Signed-off-by: Chris <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 13406: Removing depricated code included in PDF::Reuse
1. Upgrade PDF::Reuse to 0.35_04. [1]
2. Run Koha's non-DB dependent test suite. You should notice some non-fatal warnings about
the redefinition of one or two subs in PDF::Reuse. This should not affect the
functionality of the tools for the end user.
3. Verify the functionality of the related tools.
4. Apply the attached patch.
5. Re-run Koha's non-DB dependent test suite. You should note no warnings related to PDF::Reuse.
6. Re-verify the functionality of the related tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Chris <chris@bigballofwax.co.nz>
http://bugs.koha-community.org/show_bug.cgi?id=13407
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Mason James <mtj@kohaaloha.com>
Kyle M Hall [Tue, 29 Jul 2014 16:39:15 +0000 (12:39 -0400)]
Bug 11872 - Lost overdue items should not generate fines
An item can be marked as lost by longoverdue.pl, but left checked out to
the patron. In this case, the item will continue to accrue fines.
Test Plan:
1) Check out an item and back date it so it is overdue and should
generate fines.
2) Mark the item as lost by either using longoverdue.pl, or just
by setting itemlost to 1 by directly accessing the database
3) Run fines.pl
4) Note the overdue generated a fine
5) Repeat steps 1-2
6) Apply this patch
7) Run fines.pl
8) Note a fine was not generated
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Mason James <mtj@kohaaloha.com>
Katrin Fischer [Sat, 27 Dec 2014 11:58:52 +0000 (12:58 +0100)]
Bug 13459: Fix datatables paging for admin > itemtypes
To test:
- Go to administration > itemtypes
- Verify the display of the paging options is broken
- Apply patch
- Verify the display is now correct and works nicely
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Mason James <mtj@kohaaloha.com>
Katrin Fischer [Sat, 27 Dec 2014 20:13:58 +0000 (21:13 +0100)]
Bug 13459: Fix datatables paging for patron lists
The display of the datatables paging options for the
patron list feature is broken.
To test:
- Go to tools > patron lists
- The paging for the 'list of lists' is broken
- Select a patron list 'Add more patrons'
- Notice the paging on this page is also broken
- Apply patch
- Verify both pages now display the paging correctly
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Mason James <mtj@kohaaloha.com>
Jonathan Druart [Wed, 31 Dec 2014 12:23:06 +0000 (13:23 +0100)]
Bug 13504: Remove the '----' marker for CHECKIN and CHECKOUT notices
If only 1 item exist in the message, the marker is not removed.
This marker is removed by render_metadata, but this method is only
called on appending.
Test plan:
1/ Enable the CHECKIN and/or CHECKOUT notices for a patron
2/ check and item in or out and verify that the marker is no longer
displayed in the generated notices.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 13167 Stage MARC for Import hangs for biblio containing invalid ISBN-13
If the ISBN of a UNIMARC record begins with 979 then the 'Stage MARC for
import' hangs. If I use the same UNIMARC record and change 979 to 978 in the
ISBN, 'Stage MARC for import' works perfectly.
The patch deals with the fact that converting an ISBN-13 to ISBN-10 with
Business::ISBN as_isbn10() method fails if the ISBN doesn't begin with 978.
TEST PLAN:
(1) Download, and decompress the ZIP file attached to BZ.
(2) On a UNIMARC Koha instance, go in Tools > Stage MARC for import.
(3) Choose the MARC file containing the record with an ISBN begining with 979.
Click on Upload file, then Stage to import.
(4) The Job progress bar stay at 0%.
(5) Apply the patch. Repeat steps 2-3. The upload works.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Tested in a UNIMARC installation, confirmed that the patch fixes the
problem.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Mason James <mtj@kohaaloha.com>
Marcel de Rooy [Tue, 26 Aug 2014 09:14:33 +0000 (11:14 +0200)]
Bug 12823: Alert about defining the SRU search field mappings
This is a follow-up for report 6536 (SRU search targets).
It will alert a user that saves a SRU server without field mappings.
Test plan:
Add a Z39.50 server. No confirm message.
Add a SRU server without field mappings. Cancel the confirm.
Add one field mapping. No confirm message.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Marcel de Rooy [Tue, 26 Aug 2014 08:31:29 +0000 (10:31 +0200)]
Bug 12823: Add some hints for Host and Database
When adding or editing a SRU server, this patch adds a hint, positioned
under the Hostname field.
It also moves similar information for SRU options and XSLT into hints.
Test plan:
Add/Edit SRU server. Look at Hostname, SRU options and XSLT.
Add/Edit Z39.50 server. No hints for Hostname and SRU options.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Mason James <mtj@kohaaloha.com>
Chris Cormack [Tue, 30 Dec 2014 21:20:59 +0000 (10:20 +1300)]
Bug 13502: Code introcduced in 1861 wrongly assumes a null userid is unique
To test
1/ Create a borrower with '' as their userid, you may have to edit a
row in the db to do this
2/ Run perl t/db_dependent/Circulation/CheckIfIssuedToPatron.t
3/ Notice some tests fail and you see
DBD::mysql::st execute failed: Duplicate entry '' for key 'userid'
at /home/chrisc/git/catalyst-koha/C4/SQLHelper.pm line 184.
