Bug 8757: longer descriptions for authorised values
In the "suggestions" table, the "lib" and "lib_opac" sizes
has been raised from 80 chars to 200.
The GUI allowing the authorised values creation/update has
been changed accordingly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Jonathan Druart [Tue, 24 Jul 2012 13:39:15 +0000 (15:39 +0200)]
Bug 4321: clean C4::Biblio::GetBiblio and uses
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Colin Campbell [Fri, 29 Jun 2012 17:43:28 +0000 (18:43 +0100)]
Bug 8336 Support Sip Renewal Transaction
Renewals were being rejected for incorrect reasons
Checking was being done against the wrong object
Add more informative messages on failure
Correctly set due_date for renewal response
Avoid crashing the SIPServer because it handles RenewAll
incorrectly
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Ian Walls [Thu, 1 Dec 2011 21:15:04 +0000 (16:15 -0500)]
Bug 6151: Add AllowReturnToBranch system preference
In order to solve the issue of IndependantBranches being incompatible with HomeOrHoldingBranchReturn,
this patch changes the mechanism by which the question "can I return this material here?" is answered. Before,
the conditions were "if IndependantBranches is on, and this branch isn't HomeOrHoldingBranchReturn for the item,
then no, otherwise yes". Now, the question is answered by consulting CanBookBeReturned (new subroutine)
New system preference: AllowReturnToBranch
Possible values:
- anywhere (default for new installs, and for existing systems with IndependantBranches turned off)
- homebranch
- holdingbranch (which is also the issuing branch in all normal circumstances)
- homeorholdingbranch (default for existing systems with IndependantBranches turned on)
New subroutine: CanBookBeReturned
Input: $item hash (from GetItems), and $branchcode
Output: 0 or 1 to indicate "allowed" or not, and an optional message if not allowed. Message is the 'correct' branchcode
to return the material to
To Test:
1. Install patch and new syspref
2. Check that default value of the preference:
- if IndependantBranches was OFF at install time, should be 'anywhere'
- if IndependantBranches was ON at install time, should be 'homeorholdingbranch'
Case: 'anywhere'
1. Checkout a Library A book at Library A. Return at Library A should be successful
2. Repeat step 1, returning to Library B. Return should be successful
3. Checkout a Library A book at Library B. Return to A should be successful
4. Repeat step 3 with Library B and Library C
Case: 'homebranch'
1. Checkout a Library A book at Library A. Return at Library A should be successful
2. Repeat step 1, returning to Library B. Return should FAIL (returning message to return at A)
3. Checkout a Library A book at Library B. Return to Library A should be successful
4. Repeat step 3 with Library B and Library C. Both should FAIL (returning message to return at A)
Case: 'holdingbranch'
1. Checkout a Library A book at Library A. Return at Library A should be successful
2. Repeat step 1, returning to Library B. Return should FAIL (returning message to return at A)
3. Checkout a Library A book at Library B. Return to A should FAIL (returning message to return at B)
4. Repeat step 3 with Library B. Return should be successful
5. Repeat step 3 with Library C. Return should FAIL (returning message to return at B)
Case: 'homeorholdingbranch'
1. Checkout a Library A book at Library A. Return at Library A should be successful
2. Repeat step 1, returning to Library B. Return should FAIL (returning message to return at A)
3. Checkout a Library A book at Library B. Return to A should be successful
4. Repeat step 3 with Library B. Return should be successful
5. Repeat step 3 with Library C. Return should FAIL (returning message to return at A)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Mon, 3 Sep 2012 03:00:32 +0000 (11:00 +0800)]
Bug 8713 - Warning message triggered by clicking Keywords to MARC mapping
In the Koha Administration screen, clicking
Keywords to MARC mapping triggered an uninitialized $op warning
in the koha error logs. Added a "|| q{}" to ensure it is set.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Fridolyn SOMERS [Thu, 9 Aug 2012 10:43:20 +0000 (12:43 +0200)]
Bug 7690: hidelostitems not working in Normal Display
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested by toggling both the hidelostitems preference and the
OpacHiddenItems preference. Both work as expected in the normal
search results display.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Mark Tompsett [Mon, 3 Sep 2012 04:27:58 +0000 (12:27 +0800)]
Bug 8714 - Poorly ordered and triggers warning in marctagstructure.pl
An array boundary check was after a comparison using the array.
