David Cook [Mon, 7 Jun 2021 00:14:55 +0000 (00:14 +0000)]
Bug 28519: Put CGI::Session::Serialize::yamlxs in lib directory
This patch adds a "lib" directory to the source tree which gets
mapped to the same directory as "C4" and "Koha" for single and
standard installations.
CGI::Session::Serialize::yamlxs is put into this "lib" directory.
This patch also includes some changes so that dev/git installations
work as well.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Wed, 2 Jun 2021 15:20:08 +0000 (15:20 +0000)]
Bug 28503: Compare item homebranch to patron branch when hold policy set to 'from_home_library'
This fixes an issue in the way we calculate the check for hold policy 'from_home_library'
Currently we change the comparison based on ReservesControlBranch, however, that should
only control the rule we fetch, not how we compare
When ReservesControlBranch is set to "patron's home library" we compare the patron's branch to
the patron's branch, this is useless and means we pass the check for all branches all of the time
We should instead compare the patron's branch to the item's branch, and only fetch the rule using ReservesControlBranch
To test:
1 - Have a record with an item from library A and library B
2 - Set the 'Default checkout, hold and return policy'->Hold policy->From home library for all libraries
and ensure you have no branch specific/itemtype specific rules set
3 - Attempt to place a hold on the record for a patron from library B
4 - Note that only the library B item is holdable - place a title level hold (do not choose an item)
5 - Check in the item from library A
6 - It fills the hold - This is incorrect - ignore the hold
7 - Apply patch
8 - Restart all the things
9 - Check in the item from library A
10 - No hold found
11 - Check in the item from library B
12 - Hold found, correctly
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 28503: Clarify what ReservesControlBranch controls
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Wed, 2 Jun 2021 15:05:08 +0000 (15:05 +0000)]
Bug 28503: Unit tests
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 7 Jun 2021 16:02:35 +0000 (16:02 +0000)]
Bug 28488: Javascript error in self-checkout (__ is not defined)
This patch adds inclusion of the internationalization JavaScript which
is required by the newest version of the DataTables include. It
references the double-underscore function provided by i18n.js.
To test, apply the patch and log into the self-checkout system as a user
with checkouts. The table of checkouts should display correctly and
there should be no JavaScript errors in the console.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sat, 5 Jun 2021 14:08:46 +0000 (16:08 +0200)]
Bug 28518: Display missing inputs for "Return to the last advanced search"
When more than 3 search terms are passed on the advanced search form,
the "Return to the last advanced search" feature does not display them.
Test plan:
Perform an adv search at the OPAC, enter more than 3 terms, launch the
search, click the "Return to the last advanced search" link and confirm
that all the entries are there.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 11 Jun 2021 11:25:57 +0000 (13:25 +0200)]
Bug 28383: Fix itemsearch when accessed from the login form
There are params here (credentials), we need to test for the existence of $format.
Test plan:
logout
access /cgi-bin/koha/catalogue/itemsearch.pl
Login
=> Without this patch you get a 500 (because we hit the exit statement)
=> With this patch you see the items search form.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Katrin Fischer [Tue, 1 Jun 2021 04:43:23 +0000 (04:43 +0000)]
Bug 28467: (QA follow-up) Remove errorenous space in borrowers.lastseen
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 28467: Update wording of TrackLastPatronActivity syspref
To Test:
1 - look up TrackLastPatronActivity
2 - Read it, be dissatisfied with it
3 - apply patch, restart, reload page
4 - be happier with the new wording
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Joonas Kylmälä [Tue, 8 Jun 2021 08:14:20 +0000 (11:14 +0300)]
Bug 28520: Allow creating a transfer back automatically if a hold is canceled during transit
This fixes regression caused by "Bug 12362: Cancel transfer with hold
cancelation" where cancelled hold's transfer didn't show up in
intranet and opac because it create a new transfer that was not yet
put in in-transit state. The original idea of bug 12362 was to be able
to trigger transfer back home if a hold was cancelled (a regression
caused by bug 26078). However, we can do it more simply by setting the
$validTransfer variable true in the item check-in code when we are
dealing with Reserve transfers. More down in the AddReturn() code
there is also a check "and !$resfound" to make sure we only try to
trigger the transfer back home automatically if there is no hold
waiting at the current location the item arrived in.
It should be noted however that now we only display generic message
for the automatic transfer reason. Bug 12362 made the return display
as the reason "Transfer was cancelled whilst in transit". However,
since this fixes the original regressions caused by bug 26078 and
restores similar behaviour to that I think giving a more descriptive
message for example regarding a hold being cancelled can be considered
a further enhancement.
