Aleisha [Tue, 29 Mar 2016 23:44:56 +0000 (23:44 +0000)]
Bug 16162: Making dictionary 'Delete' a button
EDIT: This patch should have gotten rid of those tabs
EDIT2: Will now apply with patch on Bug 16161
To test:
1) Apply Bug 16161 first
2) Go to Reports -> View dictionary
3) Confirm that the 'Delete definition' button now just says 'Delete' and is styled as a font awesome button.
4) Confirm that the button does not wrap on narrower browsers.
5) Confirm that column heading is now 'Action'.
6) Confirm that button deletes as expected. (If you're wondering about the missing confirm message upon delete, see Bug 16161.)
Sponsored-by: Catalyst IT
Tested on top of Bug 16161 Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 29 Mar 2016 23:37:19 +0000 (23:37 +0000)]
Bug 16161: Confirm message when deleting definition
To test:
1) Go to Reports -> View dictionary
2) Attempt to delete definiton. Confirm that a confirm messages comes up and works as expected.
Sponsored-by: Catalyst IT
NOTE: confirmation message didn't exist before patch.
confirmation message appeared after patch.
both options worked as expected.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Wed, 30 Mar 2016 00:02:09 +0000 (00:02 +0000)]
Bug 16164: Making check expiration actions buttons
EDIT: Using same font awesome icon for 'Renew' as in other places
To test:
1) Go to Serials -> Check expiration
2) Put in a date where one or more subscriptions will expire prior to this date
3) Confirm that column heading is now 'Actions'
4) Confirm that Edit and Renew now show as font awesome buttons
5) Confirm that the buttons don't wrap on narrower browsers
6) Confirm the buttons still work as expected
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jacek Ablewicz [Wed, 30 Mar 2016 10:21:03 +0000 (12:21 +0200)]
Bug 16168: Eliminate unneeded C4::Context->dbh calls in C4/Biblio.pm
Right now, ->dbh calls are actually quite expensive (they involve
DB connection health checks, each and every time). Some speed-sensitive
subroutines inside C4/Biblio.pm (GetMarcStructure, GetAuthorisedValueDesc)
have this statement
my $dbh = C4::Context->dbh;
on top of the code, but they don't always/don't usually need DB
handle - not at that stage at least. This trivial patch eliminates
unneeded ->dbh calls in those subroutines. With it, average
GetMarcStructure() running time goes down from 14 miliseconds
to 9 miliseconds (on top of Bug 16166), it also makes catalogue
search profiling a bit easier.
Test plan:
1) apply patch
2) ensure that catalogue searches are still working
3) run t/*Biblio* tests
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Thu, 31 Mar 2016 21:42:06 +0000 (21:42 +0000)]
Bug 16183: Confirm message upon deleting patron messages
To test:
1) Go to a patron circulation page and add a message
2) Click '[Delete]'
3) Confirm that a confirm dialog shows up and 'Cancel' and 'OK' do what
is expected.
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Bug 16193: Typo in Automatic item modifications by age
To test:
1) Go to Tools -> Automatic item modifications by age
2) Click Edit
3) Add a rule if you have none, otherwise notice button 'Submit theses
rules' and typo (theses)
4) Apply patch, refresh page
5) Confirm button now says 'Submit these rules' (typo is fixed)
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Tue, 5 Apr 2016 06:52:50 +0000 (07:52 +0100)]
Bug 16199: Remove C4::Ris::charconv
This subroutine always returns what has been sent in parameter.
It is unecessary and can be removed.
Test plan:
prove t/Ris.t
should not be noisy
Export a catalogue record in Ris should generate the same file with and
without this patch
NOTE: With/Without were identical in my testing.
t/Ris.t is nicely silenced.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Tue, 5 Apr 2016 15:43:58 +0000 (11:43 -0400)]
Bug 16205 - MARC editor settings menu should use a Font Awesome icon
When I added the MARC editor settings menu in Bug 15859 I accidentally
used a Glyphicon. This patch corrects it to use a Font Awesome icon.
To test, apply the patch and open the basic cataloging editor. The
"Settings" menu should use a Font Awesome icon instead of a Glyphicon.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Icons changed Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Works as expected, no qa errors
Nick Clemens [Fri, 26 Feb 2016 21:08:55 +0000 (21:08 +0000)]
Bug 15928 - Show unlinked guarantor
To test:
1 - Add guarantor data to patron account by typing it in but do not 'Set to patron'
2 - Note it is not displayed on patron details
3 - Apply patch
4 - Note the info is displayed
5 - Test that linked guarantors show as expected
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended-patch: Correct some indents/spaces
Mason James [Fri, 1 Apr 2016 02:56:34 +0000 (15:56 +1300)]
Bug 16184 - Report bor_issues_top shows incorrect number of rows
TEST PLAN
---------
1) Have at least 6 patrons with checkouts and some checkins.
