Katrin Fischer [Sat, 6 Apr 2019 13:16:56 +0000 (13:16 +0000)]
Bug 12166: (follow-up) Fix sequence of columns in OPAC
Type and description column headings were switched.
To test:
- Check the table headings of the fines table in the
OPAC fines table match the content
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Sat, 6 Apr 2019 12:11:38 +0000 (12:11 +0000)]
Bug 12166: (follow-up) Remove 'Reserve Charge' from descriptions in accountlines
With the prior 'Hold fee' will be displayed in OPAC and staff, so
the 'Reserve Charge' would just be an untranslatable double up
of information.
To test:
- Make sure you create some Reserve Charges prior to applying this
patch set
- Verify they show in staff and OPAC account
- Apply patch
- Run database update
- Verfy the "Rental Charge - " is gone and old and new entries
match now
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Thu, 4 Apr 2019 15:44:30 +0000 (15:44 +0000)]
Bug 12166: Improve display of Reserve charges in patron account
This patch makes changes to the way hold fees are recorded and displayed
in the OPAC and staff client:
- No English strings should be stored in the accountline description.
- The accounttype code should be used to display what kind of charge it
is.
To test, apply the patch and go to the staff client:
- Configure a patron category to have a hold fee.
- Place one or more holds for a patron in that category.
- On the patron's record, view Accounting -> Make a payment
- There should be a separate column for "Account type" showing "Hold
fee" for the hold charges.
- There should be no "Res" or "Reserve Charge" text in the
description column--just the title.
- Switch to the "Transactions" tab. The display should be similar.
- In the OPAC, log in as a patron who has hold fees on their account.
- View the "your fines" page to confirm that the information is
displayed correctly there as well.
- Place a hold for a patron who incurs hold charges.
- Log in to the self-checkout module as that patron and check out an
item which will fulfill that hold.
- The correct fine information should be saved to accountlines: A "Res"
type with a description consisting only of the title.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Wed, 27 Feb 2019 17:45:47 +0000 (12:45 -0500)]
Bug 20937: Truncate items for print notices when user has an email
To test:
1 - Set PrintNoticesMaxLines to 1
2 - Checkout 2 (or more) items to a patron and make them overdue to trigger a
notice
3 - Make sure the patron has an email
4 - Make sure the notice you are sending is set to 'print' as the type
5 - Run overdue_notices.pl without the 'nomail' option
6 - Find the message and note all items have been added
7 - Apply patch
8 - Clear the message queue
9 - Re-run overdue_notices.pl
10 - Confirm the message now has only 1 item.
11 - Set PrintNoticesMaxLines to 0
12 - Clear the message queue
13 - Re-run overdue_notices.pl
14 - Confirm the message has 2 items as expected
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Sun, 7 Apr 2019 16:25:28 +0000 (16:25 +0000)]
Bug 22075: Fix encoding problem with RIS export in OPAC
When exporting a record with diacritics in RIS
format from the detail page in OPAC the encoding
is not correct and the diacritics appear broken.
This patch fixes it.
To test:
- Find or create a record with some special
chars in your OPAC
- Go to the detail page
- Save as > RIS
- Verify the diacritics are broken in an editor
- Apply patch
- Repeat and verify everything now displays correctly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Mon, 25 Mar 2019 12:55:03 +0000 (12:55 +0000)]
Bug 22541: Invoice adjustments should show invoice number and include link on ordered.pl and spent.pl
To test:
1 - Find a vendor in acquisitions
2 - Click 'receive shipment'
3 - Create an invoice
4 - Click 'Finish receiving'
5 - Add an adjustment that encumbers while open and update adjustments
6 - Go to acqui-home and click on the ordered total for the fund with the adjustment
7 - Note the invoice adjustment shows the invoice id and does not link
8 - Add another invoice and another adjustment, but close the invoice this time
9 - Go to acqui-home and click on the spent total for the fund with the adjustment
10 - Note the invoice adjustment shows the invoice id and does not link
11 - Apply patch
12 - Visit the spent and ordered pages and note the adjustments show invoicenumber and are links
13 - prove -v t/db_dependent/Koha/Acquisition/Invoice/Adjustments.t
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fridolin Somers [Wed, 27 Mar 2019 15:19:29 +0000 (16:19 +0100)]
Bug 22595: Items search is mixing inputs
Items search is using inputs and selects from search form to create an Ajax call.
In this call selects are parsed before inputs.
But a custom search field can be used with authorised values and used after a regular search field.