To test:
1) Apply patch
1) Have biblio with item in branch A
2) Create a new hold with a pickup library to branch B
3) Check-in the item at branch A and confirm the hold and transfer
4) Cancel the hold
5) Check-in the hold at branch B and notice it prompt to return it to
branch A
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Joonas Kylmälä [Tue, 8 Jun 2021 07:55:52 +0000 (10:55 +0300)]
Bug 28520: Bring back TransferCancellation reason handling from reverted Bug 12362
The code from Bug 12362 was reverted but there might be still in
database transfers with the reason 'TransferCancellation' so we need
to restore the code to handle displaying that information.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This commit was part of a series adding adding reverse transfers, i.e.
transfers that were created for transfers that were cancelled and
we wanted the item to return back to its sending library. This however
hid the information about transfer happening and we need another approach
to the problem.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This commit was part of a series adding adding reverse transfers, i.e.
transfers that were created for transfers that were cancelled and
we wanted the item to return back to its sending library. This however
hid the information about transfer happening and we need another approach
to the problem.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Rebased-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
JD amended patch: restore Koha::Item::Transfer->from_library (we are
adding tests in a future patch).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This commit was part of a series adding adding reverse transfers, i.e.
transfers that were created for transfers that were cancelled and
we wanted the item to return back to its sending library. This however
hid the information about transfer happening and we need another approach
to the problem.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Thu, 6 May 2021 13:14:24 +0000 (14:14 +0100)]
Bug 24434: Add 'WrongTransfer' to cancellation_reasons
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Mon, 17 May 2021 09:42:04 +0000 (10:42 +0100)]
Bug 24434: Submit on print slip
This patch ensures that the print slip option on the WrongTransfer modal
also submits the form and thus triggers the actual transfer of the item.
We also prevent a double transfer submission (and thus a cancellation
line appearing in the branchtransfers table) for the case where a
transfer back home is triggered.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Mon, 10 May 2021 09:11:19 +0000 (10:11 +0100)]
Bug 24434: Unit tests for updateWrongTransfer
Add unit tests to cover updateWrongTransfer
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 24434: (QA follow-up) Remove tab character
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Mon, 10 May 2021 08:12:38 +0000 (09:12 +0100)]
Bug 24434: Add Unit Tests for relations
This patch adds unit tests for the newly introduced to_library (and also
add the missing test for the existing from_library).
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Thu, 6 May 2021 12:53:51 +0000 (13:53 +0100)]
Bug 24434: Reinstate updateWrongTransfer
This patch re-instates the call to updateWrongTransfer to ensure the
transfer line is updated to reflect the new frombranch.
Test plan
note: when applying the patches, also update the database
1/ Check an item out from it's home library
2/ Check the item in at another library
(with AutomaticItemReturn system preferences enabled)
2a/ Accept the transfer and note we now have a transfer present from the
items check-in library to it's home library
3/ Check the item in at a third library
3a/ Note you are asked to return the item to it's home library.
3b/ With the patch applied, the modal title should highlight that a
'Wrong transfer' was detected.
4/ Go to the item record and note the holding library has been updated
to reflect where the item was most recently checked in.
4a/ With the patch applied the item status should reflect the last
checked in branch as the 'from' branch of the transfer.
5/ check-in from a 4th library, but use the 'Print slip' option for
accepting the transfer and confirm that also works.
6/ check-in from a 5th library, but use the 'Cancel' option and check
that this results in the item staying at it's current location and the
final transfer having been cancelled.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Alexis Ripetti [Thu, 13 May 2021 15:09:05 +0000 (11:09 -0400)]
Bug 28350: Fix borrowernotes sorting for patron search
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 28338: Default to holding branch to save clicks
This patch makes request.pl pass the holding library object to the
template, if it is a valid pickup location for the item. This way, the
template can set a good default to save clicks.
To test:
1. Have "Hold pickup library match" set to "Item's home library"
2. Have a record with items in three different branches. For example:
- item1: homebranch: MPL, holdingbranch: MPL
- item2: homebranch: FPL, holdingbranch: FPL
- item3: homebranch: CPL, holdingbranch: IPT
3. Have FPL marked as 'No' for pickup location
4. On the record, open the page for placing a hold for a patron
(acevedo?)
=> SUCCESS: You are presented the regular hold placing page, with an
extra column on the items for pickup location setting
=> SUCCESS: The item2 (on FPL) cannot be selected, there's a clear message
about not having valid pickup locations
=> FAIL: The other ones don't have anything pre-selected on the
dropdowns
5. Apply this patch
6. Repeat 4 (go back to the record, etc)
=> SUCCESS: Nothing changed BUT the item with holding branch = MPL has
it set by default in the dropdown.