2) Reports -> Patrons with the most checkouts
3) Click 'Submit' (default is 5)
-- more than 5 entries listed.
4) Apply patch
5) Refresh page
-- only 5 entries listed.
6) Run koha qa test tools
NOTE: While this works, I'd be much happier with a refactor
as it would also speed up the report. See comment #5.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
If the branchcodesuggestedby is not defined, the find won't return
anything and ->branchname on an undefined value will raise
Can't call method "branchname" on an undefined value at
/home/katrin/kohaclone/opac/opac-suggestions.pl line 153.
Test plan:
-Staff
Create a patron
Use this patron to create a suggestion
Delete the patron
-OPAC
Logout and trigger opac/opac-suggestions.pl
Without this patch, you will get an error
With this patch applied, everything should be ok
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works ok following test plan
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Owen Leonard [Wed, 6 Apr 2016 14:31:09 +0000 (10:31 -0400)]
Bug 16215: Missing closing quote in checkout template
This patch adds a missing closing quote to the circulation template.
To see the affect of this bug:
- Log in to Koha with an account which does not have the
'force_checkout' permission.
- Locate a barcode which is checked out to a patron.
- Open a different patron account for checkout.
- Try to check out the barcode to that different patron.
You see a "Cannot check out" dialog which breaks the structure of the
rest of the page.
To test, apply the patch and repeat the steps above. The issue should be
fixed.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
John Seymour [Thu, 11 Feb 2016 03:38:15 +0000 (22:38 -0500)]
Bug 14633: Patch to control.ini to add or dependency to libapache2-mpm-itk
The other attachment was not a patch which could be applied by
'git bz'. This corrects that.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
debian/update-control will need to be run after this is applied, but
it works well Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
"""
IMPORTANT NOTE: This test plan does not take into account the notices
generated for the staff ("These messages were not sent directly to the
patrons."). However the behavior will also change, the print template
will be used in all cases. Is it what we want?
"""
Yes, it is what we want. But if the print template does not exist, the
notice is not generated, we'd like to get the email template instead.
Test plan:
- Remove the print template for the letter you use for overdues
- Define an overdue rule to send an email
- Remove the email address for the patron which has overdues
- Execute the overdue_notices script
The staff should get an email notice and a print notice (using the
email template) should be generated for the patron
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Thu, 3 Mar 2016 08:58:06 +0000 (08:58 +0000)]
Bug 15967: Fix regression from bug 14133 - notify the library if patron is not
Regression introduced by bug 14133, see but 14133 comment 13.
Test plan:
Without this patch applied, if a patron cannot be notified (no email
address or sms number), the print notice generated for the library was
not.
With this patch applied, the print notice should be generated using the
print template
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Kyle M Hall [Mon, 21 Dec 2015 13:05:45 +0000 (13:05 +0000)]
Bug 15630 - Make Edifact module pluggable
Koha's EDIFACT module works great for many European vendors,
but does not work will for US vendors, which have a much different
interpretation of 'standard'. In fact, each vendor may require
different arrangements of values in EDIFACT messages. It would be
impossible to encompass all these requirements within Koha's EDIFACT
module itself. Instead, we should allow the module to be pluggable, so
versions of the module can be developed for vendors that require EDIFACT
messages that don't conform to the standard set by Koha's EDIFACT
module.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Enable Koha plugins
4) Install the Edifact stub plugin available at
https://github.com/bywatersolutions/koha-plugin-edifact-stub
5) Edit the EDI Vendor account, assign the plugin to a Vendor EDI account
6) Test EDI functionality ( ORDER, INVOICE ), there should be no errors
or changes to the EDIFACT message input or output
Signed-off-by: Jason DeShaw <JDeShaw@cityoffargo.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Colin Campbell [Fri, 18 Mar 2016 11:31:41 +0000 (11:31 +0000)]
Bug 7736 amend edi_cron.pl to use new style call to Context
Bug 9006 changed the api for retrieving config values
from C4::Context after the removal of Autoload
This changes the syntax used to retrieve logdir to reflect
the correct syntax
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Zeno Tajoli [Tue, 27 Oct 2015 11:32:52 +0000 (12:32 +0100)]
Bug 7736 Add Edifact order fields to Acquisition.t
Modification in Acquisition.t to support in test the new fields
of the table aqorders:
line_item_id, suppliers_reference_number,
suppliers_reference_qualifier, suppliers_report
Original patch by Zeno Tajoli
I amended to include the report field (ColinC)
Signed-off-by: Paul Johnson <p.johnson@staffs.ac.uk> Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Colin Campbell [Wed, 20 Jan 2016 11:31:31 +0000 (11:31 +0000)]
Bug 7736: Support Ordering via Edifact EDI messages
Add support for processing incoming Edifact Quotes, Invoices
and order responses and generating and transmission of
Edifact Orders.
