19 = a or b, LDR 7 not a or b (m will work)
- Set 773$ title of set record $w 001 of set record
- For both staff and OPAC:
- Click on the "In: link, it should bring up your set record
- Click on the "Show volumes" link, it should bring up the volume
- Switch to "Zebra" - verify all links still work.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 8a37842e1af3fdc9e5e4eb2eb6ec9190ed31915e)
Nick Clemens [Tue, 1 Sep 2020 12:32:56 +0000 (12:32 +0000)]
Bug 26313: "Show analytics" link must use uppercase for booleans
In elasticsearch we only treat AND and OR as boolean operators if
they are capitalized
To test:
- Turn SearchEngine to Elasticsearch and make sure it works
- Pick any serial record in your database, make sure 001 is set
- Go to new > new child record
- Fill in 245 and save
- Click on the "In" link, it should bring you to the parent record
- Click on "Show analytics" => there will be no result
- Apply patch
- restart and reload
- Try again
- It works!
- Switch SearchEngine syspref to 'Zebra'
- Test again
- It still works!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit fde7bf5495dedf681acb3193891de44eec4d2bfa)
David Cook [Tue, 1 Sep 2020 05:19:14 +0000 (15:19 +1000)]
Bug 26331: Make svc/letters/preview executable
Without this patch, you can't preview letters when running Koha in CGI mode.
To test:
1. Run Koha as CGI (and not Plack)
2. Go to /cgi-bin/koha/tools/letter.pl?op=add_form&branchcode=&module=circulation&code=CHECKIN
3. Try to preview the notice (using a valid barcode)
4. Note in the browser console that svc/letters/preview is generating a 500 error
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit c53dfb5562a12c1a8d8b9d3d0c28cb17d001edb5)
David Cook [Thu, 3 Sep 2020 05:40:57 +0000 (05:40 +0000)]
Bug 26362: Show correct libraries in overdues report
Currently the overdues report does the following display:
Patron library = home branch
Home library = holding branch
Holding library = patron branch
This patch corrects the display of libraries in the overdues report.
To test:
0) Do not apply patch
1) Go to http://localhost:8081/cgi-bin/koha/circ/circulation.pl?borrowernumber=51
2) Go to http://localhost:8081/cgi-bin/koha/circ/set-library.pl
3) Choose "Troy"
4) http://localhost:8081/cgi-bin/koha/circ/circulation.pl?borrowernumber=51
5) Checkout "39999000004571" with due date of "09/01/2019 23:59"
Note the facts:
Patron library = Centerville
Home library = Fairview
Holding library = Troy
6) Go to http://localhost:8081/cgi-bin/koha/circ/overdue.pl
7) Change "Columns" visibility to show Holding and Home libraries
8) Note that the libraries are incorrect:
Patron library appears to be: Fairview
Home library appears to be: Troy
Holding library appears to be: Centerville
9) Apply the patch
10) koha-plack --restart kohadev
11) Go to http://localhost:8081/cgi-bin/koha/circ/overdue.pl
12) Change "Columns" visibility to show Holding and Home libraries
13) Note that the libraries are correct:
Patron library appears to be: Centerville
Home library appears to be: Fairview
Holding library appears to be: Troy
Signed-off-by: Emmi Takkinen <emmi.takkinen@outlook.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit b729886216560fdf50d88dc8214c0dbb58720b5c)
Katrin Fischer [Sat, 23 May 2020 15:19:37 +0000 (15:19 +0000)]
Bug 25448: Update German (de-DE) framework files
The updated files have been auto-generated based on the
po files and downloaded from
https://translate.koha-community.org/files/
To test:
- Make sure German language is installed, see:
https://wiki.koha-community.org/wiki/Installation_of_additional_languages_for_OPAC_and_INTRANET_staff_client
- Run the web installer and choose de-DE
- Select all sample files
- Make sure they all install without any errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit c0adeab58feaa7fb0b5c97e55b8356bb916aa163)
Mason James [Thu, 18 Jun 2020 01:26:20 +0000 (13:26 +1200)]
Bug 25792: Rename 'ttf-dejavu' package to 'fonts-dejavu' for Debian 11
to test...
1/ attempt to install koha 20.05 package on deb11, fail :'(
2/ apply patch and build new koha package
3/ attempt to install new koha package on deb11, succeed!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 14932ae7d3bf864f64bffc9b1b015a07e11c8e2e)
Jonathan Druart [Thu, 20 Aug 2020 12:32:43 +0000 (14:32 +0200)]
Bug 24147: Don't assume search_related will return ordered values
This test is failing randomly because it assume the order is always the
same. But it's not.
Note: Koha::Objects->search_related is never used , last use removed from
commit 9aa724cdf29a57bc91e42b240b5bcd19e3814ada
Bug 19599: Speed anonymise_issue_history up
We should keep it however IMO
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit e10dc503289e8d7e8c742af0111acb79d4d53111)
This patch makes the button present some space between the icon and the
text.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 2a0ccf7af26236db9a3e40968cf8f43bc308f142)
Bug 25584: Refresh checkouts table when a return claim is added
This patch triggers a checkouts table refresh when a return claim is
added. I also noticed the same when a return claim is deleted so it is
now also refreshed.
