Jonathan Druart [Wed, 1 Jun 2022 07:54:25 +0000 (09:54 +0200)]
Bug 30874: Replace categoryname
== Test plan ==
1. Apply all patches
2. Create a new patron in a given category
=> Form show the dropdown with the selected category
3. Edit again
=> Value is kept
4. Edit a category to give it specific values for: messaging prefs,
password strength/length, can be guarantee
5. Edit the patron, change the category, and confirm that the different
limitation are correctly applied.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Fri, 28 Jan 2022 17:14:15 +0000 (17:14 +0000)]
Bug 29971: Remember selections across patron search pages
This patch modifies the patron search results page to enable checkbox
selections to be remembered in the browser's localStorage. This allows
checkbox selections to persist while navigating through multiple pages
of search results or even across multiple different searches.
Once selected, these values can be added to a patron list or submitted
for merging. Selections can be cleared manually and will be
automatically be removed upon logout.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- In the staff interface perform a patron search in the Patrons module
which will return multiple pages of results..
- Check checkboxes next to several patrons.
- After one checkbox is checked the "Add to patron list" button should
be enabled.
- After more than one checkbox is checked the "Merge selected patrons"
button should be enabled.
- A box should appear in the toolbar above the search results, "Patrons
selected: X"
- Navigate to another page of results. Check more checkboxes. The
"Patrons selected" information should be updated.
- Return to the first page of results. Your original selections should
still be checked.
- Test that the correct set of patrons is used when clicking "Merge
selected patrons" or when using "Add to patron list."
- Click the "Clear" button in the selections information box. Checkboxes
should be cleared on every page of results you previously checked.
- The "Add to patron list" and "Merge selected patrons" buttons should
become disabled.
- After making several selections, log out of the staff interface and
log back in, returning to the same patron search. Your selections
should have been forgotten.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Mon, 1 Aug 2022 13:54:42 +0000 (15:54 +0200)]
Bug 29983: Show the column by default but hide if the feature is disabled
Prior to this patch there was a blink, the column was displayed then
hidden if the column was hidden.
Also we could display the column even if the feature was disabled.
Now the column is shown by default, and hidden if the feature is
disabled.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 29983: Display the pretend claim column in overdue.tt
This patch displays the column "Return claims" from the page "moremember.pl" to the page "overdues.pl". Rebase on master.
Test plan:
1) Use a patron with at least 1 item who should be checked out soon
2) Home > Patron > Patron details for [name]
3) Click on the 'Checkout' button down the page to show the full table and notice the "Return Claims" column
4) Now go to Home > Circulation > Overdues
5) Find the patron who has to check out and have a look at the table
6) Apply patch and repeat 4) and 5) -> the "Return Claim" column is now displayed on the table
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 31289: Hide Article requests column in circulation rules when ArticleRequests syspref is disabled
This patch hides the Article requests column in the large circulation
rules table when the ArticleRequests system preference is disabled.
To test:
0) Apply patch
1) With ArticleRequests disabled, go to Administration > Circulation and fines
rules
2) Scroll right in the first table
--> There isn't any mention of article requests in the table
3) Scroll down to see the other tables in the page
--> There are no other article requests tables
4) Enable ArticleRequests in Administration > System preferences
5) Go back to the Circulation and fines rules and refresh the page
6) Scroll right in the first table
--> There should be an article requests yes/no column
7) Scroll down to see the other tables in the page
--> There are other article requests tables, Default open article requests
limit and Default article request fees
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Fridolin Somers [Thu, 11 Feb 2021 10:33:35 +0000 (11:33 +0100)]
Bug 27497: Display Koha version in staff interface home page
Koha current version is very useful in staff interface.
You can find it in 'About' page but home page is the first page you
see. Display it in the lower right-hand side of the page, after
'IntranetmainUserblock' content.
Note that it is not a vertical floating text, it whould conflict with
languages floating bar.
Test plan :
1) Apply patch and update staff client CSS :
https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client
2) Look at staff interface home page and look at lower right-hand side
of the page
Signed-off-by: Michael Adamyk <madamyk@ckls.org> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Sun, 31 Jul 2022 07:16:13 +0000 (09:16 +0200)]
Bug 31264: Curbside pickups - Take CalendarFirstDayOfWeek into account
We need to take the pref CalendarFirstDayOfWeek into account to display
the days on the curbside pickups admin page.
