Bug 19003: Add a TestBuilder default for borrowers.login_attempts
Bug 18314 causes t/db/SIP/Message.t to fail (quite often) since
TestBuilder fills login_attempts with a random number. (Note: Only
when FailedLoginAttempts is non-zero.)
Trivial fix: TestBuilder should have a zero default for login_attempts.
Test plan:
Do not yet apply this patch.
Set pref FailedLoginAttempts to say 3.
Run t/db_dependent/SIP/Message.t. Might fail on the password test (CQ).
Apply this patch.
Run t/db_dependent/SIP/Message.t again. Does not fail anymore.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 31 Jul 2017 14:30:00 +0000 (11:30 -0300)]
Bug 17699: Add test descriptions
Test plan:
prove -v t/db_dependent/Koha/Patrons.t
Subtest: renew_account
1..30
ok 1 - 2016-02-29T00:00:00 + 12 months must be 2017-02-28T00:00:00
ok 2 - 2016-02-29T00:00:00 + 12 months must be 2017-02-28T00:00:00
ok 3 - With BorrowerLogs, Koha::Patron->renew_account should have logged
ok 4 - today + 12 months must be 2017-03-31T00:00:00
ok 5 - today + 12 months must be 2017-03-31T00:00:00
ok 6 - Without BorrowerLogs, Koha::Patron->renew_account should not have logged
ok 7 - today + 12 months must be 2017-03-31T00:00:00
ok 8 - today + 12 months must be 2017-03-31T00:00:00
ok 9 - 2016-04-30T00:00:00 + 12 months must be 2017-04-30T00:00:00
ok 10 - 2016-04-30T00:00:00 + 12 months must be 2017-04-30T00:00:00
ok 11 - 2016-10-30T00:00:00 + 12 months must be 2017-10-30T00:00:00
ok 12 - 2016-10-30T00:00:00 + 12 months must be 2017-10-30T00:00:00
ok 13 - With BorrowerLogs, Koha::Patron->renew_account should have logged
ok 14 - today + 12 months must be 2017-11-30T00:00:00
ok 15 - today + 12 months must be 2017-11-30T00:00:00
ok 16 - Without BorrowerLogs, Koha::Patron->renew_account should not have logged
ok 17 - today + 12 months must be 2017-11-30T00:00:00
ok 18 - today + 12 months must be 2017-11-30T00:00:00
ok 19 - 2016-12-30T00:00:00 + 12 months must be 2017-12-30T00:00:00
ok 20 - 2016-12-30T00:00:00 + 12 months must be 2017-12-30T00:00:00
ok 21 - 2017-06-30T00:00:00 + 12 months must be 2018-06-30T00:00:00
ok 22 - 2017-06-30T00:00:00 + 12 months must be 2018-06-30T00:00:00
ok 23 - With BorrowerLogs, Koha::Patron->renew_account should have logged
ok 24 - today + 12 months must be 2018-07-31T00:00:00
ok 25 - today + 12 months must be 2018-07-31T00:00:00
ok 26 - Without BorrowerLogs, Koha::Patron->renew_account should not have logged
ok 27 - today + 12 months must be 2018-07-31T00:00:00
ok 28 - today + 12 months must be 2018-07-31T00:00:00
ok 29 - 2017-08-31T00:00:00 + 12 months must be 2018-08-31T00:00:00
ok 30 - 2017-08-31T00:00:00 + 12 months must be 2018-08-31T00:00:00
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 31 Jul 2017 14:03:37 +0000 (11:03 -0300)]
Bug 17699: Use limit as end_of_month
From DateTime::Duration pod:
""
For positive durations, the "end_of_month" parameter defaults to wrap.
For negative durations, the default is "limit". This should match how
most people "intuitively" expect datetime math to work.
""""
We need end_of_month => limit for positive durations as well.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 31 Jul 2017 14:02:42 +0000 (11:02 -0300)]
Bug 17699: Add more tests to highlight the problem
Add problematic cases to highlight the problem.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 31 Jul 2017 14:18:23 +0000 (11:18 -0300)]
Bug 19009: Fix random failures from Circulation.t
From jenkins output:
Subtest: CanBookBeIssued + Koha::Patron->is_debarred<7c>has_overdues
1..8
not ok 1
[SKIP]
I executed it several times and display the different $error, $alerts and question keys.