To test:
1. Set the ClaimReturnedLostValue to some valid value (2)
2. Check something out for a patron, and choose to display all checkouts
=> SUCCES: There's the checkouts table, showing the checkout
3. Click on the 'Claim returned' button and confirm
=> SUCCESS: There's no 'Claim returned' button anymore
=> ERROR: The checkout row doesn't display anything about the claim
4. Go to the 'Claims' tab, delete resolve and delete the claim
5. Go to the Checkouts tab
=> ERROR: It doesn't reflect the changes either
6. Apply this patch and start over
=> SUCCESS: Once the claim returned is added, the checkouts table is
refreshed and the information updated
=> SUCCESS: On the Claims tab, if you delete the claim and go to the
Checkouts tab, you are presented the button again.
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 7fc7427dd41ce10070a6a3d3070fb660850be511)
Jonathan Druart [Mon, 31 Aug 2020 12:26:26 +0000 (14:26 +0200)]
Bug 26324: Fix spelling resizable vs resizeable in Dopop
The correct spelling of the parameter is resizable
https://developer.mozilla.org/fr/docs/Web/API/Window/open
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit ce7f4d16d6acdc6a56d40e6ebd96d722f1c77387)
Jonathan Druart [Fri, 21 Aug 2020 14:07:46 +0000 (16:07 +0200)]
Bug 26069: Pass correct URL to twitter
We don't provide the url of the detail page so the twitter JS code
retrieve the current location, with the search terms.
Test plan:
Do a search
Click on a result
Click on the twitter button and confirm that the link only contain
biblionumber=x in the parameter
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 5fd8774c687c6aaf6716485ab9bd72a69a0e2f76)
Nick Clemens [Thu, 27 Aug 2020 16:27:09 +0000 (16:27 +0000)]
Bug 17661: (follow-up) Update regex to support Unicode characters
Rather than limiting initials to [A-Z] we should test for a broad
range of uppercase letters.
The ES/Zebra changes are slightly different because of Perl vs Java regex
conventions. POerl may support either, but I found 'Uppercase' to be a bit more explicit
More info here:
https://perldoc.perl.org/perlunicode.html
TO test:
Same plan as before but use Ж. as the ending initial
Confirm the period is preserved and other punctuation removed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 224ac84aeca3b8dba87366925d83b01e0f5c1110)
The current code for facets doesn't pull strip ending punctuation from facets
This causes duplicate facets for terms that should be combined
Sometimes series can have different punctuation depending on the field they are in
Author initials punctuation should be preserved
To test:
1 - Do search and pull up some records
2 - Edit some of the records to have authors like:
Date, C.J.
Date, C.j.
Date, C.J .
3 - Edit the records to have some series statments like:
830 $aDate, C.J. ;$v5
830 $aDate, C.J. ; $v5
830 $aDate, C.J.; $v5
4 - Add some 490s to the record with first indicator 1 and series like:
You wouldn't want to--
You wouldn't want to
You wouldn't want to..
5 - Search again and note you have 3 facets each for author and series
6 - Apply patch
7 - Repeat
8 - Now you get 2 facets for author, period not removed when following Upper case immediately, is otherwise
9 - Now you should have a single series facet
10 - Switch search engine to ES (index before applying patch)
11 - Note facets are separate again
12 - Reset mappings and reindex
perl misc/search_tools/rebuild_elasticsearch -v -r
13 - Repeat search, facets combined as above
Signed-off-by: Sarah Cornell <sbcornell@cityofportsmouth.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit e34f95a1f5eb0fce238ab442553bec5233263a9c)
Katrin Fischer [Sat, 22 Aug 2020 02:41:20 +0000 (02:41 +0000)]
Bug 25958: (QA follow-up) Add some punctuation to new DefaultLongOverdueSkipLostStatuses
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit d99651efd0a9a827b91f4575ab6f1d4344c7cfb0)
Kyle M Hall [Tue, 28 Jul 2020 11:55:18 +0000 (07:55 -0400)]
Bug 25958: Allow LongOverdue cron to exclude specified lost values
When lost items are not marked as returned, they are still subject to
the long overdue cron, so an item that has already been marked Lost may
automatically roll to Long Overdue. In some cases, a library may not
want that lost value to change. This becomes especially important with
the introduction of Claims Returned, which uses a variety of lost.
Test Plan:
1) Set up a long overdue item that would be moved to lost by longoverdue.pl
2) Run the cronjob with the new --skip-lost-value option
3) Note the item is not altered
4) Include that value in the new system preference DefaultLongOverdueSkipLostStatuses
5) Run the cronjob *without* the new option
6) Note the item is not altered
7) Run the cronjob again with the new command line option, but set it to
a different value so the item will be affected
8) Note the item is altered as it would have been before this patch was
applied
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com> Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 48edb2947163c1e9a70b11de40a71ebed747952f)
Kyle M Hall [Wed, 10 Oct 2018 15:13:37 +0000 (11:13 -0400)]
Bug 21539: addorderiso2709.pl forces librarian to select a ccode and notforloan code when using MarcItemFieldsToOrder
There is no reason that MarcItemFieldsToOrder should force librarians
to select a ccode and notforloan value for each item.
They are both optional fields.
As with location, the first value should be an empty 'none' option.
