Julian Maurice [Mon, 15 Oct 2012 12:06:04 +0000 (14:06 +0200)]
Bug 8918: Fix reserve priority in ILS-DI
The priority of new hold requests was not calculated when using ILS-DI.
A new routine is added, C4::Reserves::CalculatePriority(), to calculate
the priority prior to placing a request.
A separate bug report, 11640, covers the changes in reserves to
use this new routine more generally.
This patch does therefore only affect ILS-DI.
Note: ILS-DI already allows you to generate multiple holds on a biblio or
item for the same patron. This patch does not change that behavior.
Test plan:
[1] Place multiple holds using ILS-DI HoldTitle service:
/cgi-bin/koha/ilsdi.pl?service=HoldTitle&patron_id=BORROWERNUMBER&bib_id=BIBLIONUMBER&request_location=test
Check the priority.
[2] Do the same using HoldItem service:
/cgi-bin/koha/ilsdi.pl?service=HoldItem&patron_id=BORROWERNUMBER&bib_id=BIBLIONUMBER&item_id=ITEMNUMBER
Check the priority again.
[3] Use a biblio with multiple items. Place item level holds on both.
Check in one of these items in another branch. Confirm transfer.
Check in the other item in the original branch. Confirm hold.
Now you have a waiting and a transit hold.
Test HoldTitle and HoldItem service again a few times.
[4] Enable AllowHoldDateInFuture and add a future hold.
Now test HoldTitle and HoldItem again and check if these holds are
inserted before the future hold (lower priority).
January 29, 2014: Rebased this patch and amended it to make a distinction
between fixing the ILS-DI bug and using the new routine.
Updated commit message and test plan (marcelr).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 3e344d7e0718e5a8ac810ca5235f68c1e6d3f370) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Mark Tompsett [Mon, 21 Apr 2014 01:13:26 +0000 (21:13 -0400)]
Bug 12115: follow-up fix for tools/inventory's output_pref issues
This should correct issues with the output_prefs in the
compareinv2bar logic section of tools/inventory.pl
It is a follow up to bug 11253.
TEST PLAN
---------
NOTE: There should be no distinguishable difference before and
after the patch. This corrects a works by accident bug.
Back up DB.
Create a small barcode file from books in a given branch.
Set I18N/L10N system preference of dateformat to mm/dd/yyyy.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Click submit just below the 'Use a barcode file' section.
All looks fine in mm/dd/yyyy format.
Set I18N/L10N system preference of dateformat to yyyy-mm-dd.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Click submit just below the 'Use a barcode file' section.
All looks fine in yyyy-mm-dd format.
Set I18N/L10N system preference of dateformat to dd/mm/yyyy.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Click submit just below the 'Use a barcode file' section.
All looks fine in dd/mm/yyyy format.
Apply patch
Restore DB (so results should be comparable to the first result)
Repeat the three testing blocks above.
There should be no visible difference.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 40378d4a13e9d89bd84da90e9b6c0c5a237af1ef) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Mark Tompsett [Tue, 18 Mar 2014 15:44:42 +0000 (11:44 -0400)]
Bug 11253: tools/inventory.pl: fix handling of inventory date
This patch fixes a stray call to output_pref() that had not been
updated by the patch for 10380, which caused a crash when uploading
a barcode file when the dd/mm/yyyy dateformat is in use.
TEST PLAN
---------
Set I18N/L10N system preference of dateformat to dd/mm/yyyy.
Go to inventory/stocktaking tool.
Browse for the barcode file.
Select the branch (i.e. not All libraries) to match.
Click submit
KABOOM!
Apply patch
Go to inventory/stocktaking tool.
Browse for the barcode file.
Select the branch (i.e. not All libraries) to match.
Click submit
Table displays dates in "Unseen since" column.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Before the patch, I had this error when using dateformat=ddmmyy:
Template process failed: undef error - The 'day' parameter ("2014") to DateTime::new did not pass the 'an integer which is a possible valid day of month' callback at /usr/local/share/perl5/Params/Validate/PP.pm line 633.
This patch corrects the problem.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Confirmed problem before applying the patch. Tested with the
patch all dateformat setting still work correctly.
Owen Leonard [Thu, 20 Feb 2014 16:38:53 +0000 (11:38 -0500)]
Bug 11794 - restore functioning of opacSerialDefaultTab
The opacSerialDefaultTab system preference should control whether to
show the holdings or subscriptions tab by default on the detail page for
a serial. This behavior was broken when we last updated jQueryUI because
of a change in the jQueryUI active tab class name.
This patch corrects the class on the detail page and removes the old
class from the authorities detail page (where it was unnecessary
anyway).
To test, view a serial record in the OPAC under various settings of the
opacSerialDefaultTab preference. The default tab should correctly follow
the preference.
Test in prog and Bootstrap themes.
Edit: Rebased on current master. Note that the change to
opac-auth-detail.tt is because the page never has more than one tab,
hence doesn't need the "active" designation.
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested in prog and bootstrap.
All tests and QA script pass.
Owen Leonard [Thu, 20 Feb 2014 20:18:46 +0000 (15:18 -0500)]
Bug 11328 - Show local cover images in staff client search results
Local cover images do not appear in staff client search results. This
patch adds them.
To test, enable the LocalCoverImages system preference and add at least
one cover image to a title. Perform a search which will return results
that include your title. Confirm that the local cover image is
displayed.
Search results should also display correctly with and without
AmazonCoverImages enabled as well as with LocalCoverImages disabled.
Galen Charlton [Mon, 10 Mar 2014 14:57:17 +0000 (14:57 +0000)]
Bug 11866: (follow-up) repair security issue introduced by main patch
The main patch allows /any/ user with an account on the Koha system
to view the staff-side course-reserves home page -- including ordinary
patrons. This patch repairs the oversight.
Kyle M Hall [Thu, 27 Feb 2014 13:55:22 +0000 (08:55 -0500)]
Bug 11866: do not require special permissions to view course reserves in staff interface
A librarian with no course reserves permissions cannot view course
reserves from the staff intranet, yet can from the OPAC. This doesn't
make much sense. Librarians should not require any course reserves
permissions to view courses and reserves from the staff intranet.
Test Plan:
1) Log into staff intranet as a librarian with no course reserves
permissions
2) Note you cannot view course reserves
3) Apply this patch
4) Note you can now view course reserves
5) Verify you cannot modify courses or course reserves
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 11866 [Follow-up] Staff side course reserves too restrictive
This follow-up patch adds a check for the "UseCourseReserves" system
preference to the display of the Course reserves menu item in the
header.
To test, view the "More" menu with the "UseCourseReserves" system
preference on and off. The menu item should appear and disappear
accordingly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 9e5fcb0d5dd230946719ee4825a3d41bd18effe7) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 7234: koha-common Debian package now includes koha-sites.conf
This patch adds a sample koha-sites.conf file, which will be
included by the koha-common package in /etc/koha (where it belongs).
It is fixed to include the current defaults (DOM indexing for both
biblios and authorities, disabled use of memcached, and good defaults
for a normal setup if enabled).
All options are commented for ease of use by average users.
To test
- verify that the defaults are sane (let me know if it needs to be
fixed).
- build the package and verify that the file gets installed.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 9ca12df4a006901b1f4710f364e3acc0259e46a1) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Marcel de Rooy [Wed, 19 Feb 2014 12:58:00 +0000 (13:58 +0100)]
Bug 11078: QA Follow-up for missing file permissions on lockfile
The original patch creates a lockfile in the ZEBRA_LOCKDIR.
It can fall back to /var/lock or even /tmp.
If the create fails, it dies. This can be considered as very
exceptional.