By changing the logic which had " and ( $j < $cnt)" to be at the
beginning "( $j < $cnt ) and ", the warning is no longer shown
in the error log.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Jonathan Druart [Wed, 22 Aug 2012 12:12:09 +0000 (14:12 +0200)]
Bug 4491: FIX buildQuery if called with an empty limit
if @limit=('') buildQuery failed
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
All searches that I tried (keyword, indexed, CCL, with limits, without,
etc.) worked fine. There are warnings about uninitialized variables in
the OPAC, but they exist on master as well and therefore should not
block these patches.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Jonathan Druart [Thu, 3 May 2012 12:58:25 +0000 (14:58 +0200)]
Bug 7991: Add itemcallnumber into the serial collection tab
This patch adds a new column containing the itemcallnumber value into
the serial collection tab (opac detail).
930$a for UNIMARC
852$h for others
Signed-off-by: Stephane Delaye <stephane.delaye@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(Added Stephane Delaye's sign off at the same time as mine)
As this view has never worked with MARC21, I am comfortable signing
off on the fact that the patch does not in any way impact the MARC21
display.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Owen Leonard [Thu, 16 Aug 2012 19:19:04 +0000 (15:19 -0400)]
Bug 8617 - Problem with display of comments waiting for moderation in OPAC
This patch addresses on aspect of Bug 8617: The behavior where
live previews of edited comments are displaying on opac-detail
as a duplicate comment. We must pass the review id back to the
script when submitting so that the check for it will evaluate
as true when it should.
This patch also corrects some JavaScript for translatability.
To test, submit a comment on a title and approve it. Return to
the title and edit the comment. When you submit your revised
comment the comment pop-up window should close and your revised
comment should appear on opac-detail as "pending approval."
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 7671 : add a real primary key accountlines_id in accountlines
Signed-off-by: Stéphane Delaune <stephane.delaune@biblibre.com> Signed-off-by: Marc Veron <veron@veron.ch>
NOTE: After applying the patch I got following errors in members/pay.pl:
Global symbol "$writeoff_sth" requires explicit package name
Global symbol "$add_writeoff_sth" requires explicit package name
Added to lines at the begin of members/pay.pl:
our $writeoff_sth;
our $add_writeoff_sth;
Now the patch worked as expected.
However I am not quite sure if signing off is OK in this situation.
Marc
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Colin Campbell [Thu, 13 Sep 2012 09:37:56 +0000 (10:37 +0100)]
bug 8768 correct an error in ItemType.t
The second test in ItemType.t tests that an empty table
returns no rows however as Mock::DBD has no resultset
it fails with an error in DBI It requires that an
empty resultset is defined in Mock::DBD first
This patch adds that mocked empty table
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Colin Campbell [Thu, 13 Sep 2012 09:37:56 +0000 (10:37 +0100)]
bug 8768 correct an error in ItemType.t
The second test in ItemType.t tests that an empty table
returns no rows however as Mock::DBD has no resultset
it fails with an error in DBI It requires that an
empty resultset is defined in Mock::DBD first
This patch adds that mocked empty table
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
David Cook [Wed, 12 Sep 2012 20:31:41 +0000 (06:31 +1000)]
Bug 8764 - Template change "Authors" to "Additional authors" in OPAC
This patch simply changes "Authors" to "Additional authors" in the OPAC. This label describes authors that are added via the MARC 700 fields, which are added or additional authors.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as advertised, and seems to make sense. Only affects the display
when XSLT is not enabled.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
wajasu [Wed, 15 Aug 2012 17:51:28 +0000 (12:51 -0500)]
Bug 8378 - <fine> syntax not working on overdues anymore
Bug 8378 - <fine> syntax broken NFC and charset utf8
NFC normalize enqueued letters and add content-type charset=utf-8
This prevents utf8 codes from causing mysql to truncate the 'content'
from the point of certain codes, when stored in the message_queue table.