Test Plan:
1) Set up MarcItemFieldsToOrder, do *not* set mappings for ccode and notforloan
2) Add an order record to a basket that uses MarcItemFieldsToOrder
3) Note you must choose a ccode and nfl value
4) Apply this patch
5) Reload the page
6) Note you no longer have to select values for ccode and notforloan
Signed-off-by: Daniel Gaghan <daniel.gaghan@pueblolibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 0c79b7d93b96434ddf91c6ddabb1570836736a15)
Lucas Gass [Wed, 15 Jul 2020 22:28:07 +0000 (22:28 +0000)]
Bug 25791: Remove win.print()
Test plan:
1) Turn on system preference SelfCheckReceiptPrompt
2) Check out item via /cgi-bin/koha/sco/sco-main.pl
3) Click "Finish"
4) Click 'Print receipt and end session'
5) Notice two print dialog boxes right on top of each other
6) Apply patch
7) Repeat steps 1 - 4
8) Should only get a single print dialog.
9) Test in FF/Chrome and make sure behavior is consistent
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 6797f07bbdfb90c556f52bfe2f83cefdf91495f3)
Kyle M Hall [Tue, 30 Jun 2020 18:37:21 +0000 (14:37 -0400)]
Bug 25903: Sending a SIP patron information request with a summary field flag in indexes 6-9 will crash server
The 'summary' field in the patron information request specifies if detail information should be send for holds,
overdues, fines, etc. The field is 10 characters in length (0-9). However, the SIP2 spec only defines indexes 0
though 5, leave 6 though 9 undefined. Some ILSs specify behavior for these undefined indexes. Apparently the
7th field is often used to request 'Fees', as opposed to 'Fines' in some ILS. Some software that integrate via
SIP try both the 5th and 7th indexes to ensure they get all fines and fees.
The problem is that Koha's SIP server crashes if any 'summary' index beyond 5 is flagged. We should simply
ignore flags beyond 5 and act as if no flags were sent.
Test Plan:
1) Enable SIP for your instance
2) Send a patron information request with a summary flag in any index beyond 5.
i.e.: 6300120200617 124846 Y AOMIDAY|AA21030050054321
3) Note the SIP server just closes the connection without a response
4) Apply this patch
5) Restart the SIP server
6) Send the same request
7) Note you get back the patron information response!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jeff Gaines <jgaine@arlingtonva.us> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit fd4dbba7fb25bb73bcee152c84e704f9796664fd)
Kyle M Hall [Thu, 30 Jul 2020 13:35:38 +0000 (09:35 -0400)]
Bug 26076: (QA Follow up) Prevent error by using a fresh resultset
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit c9887a87538b2113c48db8cd2751a4bcf2bd2168)
Kyle M Hall [Tue, 28 Jul 2020 16:49:35 +0000 (12:49 -0400)]
Bug 26076: Sum the amount due in the database query instead of a loop in Perl
This appears to be a bug due to inaccuracies in floating point math. I've been unable to reproduce it on demand. Sometimes when using the "Write off selected" button, Koha will give the error that the payment is more than the amount owed, even though they are the same. The solution I've implemented is to move the summation from Perl code to the database query. This video demonstrates the issue and afterward, shows the error goes away after the patch is applied: https://monosnap.com/file/pG69HC7iI9mU9kkuoCtbkVzVTffKlE
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Verify that "Write off selected" functions as usual
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 64412969037ac9a9f81f05c69c3dd43bd3cab90b)
Jonathan Druart [Tue, 18 Aug 2020 08:54:43 +0000 (08:54 +0000)]
Bug 26233: (bug 25553 follow-up) Make date columns sortable on the edit items table
We were missing to pass the title-string to datatables.
Test plan:
Retest bug 26233, with appropriate dates
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit df5c9d0725dec84a3d57f97a7728cbc7e1cac9fc)
David Cook [Fri, 14 Aug 2020 01:49:40 +0000 (01:49 +0000)]
Bug 25778: Fix var scope in koha-plack for PERL5LIB and KOHA_HOME
Currently, if a koha-plack is given multiple instances, it will create
duplicate $KOHA_HOME/installer and $KOHA_HOME/installer/lib entries
in PERL5LIB as these changes are done at the global rather than local level.
This issue can only be seen in non-dev Koha, since dev Koha installs
rewrite PERL5LIB.
This patch localizes PERL5LIB to each instance.
To test dev installs:
0. cp debian/scripts/koha-plack /usr/sbin/koha-plack
1. koha-plack --restart kohadev
2. Note that nothing breaks
To test non-dev installs:
0. Don't replace /usr/sbin/koha-plack yet
1. Create multiple non-dev installs with plack enabled and running
2. Set up one of these non-dev installs so you can use the web
UI (that is beyong the scope of this test plan)
3. koha-plack --restart test1 test2 test3
4. For test3, go to /cgi-bin/koha/about.pl
5. Note that there are duplicate /usr/share/koha/installer
and /usr/share/koha/lib/installer entries in PERL5LIB
6. cp debian/scripts/koha-plack /usr/sbin/koha-plack
7. koha-plack --restart test1 test2 test3
8. For test3, go to /cgi-bin/koha/about.pl
9. Note that there are no duplicates entries in PERL5LIB
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 89721cb42b3928c745677c70fd9061273d1848dd)
Owen Leonard [Fri, 14 Aug 2020 14:18:00 +0000 (14:18 +0000)]
Bug 26213: Remove the use of jquery.checkboxes plugin when adding orders from MARC file
This patch removes the use of the jquery.checkboxes plugin from the page
for adding orders to a basket from a staged MARC file.
This patch fixes an unreported bug wherein the "select all" and "clear
all" controls affected not only MARC record checkboxes but also the
"show inactive funds" checkboxes.
To test, apply the patch and go to Acquisitions.