Basic workflow is that an incoming quote generates an aquisition
basket in Koha, with each line corresponding to an order record
The user can then generate an edifact order from this (or another)
basket, which is transferred to the vendor's site
The supplier generates an invoice on despatch and this will
result in corresponding invoices being generated in Koha
The orderlines on the invoice are receipted automatically.
We also support order response messages. This may include
simple order acknowledgements, supplier reports/amendments
on availability. Cancellation messages cause the koha order
to be cancelled, other messages are recorded against the order
Which messages are to be supported/processed is specifiable on a
vendor by vendor basis via the admin screens
You can also specify auto order i.e. to generate orders from quotes
without user intervention - This reflects existing
workflows where most work is done on the suppliers website
then generating a dummy quote
Received messages are stored in the edifact_messages table
and the original can be viewed via the online
Database changes are in installer/data/mysql/atomicchanges/edifact.sql
Note new perl dependencies:
Net::SFTP:Foreign
Text::Unidecode
Signed-off-by: Paul Johnson <p.johnson@staffs.ac.uk> Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Owen Leonard [Wed, 9 Mar 2016 16:48:39 +0000 (11:48 -0500)]
Bug 10612 [Follow-up] Combine and clarify menu items
This follow-up patch for Bug 10612 moves all list operations into one
menu while (hopefully) clarifying the labels for each.
Also in this patch: Changed datatables sorting configuration to use the
"nosort" attribute.
To test, apply the patch and go to Tools -> Patron lists.
- On a patron list with no patrons, confirm that the "Actions"
menu lists "Add patrons," "Edit list," and "Delete list."
- On a patron list containing one or more patrons, confirm that the
"Actions" menu /also/ has these options: "Print patron cards," "Batch
edit patrons," and "Batch delete patrons."
- Confirm that the "actions" column is not sortable.
- Test logging in as a user who has various combinations of permission
to batch edit and batch delete.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Kyle M Hall [Wed, 11 Jun 2014 12:11:48 +0000 (08:11 -0400)]
Bug 10612 - Add ability to delete patrons with batch patron deletion tool
This patch adds the ability to select a patron list for deletetion
when using the Batch patron deletion/anonymization tool. It also adds
buttons to the the patron lists table to access both the batch deletion
and batch modification directly from the lists view.
This is a squash of previous patches but now adds a patron_list_id
parameter to C4::Members::GetBorrowersToExpunge and uses that routine to
fetch patrons from a list.
Test Plan:
1) Apply this patch
2) Create a list of patrons with the new Patron Lists feature
3) Try using the batch edit link form the lists table
4) Try using the batch delete link from the lists table
5) Verify previous functionality has not changed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Patron batches are correctly passed to the edit and delete pages.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mark Tompsett [Mon, 8 Feb 2016 22:54:12 +0000 (17:54 -0500)]
Bug 10988: Tabs vs Spaces qa failure patch
Run Koha QA Test tools and discovered this failed because of tabs.
Rather than fail this and wait forever for it to get fixed, this
patches it, and I'll mark it as signed off anyways.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 10988 - Fix some wording Fix some outdated wording in googleopenidconnect
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test Plan (remains the same):
0) Back up your database
1) Apply all these patches
2) In your mysql client use your Koha database and execute:
> DELETE FROM systempreferences;
> SOURCE ~/kohaclone/installer/data/mysql/sysprefs.sql;
-- Should be no errors.
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see 4 entries.
> QUIT;
3) Restore your database
4) Run ./installer/data/mysql/updatedatabase.pl;
5) In your mysql client use your Koha database and execute:
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see the same 4 entries.
6) Log into the staff client
7) Home -> Koha administration -> Global system preferences
8) -> OPAC
-- make sure your OPACBaseURL is set (e.g. https://opac.koha.ca)
9) -> Administration
-- There should be a 'Google OAuth2' section with the ability
to set those 4 system preferences.
10) In a new tab, go to https://console.developers.google.com/project
11) Click 'Create Project'
12) Type in a project name that won't freak users out, like your
library name (e.g. South Pole Library).
13) Click the 'Create' button.
14) Click the 'APIs & auth' in the left frame.
15) Click 'Credentials'
16) Click 'Create new Client ID'
17) Select 'Web application' and click 'Configure consent screen'.
18) Select the Email Address.
19) Put it a meaningful string into the Product Name
(e.g. South Pole Library Authentication)
20) Fill in the other fields as desired (or not)
21) Click 'Save'
22) Change the 'AUTHORIZED JAVASCRIPT ORIGINS' to your OPACBaseURL.
(http://library.yourDNS.org)
23) Change the 'AUTHORIZED REDIRECT URIS' to point to the new
googleoauth2 script
(http://library.yourDNS.org/cgi-bin/koha/svc/auth/googleopenidconnect)
24) Click 'Create Client ID'
25) Copy and paste the 'CLIENT ID' into the GoogleOAuth2ClientID
system preference.
