David Cook [Tue, 27 Aug 2024 03:50:44 +0000 (03:50 +0000)]
Bug 37742: Fix error display
This change fixes the display of the error message on "My virtual card"
on the OPAC.
Test plan:
0. Apply the patch and enable syspref "OPACVirtualCard"
1. Go to http://localhost:8081/cgi-bin/koha/members/memberentry.pl
?op=edit_form&destination=circ&borrowernumber=51
2. Add an asterisk (*) to the end of the card number
3. Go to http://localhost:8080/cgi-bin/koha/opac-virtual-card.pl
4. Note that the error message appears as follows:
Code 39 must contain only digits, capital letters, spaces and the symbols -.$/+%
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 17 Oct 2024 10:09:23 +0000 (12:09 +0200)]
Bug 38192: Fix restoration of table state for suggestion tables
There is one table per tab, the id of the table is table_N.
Say you have:
Pending (#table_1), Accepted (#table_2), Rejected (#table_3)
The state will be stored in localStorage with the following key:
DataTables_table_1_/cgi-bin/koha/suggestion/suggestion.pl
DataTables_table_2_/cgi-bin/koha/suggestion/suggestion.pl
DataTables_table_3_/cgi-bin/koha/suggestion/suggestion.pl
If you move all the suggestions from Accepted to Rejected, a shift will
give: Pending (#table_1), Rejected (#table_2) And the previous state
from the "Accepted" tab will be used for "Rejected"
Test plan:
Confirm the above, have several tabs then remove one by moving the
all suggestions to an other tab.
Test the other features on the edit and list views:
change status, update manager, etc.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 17 Oct 2024 09:20:20 +0000 (11:20 +0200)]
Bug 38191: Restore collapse/expand of filters on the suggestions page
Test plan:
Go to http://localhost:8081/cgi-bin/koha/suggestion/suggestion.pl
Confirm that you can expand the filters blocks on the left
Filter by:
Bibliographic information
Suggestion information
Acquisition information
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Paul Derscheid [Fri, 25 Oct 2024 12:25:40 +0000 (12:25 +0000)]
Bug 38272: Add permission check for erm permission to additional-fields.tt
To test:
1) Create a user with just erm and catalogue permissions.
2) Open additional-fields.pl
3) Notice that nothing is displayed
4) Change the permission of the user to just manage aquisition orders and catalogue
5) Navigate back to additional-fields.pl
6) Notice that nothing is displayed
7) Apply patch
8) Repeat 1-6 but notice this time that the respective entries are displayed
9) Sign off
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Wed, 16 Oct 2024 15:00:29 +0000 (16:00 +0100)]
Bug 33736: Don't allow sorting on Location
We need some special handling to sort on Location as it's got both a
custom renderer and relies on _strings so the ordering and search won't
return expected results without some custom function building.
Sponsored-by: PTFS Europe Ltd Signed-off-by: Esther Melander <esther@bywatersolutions.com> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Wed, 16 Oct 2024 09:38:32 +0000 (10:38 +0100)]
Bug 33736: Ensure datatable filter row takes visible into account
We clone the header row, and then iterate it assuming the iterator index
lines up with the column definition index of the datatables settings.
However, if a column is hidden, this is not the case. Said column will
not appear in the header row that's cloned and as such your iterator
will no longer line up with the column settings index number of the
settings array.
Sponsored-by: PTFS Europe Ltd Signed-off-by: Esther Melander <esther@bywatersolutions.com> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Fri, 16 Aug 2024 15:18:41 +0000 (16:18 +0100)]
Bug 33736: Add item location and filter by library to bookings to collect report
This patch adds a new 'Location' field to the bookings to collect
report. We display with the current item location or an onloan status
with the due date.
We also add filtering for status != 'waiting' to the base query to rule
out items marked as ready for collection already (however, we don't yet
have a way of marking such a status so this won't have any effect yet).
Sponsored-by: PTFS Europe Ltd Signed-off-by: Esther Melander <esther@bywatersolutions.com> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Thu, 15 Aug 2024 16:04:01 +0000 (17:04 +0100)]
Bug 33736: Add filter for holding library
This patch adds the option to filter the pending bookings to collect report by
items current holding library and defaults to the users logged in library.
We also add the 'Pickup library' column to the report output so staff
know whether the item needs collecting for sending to another library or
for their own.
