Emily Lamancusa [Tue, 19 Mar 2024 18:14:27 +0000 (14:14 -0400)]
Bug 34972: Remove GetOtherReserves
GetOtherReserves attempts to set the waiting/transit status for the next
hold on the list when applicable, but in practice it either leaves the
hold state unchanged, or sets the itemnumber without setting the found
status (erroneously converting bib-level holds to item-level holds).
The latter situation only occurs when the user has been prompted to
confirm, cancel, or revert the hold, and is able to ignore the prompt.
In those situations, the hold's state should not change.
GetOtherReserves does not need to change the hold state, and it does not
do so correctly. Besides that, it does not do much other than call
CheckReserves, and is only used in 3 places.
This patch removes GetOtherReserves, and refactors returns.pl and
C4::Reserves::ModReserveCancelAll to call CheckReserves directly instead.
To test:
1. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
2. Check in an item from that record to fill Patron A's hold
3. Set the hold's expiration date to yesterday by accessing the database
in the command line:
- In a ktd shell prompt, open the db client with koha-mysql kohadev
- UPDATE reserves
SET expirationdate = DATE_SUB(CURDATE(), INTERVAL 1 DAY)
WHERE borrowernumber = <Patron A's borrowernumber>
4. Go to Circulation > Holds Awaiting Pickup, and find the hold in the
"holds waiting past their expiration date" tab
5. Click the "Cancel hold" button in the Actions column next to the hold
(do not check in the book)
6. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
7. Cancel Patron B's hold
8. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
9. Check in an item to fill Patron A's hold
10. Repeat steps 3-5 to expire and cancel Patron A's hold
11. Return to the Holds tab of the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold, and there is no
"Revert transit status" button
12. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
13. Check in an item from that record to fill Patron A's hold
14. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
15. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
16. Click "Ignore" on the modal for Patron B's hold
17. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
18. Apply patch
19. Repeat steps 1-6
--> Note that Patron B's hold is still a bib-level/"next available" hold
20. Repeat steps 7-11
--> Note that Patron B's hold is still a bib-level/"next available" hold
21. Repeat steps 12-17
--> Note that Patron B's hold is still a bib-level/"next available" hold
Make sure correct behavior is unchanged:
22. Cancel Patron B's hold
23. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
24. Check in an item from that record to fill Patron A's hold
25. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
26. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
27. Click "Print slip, transfer, and confirm" on the modal for Patron B's hold
--> Confirm that the information on the slip is correct
--> Confirm that the hold is correctly put in transit
22. Set HoldsAutoFill and HoldsAutoFillPrintSlip to "Do"
23. Place a bib-level hold for the logged-in library
24. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
25. Place a bib-level hold for a different library
26. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly put in transit
27. Change the logged-in branch to match the hold pickup location
28. Check the item in
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
29. Repeat steps 22-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm that Patron B's hold is correctly put in transit
30. Cancel Patron B's hold
31. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
33. Repeat steps 24-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm Patron B's hold is correctly set to Waiting
To test:
1. Apply this patch only
2. prove t/db_dependent/Koha/Holds.t
--> Tests pass
3. Apply the other patch
4. prove t/db_dependent/Koha/Holds.test
--> Tests still pass
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit d71f5272021b54849e5854d3a7b8ecb1f30d9414) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit c4661a1660f2a72393fc75ba83bb7b223e42b078) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 3 Apr 2024 20:35:46 +0000 (20:35 +0000)]
Bug 36508: Refresh patron object when updating category
To test:
1 - Find a ptron, I sued #45 in KTD, note their category
2 - Update them from one category to another using finesunder:
perl misc/cronjobs/update_patrons_category.pl -f ST -t S --finesunder=5.00 --where "me.borrowernumber=45" -v -c
3 - Check their modification log (I told you to enabled BorrowersLog,
right?)
4 - See many fields reported changed
5 - Apply patch
6 - Repeat, but change the to and from options
perl misc/cronjobs/update_patrons_category.pl -f S -t ST --finesunder=5.00 --where "me.borrowernumber=45" -v -c
7 - Note only one column changed in the logs
8 - Ask for unit tests
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit cae2efd69d8ad63822914377733f9819889a0ec1) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 2ff0a6578311f029def133446c99a7c7576b8ae0) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 25 Apr 2024 16:20:53 +0000 (16:20 +0000)]
Bug 36508: Unit tests
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8f359aa72c46eaa493e817d4d099b6548846edf0) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 9659b8cddf28ce3f45d0316fa86bcf8aecc1c16e) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Pedro Amorim [Thu, 11 Apr 2024 10:40:16 +0000 (10:40 +0000)]
Bug 36563: Turn into array only if required
Test plan, apply first patch:
1- Visit item search:
http://localhost:8081/cgi-bin/koha/catalogue/itemsearch.pl
2- Set "Home library" -> "is not" -> "Centerville". Notice you get items
from Centerville.
3- Apply second patch, repeat step 2, notice you now don't get items
from Centervile.
4- Test other use cases, like 'is' and 'is not' for multiple choices
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit eae74ed6d9935ee7247ccd85f9a1d502755ca338) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 0513ffa58e512d149a44a9d4bd4750d182816e48) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 10 Apr 2024 10:04:18 +0000 (12:04 +0200)]
Bug 36563: Dirty fix
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 492d7be2ccba07f47771184fd5cc903383abb63b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit d8ca12b404da1833ed7c8ae51ab69af6086705a6) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Error happens also when one tries to open patrons checkouts from detail page.
Koha doesn't die but table just keeps loading. Solution is to add C4::Reserves
before CheckReserves when it's called from Circulation.pm.
To test:
1. Apply this patch.
2. Try to check out and check in item.
=> Confirm both operations are succesfull.
3. Attempt to open patrons checkouts from patron detail and checkout page.
=> Table should load
Also prove t/db_dependent/Circulation.t.
Sponsored-by: Koha-Suomi Oy Signed-off-by: BabaJaga <babajagawgoglach@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 80beaf875b3645034f5dda37bfadf51a038859cc) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit d26306ed328c1be1c59f33515caa699071a4aacc) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 33832: Allow updating username without changing password on member-password.pl
This patch updates the change password page on the staff interface to
allow for changing the patron's username without changing the password.