GNA and RESTRICTED were sometimes set, which block the issue.
Reading the code it seems that some patron's attributes must be removed to avoid the checkin rejection.
Test plan:
Execute the tests several times and notice that it fails randomly
With this patch they should always pass.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 14 Jun 2017 14:32:30 +0000 (11:32 -0300)]
Bug 18802: Fix Circulation.t if finesMode ne 'production'
If finesMode is not set to production, only 1 fine will be created (the renewal
one will not). This is what assumes the tests.
If set to 'production', the tests will fail because the fines will not
be deleted (because of the DBIx::Class) warning.
Now we mock the value before charging.
prove t/db_dependent/Circulation.t
t/db_dependent/Circulation.t .. 16/95 DBIx::Class::Storage::DBI::select_single(): Query returned more than one row. SQL that returns multiple rows is DEPRECATED for ->find and ->single at t/db_dependent/Circulation.t line 491
t/db_dependent/Circulation.t .. 56/95
# Failed test 'Can auto renew, OPACFineNoRenewals=10, patron has 10'
# at t/db_dependent/Circulation.t line 670.
# got: 'auto_too_much_oweing'
# expected: 'auto_renew'
# Looks like you failed 1 test of 6.
Test plan:
prove t/db_dependent/Circulation.t
should return green whatever the value of finesMode
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 5 Jul 2017 20:38:41 +0000 (17:38 -0300)]
Bug 18851: Tests must be skipped in cardnumber.t if Test::DBIx::Class is not installed
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 5 Jul 2017 20:38:22 +0000 (17:38 -0300)]
Bug 18851: Test::DBIx::Class is not needed in 00-load.t
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 5 Jul 2017 20:37:41 +0000 (17:37 -0300)]
Bug 18851: Database handler must not be created at runtime
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 7 Aug 2017 12:54:27 +0000 (09:54 -0300)]
Bug 19048: (bug 17829 follow-up) Fix regression in self checkout
$patronid is not necessarily set or does not match a valid cardnumber.
These cases must be taken into account to avoid the script to crash and
raise the following error:
Can't call method "unblessed" on an undefined value at
(...)/koha/opac/sco/sco-main.pl line 117
Test plan:
Hit sco/sco-main.pl and confirm that the error is gone with this patch
applied
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is an action_logs entry via logaction() without transaction to be rolled
back in t/db_dependent/Log.t. This leaves an entry in action_logs after
the test is over.
To replicate:
1. prove t/db_dependent/Log.t
2. Observe a new entry in action_logs table
To test:
1. Apply patch
2. prove t/db_dependent/Log.t
3. Observe there are no new entries in action_logs
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Alex Buckley [Fri, 21 Jul 2017 08:47:48 +0000 (08:47 +0000)]
Bug 18987 - Added Koha::Account package pragma to Patron.pm
Test plan:
1. On an up to date branch go to Patrons and try to browse for a patron
by last name
2. Notice that the page processes indefinately
3. Apply patch
4. Repeat step 1
5. Notice the patron results are displayed
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is a trivial fix, but finding the cause for a failing checkin in
SIPServer surely was not.
Without this simple change, I could not checkin an item while the SIP server
just closed the connection and syslog contained nothing useful.
The error can be easily reproduced without this patch by:
use Modern::Perl;
use C4::SIP::ILS::Item;
my $item = C4::SIP::ILS::Item->new('some_barcode');
where some_barcode should refer to an item checked out.
You should trigger the error (with your due date):
2017-07-28 23:59:00 is not an object at line 3.
Why the ILS/Item.pm module still compiles without a warning, is not clear
though.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Mon, 1 May 2017 11:04:07 +0000 (13:04 +0200)]
Bug 15140: Display $i when ind2==8
See MARC specification.
Note that we have a preceding text before all 776s too.