Sponsored-by: PTFS Europe Ltd Signed-off-by: Esther Melander <esther@bywatersolutions.com> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Mon, 9 Aug 2021 17:46:00 +0000 (13:46 -0400)]
Bug 28833: Speed up holds queue builder via parallel processing
The holds queue builder can take a very long time to run on systems with many holds. For example, a partner with 124,784 unfilled ( not found ) holds, is taking about 64 minutes to run. If we run that same number of holds in 5 parallel chunks ( splitting the number of records as evenly as possible, but *not* taking into account the holds per bib ), it takes 21.5 minutes. If we use 10 loops, it takes less then 14 minutes.
Test Plan:
0) Install the Perl library Parallel::ForkManager
1) Generate a huge number of holds ( a few thousand at the minimum )
2) Run the holds queue builder, use the `time` utility to track how much
time it took to run
3) Set HoldsQueueParallelLoopsCount to 10
4) Repeat step 2, note the improvement in speed
5) Experiment with other values for HoldsQueueParallelLoopsCount
6) prove t/db_dependent/HoldsQueue.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Johanna Raisa [Tue, 3 May 2022 07:39:56 +0000 (10:39 +0300)]
Bug 30661: Allow to update more hold parameters via REST API
This patch adds hold_date and expiration_date to holds edit endpoint
Test plan:
1) prove t/db_dependent/api/v1/holds.t
Sponsored-by: Koha-Suomi Oy Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 13 Feb 2024 11:48:35 +0000 (11:48 +0000)]
Bug 36064: (follow-up) Activate correct tab
This patch makes a change to the JavaScript on waitingreserves.pl so
that the correct tab is activated if you follow the "Holds with
cancellation requests" link on the home page.
The page has code to activate the last viewed tab, but I've modified it
so that if there is a location hash ('waitingreserves.pl#tab') the tab
specified in the hash is selected instead of the last used tab.
If there is no location hash the last active tab will be activated.
I've also corrected the location hash in the link on the home page.
To test, apply the patch and follow the "Holds with cancellation
requests" link. The "Holds with cancellation requests" tab should be
active.
Click a different tab, e.g. "Holds waiting." Go the the circulation home
page, then click the link for "Holds awaiting pickup." The tab you
selected should be active.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Mon, 29 Apr 2024 20:55:11 +0000 (20:55 +0000)]
Bug 36064: Add holds with cancellation request info to staff interface main page
To Test:
1. APPLY PATCH, restart_all
2. Make some holds
3. Make sure there is a Default waiting hold cancellation policy.
4. Make the holds watiing by checking them in.
5. Go to the OPAC and request to cancel.
6. Go to the staff interface home page, you should see 'Holds with
cancellation requests: X'.
7. Cancel the hold.
8. Back on the main page it should not be counted again the number for
'Holds with cancellation requests: X'
9. Log in as a staff member with Staff access but without
circulate_remaining_permissions.
10. You should not see the 'Holds with cancellation requests: X' line.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Johanna Raisa [Mon, 2 May 2022 08:49:11 +0000 (11:49 +0300)]
Bug 30660: Add cancellation reason to holds delete endpoint
This patch adds cancellation reason to holds delete endpoint.
Test plan:
1) prove t/db_dependent/api/v1/holds.t
PA amended: tidy
Sponsored-by: Koha-Suomi Oy Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jan Kissig [Thu, 4 Jul 2024 11:37:47 +0000 (13:37 +0200)]
Bug 37253: Enhance POST /checkouts endpoint to accept barcode or item_id
This patch adds external_id as a body param in POST /checkouts which acts as the items barcode.
This enhances the checkouts route to checkout items directly via barcode which could be useful for external
tools like Koha Offline Circulation Tool
Test plan:
a) apply patch
b) enable system preference RESTBasicAuth
c) check out an item via an API testing tool. Be sure that item is not checked out already.
Auth: username: koha & password: koha
Body JSON:
{
"external_id" : "39999000011418",
"library_id": "CPL",
"patron_id": 5
}
POST http://localhost:8081/api/v1/checkouts
d) check response code 201 and response content
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Thu, 17 Oct 2024 11:02:10 +0000 (12:02 +0100)]
Bug 38175: (QA follow-up) DRY out PATCH handling
We were repeating some code for the PATCH endpoint instead of using the
existing update handling code. This lead to two issues:
1) We weren't catching status updates on standard updates, only the
patch.
2) We were limiting the PATCH endpoint to just status updates when it
could happily be used for other fields too.
This patch removes the introduction of the 'edit' method from both the
REST controller and the corresponding object and moves the logic into
the store method of the object where it's easily testable.