26) Copy and paste the 'CLIENT SECRET' into the GoogleOAuth2ClientSecret
system preference.
27) Change the GoogleOpenIDConnect preference to 'Use'.
28) Click 'Save all Administration preferences'
29) In the OPAC, click 'Log in to your account'.
-- You should get a confirmation request, if you are
already logged in, OR a login screen if you are not.
-- You need to have the primary email address set to one
authenticated by Google in order to log in.
30) Run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Joonas Kylmälä [Mon, 31 Aug 2015 09:41:34 +0000 (09:41 +0000)]
Bug 11807: (follow-up) remove date conversions
To test
1/ Apply both patches
2/ This patch lets you easily configure mappings for categorycode values.
These mapping will be used when updating the user's account after a successful LDAP login.
3/ With this configuration, LDAP users with the usertype value "EMP" on the LDAP server should have the "EMPLOYEE" categorycode in Koha.
Signed-off-by: Chris <chris@bigballofwax.co.nz> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Frédérick [Wed, 19 Feb 2014 17:02:41 +0000 (12:02 -0500)]
Bug 11807 : Add support for categorycode conversions when updating an user using a LDAP server.
To test
1/ Apply both patches
2/ This patch lets you easily configure mappings for categorycode values.
These mapping will be used when updating the user's account after a successful LDAP login.
3/ With this configuration, LDAP users with the usertype value "EMP" on the LDAP server should have the "EMPLOYEE" categorycode in Koha.
Signed-off-by: Chris <chris@bigballofwax.co.nz> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Tue, 15 Mar 2016 09:38:20 +0000 (09:38 +0000)]
Bug 16068: Do not cache overridden prefs
These prefs do not need to be cached, a quick access to $ENV permit to
get the value.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 16173: db_structure.t shouldn't have a fixed number of tests
This patch makes db_structure.t more flexible regarding how many tests are run.
This is important because it would fail on each db structure change, masking potential
real problems.
To test:
- Run
$ prove t/db_dependent/db_structure.t
=> FAIL: the number of tests ran doesn't match what is expected
- Apply the patch
- Run
$ prove t/db_dependent/db_structure.t
=> SUCCESS: Tests count is not an issue [1]
- Sign off
[1] Right now the tests run successfuly, they might fail if a real bug is introduced
on the DB structure, in the meantime.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mark Tompsett [Fri, 1 Apr 2016 13:31:41 +0000 (09:31 -0400)]
Bug 16185: t/db_dependent/Reports_Guided.t is failing
TEST PLAN
---------
1) prove t/db_dependent/Reports_Guided.t
-- fails
-- note the failure has a scalar function-like bracketing
2) apply patch
3) prove t/db_dependent/Reports_Guided.t
-- passes
4) git diff origin/master
-- note all scalars have been changed to not have
function-like brackets which could be incorrectly
parsed.
5) run koha qa test tools
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
David Cook [Fri, 5 Feb 2016 05:09:45 +0000 (16:09 +1100)]
Bug 15745: C4::Matcher gets CCL parsing error if term contains ? (question mark)
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Also fixes ! and +
Rebased to master Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
It makes perfect sense and works as expected. This part of the code is too
under-tested so no point requiring a regression test for such a simple change.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 16174: icondirectories.t broken due to bug 15527
This patch fixes it.
To test:
- Run
$ prove xt/author/icondirectories.t
=> FAIL: Tests fail:
Failed test 'opac_icon_directory: koha-tmpl/opac-tmpl/xslt/itemtypeimg exists'
- Apply the patch
- Run
$ prove xt/author/icondirectories.t
=> SUCCESS: Tests pass and don't raise warnings.
- Sign off
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 15527 introduced a new directory (xslt) on the top level OPAC templates
directory. The tt_valid.t script should include that top level dir on the list
of excluded dirs so it doesn't look for themes there.
To test:
- Run
$ prove xt/tt_valid.t
=> FAIL: You get the following warning:
Can't stat koha-tmpl/opac-tmpl/xslt/en: No such file or directory
at xt/tt_valid.t line 8
- Apply the patch
- Run
$ prove xt/tt_valid.t
=> SUCCESS: Tests pass and don't raise warnings.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Thu, 31 Mar 2016 07:27:02 +0000 (08:27 +0100)]
Bug 16176: Fix a test about OpenLibrarySearch
Introduced by bug 6624: When C4::UsageStats::BuildReport is modified,
the tests should be too.
Test plan:
prove t/db_dependent/UsageStats.t
should return green
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Note that if we maintain this list of sysprefs at two places, we will
probably have this test failing regularly..