Test plan:
[1] Set field 776 ind2 to 8. And add text in $i.
[2] Look for this text on OPAC detail and staff detail.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Felix Hemme <felix.hemme@thulb.uni-jena.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Thu, 16 Mar 2017 11:37:12 +0000 (12:37 +0100)]
Bug 15140: Add MARC21 776 to OPAC and staff display
Adds code to opac and staff detail XSLT in order to show 776$t (or $a) and
a link based on 776$w (record control number). $w should be in the form:
(MARCOrgCode)Record-number
For instance: (NL-AmRIJ)12345
Note: You should have enabled default opac/intranet XSLT view.
Test plan:
[1] Add two 776s (one with $t and $w and one with $t only)
[2] Verify that you see "Additional physical formats" on opac-detail. Does
the link for $w work?
[3] Check intranet detail too.
[4] Empty 776$t and put text in $a. Check detail page again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Felix Hemme <felix.hemme@thulb.uni-jena.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To replicate:
1. Check the row count of borrowers, branches, categories, sessions, sms_providers
tables
2. prove t/db_dependent/Search/History.t
3. Repeat step 1
4. Observe borrowers the following tables have increased in row count:
- borrowers
- branches
- categories
- sessions
- sms_providers
To test:
1. Before applying the patch, go through steps at "To replicate" plan
2. Apply patch
3. Go through steps at "To replicate" plan
4. Observe step 4 no longer applies and those tables have the same number of
rows as before executing the test.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test t/db_dependent/Auth.t seems to have an ineffective test data cleanup.
Data generated by TestBuilder is left in borrowers, branches, categories,
sms_providers and sessions tables after the test.
To replicate:
1. Check the row count of borrowers, branches and categories tables
2. prove t/db_dependent/Auth.t
3. Repeat step 1
4. Observe borrowers the following tables have increased in row count:
- borrowers
- branches
- categories
- sessions
- sms_providers
To test:
1. Before applying the patch, go through steps at "To replicate" plan
2. Apply patch
3. Go through steps at "To replicate" plan
4. Observe step 4 no longer applies and those tables have the same number of
rows as before executing the test.
This issue has been happening in REST tests as well, and this solution is
directly copy-pasted from t/db_dependent/api/v1/cities.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18977: Rollback branch in t/db_dependent/SIP/Message.t
To test:
1. Before applying patch, check the amount of branches in database
2. prove t/db_dependent/SIP/Message.t
3. See that a new branch is stored
4. Apply patch
5. prove t/db_dependent/SIP/Message.t
6. See that a new branch is no longer stored
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Thu, 20 Jul 2017 16:39:43 +0000 (13:39 -0300)]
Bug 18966: Do not deal with duplicate issue_id on checkin
Koha suffers of big bugs due to its history: When data are deleted, they
are moved to another tables.
For instance issues and old_issues: when a checkin is done, it is moved
to the old_issues table.
That leads to a main problem that is described on
https://wiki.koha-community.org/wiki/DBMS_auto_increment_fix
However we tried first to fix the problem (for issues/old_issues) at
code level on bug 18242.
The goal was to prevent data lost.
Data lost may happens in this case:
Check an item out (issue_id = 1)
Check an item in (issue_id = 1)
Restart MySQL (reset auto increment for issue_id to 1)
Check an item out (issue_id = 1)
Check an item in => BOOM, the issue_id is a PK in old_issues and the
move fails.
Before bug 18242 the data were lost, we inserted the value into
old_issues, which fails silently (because of RaiseError set to 0 in
Koha::Database), then delete the row from issues.
That has been fixed using a transaction.
This patch introduced a regression we tried to fix on bug 18651 comment
0, the patron was charged even if the checkin was rejected.
A good way to fix that would have been to LOCK the tables:
1- Start a transaction
2- LOCK the table to make sure nobody will read id and avoid race
conditions
3- Move the content from one table to the other, dealing with ids
4- UNLOCK the table
5- Commit the transaction
But there were problems using LOCK and DBIx::Class (See commit 905572910b3a - Do no LOCK/UNLOCK the table).