=> SUCCESS: IPT is not a valid pickup location for item3, so not set by
default in this case.
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 28338: Make item-level holds use locally defined pickup branches
Besides the commit subject, this patch does much more:
- It makes request.pl stop passing a pickup location to
CanItemBeReserved
- It makes the page use the API to render a dropdown for each item, with
their valid pickup locations
- Items with no valid pickup locations have a nice message about why
they are disabled for selection
To test:
1. Apply this patch
2. Choose a biblio for placing a hold
3. Choose a patron
=> SUCCESS: You are presented with a new layout, that includes a
dropdown for choosing each item's pickup location. If an item is not
holdable, it still isn't.
4. Try having an item whose home branch is not marked as a pickup
location
=> SUCCESS: Notice you cannot choose that item
5. CHoose an item, but do not choose a branch, and click 'Place hold'
=> SUCCESS: It shows an alert about the need to choose a pickup location
6. Choose one of the (only possible) pickup locations for the specific
item
7. Place the item level hold
=> SUCCESS: All goes as expected!
8. Sign off :D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 27931: Add GET /items/:item_id/pickup_locations
This patch adds the mentioned route. It does so by:
- Adding the new path in paths.json
- Adding the full route spec in items.json
- Adds a controller method that takes care of the task
To test:
1. Apply this patches
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/items.t
=> SUCCESS: Tests pass!
3. Play with your favourite REST tool. Pay special care to
the AllowHoldPolicyOverride syspref and the expected behaviors.
=> SUCCESS: All works as expected
4. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Wed, 9 Jun 2021 17:59:59 +0000 (17:59 +0000)]
Bug 28538: Insert formatted date if valid
This patch restores the setting of the date from bug 27937 and adds a parsing of the date to
ensure the correct format
To test:
1 - Follow test plan from bug 27937 - it fails
2 - Follow test plan from bug 28351 - it succeeds
3 - Apply patch
4 - Repeat 1-2
5 - both plans pass now
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 4 Jun 2021 10:19:18 +0000 (12:19 +0200)]
Bug 28487: Fallback to default template in overdue_notices
There is no fallback to the "default" language if there is no
language-specific template for the lang of the patron.
I am not really sure why we are not using GetPreparredLetter here (which
defaults), but this needs to be backported into all stable branches and
so as small as possible.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Joonas Kylmälä [Mon, 7 Jun 2021 05:30:35 +0000 (05:30 +0000)]
Bug 28490: Add DBIx schema changes for testing
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Joonas Kylmälä [Wed, 2 Jun 2021 17:37:25 +0000 (20:37 +0300)]
Bug 28490: Bring back accidentally deleted relationship columns
These were in active use before and were accidentally deleted in Bug
26995. This restores those deleted relationship columns.
To test:
1) verify the borrower_modifications, borrowers,
deletedborrowers contain the column exactly like it was before after
applying these patches by comparing to the old kohastructure.sql
version
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Joonas Kylmälä [Wed, 2 Jun 2021 17:22:51 +0000 (20:22 +0300)]
Bug 28490: Comment out the relationship data removing DB update step
These columns that were actively used to store non-patron guarantor
relationship info were dropped incorrectly. In a later patch the
relationship fields will be re-added.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
JD Amended patch: Add a "SKIP" note on the DBrev we commented out
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It was part of a patch set that removed actively used data and must be
therefore reverted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It was part of a patch set that removed actively used data and must be
therefore reverted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It was part of a patch set that removed actively used data and must be
therefore reverted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It was part of a patch set that removed actively used data and must be
therefore reverted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It was part of a patch set that removed actively used data and must be
therefore reverted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Sat, 5 Jun 2021 13:27:02 +0000 (15:27 +0200)]
Bug 28489: Don't deal with encoding during the serialization
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Andrew Nugged [Fri, 4 Jun 2021 19:32:22 +0000 (22:32 +0300)]
Bug 28489: POD - CGI::Session::Serialize::yamlxs for CGI::Session
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sat, 5 Jun 2021 12:50:48 +0000 (14:50 +0200)]
Bug 28489: Add selenium tests
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
JD amended patch: Remove libraries the tests created
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Thu, 3 Jun 2021 09:28:57 +0000 (11:28 +0200)]
Bug 28489: Modify sessions.a_session from longtext to longblob (kohastructure.sql)
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Andrew Nugged <nugged@gmail.com> Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Wed, 2 Jun 2021 14:05:17 +0000 (16:05 +0200)]
Bug 28489: Modify sessions.a_session from longtext to longblob
This column contains serialized data, it should be a blob.