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This is because the cannot_be_modified key is not always created by
C4::Utils::DataTables::ColumnsSettings subroutines
Test plan:
prove t/db_dependent/ColumnsSettings.t
should return green
And you can also test a table where the feature is set and a column
cannot be modified from the admin page.
NOTE: Works as described. I was pondering this potential
solution when I found it in bugzilla.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test plan:
prove xt/single_quotes.t
should return green
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch makes the PayPal integration feature independent from the
URL::Encode library, which is absent in some supported distributions.
It uses the URI package which is already a Koha dependency.
To test:
- Apply the patch
- Notice there are no deps for URL::Encode
- Follow the steps from the original patch
=> SUCCESS: It works as expected
- Sign-off :-D
Note: I deleted the line in which $amount_to_pay was url-encoded, because that's
one of the things query_form does (and the variable is only used as a parameter to it).
Sponsored-by: ByWater Solutions Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
On log rotation Starman/Plack keeps failing (Auth.pm related problems) due to
permission issues:
Could not compile /usr/share/koha/opac/cgi-bin/opac/opac-search.pl: Can't locate Authen/CAS/Client/Response/Failure.pm
: ./Authen/CAS/Client/Response/Failure.pm: Permission denied at /usr/share/perl/5.20/base.pm line 97.
...propagated at /usr/share/perl/5.20/base.pm line 106.
BEGIN failed--compilation aborted at /usr/share/perl5/Authen/CAS/Client/Response.pm line 68.
Compilation failed in require at /usr/share/perl5/Authen/CAS/Client.pm line 8.
BEGIN failed--compilation aborted at /usr/share/perl5/Authen/CAS/Client.pm line 8.
Compilation failed in require at /usr/share/koha/lib/C4/Auth_with_cas.pm line 25.
BEGIN failed--compilation aborted at /usr/share/koha/lib/C4/Auth_with_cas.pm line 25.
Compilation failed in require at /usr/share/koha/lib/C4/Auth.pm line 63.
BEGIN failed--compilation aborted at /usr/share/koha/lib/C4/Auth.pm line 90.
Compilation failed in require at /usr/share/koha/opac/cgi-bin/opac/opac-search.pl line 34.
BEGIN failed--compilation aborted at /usr/share/koha/opac/cgi-bin/opac/opac-search.pl line 34.
As we do with zebra daemons, starman should be restarted as it doesn't handle log file rotation
gracefully[1].
I'm not sure how to reproduce it on a dev environment.
[1] https://github.com/miyagawa/Starman/issues/55
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mark Tompsett [Fri, 1 Apr 2016 14:19:45 +0000 (10:19 -0400)]
Bug 16186: t/db_dependent/Circulation_Issuingrule.t is failing
TEST PLAN
---------
1) prove t/db_dependent/Circulation_Issuingrule.t
-- fails
2) apply patch
3) prove t/db_dependent/Circulation_Issuingrule.t
-- pass
4) git diff origin/master -- t/db_dependent/Circulation_Issuingrule.t
-- notice that bug 5876 and bug 9129 combined to cause this
5) run koha qa test tools
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Alex Arnaud [Wed, 24 Feb 2016 09:13:40 +0000 (10:13 +0100)]
Bug 15889: LDAP authentication: Only update mapped attributes
Test plan:
- Update your configuration file to use LDAP authentication and enable update
(<update>1</update>) option,
- login with an existing user with extended attrbitutes that are not in
LDAP mapping,
- check that all attributes are still here.
Signed-off-by: Chris <chrisc@catalyst.net.nz> Signed-off-by: Philippe Blouin <philippe.blouin@inlibro.com> Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Katrin Fischer [Wed, 30 Mar 2016 06:12:56 +0000 (08:12 +0200)]
Bug 14257: Follow-up - Add documentation, fix typo, fix test
- t/db_dependent/ILSDI_Services.t was failing for me as I had
issues in my database, fixed with another delete line
- QA tools found a typo - comparision
- Added documentation of the new parameter to the ilsdi.pl page
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
A new element <attributes> will be added if there
are any attributes available from the database.
We need to discuss the security implications of showing the
attributes. At present it will allow querying of non-public
(OPAC-visible) information. We might want to change this.
Sponsored-By: Halland County Library
Test plan:
* Configure Koha to make use of extended attributes:
Under 'Administration' -> 'Global system preferences' ->
'Patrons' tab -> Set 'ExtendedPatronAttributes' to 'Enable',
press save and switch to 'Web services' tab.
* Enable the ILS-DI service:
Under 'Administration' -> 'Global system preferences' ->
'Web services' tab -> 'ILS-DI' section:
Set 'ILS-DI' to 'Enable' and save.
* Create an attribute to query:
Under 'Administration' -> 'Patrons and circulation' ->
'Patron attribute types' press 'New patron attribute type':
Enter a type code, like 'DOORCODE', description and assign
a category that your test patron is a member of, then save.