- Go to Vendor -> Add to basket -> From a staged file.
- Select a staged file with multiple records.
- Test the "Select all" and "Clear all" links at the top of the "Select
to import" tab. They should work correctly to select and deselect
checkboxes corresponding to staged MARC records.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 8344ee7b4ced266ac7bd48254f4695175fd8f19b)
Jonathan Druart [Tue, 16 Jun 2020 13:44:40 +0000 (15:44 +0200)]
Bug 25751: Add ORDERED in dropdown list of suggestion's statuses
The status "ORDERED" is missing from the pull down list of
status values when editing a suggestion, so the first
option is selected "No status".
This leads to data loss when editing a suggestion in the
status "ORDERED". Worse: the status can't be reset to
"ORDERED" and so no AVAILABLE notice can be sent to the patron.
Test plan:
- Create a suggestion, accept it, create a new order from this suggestion.
- Verify status is "ORDERED"
- Edit the suggestion
=> Without this patch the dropdown list does not have
"Ordered", and if you save you lost the status
=> With this patch applied the dropdown list has "Ordered"
preselected. You can save and preserve the status.
Signed-off-by: Holly Cooper <hc@interleaf.ie> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit eeb7ac6fc0d14c9e731b7759c78f37cadcfa575f)
Alex Buckley [Sun, 14 Jun 2020 22:41:03 +0000 (22:41 +0000)]
Bug 25750: fix fallback to ecost_tax_included/ecost_tax_excluded
If 'Actual cost' has not been set then it has the value of 0.00 which
Perl evaluates to true so this patchset resets it to 0, so the fallback
to ecost_tax_included/ecost_tax_excluded happens.
Test plan:
1. Add item to acquisition basket (make sure the vendor has: tax rate: 15%, 'List prices: Include tax', 'Invoice prices: Include tax')
2. Set 'Vendor price' = 10 and do not set 'Actual cost'
3. Save order
4. Observe basket.pl shows 'Total tax exc.' has a value of 0.00 and GST
column has value of -8.70
5. Jump into the database:
select tax_value_on_ordering from aqorders where
ordernumber=<ordernumber>;
[You can get the ordernumber from clicking on the 'Modify' line the item
is listed in]
6. Observe a negative value: -8.70
7. Apply patch and restart plack
8. Add a second item to the basket
9. Set 'Vendor price' = 10 and don't set 'Actual cost'
10. Save order
11. Observe basket.pl shows 'Total tax exc' has value of 8.70 and GST
has value of 1.30
12. Repeat step 5 and observe tax_value_on_ordering = 1.30
13. Run t/Prices.t unit test:
sudo koha-shell <instancename>
prove t/Prices.t
Sponsored-by: Horowhenua District Council, NZ Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 7b66b90fe707e8ac650a1c85d87560fc2f4a223d)
(cherry picked from commit 3bbf6384492834055d38ac844521be6c02d503ab)
Jonathan Druart [Mon, 3 Aug 2020 11:09:54 +0000 (13:09 +0200)]
Bug 26119: Enable patron's attribute edition when PatronSelfRegistrationVerifyByEmail
There is no good reason remove the ability to edit patron's attributes
if PatronSelfRegistrationVerifyByEmail is set.
We cannot have them in the self-registration form (because we don't
store patron's attributes during self-ref), but we can have them when
a patron show/edit their information.
Test plan:
0. Enable PatronSelfRegistrationVerifyByEmail and create patron's
attributes that can be edited at the OPAC
1. Create a new patron using the self-reg feature
=> You don't have the ability to fill in the patron's attribute
2. Edit your personal details (OPAC)
=> Without this patch you still don't see the patron's attribute that
can be edited at the OPAC
=> With this patch applied you can!
3. Notice the wording change on the "Modify patron attribute type" form
and confirm it makes sense
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit fc22fb308bdbfc6d1bda3448e966542f2828ad76)
Bug 26228: Update gulpfile to work with Node.js v12
This patch makes the gulpfile work with gulp v4 on Node v12. To test it,
make sure your dev env has Node.js v12.
It also replaces the use of 'gulp-util' (deprecated) by 'minimist' as
recommended on their site.
On both KTD and KohaDevBox edit your sources.list so the node line
points to 'node_12.x' instead of 'node_8.x'.
Once that's done:
1. On your clone run:
$ yarn install
$ npm install -E
2. Build the CSS:
$ yarn build
$ yarn build --view opac
=> SUCCESS: Things build correctly
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit a7e3c12e6175e19299e7bdbe60d1bc7d41d45ce8)
Nick Clemens [Thu, 30 Jul 2020 16:59:14 +0000 (16:59 +0000)]
Bug 26078: Prevent generating a new transfer from return policy when resolving a transfer
To test:
- Have 2+ branches
- Set your default return policy to Item returns to issuing library
- Find an item with holding branch of Branch A
- Set your library to Branch B
- Check item in
- Koha generates a transfer to Branch A. In doing so, it sets the item holding branch to Branch B
- Set your library to Branch A
- Check item in
- Koha generate a transfer to Branch B. In doing so, it sets the item holding branch to Branch A
- Set you library to Branch A
- Check the item in
. . . Repeat indefinitely.
Apply patch
Repeat
No more loop
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 47671123206a475f86de9316d8b256e14aa54bc1)
This patch does the minimum to make it usable, but it would need more
love.