And it fixes encoding issues.
Test plan:
1. Apply patch and run updatedatabase
2. In $KOHA_CONF make sure that you have
<strict_sql_modes>0</strict_sql_modes>
3. Create 2 libraries:
a. TESTÄ/Testä
b. TEST✓/Test✓
4. Go to the staff interface, change your library to Testä, then
navigate to a few other pages, make sure there is no encoding problem
with the library name in the top right corner
5. Do the same with Test✓
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com> Signed-off-by: Andrew Nugged <nugged@gmail.com> Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Martin Renvoize [Wed, 19 May 2021 08:37:35 +0000 (09:37 +0100)]
Bug 28382: Set trigger to 'Reserve' when actioning a reserve transfer
This patch sets the transfer trigger to 'Reserve' when the staff user
confirms they are transfering to fulfil a reserve.
Test plan
1 - Place a hold for delivery at Library B
2 - Sign in at Library A
3 - Browse to Circulation->Transfers
4 - Attempt to transfer an item on the title with the hold to Library B
5 - You get a notice that hold was found
6 - You have the option transfer the for the hold - click it
7 - Confirm hold is set to transit and transfer generated
8 - Check the branchtransfers table and confirm the 'reason' is
'Reserve' not 'Manual'.
Signed-off-by: David Nind <david@davidnind.com>
JK: fix typo resver -> reserve Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Joonas Kylmälä [Tue, 15 Jun 2021 08:56:43 +0000 (11:56 +0300)]
Bug 27064: Correct transferbook.t tests to reflect new behaviour of transferbook()
The transferbook() behaviour was changed so that it only allows
transferring the item with a reserve if ignore_reserves=1 is passed to
it. The tests are changed here to reflect that. Note that however the
tests were buggy already before this change because the transfer's
"from" and "to" branches were the same and so the transfer should have
failed due to the error DestinationEqualsHolding, but futher though
the transferbook() code was buggy and it override the
DestinationEqualsHolding checking totally if there was a transfer! So
the tests were earlier working due to a bug in transferbook().
To test):
1) Make sure the new test scenarios make sense
2) prove t/db_dependent/Circulation/transferbook.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Joonas Kylmälä [Mon, 7 Jun 2021 14:07:04 +0000 (17:07 +0300)]
Bug 27064: (QA follow-up) Add error message only if we have one defined
This moves the DestinationEqualsHolding error message addition to if
clause so the value is added to %err hash only when there is actually
an error. Then we only append to the @errmsgloop array the error
message if one was defined.
To test:
1) Create a hold request to a pickup library where the item currently
is not
2) Add transfer to the pickup library using branchtransfers.pl and
notice without this patch we get and empty message box but with this
patch we don't get it.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Thu, 6 May 2021 15:31:39 +0000 (16:31 +0100)]
Bug 27064: (QA follow-up) Pass 'replace' through to Koha::Item::Transfer->cancel
The `replace` option found in Koha::Item->request_transfer should be
passed through to Koha::Item::Transfer->cancel and prevent any reverse
transfers from being queued in such cases.
This prevents modItemTransfer from adding superflous reverse transfers
whenever it is used.
Test plan
1/ Run t/db_dependent/Koha/Item.t to prove the new tests pass
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Mon, 17 May 2021 14:51:46 +0000 (15:51 +0100)]
Bug 27064: (QA follow-up) Do not create transfer prior to accepting it
This patch prevents the cancellations we were seeing. Transfers were
being created pre-emtively for reserves in branchtransfers before the
librarian had selected their prefered action. As such, we were getting
double lines in the branchtransfers table.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Martin Renvoize [Mon, 10 May 2021 10:06:36 +0000 (11:06 +0100)]
Bug 27064: (QA follow-up) Do not send tobranchcd twice
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Fri, 20 Nov 2020 11:34:11 +0000 (11:34 +0000)]
Bug 27064: Only allow transferring a hold from the transfers page
These patches replace the 'Waiting' button on the transfers page with a 'Transfer' button
and correct some other related problem by passing the hold object to the template and
using that to fetch patron info as well as passing the reserve_id through to ensure the correct hold is
affected at all times
To test:
1 - Place a hold for delivery at Library B
2 - Sign in at Library A
3 - Browse to Circulation->Transfers
4 - Attempt to transfer an item on the title with the hold to Library B
5 - You get a notice that hold was found (missing patron/branch info)
6 - You have the option to set the hold waiting - click it
7 - The transfer is generated and marked completed
8 - The hold is marked as waiting, but the item is still at Library A and no transfer is active
9 - The patron is notified that the hold is waiting
10 - Revert the hold or cancel and place a new one
11 - Apply patches
12 - Attempt transfer again
13 - You now have the option to transfer the hold
14 - Click that
15 - Hold is in transit and transfer is generated correctly
16 - Transfer again and choose 'cancel'
17 - Confirm hold is cancelled and transfer generated
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Petro Vashchuk [Thu, 20 May 2021 13:12:18 +0000 (16:12 +0300)]
Bug 28204: Fix table highlighting on the items table
Fix table highlighting at
/cgi-bin/koha/cataloguing/additem.pl?biblionumber=XXXX
Every odd row of the table didn't get highlighted with the yellow color
when you tried to edit it previously, this patch fixes that.