Finally the solution implemented is not acceptable for several reasons:
- batch checkins may fail
- issue_id will always stay out of sync (between issues and old_issues)
See 18651 comment 66.
Since the next stable releases are very soon, and we absolutely need to
fix this problem, I am suggesting to:
1- Execute the move in a transaction to avoid data lost and reject the
checkin if we face IDs dup
=> It will only reject 1 checkin (max is 1 * MySQL restart), no need to
deal with race conditions,
2- Display a warning on the checkin page and link to a
solution/explanation
3- Communicate as much as we can on the proper fix: Update auto
increment values when the DBMS is restarted -
https://wiki.koha-community.org/wiki/DBMS_auto_increment_fix
4- Display a warning on the about page for corrupted data (see bug
18931)
5- Write and make available a maintenance script to fix corrupted data
(TODO LATER)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 24 Jul 2017 20:46:27 +0000 (17:46 -0300)]
Bug 18931: Add items/deleteditems tables
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 12 Jul 2017 18:52:19 +0000 (15:52 -0300)]
Bug 18931: Add a "data corrupted" section on the about page - MySQL AI
See the following wiki page for more information
https://wiki.koha-community.org/wiki/DBMS_auto_increment_fix
Test plan:
Create (at least) a patron, a checkout, a biblio and a hold
Then fill the old_* or deleted* tables with:
INSERT INTO deletedborrowers SELECT * from borrowers WHERE borrowernumber=XXX;
INSERT INTO deletedbiblio SELECT * from biblio WHERE biblionumber=XXX;
INSERT INTO old_issues SELECT * from issues WHERE issue_id=XXX;
INSERT INTO old_reserves SELECT * from reserves WHERE reserve_id=XXX;
Go to the about page, 'System information' tab. You should see a new
"Data problems" section with the list of the ids that are wrong
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 25 Jul 2017 19:49:38 +0000 (16:49 -0300)]
Bug 18982: Create a circ rule for the data we created
No need to have a default circ cule, we create one for the categorycode
and itemtype we are going to use.
The 3 checkouts will not be rejected (5 are allowed)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Fri, 9 Jun 2017 15:50:41 +0000 (15:50 +0000)]
Bug 18545 [Follow-up] Remove use of onclick from OPAC Cart
This patch makes a few corrections:
- Use 'e.preventDefault()' instead of 'return false' in changed
sections.
- Modify the event handler on checkboxes to successfully handle the
un-check action as well as the check action. (QA comment 5).
To test, follow the original test plan.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Aleisha Amohia [Fri, 5 May 2017 03:58:49 +0000 (03:58 +0000)]
Bug 18545: Remove use of onclick from OPAC cart
To test:
1) Apply patch and add one or more items to your cart
2) Confirm that clicking the following things still works as expected:
- more details
- brief display
- send
- download
- print
- select all
- clear all
- selecting by clicking checkbox
- remove title
- add title to list
- place hold
- add tag
- empty and close
Sponsored-by: Catalyst IT
Followed test plan, works as expected. Resolves issue with two
print dialogues from Bug 18544. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Mon, 15 May 2017 08:38:43 +0000 (10:38 +0200)]
Bug 18605: Remove TRUNCATE from C4/HoldsQueue.pm
Replaces TRUNCATE by DELETE, since truncate implicitly commits. We don't
need to do that here. (Would complicate testing it too.)
Fixes typo disablig.
Add a simple test to HoldsQueue.t.
Test plan:
Run t/db_dependent/HoldsQueue.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18955 - autocomplete is on in OPAC password recovery
In OPAC password recovery form autocomplete is not disabled.
So when login or email is entered, it is saved in browser input history for autocomplete.
This is a major issue for OPAC on computers with public access.
This patch adds autocomplete off on forms.
Test :
- Enable system preferences OpacPasswordChange and OpacResetPassword
- Go to OPAC
- Be sure to not be logged in
- Click on "Forgot your password?"