In this case the "q" param is not ordered like the "name" param.
Test plan :
1) Go to Administration > Item search fields
2) Define a search field with an authorised values category
3) Go to items search
4) Use a regular filter like call number
5) Click on new field
6) Use custom field with an authorised value
7) Perform search
=> Without patch you get wrong resuts, authorised value is used as value for first field
=> You can see this by listening traffic in Firebug, look at params "f" and "q"
8) Check some combinaison of select and input filters
Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Thu, 31 Jan 2019 14:29:45 +0000 (14:29 +0000)]
Bug 22250: Clean up Mana KB integration with serials and reports
This patch makes many changes to templates and JavaScript related to the
integration of Mana with serials reports:
- Many incorrect uses of the raw filter with html
- Corrections to Bootstrap modal markup
- Untranslatable strings moved out of JavaScript
- Removed markup and JavaScript related to reports comments, a feature
which doesn't exist in this version.
New include file: mana/mana-comment-status.inc
This file contains hidden-by-default messages which are shown during
the process of submitting a comment on a subscription.
New include file: mana/mana-share-report.inc
This file contains the "Share report" modal markup formerly in
guided_reports_start.tt
New JavaScript file: mana.js
Previously mana.inc, an include file containing only JavaScript which
didn't include any template processing.
Changed: mana/mana-report-search-result.inc
This include file is now a full template so that jQuery's load()
function can be used to pull its contents into the reports search
modal.
Changed: svc/mana/search
This script was returning json-encoded HTML. Now it returns regular
HTML.
To test you must have Mana configured and enabled. Apply the patch and
go to Reports -> Saved reports.
- Choose New report -> New SQL from Mana. A "Mana search" modal should
appear.
- Perform a search which will return results, e.g. "circulation."
- A "Loading" indicator should appear while the results are being
retrieved. It should disappear when results appear.
- Results should appear in the DataTable with sorting, paging, and
search options.
- In the "Notes" column, notes longer than 200 characters should be
truncated with a "Show more" link. Clicking it should expand the
comment and reveal a "Show less" link in its place.
- Click the "Import" button (previously "Use"). The button icon
should change to a loading indicator.
- When the import is complete you should be redirected to a view of
your new report.
Go to Serials and click the "Search on Mana" link in the sidebar.
- Perform a search for a serial
- Results should appear in a DataTable with sorting, paging, and search
options.
- Sorting by title should ignore articles "a," "an," and "the."
Create a new subscription or edit an existing subscription which will
match a record in Mana.
- On the second step of adding/editing the subscription a message
should appear at the top of the form, "Searching for subscription in
Mana Knowledge Base," with a loading icon.
- When searching has completed a "Show Mana results" link should
appear.
- Clicking the link should trigger a modal showing search results which
match your subscription, displayed in a DataTable with sorting,
paging, and search options.
- The last column of the table should contain "Import" and "Report"
buttons.
- Clicking the "Report" button should trigger a menu. Any existing
comments will be listed as well as a "New comment" item.
- Clicking an existing comment should cause the menu to close and a
"Submitting comment" message to appear. It should be shortly
replaced with a "Your comment has been submitted" message.
- Clicking "New comment" should reveal a comment form.
- It should not be possible to submit an empty comment.
- Clicking the "cancel" link should redisplay the search results.
- Submitting a new comment should trigger a "Submitting comment"
message followed by a "Your comment has been submitted"
message.
- In the table of search results, click the "Import" button
(previously "Use"). The button icon should change to a loading
indicator.
- The modal should close and the data from Mana should be loaded
into the subscription entry form.
View the detail page of a subscription which has saved with Mana data.
- There should be a "Report mistake" button in the toolbar. Clicking
it should reveal a menu of comments like the one you saw previously.
- Clicking an existing comment should cause the menu to close and a
"Submitting comment" message to appear. It should be shortly
replaced with a "Your comment has been submitted" message.
- Clicking "New comment" should reveal a comment form modal.
- It should not be possible to submit an empty comment.
- Clicking the "cancel" link should hide the modal.
- Submitting a new comment should trigger a "Submitting comment"
message followed by a "Your comment has been submitted"
message.
Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Katrin Fischer [Tue, 12 Mar 2019 11:11:45 +0000 (11:11 +0000)]
Bug 19747: Add link to article requests help page
Newer manuals contain information about article requests.
This patch adds the link to the article request section
in the manual.