That happened because every odd row had different coloring style that
was overwriting yellow highlight.
How to reproduce:
1) Head over to the
/cgi-bin/koha/cataloguing/additem.pl?biblionumber=XXXX,
where XXXX is id of some bilbio record that has more than one
biblio item.
2) Press the "Action" button of the first (or any other odd numbered)
biblion item, and from the dropdown menu select "edit" option.
3) Notice that it doesn't highlight it with yellow color.
4) Now do the same but with second biblio item (or any even numbered
item).
5) Notice that it highlights it with the yellow color.
6) Apply the patch. Do yarn build to compile css.
7) Make sure that every row of the table that you edit gets properly
highlighted with the yellow color.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
JD Amended commit title
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 28171: Restore previous sorting behaviour for Serial enumchron column
Before Bug 27980 the sorting was done either by item's publisheddate
if it existed in at least one item. If it didn't exist then the
sorting was done using "h - Serial Enumeration / chronology"
field. This restores this sorting functionality in catalogue/detail.pl
page.
To test:
1. Create a serial subscription for a biblio, make sure to enable the
option "Create an item record when receiving this serial"
2. Receive two serials, so that they have different received dates
and check that the items are now created to the biblio
3. Add now two additional items with one having "A" and other having
"B" in the "h - Serial Enumeration / chronology" field.
4. Try sorting and notice the items with publisheddate are being
sorted and ones without stay in the order they happened to be
5. Remove the items with publisheddate and notice that now items with
"A" and "B" get sorted correctly
Signed-off-by: Christian Nelson <christian.nelson@tritonia.fi> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Christian Nelson <christian.nelson@tritonia.fi> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 18 May 2021 07:41:40 +0000 (09:41 +0200)]
Bug 28353: Display a list of items that cannot be deleted
We used to display a list of items that cannot be deleted (checked out
or on hold) on the Batch item deletion tool.
With bug 8132 we improve the error handling, but the info is spread in
the table.
This patch adds, at the top of the page, the list of items (barcode)
that cannot be removed.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 28496: Club holds pickup locations don't come from the API
This patch fixes a issue that is generated by the fact different inputs
were reusing the same id.
To test:
1. Have a club with some enrollments
2. Make sure you have your circ rules to allow any library be a pickup
location.
3. Search for a biblio
4. Try placing a club hold
=> FAIL: The dropdown only has the (currently) logged in library.
5. Apply this patch
6. Repeat 3-4
=> SUCCESS: The dropdown has all the options
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Fri, 28 May 2021 12:02:19 +0000 (12:02 +0000)]
Bug 28482: Refresh line from DB to get stored value
Before checking if the amount is 0 we get the stored value from the DB. This
ensures any amounts beyond the 6 digit precision we store will be removed.
To test:
1 - Add a processing fee of 15 to an itemtype
2 - Add an item of that type, set the replacement fee to 12.63
3 - Set MarkLostItemsAsReturned to 'On payment' only
4 - Set WhenLostChargeReplacementFee to 'Charge'
5 - Checkout the item to a patron
6 - Mark the item lost
7 - Reload patron and confirm they are charged 27.63
8 - Go to accounting, pay amount, pay 27.63
9 - Item is still lost and not returned
10 - Apply patch
11 - Checkin the item
12 - Checkout to another patron
13 - Mark lost
14 - Patron charged 27.63
15 - Pay amount, 27.63
16 - Item returned!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Fri, 28 May 2021 12:02:09 +0000 (12:02 +0000)]
Bug 28482: Unit test
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Andrew Nugged [Fri, 28 May 2021 10:36:45 +0000 (13:36 +0300)]
Add and fix few messages in second plural form for pl, be, ru languages
Fixed missed "singular" message which had word "one" instead of "{count}" for uk and ru because it should be used not only for "1" but also for "21, 31, ...".
Add formula for 2/3 form for Russian (Plural-Forms:...)
and Belarusian and Ukrainian formulas normalized to be the same for all three languages
This patch fixes the value of a hidden input that was mistakenly
changed and prevents search all headings from working.