- Enter a loggin and email and Submit
=> Without patch there is an autocompletion with values you entered
=> With patch there is no autocompletion
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Fri, 23 Jun 2017 12:27:19 +0000 (12:27 +0000)]
Bug 18572 - Improper branchcode set during OPAC renewal
To test:
1 - Set 'OpacRenewalBranch' to various settings
2 - Renew an item for a ptron under each setting
3 - Confirm action_log entries reflect the correct branch for each
secnario
4 - prove t/db_dependent/Circulation/issue.t
Signed-off-by: David Kuhn <techservspec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18965 - branch transfer limits pagination save bug
In branch transfer limits, tables are paginated with 20 rows by default.
The bug is that datatable not only hides rows, they are not in form.
So when submitting form, rows not visible are erased.
Test plan :
Wihout patch :
- Create 22 branches, you can hack the creation form by manualling calling URL : /cgi-bin/koha/admin/branches.pl?op=add_validate&branchcode=Bxx&branchname=Bxx
- Go to Administration > Library transfer limits
- You see table first page : only 20 first rows are shown
- You see all checkboxes are checked
- Go to second page of this table
- Save
=> You see table first page with all checkboxes unchecked
With patch the is no pagination, all checkboxes are shown when you save
Signed-off-by: Axelle Clarisse <axelle.clarisse@univ-amu.fr> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add schema calls.
Remove an unneeded AddBiblio call.
Test plan:
Run t/db_dependent/Biblio/Isbd.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Adding schema and caching statements.
Adjust it so that the Koha to MARC mappings are not assumed to be present,
but are created as needed.
Remove the mock on marcflavour. It is no longer needed.
Resolving a small typo.
Test plan:
Run t/db_dependent/Biblio/TransformKohaToMarc.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18951: Some t/Biblio tests are database dependent (git mv)
Move Isbd.t and TransformKohaToMarc.t to db_dependent.
Next patch will add a few adjustments too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 12 Jul 2017 20:24:24 +0000 (17:24 -0300)]
Bug 18826: rollback transaction for api tests
The holds.t tests for the REST api do no rollback properly and modify
the DB (no cleanup).
This comes from a bug caused by SessionStorage = mysql (default)
The error is:
"rollback ineffective with AutoCommit enabled"
Test plan:
select count(*) from borrowers;
prove t/db_dependent/api/v1/holds.t
select count(*) from borrowers;
=> The number of entry must be the same before and after the tests have
been executed
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18971: Typo Koha::ItemsTypes for Koha::ItemTypes
As reported by Nick, a typo from bug 17843.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Fri, 14 Jul 2017 14:15:20 +0000 (14:15 +0000)]
Bug 18942: Internal Server Error symptomatic of using system user
TEST PLAN
---------
1) sudo koha-shell -c bash kohadev
2) prove -v t/Budgets/CanUserUseBudget.t
-- works
3) prove -v t/Budgets/CanUserModifyBudget.t
-- works
4) exit
5) git bz apply 18942
-- interactive just the test patch
6) repeat steps 1-4
-- prove fails (similar message with 919 in comment #0)
7) git bz apply 18942
-- interactive just the actual fix
8) repeat steps 1-4
-- works
9) run koha qa test tools
Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Fri, 14 Jul 2017 14:41:39 +0000 (14:41 +0000)]
Bug 18942: Add test case to prove change
Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Mon, 29 May 2017 08:17:06 +0000 (10:17 +0200)]
Bug 18672: Test for fixing overwriting creation date
Use this test to highlight issue:
prove -v t/db_dependent/Virtualshelves.t
After applying patch for Koha/Virtualshelf.pm it should turn green
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Works correctly according to test case. Passes QA Tools and the
indicated t/db_dependent/Virtualshelves.t unit test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Mon, 29 May 2017 06:56:14 +0000 (08:56 +0200)]
Bug 18672: Fix overwriting creation date with modification date when editing list
To reproduce:
- In staff client, create a new list (if you have not already one)
- In db, update virtualshelves and set field created_on to an earlier date,
something like:
update virtualshelves set created_on = '2017-04-01 02:09:12' where shelfnumber = 1;
- Go to Home > Lists > Your lists
- Verify that the modified creation date for this list appears in staff client
- Edit list in staff client, save
- Verify that creation date is overwritten by modification date (wrong)
To test:
- Apply patch
- Repeat steps above, verify that creation date no longer is overwritten
by modification date
Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Use existing indendation
Marc Véron [Wed, 21 Jun 2017 07:47:13 +0000 (09:47 +0200)]
Bug 18832: Missing space between icon and label in button 'Patron lists'
On page Home > Patrons the button 'Patron lists' misses a space between
icon and text. This patch adds it to make the button display like the other
ones.