If the new password is an empty string we can skip setting the patron's
password and sending the new password to the template.
Test plan:
1. From a patron record tool bar click 'Change password'
2. Notice that if you try to change the user's name without also
changing the password the page just reloads and nothing happens
3. Apply patch and restart_all
4. From the patron record click 'Change password' again
5. Set the user's new username and password eg. '1234Abc' and click
'Save'
6. Confirm that you can log in to the OPAC with the user
7. Return to the patron record and click 'Change password' again
8. This time change just the 'New username field' and click 'Save'
6. Notice that the username is updated
7. Confirm you can log into the OPAC with the new username and the
original password '1234Abcd'
8. Make sure that the change password form still validates passwords
for length and matching errors etc
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e26fc0a3d5a83a7b22f0c3907a98d470b0e2443d) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 34e17b5abad1bac29bc13155cedbe11b7d7fc1ba) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 8 Feb 2024 20:27:14 +0000 (20:27 +0000)]
Bug 36053: Correct input name for item replacement fields
To test:
1 - Follow test plan and use sample record from bug 35912 ( or similar)
2 - Confirm that when the order is saved the replacement price is $0.00
3 - Apply patch, restart_all
4 - Delete previous orders, and stage and add to basket again
5 - Confirm that upon adding orders to basket the replacement price is saved correctly
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 94da493d0eaaec80e42258ec421eb7c5ca1a0dd2) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit f53018dce0fa3db1afacb5914e8ee2e57794296d) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Pedro Amorim [Fri, 9 Feb 2024 09:55:35 +0000 (08:55 -0100)]
Bug 34886: Comment failing tests
These tests highlight the fact that the 'place hold' button visibility in the
search results page **does not** match the 'place hold' button visibility in
the detail page, given the same conditions.
Since that this is a known behavior, these tests should be commented out as they
are failing by design.
Pedro Amorim [Thu, 1 Feb 2024 15:42:12 +0000 (14:42 -0100)]
Bug 34886: Add selenium tests
Tests added to cover different use cases and combinations of circulation rules values for authenticated and unauthenticated users
At the moment, 2 tests are failing, documented on the [DO NOT PUSH] commit.
These 2 failing tests fail for the search results page but pass on the detail page counterpart. Ideally they should match, for consistency sake.
But this may be the use case "details page should be more correct, results page is always an approximation" mentioned by Nick.
More test combinations may be added in the future.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3758a8c05e05b14360560a3e351439e2c4c0364c) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 1af004161d6b13ee33becc18b5a79db13a805bfe) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 28 Sep 2023 12:27:21 +0000 (12:27 +0000)]
Bug 34886: Adjust holdability checks on opac details page
This patch tries to simplify some of the logic here to match that on the search results. When we don't have a patron, we fallback to determining if an item can be held buy determining whether there are any items that don't have holds disallowed at the all libraries level. We also remove items with non-holdable statuses like withdrawn etc (and check some system preferences)
If we don't have a patron, then we are done, however, if we do, then we need to check each item against the policies related to that patron.
This patch also removes two checks at the end:
CountItemsIssued($biblionumber)
$biblio->has_items_waiting_or_intransit
These seem to be from bug 4319 - however, those rules are checked by IsAvailableForItemLevelRequest and are only relevant when we have a patron. These checks essentially assumed 'onshelfholds' policy of 'If any unavailable' For consistency sake I think we should follow the same logic as the results page.
To test:
1 - Find a record with two items, of different types, set a 'Default checkout, hold and return policy' of 'No holds allowed'
2 - Search opac, not logged in, and verify neither the results page or details page shows the place hold button
3 - Delete that rule, make both items withdrawn
4 - Search opac, not logged in, and verify neither the results page or details page shows the place hold button
5 - Mark one item as not withdrawn
6 - Search opac, not logged in, and verify both the results page or details page shows the place hold button
7 - Log in to opac
8 - Search opac, logged in, and verify both the results page or details page shows the place hold button
9 - Place an 'On shelf holds policy' rule for that patron category of 'If any unavailable'
10 - Search opac, logged in, and verify the results and details page shows the place hold button
11 - Set the other item to not withdrawn
12 - Search opac, logged in, and verify the results page shows the place hold button, but details does not
13 - Try various other scenarios - details page should be more correct, results page is always an approximation
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 0d4f520761cead905357892f54fa33a8cb24b827) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 6c1d615394d54b0f275a45c23ee0d6a40d34a236) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Matt Blenkinsop [Thu, 8 Feb 2024 11:11:24 +0000 (11:11 +0000)]
Bug 36036: Fix misnamed location field
This patch fixes a hash reference in the template to allow the location field to display properly
Test plan:
1) In system preferences, click Search and then select the Acquisitions option from the left hand menu
2) Paste the following into MarcFieldsToOrder
price: 975$p
quantity: 975$q
budget_code: 975$h
3) Paste the following into MarcItemFieldsToOrder
homebranch: 949$a
holdingbranch: 949$b
itype: 949$y
nonpublic_note: 949$x
public_note: 949$z
loc: 949$c
ccode: 949$8
notforloan: 949$7
uri: 949$u
copyno: 949$t
price: 949$g
replacementprice: 949$v
itemcallnumber: 949$o
quantity: 949$k
budget_code: 949$l
Now save the sysprefs
4) Navigate to acquisitions and go into a basket
5) Click Add to basket and select “From a new file”
6) Download the file attached to this bug
7) Import the file and when the job is complete click “Add staged files to basket”
8) Click the checkbox next to the record to display the items
9) Inspect the value for the "loc" field - the value of "AV" from the file has not been selected
10) Apply patch and refresh the page
11) On inspection the value should now be properly selected
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c1cd6a980a7c6f862cb678aa81533b1fadc60afb) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit ea15bde9b21c603187f8e90867029ee74bdc4d31) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Owen Leonard [Thu, 8 Feb 2024 13:57:30 +0000 (13:57 +0000)]
Bug 36035: Wrong text colour in addorderiso2709.pl
This patch updates the "Order staged MARC records" page so that the
class which is added upon selection is more unique to avoid a collision
with some default DataTables styles. These classes are used in
JavaScript selectors, not for visual style.
