Kyle M Hall [Wed, 27 Nov 2013 17:40:11 +0000 (12:40 -0500)]
Bug 11314: restore ability to see only 5 entries on parcel.pl
Bug 9130 removed the ability to limit the tables on parcel.pl to 5 rows,
as well as the "sticky" feature. It is trivial to restore this
functionality. These datatables are already using bStateSave, so are
they are "sticky" already. The only part left is to enable the
ability to limit the table to 5 rows at a time.
Test Plan:
1) Apply this patch
2) Browse to parcel.pl
3) Note the default rows count is still 10
4) Note the option to limit the row count to 5
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
Double-checked that the "sticky" feature is still in place thanks
to bStateSave.
I didn't notice a difference due to iDisplayLength being added, but
the extra option of "5" to the list is there.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 2bb4f4b42b3e3dfc7bc4233d16888d953625025b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolyn SOMERS [Wed, 27 Nov 2013 15:40:09 +0000 (16:40 +0100)]
Bug 11313: supply empty value in mandatory comboboxs in MARC record editors
In biblio (or authority) record editing or creation, Bug 3727 added
an empty value to combobox for subfields using itemtype authorized values,
which is mandatory and does not have a default value. This to avoid
selecting arbitrarily the first value of the combobox.
This patch extends this behavior to normal authorized values like CCODE,
COUNTRY ...
Also, when record already exists and has a defined value for the subfield
this value will be selected in combobox so there is no need for an empty
value.
Test plan :
- In a biblio framework, set a subfield mandatory and using itemtypes
authorised values
- Set a default value for this subfield
- Create a new record with the framework
=> You see the subfield with a combobox, the first empty value is selected
- Go to biblio framework and set a default value for the subfield
- Create a new record with the framework
=> You see the subfield with a combobox, the default value is selected
and there is no empty value
- Select an other value and save the record
- Edit this record
=> You see the subfield with a combobox, the saved value is selected and
there is no empty value
Perform same tests with a normal authorized values categorie (instead of
itemtypes).
Perform same tests with with authority creation/edition
Perform same tests with a normal authorized values categorie and authority
creation/edition
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
Fridolyn: I had a lot of difficulty understanding your test plan,
especially since the second line should not be in the test plan
(since if there is a default value, no empty value should appear).
Perhaps it would be useful to use more whitespace to separate
steps and the things for which a tester should check.
Also, it might be useful to specify what testers should check for
before and after applying the patch, so that they're sure that the
behaviour has been corrected.
In any case, the patch works! Certainly a helpful addition.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
1) Adding a bibliographic record
Subfield is mandatory, no default value:
- adding record: no value is preselected, empty value exists
- editing record: saved value is shown, empty value exists
Subfield is mandatory, defined default value:
- adding record: default is preselected, no empty value
- editing record: saved value is shown, no empty value exists
Subfield is not mandatory, defined default value:
- adding record: default is preselected, empty value exists
- editing record: saved value is shown, emtpy value exists
Subfield is not mandatory, no default value:
- adding record: empty value is preselected
- editing record: saved value is shown, empty value exists
2) Adding an authority record
Repeating tests from above.
- Subfield is mandatory, no default value: OK
- Subfield is mandatory, defined default value: OK
- Subfield is not mandatory, defined default value: OK
- Subfield is not mandatory, no default value: OK
Jonathan Druart [Tue, 14 Jan 2014 11:06:34 +0000 (12:06 +0100)]
Bug 11549: make it possible to receive and cancel the receipt of a transferred order
To reproduce the issue:
- transfer an order from a basket to another. Note the previous
ordernumber (X) and the new one (Y).
- receive the order
- cancel the receipt
- verify the order has been deleted:
select count(*) from aqorders where ordernumber=Y;
select * from aqorders_transfers where ordernumber_from = X;
The value for ordernumber_to is null.
To test this patch:
- apply this patch
- transfer an order from a basket to another
- receive the order
- cancel the receipt
- verify the order still exist in the basket where the transfer has been
done.
Owen Leonard [Wed, 29 Jan 2014 17:52:51 +0000 (12:52 -0500)]
Bug 11534: fix bug that made it impossible to remove instructors from a course
In some cases clicking the "remove" link to remove a course instructor
when editing a course reserves course doesn't work. I suspect this is
caused by leading zeroes in the card number. This patch refactors the
relevant function to fix the problem and to remove inline JavaScript
from generated markup.
Other changes:
- Make the "Remove" text translatable
- Re-order the first name and last name when added by JavaScript to
match the template's "surname, firstname" order.
To test:
1. If necessary, create or modify a patron to have a card number
with leading zeroes.
2. Go to Course reserves and add or edit a course.
3. If you are editing a course and there are existing instructors, click
the "remove" link. Nothing will happen.
4. Perform a patron search and choose one of the results. The name
should be added to the list of instructors in the format "surname,
firstname."
5. Click the "remove" link next to the patron name which was just added.
Nothing will happen.
6. Apply the patch and repeat step 4. The "remove" link should work.
7. Add an instructor and save the course reserve. Repeat steps 2 and 3.
The "remove" link should now work.
To test the translation fix, after applying the patch run "translate
update [language code]" and confirm that the "Remove" string is listed
in the updated po file for course_reserves/course.tt.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit d567733f2325817cca694c437c01a9e1c669f368) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Galen Charlton [Thu, 16 Jan 2014 20:36:02 +0000 (20:36 +0000)]
Bug 11533: fix authority searching with no sorting when QueryParser is enabled
This patch fixes an issue where chosing 'None' as the sort order
for an authority search would result in zero hits if QueryParser is
eanbled.
This patch also adds some additional test cases.
To test:
[1] Enable QueryParser.
[2] Perform an authority search in the staff interface that
uses 'Heading A-Z' as the sort order and returns hits.
[3] Run the same search, but with the sort order set to 'None'.
No hits are returned.
[4] Apply the patch.
