Marcel de Rooy [Wed, 8 Mar 2017 13:19:34 +0000 (14:19 +0100)]
Bug 18228: DBIx schema changes for Virtualshelve.pm
No test plan.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Wed, 8 Mar 2017 13:10:32 +0000 (14:10 +0100)]
Bug 18228: Table revision of virtualshelves
In order to make the permissions easier, we will replace the columns
allow_add, allow_delete_own and allow_delete_other by two new columns
allow_change_from_owner and allow_change_from_others.
The distinction between adding or deleting an entry is no longer made.
If you have change permission, you can do both. Also deleting an entry
does no longer depend on who added the entry.
Formerly, the owner could always add entries. It is now possible to
make a list readonly.
We will not use the combination of owner=no and other=yes. This will
leave us three possibilities:
[1] owner=no, other=no: The list is read-only. No one can change
contents of the list. Naturally, the owner can edit permissions.
[2] owner=yes, other=no: Only the owner can change contents.
[3] owner=yes, other=yes: Anyone seeing the list can change contents.
This especially applies to shared lists and public lists.
The two database columns will be presented in the interface as one
permission field offering the three abovementioned options.
Test plan:
[1] Run the db rev.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Thu, 22 Jun 2017 06:55:16 +0000 (08:55 +0200)]
Bug 18214: Add check for shared or public list
Following the idea behind bug 10865, we are only showing the permissions
when the list is shared or public.
Adding a simple test in opac-shelves here.
Note 1: Since the owner can always add or delete entries, the permissions
will not be relevant anymore for a strictly private list.
Note 2: Staff view always shows the permissions. This could have been
changed here too, but that change is far less urgent (bug 10865 did not
touch staff view and bug 18228 will rearrange permissions anyway).
Test plan:
[1] Verify on OPAC that you see the permissions for a private list with
shares or a public list. And you do not see them for a private list
without shares.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Marcel de Rooy [Mon, 6 Mar 2017 08:44:48 +0000 (09:44 +0100)]
Bug 18214: Cannot edit list permissions of a private list
If you have disabled the pref OpacAllowPublicListCreation, your users are
not able to edit the list permissions for private/shared lists.
For a private list they may only be theoretically relevant, but for a shared
list they are relevant.
Since we do not always know the history of a list (has it been public or
shared, does it contains entries from other users) and therefore permissions
are even relevant for a currently private list, we should just allow editing
these permissions.
Test plan:
[1] Do not yet apply this patch.
[2] Disable OpacAllowPublicListCreation.
[3] Create a private list in OPAC. Edit the list. Verify that you do not
see the permission combo boxes.
[4] Apply this patch. Edit the list again. Do they appear now?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised.
Jonathan Druart [Wed, 21 Jun 2017 17:14:09 +0000 (14:14 -0300)]
Bug 18651: Do no LOCK/UNLOCK the table
We cannot LOCK the old_issues table here, other tables are accessed and DBIx::Class rename it with "me":
DBD::mysql::st execute failed: Table 'me' was not locked with LOCK
TABLES [for Statement "SELECT `me`.`issue_id`, `me`.`borrowernumber`,
`me`.`itemnumber`, `me`.`date_due`, `me`.`branchcode`,
`me`.`returndate`, `me`.`lastreneweddate`, `me`.`renewals`,
`me`.`auto_renew`, `me`.`auto_renew_error`, `me`.`timestamp`,
`me`.`issuedate`, `me`.`onsite_checkout`, `me`.`note`, `me`.`notedate`
FROM `old_issues` `me` WHERE ( `me`.`issue_id` = ? )" with ParamValues:
0='2'] at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1832.
Consequence: We could have a checkin refused if there is a race, but
this is the simplest and safest way to fix it.
Marc Véron [Wed, 14 Jun 2017 09:10:56 +0000 (11:10 +0200)]
Bug 18800: Patron card images: Add some more explanation to upload page and fix small translatabiity issue
The file
koha-tmpl/intranet-tmpl/prog/en/modules/help/patroncards/image-manage.tt
has a small translatability issue (sentence splitting by html tags).
This patch fixes it and adds a little bit more explanation about
uploading, using and replacing such images.
To test:
- Verify that text changes make sense
- Apply patch
- Go to Home > Tools > Patron card creator > Images and verify
that the page displays properly
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Fri, 26 May 2017 19:08:27 +0000 (21:08 +0200)]
Bug 18684 - Get rid of %%] in translation for currency.tt
File add koha-tmpl/intranet-tmpl/prog/en/modules/admin/currency.tt exposes
parts of template directives due to html tags inide directives. Fix it using
the HtmlTags filter.