Test plan:
To test you will need to try the 4 combinaisons:
item-level_itypes = item or biblio
With or without a library selected in the dropdown list
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 5bca73080f89bb2f4ca83ce6ceb9fa8e3c4a7d92)
Kyle M Hall [Wed, 17 Jun 2020 16:53:36 +0000 (12:53 -0400)]
Bug 25786: Holds Queue building may target the wrong item for item level requests that match holds queue priority
Bug 23934 removed the limitation that prevented item level holds from
getting local holds priority. The problem is the code has never checked
if the item level hold matches the given item! This means the wrong item
may be requested to fill an item level hold.
Test Plan:
1) Create 3 items on a record
2) Place a hold for the 2nd item you created
4) Ensure that hold would be picked up by local holds priority
5) Build the holds queue
6) Note the holds queue is asking for the wrong item!
7) Apply this patch
8) Rebuild the holds queue
9) Holds queue should now be asking for the correct item!
Kyle M Hall [Wed, 17 Jun 2020 15:41:21 +0000 (11:41 -0400)]
Bug 25783: Holds Queue treating item-level holds as bib-level
The holds queue builder does not honor
the new item_level_hold flag. Instead, it only item_level_request if
in the loop dealing with item level holds. This is incorrect. Item level
holds may be trapped in the local holds priority loop as well. It's
trivial to just pass though the correct item/biblio level hold flag.
I do not know how to write a reproducable test plan for these issues.
Lucas Gass [Thu, 3 Sep 2020 03:57:01 +0000 (03:57 +0000)]
Bug 26361: switch TableSettings to ColumnSettings
Test Plan:
-Be on 20.05.x
-Go to returns.tt
-See the error Uncaught SyntaxError: expected expression, got keyword 'var'.
-Apply patch
-Reload returns.tt, no error
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
(cherry picked from commit 2b6b7cb265acc77f8925eec9a9f315f249a85348)
Jonathan Druart [Tue, 7 Apr 2020 11:32:51 +0000 (13:32 +0200)]
Bug 25005: (bug 22868 follow-up) Fix suggestions pending on main page
There is a "Suggestions pending approval" link on the main page that is
displayed if there are new suggestions and the logged in user has the
permission to manage them.
On bug bug 22868 the permission changed from
acquisition.suggestions_manage to suggestions.suggestions_manage
But in the template, one occurrence has not been replaced correctly
(certainly because it was already wrong actually).
Test plan:
Create a suggestion at the OPAC
Create a patron with the suggestions permission
Use this patron to login at the staff interface
=> Without this patch the link does not appear on the main page
=> With this patch applied the link appears
Signed-off-by: David Roberts <david@koha-ptfs.co.uk> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Jonathan Druart [Fri, 21 Aug 2020 12:00:51 +0000 (14:00 +0200)]
Bug 26270: Fix ThingISBN after a change in behaviour
This is just a guess! One of our tests is failing since today and we
don't modify anything in this area.
My guess is that the service is now returning the normalized version of
the ISBN
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Nick Clemens [Tue, 4 Aug 2020 13:13:43 +0000 (13:13 +0000)]
Bug 26136: Prevent double submit on checkin-form
To test:
1 - Browse to Circulation->Check-in
2 - Type a barcode into the Check in box
3 - Hit Enter as many as times as you can
4 - Check the statistics table:
SELECT * FROM statistics WHERE itemnumber={itemnumber} AND DATE(datetime)=CURDATE();
5 - Note you have multiple lines for the same item at the same time
6 - Apply patch
7 - Reload the page
8 - Type the barcode
9 - Press Enter even more fast and more furiously
10 - Check the statistics table
11 - Only one entry, huzzah!
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 44f54aac602ae99d83d954a2f102d77ff93ecfa7)
(cherry picked from commit 9d85636bf0db1350fb4f7e83e6cca2fcc0b1038b)
Jonathan Druart [Mon, 17 Feb 2020 12:16:48 +0000 (13:16 +0100)]
Bug 24663: [19.11.x] Test OpacPublic for all OPAC scripts
Prior to this patchset there were 3 different calls to
get_template_and_user (or checkauth) with the authnotrequired param:
* authnotrequired => 0
* authnotrequired => 1
* authnotrequired => ( C4::Context->preference("OpacPublic") ? 1 : 0 )
The first one says that an unauthenticated user can access the page, the
second that the user has to be authenticated, and the last one that it
depends on the OpacPublic syspref.
Actually we must replace the first one with the third one, if the OPAC
is not public, the authentication must be forced.
To do so we are going to remove the "authnotrequired => 0" occurrences,
and check the OpacPublic syspref's value in C4::Auth
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Marcel de Rooy [Wed, 5 Aug 2020 13:48:59 +0000 (13:48 +0000)]
Bug 25360: (follow-up) Remove the https FIXME in Auth.pm
The FIXME is no longer valid since we fixed the X-Forwarded headers
for Plack. And since we do not even use using_https anymore in
the templates (see bug 21094).
Test plan:
Run Auth.t
Git grep for using_https
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
David Cook [Mon, 4 May 2020 01:12:26 +0000 (11:12 +1000)]
Bug 25360: Use secure flag for CGISESSID cookie when using HTTPS
This patch adds the secure flag to the CGISESSID cookie when using HTTPS.
This prevents the cookie being used again over a normal HTTP
request.
Bug 25360: [Follow-up] Test for "on" or "ON" value for HTTPS env var
This patch tests for HTTPS "on" or "ON" before setting the secure
cookie.