[5] Do step 3 again. This time, hits should be returned.
[6] Verify that prove -v t/db_dependent/Search.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 27c312b721d5533560234675712391a60f354c51) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch duplicates the SearchAuthority tests, with QP enabled.
Searching shouldn't be affected by QP. Instructions for manually
reproducing this can be read in the first comment for the bug entry.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 99e2686a4985fd487dfb5e898f24ceba80ba48ab) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Galen Charlton [Thu, 16 Jan 2014 23:07:09 +0000 (23:07 +0000)]
Bug 10987: (follow-up) fix display of authorities containing only one see from or see also lnik
This patch fixes an incorrect test on the number of see from and
see also links in the authority record, as otherwise if a record
had only one 4XX or 5XX, the linked headings weren't displayed at
all. This patch also makes the test consistent across the staff
theme and the two OPAC themes.
Bug 10987: remove duplicate 'see also' and 'see from' labels from authority search results
If an authority record has more than one 4xx$a (or 5xx$a) entries the
corresponding labels 'see also' and 'used for/see from' werwe repeated.
This patch removes duplicate instances of the labels, improving
readability.
To test:
- Have authority records with more than one entry on the 4xx (or 5xx)
fields.
- Do a search, check "see also:" (or 'used for/see from') appear more
than once.
- Apply the patch
- Reload and check it looks nicer :-D
- Repeat for: staff auth search, OPAC using ccsr, OPAC using prog
- Signoff
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as decribed. No koha-qa errors
Nice view on staff and both opac
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 910dff28254b8a93ed03884b0e768fd7c013f449) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Galen Charlton [Thu, 16 Jan 2014 22:44:25 +0000 (22:44 +0000)]
Bug 10691: (follow-up) replace HTML comments with TT contents
Comments on the usage of Template Toolkit blocks don't need
to appear in the rendered HTML, so this patch converts HTML
comments to TT comments and thereby saves a tiny amount of
bandwidth.
Bug 10691: (follow-up) restore behaviour for control field ($w)
As noted by Jared, in the presence of 4XX$w or 5XX$w the display
got broken by this refactoring. This patch restores the previous
behaviour in that front.
The OPAC themes get fixed too, and the Bootstrap one gets this
fix too.
Applied the fix that Galen proposed on comment #30 regarding
Zeno's fix in bug 11174.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 06ef9f11098405cd688f43af39d828a4eb674582) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 10691: use authority ID in see-also links in authority search results (OPAC)
This patch changes the URL and data used to show the 'see also' links
on the OPAC's authority search results page.
Bonus points: makes some strings translatable.
To test:
- On your dev setup (master) create some authority records (I created
personal name authorities).
- Pick one of them and link 400$a to another one, do the same with 500$a
- Add some other 400$a and 500$a without linking (i.e. plain text)
- Make sure zebra is running and changes got indexed.
- In the OPAC search for the authority that is linked to the others.
- Check the 'see also:' link points to an authority search
- Apply the patch
- Reload/re-do the search
- Check the 'see also:' link points to the authority id in the case
of linked authorities, and to an authority search in the case of
plain text headings.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ae7431608cfa2f9aa2674079d17f3b96fa12c8c7) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 10691: use authority ID in see-also links in authority search results (staff)
This patch changes the URL and data used to show the 'see also' links
on the Staff's authority search results page.
Bonus points: makes some strings translatable.
To test:
- On your dev setup (master) create some authority records (I created
personal name authorities).
- Pick one of them and link 400$a to another one, do the same with 500$a
- Add some other 400$a and 500$a entries with plain text (i.e. no
linking)
- Make sure zebra is running and changes got indexed.
- In the staff interface search for the authority that is linked to the
others.
- Check the 'see also:' link points to an authority search
- Apply the patch
- Reload/re-do the search
- Check the 'see also:' link points to the authority id for linked
authorities,
and to an authority search result in the case of plain text entries.
- Check that the authority search from the cataloguing interface still
works as usual.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit c62557a4fa239487e128754e79cd3a9427d4f964) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Mon, 24 Feb 2014 11:15:55 +0000 (12:15 +0100)]
Bug 11846: Correct database update for restrictions with date 9999-12-31
The borrowers with indefinite restrictions have borrowers.debarred with '9999-12-31'.
Database update for this bug contained :
INSERT INTO borrower_debarments ( borrowernumber, expiration, comment )
SELECT borrowernumber, debarred, debarredcomment FROM borrowers WHERE debarred IS NOT NULL
For borrowers where borrowers.debarred is '9999-12-31', this value
is copied into borrower_debarments.expiration.
This is not correct because borrower_debarments.expiration must be
NULL for indefinite restrictions.
This patch corrects update 3.13.00.035 and also adds an update for
databases already updated.
Test plan :
- Use a database with version 3.13.00.000
- Set a borrower as restricted for ever (leave until empty)
- Use sources to master + patch
- Perform updatedatabase
- Look at borrower details, tab "Restrictions"
=> Without patch, you see Expiration 31/12/9999
=> With patch, you see Expiration Infinite
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I tested both DB revisions by resetting Version of my database (and
adding a SetVersion after the revised older dbrev). This was possible
since the debarred field still exists in borrowers. (I have my doubts
about that, but that goes outside the scope of this report.)
Also note that routine _UpdateBorrowerDebarmentFlags puts back 9999-12-31
into borrowers for indefinite restrictions (which looks not very consistent).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit f6131d8e6094ae9e221a9d5750d744ed1f91dd85) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Marcel de Rooy [Mon, 2 Dec 2013 08:41:53 +0000 (09:41 +0100)]
Bug 11329: Check for MARC record existence in catalogue/showmarc
Intranet counterpart patch. Same check as in opac/opac-showmarc.
Test plan:
[1] Run showmarc.pl with valid biblionumber in id parameter.