We also DRY out the notice sending code a little for re-use.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Paul Derscheid [Wed, 16 Oct 2024 12:13:42 +0000 (14:13 +0200)]
Bug 38175: (follow-up) Refactor staff interface additions to vanilla JS; adjust modules, controllers for coding guidelines and consistency
In the spirit of the current movement for more modern JS, the refactor tries to limit jQuery usage.
Test plan:
1) Create a booking on a bookable item
2) Cancel it and see that it's simply deleted
3) Apply the patch and run “restart_all”.
4) Repeat the same cancel operation and see that it's still there, albeit with a different appearance.
5) Try the filters in the table
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Thibaud Guillot [Tue, 15 Oct 2024 12:38:40 +0000 (12:38 +0000)]
Bug 38175: Add tests
Sponsored by: BibLibre Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Thibaud Guillot [Tue, 15 Oct 2024 12:29:22 +0000 (12:29 +0000)]
Bug 38175: Improve Bookings feature with status
With the integration of the new status column for bookings, it would be preferable to keep the booking in database and simply change its status to 'cancel' when you cancel it via the action button or the timeline.
So I've added partial updating via the API with a new PATCH method to partially edit a booking. It is currently active for status changes.
Graphically, this translates into the disappearance of the action buttons if the booking has already been canceled, although it remains visible in the table and timeline (the style is a proposal for the moment, intended simply to graphically differentiate a canceled booking from others).
I've also added a filter to the filter_by_active method to exclude cancelled bookings.
Test plan:
1) Create a booking on a bookable item
2) Cancel it and see that it's simply deleted
3) Apply the patch and run “restart_all”.
4) Repeat the same cancel operation and see that it's still there, albeit with a different appearance.
5) Try the filters in the table
Sponsored by: BibLibre Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Paul Derscheid [Mon, 2 Sep 2024 10:42:11 +0000 (12:42 +0200)]
Bug 37803: Add patron notification when a new booking has been created successfully
To test:
1) Apply the patch
2) Include the sample notice, e.g. run 'reset_all' on ktd
3) Create a booking
4) Look into the borrower notifications
5) Confirm the notice has been generated
6) Run t/db_dependent/Koha/Booking.t
Signed-off-by: LEBSimonsen <simonsen@bz-sh.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Sponsored-by: Büchereizentrale Schleswig-Holstein <https://www.bz-sh.de/> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We should use the notice from the library that initiated the action that
triggered the notice. This should be available to us always in the
userenv.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Sponsored-by: Büchereizentrale Schleswig-Holstein <https://www.bz-sh.de/> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Wed, 16 Oct 2024 15:34:58 +0000 (16:34 +0100)]
Bug 37204: (QA follow-up) Pass old_booking into GetPreparedLetter
Thinking about the future, some libraries may wish to use the
old_booking object details in their notice so I opt to pass it into
GetPreparedLetter here to support that.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Sponsored-by: Büchereizentrale Schleswig-Holstein <https://www.bz-sh.de/> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Paul Derscheid [Wed, 28 Aug 2024 11:22:00 +0000 (13:22 +0200)]
Bug 37204: Add a booking has changed notice to update a patron should a booking be updated
This is a first draft. When reading your initial statement again I'm asking myself whether
a changed itemnumber is relevant to the patron.
The way I see it, the relevant fields are:
- pickup_library_id
- start_date
- end_date
But maybe I'm not seeing it.
To test:
1) Apply the patch
2) Make an item bookable
3) Add a booking for a given patron
4) Check the patron notices tab, should not contain any notices
5) Change either start date, end date or pickup library and save
6) Check the patron notices tab, should contain a notice with the updated details
7) Run the tests under t/db_dependent/Koha/Booking.t
8) Sign off
Signed-off-by: LEBSimonsen <simonsen@bz-sh.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Sponsored-by: Büchereizentrale Schleswig-Holstein <https://www.bz-sh.de/> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Michał Kula [Wed, 17 Jul 2024 11:42:36 +0000 (11:42 +0000)]
Bug 37391: Make QR code for bibliographic record in OPAC use canonical link
In /opac-detail.pl page there's an option to show a QR code to open up
said record on your phone or share it with others in such a way.
Currently, it simply uses the current `location.href` of the browser.
This isn't ideal, because such URL can be much longer, resulting in
more complex/harder to scan QR code, plus URL parameters can contain
extra junk, such as our previous search query that led us to current
record, which we might not necessarily want to share.