This was happenning with the currency symbol generated by
Locale::Currency:Format currency_format routine. NFC normalization
was only done on the attachment content with its content-type
containing "text", as in text/plain.
For emails AND attachments, the charset="utf-8" was added to the
content-type so mail clients would correctly iterate the utf8 codes,
thus preventing mobijake.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Ran through test plan before and after applying patch. Verified
that fine syntax does not work pre-patch and does work post-patch
for both direct emails and emails to the KohaAdminEmailAddress.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 8520 - Authorities summary incorrect on posible duplicate notice
We didn't notice this one with jcamins when we fixed this bug.
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Owen Leonard [Thu, 23 Aug 2012 17:01:02 +0000 (13:01 -0400)]
Bug 8428 - can't save contracts
When I replaced the old calendar widget with the jQueryUI version
we lost a JavaScript function which is required by a couple of
pages: Date_from_syspref. This patch adds the function back
to the calendar include and corrects variables in the two
affected templates to make it work again.
To test:
- create a new contract. Submitting should work properly and
without JavaScript errors.
- Open the serials claims page (serials/claims.pl) and filter
the results by date. Submitting the filter form should
work properly and without JavaScript errors.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Both tests passed.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The superfluous whitespace after the definition of subject
tag $9s is causing an error when carried over into dom config
files so that the authority links fail to index
Also removed the (harmless) trailing space in the equivalent
Unimarc files
A good editor and git can help in not creating excess whitespace
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Marcel de Rooy [Thu, 8 Mar 2012 13:36:42 +0000 (14:36 +0100)]
7675 New script for changing selinux file labels on perl scripts
On some Linux distributions like RedHat, Fedora, CentOS you can use SELinux for enhanced security. Among others, this involves file labeling (security context). In other distributions SELinux can be installed additionally.
The attached script lets you update and restore such labels on the perl scripts in a Koha installation.
July 18, 2012: Added opac/svc.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Kyle M Hall [Thu, 12 Jul 2012 14:48:12 +0000 (10:48 -0400)]
Bug 4173 - Statuses not appearing in the OPAC
For the authorised values LOST and DAMAGED, if an OPAC description
is defined for the given value, display that description in the OPAC
rather than the generic description.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 8743: ZOOM error when merging authority change to biblios
The merge fails and the following errors appear in the log:
[Sun Sep 02 23:38:10 2012] [error] [client 75.149.175.233] ZOOM error 25
"Specified element set name not valid for specified database" (addinfo:
"F") from diag-set 'Bib-1', referer:
http://****/cgi-bin/koha/authorities/authorities.pl?authid=3010
[Sun Sep 02 23:38:11 2012] [error] [client 75.149.175.233] Premature end of
script headers: authorities.pl, referer:
http://****/cgi-bin/koha/authorities/authorities.pl?authid=3010
Test plan:
1) Set dontmerge to "Do"
2) Find an authority that is linked to a bib record.
3) Edit the main entry of the authority.
4) Save the authority record.
5) Notice that you got a nasty error and the bib record was not updated.
6) Apply patch.
7) Edit the main entry of the authority again (you can just set it back
to what it was to start with).
8) Save authority record.
9) Notice that there was no error, and the bib record was updated.
10) Sign off.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Colin Campbell [Tue, 28 Aug 2012 13:34:55 +0000 (14:34 +0100)]
Bug 6976 Close loophole allowing borrowers extra holds via opac
The check that the max number of reserves has
not been reached needs to take account of the fact
that we may have added enouch reserves to
reach the limit while this script is running.
Add a check against the incrementing count
The variable canreserve was only used when looping
through multiple holds but was not being
reinitialized on every iteration
make variable local to loop it is used in and
initialize to zero
Have used perltidy to correct the indention of
the while loop as it was misleading to the reader
Some numeric comparisons were using a string operator
fix them before strange bugs manifest themselves
The loophole manifests thus:
borrowers are only allowed Y holds.