* Set value for test user:
Locate the test patron, the new attribute should be listed
under 'Additional attributes and identifiers'.
Click 'Edit' and assign a value, like '1337' and save.
* Query the ILS-DI service:
http://127.0.1.1/cgi-bin/koha/ilsdi.pl?service=GetPatronInfo&patron_id=1&show_attributes=1
The output XML should have an element named 'attributes'
containing the data you entered.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Kyle M Hall [Thu, 9 Jul 2015 13:53:31 +0000 (09:53 -0400)]
Bug 14512 - Add support for AV field to Koha's SIP2 Server
Koha's SIP2 server should have support for the AV field ( field items ).
The biggest problem with this field is that its' contents are not really
defined in SIP2 protocol specification. All it says is "this field
should be sent for each fine item". Due to this, I think the contents of
the field need to be configurable at the login level, so that the
contents can be defined based on the SIP2 devices requirements for the
AV field.
Test Plan:
1) Apply this patch
2) Find a patron with outstanding fines
3) Run a patron information request using misc/sip_cli_emulator.pl using the new -s option with the value " Y "
4) Note there is an AV field for each fee containing the description and amount
5) Edit your sip config, add an av_field_template parameter to the login you are using such as
av_field_template="TEST [% accountline.description %] [% accountline.amountoutstanding | format('%.2f') %]"
6) Restart your SIP server
7) Repeat the patron information request
8) Note your custom AV field is being used!
Signed-off-by: Chris Davis <cgdavis@uintah.utah.gov> Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Mon, 29 Feb 2016 00:42:28 +0000 (00:42 +0000)]
Bug 15931: Removing link to records if authority is not used by any records
EDIT:
Fixing typo: records(s) -> record(s)
On details page, if authority is not used in any records, the page will display a more used friendly message: "This authority is not used in any records."
To test:
1) Do an authority search on authorities-home.pl. Notice that authorities not used in any records have a clickable link (under 'Used in:' column) which redirects to a catalog search with no results
2) Go back to your authority search results on authorities-home.pl and click 'Details'. Notice that under the auth name, there is a 'Used in X records' link that again returns a catalog search with no results.
3) Apply patch
4) Repeat steps 1, 2. Authorities not used in any records should no longer have clickable links and links to authorities which are used in records should work as expected.
5) Confirm it now says record(s) instead of records(s)
6) Confirm that on detail page for an authority which is not used by any records, it now says more friendly message.
Sponsored-by: Catalyst IT Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Tue, 29 Mar 2016 02:29:26 +0000 (02:29 +0000)]
Bug 16058: Delete individual news item from koha-news.pl
This patch adds a confirm message for deleting a news item from the home page in the staff client. It also gives the ability to delete an individual news item from koha-news.pl with a confirm message. The buttons on koha-news.pl are now styled as font awesome buttons.
To test:
1) Go to main intranet page. Click 'Delete' for a news item.
2) Confirm that Cancel stops the Delete, and OK deletes the item and takes you to tools/koha-news.pl
3) Confirm that the buttons (Edit and Delete) on koha-news.pl are now styled as font awesome buttons and the buttons don't wrap on a narrow browser.
4) Confirm that the column heading for the buttons is now "Actions".
5) Confirm that clicking Delete triggers a confirm message. Confirm that Cancel stops the Delete, and OK deletes the item and it no longer shows in the News table or anywhere else.
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended-patch: just split the td on several lines for readability.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Tue, 15 Mar 2016 10:05:06 +0000 (10:05 +0000)]
Bug 16070: Default value for sysprefs should be an empty string
The default value for sysprefs should not be NULL but an empty string.
When a pref is cleared, it's set to an empty string, so it does not make
sense to create it with an undefined value.
The main purpose of this patch is to remove the warning in logs when a
pref is accessed for the first time and the cache is not yet populated.
It also ensures that the behavior will be the same for the first access
and the others.
Test plan:
SELECT COUNT(*) FROM systempreferences WHERE value IS NULL;
Should not return any results after the update DB entry executed.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Hector Castro [Thu, 17 Mar 2016 16:42:10 +0000 (10:42 -0600)]
Bug 16092: Fix error dialog and introduce the Font Awesome icons when delete a branch category
Also change admin/branch.pl type => 'error' to type => 'alert' to fit
with wiki <https://wiki.koha-community.org/wiki/Interface_patterns#Errors_and_messages>
To test:
1) Go to Admin -> Libraries and groups
2) Try to delete a library with patrons and bib items
3) See the error message in yellow
4) Try to delete a branch category/group without any library attached
to it
5) Apply patch and repeat steps 1 to 4. Notice about the changes
6) Test buttons Yes, delete and No, do not delete and verify that they
work as expected
Signed-off-by: Marc Véron <veron@veron.ch>
NOTE: Patch rebased and reword title according with QA comment 4
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Tue, 29 Mar 2016 06:59:12 +0000 (06:59 +0000)]
Bug 16152: Rename column to Actions
To test:
1) Go to Tools -> Label Creator -> Manage label batches
2) Confirm table heading is now 'Actions'
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Tue, 29 Mar 2016 07:09:10 +0000 (07:09 +0000)]
Bug 16153: Adding "actions" class to Label Creator table actions so the buttons dont wrap
To test:
1) Go to Tools -> Label Creator
2) Confirm that the actions column for the table on each management page (Manage label batches, Manage layouts, Manage label templates, Manage printer profiles) does not wrap on narrow browser windows.