This followup adjusts the fallback location in /var/lock or /tmp
slightly. It appends the database name to the folder in order to
prevent interfering between multiple Koha instances. Creation of the
lockfile has been moved to a subroutine extending directory and file
creation testing.
In the very unlikely case that we cannot create the lockfile (after
three separate tries), this follow-up allows you to continue instead
of die. This is just as we did before we had file locking here. Every
time skipping a reindex could cause more harm than continuing and
having the race condition once in a while.
Test plan:
Test adding and removing lockdir from your koha-conf.xml. Check fallback.
Note that fallback in /var/lock or /tmp must contain database name.
Remove the lockdir config line and remove permissions from fallback. In
this case the reindex should continue but with a warning.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with daemon and one-off invocation simultaneously.
Tested new wait parameter.
Tried all variations of lock directory (changing permissions etc.)
Doug Kingston [Wed, 19 Feb 2014 06:56:58 +0000 (22:56 -0800)]
Bug 11078: Add locking to rebuild_zebra
This patch adds locking to rebuild_zebra.pl to ensure that simultaneous
changes are prevented (as one is likely to overwrite the other).
Incremental updates in daemon mode will skipped if the lock is busy
and they will be picked up on the next pass. Non-daemon mode
invocations will also exit immediately if they cannot get the lock
unless the new flag -wait-for-lock is specified, in which case they
will wait until the get the lock and then proceed.
Supporting changes made to Makefile.PL and templates for the new
locking directory (paralleling the other zebra lock directories).
We stash the zebra_lockdir in koha-conf.xml so rebuild_zebra.pl
can find it.
To address earlier QA concerns we:
1. added code to check if flock is available and ignore locking if
it's missing (from M. de Rooy)
2. changed default for adhoc invocations to abort if they cannot
obtain the lock. Added option -wait-for-lock if the user prefers
to wait until the lock is free, and then continue processing.
3. added missing entry to t/db_dependent/zebra_config.pl
4. added a fallback locking directory of /tmp
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Doug merged the original patch with the QA changes.
Just for the record, noting here that the original patch was tested
extensively too by Martin Renvoize.
I have added a followup for some exceptional cases.
Jacek Ablewicz [Thu, 20 Feb 2014 08:53:23 +0000 (09:53 +0100)]
Bug 11798: fix problems with column sorting and row visibility in invoices table
1) Sorting on "Billing date" (functionality introduced by bug 10794)
doesn't work properly any longer after bug 10401 was pushed (another
side-effect being that "Vendor" column is currently not sortable
at all).
2) Only "top ten" invoices are always displayed in the table, and it's
not possible to change that without missing top/bottom DataTables
pagination bars.
This patch fixes sorting for "Billing date" & "Vendor" columns
in invoices table and restores the ability to see all table
rows/search results (not just "top ten").
Test plan (you'll need to have 11+ invoices with various billing
dates entered in the system):
1) apply patch,
2) view the Acquisitions invoices page (acqui/invoices.pl), do some
search (= as broad search as possible) and confirm that "Billing
date" and "Vendor" columns now do sort correctly,
3) in situations when there are more than 10 search results, they
should all be visible in the invoices table.
NOTE: Generating invoices is a painfully convoluted mess.
All my "Billing date" entries were blank, so was not
able to confirm Billing date issues. However, Vendor
sorting issues, seeing more than 10, and in my bizarre
initial case the non-visible checkboxes were all fixed.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 4ce0848fe35814f2324a8e3d59b3c04f061a858b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Mon, 24 Feb 2014 15:21:20 +0000 (10:21 -0500)]
Bug 11829: fix JavaScript error on staff client biblio details pages if template variables are undefined
The JavaScript included in cat-toolbar.inc expects several variables to
be passed to the template for use in calculations. Several scripts
do not pass the required variables to the template, leading to a JS
error.
This patch re-adds (See Bug 9823) hold count calculation to the required
scripts and copies the acquisitions-related count calculation from
detail.pl into related bibliographic detail scripts so that the
commonly-included cat-toolbar.inc can receive correct values.
To test, locate a bibliographic record which has no holds and is not
used in a current or deleted order, but which has a local cover image
attached. Check the following views to confirm there is no JavaScript
error:
- Normal
- MARC
- Labeled MARC
- ISBD
- Items
- Images (from the Images tab on the "Normal" detail page)
Next, locate a bibliographic record with no items attached which is used
in an Acquisitions order. On each of the pages listed above, choose
"Delete record" from the Edit menu. This should trigger a warning that
the record is used in an order. Cancel the deletion.
Finally, delete the order which references the bibliographic record. On
each of the pages listed above, choose "Delete record" again. This
should trigger a warning that the record is used in a deleted order.
Cancel the deletion.
I went through the test plan, everything works OK.
It resolves Bug 11831 as well.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- Printing from MARC and ISBD view works again
- No more Javascript errors found
- Deleting a record with attached order gives the correct warning,
both for ordered and cancelled.
Marcel de Rooy [Fri, 24 Jan 2014 08:59:03 +0000 (09:59 +0100)]
Bug 9823: QA follow-up for GetReservesFromBiblionumber calls
The template params holds and holdcount are not used in the ISBD template.
Removed the associated code from catalogue/ISBDdetail.pl.
Same applies for catalogue/MARCdetail.pl and labeledMARCdetail.pl.
Same applies also for catalogue/imageviewer.pl.
Same applies also for catalogue/moredetail.pl.
In catalogue detail.tt only the number of holds is used. Removed the code
that passed the holds array to the template.
For consistency opac-detail should also incorporate future holds into its
holds count; added the all_dates parameter for that reason.
The Reserves module is no longer needed in moredetail. Removed it. Checked
the other scripts also.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit e536fd087d540065d2ccbe12925695bb770d4314)
Jonathan Druart [Mon, 18 Mar 2013 14:37:18 +0000 (14:37 +0000)]
Bug 9823: Refactor return from GetReservesFromBiblionumber
The return from GetReservesFromBiblionumber contains an unnecessary
extra variable. In scalar context an array returns its element count.
Maintaining a separate count can lead to unforeseen bugs
and imposes ugly constructions on the subroutine's users.
Remove the useless count variable from the return
This patch also changes the parameters: now the routine takes a hashref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Placed biblio holds, future holds and item holds. Works as expected.
Tested Holds.t and Reserves.t. Pass.
Tested /cgi-bin/koha/ilsdi.pl?service=GetRecords&id=999 with two holds on
one item. Fine.
C4/SIP/ILS/Item.pm: Looked for "whatever" and "arrayref" and could not find
them anymore. Looks good.
Handled a few unneeded calls in QA follow-up.
Left only one point to-do for serials/routing-preview.pl. See Bugzilla.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 8b685c1e80db99f24d3ee965b8f8d2badb243153)
Owen Leonard [Thu, 20 Feb 2014 20:42:37 +0000 (15:42 -0500)]
Bug 11805 - Use validation plugin when creating new basket in Acquisitions
The page for adding a new basket in Acquisitions includes some custom
form validation JavaScript which can be removed in favor of HTML5
validation attributes and Koha's built-in validation plugin. This patch
does so.
To test, apply the patch and go to Acquisitions -> Choose a vendor ->
New basket. Try submitting the form without entering a basket name. This
should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing basket should also work correctly.
Patch works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes all tests and QA script.
Tried adding a new basket with/without basket name and editing
an existing basket editing/emptying the basket name.
Owen Leonard [Mon, 10 Feb 2014 19:13:11 +0000 (14:13 -0500)]
Bug 11736 - Use new DataTables include in Koha news templates
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to the Koha
news page.
To test you should have existing news items with varying creation and
expiration dates. Apply the patch and confirm that table sorting works
correctly for all settings of the dateformat system preference.