4/ Apply the patch
5/ Run the tests again, notice they now pass
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Mason James <mtj@kohaaloha.com>
Owen Leonard [Wed, 10 Dec 2014 14:02:57 +0000 (09:02 -0500)]
Bug 13341 - Hard-coded "Preview" text in OPAC openlibrary.js
The OpenLibrary JavaScript includes an untranslated string, "Preview."
This patch move the string to the template so that it can be translated.
To test, apply the patch and test that the translator picks up the
string:
1. From misc/translator run 'perl translate update [lang]' (e.g. de-DE)
2. Edit misc/translator/po/[lang]-opac-bootstrap.po and add a
translation for the updated "Preview" string
3. Remove the "#, fuzzy" marker from that entry
4. From misc/translator run 'perl translate install [lang]'
5. Enable the [lang] translation for the OPAC in system preferences
6. Enable the OpenLibraryCovers system preference.
7. In the OPAC switch to the [lang] translation.
7. View the detail page for a title for which there is an OpenLibrary
cover image. Below it you should see a preview link with the
translated string you added in step 2.
Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Mason James <mtj@kohaaloha.com>
Lyon3 Team [Fri, 5 Dec 2014 08:27:02 +0000 (09:27 +0100)]
Bug 12895 repair dropbox mode
One day late patrons were restricted even with dropbox mode activated
1) Check in the calendar (Tools/Calendar), that the
previous days you are about to use as date due are
really entered as opening day (never know).
2) Add a suspension in the suspension days parameter
of the circulation rules (Administration/Circulation
and fine rules) to the MOST specific category of
borrower and MOST specific type of document among the
existing rules of the LOGGED IN Site(cf explications
in the circ-rules page).
3) Choose a borrower using the search by category and an
item through the advanced search using the limit by type.
4) Checkout the item selecting the previous opening date
in the Specify-due-date box.
5) Click on Circulation in the upper menu, then on Checkin
and check the Book drop mode. The Book drop date showed
should be the previous opening date.
6) Check in the item : you can see that the patron is restricted
7) apply the patch
8) Redo 1 to 5 : Now, you can see that the patron is not restricted.
9) If you redo the test with two day late, you will see that
the patron is not restricted : that's ok because his
restriction of one day is already finished.
10) If you redo the test with more than two day late, you see
that the patron restriction is, as expected, one day shorter
than it were if the item had been returned without dropbox mode.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Mason James <mtj@kohaaloha.com>
Martin Renvoize [Fri, 12 Dec 2014 12:18:47 +0000 (12:18 +0000)]
BUG 13447: Fixed HTML Email Reports
A tiny typo made in runreport.pl when updating it for bug 9530 lead to
no body being attached to html emails.
Signed-off-by: Chris <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Mason James <mtj@kohaaloha.com>
Jonathan Druart [Fri, 26 Dec 2014 09:22:34 +0000 (10:22 +0100)]
Bug 13458: Display the correct patron categories
Bug 9811 removes useful code.
Actually the AddPatronLists pref is not sent to the template from
members/member.pl.
To fix this issue, we can use the existing not clean way, or compare the
syspref value directly in the template. This second solution is
implemented in this patch.
Test plan:
1/ Set the AddPatronLists pref to 'specific'
2/ On the patron home page (members/members-home/pl), the patron search
result page (members/member.pl after launching a search) and on the
checkouts page/patron search result (circ/circulation.pl after searching
a patron using the check out), verify that the patron category list is
the specific ones.
3/ Test there are no regression with the AddPatronLists pref set to
'general'.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described and fixes the problem.
Note: I am not sure if AddPatronLists makes sense -
if you set it to general patron types, it still preselects the
wrong category type (tried organization, a child patron category
was selected). Also the name is confusiong nowadays with the
Patron list feature. Signed-off-by: Mason James <mtj@kohaaloha.com>
Kyle M Hall [Tue, 21 Oct 2014 10:18:29 +0000 (06:18 -0400)]
Bug 13124 - Record titles with parentheses causing label weirdness
Test Plan ( using sample data included with Koha )
1) Catalog a record and item with the title "Oh no! or, (How my
science project destroyed the world) /"
2) Edit the DEFAULT template
a) Set layout type to Biblio
b) Set data fields to "title, author, isbn, issn, itemtype,
barcode, itemcallnumber"
c) Set font size to 10
3) Create a batch with just the one item you created
4) Export the PDF with the Avery template and the DEFAULT layout
5) Note the weirdness
6) Apply this patch
7) Re-export the PDF, note it's no longer weird ; )
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Mason James <mtj@kohaaloha.com>
Jonathan Druart [Thu, 27 Nov 2014 15:54:21 +0000 (16:54 +0100)]
Bug 13360: C4::Ris assumes that hash keys are ordered - KW
This patch only fixes the KW order.
Test plan:
1/ Choose/create a record with several 6XX (for KW), see the code source
to know which fields you can use
2/ Export this record in RIS format
3/ Verify that the KW lines are ordered following the marc record fields
order.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
We really should refactor this whole thing into Koha::RIS sometime, it's
a horrible module at the moment.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Mason James <mtj@kohaaloha.com>
Mark Tompsett [Fri, 12 Dec 2014 17:28:11 +0000 (12:28 -0500)]
Bug 13453: Koha.t daily quote tests assume sample data
By adding quotes 3 and 25 from the sample data, this test can
pass without having the sample quote data loaded.
TEST PLAN
---------
1) Ensure there is no quote id=3 or that it is NOT
Abraham Lincoln.
2) prove t/db_dependent/Koha.t
-- this should fail the daily quote test.