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Tue, 29 Mar 2016 23:51:02 +0000 (23:51 +0000)]
Bug 16163: Show message if there are no dictionary definitions
To test:
1) Go to Reports -> View dictionary
2) Ensure you have no definitions
3) A message should show saying 'There are no saved definitions. Add a definition to the dictionary.'
4) Click the link to add a definition. Confirm this takes you to the form to add a new definition.
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Wed, 10 Feb 2016 16:21:40 +0000 (17:21 +0100)]
Bug 11498 - Prevent bypassing sco timeout with print dialog
This patch prevents bypassing the self check timeout with the print dialog.
To test:
- Set syspref 'WebVasedSelfCheck' to 'Enable'
- Set syspref 'SelfCheckoutReceivePrompt' to 'Show'
- Set syspref 'SelfCheckTimeout' to 20 seconds
- Apply patch
- Go to SCO page (/cgi-bin/koha/sco/sco-main.pl)
- Enter card number
- Click 'Finish'. Dialog "Would you like to pritn a receipt?' appears.
- Confirm printing without waiting 20 seconds
=> Result: Print slip, SCO page shows 'Please enter your card number'
- Enter card number again
- Click 'Finish'. Dialog "Would you like to pritn a receipt?' appears.
- Wait > 20 seconds (value of SelfCheckTimeout) and then confirm.
=> Result: Message appears "Timeout while waiting for print confirmation"
- Click on OK.
=> Result: Self checkout page refreshes (shows 'Please enter your card number')
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=11497
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Tue, 29 Mar 2016 23:27:23 +0000 (23:27 +0000)]
Bug 13132: Add confirm dialog for deleting reports from the reports toolbar
To test:
1) Go to Reports -> Use saved (or build a new one if you have none saved)
2) Click on the Actions drop down and confirm that when you click Delete from here, a confirm message shows up. Click Cancel.
3) Click Show in the drop down menu
4) Click Delete in the Reports toolbar. Confirm you now get a confirm message. Clicking Cancel will cancel the delete, and clicking OK deletes the report and takes you to the saved reports page.
Spponsored-by: Catalyst IT Signed-off-by: Magnus Enger <magnus@libriotech.no>
After applying the patch I get a JavaScript popup confirmation when
I click on the delete button, in the Show, Edit and Run views. Nice!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Wed, 30 Mar 2016 10:30:01 +0000 (11:30 +0100)]
Bug 15323: Use fixtures for the active currency
prove t/Prices.t
fails after bug 15084 has been pushed
It's caused by
commit 1538e9ecf47642c4974693ff499c3e95e4d71977
Bug 15084: Replace C4::Budgets::GetCurrencies with
Koha::Acquisition::Currencies->search
Koha::Number::Price->_format_params calls
Koha::Acquisition::Currencies->get_active, which requests the DB.
The currency data should be mocked.
Test plan:
sudo service mysql stop
prove t/Prices.t
should return green
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Patch works as expected and passes the qa-tools tests.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Wed, 23 Mar 2016 21:53:44 +0000 (21:53 +0000)]
Bug 15793 - UX of circulation patron search with long lists of returned borrowers
Okay how about this:
This patch has no floating toolbar or names styled as links. I've removed the radio buttons. The row is clickable and will redirect you to the user's page.
EDIT: This patch makes the cursor a pointer when hovering over the patrons. The row will also be highlighted on hover to make it even clearer.
EDIT2: Removes unnecessary 'Select' button
To test:
1) Put in a patron search that will bring back a long list of patrons (ie the letter 'a')
2) Select a patron by clicking anywhere on the row - confirm you are taken to the correct patron page
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Submit button removed, patron selection on this screen much better for long lists (and short ones as well.)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Tue, 8 Mar 2016 09:53:35 +0000 (09:53 +0000)]
Bug 16004: Replace items.new with items.new_status
The items.new column is badly named, the Koha::Item->new accessor will
never returns this value, but the constructor will be called instead.
This patch renames it with new_status to avoid the ambiguity.
Test plan:
0/ Do not apply this patch
1/ Define some rules in the "Automatic item modifications by age" tool
with at least one items.new field used
2/ Apply this patch
3/ Execute the update DB entry
4/ Reload the tool page and confirm that the changes have been taken
into account
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 16172: fix OAI Server tests broken by bug 15946
This patch makes t/db_dependent/OAI/Server.t test for the correct
schema and metadata namespace.