Bug 25360: [Follow-up] Fix typo in C4/InstallAuth.pm
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Amended number of tests in Context.t Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Bug 23634: (QA follow-up) Our PUT is really a PATCH
This patch makes the controller not expect that there will always be all
the email fields. So it now checks if an email field was passed, and
changed, and renders the error if that stands.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/api/v1/patrons.t
=> FAIL: Tests written by Nick highlight a problem
2. Apply this patch
3. Repeat 1
=> SUCCESS: Problems solved
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Martin Renvoize [Tue, 19 Nov 2019 14:51:50 +0000 (14:51 +0000)]
Bug 23634: Prevent non-superlibrarians from editing superlibarian emails
This patchset prevents a non-superlibrarian user from editing a
superlibrarians email address via memberentry. This is to prevent a
privilege escalation vulnerability whereby a user could update a
superlibrarians contact details to match their own and then request a
password reset via the OPAC.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Jonathan Druart [Wed, 19 Aug 2020 05:25:06 +0000 (07:25 +0200)]
Bug 26162: [19.11] Fix DT info label
There is an inconsistency in 19.11:
% grep Showing koha-tmpl/intranet-tmpl/prog/en/includes/datatables.inc koha-tmpl/intranet-tmpl/prog/js/datatables.js
koha-tmpl/intranet-tmpl/prog/en/includes/datatables.inc: var MSG_DT_INFO = _("Showing _START_ to _END_ of _TOTAL_");
koha-tmpl/intranet-tmpl/prog/js/datatables.js: "sInfo" : window.MSG_DT_INFO || "Showing _START_ to _END_ of _TOTAL_ entries",
The "entries" is not always displayed.
datatables.inc has been removed from 20.05 by
Bug 24662: Remove global variables MSG_* from datatables.inc
Nick Clemens [Fri, 17 Jul 2020 11:31:29 +0000 (11:31 +0000)]
Bug 26000: Make exception_holidays cache with branch in key
In light of 25723 offering a simpler solution here.
This would just let us avoid backporting larger changes, but this can be
marked as a duplicate if 25723 is preferred to this change
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Jonathan Druart [Wed, 29 Jul 2020 14:49:14 +0000 (16:49 +0200)]
Bug 26012: Correctly format "paid for" info on the item details view
The string is built controller side, which does not let the template
format the info nicely.
We want to display patron's info using patron-title.inc and the date
with the KohaDates plugin
Test plan:
- Make sure there is a replacement cost in the item
- check it out
- Mark it lost
- Pay the lost item fee
- Go to the detail page and look on the items tab for the item
- It will show an entry with "Paid for?" label
The patron's info and date must be correctly formatted
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit ed4fc5889467bde858cfd4ac573cd40a5b4279c5)
Jonathan Druart [Fri, 7 Aug 2020 10:44:28 +0000 (12:44 +0200)]
Bug 26165: Fix duplication of large saved reports
If the combined character length of a saved report's
title, notes and SQL is too long then pressing the
'duplicate' button will lead to an error:
"Request-URI Too Long
The requested URL's length exceeds the capacity limit
for this server."
Test plan:
1. Create a simple SQL report and add a lot of text
into the notes field (the combined URL lenth must be
>8225 characters)
2. Save the report
3. Press the duplicate the report from the saved reports page
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 81f06881a45d7647481aa8a21354a772f3daff88)
Fridolin Somers [Mon, 29 Jun 2020 13:07:10 +0000 (15:07 +0200)]
Bug 23542: Fix SRU import encoding
When importing records from a SRU server, the diacritics have bad encoding.
I reproduce with BNF server so it may be a UNIMARC issue.
Tests show that difference between Z39.50 server and SRU is that leader contains 'a' at postion 9.
Looking at MARC::Record->encoding() shows that encoding depends on leader even for UNIMARC.
So this patch adds a call to MARC::Record->encoding('UTF-8') in case of a SRU server in C4::Breeding.
Same use exists in Koha::MetadataRecord::Authority::get_from_breeding().
In case of import via Z3950, MarcToUTF8Record() is called,
which calls SetMarcUnicodeFlag(),
which calls MARC::Record->encoding('UTF-8')
Test plan :
1) Use a UNIMARC database
2) Configure a connexion to a UNIMARC SRU, for example BNF,
see https://doc.biblibre.com/koha/autour_de_koha/serveurs_z3950_sru#serveur_de_la_bnf
3) Go to cataloguing module
4) Click on 'New from Z39.50/SRU'
5) Choose only the SRU target
6) Search for ISBN 2266072889
7) Confirm you see good encoding : diacritic on 'a' of title 'Strate-a-gemmes'
8) Click on 'Marc preview'
9) Confirm you see good encoding
10) Click import
11) Confirm you see good encoding
12) Check also Authorities import via SRU
13) Check also SRU imports on a MARC21 database
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: Removed change to new_from_xml call. We should respect syntax.