[2] Remove id parameter from URL. You should get a 404 now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Marcel de Rooy [Mon, 2 Dec 2013 08:30:13 +0000 (09:30 +0100)]
Bug 11329: Check for MARC record existence in opac-showmarc
Instead of just running as_formatted, check if GetMarcBiblio returned
a reference. If you e.g. did not pass an id, return 404 instead of 500.
Consistent with opac-export.pl
Test plan:
[1] Run opac-showmarc.pl with valid biblionumber in id parameter.
[2] Remove id parameter from URL. You should get a 404 now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 80bcbd798991eaa57bcc7b5ac8906b276fbed5bf) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Galen Charlton [Fri, 17 Jan 2014 06:04:37 +0000 (06:04 +0000)]
Bug 11473: (follow-up) ensure link to item is construct correctly
This patch adjusts the check on action_logs.info to better detect
if the event concerns an item. This fixes a problem where the links
from log entries on item modifications would, if followed, result
in internal server errors.
David Cook [Mon, 6 Jan 2014 04:01:10 +0000 (15:01 +1100)]
Bug 11473 - add 'biblio' and 'item' to cataloguing logging info
This patch adds the words 'biblio' and 'item' to the 'info'
of the cataloguing logs which were missing them (such as biblio
delete, biblio mod, item mod, upload cover image).
This patch also adds 'authority' for authority mod.
_TEST PLAN_
Before applying:
1) Create/view mods for items, biblios, and authorities.
2) Create/view biblio deletion
3) Create/view upload cover image log
4) Note that none of these contain the words 'biblio','item',or
'authority' in their "Info" columns.
Apply patch.
5) Repeat steps 1-3
6) Note that the new logs contain 'biblio','item', and 'authority'
in their "Info" column, while the past ones don't.
7) Note also that 'biblio' and 'item' will have 'Biblio' and 'Item'
appear in their "Object" column for the new logs
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5885077fbbc97add0d077898c06726ef3106eee9) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
David Cook [Mon, 6 Jan 2014 03:43:53 +0000 (14:43 +1100)]
Bug 11473 - Remove boilerplate in log viewer template
This patch eliminates unnecessary conditions and boilerplate.
_TEST PLAN_
Apply the patch.
1) Try viewing logs for circulation, patrons, fines,
cataloguines, serials, authorities, etc.
2) Note that everything should look exactly the same as before,
with one exception: FINES
3) Fines will now show "member X" for the user associated with
the fine.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5b3535899acfdcd309d722dba39a8bdcdbdc54e4) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
David Cook [Mon, 6 Jan 2014 03:32:31 +0000 (14:32 +1100)]
Bug 11473 - Fix log viewer template conditions
This patch adds the 'loopro' key to the 'module' value, so that
conditions are actually triggered in the template logic.
(Note: loopro.CIRCULATION is valid, but I changed it for the sake
of consistency across the different conditions.)
This patch also adds substr checks to the 'info' column when
using the cataloguing module. This will check for 'item' and 'biblio',
so that the appropriate label qualifer can be shown in the log viewer.
If either term is absent, the unqualified number will be shown instead
(this will be the majority of action logs at this point).
_TEST PLAN_
Before applying:
1) Access log viewer from Tools (or wherever really)
2) Look up logs for circulation, patrons, cataloguing, serial,
authorities, etc.
3) Note that the "Object" will always just be a number without qualification.
After applying the patch:
1) Look at those same logs
2) Note that the object number for borrowers will usually be prefaced
by 'member' (notwithstanding FINES which aren't taken into account in
this template yet); new bibs and new items should say 'Item X' or
'Biblio X'. Serials should have a link. Authorities should have a link
and an 'auth' preface.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ac6fb12c9aff29a652ee10c960ab10309d22adee) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Fri, 10 Jan 2014 16:56:15 +0000 (11:56 -0500)]
Bug 11476: remove extra empty option from title pull-down in OPAC self-registration
If you have patron titles enabled, the OPAC patron details form lists 2
empty spaces instead of 1. An empty option is passed by the script, so
the template does not need to include one.
To test you must have at least one patron title set in BorrowersTitles
system preference and OPACPatronDetails must be set to "allow."
1. Apply the patch
2. Log in to the OPAC
3. Click the "personal details" tab.
4. Click the "salutation" dropdown. There should be only one blank line
preceding the existing titles.
Test in both prog and bootstrap.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described for existing and creating new accounts.
Jonathan Druart [Tue, 8 Oct 2013 15:17:45 +0000 (17:17 +0200)]
Bug 11018: allow adding order from a reverted MARC batch
Weird behavior:
When an import is undone into catalog, the status is set to "reverted".
But if you open the add orders from iso2709, the status is automatically
set to "imported" and does not appear in the list.
So it is not possible to import a reverted batch.
[RM note: since a reverted batch is nonetheless a staged batch, and
could be reused, allowing orders to be placed by taking bibs
from a reverted batch is not as odd as it might sound. It *can* look
odd for a staged or reverted batch to contain records that are
imported, but that's a long-standing oddity.]
Test plan:
- verify you reproduce the weird behavior
- apply this patch
- import a file and the batch into the catalog
- verify (in the your mysql/MariaDB cli) the status is "imported"
- verify it does not appears in the add orders from iso2809 page
- undo the import
- verify (in the your mysql/MariaDB cli) the status is "reverted"
- verify it appears in the add orders from iso2809 page and the status
is always "reverted"
- finish the order
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 4bd730d4c24440c157801b68e248002b10ec0dd3) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jacek Ablewicz [Mon, 24 Feb 2014 16:37:43 +0000 (17:37 +0100)]
Bug 11352: fix unexpected data loss issues with batch patron deletion/anonymization
Batch patron deletion/anonymization tool has some issues:
1) If 'dateformat' setting in I18N/L10N system preferences is set
to anything other then 'iso' (eg. 'metric'), bulk deletion when using
'expiration date is before' criterion is not working properly. Date
entered in this field will be efectivelly ignored (or possibly
sometimes wrongly interpreted as different date, in other format)
on the final patron deletion stage. This may result in deleting
(or moving to trash) more borrower records then intended.