C4::NewsChannels.pm has been modified so that it now passes an
unformatted date to the template, where the KohaDates plugin is used to
apply the correct formatting. Sorting is based on the unformatted date.
Also corrected: Capitalization errors.
Signed-off-by: wajasu <matted-34813@mypacks.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Also passes tests and QA script.
Owen Leonard [Fri, 7 Feb 2014 19:54:27 +0000 (14:54 -0500)]
Bug 11716 - Use new DataTables include in label manage template
This patch modifies the template for the label manage pages to use
the new DataTables include. This simplifies the inclusion of assets and
updates to the latest DataTables version.
To test, view the following pages and confirm that table sorting is
working correctly:
Owen Leonard [Fri, 7 Feb 2014 16:35:17 +0000 (11:35 -0500)]
Bug 11710 - Use new DataTables include in cataloging Z39.50 search template
This patch modifies the template for the cataloging Z39.50 search
template to use the new DataTables include. This simplifies the
inclusion of assets and updates to the latest DataTables version.
To test, go to cataloging and choose "New from Z39.50." Perform a search
and confirm that table sorting still works correctly.
Signed-off-by: wajasu <matted-34813@mypacks.net> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 18d5f288040fdf2d2b65b569685d60a11d3b86fc) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Fri, 7 Feb 2014 20:24:06 +0000 (15:24 -0500)]
Bug 11717 - Use new DataTables include in member templates
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to all
member pages which use DataTables.
Apply the patch and test the following pages to confirm that table
sorting works correctly:
- Patron details (members/moremember.pl)
- The checkouts, relatives' checkouts, and holds tables have been
modified to exclude articles when sorting of titles.
- Notices (members/notices.pl)
- Circulation history (members/readingrec.pl)
- Statistics (members/statistics.pl)
- Update child to adult patron (members/update-child.pl) - This is the
page which appears in a pop-up when you update a child patron to an
adult (from the "More" menu in the toolbar when viewing patron
details).
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit a31bf519a9aff560f3157ad7821be3a0afe3d98f) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Fri, 21 Feb 2014 19:52:22 +0000 (14:52 -0500)]
Bug 11819 - Don't show catalog edit menu if user has no edit permissions
Currently if the logged in user lacks any cataloging permissions the
bibliographic detail page (catalogue/detail.pl) still shows the Edit
button, but with an empty dropdown menu. This patch corrects the toolbar
include so that the button will not appear at all.
To test, view the biblio detail page as a user with various combinations
of the following permissions:
The edit button should appear with the correct set of links when the
user has any combination of the above permissions. If user has none the
button should not appear.
Followed test plan, patch behaves as expected Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes all tests and QA script.
Template only change.
Fridolin Somers [Fri, 7 Feb 2014 09:13:39 +0000 (10:13 +0100)]
Bug 11707: fix editing additional attributes for patron whose category code includes a space
When editing additional attributes of a patron of a category with a
code with space (ie "CAT 3"), the Javascript is broken and Additional
attributes are not displayed.
This patch corrects by adding simple quotes around category code in JS
code.
Test plan :
- Create an patron additional attribute
- Create a new patron category with a space in code. ie "CAT 3"
- Create a new patron of this category : /cgi-bin/koha/members/memberentry.pl?op=add&categorycode=CAT 3
=> Without patch the JS is broken (Syntax error, unrecognized expression:
[data-category_code=CAT 3]) and additional attributes are not
displayed.
=> With patch the JS is not broken and additional attributes are
displayed and can be edited.
Signed-off-by: Marc Véron <veron@veron.ch>
In current Koha version it is not possible to create category codes
with blanks.
To test, I changed an existing category code directly in the database.
Then I followed the Test plan.
Without patch, attribute types were not displayed.
With patch, they were displayed as expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I recommend not using codes with spaces and fix existing ones.
Koha doesn't allow you to add category codes with spaces, so the only way
to do it is via SQL.
This patch fixes a problem and passes all tests.
Owen Leonard [Fri, 21 Feb 2014 14:22:50 +0000 (09:22 -0500)]
Bug 10751: standardize validation of title in staff purchase suggestions form
The form for adding a new purchase suggestion in the staff client
indicates that the title field is required but does nothing to enforce
this rule. This can be handled client-side with HTML5 validation
attributes and Koha's built-in validation plugin. This patch implements
this.
To test, apply the patch and go to Acquisitions ->
Suggestions -> New purchase suggestion. Try submitting the form without
entering a title. Doing so should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing suggestion should also work correctly.
The patch displays a message 'Required' near the title field.
After submitting a empty title it changes to 'This field is required' Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
The title field is required since commit d565fb02e9fca2ac9c506e4e7d44fd8b0d66f06a
This one makes it more consistent with formatting. It makes sense.
Marcel de Rooy [Thu, 20 Feb 2014 18:39:10 +0000 (19:39 +0100)]
Bug 11803: use $dbh consistently in _koha_modify_item
This is just some code cleanup, no behavior change expected.
Also replacing errstr with err in testing the results. (See DBI.)
Test plan:
Modify an item and save it.
Followed test plan. No problems found. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit a07b32f4f9090ba0c50c3e510f0be56b8805faeb) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Tue, 18 Feb 2014 20:37:31 +0000 (15:37 -0500)]
Bug 11789 - Use validation plugin when creating new list
The page for adding a new list includes some custom form validation
JavaScript which can be removed in favor of HTML5 validation attributes
and Koha's built-in validation plugin. This patch does so.
Other edits: Minor validation fixes.
To test, apply the patch and go to Lists -> New list. Try submitting the
form without entering a list name. This should trigger a validation
warning.
Submission of the form with valid data should work correctly. Editing an
existing list should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 4677bb52616794457f616571479aab6425be75f9) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Tue, 18 Feb 2014 14:07:38 +0000 (15:07 +0100)]
Bug 11471: Display the currency for baskets in a basketgroup
On editing a basketgroup, the currency for baskets in a basketgroup is
always '0'.
With this patch, the currency is correctly displayed.
TEST PLAN
=========
1) Log into staff client
2) Acquisitions
3) Click 'Search' in the 'Manage orders' box
4) Click '+ New basket' because a vendor name
5) Type 'Test Basket' into basket name
6) Click 'Save'
7) Click 'Add to basket'
8) Click 'From an external source'
9) Type 'Green Eggs and Ham' into the Title text box
10) Click 'Search'
11) Click 'Order' on any one of the results
12) Click 'Add Item' in the 'Item' box
13) Select a Fund from the dropdown in the
'Accounting details' box
14) Click 'Save'
15) Click 'Close the basket'
16) Click 'Yes, close (Y)' without checking attach to a
basket group
17) Click the 'Basket groups' tab
18) Click '+ New basket group'
19) Notice the listing in the 'Ungrouped baskets'.
20) Drag and drop the entry into the 'Baskets in this group'
text area
21) Click 'Save'
22) Click 'Edit'
23) Notice it displays incorrectly. (e.g. Total: 0 0)
24) Apply the patch (git bz apply 11471)
25) Refresh the page
26) Notice it displays the currency correctly. (e.g. Total: 0 USD)
NOTE: If there is a space issue, see Bug 9654.
This can be applied separately from that bug.
27) Run the Koha QA Tool: (~/qa-test-tools/koha-qa.pl -v 2 -c 1)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7a2dec05eddc979b5a957a651e393838c13560c4) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Conflicts:
acqui/basketgroup.pl
Marcel de Rooy [Thu, 20 Feb 2014 11:54:32 +0000 (12:54 +0100)]
Bug 11799: Housekeeping: Remove _biblionumber_sth from VirtualShelves.pm
This routine is no longer used.
Test plan:
Do a grep on the name.