If holds are done individually, it is
obeying that law i.e. X has held Y separate books –
when I tried to do a 6th
book it told me that I could not place a hold.
However, if a borrower checks the catalogue,
gets the intial list up and clicks items on the “results”
box and then clicks “place hold” they can hold more than Y
items Please enter the commit message for your changes. Lines starting
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 8447: Make sure we have enough subfields for broader_headings
Thanks to wajasu for providing the debugging information, as I cannot
seem to duplicate the problem, even seeing where it could come from.
Fix corrects cases where upon save, a software error complaing about
indicators being wrong as a side effect of a poorly autogenerated
biblio/authority record.
Behvior with this fix causes existing bilio data to to be preserved
while linking to the authority via subtag 9.
Signed-off-by: wajasu <matted-34813@mypacks.net> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Colin Campbell [Fri, 27 Apr 2012 17:20:08 +0000 (18:20 +0100)]
Bug 8017 reduce manipulation of GetAllIssues return
GetAllIssues can produce large lists
For performance purposes:
Dont loop over the list without cause
Dont do expensive processing in the loop
Dont needlessly copy the array
Do display formatting in the template
Dont extract the barcode list unless we are producing it
Reduce db calls by using the data to hand
Make the table in the template a bit more readable
where everything was stuffed into one line
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Mark Tompsett [Tue, 11 Sep 2012 16:57:43 +0000 (00:57 +0800)]
Bug 8339 - div id="login" should be id="login_controls" in header.inc
After experiencing what I believe was stale CSS, I have
implemented oleonard's suggested fix which does work. That is:
header.inc change login to login_controls, and in
staff-global.css change the #login to #login_controls.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Julian Maurice [Mon, 13 Aug 2012 14:34:35 +0000 (16:34 +0200)]
Bug 7583 follow-up: Prevent users to cancel receipt if they can't
Disable the link for cancelling instead of displaying an error message
after the click. This is only valid if parent order line is received,
not if it's deleted.
When the user gets his mouse over the disabled link, he gets a message
telling him which order (ordernumber) blocks him so he knows immediately
which receipt to cancel.
Also improve error messages for non technical people
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Julian Maurice [Wed, 8 Aug 2012 09:06:45 +0000 (11:06 +0200)]
Bug 7583: Cancel a receipt
In acqui/parcel.pl, there is now the possibility to cancel a receipt.
In "Already received" table, just click on "Cancel receipt" and the
order line will go back to pending orders.
If it was a partial receipt, order line is merged to its 'parent' line.
Attached items are modified so that they become attached to the merged
order line.
If AcqCreateItem is 'receiving', attached items are deleted.
If an order line was first partially received, and then completed. You
must cancel the 'parent' order line before cancelling the 'child'.
Signed-off-by: Marc Veron <veron@veron.ch>
The patch behaves like expected, and the feature is really helpfull.
Just a tiny remark about the following message:
-------------
Cannot cancel receipt. Possible reasons :
You are trying to cancel the receipt of an order line whose parent order line is already received. Cancel this parent order line and retry.
-------------
Maybe it would be good
- to explain a little bit more why it happend and re-word the message for non technical people (not everybody understands 'parent' the same way)
- prevent the situation to happen (e.g. forbid order lines to be deleted if they are already received) - but that would be in the scope of an other bug, I think.
I think such things could be fixed in the future during the ongoing work for Acquisitions module. Signing off.
Owen Leonard [Fri, 7 Sep 2012 16:12:03 +0000 (12:12 -0400)]
Bug 8598 - No patron image or home library on Files & Statistics tabs
Adding the necessary code for patron image, patron
home library, patron category description, and patron
extended attributes to show in the left-hand sidebar.