The patch also adds some custom CSS variables to global.scss to override
the defaults for the DataTables "selected" style, in case this issue
crops up again.
To test, apply the patch and rebuild the staff interface CSS. Follow the
test plan from the bug report:
1) In system preferences, click Search and then select the Acquisitions
option from the left hand menu
2) Paste the following into MarcFieldsToOrder
4) Save the sysprefs
5) Navigate to acquisitions and go into a basket
6) Click "Add to basket" and select "From a new file"
7) Download the file attached to this bug
8) Import the file and when the job is complete click "Add staged files
to basket"
9) Click the checkbox next to the record to display the items.
- The expanded form should look correct.
10) Add one or more items to the order and confirm that submitting the
form works correctly.
To test the new default "selected" DataTables style, view a page with a
DataTable, e.g. Administration -> Libraries.
- Right-click on one of the table rows and choose "Inspect"
- Click the table row element, e.g. '<tr class="odd">'
- Double-click the class name and replace it with "selected."
- The row you inspected should now have a pale green background and text
colors should remain the same.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 27a651388dacc6faedef2c7463cfb580f0a79bbe) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit d56f9f201704fb6dff92439b518ec6df345da050) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 22 Mar 2024 13:54:03 +0000 (13:54 +0000)]
Bug 36331: (follow-up) Ignore non_priority holds when checking renewability
When changing the fetch of holds, the check for non-priority was lost - added a loop to pull those out
so the totals and checks are correct
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tidied (tcohen) Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit b7ad3364cbf8778507f7d0dbd2a0199cbe7c0cdd) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 4f4add4c039f30a69bedb75088d9eb5081db29f2) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 15 Mar 2024 13:45:58 +0000 (13:45 +0000)]
Bug 36331: Don't check reserves that an item cannot fill when checking if it can be renewed
Before this patch we get all holds on a record and see if we can fill them with available items.
This means we check to fill holds that the item in questoion may not be able to fill, especially
in the case where no holds are allowed on the item type, this is wrong
To test:
1 - Find or create a biblio with two items of different item types
2 - Make sure one item type allows holds, and the other has:
"Default holds policy by item type"
Set to "No holds allowed"
3 - Set system preference "AllowRenewalIfOtherItemsAvailable" to "Don't allow"
4 - Check out the unholdable item to a patron
5 - Set a hold for a different patron on the next available item
6 - Confirm the checked out item can be renewed (don't renew, just view the checkouts page)
7 - Checkout the other item to a third patron
8 - Confirm the first item can still be renewed
9 - Set system preference "AllowRenewalIfOtherItemsAvailable" to "Allow"
10 - Confirm the item cannot be renewed now
11 - Apply patch, restart all
12 - Confirm the item can be renewed
13 - Set the item type to a type that allows holds
14 - Confirm the item can no longer be renewed
15 - Restore the item type
16 - Set system preference "AllowRenewalIfOtherItemsAvailable" to "Don't allow"
17 - Confirm the item can be renewed
18 - Check in the item from the third patron
19 - Confirm the item can still be renewed
20 - prove -v t/db_dependent/Circulation.t - test still pass
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 9cc622be1fb267efe5202f24450f9c5acee77fd2) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit ee235cd8d4398ef7239db41737845eabca7363db) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 36329: (follow-up) Fix error message comparisson in testes
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5f7a9db93672c14efdba861373c2d330b8aee6c4) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit f805c221cf9fe138735f25568704d16cae2a97c7) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 36329: Make POST /transfer_limits/batch honor BranchTransferLimitsType
This patch adds tests for the different cases of `BranchTransferLimitsType`.
It also adds tests for the situation of the consumer sending both limit
criterias on the request.
The controller gets adjusted for this new behavior and the spec gets
documentation added about this.
Bonus: tests are added the right guidelines code, and
BranchTransferLimitsType gets mocked to avoid failures due to existing
data.
To test:
1. Apply this patches
2. Run:
$ ktd --shell
k$ qa
=> SUCCESS: All green, and tests pass!
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fixed a typo in one of the return messages
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 9760f066dd3488fe166015959aa8b526bb98daa6) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit bdeabccf3d1e9dd2edd05c4a5f82cb801382e4a6) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 506087bc1541c94b46a4f8b405b8b1c131d526b9) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit d45ed60db448789a7e165049ec2c1367b4967a00) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Tue, 19 Mar 2024 08:16:52 +0000 (09:16 +0100)]
Bug 36356: Fix rollback from FrameworkPlugin.t
rollback ineffective with AutoCommit enabled at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1651.
I have not investigated more than that. Reaching this was already the
end of a long road... (see comment 0)
Test plan:
0. Do not apply this patch
1. select count(*) from branches
Note the value
2. Run
prove t/db_dependent/FrameworkPlugin.t
=> There is a warning
3. Repeat 1.
=> There are too many libraries!
4. Apply the patch, retry 1, 2, 3
=> No warning, no library added by the tests
Julian Maurice [Thu, 25 Jan 2024 15:49:32 +0000 (16:49 +0100)]
Bug 35921: Improve perfs of acqui-home.pl when there are many budgets
When there are a lot of budgets with the same owner, most of the time of
acqui-home.pl is spent loading the same patron over and over.
This patch makes sure each borrower is loaded only once.
Test plan:
0. Do not apply the patch yet
1. Create a thousand budgets with the following command (make sure the
budget_owner_id is an existing borrowernumber):
perl -MKoha::Database -e '
my $schema = Koha::Database->schema;
my $period = $schema->resultset("Aqbudgetperiod")->create({
budget_period_startdate => "2000-01-01",
budget_period_enddate => "2999-12-31"
});
$schema->resultset("Aqbudget")->create({
budget_owner_id => 1,
budget_period_id => $period->id
}) for (1..1000)
'
2. Measure the time it takes to load acqui/acqui-home.pl (do it several
times and keep the average time)
3. Apply the patch
4. Repeat step 2
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 24b33936a526187e17719294e236f186aec46d50) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit b37e510eb8c2b280a69dfb60c427c60d1d53b041) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Fri, 8 Mar 2024 15:06:11 +0000 (16:06 +0100)]
Bug 36149: Unset userenv from middleware
The userenv (logged in user's info) are stored in
$C4::Context->context->{activeuser}, which persists in plack worker's
memory.