3) apply patch
4) prove t/db_dependent/Koha.t
-- this should *NOT* fail the daily quote test.
5) run koha qa test tools
Followed test plan 1)-4). Without patch, daily quote test failed. With patch, test passed OK. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, leaves actual data unchanged. Signed-off-by: Mason James <mtj@kohaaloha.com>
This patch updates the image replacement technique used for Koha's login
page. The old technique used a negative text-indent value to move the
text offscreen, but that begins to fail more and more often as screens
get larger.
The new technqiue is described here:
http://www.zeldman.com/2012/03/01/replacing-the-9999px-hack-new-image-replacement/
Note: This patch has not been tested in any Internet Explorer version!
To test you must have a screen which is wider than 2000 pixels. Apply
the patch, clear your browser cache and view the staff client login
page. The logo on the login form should look correct with no
corresponding text appearing anywhere on the screen.
Signed-off-by: Christopher Brannon <cbrannon@debian.localdomain> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Mason James <mtj@kohaaloha.com>
David Cook [Tue, 16 Dec 2014 01:53:18 +0000 (12:53 +1100)]
Bug 13469 - Unapi path to XSLTs is wrong in OPAC
The Unapi path to XSLTs is wrong in the OPAC.
Unfortunately, it's coded to work just for Git installs, which makes it
tough to test.
_TEST PLAN_
Before applying:
1) Go to
http://GIT-INSTALL/cgi-bin/koha/unapi?id=koha:biblionumber:1&format=oai_dc
2) If the biblionumber exists, it should show you the record in OAI_DC format.
3) Go to
http://REGULAR-INSTALL/cgi-bin/koha/unapi?id=koha:biblionumber:1&format=oai_dc
4) You should get a software error
Apply the patch.
After applying:
1) Refresh the page for
http://yourgitinstall/cgi-bin/koha/unapi?id=koha:biblionumber:1&format=oai_dc
2) It should work exactly the same as before.
Thorough testers:
1) Push the code to that regular test install
2) Try the link again. It will properly show the converted record now.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified that single install
intrahtdocs==/usr/share/koha/clone1712/intranet/htdocs/intranet-tmpl plus
"/prog/en/xslt/" is the location for the required xslt files.
Script unapi in git install is still fine.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Mason James <mtj@kohaaloha.com>
Owen Leonard [Wed, 3 Dec 2014 14:22:11 +0000 (09:22 -0500)]
Bug 12428 [3.16.x] "OPAC info" is not displayed in the OPAC
This patch changes the footer include, adding an alias for the jQueryUI
tooltip function to prevent conflict with Bootstrap's function of the
same name.
To test, you must have at least two libraries configured with "OPAC
info" for display in the OPAC.
Modify the holdings of a title so that there is at least one item which
has different holding and home branches matching your library configured
above.
View the detail page for that record. Hovering your cursor over the
library name in the "Location" column should display the branch
information you configured for that library in a tooltip.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Mason James <mtj@kohaaloha.com>
Jonathan Druart [Wed, 10 Dec 2014 15:15:26 +0000 (16:15 +0100)]
Bug 13296: (follow-up) permit grep on AUTHUNIMARC
I would prefer not to hide this "stuff".
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Mason James <mtj@kohaaloha.com>
Fridolin Somers [Wed, 19 Nov 2014 10:56:54 +0000 (11:56 +0100)]
Bug 13296 - error when using z3950 with UNIMARC authorities
When using a z3950 connexion with UNIMARC authorities, you get an error :
Unsupported UNIMARC character encoding [ ] for XML output for UNIMARCAUTH; 100$a -> 20141119
I've seen thant Bug 2060 when adds authorities import adds a special behavior for UNIMARC : marc flavor must be UNIMARCAUTH instead of just UNIMARC.
This patch adds the same behavior when using z3950 connexion and import.
Test plan :
- Use a UNIMARC install
- Define a z3950 connexion for UNIMARC authorities
- Go to Authorities module
- Click on "New from Z39.50"
- Perform a search
=> Without patch : you get the error
=> With patch : you get results
- Import one result
=> You get the authoritie creation form with all datas
You may check same plan with MARC21 install
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
NOTE: depending on the target, the syntax in the configuration
might not be UNIMARC, but MARC21/USMARC instead! Signed-off-by: Mason James <mtj@kohaaloha.com>
Jonathan Druart [Thu, 11 Sep 2014 13:22:44 +0000 (15:22 +0200)]
Bug 7372: (follow-up) does execute this DB entry twice
Since this enh has been backported on 3.14, this patch should be applied
on 3.16 and master branch in order to update the updatedb entry.
It should not be executed twice otherwise the process is stuck on this
entry.
Chris Cormack [Tue, 9 Dec 2014 23:47:30 +0000 (12:47 +1300)]
Bug 13425 - XSS in intranet facets - Patch for 3.18 and master
To Test
1/ Craft a url like /cgi-bin/koha/catalogue/search.pl?q=smith&sort_by='"><script>prompt('Happy_Holidays')</script>
It is important it must return results and facets
2/ Notice the js is executed
3/ Apply the patch test again
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
No prompts, no functional regressions found.
Checked selecting and undoing facets, show more links and paging. Signed-off-by: Mason James <mtj@kohaaloha.com>
Robin Sheat [Fri, 29 Aug 2014 04:19:22 +0000 (16:19 +1200)]
Bug 12849 - fix URLs in sent lists
This brings back the http(s) to the URLs in sent lists.