Test plan:
Turn on the CurbsidePickup pref
Set CalendarFirstDayOfWeek to Sunday
Go to the curbside pickups admin page, add new slots, and confirm that
Sunday is displayed first.
Try again with CalendarFirstDayOfWeek set to Monday and Saturday.
Sponsored-by: Association KohaLa - https://koha-fr.org/ Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 30500: Allow patrons to change in transit holds pickup locations
This patch adds a way for patrons to change the pickup location for in
transit holds.
This is done in the OPAC on the holds table.
The feature is controlled by a new system preference:
* OPACInTransitHoldPickupLocationChange
To test:
1. Apply this patches
2. Run:
$ updatedatabase
$ restart_all
=> SUCCESS: system preference added
3. Have an in-transit hold for a known patron
4. Visit the holds table for the patron (OPAC)
=> SUCCESS: Hold in transit, cannot change pickup location
5. Enable the OPACInTransitHoldPickupLocationChange system preference
=> SUCCESS: Descriptive text makes sense and is idiomatic
6. Reload the OPAC page
=> SUCCESS: You can now choose a new pickup location
7. Choose one
=> SUCCESS: It works! Reloaded page pre-selects the new pickup location
8. Switch to the new pickup location library on the staff interface
9. Go to Circulation > Transfers to receive
=> SUCCESS: The hold is there!
10. Scan the hold
=> SUCCESS: Usual workflow follows
11. Sign off :-D
Sponsored-by: Montgomery County Public Libraries Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Montgomery County Public Libraries Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Sat, 30 Jul 2022 21:35:50 +0000 (23:35 +0200)]
Bug 31272: Use TT plugins for pickup library and due date in opac-reserve.pl
Before this patch the date formatting for the due date was done
in the .pl instead of the template and the branchcode would show
instead of the library's name in the list of items when placing
an item level hold in the OPAC.
To test:
* Find or create a record with mulitple items
* Check out one of the items
* Place a record level hold
* Return an item to set to waiting
* Place an item level hold
* Go to the OPAC and start placing an item level hold
* Verify the messages in the item table show the branchcode
* Apply patch
* Only visible change should be the library name replacing the branchcode
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 31249: Use cronlogaction on update_patrons_category.pl
This patch does what the title says.
To test:
1. Run the script
2. Check the action logs
=> FAIL: Boo, no record of the running cronjob
3. Apply this patch
4. Repeat 1-2
=> SUCCESS: Yay!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Liz Rea <liz@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Wed, 13 Jul 2022 06:01:48 +0000 (08:01 +0200)]
Bug 30992: Improve translatability for 'for'
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Wed, 13 Jul 2022 06:01:34 +0000 (08:01 +0200)]
Bug 30992: Improve translatability for Waiting at|On hold
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Fri, 22 Jul 2022 11:36:06 +0000 (11:36 +0000)]
Bug 31220: Pass label batch and ids to label-create-pdf
This patch fixes a malformed link to print selected labels
and fix error:
Can't locate object method "get_attr" via package "-2" (perhaps you forgot to load "-2"?) at /usr/share/koha/intranet/cgi-bin/labels/label-create-pdf.pl line 126.
To test:
1 - Create a new label batch with some items
2 - Select 1 or more
3 - Export selected labels
4 - Download as PDF
5 - It works!