To test:
- Activate ArticleRequests system preference
- Go to Circulation > Article requests
- Click on Help
- Verify that you end up in the proper section of the manual
Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Wed, 3 Apr 2019 14:59:20 +0000 (15:59 +0100)]
Bug 20912: (QA follow-up) Fix for missed signature failure
We missed a change in calling parameters passed to CalcDateDue in AddRenewal
during the initial QAing. This patch corrects the call and adds a test to catch
regressions.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Magnus Enger [Fri, 5 Apr 2019 08:03:58 +0000 (10:03 +0200)]
Bug 22646: Fix use of PrivacyPolicyURL
To test:
PatronSelfRegistration = Allow
PatronSelfRegistrationDefaultCategory = PT (or some other real category)
GDPR_Policy = Enforced
PrivacyPolicyURL = Some URL
- Go to <opac>/cgi-bin/koha/opac-memberentry.pl and verify that the text "privacy
policy" displays a link to the current page, not the URL in PrivacyPolicyURL
- Go to Administration > System preferences > Patrons > Privacy
- Verify that the descriptions of GDPR_Policy and PrivacyPolicyURL does not
mention that PrivacyPolicyURL needs to be set if GDPR_Policy is set.
- Apply the patch
- Verify that opac-memberentry.pl now links to the URL in PrivacyPolicyURL
- Verify that the syspref descriptions mention the relationship between them
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Bin Wen <bin.wen@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Thu, 14 Mar 2019 13:15:01 +0000 (13:15 +0000)]
Bug 21013: Missing itemtype for checkut makes patron summary print explode
This patch moves retrieval of the item type description from the script
to the template using the ItemTypes template plugin.
To test, apply the patch and locate an item which is checked out to
someone. Modify the database record for that item to remove the item
type (items.itype).
View the print summary for the patron who has that item checked out. The
page should display correctly. Checked-out items which have an item type
should show that item type description correctly.
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Ere Maijala [Fri, 8 Mar 2019 11:27:26 +0000 (13:27 +0200)]
Bug 22295: Make Elasticsearch query builder group multi-term queries
Test plan:
1. Do an advanced search for
Title = new
AND
Title = york
2. Verify that the results match an advanced search for:
Title = new york
3. Verify that tests in t/db_dependent/Koha/SearchEngine/Elasticsearch still pass
Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 22675: Fix SCO behaviour on non-existent barcodes
Bug 21206 replaced GetItem for Koha::Items->find, and introduced this
problem. This patch verifies $item is defined before attempting to use
its methods.
To test:
- Log into SCO
- Type an invalid barcode
=> FAIL: Things explode :-/
- Apply this patch, reload
- Type an invalid barcode
=> SUCCESS: A nice error message is displayed :-D
- Sign off :-D
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Tue, 9 Apr 2019 13:21:08 +0000 (13:21 +0000)]
Bug 22553: Unchecking a subpermission does not uncheck the top level permission
This patch makes a minor change to the set permissions page's JavaScript
so that unchecking a subpermission will uncheck the top level
permission.
To test, apply the patch and open the "Set permissions" page for a
patron.
- Expand a permission with multiple subpermissions.
- Check the top level permission. All subpermissions should be checked.
- Uncheck one of the subpermissions. The top level permission should
now be unchecked.