Signed-off-by: Melia Meggs <melia@test.bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Jonathan Druart [Wed, 4 Jul 2012 15:02:12 +0000 (17:02 +0200)]
Bug 7986: Export issues for patron
In the circulation page, you can now export (as csv or iso2709) a list
of items which are currently checked out by a borrower.
3 export types:
- iso2709 with items: Export the items list in iso2709 format with item
informations.
- iso2709 without items: Export the items list in iso2709 format without
item informations.
- CSV: Export the items list based on a csv profil.
2 new system preferences:
- DontExportFields: a list of fields not to be export
- CsvProfileForExport: The Csv profile name used for the csv export
Test plan:
- Fill the CsvProfileForExport syspref
- go on the borrower circulation page containing checkouts
- Select one or more items and export them to the 3 different formats.
- check if the result file is what you expected
- Test there is no regression with the export authority
- Test there is no regression using tools/export.pl with the command
line interface
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Colin Campbell [Tue, 11 Sep 2012 17:49:35 +0000 (18:49 +0100)]
Bug 8761 Dont inadvertantly use slices
Assignment to a single element slice is better written
as a scalar - This generates a compile time warning as it
can lead to odd behaviour see perldiag for details
This corrects some cases which were added in a recent
commit
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Owen Leonard [Mon, 14 May 2012 12:51:58 +0000 (08:51 -0400)]
Bug 7500 [FOLLOW-UP, revised][Social networks] Use CSS Sprites for faster page loading
This patch adds a new sprite image for social network links.
The page markup has been modified to accommodate the image-
replacement technique used to display the images.
When testing be sure to clear your cache to load the new CSS.
Revision: Rebased, and unused social network images removed.
Owen Leonard [Wed, 16 May 2012 14:25:41 +0000 (10:25 -0400)]
Bug 7500 [FOLLOW-UP][Missing images] Use CSS Sprites for faster page loading
- Adds shelf browser navigational arrows to the main sprite.
- Removes "caret.gif" (a sort of breadcrumbs separator in the OPAC) and replaces
it with a similar Unicode arrow entity.
- Replaces item-bullet.gif (a custom list bullet used in the Cart) with data URI
encoding the image in the CSS
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bug 3462: Links in authorities should be hyperlinks
Make see also links in both the OPAC and authority module search results
into hyperlinks and not just textual strings.
To test:
1. Do a search for an authority that will bring up a heading with a
see also reference in the staff client and the OPAC.
2. Confirm that the see also references listed in the search results
are now hyperlinks, which work.
Also quiets an unnecessary warning about an uninitialized value.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased 26 July 2012
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on master 1 August 2012
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on master 6 August 2012
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on master 11 September 2012
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch works nicely and is a great improvement.
Tests:
- Checked links for existing and non existing "see alsos" give correct
search results
- Verified links show up for all "see alsos" in a result list
- Verified links are properly linked with the correct names
- Checked logs don't show errors
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 7417: Include see from references in bibliographic searches
This patch adds the Koha::Indexer::RecordNormalizer and
Koha::Indexer::MARC::RecordNormalizer::EmbedSeeFromHeadings packages
to enable the inclusion of alternate forms of headings in bibliographic
searches. When the new syspref IncludeSeeFromInSearches is turned on
(default is off) rebuild_zebra.pl will insert see from headings from
authority records into bibliographic records when indexing, so that a
search on an obsolete term will turn up relevant records.
To test:
1) Enable IncludeSeeFromInSearches
2) Add a heading that has an alternate form to a record (for example,
"Cooking" has the alternate form "Cookery," if you have authority
records from LC)
3) Index the zebraqueue (or reindex if you haven't indexed your system
yet)
4) Confirm that if you search for "Cookery" you get the record you
just modified
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on master 5 August 2012 Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on master 11 September 2012
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Also checked:
- Verified database update works correctly
- Checked system preference and its description
- Checked staff/opac detail pages with feature on/off
- Checked staff/opac search facets
- Downloaded and tested records in various formats
- Tried different searches for 'see from' entries of authorities
- Ran all unit tests
Galen Charlton [Thu, 16 Aug 2012 18:38:32 +0000 (14:38 -0400)]
bug 8649: create a temp directory for Zebra for C4::Search tests
The Zebra test uses Unix-domain sockets, which won't work if
Koha is being installed or tested from an NFS- or SSHFS-mounted
clone. Therefore, create (and clenaup) a temporary directory on
(hopefully) a normal filesytem to run the test.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: wajasu <matted-34813@mypacks.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a unit test for C4::Search in t/db_dependent. In order
to test the functioning of the Zebra search, this patch actually includes
an entire Zebra sandbox, and pre-indexed files, which are stored in
t/db_dependent/data (the configuration files are generated on the fly).