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 22 Jun 2022 14:55:03 +0000 (14:55 +0000)]
Bug 30879: Add option to syspref and update display
To test:
1 - Update ComponentSortField system preference and verify biblionumber is an option
2 - Repeat test plan from 30327 and confirm sorting with biblionumber works
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 22 Jun 2022 14:49:05 +0000 (14:49 +0000)]
Bug 30879: Handle index/sorting for UNIMARC
Same as before, but test with UNIMARC setup
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 22 Jun 2022 14:42:17 +0000 (14:42 +0000)]
Bug 30879: Allow biblionumber as sort option in Elasticsearch
Repeat previous tests with Elasticsearch engine
You will need to reindex and reset mappings to pickup the changes form the file
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 22 Jun 2022 14:37:23 +0000 (14:37 +0000)]
Bug 30879: Add biblionumber as a sorting option in MARC21
This patch updates the Local-Number indexing by adding a zeropad option
to Zebra indexing and adding this to the mapping files
It also updates C4/Search.pm to allow biblionumber as an option
To test:
1 - Apply patches
2 - copy etc/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl to /etc/koha/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl
3 - Restart all, reindex zebra
4 - Browse to: http://localhost:8081/cgi-bin/koha/catalogue/search.pl?idx=kw&q=a&sort_by=biblionumber_dsc&count=20
5 - Confirm records sorted correctly
6 - Browse to http://localhost:8081/cgi-bin/koha/catalogue/search.pl?idx=kw&q=a&sort_by=biblionumber_asc&count=20
7 - Confirm records sorted correctly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 31274: Make sure OPACSuggestionAutoFill is handled as a boolean everywhere
The YAML preference definition defines it as a string ('yes' or 'no' the
possible values). And the opac-suggestions.tt template has one occurence
of the variable being compared to a string.
This patch does:
- fix the template
- fixes opac.pref for 0|1
- adds an atomicupdate that takes care of moving 'yes' and 'no' to their
respective boolean values.
To test:
1. Change the syspref value to enable/disable
2. Check on the DB that the value is wrong:
$ koha-mysql kohadev
> SELECT value FROM systempreferences WHERE variable='OPACSuggestionAutoFill';
=> FAIL: It is either 'yes' or 'no' depending on what you choose.
3. Apply this patch
4. Run:
$ updatedatabase
5. Repeat 2
=> SUCCESS: Values are now 0 or 1
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle Hall [Thu, 21 Jul 2022 17:12:06 +0000 (13:12 -0400)]
Bug 29579: Show saved SQL report ID in database query
When trying to figure out which saved SQL report caused too much load, it's useful to have the report id show in the mysql process list.
This patch adds the saved SQL ID number as a comment line in front
of the SQL before passing it to the database.
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Create a long running query like:
SELECT * FROM borrowers a, borrowers b, borrowers c, borrowers d
4) Connect to the database using koha-mysql
5) Execute "show processlist;"
6) Note the Info column looks something like:
SELECT * FROM borrowers a, borrowers b, borrowers c, borrowers d /* saved_sql.id: 1 */
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Wed, 6 Apr 2022 14:17:46 +0000 (14:17 +0000)]
Bug 30077: (follow-up) Set max width for library drapdown
If you have a library with a very long name the dropdown will expand to
accommodate it. I think this is awkward-looking, so I propose to set a
max width on <select> elements in the header search region.
The patch requires a rebuild of the staff interface CSS:
https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Lucas Gass [Tue, 5 Apr 2022 23:04:33 +0000 (23:04 +0000)]
Bug 30077: (follow-up) retain branch selection
To test:
1. Apply patch, updatedatabase, restart_all
2. Search for the system pref 'IntranetAddMastheadLibraryPulldown'
3. Set it to 'Show'.
4. Go to any page that contains header search box and click on 'Search
the catalog'.
5. To the left of the search bar you should see a dropdown for branches.
6. This should be defaulted to 'All libraries'.
7. In the dropdown choose any branch and do a search and make sure it is
correctly limiting to that branch.
8. Try changing to a different branch and doing another search. It
should correcrly limit to that branch and retain that branch in the
dropdown, just like the OPAC.
9. Try selecting 'All libraries' from the top of the dropdown and make
sure it is correctly searching all branches.
10. Turn on the system pref 'IntranetCatalogSearchPulldown' and make
sure it looks nice with both of those dropdowns and functions when
you use limiters from both dropdowns.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Lucas Gass [Thu, 10 Feb 2022 23:48:13 +0000 (23:48 +0000)]
Bug 30077: Add system preference IntranetAddMastheadLibraryPulldown
To test:
1. Apply patch, updatedatabase, restart_all
2. Search for the system pref 'IntranetAddMastheadLibraryPulldown'
3. Set it to 'Show'.
4. Go to any page that contains header search box and click on 'Search
the catalog'.