To verify:
- Create a translation for a language 'aa-AA
- po file aa-AA-staff-prog.po / translate.koha-community.org for 17.05 contains a line
'%%]'%sCurrencies %s
To test:
- Apply patch on top of Bug 18665
- Recreate translation
- Verify that line above is gone
- Verify that in staff client currencies administration wors as before
Followed test plan and it worked as intended Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 18684: (followup) Move 2 closing h3 tags to end of previous lines
See comment #4
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Thu, 25 May 2017 19:52:09 +0000 (21:52 +0200)]
Bug 18665: Add test for HtmlTags.pm
This patch adds tests for the tt filter HtmlTags.pm
To test: prove -v t/HtmlTags.t should pass
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Wed, 24 May 2017 14:06:31 +0000 (16:06 +0200)]
Bug 18665 - Translatability: Add tt filter to allow html tags inside tt directives
HTML tags inside template toolkit directives are not allowed because of translation issues.
Add a filter that handles HTML tags.
Note you need to write quotes ' around the text you want displayed as a
heading
To test:
- Apply patch
- Add [% USE HtmlTags %] to the top of a tt file
- Add something like [% 'My nice title' | $HtmlTags tag="h1" %] to the tt file
- Verify that in output 'My nice title' has h1 tags
- Change template directive to something like
[% 'My nice title' | $HtmlTags tag="h1" attributes='title="This is a nice title attribute"' %]
- Verify that title attribute displays in output (source code or tooltip on 'My nice title')
Notes: - Tests are planned for a second patch
- Update for Wiki coding guidelines
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 21 Jun 2017 14:05:59 +0000 (11:05 -0300)]
Bug 18651: Fix tests if no circ rule exist
The following test is failing on Jenkins:
# Subtest: Handle ids duplication
1..4
ok 1 - No account lines should exist on old issue_id
not ok 2 - Two account lines should exist on new issue_id
ok 3 - AddReturn should return the issue with the new issue_id
ok 4 - If an item is checked-in, it should be moved to old_issues even if the issue_id already existed in the table
not ok 4 - Handle ids duplication
When no circ rule exist
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Tue, 20 Jun 2017 13:03:35 +0000 (15:03 +0200)]
Bug 18651: [QA Follow-up] Fix the MAX(issue_id) calculation
Found this by inserting the same issue_id in old_issues before checkin:
The call to ->search( )->get_column is in scalar context and will
return the number of results, i.e. always 1.
If you have an issue_id 2 in old_issues, it will crash:
DBIx::Class::Storage::DBI::_dbh_execute(): Duplicate entry '2' for key 'PRIMARY'
The fix is fairly simple: Put get_column in list context and pick the first
array entry.
NOTE: Using DBIx's get_column()->max here might look simpler here.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Jonathan Druart [Mon, 22 May 2017 17:30:48 +0000 (14:30 -0300)]
Bug 18651: Update accountlines.issue_id is the issue_id has been changed during the move
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Jonathan Druart [Mon, 22 May 2017 17:26:25 +0000 (14:26 -0300)]
Bug 18651: Do not charge if the checkin failed
2. If the move fails for whatever reason (see
https://lists.katipo.co.nz/pipermail/koha/2017-May/048045.html for an
example), fines can be charged. It should not
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Jonathan Druart [Mon, 22 May 2017 15:02:20 +0000 (12:02 -0300)]
Bug 18651: Update issue_id in AddReturn
1. AddReturn returns a $issue hashref with the old issue_id value
=> At first glance it does not affect anything, but would be good to fix
it for future uses.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Owen Leonard [Thu, 11 May 2017 16:45:42 +0000 (16:45 +0000)]
Bug 18582 - Hide empty rows in detailed suggestion view
This patch adds a check for the existence of various template variables
before showing the row containing that data. This will prevent the
display of rows containing labels but no data in the suggestions
detailed view.
To test, apply the patch and go to Acquisitions -> Suggestions.
View the detail page of various suggestions and confirm that only fields
with data are displaying.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Wed, 31 May 2017 14:19:35 +0000 (16:19 +0200)]
Bug 18697: Final polishing
GetFictiveIssueNumber:
Returns undef instead of 0 for irregular frequencies. Also added to POD.
Removed unused variable $wkno.
Adding a return makes the if(unit) unneeded.
Replaced (a+b)/b by 1+a/b.
_delta_units:
Added a comment about its parameters.
GetFictiveIssueNumber.t:
Adjusted the tests for irregular frequencies accordingly.
Test plan:
[1] Run t/db_dependent/Serials/GetFictiveIssueNumber.t
[2] Run t/db_dependent/Serials/GetNextDate.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Wed, 31 May 2017 13:20:40 +0000 (15:20 +0200)]
Bug 18697: Adjusting unit tests for dayly serial frequencies
No changes were needed for GetNextDate.t.
In GetFictiveIssueNumber.t we add a subtest for daily frequencies.
Test plan:
[1] Run t/db_dependent/Serials/GetFictiveIssueNumber.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Tue, 30 May 2017 14:44:46 +0000 (16:44 +0200)]
Bug 18697: Fix date calculation for dayly frequencies in Serials
The changes in _get_next_date_day are actually only cosmetic. The sub
now reads exactly the same as its counterparts for other units, but
the results are exactly the same as before.
In GetFictiveIssueNumber we now call _delta_units for each type of unit.
The two Delta_Days calls are moved to _delta_units. Note that this also
is a cosmetic change; results should be exactly the same.
Test plan:
[1] Edit a subscription. Test predication pattern for some daily freq.