It's really bad in theory as we are not cleaning it before or after the
HTTP request, but only when set_userenv is called (what we are doing
commonly in C4::Auth::get_template_and_user).
If C4::Context->userenv is called before set_userenv we should get undef,
not the userenv from the previous request!
In practice this should not be a problem, but well... who really knows?
This patch suggests to have a middleware to deal with removing the
userenv at the beginning of each request (maybe it should be after, right? - FIXME).
To test:
1 - Edit /etc/koha/sites/kohadev/koha-conf.xml to set <plack_workers>1</plack_workers>
2 - Edit about.pl and add a line after: CGI->new:
warn Data::Dumper::Dumper( C4::Cointext->userenv() );
3 - tail -f /var/log/koha/kohadev/*.log
4 - View about.pl in staff interface, should get a "somethign's wrong" warning
5 - Reload, you get current user info
6 - Open an incognito tab, sign in as a different user and click some stuff
7 - Reload about.pl in other window
8 - You get the opac user info
9 - Apply patch
10 - Edit /etc/koha/sites/kohadev/plack.psgi and add the middleware after "RealIP":
enable "+Koha::Middleware::UserEnv";
11 - Restart all
12 - Reload about.pl - you get a "Something's wrong" warning
13 - Click things in opac on incognito window
14 - Reload about.pl - only "Something's wrong" - you no longer see any user info
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(cherry picked from commit 576e7e09fdca703f76c0d10ae55eebf12ee1fdf4) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 3dd1cdd74ff004d1d218366a377fc91d8ae4e21d) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 20 Mar 2024 07:35:29 +0000 (08:35 +0100)]
Bug 19613: Use the 'note' profile
WNC amended patch: tidied
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 3cb586b72165bcbd029948f46407359be9d5e9a8) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 55931114b62557dfbbe01e7bcf0cd150b5733262) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 83db8696ca7a83aba224a0ab645f03447a96887b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 383984a0164adabc79e91ad11e2e930f5e070ed9) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 20 Mar 2024 07:34:09 +0000 (08:34 +0100)]
Bug 36328: Add a separate 'note' profile
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 7a626d8d870039330889d6e48c3ae5ba848d85e9) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit fb1c48da9a06ff30f8aa5bafb1bf1d95cfd58ea2) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Fri, 15 Mar 2024 10:40:57 +0000 (11:40 +0100)]
Bug 36328: Add test
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit b315c0f2630ccd738fc811e13d1e95b11d3c8df1) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 11ea420b54ee8ec791b3f6d688a7366acccb42fa) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Fri, 15 Mar 2024 10:39:33 +0000 (11:39 +0100)]
Bug 36328: Add p span div to Scrubber
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit ca64e4f6f30b172d86184c61134f5f29713863d2) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit de4053a0f30431a5560baf28e21547873b71bf55) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Owen Leonard [Tue, 9 Apr 2024 15:55:57 +0000 (15:55 +0000)]
Bug 36511: Some scripts missing a dependency following Bug 24879
These files needed the addition of 'use C4::Auth qw( check_cookie_auth
);'.
To test, apply the patch and restart services.
- If necessary, enable the LocalCoverImages system preference.
- Open the browser console and then the "Network" tab. You can click
"Images" to filter for the correct kind of request.
- Perform a catalog search. After the search has loaded, check that
there are no 500 errors in the Network tab.
- Go to Cataloging -> Label creator.
- If necessary, create a label batch and add some items.
- Export your batch and test both the "Download as CSV" and "Download as
XML" links. Both should trigger the correct download.
- Go to Serials -> Claims, and select a vendor with late issues.
- Select all late issues and click "Download selected claims" at the
bottom of the page.
- Your CSV file should download correctly.
The file acqui/check_uniqueness.pl has been corrected as well but I'm
not sure how to test it!
Signed-off-by: danyonsewell <danyonsewell@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 747f5132311ea51ea6babbfc92a775ac0c67f93a) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 01b22fb71d30f56d3102837b5c9b4cfdacbc9e76) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Mon, 18 Mar 2024 15:32:57 +0000 (16:32 +0100)]
Bug 36323: Move koha_perl_deps.pl to misc/devel
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Thu, 14 Mar 2024 15:17:55 +0000 (16:17 +0100)]
Bug 24879: Adjust tests
Installer scripts cannot be run from the UI:
debian/templates/apache-shared-intranet.conf:RewriteRule ^/cgi-bin/koha/(C4|debian|etc|installer/data|install_misc|Koha|misc|selenium|t|test|tmp|xt)/|\.PL$ /notfound [PT]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Fri, 15 Mar 2024 09:12:41 +0000 (10:12 +0100)]
Bug 31988: Remove reports/itemtypes.plugin
This "plugin system" is only used for the itemtypes report. We can
simply remove the reports/manager.pl script and this plugin in favor of
a dedicated report.
Test plan:
Same behaviour expected before and after this patch
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Andreas Jonsson [Thu, 7 Mar 2024 09:12:25 +0000 (09:12 +0000)]
Bug 36244: Do template toolkit processing first
To avoid injection of template toolkit code
from database fields that are controlled by
untrusted sources.