Test plan:
* make a list
* send it to yourself
* see that the URLs aren't clickable
* apply the patch
* repeat, except now the URLs are better
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
By removing this bit of code, the code in Auth.pm is used
instead. The code there is not perfect, but the solution
works and both list and cart use the same code.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Fri, 5 Sep 2014 15:40:05 +0000 (17:40 +0200)]
Bug 12876: Improve unit tests for CanReserveBeCanceledFromOpac
This patch fix the subroutine name and add a restriction on the
arguments: both argument are mandatory!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Conflicts:
t/db_dependent/Reserves.t
Bug 12876 - Reserve in waiting/transfer status may be cancelled by user
User may cancel his own reservation at waiting or in transit status
through calling opac-modrequest.pl. Cancel button is disabled in
interface but possibility to cancel should be checked also in
opac-moderequest.pl, before calling CancelReserve().
Similar situation is with opac-modrequest-suspend.pl
This patch provides new soubroutine to chceck if user can cancel given
reserve. It's possible only when he's owner of hold and hold isn't in
transfer or waiting status.
Additionaly there are new test for this function in Reserves.t
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests, QA script and new tests.
Works as described, tested with:
.../cgi-bin/koha/opac-modrequest.pl?reserve_id=XXX
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Conflicts:
t/db_dependent/Reserves.t
Bug 12873 - Reserve can be cancelled by any logged in user
It is possible to cancel reservations through simply running opac-modreserve.pl with existing reserve_id number. This may provide remove even all reservations from system. The only limitation is that user have to be logged in. Simplest solution is to check whether reserve belongs to user or not.
Test plan:
1. Create reserves by 2 different users, and get their ID's
2. Before patch, hold may by cancelled by anyone who run site:
http://example.com/cgi-bin/koha/opac-modrequest.pl?reserve_id=XXX
3. After patch hold may by cancelled only by user whose reserve is.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolin Somers [Wed, 11 Jun 2014 10:25:19 +0000 (12:25 +0200)]
Bug 12405 - Search links on callnumber fails on intranet results page
On intranet results page, the callnumber of items is a search like :
/cgi-bin/koha/catalogue/search.pl?idx=callnum&q=[% result.itemcallnumber |url %]
The callnumber should be URI-escaped to avoid special URI characters like & , ? ...
If the callnumber contains some CCL words or parenthesis, the search will fail, it should be wrapped with double-quotes.
This patch adds this to catalogue/results.pl and catalogue/shelves.pl :
- uri TT filter instead of url
- adds double-quotes using there URI code %22 since its in a HTML attribute using double-quotes
Test plan :
- Edit an item callnumber with : & ABC 123
- Index zebraqueue
- Perform a search returning this item
- Click on the callnumber
=> Without this patch you get no result, because URL parameters are : idx=callnum&q=& ABC 123
=> With this patch you get results
- Set syspref QueryWeightFields off (because this is no bug if on)
- Edit an item callnumber with : AB(C) AND OR
- Index zebraqueue
- Perform a search returning this item
- Click on the callnumber
=> Without this patch you get no result, because the search contains CCL words "OR" and "AND"
=> With this patch you get results
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tested all with and without queryweightfields -
all searches from clicked call numbers for given callnumbers fail without the patch, all are successful with the patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12788: (followup) minor optimization with proper tests
This patch removes the $facets_info calculation from the _get_facets_data_from_record
sub so it is not done for each record. It introduces a new sub, _get_facets_info
that is called from the getRecords loop, that does the job only once.
To test:
- Apply on top of the previous patches
- Run
$ prove -v t/db_dependent/Search.t
=> SUCCESS: _get_facets_info gets tested and it passes for both MARC21 and UNIMARC.
Facets rendering should remain unchaged on the UI.
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12788: facets calculation should skip 100 if ind1=z
This patch adds a test for field 100, to skip it on facet calculation
if ind1=z.
To test:
- Have IncludeSeeFromInSearches set.
- Create a biblio record, when adding an author, create a new authority record
that contains a 400$a field (see from).
- Rebuild zebra db.
- Search for the record making sure the search returns more than one record.
=> FAIL: the facets contain the 'see from' field.
- Run
$ prove -v t/db_dependent/Search.t
=> FAIL: it fails
- Apply the patch
- Run
$ prove -v t/db_dependent/Search.t
=> SUCCESS: it passes
- Re-run the search, notice the 'see from' doesn't show anymore on the facets.
- Sign off :-D
Edit: minor stylistic change
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch refactors the facet extraction loop into a proper function.
The loop is changed so the MARC::Record objects are created only once
instead of the old/current behaviour: once for each defined facet (in
C4::Koha::getFacets).
To test:
- Apply the patch
=> SUCCESS: verify facets functionality remains unchanged.
- Run:
$ prove -v t/db_dependent/Search.t
=> SUCCESS: tests for _get_facets_data_from_record fail, because
100$a is considered for fields with indicator 1=z (field added
by IncludeSeeFromInSearches syspref).
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Colin Campbell [Fri, 18 Jul 2014 08:50:34 +0000 (09:50 +0100)]
Bug 12600: remove duplicate use statement from code
A use C4::Charset was added deep in the body of the code
we have already imported it at the top of the file
(the by convention normal place) As use is executed at compile time
specifying it in the code body does not serve a
useful purpose and detracts from the readability of an already
overly complex subroutine.