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Sat, 23 Mar 2019 11:44:53 +0000 (11:44 +0000)]
Bug 22288: Correct item search in batchMod by barcode file
To test:
1 - Have a list of barcodes that exist in your catalog
2 - Go to Tools->Batch item modification
3 - Attempt to modify items using the list
4 - Get an error page
5 - Apply patch
6 - Repeat
7 - Modification should work correctly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Mon, 4 Mar 2019 19:07:22 +0000 (16:07 -0300)]
Bug 22390: Never copy items if original order has been created from a subscription
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Tiny change to the code comment: serial => subscription order
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Thu, 21 Feb 2019 17:48:24 +0000 (14:48 -0300)]
Bug 22390: (bug 15184 follow-up) Use aqorders.subscriptionid instead of biblio.serial
It seems that we made a wrong assumption on bug 15184, see
commit d658cb6f7ecb18845a78d4708ee63ad1126f220f
Bug 15184: Do copy items for not a serial OR if items are created on ordering
To know if an order has been created from a subscription we should check
$order->subscriptionid instead of the $biblio->serial flag
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Tue, 2 Apr 2019 18:02:14 +0000 (18:02 +0000)]
Bug 22618: Move tests to t/db_dependent/Acquisition.t
prove -v t/db_dependent/Acquisition.t
Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Sat, 23 Mar 2019 08:13:13 +0000 (08:13 +0000)]
Bug 22641: Use raw filter on html slip
To test:
Enable SCO
Load a patron
Hit finish, print slip
Note slip shows as raw html
Apply patch
Repeat, get a correctly formatted slip
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=22068
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Mon, 24 Dec 2018 15:59:22 +0000 (15:59 +0000)]
Bug 17978: Unit tests for changes
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Mon, 24 Dec 2018 14:33:51 +0000 (14:33 +0000)]
Bug 17978: Check if hold can be placed before placing on placerequest.pl
To test:
1 - Set an All/All/All rule with reserves limited 2 to
2 - Search in the staff side
3 - Select all records (or more than 2) from the results
4 - Click 'Place hold'
5 - Find a patron, place holds
6 - You get more holds than you should
7 - Delete those holds
8 - Apply patch
9 - Search and select more than 2 records
10 - Find patron, place holds
11 - Only 2 holds are placed
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Kyle M Hall [Tue, 19 Dec 2017 19:20:56 +0000 (14:20 -0500)]
Bug 17978: Circ rules will not limit holds
The crux of this issue is that all those holds are unfilled record level holds. The code that checks for the number of holds the user already has *always* uses a branchcode of some form. Because of this, any open record level holds are completely ignored for this purpose.
Test Plan:
1) Set ReservesControlBranch to "item's home library"
2) Set an All libraries/All Patrons/All itemtypes rules limiting a patron to 2 holds
3) Place 3 record level holds, you can but you should not be able to!
4) Delete the holds
5) Apply this patch
6) Attempt to place 3 record level holds
7) Note that you cannot!
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Jonathan Druart [Thu, 14 Feb 2019 20:03:17 +0000 (17:03 -0300)]
Bug 22068: Prevent patrons to cancel article request they did not create
opac-article-request-cancel.pl doesn't check that the article request to
be cancelled actually belongs to the logged-in borrower. This results in
any logged-in user being able to cancel any article request just by
changing the id in the URL.
Test plan:
- Login with Patron P1, create an article request
- Cancel it
- Create another one
- Copy the cancellation link (must be /cgi-bin/koha/opac-article-request-cancel.pl?id=X)
- Login with Patron P2
- Hit the cancellation link
=> Without this patch the article request is cancelled
=> With this patch applied there is a 404 redirection
Note that the 404 will also appears when the article request id does not
exist.
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Fri, 29 Mar 2019 09:46:12 +0000 (09:46 +0000)]
Bug 22600: Update Tests adding 'interface' as needed
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Thu, 28 Mar 2019 14:32:05 +0000 (14:32 +0000)]
Bug 22600: Set 'commandline' interface appropriately
This patch change Koha::Cron to be a more generic Koha::Script class and
update all commanline driven scripts to use it.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Mon, 25 Mar 2019 19:04:58 +0000 (19:04 +0000)]
Bug 22600: Add 'cron' to interface types and set appropriately
This patch adds 'cron' as a valid interface and sets it appropriately for
existing cron scripts.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Thu, 28 Mar 2019 11:33:00 +0000 (11:33 +0000)]
Bug 22600: Add 'api' to interface types and set appropriately
This patch adds 'api' as a valid interface and sets it appropriately for
both the new REST api and previous /svc/ api's. Handling to keep the
interface of a logged in session is included such that if the OPAC or
Intranet use the API's internally via a Cookie we will maintain the
interface throughout the session.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Thu, 28 Mar 2019 10:00:22 +0000 (10:00 +0000)]
Bug 22600: Add 'interface' to accountlines
This patch adds the 'interface' field to the accountlines table and
updates all Koha::Object routines and calls to use it.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Thu, 14 Mar 2019 12:14:17 +0000 (12:14 +0000)]
Bug 22512: Add status field to accountlines
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Hayley Mapley [Thu, 7 Mar 2019 20:28:48 +0000 (20:28 +0000)]
Bug 21003: Made Edit keywords more consistent in add_items-step2.tt
When adding a course reserve with a barcode that already exists, the
title, breadcrumbs, and legend of the form all specify that the user is
editing, and not adding, the book.