2) Bulk/batch patron deletion should skip borrowers with
nonzero account balance (ones with oustanding fines or credits)
3) This tool shouldn't offer to choose as deletion criterion
those patron categories which have category_type set to 'S'
(= staff patron categories)
This patch fixes above mentioned problems. It also adds an option
to "test run" patron batch deletion, and makes this option
the default choice in "warning" stage.
Test plan:
- prepare test database with some patron records (at least 2,
the more the better) set up in such a way that they will be vulnerable
to issues 1 & 2
- confirm issues 1,2
- restore test database
- apply patch
- ensure issues 1 & 2 are no longer present - first by using new "test
run" option: for #1, record counts in "warning" stage and "final" stage
should be now the same; for #2, observe that patron records with nonzero
balance are now excluded from deletion
- redo the tests, this time choosing "delete permanently" and "move
to trash" instead of "test run"
- test #3 by changing "Category type" to "S" in some
test patron categories - after that, those categories should no
longer be choosable as deletion criteria.
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Tested with dateformat = dd/mm/yyyy. I tested with two expired patrons,
one with fines and one without. Before the patch a lot of unexpected
patrons were deleted along with the expected ones. After
applying the patch only the expired patron was deleted, not the
one with fines. The test run and the "real" run reported correct numbers.
The patch also makes sure no patron categories with category_type = S
are suggested for batch deletion.
Note: The ergonomics of the "Batch delete/anonymize" tool is hardly
optimal, but this patch fixes a real, data-loosing bug, so let's
deal with the ergonomics later.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 69216d2217519cd6d8ad97710236251abdd89ae9) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 9788: (follow-up) Unit tests for changed routine GetReservesFromItemnumber
Adds three tests to Reserves.t for GetReservesFromItemnumber.
We test if this routine does not return a future next available hold,
a future item level hold. And if it does return a future wait (that is:
a confirmed future hold, using ConfirmFutureHolds).
Note that Holds.t does also contains some basic tests for this routine,
but the additional tests seem to better located in the direct context of
tests for bug 9761 for ConfirmFutureHolds.
Test plan:
Run both t/db_dependent/Holds.t and t/db_dependent/Reserves.t.
Verify if both tests do not fail.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit d211fa50ede180ed511cdf7f55be6c084abc1ff5) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Mon, 4 Nov 2013 10:55:57 +0000 (11:55 +0100)]
Bug 9788: QA followup
1/ CURRENT_DATE() is a MySQLism and should be replaced with CAST(now() AS
DATE).
2/ The date formatting should be done in the template (using the TT
plugin).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 38edd714c598322e81a32a0dfc5f2ce0da46826d) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Marcel de Rooy [Fri, 21 Jun 2013 16:43:59 +0000 (18:43 +0200)]
Bug 9788: (follow-up) for expirationdate in Letter.pm
Pasting comment from the Bugzilla report:
Looking bit longer at this code, it is kind of strange to find it
there in the first place. Adding maxpickupdelay in Letters.pm should
not be there, but it is..
Also this date is not used normally in the default HOLD Available for
Pickup notice (that we are generating in this case). And if it would be
undef, the expiration date should imo be empty instead of today+0.
(before adding maxreservespickupdelay, you should test the allowexpire
pref first) So it is an (invisible) bug on its own.
Test plan:
See former patch. Kyle just discovered this bug, apparently by
deleting the maxpickupdelay pref..
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit a23d4181b1e756a61a036059b8b909d4f0d30537) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 9788: (follow-up) removing the alldates parameter from GetReservesFromItemnumber
Before bug 9788 the alldates parameter of GetReservesFromItemnumber was
actually not used in the codebase.
The first patch of bug 9788 did change that and passed true by default.
But a closer look revealed that we do not really need it.
The parameter is removed by this patch; the SQL statement is slightly
adjusted: if reservedate<=now or a waitingdate is filled for the
requested itemnumber, GetReservesFromItemnumber will return the reserve.
This includes so-called future waits: a future hold that has been confirmed
ahead of time with pref ConfirmFutureHolds > 0 days.
Note that future item-level holds are not really interesting to return; this
just corresponds to original behavior. Future next-available holds are not
in view at all; they do not contain an item number.
Test plan:
Actually, the test plan of the first patch is valid. But for completeness I
repeat it here:
[1] Enable future holds and set ConfirmFutureHolds to 2 days.
[2] Place a future next-available hold for 2 days ahead.
[3] Check item status on catalogue detail. Available? That is fine.
[4] Confirm the future hold by checking it in. ('future wait')
[5] Look at item status again on catalogue detail. Must be Waiting now.
[6] Switch to OPAC and login as another opac user. Goto Place a hold.
[7] Check item status with item level hold info. Is it waiting?
[8] Try to place hold in staff, check item level status again. Waiting?
[9] Make a transfer for the item. Switch branch. Check hold status on
Transfers to receive.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 92be11bbcf20628dd7db8b83fc0b902ba578a28a) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Marcel de Rooy [Mon, 11 Mar 2013 13:28:57 +0000 (14:28 +0100)]
Bug 9788: Improvements when calling GetReservesFromItemnumber
This patch makes GetReservesFromItemnumber also returns the waiting
date and removes some repeated code.
Improves item status display on catalogue detail, when placing a hold at
opac-reserve and in staff, and on transfers to receive form.
This patch builds on work from reports 9367 and 9761.
Test plan:
Place a future next-av. hold (enable future holds prefs), say 2 days ahead.
Check item status on catalogue detail. Nothing to see.
Enable ConfirmFutureHolds by inserting a number of days, say 2.
Confirm earlier hold by checking it in. Look at item status again on detail.
Switch to other opac user. Try to place a hold again. Check item status with
item level hold info. Try to place hold in staff, check item level status.