Remove the superfluous statement
also removed the tabs introduced to the surrounding lines
by the same commit
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Search still works, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12593: search facets die with regex error if biblio has square brackets in fields
It's quite common to have [something] within facet data, and it produces following error:
Unmatched [ in regex; marked by <-- HERE in m/^[ <-- HERE
This problem was intoduced in Bug 12151 but is trivial to fix.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Good catch.
To test:
- Created a bibliographic record, linked to an authority record (personal name). Did a search that returned the author as a facet.
- Added a [ symbol to the author name.
- Repeated the search
=> FAIL: "Unmatched [ in regex; marked by <-- HERE in m/^[ <-- HERE"
- Apply the patch
- Retry the search
=> SUCCESS: No error, bracket shows correctly.
Passes koha-qa.pl too.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12151: Remove uses of smartmatch operator from Koha/Solr/QueryBuilder.pm
Just that.
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Could only verify by reading the code.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12151: Remove use of smartmatch operator in tools/batchMod.pl
The '~~' smartmatch operator is used to compare MARC::Field->subfield(code)
(i.e. a string) and the text element of each MARC::Field->subfields() which
is also plain text.
Substituting '~~' for 'eq' should be harmless then.
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Tested batch modification of items, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12151: Remove uses of smartmatch operator in report scripts
This patch removes the use of smartmatch operators in report scripts.
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Acquisition and Patron statistics wizard tested, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12151: Remove uses of smartmatch operator in Search.pm and opac-search.pl
This patch removes the use of smartmatch operators in the search code.
Regards
To+
Edit: this revision uses 'grep' instead of Lists::MoreUtils::any
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested search, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Fri, 13 Jun 2014 13:27:45 +0000 (15:27 +0200)]
Bug 12419: Not for loan items are not listed
On the cataloguing search (cataloguing/addbook.pl), if an item has a
notforloan value > 0, the item is not listed in the Location column.
It is quite confusing, the current behavior let patrons believe that
there is not item for the biblio (or less than the real count).
Test plan:
1/ Create 2 biblio records A and B
2/ Create some items for A
3/ Create 1+ item(s) for B with a notforloan status > 0
4/ Reindex both records
5/ Launch a search on the cataloguing module and verify that the
notforloan items are not listed in the 'Location' column.
6/ Apply this patch and verify the not for loan items are listed ("Not
for loan (XXX)").
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, not for loan items now show up. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jacek Ablewicz [Sat, 23 Aug 2014 14:36:21 +0000 (16:36 +0200)]
Bug 12811 - Patron 'Details' and 'Check out' pages not working for staff users without renewal override permissions
In case when the staff user doesn't have (circulate) ->
(override_renewals) permission granted, this code part
var AllowRenewalLimitOverride = [%
CAN_user_circulate_override_renewals && AllowRenewalLimitOverride %];
in circ/circulation.tt and members/moremember.tt leads to javascript
error, because TT statement evaluates to empty string.
To reproduce:
- set AllowRenewalLimitOverride syspref to "Don't allow" (this step is
possibly redundant / not quite relevant),
- for testing purposes, log in as some (sample) staff user whitch does
not have permission granted for "(override_renewals) Override blocked
renewals",
- have a look at some patron accounts (preferably, ones with 1+
check-out), observe that page layout is incorrect in "Check Out" and
"Details" tab.
To test:
- apply patch,
- retest and ensure that this issue is no longer reproductible,
- make sure that there are no regressions of any kinds regarding renewal
override permission for staff users (i.e, that it still works like
intended).
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes QA script and tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
After applying Bug 12899, in moremember page, checkouts table has
misplaced columns.
Test plan:
1. Check out title for a user. Columns in Detail page at checkout tab
are misplaced; there's no Due date column.
2. Aplly patch, everything shuld look fine now.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
My bad! Thanks for catching this.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 10 Sep 2014 12:56:24 +0000 (08:56 -0400)]
Bug 12899: Row grouping in checkouts table is alphabetical and depends on translation
The sort order of the "today's checkouts" and "previous checkouts" row
groupings depends on the label, so in English "today's checkouts" comes
first. However, in other languages the reverse alphabetical order is
incorrect resulting in "previous checkouts" coming first.
This patch adds a dummy column with numeric data on which the sorting
can be done. This should make it translation-agnostic.
To test, apply the patch and install or update a translation which will
demostrate the problem (sv-SE for instance).
- Clear your browser cache and switch to the English templates.
- Check out some items to a patron who has checkouts from a previous
day.
- Confirm that the sorting of the "today's checkouts" and "previous
checkouts" row groups is correct.
- Switch to the new/updated translation and reload the circulation page
for that patron. Confirm that the sort remains correct.
- Confirm that the checkouts table looks correct and that other features
(sorting, checkboxes) still work correctly.
Revision: Corrected the table footer include to correct the colspan
error causing column misalignment.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12729 - Overdue items won't show as overdue in red in circulation
It seems that Firefox date parser doesn't like our dates which are
formatted in ISO format like "2014-08-06 00:00:00". This results in
missing red color in overdue dates.
So intead of munching different date formats and JavaScript (and having
to support different browers) this patch moves check for overdue dates
back to mysql and just transfers boolean value to JavaScript so it can
show correct class for date_due.
Test scenario:
1. find borrower with overdue checkouts
2. verify that all dates are black (and are in ISO format)
3. apply this patch
4. reload page and verify that overdue dates turned red
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with different due dates (hourly and not) and different date formats.