To test, apply patch and verify that the button displays as expected.
Signed-off-by: fcouffignal <fcouffignal@gmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18613: Remove letter rule correctly as superlibrarian
TEST PLAN
(reproducing bug)
1 - Set 'IndependantBranches' to enable
2 - Log in as Superlibrarian.
3 - Create 3 rules
- 1 for all librairies (1)
- 1 for the library of the superlibrarian (2)
- 1 for another library (3)
4 - Try to delete them and see them and see that (3) isn't the good one
(checking patch)
5 - Apply patch
6 - Try again 3-
7 - Connect as not superlibrarian
8 - Try again 3-
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18901: [QA Follow-up] Do not translate zzpref either
Adding one backslash makes a difference :)
We need to escape the dot in the regex to exclude a file like zzpref
from translation too. Perfect_regexes++
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Julian Maurice [Thu, 6 Jul 2017 12:39:20 +0000 (14:39 +0200)]
Bug 18901: Sysprefs translation: translate only *.pref files (not *.pref*)
Text editors can create temporary files in this folder and this can
confuse the translator.
For instance, vim can create a file named '.opac.pref.swp' which will
make the translator dies with the following error message:
Can't use string ("b0VIM 8.0") as a HASH ref while "strict refs" in use
at LangInstaller.pm line 248.
Test plan:
1. echo 'Oops' > .../en/modules/admin/preferences/whatever.pref.whatever
2. cd misc/translator && ./translate update fr-FR
3. Verify that you have the error message mentioned above
4. Apply patch
5. cd misc/translator && ./translate update fr-FR
6. No more errors!
Signed-off-by: Frédéric Demians <f.demians@tamil.fr> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This noise is from a failure. This patch expands the delete
to 952$c for the ACQ framework as per comment #5.
TEST PLAN
---------
insert into marc_subfield_structure (tagfield,tagsubfield,liblibrarian, libopac, repeatable, mandatory, kohafield,tab,authorised_value,authtypecode,value_builder,isurl,hidden,frameworkcode,seealso,link,defaultvalue,maxlength) values (952,'c','Shelving location','Shelving location',0,0,'items.location',10,'LOC','','',0,0,'ACQ','','',null,9999);
-- this makes sure you have a pre-existing 952$c ACQ record.
prove t/db_dependent/AuthorisedValues.t
-- should have ugly message like in comment #0
apply patch
prove t/db_dependent/AuthorisedValues.t
-- should be green
run koha qa test tools
Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 13 Mar 2017 20:44:25 +0000 (17:44 -0300)]
Bug 18262: Koha::Biblio - Remove GetBiblioData - part 1
Most of the time C4::Biblio::GetBiblioData is used to retrieve the title
and/or the author of a bibliographic record.
This patch replaces the easy occurrences of GetBiblioData, the ones
where the 2 joins are needed, but only data from biblio and biblioitems
table are.
Test plan:
It will be hard to test everything, I'd suggest a QAer to review this
patch and confirm that the difference occurrences of GetBiblioData have
been correctly replaced by calling Koha::Biblios->find or
$biblio->bibioitem
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 11 Jul 2017 15:24:36 +0000 (12:24 -0300)]
Bug 18880: Fix authentication fallback for external authentications
A regression in commit cfc484b17 / bug #18314 breaks the local
authentication fallback for all external authentications like LDAP, CAS
and Shibboleth.
The regression itself is a logical error as "@return = (0)" is
considered to be "false" when checked with "unless" (line 1814). That's
wrong as "unless" tests the number of elements in a list.