Test plan:
Same as comment 1
Signed-off-by: Devinim <kohadevinim@devinim.com.tr> Signed-off-by: Bin Wen <bin.wen@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Hayley Mapley [Thu, 7 Mar 2019 02:50:12 +0000 (02:50 +0000)]
Bug 21003: Removed warning and changed wording on add_items-step2.tt
When editing an item in a Course Reserve, the page displayed is the same
that is displayed when adding an item to a Course Reserve. This patch
removes the warning 'This course already has this item on reserve' when
the item is being edited, as well as changes the title, breadcrumbs, and
header of the div. This patch also Changes the header of the div to say
'Edit 'book_name' in 'course_name'' instead of 'Add 'book_name' to
'course_name'' when adding items to a course reserve if the item is
already present.
To test:
1) Create a new course in Course Reserves (you will need Course
Reserves enabled in syspref)
2) Add an item by clicking the Add reserves button
3) Click the edit button on the right hand side of the item listing
under the Reserves heading
4) Observe that the warning 'The course already has this item on reserve' appears, and that the title, breadcrumbs and
header of the div all say Add/Reserve
5) Apply the patch
6) Repeat step 3 and observe that the title, breadcrumbs and header of
the div now say Edit
7) Also verify that when adding a reserve with a barcode that does not
yet exist in the course reserves that the warning 'The course already...' is not displayed and that the header of the div says Add
8) Finally verify that when adding a reserve with a barcode that DOES
exist in the course reserves that the warning 'The course already...' IS
displayed and the header of the div says Edit
9) Sign off!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Hayley Mapley [Thu, 14 Mar 2019 03:47:59 +0000 (03:47 +0000)]
Bug 12441: Search.pl conditional checks and displays using same syspref
Script search.pl checks OPACdefaultSortField and OPACdefaultSortOrder, but
shows defaultSortField and defaultSortOrder when using Advanced Search
in the staff client.
Test plan:
Apply the patch and then check that the Advanced Search uses
defaultSortOrder and defaultSortField sysprefs instead of the OPAC
sysprefs in the conditional. Check that sort behaviour in Advanced
Search still functions as expected. (It should do - this doesn't change
what displays, just improves consistency).
Sponsored-by: Catalyst IT Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Fri, 22 Mar 2019 18:16:33 +0000 (18:16 +0000)]
Bug 13782: RSS for news needs a bit of styling
This patch makes a number of updates to the display of news in the OPAC.
I hope that this makes OPAC news nicer/easier to read. It includes style
changes to make the RSS link look better too.
To test, apply the patch and regenerate the OPAC CSS. You should have
multiple active news items. View the OPAC news with varied values of
NewsAuthorDisplay and OpacNewsLibrarySelect.
Test the single news item view. Test with Quotes on and off, and with
OpacMainUserBlock populated or not.
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Fri, 22 Mar 2019 16:43:51 +0000 (16:43 +0000)]
Bug 22568: Replace RSS icon in the OPAC with Font Awesome
This patch removes the RSS icon image (feed-icon-16x16.png) from the
OPAC and replaces it with Font Awesome icons styled to match.
To test, apply the patch and regenerate the OPAC CSS. View the
following pages, confirming that the RSS icon looks correct:
- OPAC home page (RSS news icon)
- Search results page (Subscribe to search)
- Recent comments
- Search history
- Lists -> View list
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Thu, 7 Mar 2019 16:04:25 +0000 (16:04 +0000)]
Bug 22475: Shelving location doesn't appear on tags list view
This patch corrects the tags list view so that shelving location appears
correctly. Previously the template tried to display a variable which was
empty.
To test, apply the patch and locate an title which has both a tag
applied to it and a shelving location defined for one or more items. Go
to Tools -> Tags and click the tag to view titles with that tag. In the
location column of the table the shelving location should appear along
with library and call number.
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 10345: Increment copy number when adding multiple copies.
To test:
1. Add multiple copies of an item with data in the 'Copy number' field. Note that tha data will be identical for all items.
2. Apply patch.
3. Add multiple copies of an item with a positive integer (ie. only digits) in the 'Copy number' field. Note that the copy number is incremented for each item.
4. Add multiple copies of an item with some other type of data in the 'Copy number' field. Note that the copy number field remains unchanged for the added items.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 22620: OPAC description for CCODE in opac-reserve.tt
Bug 20450 added CCODE to opac-reserve.tt using AuthorisedValues TT plugin.
This patch changes the plugin call so that it requests OPAC description.