Make a transfer for that item. Switch branch. Look at transfers to receive.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 1a9737be768aa1e585addc596e2fcb5a77482c38) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Francesca Moore [Tue, 14 Jan 2014 22:43:00 +0000 (11:43 +1300)]
Bug 11522: improve formating of self-registration form
1. in prog theme, enable opac self-registration and inspect clear date
with firebug; note that there are empty paragraph tags
2. add date of birth as a requirment in self-registration
3. apply patch
4. refresh page and notice that empty paragraph tags have been deleted,
so that required lines up with clear date
5. repeat the above steps for bootstrap theme
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 42ec10670efb6e33fa23537c1037ff9087f55e30) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Sophie Meynieux [Tue, 4 Dec 2012 17:05:36 +0000 (18:05 +0100)]
Bug 9210: wrap long lines in printed hold notices
This commit adds wrapping styles to print-notices.tt template
Test plan:
* place a hold on a title with a very very long title or author
* mark it as "waiting for pickup" by doing a checkin
* go to command line interface, and run
* misc/cronjobs/gather_print_notices.pl /tmp
* misc/cronjobs/printoverdues.sh /tmp
* if your title/author is long enough, it's split on 2 lines
with this patch (it is not before this patch)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 06a8b6f314ded89fa6b4f94276e68e390b7afc3a) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
David Cook [Thu, 9 Jan 2014 06:12:26 +0000 (17:12 +1100)]
Bug 11502: make library filter in "Holds To Pull" more precise
This patch uses regex checking via the DataTables fnFilter API method
to make the branch filter more precise on the "Holds to Pull" page.
The ability to use regex is built into DataTables so this just adds
the actual expression.
_TEST PLAN_
Before applying:
1) Add library (branches) with codes of NM, NMH, and NB
2) Add items (that can be placed on hold) at all these branches
3) Place a hold on an item that is only available at NM
4) Place a hold on an item that is only available at NMH
5) Place a hold on an item that is only available at NM and NB
6) Go to "Holds to Pull" in the Circulation module
7) Filter by these three different values
8) Note that filtering by "NM" will incorrectly bring up all three
holds, while "NMH" and "NB" will only pull up one (like they should).
Apply the patch.
9) Shift+refresh the page so that your Javascript refreshes
10) Repeat step 7 (filtering by the different branch values)
11) Note that filtering by "NM" will now only bring up the hold for "NM"
and the hold for "NM" and "NB", while the others still only bring up
one hold.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit e96d73aa9f462fb653b8b67d7d5bff81dab94be7) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Fri, 10 Jan 2014 20:46:29 +0000 (15:46 -0500)]
Bug 11505: fix untranslatable table headers in Label batch manager
The label batch manager script hard-codes the table header cell labels
in order to pass them to an HTML-building function. This obviously isn't
the best solution for internationalization, but picking the whole scheme
apart would be very complicated.
Instead this patch uses a SWITCH statement to check for each possible
case and outputs the correct translatable string for each.
To test, apply the patch and run "perl translate update" for any
translation. Check the revised po file and confirm that the new strings
are present. View the label batch edit page and confirm that the table
headings look correct: Tools -> Labels -> Manage batches -> Edit batch.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests.
Similar fixes are probably needed for other pages of the labels
modules.
Owen Leonard [Fri, 10 Jan 2014 17:45:30 +0000 (12:45 -0500)]
Bug 11381: improve styling of IDreamBooks content in bootstrap theme
Styling of IDreamBooks elements is not correct in the bootstrap theme
because the relevant CSS was not transferred from the prog theme. This
patch adds it back.
To test, switch to the bootstrap theme and enable IDreamBooks system
preferences in the OPAC, particularly IDreamBooksReadometer. Find a book
in the OPAC which shows IDreamBooks review data and confirm that
everything looks correct.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described. Tested with "The help".
While adding the --help and -h switches I forgot to change to arguments
count validation so that one can actually use those parameters (i.e.
koha-create should accept being invoked with only one parameter).
This patch just changes the minimum parateres required from 2 to 1.
To reproduce:
- Run 'koha-create --help' from master
=> Usage information is printed BUT ALSO an "Error: wrong parameters"
message
- Apply the patch and
- Run 'koha-create --help'
=> Usage informatio it printed and no error message.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 692c4f03b5adebec754c1a8db16e2db97c63f554) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Galen Charlton [Fri, 10 Jan 2014 16:49:01 +0000 (16:49 +0000)]
Bug 10952: (follow-up) clear seach history from session after saving it to DB
This patch makes sure that the search history from an
anonymous session is cleared from the session after a user
logs in (and the session history is saved to that user's
record in the database). This fixes a problem where the
search history from the session got repeatedly added to the
database each time the user did something while logged
into the OPAC.
Julian Maurice [Wed, 18 Dec 2013 09:58:36 +0000 (10:58 +0100)]
Bug 10952: (follow-up) comments fixes and unit tests
- Remove unit tests for ParseSearchHistoryCookie, which doesn't exist
anymore
- Add unit tests for ParseSearchHistorySession and
SetSearchHistorySession
- Remove/Modify comments about search history cookie
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Tests fixed and moved, and comments tidied up
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit bbf7cd6876e94865492e3fd19e59c31b6b95b588) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Julian Maurice [Thu, 26 Sep 2013 09:22:26 +0000 (11:22 +0200)]
Bug 10952: Store anonymous search history in session
Storing search history into cookie can cause problems, due to the size
limitation of 4KB.
The solution here is to store search history into the CGI::Session
object, so there is no size limitation (but anonymous search history
still remember up to 15 requests max.)
Test plan:
- Go to OPAC in anonymous mode.
- Check that the "Search history" link is *not* shown in the top right
corner of the page
- Make some searches on /cgi-bin/koha/opac-search.pl
- The "Search history" link should appear. Click.
- Your search history should be displayed.
- Try to log in with invalid username/password
- Go back to search history, it's still there
- Now log in with valid username/password
- Your anonymous search history should be saved into your own search
history.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Restoring original sign offs and comments below
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
Well, search history saving is similar before and after patch.
i.e. anonmymous search is saved when user logs in, but cookie
KohaOpacRecentSearches is empty.