Test plan:
* review subtest 'Template toolkit syntax in
parameters' in t/db_dependent/Letters.t
* Run the unit test:
prove t/db_dependent/Letters.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Andreas Jonsson [Thu, 7 Mar 2024 09:07:49 +0000 (09:07 +0000)]
Bug 36244: Unit test for tt syntax in parameters
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Julian Maurice [Thu, 1 Feb 2024 08:15:23 +0000 (09:15 +0100)]
Bug 35960: Use .val() instead of string concat to prevent potential XSS
Test plan:
1. Log out
2. Go to /cgi-bin/koha/mainpage.pl#somestring"with<html>char
3. Open the brower's inspector and find "auth_forwarded_hash" input
4. Make sure the value attribute is there and corresponds to the URL's
fragment. It should be URI-encoded.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Tue, 23 Jan 2024 17:53:39 +0000 (17:53 +0000)]
Bug 35800: Remove item.can.be.edited check
To test:
APPLY PATCH
1. Check out an item to a patron from library A
2. Give permissions to a patron from library B
(example of a circulation staff account)
- circulate
- catalogue
- borrowers ( including view_borrower_infos_from_any_libraries )
- reserveforothers
- updatecharges
- suggestions
- lists
- clubs -> enroll
3. If necessary, change the username and password of that staff member in order to be able to log in
4. In a private browser window, log in as the staff member
5. View the record with the checked out item
6. You should see the name/cardnumber of the patron the item is checked out ot.
7. Turn off the view_borrower_infos_from_any_libraries for this patron.
8. Now on the record detail page you should see text like `Checked out to A patron from library Midway : due 01/28/2024`.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e8c0438d87468d7a5638a3463817aff5c9d75e85) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 4c38b7140aa7b33d170ee84be17c890b811b6ca1) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 6 Sep 2023 15:48:12 +0000 (15:48 +0000)]
Bug 29522: [alternate] Skip relinking bibliographic records when merging authorities
If autolinking is enabled, there are scenarios where the authorities merge process
updates the record, then sends it to ModBiblio which then AutoLinks the record, undoing
the changes in the record (as the 'from' authority is not removed until the process is complete)
This patch simply disables the autolinking process when merging authorities
To test:
Set system preferences
AutoCreateAuthorities = don't generate
RequireChoosingExistingAuthority = don't require
AutoLinkBiblios = Do
CatalogModuleRelink = Do
LinkerKeepStale = Don't
LinkerModule = first match
LinkerRelink = Do
1. Create an authority record
1.1. Go to Authorities
1.2. Click on "New authority" and choose an authority type (I chose Corporate name)*
1.3. Fill in the mandatory fields (000, 003, 005, 008, 040)
1.4. In tab 1, click on the label of the main heading (110 for Corporate name)
1.5. Fill in subfield
1.6. Copy content of subfield
1.7. Click on "Save"
1.8. Note the authority record number
2. Duplicate the authority record
2.1. Click on "Edit" and choose "Edit as new (duplicate)"
2.2. Click on "Save"
2.3. Click on "No: Save as new authority"
2.4. Note the authority record number (should be the number from step 1.8 +1)
3. Link one of the authority records to a bibliographic record
3.1 In another tab, do a catalog search
3.2. Click on "Edit record" under one of the search results
3.3. Go to the relevant tab (for corporate name, I used field 710 in tab 7)
3.3.a. If there are no empty fields for that tag, click the "Repeat this tag" button (two rectangles)
3.4. Paste the text previously copied in subfield
3.5. Click on "Link authorities automatically" at the top of the page
3.6. Note the authority record number in subfield
--> The linked authority record should be the first authority record (step 1.8)
3.7. Click on "Save"
4. Merge the two authority records, keep the one that is not linked to the bibliographic record
4.1. Go back to the tab with the authorities
4.1. Go to Authorities
4.2. Search for the aurhorities previous created
4.2. Click on "Actions" and choose "Merge" for both records
4.3. Select the record number that is NOT linked to the bibliographic record
4.4. Click on "Next"
4.5. Click on "Merge"
5. Check the bibliographic record
5.1. Go back to the tab with the bibliographic record and refresh the page (Ctrl+F5)
5.2. Hover the mouse cursor over the name or term, without clicking
5.3. Note the record number that appears at the bottom of the screen
--> The record number was not changed
6. Apply the patch
6.1. Run prove t/AuthoritiesMarc_MARC21.t
6.2. Repeat Previous steps 1, 2, 3, 4, 5
--> The record number is change
Signed-off-by: Barbara Petritsch <barbara.petritsch@wienmuseum.at> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 1b9371beb33dae4b661768609dca9930a91bfb56) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 10661f70ff3462ffac73afa6a6aa44d1d0a8f123) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
As mentioned on bug 36329, this endpoint is only used with one of this
parameters:
* item_type
* collection_code
The other will be NULL both on the DB and the (deserialized) request
body. For the data from the DB, the author added `|| q{}` but missed to
do so on the incoming parameters when generates the hash key.
This generates the following warnings when using from the UI:
[2024/03/15 11:42:51] [WARN] Use of uninitialized value in sprintf at /kohadevbox/koha/Koha/REST/V1/TransferLimits.pm line 146.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 03b0f31b9e63ce314c333ac6ffd68587a609e587) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit fa2e164f240a9e040c0e044c39dac6c613cb7b27) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Thu, 14 Mar 2024 13:39:56 +0000 (14:39 +0100)]
Bug 36277: Improve algorithmic complexity of batch_add
The 2 nested loops are terrible in term of algorithmic complexity.
Especially if we are fetching from there.
The goal of this patch is to fetch all the limits outside of the loop.
If you have 100 libraries, it will remove 100^2 - 1 fetches!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 202628342ab9397e8b15aa5e62c0aaa041d3c8a0) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 372adf555d579c290355ff33f891cd205dc0bfac) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Thu, 14 Mar 2024 13:06:28 +0000 (14:06 +0100)]
Bug 36277: Do not fetch the whole library list
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 14388b6478858e298a9f0de104d5e839bc8cb430) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 4c56374272bb458ee0497f9efd42c3db54723fcf) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Emily Lamancusa [Mon, 29 Jan 2024 20:25:19 +0000 (15:25 -0500)]
Bug 35934: Correct missed case of switching items.transfer to transfer in detail.tt
To test:
1. Put an item with no holds/recalls in transit (manually or by checking
it in at a branch other than its homebranch to trigger a ReturnToHome)
2. Go to the item's bib record
--> Note that the item's status will display as something like,
"In transit from X to Y since 01/29/2024 Available"
3. Apply patch and refresh the page
--> Note that item now shows only the transit status, but not "Available"
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 687963b016bb9e3f74abebc64c830e53ab4d1e50) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit f726c7ebfe0102ffaad49ffd73297971cb1a5248) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Tue, 5 Mar 2024 16:00:39 +0000 (16:00 +0000)]
Bug 36224: Remove unused spsuggest from templates
To test:
-APPLY PATCH
-Review the OPAC results and staff interface results pages.