(Bonus points:) Verify if you can perform some actions on lists.
No more occurences of _biblionumber_sth found Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5e0d450875f24d1f9ef6620b033b5179633589da) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 10580: adjust Makefile.PL to reflect that Zebra no longer optional in Koha setup
Running Makefile.PL asks the user whether to install the Zebra
configuration files and different texts relate to the user having
chosen to use Zebra.
This patch removes references to choosing to use Zebra and removes
the related variables from the code.
To test:
- Apply the patch
- Go through the different install modes
- Verify that nothing nothing is broken
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 0b989fe0b2097d747da1fd6d04aa8aecc5652d06) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Wed, 15 Jan 2014 15:24:00 +0000 (16:24 +0100)]
Bug 11562: re-sort sysprefs.sql
The QA tools does not manage to catch error sorting on the sysprefs.sql
file if it is already badly sorted.
This patch tidies up the sysprefs file.
TEST PLAN
---------
[1] Verify that loading sysprefs.sql into an empty Koha
database (or one whose system preferences table is
is empty) works.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
RM note: I must point out that there ZERO functionality associated
with the order that system preferences occur in that SQL script; they are
sorted solely in an attempt to reduce the likelihood of merge conflicts
during the development process. Consequently, I dislike language that
suggests it is an "error" if sysprefs.sql happens to not be perfectly
sorted; it is at most an inconvenience.
Nicole C. Engard [Fri, 24 Jan 2014 15:47:53 +0000 (09:47 -0600)]
Bug 11272 - add second submit button to inventory form
The inventory tool allows for 2 ways of processing files. The first
is to upload a file. The second is to generate the shelf list.
Most libraries think they have to fill in all fields because the
submit button is at the bottom of the second option. They do not.
This patch adds a second submit button under the first method to
make this clearer.
To test:
* Generate a file of barcodes for inventorying
* Before applying the patch use the file upload method to mark as seen
* Apply the patch
* Use the file upload method to mark as seen using the new submit
* Repeat the above for the shelf list method
* Confirm that inventory still works as expected with 2 buttons
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 40ba1763afc40cd47b23892a3248fd877dc8edce) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Ketan Kulkarni [Thu, 21 Nov 2013 09:07:58 +0000 (14:37 +0530)]
Bug 11087: Make the Pay Fines tab the default tab
Since paying fines is the most likely action when clicking on
the Fines tab, the pay fines tab should be the default rather
than the account summary.
http://bugs.koha-community.org/show_bug.cgi?id=11087 Signed-off-by: Holger Meißner <h.meissner.82@web.de> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified by accessing the fines pages from the various
patron account pages.
Mathieu Saby [Sun, 26 Jan 2014 18:55:46 +0000 (19:55 +0100)]
Bug 11611: Rephrase description and examples of 5 MARC related sysprefs
This patch rephrases the description or examples of 5 sysprefs:
1/ MARCAuthorityControlField008: "MARC" -> "MARC21"
2/ itemcallnumber: "Examples" -> "Examples (for MARC21 records)"
3/ DefaultLanguageField008: "Range 35-37" -> "Range 35-37 of MARC21 records"
4/ MARCOrgCode: "new MARC records" -> "new MARC21 records"
5/ UNIMARCAuthorityField100 description: "Do NOT include the date
(position 00-05)." -> "position 08-35. Do NOT include the date
(position 00-07)."
It also adds description in SQL systempreferences table for
UNIMARCAuthorityField100, MARCAuthorityControlField008 and MARCOrgCode.
Test plan:
- Apply and run updatedatabase.pl
- Check the changes are taken into account in syspref administration
page
- Check the changes are taken into account in systempreferences table
(for UNIMARCAuthorityField100, MARCAuthorityControlField008 and
MARCOrgCode)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 68a7f7f4456078b1b9dc6fd1ba16f11ba45267fc) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Kyle M Hall [Wed, 19 Feb 2014 20:26:24 +0000 (15:26 -0500)]
Bug 11796: fix display of search result facets if facet happens to have exactly six entries
If a search gives results with 6 facets, one of those facets won't be
displayed. This is due to a bug in the code that only considers great
than 6 facets in one area, and less than 6 in another.
Test Plan:
1) Perform a search that should give results for 6 different libraries
2) Note you only see 5 libraries in the facets with no option to expand
3) Apply this patch
4) Repeat step 1
5) Note you now have the option to expand the facets list
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This patch should provide a regression test but I really don't know how
to write it.
Owen Leonard [Wed, 19 Feb 2014 16:36:30 +0000 (11:36 -0500)]
Bug 11791 - Use validation plugin when creating new city
The page for adding a new city includes some custom form
validation JavaScript which can be removed in favor of HTML5 validation
attributes and Koha's built-in validation plugin. This patch does so.
To test, apply the patch and go to Administration -> Cities -> New city.
Try submitting the form without entering a city or zip code. This should
trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing city should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Note: This patch changes the behavior. Before the patch, only 1 out of city
and zip was required. Now both are. Since the 2 inputs were marked as
required, I think they should be.
Owen Leonard [Wed, 19 Feb 2014 16:59:33 +0000 (11:59 -0500)]
Bug 11792 - Use validation plugin when creating new currency
The page for adding a new currency includes some custom form
validation JavaScript which can be removed in favor of HTML5 validation
attributes and Koha's built-in validation plugin. This patch does so.
To test, apply the patch and go to Administration -> Currencies &
Exchange rates -> New currency. Try submitting the form without entering
a currency, rate, and/or symbol. This should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing currency should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5dc093b30e8d949f39a67bf2ac40f219f6167d0a) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Wed, 19 Feb 2014 17:29:34 +0000 (12:29 -0500)]
Bug 11793 - Use validation plugin when creating new item type
The page for adding a new item type includes some custom form
validation JavaScript which can be removed in favor of HTML5 validation
attributes and Koha's built-in validation plugin. This patch does so.
To test, apply the patch and go to Administration -> Item types -> New
item type. Try submitting the form with the following error conditions:
- Missing item type
- Missing description
- A non-number in the "rental charge" field
These errors should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing item type should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 1d9b86aabccf1bc916b6b27e568ad984caf081f6) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Wed, 19 Feb 2014 18:05:19 +0000 (13:05 -0500)]
Bug 11795 - Use validation plugin when creating new Z39.50 server
The page for adding a new Z39.50 server includes some custom form
validation JavaScript which can be removed in favor of HTML5 validation
attributes and Koha's built-in validation plugin. This patch does so.
To test, apply the patch and go to Administration -> Z39.50 client
targets -> New Z39.50 server. Try submitting the form with any of the
following error conditions:
- Missing Z39.50 server name
- Missing hostname
- Missing port
- Non-numeric port
- Missing database
- Non-numeric rank
- Non-numeric timeout
These errors should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing
an existing Z39.50 server should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: replace tabs with spaces
Owen Leonard [Tue, 18 Feb 2014 20:26:30 +0000 (15:26 -0500)]
Bug 11788 - Use validation plugin when creating new course
The page for adding a new course includes some custom form
validation JavaScript which can be removed in favor of HTML5 validation
attributes and Koha's built-in validation plugin. This patch does so.
To test, apply the patch and go to Course reserves -> New course. Try
submitting the form without entering a department, course number,
and/or course name. This should trigger validation warnings.
Submission of the form with valid data should work correctly. Editing an
existing course should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 4e9b5110d90c3ac60c61f710ff5892b9720e643e) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Tue, 18 Feb 2014 19:52:26 +0000 (14:52 -0500)]
Bug 11787 - Use validation plugin when adding new vendor
The vendor entry form uses some custom JavaScript which can be removed
in favor of HTML5 validation attributes and Koha's built-in validation
plugin. This patch does so.