[2] Run t/db_dependent/GetNextDate.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Tue, 30 May 2017 13:56:22 +0000 (15:56 +0200)]
Bug 18697: Adjusting unit tests for weekly serial frequencies
Corrections and added unit tests following the changes of the first patch.
GetFictiveIssueNumber.t: New subtest for weekly frequencies.
GetNextDate.t: Correcting a few dates one day. If we use 2/week, we will
calculate an interval of 3 days and correct with 4 days at the end of
the cycle. The connection with firstacqui is not relevant anymore.
Test plan:
[1] Run t/db_dependent/Serials/GetFictiveIssueNumber.t
[2] Run t/db_dependent/Serials/GetNextDate.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Tue, 30 May 2017 13:01:52 +0000 (15:01 +0200)]
Bug 18697: Fix date calculations for weekly frequencies in Serials
Same solution applied as in bug 18356/18607. Consistency++
The code in _get_next_date_week is again very similar to the code in
_get_next_date_month or _get_next_date_year. I will not merge them here,
but we could consider that in the future.
Code in GetFictiveIssueNo has been adjusted similarly to month and year.
Test plan:
[1] Do not apply this patch. Create a subscription for 3/week.
When the first issue date is on a Saturday or Sunday, the
intervals in the prediction pattern are 0,0,7,0,0,7,etc.
Starting on Wed-Fri 1,1,5,etc. Starting on Mon-Tue 2,2,3,etc.
[2] Apply this patch. Check again.
The interval should be always 2,2,3 now and no longer depend on the
day_of_week of first issue date.
[3] Check another weekly frequency with multiple units per issue.
Say 1 issue/3 weeks.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Mon, 29 May 2017 10:08:40 +0000 (12:08 +0200)]
Bug 18607: Adjusting unit tests for monthly serial frequencies
The changes in the first patch require some corrections as well as
additional test cases.
GetNextDate.t: Since the calculation for multiple issues per unit has
slightly changed, a few dates (day 15 or day 16) have been changed in the
unit test; when we use 2/month, the algorithm now always adds 15 days.
Added a few test descriptions in this regard too.
GetFictiveIssueNumber.t: Add the monthly subtest with two test cases. In
the first case we tests multiple units per issue, and in the second case
we test multiple issues per unit (month).
Test plan:
[1] Run t/db_dependent/Serials/GetFictiveIssueNumber.t
[2] Run t/db_dependent/Serials/GetNextDate.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Tue, 16 May 2017 12:46:55 +0000 (14:46 +0200)]
Bug 18607: Fix date calculations for monthly frequencies in Serials
Similarly to the solution of bug 18356, this patch fixes the date
calculation for monthly frequencies.
The calculation in GetFictiveIssueNumber now makes use of the new
_delta_units sub introduced on bug 18356.
The calculation in _get_next_date_month is also very similar to the one
in _get_next_date_year. I do not merge them here, but this could still
be considered later on. At least consistency is achieved now between
both routines. The connection with firstacquidate has been cut thru
just like for year units.
Test plan:
[1] Without this patch, look at the prediction pattern for a
subscription with first issue on Feb 21 and 5 per month. The first
issues will be 21, 22, 23, 24, 25. Then jumping to 21, 23, 25, etc.
[2] Apply the patch. Look at the same prediction pattern. You will now
see 6 day intervals and a new cycle starting on the 21st.
So Feb 21, 27, Mar 5, 11, 17 and Mar 21, 27, etc.
[3] Edit an subscription. Try a few other monthly frequencies.
[4] The next patch adjusts related unit tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Tue, 9 May 2017 15:01:46 +0000 (17:01 +0200)]
Bug 18356: Fix date calculations for yearly frequencies in Serials
The problem as described on BZ 18356 is a combination of an error in
GetFictiveIssueNumber and GetNextDate for unit==year.
[1] In GetNextDate the Add_Delta_YM calculation should be applied only to
frequencies based on years per unit.
In the case of multiple units per year we calculate the number of days to
add. And if we have reached the end of a cycle, we correct the
rounding applied in the cycle.
NOTE 1: We obsolete the idea here of rebasing dates on firstacqui. In case
of manual adjustments, we probably do not want it. And otherwise we do not
need it anymore due to the correction at the end of a cycle.
NOTE 2: The calls to Add_Delta_YM are intentionally not corrected for leap
years. Say you start at 2016-02-29. If you use 1/yr or 1/2yr, you will
switch to the Feb 28th in the following years. In 2020 there will be no
switch to Feb 29 again; if someone should need it, please use a manual
adjustment. This is probably highly exceptional.
[2] In GetFictiveIssueNumber the year should be decreased by one if you
have more units per year and you did not yet reach firstacqui day and
month. This affects calculations in GetNextDate with irregularities.
NOTE 1: I added a wrapper around Date::Calc::N_Delta_YMD in order to improve
its results; this will especially be needed when we use it later for
month units.
NOTE 2: In case of manual adjustments this calculation does not really make
sense. Another report should deal with improving irregularities.
Test plan:
[1] Verify that both GetNextDate.t as well as GetFictiveIssueNumber.t pass.