Thus, now having simple canonical URLs after the "Depends On" patch was
merged in, we can replace these QR codes to link to them instead.
To test:
1. Visit biblio detail page in OPAC
2. Click the button to show QR code in the right pane (preference
'OPACDetailQRCode' must be enabled)
3. Notice that the QR code is much simpler/less complex now
4. Scan the QR code with your phone and confirm it's in the desired
format of <URL>/bib/123 and that it opens up properly
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Test plan:
- Start KTD with Elastic: ktd --es7 up
- Edit a record, e.g. "Dom Casmurro : a novel" and change the language
code in 008/35-37 from "eng" to "nor":
Before: 980914s1997 nyu 00011 eng b
After: 980914s1997 nyu 00011 nor b
- Do a search that finds the edited record and some other records,
so you can see the list of resulots and the facets, e.g. "dom"
- Verify that "nor" is shown in the languages facet
- Apply this patch and run koha-upgrade-schema kohadev
- Do the search again and verify that "Norwegian" is now shown instead
of "nor"
Signed-off-by: Thomas Klausner <domm@plix.at> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jake Deery [Thu, 24 Oct 2024 08:12:09 +0000 (08:12 +0000)]
Bug 30955: (follow-up) Merged related notices into lists
This patch merges the SHARE_ACCEPT and SHARE_INVITE notices into the
lists module. This makes a clearer case for introducing the lists module
in the first place.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Wed, 23 Oct 2024 13:26:39 +0000 (14:26 +0100)]
Bug 30955: (QA follow-up) Reduce database hits and clarify notice
This patch updates the library selection from using the new owners home
library to using the current sessions library in keeping with the
direction of travel in other bugs of this type in Koha currently.
We also update the default notice text to clarify who sent the notice vs
who previously owned the list.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new notice, TRANSFER_OWNERSHIP, under a new module,
Lists. When a list is transferred to a new owner, this notice is
triggered, containing a short paragraph detailing the list name.
TO TEST:
a) log in as a koha superlibrarian
b) go to the lists module, create a public list, and make a note of the
title used
c) on the lists module, transfer the list to some other user, and make
a note of the user used
d) go to the patron notices page for the user in step c
e) ensure that a notice has been generated
1) check the contents of the notice, it should contain
- the new owner's name
- the list's title
- the old owner's name & (if set) email
f) under tools > notices, modify the notice for TRANSFER_OWNERSHIP
g) repeat steps c-e
1) ensure the modifications you've made are now visible in the notice
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Julian Maurice [Fri, 4 Oct 2024 11:41:44 +0000 (13:41 +0200)]
Bug 37888: Show all jobs, order by "queued", remove last hour filter
By default the background jobs page now shows the most recently queued
jobs, whatever their status is.
By doing that, the jobs enqueued less an hour ago are always visible if
there are any (well, the first page at least), so the "last hour" filter
becomes way less useful and it's better to remove it as it caused
problems (see bug 37905) and the "1 hour" duration was arbitrary.
The "current jobs only" filter is still useful as lots of quick
background jobs can push running jobs away from the first page and it's
a common use case to list running jobs
Test plan:
1. Start some background jobs (batch item modification for instance)
2. Make them run and wait for finish
3. Stop the background jobs workers
4. Start some more background jobs
5. You should now have running and non-running background jobs. Go to
the admin background jobs page
6. Verify that all background jobs are shown and that they ordered by
queued time (last queued job first)
7. Verify that "Current jobs only" filter still works
Signed-off-by: Eric Phetteplace <phette23@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Fri, 16 Aug 2024 11:01:31 +0000 (11:01 +0000)]
Bug 35287: (QA follow-up): Squash
Remove leftover unused code
Add missing pod
Tidy
Removed redundant commented in AdditionalFields_spec.ts
Run:
qa -c 11 -v 2
Verify everything is green
Sponsored-by: UKHSA - UK Health Security Agency Sponsored-by: PTFS Europe Ltd Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Fri, 26 Jul 2024 14:24:44 +0000 (14:24 +0000)]
Bug 35287: (Follow-up 37389): ExtendedAttributes
Apply ExtendedAttributes Mixin to AdditionalFields
To test the ExtendedAttributes mixin search is working:
1) Create 2 or more searchable licenses additional fields
2) Create a new license and enter values in these searchable fields
3) Go to the licenses list, use the column filters to search on more
than one column, verify that the search work as intended (AND operator)
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Wed, 8 Nov 2023 12:35:29 +0000 (11:35 -0100)]
Bug 35287: Vue - Add additional fields support to ERM Licenses