Test plan :
1) Define a CCODE with staff and OPAC descriptions
2) Apply this collection on an item
3) At OPAC, place an hold on this item
4) Verify the collection display correctly OPAC description and not staff description
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Tue, 26 Mar 2019 14:11:28 +0000 (14:11 +0000)]
Bug 22575: Item type administration uses invalid error class for dialog
This patch modifies the item types administration script so that it
passes a valid message type to the template, where the type is used as a
CSS class. "Error" is a nonexistent dialog class. It should be "alert."
To test, apply the patch and go to Administration -> Item types.
- Try to delete an item type which is in use. The style of the error
dialog should be correct.
- Try to add an item type using a code which already exists. The error
should look correct.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com> Signed-off-by: Bin Wen <bin.wen@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Owen Leonard [Thu, 28 Feb 2019 13:12:59 +0000 (13:12 +0000)]
Bug 22432: Star ratings plugin replacement missing from a couple pages
This patch modifies two templates to conform to the change to the start
ratings plugin: Overdrive search results and RecordedBooks search
results.
On the Overdrive page, the star ratings are now correctly displayed
using the new plugin. On the RecordedBooks page, star ratings code has
been removed because it is unused. RecordedBooks doesn't provide ratings
information in their API.
To test you need credentials for both Overdrive and RecordedBooks. Apply
the patch and enable both services.
- In the OPAC, perform a search that will return results from Overdrive
and RecordedBooks.
- Open the search results for each of those services.
- On the Overdrive search results page, star ratings should appear
correctly (in read-only mode).
- On the RecordedBooks page everything should look the same.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Tue, 2 Apr 2019 00:34:43 +0000 (00:34 +0000)]
Bug 22619: Fix null empty behaviour for new rules
To test:
1 - Go to Admin->Circulation and fines rules
2 - Set All/All rules ot have a limit for Current checkouts allowed (and onsite checkouts allowed)
3 - Select an itemtype to add a new rule
4 - Save without entering any values
5 - Note that new rule displays with the same numebr as the all/all rule
6 - Check the DB, not no lines were added to circulation_rules table
7 - Delete the rule from the staff client
8 - Apply patch
9 - Repeat, note the new rule is unlimited
10 - Run selenium tests
11 - They pass!
12 - Check no rules/itemtypes are added to your system by the tests
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Colin Campbell [Mon, 1 Apr 2019 11:16:51 +0000 (12:16 +0100)]
Bug 22611: Correction for call to get create_item in EDI.pm
There was a typo in the addition of a call to
effective_create_items causing processing to abort after adding
a single copy.
This patch reverts to using the C4::Context call as used for the
first copy created, the intended call to effective_create_items
is a wrapper around that as the field in the basket is guaranteed
to be null (its not set when we call AddBasket). Being consistent
and explicit in what we call should guard against future changes
in dependencies exposing the logic flaw
Added some comments to make logical flow of code clearer
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Julian Maurice [Wed, 27 Sep 2017 13:32:53 +0000 (15:32 +0200)]
Bug 19380: Add transfer informations in ILS-DI GetRecords response
Test plan:
1. Put an item into a 'transfer' state
a. Place a hold on an item in branch A for a patron of branch B
b. Check in this item in branch A and confirm transfer
2. Go to http://opac/cgi-bin/koha/ilsdi.pl?service=GetRecords&id=XXX
where XXX is the biblionumber of the biblio the item belongs to.
3. Verify you have a new <transfer> element inside //record/items/item
that contains <datesent>, <frombranch> and <tobranch>
4. Check in the same item in branch B, so that the item is not flagged
as being transferred
5. Repeat 2
6. Verify that the <transfer> element is not there.
7. prove t/db_dependent/ILSDI_Services.t
Followed test plan, patch worked as described. Also ran QA test tools
and modified files passed
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Fri, 15 Mar 2019 13:43:03 +0000 (13:43 +0000)]
Bug 22518: Add database update 'just in case'
All cases I could find where 'O' was referenced it was referenced
alongside 'FU'.. as such I've written this DB update to case any last
cases of 'O' and update them to 'FU' "just in case"
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Fri, 15 Mar 2019 13:29:00 +0000 (13:29 +0000)]
Bug 22518: Remove references to 'O' accounttype
I went back over 12 years to and still only found "FIXME: What are these
accounttypes" concerning the 'O' type and I couldn't find anywhere where
it was being set.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Lucas Gass [Tue, 26 Mar 2019 11:17:31 +0000 (11:17 +0000)]
Bug 22586: IntranetReportsHomeHTML no longer renders as HTML on reports-home.pl
As of 18.11 the IntranetReportsHomeHTML syspref no longer renders HTML
on report-home.pl. I think this is being filtered wrong in the template.