[2] Look at the prediction pattern for a few frequencies.
For example: 1 iss/y, 1 iss/2y, 5 iss/y.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch deals with tests for yearly frequencies.
Adjust/extend GetNextDate.t:
[1] Adjust mixup of units/issues in a description.
[2] Add testing +2 years on 29-2 of leap year for freq 1 issue/2 years.
[3] Add tests for freq 9 issues/year.
Add GetFictiveIssueNumber.t:
[1] Two subtests are provided for irregular frequencies (very trivial) and
for year frequencies (with four specific test cases).
Test plan:
[1] Run t/db_dependent/Serials/GetNextDate.t
[2] Run t/db_dependent/Serials/GetFictiveIssueNumber.t
Note: Without the second patch both tests should fail. This shows the need
of the adjustments in the second patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Thu, 15 Jun 2017 22:07:53 +0000 (18:07 -0400)]
Bug 18807: t/db_dependent/www/batch.t fails
get() does not take two parameters. fixed.
prove and run koha qa test tools
Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 14 Jun 2017 19:56:13 +0000 (16:56 -0300)]
Bug 18807: Fix tests www/batch.t
Several things are wrong here:
1. It assumes that import_record_id is the biblionumber
=> Wrong, it is only true when the DB is empty and that the 2 AI equal 1
2. The encoding in the template is 'UTF-8', not 'utf8', it leaded to
"stage-marc-import.pl: marc21record.mrc: Unexpected charset UTF-8, expecting utf8"
3. We did not test that the biblio was correctly imported
Test plan:
Make sure the tests now pass.
For the www tests you need to set the following env vars:
KOHA_USER, KOHA_PASS, KOHA_INTRANET_URL and KOHA_OPAC_URL
Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 14 Jun 2017 18:53:18 +0000 (15:53 -0300)]
Bug 18806: Fix batch revert
Since bug 18242: When a biblio is deleted, a new transaction is created.
tools/manage-marc-import.pl use the AutoCommit flag, which does not
allow nested transaction.
AutoCommit must not be used.
Test plan:
Import a batch, then revert it.
The biblios must have been correctly deleted, they were not before this
patch
Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
- Review code, verify that line breaks are removed
- Run QA tools
- Bonus test: Create a "language" aa-AA and verify that no fragments
containign %%] are picked for the 6 files
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Translators should not be confronted with such code internals.
To test:
- Review code change (it removes line breaks)
- Bonus test: Create a new translatin for "language" aa-AA and
verify that the line no longer appears in aa-AA-staff-prog.po
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Wed, 14 Jun 2017 16:08:43 +0000 (13:08 -0300)]
Bug 18804: (bug 13501 follow-up) Fix add item form (select2)
Hard to say here, select2 adds so many elements that we need to ignore.
Here we just assume that input text with an id starting with
tag_952_subfield must be filled
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
With bug 11088 and bug 16400 the submit node switched from:
<input type="submit" name="save" onclick="return check_form_borrowers();" value="Save" />
to:
<button type="submit" name="save" onclick="return check_form_borrowers">
then finally to:
<button class="btn btn-small" id="saverecord" type="submit" name="save" onclick="return check_form_borrowers();">
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 16286 replaced the submit node:
<input type="button" value="Save" onclick="Check(this.form);" />
with
<input type="submit" value="Save" />
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Jonathan Druart [Tue, 13 Jun 2017 20:43:39 +0000 (17:43 -0300)]
Bug 18804: Skip selenium tests if Selenium::Remote::Driver is not installed
We do not want these tests to fail if the module is not installed.
This module is not in the dependencies of Koha and it is good as it.
A developper who wants to use it will know what to do.
It is part of RM duties to make sure these tests pass
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Marcel de Rooy [Fri, 16 Jun 2017 05:57:14 +0000 (07:57 +0200)]
Bug 18361: [QA Follow-up] Resolve warning on undef values supplied
The following warning was raised in Letters.t:
DBIx::Class::ResultSource::_minimal_valueset_satisfying_constraint():
NULL/undef values supplied for requested unique constraint 'primary' (NULL
values in column(s): 'id'). This is almost certainly not what you wanted,
though you can set DBIC_NULLABLE_KEY_NOWARN to disable this warning.
This warning is triggered by this line in C4/Letters.pm:
Koha::SMS::Providers->find( $member->{'sms_provider_id'} );
As you already guessed, the sms_provider_id returns undef.
Resolved in sub find by testing if there are parameters and if so, they
should not be all undefined. (In most cases there will be only one
parameter; but this report is about composite keys.)
Added a trivial test case in Objects.t too.
Test plan:
Run t/db_dependent/Koha/Object.t
Run t/db_dependent/Koha/Objects.t
Run t/db_dependent/Letters.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 18361: Additional tests for Koha::Objects->find
Adding a subtest find in t/db_dependent/Koha/Objects.t.
Test plan:
Run t/db_dependent/Koha/Objects.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Fri, 31 Mar 2017 11:52:15 +0000 (13:52 +0200)]
Bug 18361: Koha::Objects->find should accept composite primary keys
Changes the $id parameter to an array. (IssuingRule has three keys.)