-Nothing should change, it would be impossible to end up inside of the [% IF koha_spsuggest %] condition because there is nothing like that in the scripts!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e07c6d072977b9e52dc2153fd36f03601e161c1a) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 3e0bab0bb927d20b60679ebf1606859d78495d04) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Laura Escamilla [Mon, 11 Mar 2024 14:43:26 +0000 (14:43 +0000)]
Bug 36292: Fixed 'See all charges' hyperlink for guarantees/guarantor linked charges
To test:
1. Add a guarantee / guarantor relationship for two patrons.
2. Add a manual fee to the guarantees' account.
3. Go to the guarantor's account and view the 'Details' tab. Under contact information there should be a Guarantees section. There you will see the charges for your guarantee. Click on ‘See all charges’. The link leads you no where.
4. Apply the patch and restart_all
5. Refresh the guarantor’s page and click on ‘See all charges’ again. This time it will take you down to the ‘Guarantees’ Charges’ panel.
6. Sign off and have a great day! :D
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e2d54b1279b65507596ca3a08d6b44d1b15fe2b8) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit c8d97a97a10983f44b697bbb4c03e4707999388d) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Tue, 12 Mar 2024 10:18:18 +0000 (11:18 +0100)]
Bug 36298: In patrons search fix road type with authorized value
In new patrons search via API, the road type code is displayed in patron address instead of authorized value description.
Also road type is missing a space separator in DE and FR format.
Test plan :
1) Create two entries in authorized value category "ROADTYPE" :
R1 "Road"
R2 "Street"
2) Edit a patron (ie Delgado, Floyd) to set road type to "Road"
3) Perform a search on patrons (click on letter D)
4) Check you see in address "Road" and not "R1"
5) Edit authorized value category "ROADTYPE" to delete entry "R1"
6) Perform a search on patrons (click on letter D)
7) Check you see in address "R1"
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3c0ac4cb9a4290c770aa8e4837b6d639b49c97e9) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 72e78f72a3e701b574db13f7ad0ff161e00029ef) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Fri, 8 Mar 2024 21:32:21 +0000 (21:32 +0000)]
Bug 35796: Properly set patron_expiration value
To test:
1) Set an expiration on the password in a patron account and save.
2) Go to patron details (moremember.pl) and confirm the password has an expiration.
3) Edit the patron account without touching anything and save the account.
4) Go back to patron details (moremember.pl) and note that the expiration on the password has been removed.
5) APPLY PATCH
6) Try 1 - 4 again except this time password expiration is not removed.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 60dcb2b0775ba4d47502e68af5d4aa3c127f0f81) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit e5cdf2bbc17e30d563187a4948518fdb2056191e) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Tue, 5 Mar 2024 14:52:16 +0000 (14:52 +0000)]
Bug 36233: Use select2 to load vendors on invoice search
This patch moves the dropdown to use select2 and avoids loading all
vendors at page load.
To test:
1 - Create some extra vendors in your system, ideally over 20
2 - Search for a vendor in acquisitions
3 - Click 'Invoices'
4 - Note the dropdown of all vendors 'Vendor:' in search bar on left
5 - The vendor you came from shoudl eb selected
6 - Apply patch
7 - Repeat
8 - Note only a partial list of vendors is loaded, confirm current vendor still selected
9 - Search in the dropdown and confirm vendors are returned
10 - Select a vendor and search
11 - confirm selection is retained
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com> Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 6b1b3718889f3674ac00eccbe3e0636a66f2c1a5) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit bb5fd20c6804fbb3e479dca113971d507e021ca3) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle M Hall [Fri, 8 Mar 2024 11:07:52 +0000 (06:07 -0500)]
Bug 33898: Implement reaping for database polling
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e29e058851c1ffec5bcadab8bba357cd53142a2b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit da258a31950d53831292fdbcc54948ba3237c18c) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Fri, 8 Mar 2024 07:37:19 +0000 (07:37 +0000)]
Bug 33898: Alternative approach with receive frame timeout
See bug 33898 comment6.
Test plan:
Based on comment12: Stage MARC import and manage. Look at the same
time to the results of ps aux|grep Z. Verify that the lines with
[background_jobs] <defunct> disappear within 10 seconds.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit bc42006019acf17e0c9b7284070e2f776dc77335) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 7aa97b161ce585cd41972e4fb253c31030a9689c) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Mon, 11 Mar 2024 15:41:12 +0000 (16:41 +0100)]
Bug 32671: Prevent selenium/basic_workflow.t to fail if run on slow servers
When submitting the form to create a new patron we are doing a POST
memberentry.pl that is redirecting to moremember.pl
The selenium test is expecting for the end of the request to test the
page's title against "Patron details for ".
But it's only waiting for the POST response (302), not the GET
moremember that will display the patron's details.
You can simulate a slow server using cpulimit: `cpulimit -b -p $PID -l 1`
replacing $PID with the pid of the starman process.
Note that other tests are failing using 1%, but... baby steps.
The current failre:
# Failed test at t/db_dependent/selenium/basic_workflow.t line 122
Wide character in print at /usr/share/perl/5.32/Test2/Formatter/TAP.pm line 125
# 'Add patron (test cat description) › Patrons › Koha'
# doesn't match '(?^u:Patron details for test_patron_surname)'
The next one (NOT fixed by this patch):
# Failed test at t/db_dependent/selenium/basic_workflow.t line 256.
# '
#
# Checkouts (0)# # '# doesn't match '(?^u:Checkouts \(1\))'
t/db_dependent/selenium/basic_workflow.t .. 14/22 # Failed test at t/db_dependent/selenium/basic_workflow.t line 256.
# '
#
# Checkouts (1)
#
# '
# doesn't match '(?^u:Checkouts \(2\))'
t/db_dependent/selenium/basic_workflow.t .. 16/22 # Failed test at t/db_dependent/selenium/basic_workflow.t line 256.