Passes tests and QA script.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
being evaluated in list context inside $template->param() call arguments.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jacek Ablewicz [Wed, 11 Jun 2014 06:51:34 +0000 (08:51 +0200)]
Bug 10519: Suggestions: 'Organize by' and correct display of tab descriptions broken
The tabbed display in suggestions offers different options to organize
the tabs. The descriptions on the tabs and some of the search options were
not working correctly, displaying as "Unknown".
To test:
- Add several suggestions to your installation, make sure you have:
- suggestions from different users
- suggestions managed by different users
- suggestions with different statuses
- suggestions with different selected item types
Test all the 'organize by' options (except "Organize by: Library"
- see note below), make sure that the tabs and search options
have correct descriptions and do no longer display as "Unknown".
- Add 1 or 2 custom status to SUGGEST_STATUS authorized value.
- Verify display is still correct and your new status are displayed.
Note: "Organize by: Library" option is currently severely broken
(and not easily fixable, especially for 'IndependentBranches'
enabled). But this turns out to be a separate issue, with a different
underlaying causes, and it's outside the scope of this patch.
This should be dealt with later, in it's own bug report.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jacek Ablewicz [Tue, 22 Jul 2014 15:57:01 +0000 (17:57 +0200)]
Bug 12619 - Shipment date gets lost on finishing and/or editing the invoice
To reproduce:
- Create a new shipment, make sure to add a shipment date
- Receive or not receive orders
- Finish receiving with the button at the bottom of the page
- Verify that shipment date is now empty
To test:
- reproduce the aforementioned issue
- apply patch
- confirm that the issue is no longer rerpoductible (= shipment date is
not getting lost any longer), and that there are no apparent regresssions
of any kind involving invoice shipment date entering and/or editing
- sign off
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, fixes the issues, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 20 Aug 2014 11:26:49 +0000 (13:26 +0200)]
Bug 12717: Library no longer receiving Overdue email for patrons without email address
Bug 10832 changes the fallback behavior if a patron does not have email
address: a print notice is generated into the message_queue table.
But this can cause issue for some libraries. The script should sent an
email and (generated csv, html, text file) with the list of all unsent
notices.
Test plan:
1/ Add overdue to a patron without email address (or smsalertnumber)
2/ Check email in the overdue rules configuration (or sms)
3/ Launch the overdue_notices.pl cronjob
4/ Verify the message_queue contain a print notice AND an email notice
for the library
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This works as described and restores the old behaviour for now, with
the difference that you have a print notice generated and visible
in the patron account notices tab that will say 'pending'.
We will have to figure out how we can change the workflows nicely
to have only one script deal with print notice in the future.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolin Somers [Tue, 17 Jun 2014 14:38:54 +0000 (16:38 +0200)]
Bug 12438 - Bad encoding in acquisition basket
We noticed a bad encoding (diacritics replaced by <?>) in acquisition basket when updating a server to Debian Wheezy.
We found it comes from a query containing biblio.title twice.
Maybe the mysql newer version creates this side-effect.
Test plan :
- Create an order on a record containing a diacritic in title
- Look at the basket : cgi-bin/koha/acqui/basket.pl?basketno=x
=> Without the patch the record title is bad encoded (with <?>)
=> With this patch the record title is well encoded
- Check also basket CSV export
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Good catch!
Works as expected, passes tests and QA script. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Duplicated biblio.title is a (minor) bug, and should be removed.
The side-effect of it solving an encoding problem might be seen
as problematic: it hides a real problem.
The efforts on 11944 actually solve this encoding problem (11944
merged into master actually fixes this), so I'm pushing it, for
a short term solution for stable, with the hope that we will soon
have 11944 pushed.
BTW, non-diacritic but non-ASCII characters are not broken either.
Kyle M Hall [Wed, 6 Aug 2014 22:36:18 +0000 (17:36 -0500)]
Bug 12432 [QA Followup] - Make "All" tab work when switching back to it
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Mon, 28 Jul 2014 15:18:59 +0000 (10:18 -0500)]
Bug 12432 - Saved reports tabs not working
In release 3.14.05.000 the tabs on the Saved Reports page worked
correctly but after upgrading to 3.16.00.000 the tabs stop working.
Visually the tabs change but the table of reports is not filtered. There
are no errors reported in the browser console.
Test Plan:
1) Attempt to filter saved reports by group tabs
2) Note no matter the tab you select, all reports appear
3) Apply this patch
4) Repeat step 1
5) Note the reports are now filtered correctly
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works as described with the
second patch applied as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sun, 22 Jun 2014 17:31:50 +0000 (19:31 +0200)]
Bug 12465: Improve display of MARC21 710 in intranet and OPAC
Currently, 710$a and $b and $b will not display correctly.
This patch tries to improve the display adding the missing
space between both subfields.
Please test.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested, work as described on staff & opac for 710 detailed view.
Add space and punctuation.
No errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Mon, 30 Jun 2014 14:12:06 +0000 (10:12 -0400)]
Bug 12429 [OPAC] patron seeing fines codes
Bug 2546 introduced translatable handling of Koha account type codes but
missed several codes. This patch adds handling of these codes to the
bootstrap OPAC.
This patch also corrects a couple of instances of incorrect
capitalization.
To test, apply the patch and log in to the OPAC as a user who has
existing fines and charges. View the "Your fines" page. You should not
see any account type codes like CR, LR, or FU.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 27 Jun 2014 18:21:03 +0000 (14:21 -0400)]
Bug 12429 [staff client] patron seeing fines codes
Bug 2546 introduced translatable handling of Koha account type codes but
missed several codes. This patch adds handling of these codes to the
staff client.