Also corrected: Minor validation issue.
To test, apply the patch and go to Acquisitions -> New vendor. Try
submitting the form without entering a vendor name. This should trigger
a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing vendor should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 03675fd55320f3a9bc3d4c7475bc3b9696920bd9) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Tue, 18 Feb 2014 17:13:39 +0000 (12:13 -0500)]
Bug 11785 - Use validation plugin when uploading local cover images
When uploading local cover images the form should not be submitted if
no file has been selected. The existing form validation script doesn't
work. This patch adds HTML5 validation attributes and use of Koha's
built-in form validation plugin.
To test, apply the patch and go to Tools -> Upload local cover image.
Try to submit the form without selecting a file to upload. You should be
prevented from doing so. Choose a file and confirm that the upload
completes correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7faff33c8b9bd670cf7813f4cefb7aee38709ebb) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Wed, 19 Feb 2014 20:06:36 +0000 (15:06 -0500)]
Bug 10714 [Follow-up] Redirect to list contents view upon cancel after initiating edit from list contents view (staff)
This follow-up corrects the "cancel" action on list edit actions based
on whether the edit was initiated from the list of lists or the list
contents view.
To test, view the list of lists and click the edit link next to one of
them. Click the cancel link. You should return to the list of lists you
were just viewing.
View the contents of a list. Choose "Edit list" from the edit menu.
Click the cancel link on the edit screen. You should return to the list
contents view from which you initiated the edit action.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 6a323ce4ce914e757d5c1c999237ad2c0efc15e9) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Mon, 12 Aug 2013 19:30:16 +0000 (15:30 -0400)]
Bug 10714: Redirect to list contents view upon save after initiating edit from list contents view (staff)
In the staff client, if you initiate a list edit from the list contents
view you should be redirected to that same view after saving your
changes. The OPAC already works this way.
To test, view the contents of an existing list. Click the "Edit list"
item under the "Edit" menu. Click save on the list edit form and you
should be redirected back to the contents view of that list.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit daa98e73f8baf178f2b0f32b4988d2414519ea4b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Galen Charlton [Mon, 19 May 2014 16:14:28 +0000 (16:14 +0000)]
Bug 12271: (follow-up) teach valid-templates.t how to include specified templates
Two of the template includes in the Bootstrap theme cannot be tested
all by themselves because they require that the template that includes
them define BLOCKs. This patch ensures that they are excluded
from individual testing; they will get exercised sufficiently by being
including by all of the other Bootstrap templates.
Fridolin Somers [Fri, 16 May 2014 09:25:19 +0000 (11:25 +0200)]
Bug 12271: add Bootstrap templates to valid-templates.t tests
valid-templates.t actually tests the templates and includes of only
the "prog" theme at opac and intranet. It does not test the opac
templates and includes of bootstrap theme, nor ccsr. This is critical
since this test is used for patch integrations in release maintenance.
This patch adds the test of bootstrap opac theme.
I did not manage to add the ccsr theme since it is not a real theme,
meaning it has no templates and not all includes.
Test by runnning perl xt/author/valid-templates.t and looking at the
logs.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Now there are 902 lines, bootstrap tested (1 error detected!)
No koha-qa errors
Marcel de Rooy [Mon, 10 Feb 2014 12:28:16 +0000 (13:28 +0100)]
Bug 11732: Eliminate warning on undefined branchcode
When you run the Reserves test, you have the warnings:
Use of uninitialized value $branchcode in hash element at /usr/share/koha/testclone/C4/Letters.pm line 138.
Use of uninitialized value $branchcode in hash element at /usr/share/koha/testclone/C4/Letters.pm line 148.
This patch removes that warning.
Test plan:
Run the Reserves.t again.
Revised Test Plan
-----------------
Run the following on the command line prompt before and after
applying the patch:
perl -e "use C4::Letters; *C4::Context::userenv= sub { return {} }; my \$blah=C4::Letters::getletter('circulation','DUE', 'BRA');"
Before the patch there will be errors (as above), after there will not.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
IndependentBranches must be on.
Mathieu Saby [Tue, 5 Nov 2013 11:33:04 +0000 (12:33 +0100)]
Bug 11202: Improve UNIMARC biblio indexing
This patch makes the following changes to UNIMARC biblio indexing :
A. Changes to UNIMARC conf files
1. add comments to biblio-koha-indexdefs.xml
2. make biblio-koha-indexdefs.xml more compact by grouping some
declarations
Ex : 200$f and 200$g => one declaration for 200$fg
3. suppress unneeded declarations (indexing of some 4XX fields and 6XX
fields not in unimarc format)
4. unindex some (sub)fields unneeded by most users (318, 207,230,210a,
215, 4XXd)
5. change the way 308 field is indexed (no visible changes)
6. replace Title-host with Host-item -- see bug 11119
7. index 208 in Material-Type -- see bug 11119
8. index 100 pos 8-9 and 9-12 in pubdate:y and pubdate:n
9. index 100 pos 8-9 in pubdate:s instead of 210$d
10. Index all subfields of note 334 and 327 in note index
11. Index 304 and 327 in title index as well as note index
327 can contain a list of titles included in a work
304 can contain the title of the original work in case of a
translation
12. Index 314 in author index as well as note index
314 can contain authors not mentionned in 200$f/g (the 4th, 5th etc.
author)
13. Index 328 note in Dissertation-information as well as note
14. Index 328$t in Title
B. Changes to ccl.properties :
1. add a new index Dissertation-information (1056)
2. fix EAN, pubdate and acqdate (they were not linked with bib1 attributes)
C. Changes to Search.pm
1. add Dissertation-information and suppress Title-host and UPC
D. Changes to QP config file queryparser.yaml
1. add Dissertation-information
2 fix EAN, pubdate and acqdate
Test plan :
If you cannot test in GRS1, test only in DOM, as GRS will be deprecated.
1. Apply the patch in a UNIMARC Koha running with DOM and ICU
2. copy src/etc/searchengine/queryparser.yaml into the main config
directory of QP
3. copy src/etc/zebradb/ccl.properties into the main config directory
of Zebra
4. copy src/etc/zebradb/marc_defs/unimarc/biblio/* into the main config
directory of Zebra
5. reindex biblios (rebuild_zebra.pl -r -b -x -v)
6. test note index : make some searches on 334$b or 327$b
7. test author index : make some searches on 314 field
8. test title index : make some searches on 304 and 327 field, make a
search on 328$t subfield
9. test dissertation-information index : make some searches on 328 field
10. In a record, put in the dates of 100 fields the values "1000" (1st
date) and "1001" (2d date) ; try to search a book written in year
1000, you should find the record ; idem for year 1001
11. make some searches and sort by date. It should work better as before,
especially if you have values like "c2009" or "impr. 2010" in 210
field
12. Regression test : make some searches on several indexes, like EAN,
etc. It should work as before
Test 10-12 with and without Queryparser activated.
Be careful: with Queryparser activated, the index names (title,
dissertation-information...) must be entered in lowercase only.
Of course, to test search and sort by dates, you need to have full
records, with dates in 100 field as well as 210 field.
Galen Charlton [Wed, 19 Feb 2014 20:35:08 +0000 (20:35 +0000)]
Bug 10544: (follow-up) update MARC21 DOM index definitions
This patch updates the MARC21 DOM index definitions to
index the 952$i as 'Number-local-acquisition' rather than
'stocknumber'.
To test (for a MARC21/DOM setup):
[1] Copy the MARC21 biblio-zebra-indexdefs.xsl over to the
active Zebra configuration directory.
[2] Reindex the bib records.
[3] Verify that 'stocknumber', 'inv', and 'number-local-acquisition'
searches work.