To test:
1. Open the authorities section in the OPAC
2. Choose the 'Search all headings' tab
3. Search for 'a'
=> FAIL: No results
4. Empty the search box, and make sure 'Search all headings' is selected
=> SUCCESS: There are authority records
5. Apply this patch
6. Reload the page
7. Retry 3 and 4
=> SUCCESS: Searching is back!
8. Sign off :-D
Sponsored-by: Asociación Latinoamericana de Integración Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 28364: Make log4perl.conf belong to the instance user
This patch makes koha-create generate the log4perl.conf file for the
instance, belonging to the instance user. This is done in order to have
the z3950 responder work.
My original idea was to make the responder accept a '-g' parameter but
that is not supported by Net::Z3950::Responder. Also, as the library
insists on handling the PID file on its own, it wont' work to handle the
responsability to start-stop-daemon. The only solution I found was
making the fiel be owned by the instance user.
1. Create a Koha instance:
$ koha-create --create-db test
2. Initiate all the things
3. Enable and start the z3950 responder
$ koha-z3950-responder --enable test
$ koha-z3950-responder --start test
4. Try doing some search:
$ yaz-client localhost:2100
=> FAIL: you get:
Connecting...OK.
Sent initrequest.
Target closed connection
Z> quit
See you later, alligator.
=> FAIL: No warning or anything on the logs
5. Stop the daemon
$ koha-z3950-responder --stop test
6. Run it manually:
$ PERL5LIB=/usr/share/koha/lib KOHA_CONF=/etc/koha/sites/test/koha-conf.xml \
/usr/bin/perl /usr/share/koha/bin/z3950_responder.pl \
-c /etc/koha/sites/test/z3950 -u test-koha \
-p /var/run/koha/test/z3950-responder.pid -d test-koha-z3950
7. Repeat the 4, on a separate terminal (no daemon mode this time)
=> FAIL: You get:
Cannot open /etc/koha/sites/test/log4perl.conf (Permission denied) at /usr/share/perl5/Log/Log4perl/Config/BaseConfigurator.pm line 51.
8. Change the file owner:
$ chown test-koha /etc/koha/sites/test/log4perl.conf
9. Repeat 6, and 4
=> SUCCESS: It doesn't break anymore!
10. Apply this patch
11. Create a new instance, with the patched koha-create:
$ debian/scripts/koha-create --create-db test1
12: Check the generated files permissions:
$ ls -l /etc/koha/sites/test2
=> SUCCESS: You get:
-rw-r----- 1 root test2-koha 19720 May 17 13:26 koha-conf.xml
-rw-r----- 1 test2-koha test2-koha 2825 May 17 13:26 log4perl.conf
-rw-r----- 1 root test2-koha 2014 May 17 13:26 zebra-authorities-dom.cfg
-rw-r----- 1 root test2-koha 2279 May 17 13:26 zebra-biblios-dom.cfg
-rw-r----- 1 root test2-koha 26 May 17 13:26 zebra.passwd
13. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a 'summary' entry to all routes and verbs. This way,
ReDoc will display a human-friendly description of the route, instead of
the operationId.
To test, repeat the testing steps in the previous patch, and notice that
we now have good descriptions.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch starts the work of curating the spec documentation-related
aspects. It doesn't involve any functional change on the API, just
labels (used to render docs) and some descriptions basis is added.
- A top level 'tags' entry is added to swagger.yaml.
- The 'name' attribute is left with double quotes. This is on purpose,
to differentiate from 'x-displayName' which is the actual text to be
displayer and should be handled by documentation folks, not us, devs
:-D
- I add a very limited 'description' attribute there. It is the top
level description of the section. For example the description for the
'Biblios' section is 'Manage bibliographic records'. As it expects
Markdown, anything we want can be added there.
- Some labels have been tweaked in paths, to rollback the decision of
making the labels in paths more end-user friendly. We don't want them
to be typed much, and I picked what we use the most: snake_case.
- The order in which things are displayed, is the one we specified on
the swagger.yaml file. The 'batch import profiles' one is left at the
bottom on purpose. But this is subject to discussion. As a general
rule, I put them all in alphabetical order (on the x-displayName label
I mean).
I submit early before family duties so others can pick where I left in
the morning. So:
TODO:
- I'm not sure what's best for Advanced editor macros. My bet is we
should define a 'Macros' label, and use a summary on the routes
themselves to specify this are not just 'macros', but advanced editor
macros. Look at the return claims paths to understand how I propose to
use the 'summary' attribtue.
- I understand how we use 'rotas', but someone more familiar with the
terminology,... please... step in.