This patch tries to simplify the logic by adding a $passwd_ok and
$check_internal_as_fallback flags to be more verbose and hopefully more
understandable.
The goal here is simply to restore back the same logic as before cfc484b17
Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
C4::Biblio::GetSubscriptionsId can be replaced using
Koha::Biblio->subscriptions
Test plan:
Create a new order for a bibliographic record
Create a new subscription on this biblio
From the basket (acquisition), confirm that you are not able to delete
the order with the biblio ("Can't cancel order and delete catalog record
1 subscription(s) left")
Receive the order
On the parcel page, confirm that you are not able to delete the order
with the biblio
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 5 Jul 2017 13:44:55 +0000 (10:44 -0300)]
Bug 18854: Make sure offset will not be < 0 - protect from DoS
There was a bug that meant a very large offset in the search params
will cause the search script to run forever (or long enough to crash
the machine)
To test
1/ Get ready with sudo top so you can kill the thread before it causes
your machine to OOM
2/ Hit a page like yourdomain.com/cgi-bin/koha/opac-search.pl?q=1&offset=-9999999999999999999
3/ Notice the process runs for a long time
4/ Kill the process
5/ Apply the patch
6/ Hit the page again, notice the it loads (offset is set to zero)
7/ Do the same to search in the staff client
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Chris Cormack [Sun, 25 Jun 2017 05:34:12 +0000 (17:34 +1200)]
Bug 18854 - Protect from DOS
There was a bug that meant a very large offset in the search params
will cause the search script to run forever (or long enough to crash
the machine)
To test
1/ Get ready with sudo top so you can kill the thread before it causes
your machine to OOM
2/ Hit a page like yourdomain.com/cgi-bin/koha/opac-search.pl?q=1&offset=-9999999999999999999
3/ Notice the process runs for a long time
4/ Kill the process
5/ Apply the patch
6/ Hit the page again, notice the it loads (offset is set to zero)
7/ Do the same to search in the staff client
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: changed -2 to 0 in opac-search.pl. Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Tue, 6 Jun 2017 15:50:19 +0000 (15:50 +0000)]
Bug 17639 - Remove white filling inside of Koha logo
This patch modifies the Koha logo SVG file to remove the fill from two
letters. This patch also optimizes the file and converts the text object
to paths for better cross-platform portability.
To test you could:
- Open the file in an editor and confirm that the change is correct
- or -
- Open the file in a browser and use the code inspector to add a
background-color attribute to the top-level <svg> tag. The logo should
appear transparent, with no white fills.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Aleisha Amohia [Tue, 27 Jun 2017 01:40:48 +0000 (01:40 +0000)]
Bug 18858: Prevent warn when deleting a borrower debarment
To test:
1) Look at intranet log
2) Go to delete a debarment on a borrower
3) Notice warn
4) Apply patch
5) Add a new debarment
6) Delete this debarment
7) Notice warn is gone
Sponsored-by: Catalyst IT Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Sat, 29 Apr 2017 19:29:11 +0000 (19:29 +0000)]
Bug 16545 - Make edit link a styled button in item search results
This patch replaces the item search results "edit" link with a dropup
button which offers "Edit item" and "Edit record" links.
To test, apply the patch and perform an item search. Each results should
have an "Edit" menu. Confirm that the menu links work correctly for
items on more than one page.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Sat, 29 Apr 2017 19:36:18 +0000 (19:36 +0000)]
Bug 18542 - Move and style "new field" link in item search form
This patch modifies the item search page JavaScript so that the "New
field" link has a "+" icon and is always placed at the end of the last
row in that section of the form.
To test, apply the patch and open the item search form in the staff
client. In the third section there should be a "+ New field" link at the
end of the first row of fields.
Clicking the "New field" link should clone that row and move the link to
the end of the cloned row.
Behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Fix indentation
Bug 18917: Use font-awesome buttons for CSV profiles
To test:
1) Go to Tools -> CSV profiles
2) Notice old style of links for Edit and Delete
3) Apply patch and refresh page
4) Notice buttons for Edit and Delete
5) Confirm they work as expected
Sponsored-by: Catalyst IT Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18918: Disable CSV option if no CSV profiles exist
To test:
1) Confirm you have no MARC CSV profiles (tools -> csv profiles)
2) Go to Tools -> Export data
3) Select the CSV file format for biblios
4) Notice the CSV profile dropdown shows up but the dropdown is empty
5) Click the Export button, notice Koha breaks
6) Go back and apply the patch, refresh
7) Notice the CSV option is now disabled in the file format menu
8) If you hover over CSV, an appropriate message should show explaining
why it is disabled
9) Create a CSV profile for MARC
10) Go back to Export and you should be able to use CSV now without
problem
Sponsored-by: Catalyst IT Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Tue, 11 Apr 2017 20:09:27 +0000 (16:09 -0400)]
Bug 18367 - Fix untranslatable string from Bug 18264
Restore display of message when no barcode found
To test:
1 - Go to course reserves
2 - Add an item to a course
3 - Try adding an invalid barcode - should get an alert
4 - Try force adding an item with itemnumber:
http://localhost:8081/cgi-bin/koha/course_reserves/add_items.pl?op=lookpup&course_id=11&itemnumber=1234523546
5 - Should recieve an error
Signed-off-by: Frédéric Demians <f.demians@tamil.fr> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
David Kuhn [Sat, 10 Jun 2017 20:08:20 +0000 (13:08 -0700)]
Bug 18775 - The "Password Reset" notice should use the patron's homebranch's email as "from" address
To test:
1. Enable the password recovery feature.
2. In the OPAC, click on "Forgot you password?" link and enter requested information.
3. The email with the password reset link has the Koha Admin Email Address listed as the sender.
4. Apply the patch.
5. Repeat step 2. The email with the password reset link now has the the "from" address set for the patron's home branch listed as the sender.
Signed-off-by: Jessica Freeman <jessicafreeman@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Wed, 24 May 2017 17:51:18 +0000 (17:51 +0000)]
Bug 18667: Show a diff view of SQL reports when converting
This patch reformats the SQL conversion before-and-after view so that it
shows a diff between the two, just as the Manage MARC Import interface
does.
This patch also makes a correction to the JavaScript which is triggered
by the closing of the modal. In Bootstrap 3 "hidden.bs.modal" is the
event name instead of "hidden."
To test, apply the patch and find an SQL report in your reports library
which requires updating.
- Click the "Update SQL" button.
- In the modal window, the "existing" and "updated" SQL should be shown
side-by-side with colored highlighting of the differece.
- Confirm that the "Update" button still works correctly.
- Also confirm that if you open the preview of another report, the
"Close" button hides the modal and updates the contents of the modal
markup. Use your browser's DOM inspector to confirm that <div
class="modal-body"> contains only <div id="loading"> and its contents.
Revision moves inline style attributes to CSS block.
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Wed, 21 Jun 2017 18:57:04 +0000 (18:57 +0000)]
Bug 18847 - Add "Save and continue" option to notice editing
This patch adds an option to "Save and continue editing" when editing
notices. The submit button is now a split button in a floating toolbar.
The secondary action of the split button is "Save and continue editing."
To test, apply the patch and go to Tools -> Notices.
- Open any notice for editing. Verify that the toolbar looks correct and
floats as it should when sections of the form are expanded and the
page scrolls.
- Edit a notice and click the "Save" button. Confirm that you are
redirected to the main Notices page and that your changes were saved.
- Edit a notice and click the "Save and continue editing" menu item.
The page should reload with your updates in place.
Signed-off-by: NickUCKohaCon17 <nicansjr@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Sat, 6 May 2017 09:40:16 +0000 (09:40 +0000)]
Bug 12349: Show card number in detailled suggestion pages
This patch modifies the main suggestion management page to link patron
names to their details rather than with a "mailto:" link.
This patch also includes the following changes:
- A fix for Bug 18154, Show card number in suggestion details view.
- Changes for brevity to labels in the suggestion details & edit view.
- Addition of the datepicker class to date fields in the suggestion edit
view.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
projects / koha.git / log