Test plan, k-t-d:
1) Add a new additional field for the newly supported 'erm_licenses', visit:
/cgi-bin/koha/admin/additional-fields.pl?tablename=erm_licenses
2) Create 4 fields by clicking on '+ New field'
2.1) 'text non-repeatable'
2.2) 'text repeatable', check the 'repeatable' box
2.3) 'av non-repeatable', pick an authorised value category
2.4) 'av repeatable', pick an authorised value category and check the 'repeatable' box
3) Add a new ERM license, visit:
/cgi-bin/koha/erm/licenses/add
4) Notice there is now a 'Additional fields' section at the bottom listing the fields we created
5) Fill in the mandatory regular license fields and play around with the additional fields
5.1) Put in some text in the text fields, test out the 'clear' and '+new' buttons
5.2) Select some AV options from the AV fields, deselect them, notice the repeatable one allows for multiple selection, the non-repeatable one does not
6) Save the license. On the list table, click on the license name (to navigate to the show page), or if license id=1, visit:
/cgi-bin/koha/erm/licenses/1
7) Notice the additional fields are listed there, AV fields show their human readable description, not the AV code. Repeatable fields are shown comma separated
8) Edit the license, visit:
/cgi-bin/koha/erm/licenses/edit/1
9) Play around again, do some more inserting and deletion of additional fields. Save. Notice everything is as expected.
Searchable testing:
10) Go back to the additional fields admin panel, visit:
/cgi-bin/koha/admin/additional-fields.pl?tablename=erm_licenses
11) Edit one field (AV or not) that you have inserted some data in, in the previous steps, and tick the 'searchable' box
12) Go back to licenses, visit:
/cgi-bin/koha/erm/licenses
13) Notice the searchable additional field now has its own column in the licenses list table
14) If the searchable field is AV, it has a dropdown with the AV values of the same AV category
15) If the searchable field not AV, it has a text input that allows for normal text search
16) If the searchable field is repeatable and has multiple values, its displayed in comma separated
Signed-off-by: Edith Speller <edith.speller@ukhsa.gov.uk> Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This follows the same pattern as in subscription serials searchable additional fields, i.e. if an additional field is searchable, it is added to the list table - with the corresponding search inputs and functionality
Signed-off-by: Edith Speller <edith.speller@ukhsa.gov.uk> Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Wed, 8 Nov 2023 12:34:19 +0000 (11:34 -0100)]
Bug 35287: Vue preparation - AdditionalFields
New api client: additional-fields-api-client.js to interact with the REST endpoint introduced by bug 35197
2 new components:
- AdditionalFieldsEntry: Component used to extend the FormAdd component including the corresponding additional fields
- AdditionalFieldsDisplay: Component used to display the additional fields associated to a data record implementing it (makes use of strings_map)
Signed-off-by: Edith Speller <edith.speller@ukhsa.gov.uk> Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Koha::Object::Mixin::AdditionalFields needs to come before Koha::Object
in the inheritance so that the strings_map method that is called is
the one from Mixin and not from Koha::Object.
This is only required for Koha classes implementing the AdditionalFields Mixin and expose data through the REST API, because strings_map is implement in both the aforementioned classes
Signed-off-by: Edith Speller <edith.speller@ukhsa.gov.uk> Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The mixin now implements the extended_attributes method to be utilized by any Koha class that implements the AdditionalFields Mixin and is exposed through the REST API
It also implements a strings_map to be utilized in the same fashion as described above. This is useful because additional fields may be an authorised value
Signed-off-by: Edith Speller <edith.speller@ukhsa.gov.uk> Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Thu, 26 Sep 2024 13:00:26 +0000 (13:00 +0000)]
Bug 33292: Add unit tests
Test plan:
1) In KTD, set ClaimReturnedLostValue to any value
2) Checkout an item to a patron
3) Add a manual invoice to that patron's account against that item barcode
4) In the patron's checkouts table, click the Claim returned button
5) The checkbox will have the option to "Refund previous lost fee"
6) Tick this box and submit
7) Have a look at the patron's transactions. There will now be a new line refunding the lost fee from step 3
8) Run the unit tests
prove t/db_dependent/Circulation/ReturnClaims.t
prove t/db_dependent/api/v1/return_claims.t
Signed-off-by: Kristi Krueger <kkrueger@cuyahogalibrary.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Cook [Wed, 23 Oct 2024 22:35:00 +0000 (22:35 +0000)]
Bug 38248: Fix condition when item has no return_claims in API response
This change just fixes a condition to not break when an item has no return_claims
in an API response.