5. To the left of the search bar you should see a dropdown for branches.
6. This should be defaulted to 'All libraries'.
7. In the dropdown choose any branch and do a search and make sure it is
correctly limiting to that branch.
8. Try changing to a different branch and doing another search. It
should correcrly limit to that branch BUT it should also default back
to 'All libraries' for the next search.
9. Try selecting 'All libraries' from the top of the dropdown and make
sure it is correctly searching all branches.
10. Turn on the system pref 'IntranetCatalogSearchPulldown' and make
sure it looks nice with both of those dropdowns and functions when
you use limiters from both dropdowns.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 23919: Items search by ISBN variations and ISSN variations
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 23919: Add new system preference SearchWithISSNVariations
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Wed, 8 Jun 2022 17:41:56 +0000 (13:41 -0400)]
Bug 30612: Add accountlines method to Koha::Checkout and Koha::Old::Checkout
It would be very useful to have an accountlines method on checkouts objects. In particular it would make fees related to a checkout available from the checkout objects in overdue notices.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Koha/Account/Line.t
3) prove t/db_dependent/Koha/Checkouts.t
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
MJ Ray [Wed, 3 Mar 2021 17:54:42 +0000 (17:54 +0000)]
Bug 27849: Koha::Token may access undefined C4::Context->userenv
The _add_default_csrf_params internal function accesses
C4::Context->userenv without checking that it has been defined. I think
not all of the potential callers of it declare that they require a
defined userenv, so we should test and provide defaults for required
values if it is not defined, to avoid some "Can't use an undefined value
as a HASH reference" HTTP 500 Internal Server Errors.
To test:
Do anything that requires a form with CSRF token, such as editing your
details. Behaviour should be unchanged. To test the failure case, you
would need some customised code that indirectly generates a CSRF token
before setting the userenv up and I am not sure there is any in released
Koha yet.
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Looks good to me. Working as expected.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Michael Hafen [Fri, 13 Aug 2021 21:52:52 +0000 (15:52 -0600)]
Bug 28864: Have patron card creator use PatronsPerPage
Add pageLength to members/member.tt
Add aLengthMenu and pageLength to
patroncards/add_user_search (common/patron_search.tt).
Add aLengthMenu, pageLength, and iDisplayLength to patroncards/edit-batch
Test plan:
1. Set the PatronsPerPage system preference to any integer other than 20.
2. Go to Tools -> Patron card creator.
3. Start a new Card Batch.
4. Click the 'Add patron(s)' button to open the patron search window.
5. Do a search.
6. Add more than 20 patrons to the batch.
7. Close patron search window.
8. Click the 'Add patron(s)' button to add the selected patrons to the batch.
9. Observe that the table of patrons is has 20 as the default per page setting.
10. Apply patch.
11. Reload the batch.
12. Observe that the per page drop down includes the value of PatronsPerPage
and that value is selected by default.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Mon, 27 Jun 2022 13:20:03 +0000 (15:20 +0200)]
Bug 30964: Add 'restricted' and 'has overdues' on curbside pickup
This patch adds more information about the patron's account on the
curbside pickup list view.
"Patron's account is restricted" if the patron is restricted
"Patron has items overdue" if the patron has overdues
Sponsored-by: Association KohaLa - https://koha-fr.org/ Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle Hall [Fri, 29 Jul 2022 10:53:06 +0000 (06:53 -0400)]
Bug 30984: (QA follow-up) Switch from mediumtext to varchar(255)
My research indeicates that tinytext of less than 40 bytes uses
about the same storage as a varchar(255). Also, using
a TEXT field in a complex query may create a temp table.
varchar fields are also more efficient for sorting on.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle Hall [Fri, 17 Jun 2022 10:59:11 +0000 (06:59 -0400)]
Bug 30984: Action logs should log the cronjob script name that generated the given log
When something is changed by a cronjob, and that entity is logged via action logs, we can know what changed, and that it was via a cronjob, but we cannot necessarily know which cronjob made that change. The closest we can come is to find the action logs for the cronjob module which ran before the change which is by no means reliable assuming the CronLog is even enabled.
We should add a new column to action logs to store the name of the script ran for any action logs where the interface is "cron".