The build_object method in TestBuilder.pm has been adjusted to pass
multiple primary key values to find.
Also adjusted the POD section to show more clearly that we accept
the same parameters as DBIx ResultSet does.
Test plan:
Run t/db_dependent/Koha/Object.t
Run t/db_dependent/Koha/Objects.t
Run t/db_dependent/TestBuilder.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 18 Apr 2017 16:49:18 +0000 (13:49 -0300)]
Bug 18539: Forbid list context calls for Koha::Objects->find
Reading https://perlmaven.com/how-to-return-undef-from-a-function
this sound like the more correct behaviour.
Considering:
$template->param(
stuff => Koha::Stuffs->find( $id ),
foo => 1,
);
without this patch, if the $id does not represent any rows in the DB,
stuff will be assigned to 'foo' and $foo will be undef in the template.
That can lead to very bad side-effects.
With this patch we make sure that it will never happen again.
Test plan:
prove t/db_dependent/Koha/Objects.t
should return green
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 27 Feb 2017 08:59:53 +0000 (08:59 +0000)]
Bug 17975: Let C4::Letters manage today param substitution
The today parameter is properly handled from C4::Letters subroutines, we
do not need to pass it from callers.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 16 Jan 2017 16:33:39 +0000 (17:33 +0100)]
Bug 17975: TT syntax for notices - Prove that HOLD_SLIP is compatible
Here we need to test <<today>>.
We already pass a value, but it was wrong. We must pass a string, not a
DateTime object, otherwise the KohaDates plugin will not display the
hours part if we need it.
Test plan:
Define a HOLD_SLIP notice template to match your need.
Do not forget to use
[% today | $KohaDates %]
or
[% today | $KohaDates with_hours => 1 %]
To access data from the reserves table, use the 'hold' variable
Tested both patches together with several date formats, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 16 Jan 2017 15:58:23 +0000 (16:58 +0100)]
Bug 17965: TT syntax for notices - Prove that DUEDGST is compatible
This notice template have the particular feature of using <<count>>.
This value is substitued during the process of the notice template.
For the TT syntax, all what we need is to send the values to substitute to the
template.
Note that items.content can also be used in these template, you can have
a look at bug 17967 to see a better alternative to this marker.
Test plan:
Generate DUEDGST and DUE notice messages.
You should be able to generate the same messages with the TT syntax.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 13 Mar 2017 01:56:19 +0000 (22:56 -0300)]
Bug 18254: Remove call to GetItemsByBiblioitemnumber call from additem.pl
The code from additem to delete all the items of a bibliographic record
is very ackward.
This patch simplifies the algorithm and make the code more readable.
Test plan:
Remove all the items of a bibliographic records
If at least 1 item is checked out you should get an error.
No change with the current behavior is expected.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Thu, 18 May 2017 18:02:33 +0000 (20:02 +0200)]
Bug 18630: Translatability (Clubs): 'Cancel' is ambiguous and leads to mistakes
The button to cancel a club enrollement is labelled with 'Cancel'. That is ambiguous and translates e.g. in German to 'Abbrechen' which can lead to
mistakes.
To test:
- Apply patch
- Enroll a patron to a club
- Enable public enrollment in OPAC
- Verify that the button to cancel enrollment in both OPAC and staff client
reads 'Cancel enrollement' (instead of 'Cancel' without patch)
(The button appears on the patron's detail pages in OPAC and staff client)
Amended for comment #4 / mv
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
David Cook [Wed, 11 Jan 2017 04:36:05 +0000 (15:36 +1100)]
Bug 17710 - C4::Matcher::get_matches and C4::ImportBatch::GetBestRecordMatch should use same logic
C4::ImportBatch::GetBestRecordMatch uses SQL to sort by score descending
then candidate_match_id descending. With C4::Matcher::get_matches, I
implement the same sort but use Perl code to do it, since we're sorting
search results.
It's a simple change, but it's in a big block of code, so I don't have
unit tests.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Mon, 5 Jun 2017 22:18:07 +0000 (18:18 -0400)]
Bug 18732: Noisy t/SMS.t triggered by koha_conf.xml without sms_send_config
Upgraded systems may be lacking sms_send_config which makes t/SMS.t noisy.
This silently bypasses the problem.
Remove sms_send_config from your koha-conf.xml file
prove t/SMS.t
-- it will be noisy, but pass.
apply patch
prove t/SMS.t
-- noise gone.
run koha qa test tools.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Works correctly as indicated by the testing plan.