# '
#
# Checkouts (2)
#
# '
# doesn't match '(?^u:Checkouts \(3\))'
David Cook [Mon, 4 Mar 2024 04:19:38 +0000 (04:19 +0000)]
Bug 34755: Backport Koha::Token change from bug 34478
This change includes the Koha::Token changes which uses
Koha::Session for generating and checking CSRF tokens.
0. Apply the patch and koha-plack --restart kohadev
1. Setup Keycloak OIDC SSO according to "Testing SSO"
wiki guide
2. In a regular window go to http://localhost:8080
3. In a private window go to http://localhost:8080 and click
the SSO "Log in with..." button, but don't log into Keycloak
4. In the regular window, login locally, and navigate to 5-6 pages
5. In the private window, log into Keycloak
6. Note that you are redirected back to Koha and logged in
successfully (no wrong_csrf_token error).
Signed-off-by: Olivier Hubert <olivier.hubert@inlibro.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 46c0419a11d56b078f1f8528e51bf1a78bd284e6) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
David Cook [Tue, 27 Feb 2024 06:05:24 +0000 (06:05 +0000)]
Bug 35955: Cache CSRF token in template plugin
This change uses the Koha::Cache::Memory::Lite cache to
cache the CSRF token, so that it is only generated once,
and is re-used by the Koha::Template::Plugin::Koha object
throughout the entire template processing for the HTTP request.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
(cherry picked from commit 108c955eac02707ccaa35081fbece1054a5dcda3) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 222777ba98962b2fcd3433af78bd13bfd90c0620) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Mon, 12 Feb 2024 09:54:04 +0000 (09:54 +0000)]
Bug 36066: Only allow cancelled order deletion in API
Note: I had trouble with listing orders in API without
status, although formally not required according specs.
Test plan:
Run t/db_dependent/api/v1/acquisitions_orders.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit dcbda39c0a77a35b2bc4684a286bf26254046877) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 1c556d6ed1ab6d0512ec3317ca5963205fca716b) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Mon, 12 Feb 2024 09:54:04 +0000 (09:54 +0000)]
Bug 36066: Add tests
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] As Victor discovered, the test with status new in subtest
'delete' needed the authorised user now.
Test plan:
Run t/db_dependent/api/v1/acquisitions_orders.t
Without the follow-up patch this should FAIL.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8bb61c4f8835a7b36d32c580e12fe40381a5f22b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 1bc64dcef4fe3b411c7fda3f6acd33cc72e97b3c) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Fri, 2 Feb 2024 00:04:33 +0000 (00:04 +0000)]
Bug 35983: Remove extra selected=selected from dropdown menu
To test:
1. Admin > Circ & fine rules
2. Select a library at the top of the forms ( #selectlibrary )
3. Try to change the 'Refund lost item replacement fee' to "Refund lost item charge (only if unpaid)".
4. Press save and let the page reload.
5. Look at the dropdown again, the value is now set to "Refund lost item charge and restore overdue fine".
6. APPLY PATCH
7. Try steps 2 - 5 again but this time the value in the dropdown should not change.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit af5453bbd28089acfb99d5877eac939b7a87f2ff) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit fdc2bbb76f753384c51cca03e2ff16ba6c18e716) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Shi Yao Wang [Fri, 23 Feb 2024 19:16:27 +0000 (14:16 -0500)]
Bug 35916: Purchase suggestions bibliographic filter should be a "contains" search
Make all bibliographic information fields filter do a contain match
rather than an exact match
Test plan:
1. Create a purchase suggestion with a multi-word title (e.g. one day in december)
1.1. Go to Acquisitions > Suggestions > New purchase suggestion
1.2. Enter a title (e.g. one day in december)
1.3. Click on Submit your suggestion
2. Search for one of the words in the title
2.1. In the "Filter by" section, click on Bibliographic information
2.2. In the title field, enter one of the words of the title (e.g. december)
2.3. Click Go
--> No results
3. Apply the patch
4. Redo step 2 and notice there is now a valid result
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3d7ea3bd99a0b6c68d7bcd763559d43910c4c9e7) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 8644a1165f19a18e2e2010f51a7f32597e08a6ee) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle M Hall [Tue, 27 Feb 2024 13:40:53 +0000 (08:40 -0500)]
Bug 36103: Remove the "Cancel hold" link for item level holds
This link is broken and doesn't make sense from a UI/UX perspective
and thus should be removed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c91a43ca1f1cbc9b4174ac435428086fc3ed03db) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit de4f54b3fa6ca3dd30dc23e10f1f42630028216e) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Shi Yao Wang [Fri, 23 Feb 2024 20:01:43 +0000 (15:01 -0500)]
Bug 35911: Make archived suggestions not show in patron's account
Remove archived suggestions in patron's account page
Test plan:
1. Go to a patron's account in the staff interface
2. Go to the Suggestions tab
3. Click New purchase suggestion and create a suggestion
4. In another browser tab, go to Acquisitions > Suggestions
5. Click the small arrow next to the edit button to the right of the suggestion, and choose Archive (alternatively, check the suggestion's box and click Archive selected)
--> Suggestion disappears from the suggestions management page (OK)
6. Go back to the tab with the patron's account and refresh
--> Suggestion is still visible
7. Apply the patch
8. Redo step 6 and notice the suggestion is not visible anymore
9. Redo step 4 and 5 but this time, unarchiving the suggestion
10. Redo step 6 and notice the suggestion is back
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit ac71adbd23e2d3a6c599ac963b042576dca635f3) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit d35481b1abb0f9fe30acefd14070f74d1265c50b) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Laura Escamilla [Tue, 6 Feb 2024 16:13:32 +0000 (16:13 +0000)]
Bug 36004: Fixed typo in successfully
To test:
1. Turn on the syspref 'OpacCatalogConcerns'
2. Go to view a record in the OPAC and click on "Report a concern" in
the column located on the right-hand side.
3. Fill out the title on the form and leave everything else the same.
Click on submit and notice that the message on the screen says "Your
concern was sucessfully submitted."