Bug 10544 - add Number-local-acquisition in QueryParser config
This patch adds the Number-local-acquisition into QueryParser
configuration file.
Like in ccl.properties, "Number-local-acquisition" is the main index
name and "stocknumber" and "inv" are aliases.
Test plan :
Enable QueryParser :
- Enable UseQueryParser syspref
- Edit your koha-conf.xml
- Add to "config" node : <queryparser_config>[your path]/etc/searchengine/queryparser.yaml</queryparser_config>,
adapt [your patch] to your install configuration folder
- If needed copy from sources "etc/searchengine/queryparser.yaml" into
your install configuration folder
Test search :
- Add Number-local-acquisition on an existing subfield in records.abs.
For example on item barcode field
- Reindex Zebra database
- Choose a value of this field that will match some results. For
example : "0*" will match all barcodes beginning with zero
- In intranet, enter this URL : <your server>/cgi-bin/koha/catalogue/search.pl?idx=stocknumber&q=0*&sort_by=relevance
=> You get some results
- In intranet, enter this URL : <your server>/cgi-bin/koha/catalogue/search.pl?idx=inv&q=0*&sort_by=relevance
=> You get the same results
- In intranet, enter this URL : <your server>/cgi-bin/koha/catalogue/search.pl?idx=number-local-acquisition&q=0*&sort_by=relevance
=> You get the same results
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Comments on case sensitivity of index names in QueryParser, see Bugzilla.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit f62e45dc92d0209e17c798a39f3425e9a2332586) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 10544: ensure that stocknumber searches work for MARC21
Bug 6256 replaced in bib1.att stocknumber by Number-local-acquisition
for number 1062.
In this case, Number-local-acquisition must be used in record.abs and
stocknumber can be an alias of it in ccl.properties.
Test plan (for MARC21/GRS1):
- drop zebra database (rebuild_zebra.pl -r ...)
- reindex
- test in simple search : ccl=Number-local-acquisition,alwaysmatches=''
=> you get all records with a stocknumber
- test in simple search : ccl=stocknumber,alwaysmatches=''
=> you get the same results
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 10e1cbeb1421a6351ac0df4d0c76a8ae79d4dd9d) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Galen Charlton [Wed, 19 Feb 2014 20:04:22 +0000 (20:04 +0000)]
Bug 11644: (follow-up) add FIXME
Arithmetic with monetary amounts is a *hard* problem -- or if
not hard, at least super-fiddly, particularly since in theory
a Koha database could have to deal with dozens of currencies
if used by a large research library. This patch adds a FIXME
implicitly commenting on the poor state of affairs of available
monetary calculation modules on CPAN.
Kyle M Hall [Thu, 30 Jan 2014 17:39:19 +0000 (12:39 -0500)]
Bug 11644: fix occasional failure to update fund amount due to floating-point math
When attempting to update a fund, if the amount unalloccated for the
fund is equal to the total, you can be prevented from saving. This is
due to imprecise floating point number comparison in
check_parent_total.pl
Test Plan:
1) Create a fund where the amount unallocated is equal to the amount
unallocated for the budget period
2) Edit the fund, attempt to change the name of the fund
3) Note you recieve an error and cannot save
4) Apply this patch
5) Repeat step 2
6) Note you can now update the fund
Signed-off-by: Sean McGarvey <smcgarvey@pascocountyfl.net> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ba689152e431217c8dd02d6ce0b8d14ae8d9f5da) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Amit Gupta [Tue, 18 Feb 2014 09:27:44 +0000 (14:57 +0530)]
Bug 11777: ensure "created by" is displayed by the order receiving page
This fixes a regression introduced by the patches for bug 10723.
To Test:
1) Create budget and fund under budget administration.
2) Create Vendor in acquisitons module.
3) Create basket under vendor.
4) Create order and choose budget while creating order.
5) Click on Receive shipment button.
6) Click on receive link on the right hand side you
will be able to see a staff user name in the "created by"
field.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ed6e2b57a1d47f413aa4f5f691e82b849daa8468) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Kyle M Hall [Tue, 18 Feb 2014 14:47:32 +0000 (09:47 -0500)]
Bug 11783: ensure CD field in SIP patron information response is populated
If a patron has a record-level hold that is unavailable, any patron
information request will send back an empty CD field when this field
should have an item barcode in it [RM note: this actually isn't
universally true -- the SIP2 standard is silent as to what is supposed
to go in the CD field. Some SIP2 devices do indeed want an item
barcode, but others are known to just want a display of the title
and author of the request in question. Providing an option is the
topic of a new enhancement request, however.]
This is due to a minor error in ILS::Patron::_get_outstanding_holds
where GetItemnumbersForBiblio is assumed to return an array but in
reality returns an arrayref.
Test Plan:
1) Create a record level hold for a patron and record
2) Using SIP2, make a patron information request
3) Note the empty CD fields
4) Apply this patch, restart SIP server
5) Repeat step 2
6) Note the CD field now has a barcode
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I did not test this patch but the following code shows me it is correct:
use C4::Items;
use Data::Dumper;
my $biblionumber = 5035;
my $itemnumber = (GetItemnumbersForBiblio($biblionumber))[0];
say Dumper $itemnumber;
$itemnumber = (GetItemnumbersForBiblio($biblionumber))->[0];
say Dumper $itemnumber;
Galen Charlton [Wed, 19 Feb 2014 16:40:06 +0000 (16:40 +0000)]
Bug 11779: (follow-up) improve GetLoggedInBranchcode() and add test cases
This patch adjusts the new GetLoggedInBranchcode() template function so
that it returns the empty string rather than undef if there is no
active user environment. That way, there won't be lots of undefined
value warnings if/when this function gets used in the OPAC.
This patch also adds test cases.
To test:
[1] Verify that there are no regressions in the main test
plan for this bug.
[2] Verify that prove -v t/db_dependent/Koha_template_plugin_Branches.t
passes.
Kyle M Hall [Tue, 18 Feb 2014 12:43:44 +0000 (07:43 -0500)]
Bug 11779: fix unexpected change in logged-in library when changing overdue notice triggers
Steps to reproduce:
1) Log into staff intranet
2) Set logged in branch
3) Browse to tools/overdue notice triggers
4) Select a branch from the pulldown that is not your logged in branch
5) use the "Check out" bar at the top of the page to search for a patron
to check out to
6) Once you have landed here, click the "check out" tab link again, or
the Edit button ( any action really )
7) Note your logged in branch has now changed to the once selected
when editing the notice/status triggers
This is due to the way the patron search passes the branchcode to be
used via the form. This form assumes the branchcode variable is
always the currently logged in branch, which may not and is not
always the case.
Test Plan:
1) Apply this patch
2) Repeat the steps to reproduce above
3) Note your logged in branch does not change
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Funny bug :) This patch fixes the described issue and should not
introduce regression.
Marc Véron [Tue, 18 Feb 2014 00:18:23 +0000 (01:18 +0100)]
Bug 11784 - fix displaying patron images in self checkout
I suppose this bug was introduced with Bug 10636 (patronimage should
have borrowernumber as PK, not cardnumber)
To test:
- Have a Patron with image. Configure everything to show image in SCO.
- Go to SCO and log in patron
- Image does not show up (broken link)
- Apply patch
- Test with prog, ccsr and bootstrap themes
- Image should display
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 9d5fadb9831f03ab80489f9f18467a1796fc9447) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Mon, 10 Feb 2014 20:29:06 +0000 (15:29 -0500)]
Bug 11740 - Use new DataTables include in quotes upload template
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to the
quotes upload page.
To test you need a CSV file of quotes to upload ( "source","text" ).