No "uninitialized" noise after patch is applied.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Slightly amended: turned the iif around.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Sun, 4 Jun 2017 17:55:08 +0000 (19:55 +0200)]
Bug 11235: Names for reports and dictionary are cut off when quotes are used
To reproduce for saved reports:
- Go to Home > Reports > Guided reports wizard
- Create a report with double quotes in it's name, e.g. 'My "double quoted" report'
- Go to "Saved reports", locate in the list the new report (name is correct here,
is correct in database as well)
- From the selection button at the right choose "Edit"
- Result: Content of edit field for the report name is truncated (displays only: 'My')
To reproduce for Reports dictionary:
- Go to Home > Reports > Guided reports wizard
- Create a new definition, give it the name 'The "double quoted" definition' and enter
a text with double quotes for "Description"
- Save
- Verify that in the list of definitions both name and descriptions are truncated
(in database as well)
To test:
- Apply patch
- Verify that issues described above can no longer be reproduced
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Julian Maurice [Wed, 12 Oct 2016 10:38:16 +0000 (12:38 +0200)]
Bug 13452: Fix for plack
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Julian Maurice [Fri, 2 Oct 2015 09:31:10 +0000 (11:31 +0200)]
Bug 13452: Fix obvious issues in issues_avg_stats.pl
- Remove joins with issuingrules which are not needed
- Fix the SQL query so that $weight is now the value of COUNT(*) instead
of a timestamp
- QA fix: '$column eq $itype' instead of '$column =~ $itype' (same for
$line)
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Katrin Fischer [Mon, 8 Jun 2015 23:04:07 +0000 (01:04 +0200)]
Bug 13452: 'Average loan time' report to obey item-level_itypes preference
Fixes the 'Average loan time' report so that the system
preference setting item-level_itypes is taken into account.
Before the patch, the report was always using the biblio
level itemtype. With the patch, it will depend on the pref
setting.
To test:
- Run various reports, compare results with both
possible pref settings
- Try limiting your search in various ways, especially
on a specific itemtype
- Make sure you switch checkboxes in testing,
using itemtype as the row or as the column
Notes:
- Filtering on a specific itemtype on master was not working
if the itemtype was chosen as column. The patch should fix that.
- Fixes headings and breadcrumbs so that the name of the report
is the same as on the reports start page
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Thu, 8 Jun 2017 15:19:22 +0000 (15:19 +0000)]
Bug 18752 - Automatic item modifications by age should allow 'blank' values
This patch modifies the automatic item modification by age template to
correct errors in form validation:
- Age in days should not be required
- A value should not be required in substitutions.
To test, apply the patch and clear your browser cache if necessary.
- Go to Tools -> Automatic item modification by age.
- Confirm that when editing or creating a rule the only required field
is the substitutions field name.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Mon, 15 May 2017 07:58:04 +0000 (09:58 +0200)]
Bug 18601: OAI/Sets.t mangles data due to truncate in ModOAISetsBiblios
This patch replaces the TRUNCATE statement in ModOAISetsBiblios by a
DELETE statement. A truncate will cause an implicit commit and will
therefore commit the transaction started in the test script.
Also simplifying the module load in the test script.
Test plan:
Do not apply this patch and observe that biblio records are added to your
database by running t/db_dependent/OAI/Sets.t.
Apply this patch, run the test again and verify that it does no longer
add records to your biblio table.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Lee Jamison [Wed, 7 Jun 2017 11:34:29 +0000 (11:34 +0000)]
Bug 18749 - xt/sample_notices.t fails
Bug Description:
When performing a unit test on xt/sample_notices.t with the command
'prove xt/sample_notices.t' 11 tests fail with the error message
"No sample notice to delete".
Cause of bug:
The failures are caused by an incorrect file path on Line 25 of
xt/sample_notices.t.
Patch Description:
This patch corrects the failures by changing $base_notices_file from
"en/default/sample_notices.sql" to "en/mandatory/sample_notices.sql"
Test Plan:
1) Drop into koha-shell and run the command 'prove xt/sample_notices.'
2) 11 unit tests fail.
3) Apply the patch.
4) Re-run 'prove xt/sample_notices.t'
5) All of the tests pass now.
6) Quit out of koha-shell
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Failed test 'ListMetadataFormats'
at t/db_dependent/OAI/Server.t line 150.
Structures begin differing at:
$got->{responseDate} = '2017-06-12T14:31:51Z'
$expected->{responseDate} = '2017-06-12T14:31:50Z'
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Tue, 30 May 2017 06:41:53 +0000 (08:41 +0200)]
Bug 18694: Translatability: Get rid of exposing [%% FOREACH in csv/cash_register_stats.tt
Code exposed is:
%s %s %s [%%- FOREACH field IN row; field IF !loop.last; ItemTypes.GetDescription(field) IF loop.last; sep IF !loop.last; END %%] %s TOTAL [%%- FOREACH field IN total; field; sep IF !loop.last; END %%]
Similar for: csv/orders_by_budget.tt
To test:
- Apply patch
- In staff client, verify that Cash register statistics work as before
(Home > Reports > Cash register statistics)
- Verify the same for Home > Reports > Orders by fund (triggers orders_by_budget.tt)
- Bonus test: Create a "language" aa-AA (perl translate create aa-AA
from folder misc/translator, verify that lines mentioned above do
no longer appear in aa-AA-staff-prog.po )
- Run QA tools (newest version with test for newlines in tt directives)
Rebased on top of Bug 18734 2017-12-06 / mv
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Wed, 24 May 2017 13:46:50 +0000 (13:46 +0000)]
Bug 18656 - Require confirmation of deletion of files from patron record
This patch adds a JavaScript confirm to the deletion of files. It also
styles the file deletion link as a Bootstrap button.