Test Plan:
1) Edit IntranetReportsHomeHTML, set to "<p>Test</p>"
2) View a report, note that you see the html p tags are displayed
litterly
3) Apply this patch
4) Reload the page
5) Note the p tags are rendered as html
Signed-off-by: George Williams <george@nekls.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fridolin Somers [Wed, 27 Mar 2019 14:37:51 +0000 (15:37 +0100)]
Bug 22596: use raw TT filter in items search with custom field
When items search is with a custom field using authorised values, html TT filter is breaking the JS, it should use raw.
Test plan :
1) Go to Administration > Item search fields
2) Define a search field with an authorised values category
3) Go to items search
4) Use the "New field" link
5) Check use of custom field is OK
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Josef Moravec [Mon, 14 Jan 2019 11:27:32 +0000 (11:27 +0000)]
Bug 22127: Update date accessioned plugin - remove unused routine
Test plan:
1) Apply the patch
2) Have set dateaccessioned plugin to an item subfield (it is set on 952$d by default)
3) Confirm the functionality of this plugin is same as before patch
Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test you do not need to have OverDrive credentials. Apply the patch
and go to System preferences -> Enhanced content -> OverDrive. In the
description of the "OverDriveAuthName" preference, follow the link to
manage "individual branch authnames."
- Confirm that the page looks correct, including the header search
box, page title, and breadcrumbs
- Confirm that the page adjusts well to various browser window sizes.
- Confirm that the DataTable works correctly.
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Julian Maurice [Mon, 23 Mar 2015 12:10:46 +0000 (13:10 +0100)]
Bug 13895: Add API routes for checkouts retrieval and renewal
GET /checkouts?borrowernumber={borrowernumber}
GET /checkouts/{checkout_id}
PUT /checkouts/{checkout_id}
+ unit tests in t/db_dependent/api/v1/checkouts.t
Test plan:
1. Open a browser tab on Koha staff and log in (to create CGISESSID
cookie). You should have permission circulate_remaining_permissions.
2. Go to http://yourlibrary/api/v1/checkouts?borrowernumber=XXX (replace
XXX with a borrowernumber that has checkouts) and check you receive
correct data
3. Go to http://yourlibrary/api/v1/checkouts/YYY (replace YYY with an
existing checkout id) and check you receive correct data
4. Send PUT requests to http://yourlibrary/api/v1/checkouts/YYY until
the maximum number of renewals is reached (you should have a 403
error)
5. Run unit tests in t/db_dependent/api/v1/checkouts.t
Depends on bugs 16699 and 14868
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no> Signed-off-by: Lari Taskula <larit@student.uef.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Josef Moravec [Wed, 27 Mar 2019 08:32:37 +0000 (08:32 +0000)]
Bug 21772: (QA follow-up) Hide .tdlabel class in sco for consistancy with opac-user page.
Test plan:
1) Compare holds table on selfcheckout and opac-user page, you will see
the difference: In self checkout there are labels like Status, Pickup
location, and so on in every table cell.
2) Apply the patch, the label in selfcheckout dissappear
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Agustin Moyano [Tue, 12 Mar 2019 01:57:37 +0000 (22:57 -0300)]
Bug 21772: (follow-up) Included more information on tab label for SCO
Signed-off-by: Sarah Cornell <sbcornell@cityofportsmouth.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Agustin Moyano [Thu, 7 Mar 2019 19:31:55 +0000 (16:31 -0300)]
Bug 21772: (follow-up) Remove redundant variable
Sponsored-by: City of Portsmouth Public Library Signed-off-by: Sarah Cornell <sbcornell@cityofportsmouth.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Agustin Moyano [Thu, 7 Mar 2019 18:58:41 +0000 (15:58 -0300)]
Bug 21772: Add holds and account information to SCO
This patch introduces holds and account information to the SCO page. It
uses the introduced include files that are also used in OPAC
(opac-user.pl and opac-account.pl).
To test:
1) Have a patron that has holds and account lines
2) Enable the SCO module
3) Use the patron's cardnumber to get to its details
=> SUCCESS: New tabs are presented, and they display holds and account
information as expected
4) Sign off :-D
Sponsored-by: City of Portsmouth Public Library Signed-off-by: Sarah Cornell <sbcornell@cityofportsmouth.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Agustin Moyano [Thu, 7 Mar 2019 18:51:46 +0000 (15:51 -0300)]
Bug 21772: Move OPAC holds and account tables into .inc
This patch moves the code to render the account and holds information
for the patron into include files. They are loaded in the opac-user.tt
and opac-account.tt templates respectively.