4. Apply the patch.
5. Submit a new concern. Notice that the text now has "successfully"
spelled correctly.
6. Sign off and have a great day! :D
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 6bf839d89244e316d7ec936c439fa0d770f3665e) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 17ba879fec1794cd7633c21f1211c089ab9f0367) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Laura Escamilla [Tue, 6 Feb 2024 16:28:41 +0000 (16:28 +0000)]
Bug 36005: Fixed typo in "Your concern was successfully submitted." text
To test:
1. Turn on the syspref 'CatalogConcerns'
2. Go to view a record in the staff intranet and click on "New catalog concern" which is located in the "+New" dropdown.
3. Fill out the title on the form and leave everything else the same. Click on submit and notice that the message on the screen says "Your concern was sucessfully submitted."
4. Apply the patch.
5. Refresh the page and submit a new concern. Notice that the message now has "successfully" spelled correctly.
6. Sign off and have a wonderful day! :D
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 0fcf48c55f858d19f1b78337b4b83f61831564fb) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 72dd84251ee96fcf66518ceac3203bafbaa3c4df) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Raphael Straub [Thu, 8 Feb 2024 09:00:13 +0000 (09:00 +0000)]
Bug 36032: Use a single angle in the "Next" button
The "Next" pagination button in the OPAC result list has a double angle
whereas the "Previous" button only has a single angle. This patch fixes
that error.
To test:
1) Do a search in the OPAC with more than one page of results.
2) Observe that the "Next" button has a double angle whereas the
"Previous" button has only a single angle.
3) Apply the patch.
4) Repeat steps 1 and 2.
5) Verify that the "Next" button now has a single angle.
Sponsored-by: Karlsruhe Institute of Technology (KIT) Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 7c1ce64593718143c94c3b666f4f468e55a7fe92) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 0e511dffcf09c43c4cffcb6a1a61fed772502ec5) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Owen Leonard [Mon, 18 Dec 2023 19:05:10 +0000 (19:05 +0000)]
Bug 35538: Sort OPAC self registration library list by library name
This patch modifies opac-memberentry.pl so that the list of libraries is
sorted by library name instead of library code.
To test, apply the patch and restart services.
- If using the default testing data you'll have to go to Administration
-> Libraries and edit one or more libraries so that the library name
is alphabetically different than the library code. e.g. Centerville ->
Zanzibar.
- Go the OPAC and click "Create an account" (requires the
PatronSelfRegistration system preference).
- Under "Home library," the dropdown of libraries should be ordered by
library name.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5998fe93f5a7fe5fa2b55fc18b94e68e99f2a879) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit e37c7d27e1d9af49023cc763509235d78e37ecb0) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Working on bug 31791, I found myself wondering if our current recursive
code in C4::Auth::haspermission() would allow checking AND on
subpermissions.
As it is not documented in the POD or tested, I decided to write some
unit tests for it.
It turned out it was well supported, so I decided to submit the tests,
and a small tweak in the POD to reflect that.
To test:
1. Apply this patch
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Auth/haspermission.t
=> SUCCESS: Tests pass! The code supports AND on subpermissions!
3. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit aa1049fdd37d87b73c434dfdea11ba691e7095da) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 26ba5fba8be7eee3d931c2d6ef774860145780f0) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lari Taskula [Tue, 20 Feb 2024 01:47:53 +0000 (01:47 +0000)]
Bug 36134: Read complete Elasticsearch configuration in about.pl
When enabling Elasticsearch authentication in Koha using userinfo
parameter of Search::Elasticsearch, about.pl breaks and gives an
internal server error.
This patch reads the complete Elasticsearch configuration for
about.pl including userinfo causing about.pl to recover.
To test:
1. In Elasticsearch 7 settings, set "xpack.security.enabled: true"
2. Add <userinfo>elastic:password</userinfo> to KOHA_CONF elasticsearch
settings
3. Restart plack and navigate to about.pl
4. Observe internal server error
5. Apply patch
6. Refresh about.pl
7. Observe it working again
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5511482951f812140f134b0ddfc5f3cab2807c77) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit e70bc2d20feabd3c52ae9017f66818d36e573cdc) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Thu, 8 Feb 2024 11:23:30 +0000 (12:23 +0100)]
Bug 36010: Fix Items/AutomaticItemModificationByAge.t failing since Bug 32029
UT is failing in jenkins.
Change to use biblio.copyrightdate instead of bilio.medium
Run prove t/db_dependent/Items/AutomaticItemModificationByAge.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 2e6a2c3b5b6d0464215189e29954d06e5f6e236b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit b0660d11f52bb310a2b39da0a42dda60da87a2ad) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Fri, 28 Oct 2022 07:59:26 +0000 (21:59 -1000)]
Bug 32029: Automatic item modifications by age add biblio table
In automatic item modifications by age missing,
conditions can be on columns of tables items or biblioitems.
Table biblio is missing.
Test plan :
1) Create an automatic item modifications by age with a condition on a column of biblio table
2) Create a record and item matching the rule
3) Run misc/cronjobs/automatic_item_modification_by_age.pl -c -v
=> Check only matching items are impacted
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Bug 32029: (follow-up) unit test
Signed-off-by: matthias le gac <matthias.le-gac@inlibro.com>
Bug 32029: (follow-up) tidy
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4e480d48f67c2eb942be4c8516533a327c7e2ba5) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit badba61f0091a2c4f04173976d6df154e4542b84) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Fri, 12 Jan 2024 17:35:24 +0000 (17:35 +0000)]
Bug 34234: Respect display_order in additem.tt and detail.tt
1. APPLY PATCH
2. EnableItemGroups
3. Find a record and add some new item groups with display orders that are different from the order in which the groups were added
4. Check the checkbox next to one or more items and click the link to "Add/move to item group"
5. Ensure display order is correct
6. Now add a new item to the record and scroll down to the dropdown underneath "+ Add to item group"
7. Display order should be correct.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit bcfc786f17fad8b7c866ee6063d2953d7b5d925d) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
(cherry picked from commit 9308e3d5190a496e1c1bd603de3a8b2a8392d1df) Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
projects / koha.git / log