This test depends on Test::Warn, Test::MockModule, and DBD::Mock.
To test:
1) Run the test. There should be no failures, and no warnings.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: wajasu <matted-34813@mypacks.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
One of the ideas behind authority records is that users who search for
one term should have related terms (according to the authority file)
suggested to them. At the moment, Koha doesn't do that. Adding an
authority searching step to regular searches and displaying any
suggestions in a "Did you mean" bar at the top of the results would be
very useful.
This commit adds a Koha::SuggestionEngine class which is in charge of
getting suggestions from individual suggestion engine plugins, which
much be in the Koha::SuggestionEngine::Plugin::* namespace, and extend
Koha::SuggestionEngine::Base. Suggestions are loaded asynchronously
using AJAX, and a link to a page with suggestions is provided for users
with Javascript turned off.
The AuthorityFile suggestion engine plugin looks up the specified search
terms in the authority file and then suggests searches for records using
matching authorities.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased 2 August 2012 and incorporated QA feedback
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan:
- Verified database update added system preference correctly,
pref defaults to OFF
- Verified search results and detail pages in OPAC and staff
still worked the same as before
* for no results
* with results
- Activated system preference and tested various searches
* Searches from simple search
* Searches from advanced search
* Search links in records
- Deactivated Javascript - verified fallback works correctly
Notes:
- Suggested terms can include autorities with no linked records.
- When combining more than one search option using advanced search
this results in "no suggestions" more often. Feature works best
from simple search.
Overall great feature making use of authorities in a user friendly way!
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master 2012-09-10 Signed-off-by: wajasu <matted-34813@mypacks.net>
Kyle M Hall [Tue, 24 Jul 2012 15:23:05 +0000 (11:23 -0400)]
Bug 8431 - Followup - Switch from text input to textarea
Switch the text input to a textarea will make editing larger
borrower attritube values much easier. Since modern browsers
allow for dynamic resizing of textareas, we can keep it small
by default and let the library resize it if neccessary.
Kyle M Hall [Thu, 12 Jul 2012 15:29:10 +0000 (11:29 -0400)]
Bug 8431 - Increase the borrower attribute field size from 64 characters to 255
Some libraries would like to store more verbose data in a borrower attribute field.
This commit increases the maximum length of a borrower attribute from 64 characters
to 255 characters.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Owen Leonard [Thu, 6 Sep 2012 12:27:20 +0000 (08:27 -0400)]
Bug 8644 [OPAC] jQueryUI CSS file should not contain customizations
This patch moves jQueryUI customizations into the main CSS
file for the OPAC. In order to get the corrected
default version of jquery-ui.css I have upgraded all core
jQueryUI files.
Testers should look at examples of each of the various jQueryUI
widgets we use in the OPAC to confirm continued functinality: tabs
and datepickers.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Owen Leonard [Wed, 5 Sep 2012 18:37:32 +0000 (14:37 -0400)]
Bug 8644 [staff client] jQueryUI CSS file should not contain customizations
This patch moves jQueryUI customizations into the main CSS
file for the staff client. In order to get the corrected
default version of jquery-ui.css I have upgraded all core
jQueryUI files.
Testers should look at examples of each of the various jQueryUI
widgets we use in Koha to confirm continued functinality: tabs,
autocomplete, datepickers, and slider (in specify due date popup).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
projects / koha.git / log