To test:
1) Have a patron with account lines and holds
2) Notice they are displayed in the patron's detail section in the OPAC
3) Apply this patch
4) Reload the patron's detail page
=> SUCESS: Everything looks the same, no behaviuor or layout change.
5) Sign off
Sponsored-by: City of Portsmouth Public Library Signed-off-by: Sarah Cornell <sbcornell@cityofportsmouth.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Tue, 26 Mar 2019 20:20:29 +0000 (20:20 +0000)]
Bug 19722: Don't show items at job completion if over pref
To test:
1 - Set MaxItemsToDisplayForBatchMod to some number
2 - Modify less items than that
3 - Note they show
a - Note if over 1000 they show in a simple display
4 - Modify more items
5 - Note they do not show and you see a note
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Get a list of itemnumbers or barcodes
2 - Set MaxItemsToProcessForBatchMod to less than this number of items
3 - Attempt to batch edit, you arent allowed
4 - Set MaxItemsToProcessForBatchMod to some hugh number like 60000
5 - Try a list of as many items as possible 30000 was good for me (they
should exist in your system)
6 - Try to batch edit, system will timeout on displaying these items
7 - Apply patch, update database
8 - Set MaxItemsToDisplayForBatchMod to 1000 (default)
9 - Try large file again, should not display items, but allow
modification, wait for this to finish
10 - SetMaxItemsToProcessForBatchMod to 1000 and try large file again
11 - Should be prohibited as before
Owen Leonard [Tue, 19 Mar 2019 16:03:43 +0000 (16:03 +0000)]
Bug 22525: Navigation arrows on the bottom of Cataloging search pages
This patch adds a second set of pagination links to the cataloging
search result page, at the bottom of the first set of search results.
Also added is a horizontal rule after the second set of links in order
to make it clearer that the links are for the search results above.
To test, apply the patch and go to Cataloging. Perform a search which
will return multiple pages of results. Confirm that the links work
correctly.
Signed-off-by: Marjorie <marjorie.barry-vila@collecto.ca> Signed-off-by: Bin Wen <bin.wen@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Julian Maurice [Wed, 13 Mar 2019 13:19:44 +0000 (14:19 +0100)]
Bug 22505: Add column configuration to patron list table
Test plan:
1. Create a list of patrons
2. Add some patrons to this list
3. Go to this patron list
(/cgi-bin/koha/patron_lists/list.pl?patron_list_id=XXX)
4. Verify that you can show/hide all columns except the one containing
the checkbox
5. Verify that you can export the table data using the Export menu
6. Go to admin/columns_settings.pl, and verify that the configuration
works for table 'patron-list-table'
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Fri, 15 Mar 2019 08:43:12 +0000 (08:43 +0000)]
Bug 22516: Database update
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Martin Renvoize [Fri, 15 Mar 2019 08:38:17 +0000 (08:38 +0000)]
Bug 22516: Remove remaining calls to lastincrement
A few places still set lastincrement and the tests still checked for
correct values. But nowhere in the code still uses lastincrement for
anything meaningful.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Thu, 15 Mar 2018 12:53:13 +0000 (12:53 +0000)]
Bug 18213: (follow-up) Correctly sort facets
Previously we sorted alphabetically - that works for 1-9.
With a 10th facet category we should sort numerically
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Fri, 7 Jul 2017 10:44:57 +0000 (10:44 +0000)]
Bug 18213: Add Template plugin and fix for C4/Languages
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Thu, 6 Jul 2017 09:41:31 +0000 (09:41 +0000)]
Bug 18213: DB Update (facet order)
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Nick Clemens [Wed, 5 Jul 2017 12:11:35 +0000 (12:11 +0000)]
Bug 18213: Add language facets to Elasticsearch
This patch add language as a facet to ES results - it adds
a new template plugin for languages to get the appropriate
description given an iso 639-2 code
To test:
1 - Make sure you have records with differing languages (in the MARC21 008
field characters 35-37 or UNIMARC 101a)
2 - Apply patch
3 - Reload Elasticsearch settings:
http://localhost:8081/cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
4 - Reindex your records
5 - Search for a phrase that will return results in several languages
6 - Verify you see factes correctly labelled for 'Language'
7 - Verify the facets work
8 - Verify both opac and staff results
9 - prove t/db_dependent/Languages.t
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
projects / koha.git / log