But the added MARC::Record encoding does the tric! Which is implicit
for Z3950 targets where MarcToUTF8Record does the same. Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 19d9ba176dea6b7816a33b014a5f9e309af53dc0)
Nick Clemens [Fri, 26 Jun 2020 13:19:47 +0000 (13:19 +0000)]
Bug 25882: Remove phr indicator from limits when processing
We assume all limits from advanced search to be a phrase and quote them
when doing this we should remove the phrase marker to avoid doulbe quoting
To test:
1 - Have koha using ES
2 - Go to advanced search
3 - Limit by a single itemtype that exists
4 - Get some results
5 - Limit by a different itemtype that exists
6 - Get some results
7 - Limit by both itemtypes
8 - Get only the results for the second itemtype
9 - Enable DumpTemplateVarsIntranet and DumpSearchQueryTemplate
10 - Repeat search
11 - View page source and find 'search_query'
12 - See limit looks like itype:("("BK")" OR "("CR")")
13 - Apply patches
14 - Restart all the things
15 - Repeat search for both itemtypes
16 - Note results now include both types
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit a2b2426de842ac86048cbf71e3760b6483fc0b3c)
Nick Clemens [Fri, 26 Jun 2020 13:19:32 +0000 (13:19 +0000)]
Bug 25882: Unit test
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 1a2d7f1eacc0722ea0723577823ee6a477a46b0a)
David Roberts [Sun, 3 May 2020 23:48:09 +0000 (23:48 +0000)]
Bug 25336: Show checkouts/fines to guarantor is in the wrong section of the patron file
This patch moves the "Show checkouts to guarantor" and "Show fines to
guarantor" data to display under the Contact information block
To test:
1) Enable the AllowStaffToSetCheckoutsVisibilityForGuarantor and AllowStaffToSetFinesVisibilityForGuarantor system preferences to Allow
2) View a patron record.
3) The "Show checkouts to guarantor" and "Show fines to guarantor" field
will be on the right hand side of the screen under the Library use
block.
4) Apply patch
5) Check that this data has now moved to the Contact information block
on the left hand side of the patron record.
Works for me!
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 3abc4fb8584e0df2b71dd9d38f033e34b205e829)
Katrin Fischer [Sat, 18 Jul 2020 01:53:34 +0000 (01:53 +0000)]
Bug 25853: Fix file permissions for update_patrons_category script
The permissions for this were -rw-r--r-- and need to be -rwxr-xr-x.
To test:
- Verify the file permissions before and after applying the patch.
Signed-off-by: Didier Gautheron <didier.gautheron@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit e7661a37e657141b994d74398dd8e1b96d1da117)
Josef Moravec [Thu, 6 Aug 2020 19:15:44 +0000 (19:15 +0000)]
Bug 26009: (QA follow-up) It does not harm to test more
Test plan:
prove t/db_dependent/Koha/SearchEngine/Elasticsearch/QueryBuilder.t
--> should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit d08ce1d9406feca7bc7e5ab0be58efea94c7a2e5)
Nick Clemens [Fri, 17 Jul 2020 16:23:42 +0000 (16:23 +0000)]
Bug 26009: Add facet size to home/holdingbranch
To test:
0 - Set DisplayLibraryFacets to 'both' and FacetMaxCount to 20
1 - Have more than 10 branches
2 - Have items in each of those branches
3 - Enable ES, set system preference SearchEngine to Elasticsearch
4 - Search for '*'
5 - Expand homebranch/holdingbranch facets
6 - Note you only get 10
7 - Apply patch
8 - Repeat search
9 - Now you get all your facets
Signed-off-by: Michael Springer <mspringer@mylakelibrary.org> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 4dd1672c1b2f15e0b6be6071b6915c927c3a2ecc)
Nick Clemens [Tue, 4 Aug 2020 18:28:42 +0000 (18:28 +0000)]
Bug 25683: (follow-up) Use COALESCE instead of IFNULL
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit e1509855d3aa2729127ac352525be62505d752f9)
Nick Clemens [Wed, 10 Jun 2020 12:26:06 +0000 (12:26 +0000)]
Bug 25683: Fix grouping of results
DBIX doesn't seem to work as I expected - if trying to group by we can only
get the columns we grouped by, otherwise the queries are much more complicated
and come out wrong
This patch removes the 'amountoutstanding' from the query. Note that we do return patron
object, however, to access all the columns we must discard_changes (or refetch)
Also fixes a typo 'verbosse'
To test:
1 - charge a $1 fine to a patron
2 - pay off the fine
3 - perl misc/cronjobs/update_patrons_category.pl -f J -t J -fu=5 -v
4 - Note the patron is returned twice
5 - export DBIC_TRACE=1
6 - repeat 3 - view the SQL query and see how odd it is
7 - Apply this patch
8 - repeat 3 - simpler query
9 - patron returned only once
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit c7ae33f60c18d2874370e7c2d2f3042fe1331e0e)
Nick Clemens [Tue, 9 Jun 2020 10:52:26 +0000 (10:52 +0000)]
Bug 25683: Patron with no accountlines should have 0 outstanding (not NULL)
Test plan:
- Have a patron with nothing in accountlines
- run update_patron_categories to find patrons with fines under $5 (-fu=5)
- Your patron is not found
- Give your patron a manual charge of $1
- rerun the cron, your patron is found
- pay off your patron's fine, putting their balance at $0
- rerun the cron, your patron is found
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 09146f4a995d50206c7f1c2d80e797b3cb1175c5)
Jonathan Druart [Thu, 30 Jul 2020 08:51:26 +0000 (10:51 +0200)]
Bug 26098: Fix JS error on the fund list view when no fund displayed
TypeError: this.data(...) is undefined
in jquery.treetable.js
Test plan:
Go to the fund list view
Select a filter that will return no result
=> With this patch applied there is no JS error in the console
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit b6cb3c2ba54c0e10c27f37a0d2dec4f2875f2ddd)
Nick Clemens [Mon, 29 Jun 2020 18:15:39 +0000 (18:15 +0000)]
Bug 25893: Use wildcards when searching logs
The restores the wildcards that were used in the past
To test:
0 - Ensure cataloguing logs and issues logs are enabled
1 - Edit an item
2 - Circulate that same item
3 - Browse to tools-> log viewer
4 - Put the itemnumber in the 'info' box
5 - You see only the circulation
6 - Put the itemnumber in the object box
7 - You see only the cataloging modification
8 - Apply patch
9 - Put itemnumber in info box
10 - you see both actions
11 - Put the itemnumber in the object box
12 - You see only the catalogiong modification
Signed-off-by: Jason Robb <jrobb@sekls.org>
Bug 25893: Don't wildcard object
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 25893: (follow-up) Undo unrelated changes
Jonathan Druart [Mon, 10 Aug 2020 09:59:58 +0000 (11:59 +0200)]
Bug 26162: Wait for the table to be refreshed
The previous patch did not work as expected. We still got a
StaleElementReference exception.