Test plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable all the Log/Logging sysprefs
4) Run some cronjobs that will generate action logs
5) Note the new action_logs column "script" contains the filename of the
cronjob that caused the change.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 30658: (bug 29496 follow-up) CheckMandatorySubfields don't work properly with select field in serials-edit.tt for Supplemental issue
CheckMandatorySubfields use the class "input_marceditor" but in file
serials-edit.tt this class is not set for select input in Supplemental
issue form. In consequence if a select field is set as mandatory, it is
detected as missing even if it is filed and so you can't submit the form
and receive the new supplemantal issue.
Test plan:
1- Create (or find) a subscription for a biblio record and select the
option "Create an item record when receiving this serial"
2- Be sure to have at least one mandatory subfield that is filed with a
select input in the framework used by the biblio record. (ex: 952$a,
952$b or 952$c).
3- From the subscription-detail page click on "Receive"
4- In the lower part--Supplemental issue--fill the suppelemant details,
change the status to "Arrived" and fill the item form that appears.
5- Click on "Save"
6- Check that an error box appear with the message " Form not submitted
because of the following problem(s) 1 mandatory fields empty
(highlighted)" (the number can be different according to the number of
concerned subfields)
7- Apply the patch
8- Repeat step 3 to 5
9- Check that no error appear and that your item has been created
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle Hall [Wed, 6 Apr 2022 12:38:00 +0000 (08:38 -0400)]
Bug 30468: koha-mysql does not honor Koha's timezone setting
If I run a query like "SELECT NOW()" from a koha report, I will get a different answer than if I had run it from koha-mysql.
In Koha, we set the timezone for each database connection.
However, koha-mysql does not do this, so instead we are left using the default timezone of the database.
Test Plan:
1) Set your time zone to something other than the database time zone
2) run "SELECT NOW()" using debian/scripts/koha-mysql
*not* /usr/sbin/koha-mysql
3) Note you get the database timezone's current time
4) Apply this patch
5) Repeat step 2
6) Now you get the correct time!
Signed-off-by: Michal Urban <michalurban177@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Lucas Gass [Fri, 29 Jul 2022 23:41:13 +0000 (23:41 +0000)]
Bug 31269: Define sDefaultContent for DataTables
1. Stage a MARC record for import
2. Once you have one click on 'Manage staged records'
3. You will see an alert that says "Something went wrong when loading the table."
4. If you dismiss that you should see the following error:
DataTables warning: table id=records-table - Requested unknown parameter '' for row 0, column 4. For more information about this error, please see http://datatables.net/tn/4
5. Appy patch
6. Try ssteps 1 & 2 again
7. No DataTable errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Shi Yao Wang [Fri, 27 May 2022 14:52:08 +0000 (10:52 -0400)]
Bug 30028: Fix patron message delete confirmation to be translatable
Make the message deletion confirmation popup translatable. Test plan
uses fr-CA translations.
Test plan:
1) Switch language to french (fr-CA)
If you do not have the translations, go to
misc/translator
then do
./translate install fr-CA
After it is done, go to administration > global system preference >
l18N/L10N then select Français (fr-CA) under language preference.
Refresh then you should be able to switch languages.
2) Add a message to a patron account from your own branch (or make sure AllowAllMessageDeletion is on)
3) Click "Delete" next to the message
--> a confirmation message appears "Are you sure you want to delete this message? This cannot be undone." with options "Cancel" and "OK".
4) Apply the patch
5) Write a translation in misc/translator/po/fr-CA-messages-js.po :
msgid "Are you sure you want to delete this message? This cannot be undone."
msgstr "Êtes-vous sûr de vouloir supprimer ce message? Cette opération est irréversible."
6) Refresh the translations by going to misc/translator and execute ./translate install fr-CA
7) Refresh and click "Delete" again
--> now the confirmation message is "Êtes-vous sûr de vouloir supprimer ce message? Cette opération est irréversible." with options "Cancel" and "OK"
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is because the include statement for catalogue-search-box.inc is in the wrong line in circ-search.inc.