- Related to the first item here, we need to add summary to all routes,
so ReDoc doesn't display the operationId anymore. Again, I put an
example in Return claims that we can follow.
To test:
1. Have KTD running
2. Open your browser at:
http://localhost:/8080/api/v1/
3. Save the page as spec.json in some known dir
4. Go to that dir and run:
$ docker run -it --rm -p 8083:80 \
-v $(pwd)/spec.json:/usr/share/nginx/html/swagger.json \
-e SPEC_URL=swagger.json redocly/redoc
5. Open your browser at
http://localhost:8083
=> SUCCESS: You see the docs
6. Look at the list of 'categories' on the left
=> FAIL: They look a bit weird
7. Apply this patch
8. Ctrl+c on the terminal running docker
9. Reload plack
10. Repeat 2 through 6
=> SUCCESS: Wow, things look better!
11. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Thu, 27 May 2021 12:25:11 +0000 (14:25 +0200)]
Bug 26734: Rename activethemes with availablethemes
There was an existing call to $self->activethemes that behave as setter:
85 $self->activethemes($activethemes);
I am not sure what are the side-effects but it does not look good.
It caused warning in the logs:
Use of uninitialized value $interface in string eq at /kohadevbox/koha/C4/Templates.pm line 279.
Use of uninitialized value $interface in string eq at /kohadevbox/koha/C4/Templates.pm line 280.
Use of uninitialized value $interface in string eq at /kohadevbox/koha/C4/Templates.pm line 282.
Use of uninitialized value $lang in concatenation (.) or string at /kohadevbox/koha/C4/Templates.pm line 296.
Use of uninitialized value $lang in concatenation (.) or string at /kohadevbox/koha/C4/Templates.pm line 296.
Use of uninitialized value $lang in concatenation (.) or string at /kohadevbox/koha/C4/Templates.pm line 296
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Mon, 15 Mar 2021 14:07:26 +0000 (14:07 +0000)]
Bug 27899: Missing description for libraryNotPickupLocation on request.pl
This patch adds text to the holds template in the staff client so that
if a particular item is at a library which isn't a hold location the
error message is descriptive.
To test, apply the patch and go to Administration -> Libraries.
- Change one of your libraries so that "Pickup location" is set to
"No."
- Locate a title in the catalog which has an item at that location.
- The "pick up at" list will exclude the library so and additional steps
must be taken to get the message
- Select a patron and set their library to the one we can't pick up at.
- Start the process of placing a hold on the title.
- After selecting the patron to place the hold for, look at the table of
items under "Place a hold on a specific item."
- The item located at the library you modified should show an error
message in the "Hold" column, "Library is not a pickup location."
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Martin Renvoize [Tue, 25 May 2021 12:59:31 +0000 (13:59 +0100)]
Bug 28442: Fix 'accessibility_advocate' for current release
The accessibility_advocate block was positioned incorrectly so wasn't
appearing properly for the current stable releases, only the
development/maintainter block.
This patch fixes that issue
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Martin Renvoize [Tue, 25 May 2021 08:29:48 +0000 (09:29 +0100)]
Bug 28442: Update template for new roles
We have multiple accessibility advocates this cycle, so we needed to
adapt the template. I've also added the meeting facilitator as a case
but not added to the team block as a whole.. seeking opinions, perhaps
wait and see if it lasts more than a cycle before adding it fully?
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Martin Renvoize [Tue, 18 May 2021 14:57:29 +0000 (15:57 +0100)]
Bug 28368: Add fallback language for anonymous payment receipts
This adds a fallback for when a payment is made anonymously to allow
printing a receipt in the staff members current session language.
Test plan
1. Set `EnablePointOfSale` and `UseCashRegisters`
2. Add new cash register`
3. New debit type that 'can be sold'
4. Make a sale (via Point of Sale) using the above debit type.
5. Attempt to 'print receipt' from the subsequent prompt
6. Not the ISE: Can't call method "lang"
7. Apply patch
8. Attempt to 'print receipt' again, this time it should work.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 25 May 2021 07:20:45 +0000 (09:20 +0200)]
Bug 28158: Remove additional backgroundjob related code
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 24 May 2021 14:53:48 +0000 (16:53 +0200)]
Bug 28158: Remove backgroundjob from batchMod
== Test plan ==
1 - In the default framework make sure the 952$1 is visible in opac & catalog & editor
2 - Set WhenLostChargeReplacementFee to charge
3 - Set MarkLostitemsAsReturned to return from batch modification
4 - Find/edit an item with a replacement cost
5 - Check out the item to a patron
6 - Batch modify the item
7 - Set the lost status
8 - Item is not returned or charged
9 - with the patch, it is
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Thu, 17 Sep 2020 18:34:21 +0000 (18:34 +0000)]
Bug 15720: Add connexion user and password options to connexion daemon
Currently the connexion daemon does not utilize the user and password passed in the requests, it expects a
user and password to be defined in the config file and for that user to be a valid Koha user with
cataloging permissions.