Go to Tools -> Quote editor and click the "Import quotes" button. Upload
the CSV file and confirm that the table which previews the import
results loads correctly. Sorting is not enabled, but pagination and
searching should work.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
No regression found.
Owen Leonard [Fri, 14 Feb 2014 19:29:47 +0000 (14:29 -0500)]
Bug 11767 - Use validation plugin when creating new authority framework tag
The page for adding a new tag to an authority framework includes some
custom form validation JavaScript which can be removed in favor of HTML5
validation attributes and Koha's built-in validation plugin. This patch
does so.
The patch also moves some tag markup out of the script and into the
template where it belongs.
To test, apply the patch and go to Administration -> Authority types ->
MARC structure -> New tag. Try submitting the form without entering a
tag number. This should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing tag should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 5ee8268a8df6ac193aa0500f4b801a3d359c1838) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Fri, 14 Feb 2014 18:11:04 +0000 (13:11 -0500)]
Bug 11766 - Use validation plugin when creating new authority type
The new authority type entry form uses custom form validation
JavaScript. This patch removes it in favor of using HTML5 validation
attributes and Koha's built-in validation plugin.
To test, go to Administration -> Authority types and click "New
authority type." Try submitting the form without entering any data. You
should see a warning about required fields. Upon entering text in those
fields the warning should disappear.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit ac9d872fefc867d4f068d425bcfcb929435809bd) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Fri, 14 Feb 2014 21:24:10 +0000 (16:24 -0500)]
Bug 11771 - Use validation plugin when creating new MARC framework tag
The page for adding a new tag to a MARC framework includes some
custom form validation JavaScript which can be removed in favor of HTML5
validation attributes and Koha's built-in validation plugin. This patch
does so.
The patch also moves some tag markup creation out of the script and into
the template where it belongs.
To test, apply the patch and go to Administration -> MARC bibliographic
framework -> MARC structure -> New tag. Try submitting the form without
entering a tag number. This should trigger a validation warning.
Submission of the form with valid data should work correctly. Editing an
existing tag should also work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Great improvement! Before this patch, I got a JS alert but the form was
submitted anyway.
Owen Leonard [Fri, 14 Feb 2014 13:48:46 +0000 (08:48 -0500)]
Bug 11756: improve default sorting on hold ratios report
The DataTables plugin doesn't by default take multiple columns into
account when sorting. The hold ratios report presents a situation where
it makes sense to sort by default based on two columns: hold count and
title, since there are likely to be many titles with the same hold
count.
This patch adds sorting by default on holds (descending) and title
(ascending). It also modifies the configuration of the title sort to
exclude articles when sorting.
To test, view the hold ratios report. If necessary use the filter form
to reduce the minimum hold ratio and generate more results. Confirm that
the correct columns can be sorted.
Note that by default one can manually trigger sorting on two columns by
shift-clicking the second column header.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 7514dc897cc49683915112229667ec1f654873ae) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Colin Campbell [Sun, 8 Dec 2013 22:26:18 +0000 (22:26 +0000)]
Bug 10789: Remove unnecessary calls to $sth->finish in C4::Acquisitions
C4::Acquisitions contained a number of unnecessary calls to
$sth->finish. Removed these and the associated variables introduced to
cache query results between fetch and the return
Where finish was the end of the routine I have added an
explicit return to document that no data is returned.
A number of places made query calls and fetched a single
row. Such a case could require an explicit finish.
These assume that they are looking up with a unique key.
To remove assumptions and isolate the code from future changes
I've switched these to fetching all and returning the
first row. I have commented these cases.
For fuller explanation see perldoc DBI
What I tested:
Edit existing basket, chnged name
Modify order line, change vendor price
Create new basket and add order
Delet this order
Delte this basket
New Basket, new order, user added, user removed
Add contract to vendor, change details, delete contract
Search order biblio
Create basket group, add basket to group, remove basket from group
Delete basket group
Receive order
Everything behaved as I expected
Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 2fac9a76450835337b015956a6f3150586aa5a17) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The Bootstrap and CCSR theme directories contain older copies of the
DataTables plugin which is no longer in use. This patch removes them
both.
To test, apply the patch and confirm that DataTables still work on the
following pages in both the Bootstrap and CCSR OPAC themes:
- The Cart. Add items to the Cart, open it and confirm that the table is
sorted correctly.
- The detail page: View the detail page for a title (opac-detail.pl)
with multiple items and confirm that the table of items is sorted
correctly.
- A subscription's "full history" page: Navigate to the detail page of a
subscription in your catalog which has received multiple issues. From
the subscriptions tab click the "More details" link, then the "Full
history" link. Confirm that the table of issues is sorted correctly.
- Search history: Enable the EnableOpacSearchHistory system
preference. Perform a few searches so that your current session
will record them. View the search history page and confirm that the
tables of current and past searches are sorted correctly.
- Suggestions (enable 'suggestion' system pref if necessary)
- Tags (enable TagsEnabled if necessary)
- Most popular (enable OpacTopissue if necessary)
- User summary (opac-user.pl): Checkouts, overdues, and holds tables
should all sort correctly.
- Self checkout: Enable WebBasedSelfCheck if necessary. Check out as a
patron who has multiple existing checkouts. Confirm that the table is
sorted correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Existing uses of datatables.min.js don't point to the theme directory.
Marc Véron [Sat, 15 Feb 2014 16:07:55 +0000 (17:07 +0100)]
Bug 11773: fix crash in sco-main.pl if no active currency is set
If no currency is defined as active and a patron with debts tries to
check out in welf checkout moduel, sco-main.pl crashes with:
Software error:
Can't use an undefined value as a HASH reference at /usr/share/kohaclone/opac/sco/sco-main.pl line 190.
This patch tests for active currency and simply does not display a
currency symbol if appropriate.
Test plan:
1) Make sure you have a patron with debts and no currency defined as
active. (Home › Administration › Currencies & Exchange rates
› Currencies )
2) Go to Self checkout module and try to checkout an item to this patron
Result: Crash with error message "Can't use an undefined value as a
HASH..."
3) Apply patch
4) Reload and try to checkout again
Expected result: Message "You owe the library..." without currency
symbol
5) Define a currency as active and try to checkout again
Expected result: Message "You owe..." with currency symbol
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 1db56c834b297eb7fd968691f66ef3517771cba5) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Fri, 14 Feb 2014 17:52:34 +0000 (12:52 -0500)]
Bug 11765 - Remove unused function isDate from templates
Several administration templates declare but do not use the JavaScript
function isDate(). This patch removes the declarations.
To test, apply the patch and search for instances of "isDate" in Koha
templates, includes, and JavaScript files. There should be no results.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I'm not sure this function has ever been used.
This patch removes the toUC in tools/letter.tt too.
Owen Leonard [Fri, 14 Feb 2014 17:22:19 +0000 (12:22 -0500)]
Bug 11764 - Move repeatedly redefined function toUC() into staff-global.js
toUC() is repeatedly declared on many administration templates. This
function, used to transform user input to uppercase, can be added to
staff-global.js to prevent repetition.
To test, confirm that transformation to uppercase is working on the
following Administration pages when text is entered in a form field and
focus is moved to the next field:
- Authority types -> New: Test the "Authority type" field.
- MARC bibliographic framework -> New framework: Test the "Framework
code" field.
- Patron types and categories -> New category: Test the "Category code"
field.
- Currencies and exchange rates -> New currency: Test the "Currency"
field.
- Item types -> New item type: Test the "Item type" field.
- Z39.50 client targets -> New Z39.50 server: Test the "Z39.50 server"
field.
The following pages do not call the toUC function despite the fact that
they included it:
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
tools/letter.tt declares this js function and don't use it.