To test:
1) Go to an affected page (circulation-home was the first one I noticed)
2) Try the keyboard shortcuts and notice they are incorrect
3) Apply patch and refresh the page
4) Notice that the keys work properly
Signed-off-by: Andrew <andrewfh@dubcolib.org> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
first two are from sample notices, third from sample creator data
3) apply the patch, repeat 1)
4) repeat 2), verify the strings are present in the translation file
5) translate some of the new strings, install the language,
verify strings are present in the translated files
./translate install fr-CA
check fr-CA/optional/sample_creator_data.yml and
fr-CA/mandatory/sample_notices.yml
There are some 60+ new strings.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Lucas Gass [Thu, 28 Jul 2022 18:18:15 +0000 (18:18 +0000)]
Bug 31251: Use jQuery val() to clear_entry
1. Add some patron attributes that are textarea and some that have an AV category so they are select dropdowns
2. Go to the patron form and add some values to the patron attributes
3. Use the "Clear" button to try and clear the values, doesnt work.
4. Apply patch
5. Try clearing values from patron attributes that are both select dropdowns and textarea. The "Clear" button should work.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the code skip calculating the plugin-related task
codes => class mapping if plugins are entirely disbaled.
To test:
1. Apply the regression tests
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Plugins/BackgroundJob.t
=> FAIL: Tests explode with: Can't call method "GetPlugins" on an
undefined value at... Koha/BackgroundJob.pm line 424.
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Mon, 27 Jun 2022 12:51:45 +0000 (14:51 +0200)]
Bug 30965: Add patron autocomplete search to curbside pickups
Prior to this patch librarians had to know the cardnumber to search for
patron. Now it's possible to search using the default patron
autocomplete search (name, cardnumber, etc.)
Test plan:
Confirm that you can search for a patron without their cardnumber,
select it and create a curbside pickup
Sponsored-by: Association KohaLa - https://koha-fr.org/ Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Mon, 28 Mar 2022 19:21:55 +0000 (19:21 +0000)]
Bug 30389: Switch to Bootstrap tabs on the page for adding orders from MARC file
This patch updates addorderiso2709.tt so that it uses Bootstrap tabs
intead of jQuery.
The patch contains indentation changes, so diff accordingly.
To test apply the patch and go to Acquisitions -> Vendor -> Basket ->
Add to basket -> From a staged file.
- Click "Add orders" next to the staged file you want to use.
- On the "Add orders" page, test that the tabs work correctly.
Signed-off-by: Séverine Queune <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Mon, 20 Dec 2021 14:03:22 +0000 (14:03 +0000)]
Bug 14364: (follow-up) Cleanup duplicate code and adjust notices and prefs
This patch removes a duplicated stanza left form moving routine
Changes the routines to use inbound_library_address
Improves the display if the system preferences
Updates the update file
Moves smaple notice
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Fri, 2 Feb 2018 13:36:02 +0000 (08:36 -0500)]
Bug 14364: Allow automatically canceled expired waiting holds to fill the next hold
Right now, if a library automatically cancels expired waiting holds, a
librarian must still re-checkin an item to trap the next available hold
for that item. It would be better if the next hold was automatically
trapped and the librarians receive an email notification so they can
make any changes to the item if need be ( hold area, hold slip in item,
etc ).
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with one item
4) Place two holds on that record
5) Check in the item and set it to waiting for the first patron
6) Set ReservesMaxPickUpDelay to 1
7) Enable ExpireReservesMaxPickUpDelay
8) Enable ExpireReservesAutoFill
9) Set an email address in ExpireReservesAutoFillEmail
10) Modify the holds waitingdate to be in the past
11) Run misc/cronjobs/holds/cancel_expired_holds.pl
12) Note the hold is now waiting for the next patron
12) Note a waiting hold notification email was sent to that patron
13) Note a hold changed notification email was sent to the library
Signed-off-by: Victoria Faafia <vfaafia29@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 31238: Fix typo in marc_subfields_structure.pl
After bug 29001 one is unable to save authorised value to frameworks
subfields. This is caused by minor typo in marc_subfields_structure.pl.