But this time on
10:43:47 selenium_1 | Caused by: org.openqa.selenium.NoSuchElementException: Unable to locate element: {"method":"xpath","selector":"//*[@id=\"branchname\"]"}
Because we found the one that existed on the page, not the one sent back
in AJAX.
The idea of this patch is to search for the "Showing 1 to X of Y entries" info and wait for X == Y
Jonathan Druart [Thu, 6 Aug 2020 13:08:48 +0000 (15:08 +0200)]
Bug 26162: Make Selenium click action more robust
See
https://stackoverflow.com/questions/12967541/how-to-avoid-staleelementreferenceexception-in-selenium
https://www.selenium.dev/exceptions/
https://developer.mozilla.org/en-US/docs/Web/WebDriver/Errors/StaleElementReference
This patch will fix the following failure we get under D11:
18:47:07 selenium_1 | 09:47:07.478 WARN - Exception: Element not found in the cache - perhaps the page has changed since it was looked up
18:47:07 selenium_1 | For documentation on this error, please visit: http://seleniumhq.org/exceptions/stale_element_reference.html
18:47:07 selenium_1 | Build info: version: '2.53.1', revision: 'a36b8b1', time: '2016-06-30 17:37:03'
18:47:07 selenium_1 | System info: host: '78b9a07f51f2', ip: '192.168.16.2', os.name: 'Linux', os.arch: 'amd64', os.version: '4.19.0-9-amd64', java.version: '1.8.0_91'
18:47:07 selenium_1 | Driver info: driver.version: unknown
18:47:07 koha_1 |
18:47:07 koha_1 | STRACE: /usr/share/perl5/Try/Tiny.pm:123 in Selenium::Remote::Driver::catch {...}
18:47:07 koha_1 | /usr/local/share/perl/5.26.1/Selenium/Remote/Driver.pm:353 in Try::Tiny::try
18:47:07 koha_1 | (eval 1571):1 in Selenium::Remote::Driver::__ANON__
18:47:07 koha_1 | (eval 1573):2 in Selenium::Remote::Driver::__ANON__
18:47:07 koha_1 | (eval 1546):17 in Selenium::Remote::Driver::_execute_command
18:47:07 koha_1 | /usr/local/share/perl/5.26.1/Selenium/Remote/WebElement.pm:63 in Selenium::Remote::WebElement::_execute_command
18:47:07 koha_1 | /kohadevbox/koha/t/lib/Selenium.pm:184 in Selenium::Remote::WebElement::click
18:47:07 koha_1 | /kohadevbox/koha/t/lib/Selenium.pm:172 in t::lib::Selenium::click_when_visible
18:47:07 koha_1 | t/db_dependent/selenium/administration_tasks.t:131 in t::lib::Selenium::click
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit a96433446e87c03ac6e253a54eb067ac93a33575)
This patch introduces handling for per_page=-1 and actually adds a
missing feature to the API: being able to request all resources on a
route.
To test this:
1. Visit the libraries admin page
2. On the table, choose to display 'All' rows
=> FAIL: it doesn't refresh, the browser console displays a 500 error
code and so the logs
3. Apply the tests patches
4. Run:
$ kshell
k$ prove t/Koha/REST/Plugin/Pagination.t \
t/db_dependent/Koha/REST/Plugin/Objects.t
=> FAIL: Tests fail loudly
5. Apply this patch
6. Restart plack
7. Repeat 2
=> SUCCESS: choosing to display all, works
8. Repeat 4
=> SUCCESS: Tests pass now!
9. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit e4cae99f7ec76e40a57e4066e088b9b01caed744)
This patch introduces tests for the per_page=-1 handling use case. From
now on per_page=-1 means 'all resources'.
On writing this I noticed that we always paginate results no matter
what, but there was a weird condition under which on pagination headers
were sent back to the API consumer. This is highlighted in the precedent
patch, which is not the -1 situation this one tries to tackle.
Both pagination and searching are broken with per_page=-1, which is a
standard, and we actually didn't explicitly set a way to request all
resources.
To verify this:
1. Apply the previous tests patch and this one
2. Run:
$ kshell
k$ prove t/Koha/REST/Plugin/Pagination.t \
t/db_dependent/Koha/REST/Plugin/Objects.t
=> FAIL: Things are damn broken
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit d20bc39d759bc9321b1b7accb952f90351a14caa)
projects / koha.git / log