With that user in place all requests to the daemon are authorized.
As the connections are over TCP we allow defining a new connexion user and password to protect Koha account information.
If not defined current behaviour is preserved. Connexion user and password must both be set it either is set.
To test:
1 - Create connexion file and save on the Koha serve
2 - perl misc/bin/connexion_import_daemon.pl -c /kohadevbox/koha/connexion.cnf
3 - Ensure the user specified above (connexuser) exists and has edit catalogue permissions
4 - In another terminal make a request to the server:
echo -en 'U6turtleA9connexionP5shell00024 a62clear00024 4500' | nc -v localhost 8888
5 - The request should succeed and record added to batch (probably the import fails, but not important)
6 - Add to config file
connexion_user:conuser
7 - Stop and restart the daemon - it should fail on missing connexion_password
8 - Comment out connexion_user and add
connexion_password:conpass
9 - Stop and restart daemon, it fails on missing connexion_user
10 - Uncomment the user and restart
11 - Make another request
echo -en 'U6turtleA9connexionP5shell00024 a62clear00024 4500' | nc -v localhost 8888
12 - It fails 'Unauthorized request'
13 - Make another request
echo -en 'U7conuserA9connexionP7conpass00024 a62clear00024 4500' | nc -v localhost 8888
14 - It succeeds!
Signed-off-by: Allison Blanning <ablanning@hotchkiss.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 17 Mar 2021 10:38:47 +0000 (11:38 +0100)]
Bug 27942: Prevent XSS vulnerabilities in quote-upload
When uploading new quotes the JS variables are not escaped correctly.
Test plan:
Create a new file with the following content (remove the first and last lines containing """):
"""
":this is a source","this is a text"
"this is another ❤one","and another text❤"
"this <script>alert('foo');</script>","and <script>alert('❤');</script>"
"""
Go to Home › Tools › Quote editor
Click Import quote
Select the file
Edit the third line, hit enter
Import quotes
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Thu, 20 May 2021 06:34:48 +0000 (08:34 +0200)]
Bug 20982: Sanitize category to prevent XSS on opac-shelves.pl
== Test plan ==
1. Go to http://localhost:8080/cgi-bin/koha/opac-shelves.pl?category=function(){window.location.href%20=%20%27https://git.koha-community.org/stats/koha-master/authors.html%27}()
2. Note that you are redirected to another website
3. Apply the patch & restart services
4. Repeat the above and you are not redirected
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 25 May 2021 08:34:49 +0000 (10:34 +0200)]
Bug 28385: Use ldapserver only if exists
Fix test
t/db_dependent/Auth_with_ldap.t .. 1/4
# Failed test 'use C4::Auth_with_ldap;'
# at t/db_dependent/Auth_with_ldap.t line 123.
# Tried to use 'C4::Auth_with_ldap'.
# Error: No ldapserver "id="ldapserver"" defined in KOHA_CONF: /etc/koha/sites/kohadev/koha-conf.xml at /kohadevbox/koha/C4/Auth_with_ldap.pm line 55.
# Compilation failed in require at t/db_dependent/Auth_with_ldap.t line 123.
# BEGIN failed--compilation aborted at t/db_dependent/Auth_with_ldap.t line 123.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 28385: ldap server configuration broken since migration from XML::Simple
Bug 28278 removed usage of XML::Simple which had side-affect that
C4::Context->config("ldapserver") returns one more level of hash
based on id of element, so ldap configuration was no longer
available generating error in log:
No ldapserver "hostname" defined in KOHA_CONF: /etc/koha/sites/srvgit/koha-conf.xml
which is very confusing since hostname is there, but we are looking
at wrong place for it.
== Test plan ==
1. Setup an LDAP server with users or use a public one
See https://wiki.koha-community.org/wiki/Ldap_testing
2. Configure Koha to use it, see example config above
3. Go to OPAC
4. Koha doesn't compile due to LDAP config not parsed correctly
5. Apply the patch
6. Koha compiles and page loads
7. Log in successfully with one of the LDAP users
8. Bonus: Try to log-in with a wrong username & a good password and
vice-versa
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The way labels are used with RedDoc, we need to tidy them better. We
should do it with all the routes, but this one is specially noisy on the
UI.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
projects / koha.git / log