Shows current an previous session searches
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
All tests and QA script pass, works as described.
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit d07df7d51250bb5a40bb556aab48afb18a67a396) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Tue, 7 Jan 2014 14:14:01 +0000 (15:14 +0100)]
Bug 11475: fix return link after editing/deleting items in batch
Bug introduced by bug 9044.
Test plan:
1- First we search for records with multiple items (books or serials,
does not matter)
2- We open this record we found with multiple items for editing
3- We chose "Edit items in batch" option from the "Edit" menu
4- We make corrections on the fields under the "Edit item" (For example
we change the collection code as "fiction")
5- We save this using "Save button" at the bottom, after we are done.
6- Just after we save, there will be a button named "Done" available
just under the page, and when we click on "Done" we encounter the Error
screen.
Before the patch, the "Done" link points to
/cgi-bin/koha/tools/CATALOGUING.
After applying the patch, the "Done" link points to the biblio detail
page.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised
Robin Sheat [Tue, 19 Nov 2013 03:19:12 +0000 (16:19 +1300)]
Bug 10646 - warn if mod_rewrite is not enabled
Koha requires mod_rewrite. If it's not enabled in Apache, then
koha-create will now abort with a helpful error message. Also adds a
warning when not run as root to avoid confusing errors.
Test plan:
* apply the patch
* a2dismod rewrite
* run koha-create without sudo, note the error about being root
* run koha-create with sudo, note the error about rewrite
* a2enmod rewrute
* repeat test above, note that it works
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected.
Bug 11499: UT: Make zebra_setup.pl correctly set indexing mode
By adding the relevant environment variables to the script the generated
koha-conf.xml file for the unit tests is correct now.
Test plan:
- Verify that tests pass now:
$ prove -v t/db_dependent/Search.t 2> /dev/null | grep 11499
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes unit test, koha-qa.pl
Bug 11499: (regression tests) indexing modes not properly set on generated koha-conf.xml
t/db_dependent/Search.t creates its own temporary koha-conf.xml and
related files, and it fails to properly set indexing modes for
bibliographic and authority records.
The test should fail unless the main page is applied.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7b1d49f84b17ef779fac8ab6874bf2d34037aaba) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Chris Cormack [Fri, 27 Dec 2013 06:06:34 +0000 (19:06 +1300)]
Bug 7965: Silence warns in staff log
Silence warns in C4::Bookseller::GetBooksellersWithLateOrders()
to test
1/ run prove t/db_dependent/Bookseller.t
Notice lots of Use of uninitialized value $delay in numeric lt (<) at /var/lib/jenkins/jobs/Koha_master/workspace/C4/Bookseller.pm line 134 type lines
2/ apply patch
3/ run prove t/db_dependent/Bookseller.t
Notice warns are gone
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tiny change, positive consequences.
Passes QA script and all tests.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit febd0312f8623c9861bd70dd61aa3fd47afb1b51) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Chris Cormack [Thu, 2 Jan 2014 04:15:56 +0000 (17:15 +1300)]
Bug 11457: avoid spurious test failure in t/db_dependent/Bookseller.t
This patch clears the subscription table so tests pass correctly if
there happens to have been a subscription with an end date before
2013-08-01.
To test
1/ Add a subscription in the serials module, with an end date before
2013-08-01
2/ run prove -v t/db_dependent/Bookseller.t
Notice tests 22 and 23 fail
3/ Apply patch
4/ run test again
5/ Notice tests succeed
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests now clean the subscription table before running
the tests, so that the will always pass.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 8209bf10269c36c1bb8d4b2da23fe356ab7a3568) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Katrin Fischer [Sun, 17 Nov 2013 21:58:52 +0000 (22:58 +0100)]
Bug 11260: Follow up - normalizing frequencies in English sample file a bit
After some discussion in IRC I am throwing in some changes for the
English sample frequencies:
- Change Vol to Vol.
- Change No to No.
We had both forms in the file, now it should be consistent.
To test:
- Run English web installer installing all sample files, especially
frequencies
- Check installed frequencies
- Check available options creating a subscription
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 66bf3abf78a7537201fd54be7b58fbab4c716b40) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Katrin Fischer [Sun, 17 Nov 2013 21:56:45 +0000 (22:56 +0100)]
Bug 11260: Update German web installer - frequencies and numberpatterns
Translates the new files for frequencies and numberpatterns
To test:
- Run the German web installer with all sample files
- Check all files import without errors, especially frequencies and
numbering patterns
- Check frequencies in serials
- Check numbering patterns in serials
- Create a subscription, check possible choices
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit fff04e59e785ce26f52da94730818c541476f7bb) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Katrin Fischer [Sun, 17 Nov 2013 20:05:45 +0000 (21:05 +0100)]
Bug 11260: Update German web installer for 3.14
Mandatory:
- adds auth_values.sql and .txt with YES_NO referenced in patron_attributes.sql
- updates sample notices with redone slip templates (ISSUESLIP, ISSUEQSLIP,
RESERVSLIP, TRANSFERSLIP)
- adds German translations to subtag_registry.sql and copies updated file
from en to de-DE
- adds translation for new course_reserves permission to userflags.sql
- adds translations for new permissions in userpermissions.sql
- Fixes typo IndependantBranches in English userpermissions.sql
Optional:
- adds csv_profiles.sql and translation of the serial claims profile
- adds z39.50 servers for authorities to sample_z3950_servers.sql
To test:
- Run web installer in English
- check all sample files, make sure they all install without SQL errors
- check language list on advanced search displays correctly still
- check area/language list on tools > news displays correctly still
- check permissions for correct spelling of IndependentBranches
- Run web installer in German
- repeat checks from above
- also check: authorised values, especially existence of YES_NO
- all permissions are translated now
- slip notices are all there and look right
- new z39.50 servers for authorities are available
- csv profile for serial claims is available and works as expected
... and anything else you can think of.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit bbe64974b02d78fc916f76408a995ac1bf7f6228) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Galen Charlton [Mon, 6 Jan 2014 16:27:17 +0000 (16:27 +0000)]
Bug 6886: (follow-up) remove redundant test for singleBranchMode
This patch removes an unnecessary check of the singleBranchMode
preference that occurred in an <xsl:otherwise> clause where
we already know that singleBranchMode != 1.