To test:
1. Edit e.g. default frameworks subfield 952$8
2. Add or change fields authorised value
3. Save your changes
=> note that on subfield listing there is no mention that 952$8 is linked to any authorised value
=> if you edit 952$8 authorised value input is empty
4. Apply this patch.
5. Repeat steps 1.-3.
=> authorised value should now be saved
Sponsored-by: Koha-Suomi Oy Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kevin Carnes [Fri, 3 Dec 2021 09:49:59 +0000 (09:49 +0000)]
Bug 29012: Add default values for blank circulation rules that weren't saved to the database
There are 5 fields that are not set if no value is provided when saving/editing a rule in Administration->Circulation and fines rules
- issuelength
- hardduedate
- unseenrenewalsallowed
- rentaldiscount
- decreaseloanholds
This is problematic because it gives the impression these rules are set as blank, but in reality they don't exist and the rule will fal back to the higher level
To test:
1 - Set a rule for
Patron category: Teacher
Itemtype: All
Hard due date: (Today)
Lona period: 10
2 - Set a rule for
Patron category: Teacher
Itemtype: Books
Hard due date: (leave blank)
Loan period: 10
3 - Expected behaviour is Book item will checkout to teacher for 10 days, all other types will be due yesterday at 25:59:00
4 - Checkout an non-book item type to teacher
5 - Hard due date applies
6 - Checkout a 'book' item type to teacher
7 - Hard due date applies - FAIL
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 30308: Fix bulkmarcimport.pl broken by OAI-PMH:AutoUpdateSets(EmbedItemData)
Test plan:
(A) Reproduce the bug:
A1 In Administration > System preferences > Web services:
- Enable OAI-PMH
- Enable OAI-PMH:AutoUpdateSets
- Enable OAI-PMH:AutoUpdateSetsEmbedItemData
A2 In Tools > Export data > Export bibliographic records, export 1 (one)
biblio record. Be sure that this biblio record has at least one item.
Don't tick "Don't export items".
A3 Delete the exported biblio record, and its items.
A4 In command line, on the server load the exported file:
./bulkmarcimport.pl -b -v -file /path/to/koha.mrc
A5 Retrieve the biblio record in Koha. Note the absence of the item(s). This is
the bug.
(B) Apply the patch
B1 Delete the record (without item) loaded at A4.
B2 In command line, on the server load the exported file:
./bulkmarcimport.pl -b -v -file /path/to/koha.mrc
B2 Retrieve the biblio record in Koha. Note the presence of the item(s).
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Wed, 27 Jul 2022 15:47:18 +0000 (17:47 +0200)]
Bug 31247: Fix OPAC authentication when 2FA is enabled
Silly mistake from bug 28786, the $type should be compared to "opac"
instead of "OPAC", erk!
Test plan:
Turn 2FA on
Set it up for an user
Login at the OPAC
=> Without this patch you keep being redirected to the auth form screen
=> With this patch applied you are able to successfully login
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Wed, 27 Jul 2022 15:52:34 +0000 (17:52 +0200)]
Bug 31247: Add tests
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 22456: (QA follow-up) Consider cancellation requested as cancelled in OPAC
This patch adds a helper method for filtering out cancellation
requested-holds from resultsets, and makes use of it in the OPAC to
filter out those in the current holds tab. Holds history now shows
'Waiting (cancellation requested)' on those.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes checkin process the cancellation requested holds
actually cancel them before moving forward.
To test:
1. Have a waiting hold with a patron generated cancellation request
2. At circulation, check the item in
=> SUCCESS: The workflow follows as if the cancellation requested hold
was already cancelled
=> SUCCESS: The hold is actually cancelled
=> SUCCESS: Not shown in the OPAC anymore
Sponsored-by: Montgomery County Public Libraries Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces a new tab to the 'Holds awaiting pickup' screen
for holds that have cancellation requests. This can be accepted (by
cancelling the hold) or rejected.
To test:
1. Set circulation rules for cancellation requests, allowing them for
certain item type.
2. Have some waiting holds for a patron on an item type that allows
requesting cancellation.
3. Visit 'Holds awaiting pickup'
=> SUCCESS: No holds have cancellation requests
4. In the OPAC, on the user details, notice some holds have the ability
to be requested cancellation.
5. Choose to request cancellation
=> SUCCESS: Request is placed, the button is disabled
6. In 'Holds awaiting pickup' you can see them
7. Play with rejecting/accepting
=> SUCCESS: It works!
8. Things are reflected in the OPAC side
Sponsored-by: Montgomery County Public Libraries Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
projects / koha.git / log