Test plan:
0) Apply the patch and koha-plack --restart kohadev
NOTE: You may need to rebuild your swagger spec since bug 27919 was pushed
redocly bundle --ext json api/v1/swagger/swagger.yaml \
--output api/v1/swagger/swagger_bundle.json
1) Go to http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=29
2) Create an item with a status of "Lost"
3) Go to http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=29
4) Note that the item table loads without a problem
5) In system preferences, set the ClaimReturnedLostValue syspref to any value
6) Checkout an item to a patron
7) Click "Claim returned" and make the claim
8) Go to http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=29
9) Note that the item table loads without a problem and "(Claimed returned") appears
for the item that was claimed returned
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Wed, 23 Oct 2024 13:34:09 +0000 (15:34 +0200)]
Bug 38240: Do not hide columns if no items to display
If you filter items using the column filters and that no item are displayed, all columns will be hidden (because no data for those columns) and it is then impossible to reset the filters show items again.
Test plan:
http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=4
All items are from CPL
Select another library
=> No items displayed
Without this patch the headers are hidden and it's impossible to modify
the filters
With this patch the columns that were displayed on the last draw are
still there, letting you modify the filters
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Tue, 8 Oct 2024 11:11:54 +0000 (11:11 +0000)]
Bug 38117: Only show 'not checked in' message if item is checked out
To test:
1 - Enable system preference 'ShowAllCheckins'
2 - Set system preference 'BlockReturnOfWithdrawnItems' to 'Block'
3 - Check in an item
4 - Note 'Item was not checked in message'
5 - Confirm it happens for any item that is not currently issued
6 - Check out an item to a patron
7 - Mark the item as withdrawn
8 - Check the item in
9 - Note message 'Item was not checked in' appears too
10 - Apply patch
11 - Confirm checking in an item not checked out only shows 'Not checked out'
12 - Confirm the withdrawn item still shows 'Item was not checked in'
13 - Confirm above message remains whne checking in more items that were not issued
Signed-off-by: Michelle Spinney <mspinney@clamsnet.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kevin Carnes [Mon, 12 Aug 2024 08:55:57 +0000 (10:55 +0200)]
Bug 36171: Fix template toolkit tags split by HTML parser
It appears that the template parser parses HTML tags first and then template
toolkit tags. This can cause a template toolkit tag that contains an HTML tag
to have its start and end markers separated. This causes it to be treated as
text that can be translated instead of a template toolkit tag.
This patch searches for text sections that have a template toolkit end marker
without a start and then searches for the start in previous sections. It then
creates a new template toolkit section with the start and end markers.
The action buttons in the staff Lists view have been changed to allow
translation.
To test:
1. You will need to edit the staff-prog.po for a language and modify the
the translation for "SET line_break". You can change SET to FOO.
2. Install the translation for the language.
3. View the details of a patron in the staff interface with the language.
4. The page will have an error.
5. Apply the patch.
6. Install the translation for the language.
7. View the details of a patron in the staff interface with the language.
8. The page should now display correctly.
If you want to, you can run "gulp po:update --lang LANGUAGE-CODE" to make sure
that the template tag is no longer included in .po file.
You can also add translations for "Edit", "Delete", and "Transfer" in
messages.po to make sure that the action buttons are translated in the Lists
view.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Amended-by: Jonathan Druart
Tidy
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Alex Buckley [Wed, 10 Jul 2019 17:28:23 +0000 (17:28 +0000)]
Bug 23295: Automatically restrict (debar) patrons when email/sms notices fail
When the 'RestrictPatronsWithFailedNotices' syspref is enabled then
patrons with email and sms notices which failed sending (have a
message_queue.status field of 'failed') have a restriction (debarment)
applied to them.
Test plan:
1. In the Koha staff client > Tools > Overdue notice/status triggers and
create the 'First' rule for all patron categories as:
Delay: 1
Letter: Overdue Notice
SMS: ticked
Ensure you have an SMS notice for the ODUE letter.
2. In the system preferences make sure you enter dummy data into the
SMSSendUsername, SMSSendPassword and EmailSMSSendDriverFromAddress
sysprefs
2. Find two non-debarred patrons and make sure they have invalid SMS numbers set. The SMS numbers must be INCORRECT, for example "123" as an SMS number. Leaving this field empty will result in the message_transport_type defaulting to 'print' instead of 'sms'.