Kyle M Hall [Fri, 4 Jan 2013 18:40:33 +0000 (13:40 -0500)]
Bug 6886: ensure that singleBranchMode does not display library name for reference copies
Test plan: Enable singleBranchMode and OPACXSLTResultsDisplay. Perform
a search in the OPAC which returns results containing not-for-loan
items. Before the patch these items will show their library in search
results loan items. After the patch there will be not be a library
listed, matching other items in results.
Fridolyn SOMERS [Fri, 7 Jun 2013 12:55:18 +0000 (14:55 +0200)]
Bug 10429: improve display of library and library filter on serials claim page
In serial claims page, the library code is displayed in table instead
of library name and library filter does not work.
This patch adds the display of library name by using libraries template
plugin. It changes the Javascript library filter to make it work.
Also sets "all" filter in template (like status filter) to allow
translation and sets "all" as selected by default. The staff user's
library was selected by default, but the table was not filtered
with it.
Test plan :
- Go to serials claim of a vendor with serials of multiple libraries
=> You see branch filter with "(All)" and table shows library's names
- Check that library filter does its work
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Table now shows the branch name instead of the branchcode.
First option was named (All), matching the status pull down.
When opening the claims page, (All) is preselected and the
result list matches with the selection. Before the patch
the library was preselected, but the result list did show
late issues from all branches.
This patch is an improvement, but there is still more work to do.
- Filters are not cumulative, but when another filter is selected
the first filter is not reset.
- It's not possible to combine
2 or more filters.
Kyle M Hall [Thu, 5 Dec 2013 14:13:35 +0000 (09:13 -0500)]
Bug 11342: fix error in OPAC self registration form if BorrowersTitles is empty
If BorrowersTitles is empty, it causes the library pulldown on the self
registration page to be empty, and to have the "Saluation" field have
the option "branches".
This patch also fixes a minor string capitalization issue.
Test Plan:
1) Enable OPAC self registration
2) Set the system preference BorrowersTitles to be empty
3) View the self registration page
4) Note the lack of branches in the home library pulldown
5) Apply this patch
6) Note the branches now display in the pulldown
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested in bootstrap and prog OPAC, with BorrowersTitle configured
and emptied.
Passes all tests and QA script.
Note: The titles pull down has 2 empty entries in master with
and without the patch.
Mark Tompsett [Wed, 27 Nov 2013 18:16:56 +0000 (13:16 -0500)]
Bug 11316 - plugin icon missing tooltip in addbiblio.pl
By adding:
title=\"Tag editor\"
into the HTML generated in addbiblio, a tooltip displaying
'Tag editor' appears when the mouse is hovered over the
plugin icon.
Test Plan:
1) Log into Staff client
2) Click the 'Search the catalog' tab
3) Type something which will generate results
4) Click the title of a result
5) Click the 'Edit' button
6) Scroll down and click the 'Edit Record'
7) Look through the various tabs and notice that all the plugin
icons have no tooltip.
8) Apply the patch
9) Refresh the page
10) All the plugin icons should have the tooltip text of
'Tag editor'.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds a title attribute. Works as described.
Galen Charlton [Thu, 2 Jan 2014 18:02:17 +0000 (18:02 +0000)]
Bug 11470: fix occassional spurious test failure in Circulation_transfers.t
This patch makes Circulation_transfers.t no longer be sensitive to
the exact time it runs, avoiding spurious test failures due
to datesent being a second off between the creation of the test
transfer and the comparison.
To test:
[1] To simulate the failure, add a "sleep(2);" after the
"#Test GetTransfers" comment and run
prove -v t/db_dependent/Circulation_transfers.t
[2] Remove the sleep and apply the patch.
[3] Verify that prove -v t/db_dependent/Circulation_transfers.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Galen Charlton [Mon, 6 Jan 2014 16:16:22 +0000 (16:16 +0000)]
Bug 11336: (follow-up) fix typo in previous follow-up
This patch corrects a typo that broken ModReserveFill(). This
patch also adds a unit test that (via two levels of indirection)
exercises ModReserveFill().
Galen Charlton [Sat, 4 Jan 2014 23:25:25 +0000 (23:25 +0000)]
Bug 11336: (follow-up) improve POD for _FixPriority()
This patch improves the POD for C4::Reserves::_FixPriority()
to (hopefully) describe its function thoroughly. It also
adjusts the call of _FixPriority() by CancelReserve() to
omit passing reserve_id, since by that point no row in
the reserves table for that request still exists.
Jonathan Druart [Fri, 13 Dec 2013 16:42:55 +0000 (17:42 +0100)]
Bug 11336: update hold queue priorities correctly when deleting holds
In various places, deleting a hold request did not trigger recalculating
the priority of the other holds on the bib:
To reproduce the bug:
- select or create 2 users U1 and U2
- select or create an holdable item
- place on hold for both U1 and U2. U1 has priority 1 and U2 has
priority 2.
- delete the hold for U1
- go on circ/circulation.pl?borrowernumber=XXXX for U2 (or in the DB
directly) and verify the priority has not been set to 1
The issue is repeatable (at least) on these 2 pages:
* circ/circulation.pl?borrowernumber=XXXX (tab 'Holds', select "yes"
in the dropdown list and submit the form)
* reserve/request.pl?biblionumber=XXXX (click on the red cross)
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reran my tests:
Preparations:
- Create holds for different patrons on a record:
* 1st - title level hold
* 2nd - item level hold
* 3rd - title level hold
* 4th - title level hold
- AllowOnShelfHolds = On/Allow (items were not checked out)
Tests:
Deleted holds from various pages, confirming bugs first,
then testing with applied patches. Reloading database
after each test.