To test:
- Run
$ prove t/db_dependent/OAI/Server.t
=> FAIL: Tests fail due to differences in the output.
- Apply the patch
- Run
$ prove t/db_dependent/OAI/Server.t
=> SUCCESS: Tests now pass
- Sign off
Regards
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
charles [Mon, 21 Mar 2016 19:01:36 +0000 (15:01 -0400)]
Bug 16007: Adding back column 'letternumber' to table 'overduerules_transport_types'
Bug 13624 definitely broke the master by removing the column `overduerules_transport_type`.`letternumber` from kohastructure.sql.
This patch aims to fix the problem by adding the column back on systems which had their 'letternumber' removed.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 16160: Fix t/../www/search_utf8.t for layout change
Some of the include files in tools/manage-marc-import.tt introduced a new form object
so the form index for the tests needed to be changed to match the new layout.
While testing this I also found that due to the new record_type input in stage-marc-import.tt
the tests would fail if run on an instance with already imported stuff (i.e. the import id
was defaulting to zero). This might have been the cause of some random failures in jenkins
befire we started to DROP / re-CREATE the DB.
To test:
- Run (on kohadevbox:ansible)
$ sudo koha-shell kohadev
$ cd kohaclone
$ prove t/db_dependent/www/search_utf8.t
=> FAIL: mainsubmitform is not found, and the tests hang
- Apply the patch
- re-run the tests:
$ prove t/db_dependent/www/search_utf8.t
=> SUCCESS: Tests now pass!
- Sign off
Regards
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Tue, 29 Mar 2016 07:14:33 +0000 (08:14 +0100)]
Bug 16151: Restore the ability to place holds from lists at the OPAC
This patch fixes a bug introduced by bug 14544.
Holds can not be placed from lists at the OPAC, the action results in a
crash:
Can't call method "field" on an undefined value at
/home/koha/src/C4/Items.pm line 1504.
at /home/koha/src/opac/opac-reserve.pl line 601
Before 14544, the checkboxes were named 'ACT-$BIBNUM', something like
REM-4242. Now we can retrieve the biblionumber from the value.
Test plan:
Select a public list
check some titles and click on the 'Place hold' link
you should able to process the reservation
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Hector Castro [Fri, 5 Feb 2016 06:40:51 +0000 (00:40 -0600)]
Bug 14304: RDA: Intranet display link in XSLT for 264 field to reflect Zebra indexing
This patch add display link in XSLT for 264 for bug 14198 and reflect the
Zebra indexing 'Provider' in detail page for Intranet.
Test plan
1) Update zebra index if no Provider: index exist
2) Do a search by Provider:
3) Goto detail page for a record with 264
4) Look that there no display link for 264 field.
5) Apply the patch
6) Reload the page, notice about the link, click the link an confirm
the new index Provider works fine
7) Test with multiple records with 260 and 264, if you prefer follow test plan
for bug 14734
8) Access an RCAA2 record just with 260 field
9) Notice that 260 has been updated with Provider index too.
NOTE: The intention of Provider index -according with documentation- is
to collect multiples fields including 260, 264, 270, and 257
Sponsored-by: Universidad de El Salvador Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 22 Dec 2015 23:16:31 +0000 (23:16 +0000)]
Bug 15413: Adding colons where appropriate
To test:
Apply patch and go to pretty much every page on the Intranet - look out
for labels on forms etc where there should be colons but aren't. If you
see any that I've missed but I'm 99% sure I got all of them! Make sure
to click through some forms where creating a new thing involves
continuing the submission on multiple pages.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased on current master and checked all changed pages.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Wed, 23 Mar 2016 22:25:33 +0000 (22:25 +0000)]
Bug 16139: Renaming 'Unseen since' column to 'Last seen'
To test:
1) Go to Tools -> Inventory/Stocktaking
2) Submit empty form to bring back all records (or specify, up to you)
3) Notice column name 'Unseen since'
4) Apply patch and go back to Inventory/Stocktaking, resubmit form
5) Confirm column name is now 'Last seen' and makes more sense
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Thu, 24 Mar 2016 00:37:10 +0000 (00:37 +0000)]
Bug 16141: Making Transfers to Receive action a button
To test:
1) Go to Circ -> Transfer to Receive
2) Confirm 'Cancel transfer' now shows as a button and works as expected
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Thu, 24 Mar 2016 01:20:30 +0000 (01:20 +0000)]
Bug 16142: Making 'Order' a button for New Order Suggestions
To test:
1) Go to Acquisitions and find a vendor
2) Add to a basket from a suggestion
3) Confirm that 'Order' next to the suggestions looks like a button and works as expected
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
projects / koha.git / log