3. Check one item out to each patron in step 2
4. Jump into the database and run the query:
UPDATE issues SET date_due=<2 days before current date> WHERE
borrowernumber=<borrower1>;
UPDATE issues SET date_due=<2 days before current date> WHERE
borrowernumber=<borrower2>;
5. Go to misc/cronjobs directory and enter the Koha shell:
sudo koha-shell <instancename>
6. Run: ./overdue_notices.pl
7. Exit the shell and jump back into the database and run the query:
SELECT message_transport_type, status FROM message_queue WHERE
borrowernumber=<borrower1> OR borrowernumber=<borrower2>;
8. Confirm both new notice records have the message_transport_type is 'sms' and the status of 'pending'
9. Exit the database and re-enter the Koha shell and run the command:
./process_message_queue.pl
10. Jump back into the database re-run the query from step 7 and confirm
the status is 'failed' for both
11. Also run the query:
SELECT * FROM borrower_debarments WHERE borrowernumber=<borrower1> OR
borrowernumber=<borrower2>;
Notice there is no added debarment to these two patrons
12. Apply patch, restart memcached and plack. In the
installer/data/mysql directory enter the Koha shell and run the command:
./update_database.pl
13. In the Administration > Global System Preferences interface of the
staff client notice there is a new system (set to "Don't" by default)
named 'RestrictPatronsWithFailedNotices'.
Enable it (i.e. select 'Do')
14. Create a new file in the /etc/cron.daily directory named koha-custom and
add the following line to it:
15. In the misc/cronjobs directory enter the Koha shell and run the command:
./restrict_patrons_with_failed_notices.pl
16. The script should output text saying: There are borrowers with
failed SMS or email notices
However because you haven't given the script the argument -c it won't
apply debarments (restrictions) to any of the patrons with the failed
SMS or email notices.
16. Query the borrower_debarments table:
SELECT * FROM borrower_debarments WHERE borrowernumber=<borrower1> OR
borrowernumber=<borrower2>;
Notice they still have no restriction
17. Now in the Koha shell run the command:
./restrict_patrons_with_failed_notices.pl -c
18. Notice the script outputs the text:
There are borrowers with failed SMS or email notices
Applying restriction to patron <borrowernumber>: <borrower firstname>
<borrower surname>;
19. Repeat step 16 and notice both patrons now have 1 restriction each
with the borrower_debarments.type=SUSPENSION and comment=SMSnumber
invalid and expiration=NULL
20. Query the borrowers table:
SELECT debarred, debarredcomment FROM borrowers WHERE
borrowernumber=<borrower1> OR borrowernumber=<borrower2>;
21. Notice the values are:
debarred= 9999-12-31
debarredcomment= SMS number invalid
22. Repeat step 17 and notice the script outputs:
There are borrowers with failed SMS or email notices
Patron <borrowernumber>: <borrower firstname> <borrower surname> is currently restricted due to having an invalid SMS number. No new restriction applied"
23. Repeat step 16 and notice no new debarment has been added to those
borrowers as they have already been restricted from having a failed SMS
notice.
24. In the Koha home directory run the command:
prove t/db_dependent/Koha/Notices.t
This unit test contains the tests for the new subroutines added to
Koha/Notice/Message.pm which are restrict_patron_when_notice_fails() and
get_failed_notices()
25. All tests should pass
26. Sign off
Sponsored-by: Catalyst IT Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Aleisha Amohia [Tue, 18 Jun 2024 03:29:32 +0000 (03:29 +0000)]
Bug 37109: Don't initialise claims fields when duplicating acquisitions orders
These fields don't exist in the aqorders table and don't need to be
set/passed on.
* claims_count (dropped in Bug 24161)
* claimed_date (dropped in Bug 24161)
* placed_on (no evidence of this field existing in aqorders)
* received_on (no evidence of this field existing in aqorders)
To test:
1. Go to Acquisitions
2. Create a vendor if you don't already have one
3. Create a basket if you don't already have one
4. Add an order to the basket and Save
5. Add another order to the basket, choose "From existing orders
(copy)"
6. Continue through the process and confirm you're able to duplicate the
order as normal
7. Confirm tests still pass t/db_dependent/Koha/Acquisition/Order.t
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Fri, 7 Jun 2024 10:23:38 +0000 (10:23 +0000)]
Bug 28575: Add unit tests
prove t/db_dependent/Circulation.t
Sponsored-by: Rapid City Public Library Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Tue, 11 Jun 2024 10:43:24 +0000 (10:43 +0000)]
Bug 28575: Add a new check-in message for the new syspref
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Fri, 7 Jun 2024 10:23:01 +0000 (10:23 +0000)]
Bug 28575: Stop lost fine refund if fine is older than syspref value
Test plan:
1) Apply patch and reset_all
2) Checkout an item to a patron
3) Mark that item as lost
4) Add a manual invoice for that item's barcode to the patron's account
5) Pay that fine in the Make a payment tab
6) In system preferences, search for NoRefundOnLostFinesPaidAge
7) Set this to -1. I use this value here to avoid needing to go into the database to change the date of the payment we made in step 5. Any fines older than -1 days (i.e. all fines) will be caught by the syspref which is what we want to test)
8) Check in the item
9) The check in message should display "Any lost item fees for this item will remain on the patron's account."