1) Cancel holds from OPAC patron account
/cgi-bin/koha/opac-user.pl#opac-user-holds
- Cancel 4th - ok, before and after applying the patch
- Cancel 2nd - ok, after applying the patch
2) Cancel hold from holds tab on staff detail page
/cgi-bin/koha/reserve/request.pl?biblionumber=7
a) Setting priority to 'del', submitting with 'Update holds'
- Cancel first (1st) - ok, before and after
- Cancel hold in the middle (was 3rd) - ok, before and after
- Cancel last (was 4th) -ok, before and after
b) Using red X
- Repeating tests from a) - before the patch is applied holds
get totally 'out of order' - after applying the patch, it works
correctly
Additional tests done on this page:
- Change priority using up, down, to top, to bottom icons
- Change priority with 'toggle to lowest'
3) Cancel hold from the patron's account
a) Check out tab - Delete? Yes, 'Cancel marked holds'
/cgi-bin/koha/circ/circulation.pl?borrowernumber=X
- Cancel first (1st) - ok, after applying the patch
- Cancel hold in the middle (was 3rd) - ok, after applying the patch
- Cancel last (was 4th) - ok, after applying the patch
b) Details tab - Delete? yes, 'Cancel marked holds'
/cgi-bin/koha/members/moremember.pl?borrowernumber=X
- Cancel first (1st) - ok, after applying the patch
- Cancel hold in the middle (was 3rd) - ok, after applying the patch
- Cancel last (was 4th) - ok, after applying the patch
Without the patch, holds priorities get out of order.
Additional tests done:
- Check in one item to trigger first hold
- Check in one item to trigger second hold
- Check out first item
Priorities are kept while the item is waiting, when it's
checked out, priorities of remaining holds get reset correctly.
Conclusion:
Big improvement, no regressions found.
Passes all tests in t, xt and QA script.
Also: t/db_dependent/Holds.t
t/db_dependent/HoldsQueue.t
t/db_dependent/Reserves.t
Mathieu Saby [Sun, 3 Nov 2013 18:04:44 +0000 (19:04 +0100)]
Bug 11192: Fix lf and ff07-02 definition in ccl.properties
ff7-02 1=87020 (position 2 of field 007 in MARC21) should be
ff7-02 1=8702
lf 1=8833
lf fiction
fic fiction
should be
lf 1=8833
fiction lf
fic lf
To test :
1. apply the patch
2. copy the modified ccl.properties into your active Zebra config
directory
3. reindex zebra (rebuild_zebra.pl -b -x -r -v)
4. make some searches using the fixed indexes
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit a032b0a5cd73c9a67bab130c183751309fa95c6e) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Wed, 6 Nov 2013 13:54:36 +0000 (14:54 +0100)]
Bug 11208: If no smsalertnumber is defined, the message is marked as failed
For DUE message (and PREDUE, etc.) there are no check before sending the
message to the message_queue table.
This check avoids to try to send again and again the same message. Now
it is marked as "failed".
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Without the patch a sms notice will remain as 'pending' forever.
With the patch applied, the status is set to 'failed'.
Galen Charlton [Mon, 30 Dec 2013 16:45:45 +0000 (16:45 +0000)]
Bug 11208: regression test for failing SMS messages
This patch adds a regression test for verifying that queued
SMS messages meant for patrons who have no SMS alert number
set are marked as failed after the first attempt to send them.
To test:
[1] Run prove -v t/db_dependent/Letters.t. The fourth
test should.
[2] Apply the main patch and run t/db_dependent/Letters.t
again. This time, all tests should pass.
Bug 10896: Add a --verbose option to koha-translate
The -v and --verbose option switches add the --verbose switch to the
misc/translator/translate script call in the packages' 'koha-translate'
command.
The docs are updated accordingly.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as expected with and without -v. Man page looks good.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit cfc3ce6772b908bb73a38a3bb778b8f25bb4ac9e) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The koha-translate's usage message has a couple of inconsistencies:
'--all' should be '--available'
and '--help' is missing from the usage examples.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested using instructions on
http://wiki.koha-community.org/wiki/Testing_man_pages
Bug 11509: improve usage information printed by koha-create
This patch makes koha-create print better and more descriptive usage
information. Also adds the --help and -h switches.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Removed trailing " from:
$scriptname [db usage mode] [options] instancename"
Galen Charlton [Thu, 30 Jan 2014 15:48:48 +0000 (15:48 +0000)]
Bug 11439: (follow-up) adjust for change in list returned by OCLC XISBN
The set of related ISBNs for the first Harry Potter book returned
by OCLC's XISBN service has changed recently, so this patch adjusts
the test to match.
Bug 9579: fix truncation of facets containing multi-byte characters
We seem to be relying on whatever Zoom::Results->render return, and
Perl doesn't explicitly consider it UNICODE data. That's why CORE::substr
(and probably CORE::length too) cut the bytes wrong.
This patch just decodes the UTF-8 data that render() returns and then
Perl behaves, heh.
It uses Encode::decode_utf8 which is already a dependency for the current
stable Koha releases.
REVISED TEST PLAN
-----------------
1) Import the attached sample records.
2) Rebuild your indexes
3) In OPAC search for يكيمكتبات : قبسي ، كرم
-- There will be ugly diamonds with question marks in the facets
4) apply the patch
5) Search again.
-- The names will be properly truncated.
NOTE: This test assumes FacetLabelTruncationLength = 20.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described, tested with several German, English and
the Arabic test record. Arabic strings now display correctly
and no regression was found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
I've reviewed it and approve its inclusion in 3.14.x and earlier. I
will use the patches for bug 11096, once they pass QA, for the master
branch.
projects / koha.git / log