This patch also corrects a couple of instances of incorrect
capitalization.
To test, apply the patch and view fines page (Patron details ->
Fines) and the pay fines page (Patron details -> Fines -> Pay fines).
You should not see any account type codes like CR, LR, or FU.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Fri, 15 Aug 2014 16:45:44 +0000 (12:45 -0400)]
Bug 12371 - Links in every patron self-registration email points to a single borrower
If multiple registrations are submitted, the first patron to register
will be used for the first patron to click the registration confirmation
link!
Test Plan:
1) Submit 2 new patron registrations
2) Use the confirm link from the 2nd registration
3) Note you end up registering as the first submitted registration
4) Apply the patch
5) Repeat steps 1 and 2
6) Note you are now confirmed correctly
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Test plan appears to work fine, I have a feeling the sql could be
written better but can't come up with it on a Sunday morning
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and fixes a critical bug.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Brian Norris [Fri, 25 Jul 2014 02:55:04 +0000 (14:55 +1200)]
Bug 12660:Correct mispelling of accomodate in comments
View the file in your git checkout to see the misspelling of accomodate
do the patch
view the files again to see the correct spelling accommodate
Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes typos to correct spelling.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10648 - In records merge greatest field can not be added
When merging 2 records (/cgi-bin/koha/cataloguing/merge.pl), the destination record is build using the fields and subfields checked in source records.
When a field is checked, the javascript code searches in destination record a field with a greater tag number to insert new field before.
When the new field tag number is greater than all existing field tag numbers, the field is not added.
This patch corrects this by adding at end if no greater field tag number exists. Also adds a sort of fields by tag number because all mergo code is based on this.
Test plan :
- Add to a framework a repeatable field with the greater non existing tag number. For example 998.
- Edit 2 records with this framework and add them a value in this tag.
- Put those records is a list
- Go to this list and check the two records
- Click on "Merge selected"
- Click on next
- Go to second source record
- Click on the greatest tag number. for example 998.
=> The field is added at the end of destination record
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as described, no regressions.
Bug 12668 - Stray dollar ($) -sign in opac-reserve.pl
A dollar sign is hard-coded in opac-reserve.pl and becomes apparent when trying to place a reservation
when one has "too_much_oweing" or too much fines.
Removing the dollar sign so we just get
<"Käyttömaksujen katto ylitetty. Et voi tehdä varauksia. Sinulla on maksamattomia maksuja 9.50.">
instead of
<"Käyttömaksujen katto ylitetty. Et voi tehdä varauksia. Sinulla on maksamattomia maksuja $9.50.">
Patch removes hard coded $ sign. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The dollar sign is gone and the message still displays correctly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Fri, 25 Jul 2014 10:43:08 +0000 (12:43 +0200)]
Bug 12662: (follow-up) Ajax-based check in does not work for some system preference settings enabled
ModItem is needed too.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jacek Ablewicz [Fri, 25 Jul 2014 08:56:52 +0000 (10:56 +0200)]
Bug 12662: Ajax-based check in does not work for some system preference settings enabled
To reproduce:
- enable "InProcessingToShelvingCart" or "ReturnToShelvingCart"
system preference,
- for a sample patron with 1+ checkouts, try to check in some item[s]
using checkboxes in the "Check in" column in the checkouts table
which is displayed in the "Check out" or "Details" patron account tabs,
- observe that clicking "Renew or return checked items" button only
results in ajax "spinning wheel" stuck in infinite loop; check-in
operation is not performed.
To test:
- follow the steps above to reproduce this bug
- apply patch
- redo the test; ensure that this issue is no longer reproductible.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 16 Jul 2014 13:13:34 +0000 (09:13 -0400)]
Bug 7462 - duplicate patron shows flags
When duplicating a patron the form fields for setting patron account
flags and restrictions should be hidden as it is when adding a patron.
This patch adds the correct logic to the template.
To test, duplicate an existing patron:
- Confirm that the "Patron account flags" and "Patron restrictions"
sections are not visible.
- Confirm that saving a duplicated patron works correctly.
- Confirm that the edit and new patron entry forms are unaffected.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works ok, all three points confirmed
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, small template change.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 18 Jul 2014 16:22:58 +0000 (12:22 -0400)]
Bug 7237 - duplicating patron not using patron's branch
When duplicating a patron the original patron's library should be
preselected.
To test, apply the patch and choose a patron to duplicate, noting which
library is set as their home library. Click the "Duplicate" button and
cnofirm that the patron's library is preselected on the patron entry
form.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Tue, 22 Jul 2014 10:15:35 +0000 (12:15 +0200)]
Bug 12622: Fix export report as ods
Bug 11679 introduces an ods export for reports.
It looks quite buggy:
1/ You get a Perl error if the report has no results
2/ The ods file contains 1 lines less than the total results.
Test plan:
After applying this patch, try to export a report which has no results
and verify you get an ods file with headers only.
Try to export a report which has a least 1 result and verify the
generated ods has the right number of lines.
Signed-off-by: Robert Higgins <robert.higgins@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes the reported problem, passes all tests and QA script.
Added the sign-off line for Robert.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Thu, 17 Jul 2014 14:57:06 +0000 (10:57 -0400)]
Bug 12596 - Backdating returns with SpecifiyReturnDate causes fines for items not overdue!