10) Navigate to the Patron's account and confirm that no credit has been added and that the lost fee has therefore not been refunded
11) Run unit test: prove t/db_dependent/Circulation.t
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Fri, 7 Jun 2024 10:22:23 +0000 (10:22 +0000)]
Bug 28575: Add new syspref 'NoRefundOnLostFinesPaidAge'
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 27 Sep 2024 18:31:28 +0000 (18:31 +0000)]
Bug 36766: (QA follow-up) Tidy and use die_on_error over return
Tidy and add exec to atomic update
Fix POD
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Alex Buckley [Fri, 17 May 2024 02:17:55 +0000 (02:17 +0000)]
Bug 36766: Only list the file basename as the SFTP put destination
Sponsored-by: Horowhenua Libraries, Toi Ohomai Institute of Technology, Plant and Food Research Limited, Waitaki District Council, South Taranaki District Council New Zealand Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Alex Buckley [Thu, 9 May 2024 18:14:56 +0000 (06:14 +1200)]
Bug 36766: Make SFTP notice more customisable
SFTP_FAILURE and SFTP_SUCCESSFUL notices can be configured from Notices
and slip tool.
Sponsored-by: Horowhenua Libraries, Toi Ohomai Institute of Technology, Plant and Food Research Limited, Waitaki District Council, South Taranaki District Council New Zealand Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: Horowhenua Libraries, Toi Ohomai Institute of Technology, Plant and Food Research Limited, Waitaki District Council, South Taranaki District Council New Zealand Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 31143: Fix/identify all cases where '0000-00-00' may still remain in the database
This patch identifies date fields in the database (timestamp, datetime, date) that are 0000-00-00 and sets them to NULL
Test plan -
Examples of setting up some 0000-00-00 date fields:
e.g. Borrowers table
update borrowers set dateexpiry="0000-00-00" where borrowernumber=49;
e.g. Items table
update items set datelastseen="0000-00-00" where itemnumber=12;
To identify the cases:
1) Set up some 0000-00-00 date fields
2) Run the misc/maintenance/search_for_data_inconsistencies.pl script
3) Run fix_invalid_dates.pl -v
To fix the cases:
1) Run fix_invalid_dates.pl -c -v
2) Notice the value has changed from 0000-00-00 to NULL
e.g. Borrowers table
select dateexpiry from borrowers where borrowernumber=49;
e.g. Items table
select datelastseen from items where itemnumber=12;
Signed-off-by: Shi Yao Wang <shi-yao.wang@inlibro.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Tue, 6 Aug 2024 09:41:32 +0000 (09:41 +0000)]
Bug 31143: Work around subtracting datetime if date_of_birth undef
To test:
1) Run the following SQL:
update borrowers set dateofbirth = '0000-00-00' where borrowernumber = 45;
2) Access the borrower edit page through staff UI:
http://localhost:8081/cgi-bin/koha/members/memberentry.pl?op=edit_form&destination=circ&borrowernumber=45
3) Notice you get an error
4) Run the script:
perl misc/maintenance/search_for_data_inconsistencies.pl
5) Notice you get an error
6) Apply patch restart plack and repeat -> no errors
This is not perfect but its all I have time for, for now. Follow-ups are welcomed as always.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Shi Yao Wang <shi-yao.wang@inlibro.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Mon, 21 Oct 2024 11:07:15 +0000 (11:07 +0000)]
Bug 36118: (QA follow-up): Make labels translatable
Also move the space+colon from 'Patron notice sent: ' label to ill-request-log.inc template
Adjust status_change.tt 'From' capitalized because for status changed this is now:
$ Status changed: From "New request" to "Requested"
Instead of the previous:
$ Status changed from "New request" to "Requested"
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
projects / koha.git / log