To test, apply the patch and open the "Files" page for a patron who has
files attached.
- Verify that clicking any "delete" link prompts for a confirmation.
- Verify that confirming the dialog triggers the deletion of the correct
file.
- Verify that canceling the confirmation dialog aborts the deletion.
- Confirm that the "Delete" button looks correct.
Signed-off-by: David Roberts <david.roberts@ptfs-europe.com>
Revision for QA: Replaced '.click(function' with '.on("click",function'
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Fri, 9 Jun 2017 23:23:49 +0000 (19:23 -0400)]
Bug 18411: Fix failing search_utf8.t tests
TEST PLAN
---------
export KOHA_INTRANET_URL=...
prove -v t/db_dependent/www/search_utf8.t
something like seen before failure:
t/db_dependent/www/search_utf8.t .. 9/66 Error GETing http://koha_16_11:8080/cgi-bin/koha/tools/background-job-progress.pl?jobID=741d649f9d4472fe75f30761ba2488c0: Bad Request at t/db_dependent/www/search_utf8.t line 170.
apply this patch
prove -v t/db_dependent/www/search_utf8.t
Now it is the marc staging that is failing.
And that is failing in master for me.
So, I don't think it is the test that is a problem at this point,
but the actual staged marc records process.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
I'm not sure why you had problems. All 66 tests passed
after patch application and the patch also passes QA Tools.
I tested this patch on a brand new kohadevbox without issue.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Julian Maurice [Wed, 7 Jun 2017 09:29:46 +0000 (11:29 +0200)]
Bug 18741: Fix loading of SQL files in web installer
Test plan:
1. Start a normal install using the web installer
2. When asked to select data to load, verify that
'message_transport_types' is checked, and check some optional data
files
3. Continue the install to the end
4. Verify that message_transport_types is not empty, and that the
optional data you checked is there
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fridolin Somers [Wed, 31 May 2017 14:10:41 +0000 (16:10 +0200)]
Bug 18706 - Remove useless Javascript
Whe checking a subfield to be deleted, the code
$(this).val($(this).siblings("[name='subfield']").val());
is useless, the checkbox already contains the subfield code :
<input type="checkbox" ... name="disable_input" value="[% ite.subfield %]" />
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fridolin Somers [Wed, 31 May 2017 14:02:44 +0000 (16:02 +0200)]
Bug 18706 - subfields to delete not disabled anymore in batch item modification
In Tools > Batch item modification, one can click a checkbox to delete a subfield.
This click use to disable the input to change the field value.
This comes from the patch : Bug 13501: Move "Required" and checkbox after input/select
Because input is found using JQuery next().
This patch replaces with $(this).parent().find("[name='field_value']").
Test plan :
- Go to Tools > Batch item modification
- Enter a barcode and submit
- Click on a checkbox on a non-mandatory subfield
=> Without patch the input or select is not disabled
=> With patch the input or select is disabled
- Submit
=> Check that subfield is deleted
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18716: Remove CGI::param warns from updatesupplier.pl
This script floods the logs with this kind of warnings.
To test:
- Run:
$ koha-plack-err
- Edit a vendor in the acquisitions module
- Save
=> FAIL: Logs show lots of warnings that look like:
CGI::param called in list context from package CGI::Compile::ROOT::home_vagrant_kohaclone_acqui_updatesupplier_2epl
- Apply this patch
- Run:
$ restart_all
$ koha-plack-err
- Edit a vendor, add/delete vendor contacts
=> SUCESS: No more warnings
- Verify editing and storing vendor contacts works as expected.
- Sign off :-D
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18767: Remove useless diags from GetDailyQuote.t
This tests print useless debugging info.
To test:
- Run:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ prove t/db_dependent/Koha/GetDailyQuote.t
=> FAIL: Some output telling what is doing on each step is printed.
- Apply the patch
- Run
k$ prove t/db_dependent/Koha/GetDailyQuote.t
=> SUCCESS: No output, YAY!
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Mon, 5 Jun 2017 04:52:58 +0000 (06:52 +0200)]
Bug 18727: System preferences loose part of values because of double quotes
System preferences do not display values of text fields properly if they
contain doulbe quotes.
To recreate:
- Go to Home > Administration > System preferences , then tab Acquisitions
- Enter values to both system preferences like proposed in the example (o=5|a="bar foo" and o=5|a="foo bar")
- Save
- Click on tab Acquisitions to reload
- Wrong result: Both preferences show a value of: o=5|a=
(parts with double quotes are truncated)
- Edit any of the email addresses (Bug 9814):
KohaAdminEmailAddress, NoticeBcc, ReplytoDefault, PayPalUser
- Set value to: "The Library" <thelibrary@example.com>
- Search for this email address syspref to re-display it
- Wrong result:
Use [ ] " autocomplete="off" /> as the email address for the
administrator of Koha.