Sophie Meynieux [Tue, 28 Jan 2014 16:16:18 +0000 (17:16 +0100)]
Bug 11628: add missing staffaccess permission to French userflags.sql file
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This permission exists in other installer files (for all other languages).
This patch removes a jQuery plugin which was added for use with the old
tablesorter plugin. Since the tablesorter plugin has been removed and
replaced with DataTables this plugin can also be removed.
To test, apply the patch and search for instances of the plugin:
grep -r -l "jquery.uitablefilter.js" *
There should be no results.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 42b71b87cc21ff69072116c7e42b02ad1f85932b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Galen Charlton [Fri, 14 Feb 2014 00:24:56 +0000 (00:24 +0000)]
Bug 11757: remove dependency on POE
The last use of the POE family of Perl modules went away with
the removal of zebraqueue_daemon.pl per bug 9001. Consequently,
this patch removes POE as a dependency.
To test:
[1] Verify that "git grep POE" and "git grep libpoe" report
nothing.
[2] Verify that koha_perl_deps.pl -a does not report POE
as a dependency.
[3] (extra credit) verify that Debian packages can be built
that do not list libpoe-perl as a dependency.
This patch also updates some distro-specific installation
instructions and scripts, but makes no representations about
whether those instructions currently work.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit b67dac81cceaab356486001292cff40977682fff) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Mon, 10 Feb 2014 17:59:07 +0000 (12:59 -0500)]
Bug 11735 - Use new DataTables include in calendar template
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to the
calendar template and corrects some table sorting configuration errors.
To test you should have multiple calendar entries in various categories
of holiday: Unique holidays, repeating yearly holidays, repeating weekly
holidays, and exceptions. Sorting of date columns should work regardless
of your dateformat system preference.
Signed-off-by: merlissia <manuelimel@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Note: Day of week is not correctly sorted: Sundays, Mondays, Thursdays.
But it is not a regression. It is caused by the ugly way to display
weekdays (document.write).
Owen Leonard [Mon, 10 Feb 2014 20:07:52 +0000 (15:07 -0500)]
Bug 11739 - Use new DataTables include in notices template
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to the
Notices & Slips page.
To test, view the Notices & Slips page (tools/letter.pl). Confirm that
the table of notices is sorted correctly.
Signed-off-by: merlissia <manuelimel@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 26696e3b299ff9ca96d7a834a172f6534ef952d5) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Mon, 10 Feb 2014 19:30:26 +0000 (14:30 -0500)]
Bug 11737 - Use new DataTables include in quotes management template
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to the
quotes management page.
To test you should have a multiple quotes in your database. Apply the
patch and view the quotes manager page (tools/quotes.pl). Confirm that
table sorting works correctly.
Signed-off-by: merlissia <manuelimel@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 326ccb57ce8c537630b117bc92bd49ca4947c52b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Janusz Kaczmarek [Fri, 31 Jan 2014 15:12:10 +0000 (16:12 +0100)]
Bug 11652: ensure that merging authority records corrects biblios
When merging authority records in librarian interface biblio records
linked to deleted authority are not being corrected (i.e. have still
old heading and orpaned link in $9).
Test plan:
1. Have two authorities in the catalogue, linked to biblio records.
2. Merge them with the new merge facility (cf. Bug 5202).
3. Have a look a the biblio record(s) previously linked to the removed
authority. It should still have the old heading AND orpaned authority
link in $9.
4. Apply the patch.
5. Refresh the test records (or use another set).
6. Repeat 1-3. Headings should be refreshed and the correct authid link
should be in $9 now.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Note: new record count on the authority record will show
after reindexing. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 0070a7f6afb30b6f7ae8bc0eb073a4c39e0f783a) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 11704: Make */svc/report print the correct headers
To test:
1 - Go through the first comments instructions to reproduce
and verify the bug is present (OPAC and STAFF)
2 - Apply the patch
3 - Repeat step 1 and notice
* characters are not broken anymore
* the header is correct
4 - Sign off
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit aace5d436dbab1f13e2e1c06d0b4ed5f1ec13ced) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Mon, 3 Feb 2014 17:03:14 +0000 (12:03 -0500)]
Bug 11670 - Remove sorting from patron lists action columns
The list of patron lists has sortable columns for the add, edit, and
delete buttons. These columns should not be sortable. This patch removes
sorting.
This patch also adds the "btn-mini" class to the in-table buttons to
make the table more compact.
To test you must have existing patron lists. Apply the patch and
navigate to Tools -> Patron lists. The columns containing the add, edit,
and delete buttons should not be sortable. Other columns should sort
correctly.
Created to patron lists and confirmed the collums 'add patrons', 'edit'
and 'delete' are no longer sortable. Column 'Name' and 'Patrons in list'
are still sortable. The size of buttons are smaller.
I also agree this is an improvement.
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 9ac83cdaafb267e1a76aa957b86b7e7b8955d819) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Fri, 7 Feb 2014 21:02:06 +0000 (16:02 -0500)]
Bug 11721 - Use new DataTables include in suggestions template
This patch modifies the template for the suggestions page to use
the new DataTables include. This simplifies the inclusion of assets and
updates to the latest DataTables version.
Sorting is now configured to exclude articles when sorting the title
column.
To test, apply the patch and view the suggestions page (Acquisitions ->
Suggestions). Sorting of suggestions should work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Note: the columsn fund and status are not sortable/searchable
before and after applying the patch.
Pasi Kallinen [Thu, 24 Apr 2014 08:01:52 +0000 (11:01 +0300)]
Bug 11631: Make i18n toolchain ignore useless strings
This patch removes several types of strings from the
PO files that cannot be usefully translated, including
ones that consist entirely of punctuation and/or HTML entities.
Test:
1) Update PO files of some lang, xx-YY-*po
cd misc/translator
perl translate update xx-YY
2) Do it again, just in case
3) rm po/xx-YY*po~
4) Extract all msgid's, sorted
cat po/xx-YY*po | egrep "^msgid" | sort | uniq > xx-YY-pre
5) Apply the patch
6) Repeat 1-3
7) Repeat 4 again, other file
cat po/xx-YY*po | egrep "^msgid" | sort | uniq > xx-YY-post
8) Do a diff, inspect results, only strings with %s and \s
diff xx-YY-pre xx-YY-post | less
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described, 380 strings less to 'translate'
No koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan, works as described.
Jonathan Druart [Mon, 27 Jan 2014 11:22:21 +0000 (12:22 +0100)]
Bug 11616: remove jQuery tablesorter plugin
DataTables has replaced the tablesorter plugin for client-side sorting
of tables in Koha. There is no table using this plugin, so this patch
removes it and remaining references to it.
REVISED TEST PLAN
-----------------
1) Apply the patch
2) Home -> Koha administration -> Authorized values
3) Change the 'Show category:' drop down value, and play with
the sorting of columns.
-- should sort as expected.
4) Search the catalogue -> look for a biblio with high circulation
5) Click one of the name links.
6) Click the Items tab on the left.
7) Scroll down and click the (View item's checkout history)
link in the History area.
-- There was no sorting prior to the patch, so afterwards
it should display the same.
8) git grep -i tablesorter
-- Only a reference in staff-global.css and release texts.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 166720982e59a929aac9191d89af57a57545ff15) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
JaTara Barnes [Sun, 5 Jan 2014 06:33:31 +0000 (00:33 -0600)]
Bug 11415: Add syspref to toggle SCO receipt printing
This patch adds the SelfCheckReceiptPrompt to control
whether receipts are automatically printed when a patron
finishes a SCO session. This is on by default during
new installations and upgrades.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(cherry picked from commit 9cc3b69a0cf1adfc7c50c25ef6d57c2e027e8950)
projects / koha.git / log