When using the backdating of returns feature, an item that is not
overdue is treated as being as many days overdue as it is *not* overdue.
This is due to the fact that _get_chargeable_units appears to return the
difference between the return date and the due date without
consideration the return date being earlier than the due date.
Test Plan:
1) Apply the unit test patch
2) prove t/db_dependent/Circulation.t
3) Note the failure
4) Apply the second patch
5) prove t/db_dependent/Circulation.t
6) Note there are no failures
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fixes some badly named variables also
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
In order to test this, you need to activate SpecifyReturnDate.
I confirmed the problem and verified that the bug fixes it
by running the tests, but also by testing in staff.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Thu, 17 Jul 2014 16:17:48 +0000 (12:17 -0400)]
Bug 12596 - Unit Test
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sat, 12 Jul 2014 12:22:53 +0000 (14:22 +0200)]
Bug 8539: Library transfer limits page has incorrect permission
Without this patch the library transfer page required the
'borrowers' permission, which is not quite right for a page
in the administration module.
This patch changes the permission to 'parameters_remaining_permissions'
To test:
Verify the page is accessbile with:
- superlibrarian
- administration (full)
- administration, remaining permissions (without manage_circ_rules)
Verify the page is not accessible without all of those permissions.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Tue, 4 Feb 2014 17:42:55 +0000 (12:42 -0500)]
Bug 11703 - Convert checkouts table to ajax datatable [3.16.x]
When a patron has many checked out items, circulation.pl can take a very
long time to load ( on the order of minutes in some cases ). This is
primarily due to the processing of the previous checkouts list. If we
convert to this table to a datatable that fetches its data via ajax, we
can make circulation.pl far more responsive. The same should be done
with relative's checkouts as well.
Test Plan:
1) Apply this patch
2) Observe that the checkouts and relatives' checkouts tables
are now loaded asynchronously
3) Observe and verify the renew and return actions are now
ajax based and function in a manner equivilent to how they
used to.
This bug had quite a few followups, so I squashed all of them into one
change so that code is easier to follow. Original commit messages are below:
Bug 11703 - Use the ajax datatables on patron details page
Bug 11703 - Convert holds tables to ajax datatables
Bug 11703 [QA Followup 1] - Center bProcessing message over table
Bug 11703 [QA Followup 2] - Remove icons from checkout and clear buttons
Bug 11703 [QA Followup 3] - Remove references to UseTablesortForCirc
Bug 11703 [QA Followup 4] - Add back in Today's checkouts/Previous checkouts rows
Bug 11703 [QA Followup 5]
Bug 11703 [QA Followup 6] - Move strings to an include file for translation purposes
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Test plan on bug report:
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=11703#c98
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703 [QA Followup]
* Bold record title, fix table width
* Change output_pref_due to output_pref
* Retain functionality of IssuesDefaultSortOrder system preferences
* Use datatables.inc in circulation.tt
* Fix up holds table details
* Add plugin to about
* fix relatives' checkouts
* add too_many string
* remove dead syspref from db
* Sort relatives' checkouts and holds tables client side
* Provide context for translation of strings
* Fix unterminated string literal, add missing paren
* Add replacement of _AUTHOR_ with title's author for holds
* Format prices correctly
* Format checkout dates correctly
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703 [QA Followup] - Use format instead of replace for string translation
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703 [QA Followup] - Use interface instead of themelang for checkboxes plugin
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703 [QA Followup] - Restore showing earliest renewal date for 'too early' renewals
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703: (qa-followup) fix update database entry
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703 [QA Followup] - Stop IE from caching ajax request
Signed-off-by: Britta Cramer <britta.cramer@inm-gmbh.de> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703 [QA Followup] - Allow keyboard navigation of tabs
Signed-off-by: Britta Cramer <britta.cramer@inm-gmbh.de> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703 [QA Followup] - Change "No data available in table" to "Loading..."
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Bug 11703: (qa followup) consistency in svc
This patch removes the trailing .pl from the introduced svc scripts.
Also removes a leftover (wrong license text)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 9 Jul 2014 07:49:19 +0000 (09:49 +0200)]
Bug 11226: subscription frequencies and numbering patterns should be editable with serials permissions
Bug 7688 does now allow patrons with serials permissions to edit
subscription frequencies/numbering patterns.
Test plan:
Try to access to serials/subscription-frequencies.pl and
serials/subscription-numberpatterns.pl with the "serials" permissions.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
With patch and only serial permissions can now access
frequences and patterns.
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Yohann Dufour [Tue, 24 Jun 2014 12:27:21 +0000 (14:27 +0200)]
Bug 12470: adding unit tests for the routines CheckValidBarCode and CheckIfIssuedToPatron of the module C4::Circulation.pm
The routines CheckValidBarcode and CheckIfIssuedToPatron were not tested
Test plan:
1/ Apply the patch
2/ Execute : prove t/db_dependent/Circulation/CheckValidBarcode.t t/db_dependent/Circulation/CheckIfIssuedToPatron.t
3/ The result of the command has to be a success without error or warning :
t/db_dependent/Circulation/CheckValidBarcode.t ...... ok
t/db_dependent/Circulation/CheckIfIssuedToPatron.t .. ok
All tests successful.
Files=2, Tests=32, 3 wallclock secs ( 0.04 usr 0.01 sys + 2.88 cusr 0.17 csys = 3.10 CPU)
Result: PASS
projects / koha.git / log