To test:
- Apply patch
- Try to recreate issues above
- Additionally, edit other system preferences that could contain double
quotes, e.g. LibraryName or UsageStatsLibraryName
- Set value to: Bibliothek "Zur Leseratte"
(Note: patch contains a tiny fix for a typo in acquisitions.pref)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Sun, 4 Jun 2017 16:04:00 +0000 (18:04 +0200)]
Bug 18689: calendar error with double quotes in title or description of holiday
This patch fixes the calendar display with holidays having double qoutes in
title or description.
To test:
- Apply patch
- Go to Home > Tools > Calendar
- Create new holidays of each type (Day only, repeated wekly/yearly,
range, yearly repeated range and enter double qoutes in their titles and
descriptions
- Verify that calendar displays and works as expected
- Verify that you can edit the holidays
Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Josef Moravec [Mon, 5 Jun 2017 11:20:18 +0000 (11:20 +0000)]
Bug 18722: Fund name is not shown in received orders fund subtotals
Test plan:
1) Go to acquisition and receive some orders
2) Show the receive summary for invoice
--> without patch, the fund name in subtotal is not shown
--> with patch the name is shown as expected
Signed-off-by: Michael Cabus <michael@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Mon, 5 Jun 2017 16:24:07 +0000 (12:24 -0400)]
Bug 18730: Batch Mod Edit <label> HTML validation fails
[tag] [reply] [−] Description M. Tompsett 2017-06-05 16:30:21 UTC
Know the barcode of an existing item.
Home -> Tools -> Batch Item Modification
Enter the barcode
Click
View Page source
select and copy it into validator.w3.org direct input.
There will be complaints about <labels>.
Apply this patch
refresh the page.
select and copy it into validator.w3.org direct input.
There will be no complaints about <labels>.
This is intended to be a highly focused HTML bug, as the
missing form tag which will fix the <div> issues at the bottom
is corrected on bug 18710.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Mark Tompsett [Wed, 7 Jun 2017 22:07:13 +0000 (18:07 -0400)]
Bug 18746: Text_CSV_Various parse failures
While it might be an idea to just delete it,
this patch attempts to catch everything and make it
clear that Text::CSV::Unicode (binary) is the parser
that should be used.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Running 'prove xt/author/Text_CSV_Various.t' passes
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Sat, 20 May 2017 07:18:10 +0000 (09:18 +0200)]
Bug 18641 - Translatability: Get rid of template directives in translations for *reserves.tt files
Template directives should not be exposed in translation, but lines like the following pop up in the translation tool:
Cancel [% IF TransferWhenCancelAllWaitingHolds %]and Transfer [% END %] All
This patch fixes it.
To test:
- Apply patch
- Verify that code changes make sense
- Verify that submit buttons of pendingreserves.tt and waitingreserves.tt
still work and display the same string as before
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 18641: (RM-followup) for waitingreserves.tt
Code changed for waitingreserves.tt as asked for in comment #7
Bug 18641: Followup for pendingreserves.tt (less %s)
Change as of comment #13 to reduce %s
After creating a new translation for a "language" aa-AA, we have
the following in the file aa-AA-staff-prog.po
msgid ""
"(Inclusive, default is %s days ago to %s days ahead. Set other date ranges "
"as needed.)"
msgstr ""
msgid ""
"(Inclusive, default is %s days ago to today. Set other date ranges as "
"needed.)"
msgstr ""
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Thu, 8 Jun 2017 14:54:18 +0000 (11:54 -0300)]
Bug 18759: Try to fix random failure from Circulation.t
Circulation.t is failing randomly on our CI
https://jenkins.koha-community.org/job/Koha_Master_D8/192/console
# Failed test at t/db_dependent/Circulation.t line 1147.
# got: '1'
# expected: '0'
# Failed test at t/db_dependent/Circulation.t line 1152.
# got: '1'
# expected: '0'
# Failed test at t/db_dependent/Circulation.t line 1156.
# got: '1'
# expected: '0'
# Failed test at t/db_dependent/Circulation.t line 1170.
# got: '1'
# expected: '0'
# Failed test at t/db_dependent/Circulation.t line 1184.
# got: '1'
# expected: '0'
# Looks like you failed 5 tests of 23.
Sometimes one of the alert or impossible flags is set.
This patch guesses that it's because of the 'restricted' value of the item that is evaluated to 1.
If it is not fixed by this patch, we will have more info next time (at least know
if alert or impossible is set).
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The fix is trivial. Using random data will lead to this situations. The good thing is that
it lets us spot places in which tests need more fine-grained data.
Jonathan Druart [Wed, 15 Mar 2017 22:50:18 +0000 (19:50 -0300)]
Bug 18296: C4::Items - Remove GetItemInfosOf
At this point this subroutine is only used once, from reserve/request.pl.
Since we already have the items, it's easy to populate the different
hashes as the rest of the code is expecting it.
Test plan:
You need to create analytical record relationships (
EasyAnalyticalRecords needs to be set). Link an item to a biblio using
the 'Edit > Link to host item' menu from the biblio detail page.
From the staff interface place a hold on the biblio. You should see the
items from the biblio and the one you just linked
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
projects / koha.git / log