Owen Leonard [Tue, 19 Dec 2023 19:07:41 +0000 (19:07 +0000)]
Bug 34900: (follow-up) Add version information to more entries
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Nind [Sun, 3 Dec 2023 19:18:42 +0000 (19:18 +0000)]
Bug 34900: (follow-up) List alphabetically and tidy ups
Listed in alphabetical order (except for Koha, which is listed
at the start).
Tidy ups and consistency changes:
- end of each entry: remove full stops
- separator between software and license: use a colon
- headings for software/library name: use sentence case
unless a noun, abbreviation, or the actual software name
- http and https: use https where site uses it
- URLs: update where required
- license names: use consistent full names with title case
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Fri, 1 Dec 2023 13:05:58 +0000 (13:05 +0000)]
Bug 34900: (follow-up) Correct last entry
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Thu, 26 Oct 2023 10:35:12 +0000 (10:35 +0000)]
Bug 34900: Simplify text of about page license information
This patch simplifies the language describing third-party libraries and
their licenses so that translation are not so complicated.
The patch also removes information about some assets which are no longer
part of Koha.
The license information now lists only the library name, version (if
possible) and license.
To test, apply the patch and go to the about page in the staff
interface. Open the "Licenses" tab and check the content.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Tue, 5 Dec 2023 13:19:37 +0000 (14:19 +0100)]
Bug 35477: Show a warning when non-existent items are added to the waiting list
Only messages "X new items added" or "No items added" were displayed.
With this patch we will display:
A warning with "No items added"
A warning with "X new items added. Y items not found." when some items
have not been added
A messages "X new items added" when everything went well
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
2. Run misc/devel/install_plugins.pl
3. Restart memcached and koha
4. Go to Administration -> Manage Plugins
5. Run the KitchenSink plugin's tool
6. Click on "Schedule greeting"
7. Go to Administration -> Manage jobs
8. If you don't see any jobs, uncheck "Current jobs only"
9. You should see a job of type "Unknown job type
'plugin_kitchensink_greeter". Click on the "View" button
10. Under the Report section you should see "This is the report block"
11. Under the Detailed messages section you should see "This is the
detail block"
12. Open the browser console, you should see a message "This is the js
block"
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Michał Kula [Wed, 20 Dec 2023 15:00:00 +0000 (16:00 +0100)]
Bug 35618: Remove deprecated parameter "type" from showelastic.pl page
This is a follow-up to Bug 33353. Types are gone in ES8 and deprecated
in ES7. Support for ES6 is already dropped in Koha master.
The parameter has to be removed, otherwise an exception is thrown with
ES8 (which is listed as officially supported by Koha now).
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Cook [Mon, 18 Dec 2023 00:35:53 +0000 (00:35 +0000)]
Bug 35588: Scope authorised value desc lookup according to field/subfield
This patch ensures that the authorised value descriptions looked up
are for the correct field/subfield designated in the CSV profile.
Test plan:
0. Do not apply the patch yet!
1. Go to http://localhost:8081/cgi-bin/koha/tools/csv-profiles.pl
2. Add a CSV profile with the default values and using the following
for the "Profile MARC fields":
000|001|003|005|006|007|008|010|015|016|020|022|040|050|082|100|110|
111|130|240|243|245|246|247|250|260|300|336|337|338|440|490|500|501|
505|520|530|600|610|611|630|648|650|651|690|700|710|711|856|887|942|995
3. Create a new List
4. Add all the database's bibs to that list using SQL like the following (where the shelfnumber equals the number for your list):
insert into virtualshelfcontents (shelfnumber,biblionumber,borrowernumber) select 1,biblionumber,51 from biblio;
5. Go to that list in the staff interface
6. Download that list using your CSV profile
7. Apply the patch
8. koha-plack --reload kohadev
9. Download that list using your CSV profile
10. Note that the output is a little slower, but still quick enough.
11. Note that the output is a bit different. For records like "Gairm",
the output will end in "1" instead of "Yes". This is correct, because
this subfield isn't an authorised value!!!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Cook [Mon, 18 Dec 2023 00:11:32 +0000 (00:11 +0000)]
Bug 35579: Add unit test
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Cook [Fri, 15 Dec 2023 06:02:17 +0000 (06:02 +0000)]
Bug 35579: Cache authorised value lookup by MARC field
This patch adds a "get_descriptions_by_marc_field" method
which caches AuthorisedValue descriptions when searched by
MARC field, which is used when exporting MARC to CSV.
Test plan:
0. Do not apply the patch yet!
1. Go to http://localhost:8081/cgi-bin/koha/tools/csv-profiles.pl
2. Add a CSV profile with the default values and using the following for the "Profile MARC fields":
000|001|003|005|006|007|008|010|015|016|020|022|040|050|082|100|110|111|130|240|243|245|246|247|250|260|300|336|337|338|440|490|500|501|505|520|530|600|610|611|630|648|650|651|690|700|710|711|856|887|942|995|952|952$c
3. Create a new List
4. Add all the database's bibs to that list using SQL like the following (where the shelfnumber equals the number for your list):
insert into virtualshelfcontents (shelfnumber,biblionumber,borrowernumber) select 1,biblionumber,51 from biblio;
5. Go to that list in the staff interface
6. Download that list using your CSV profile
7. Apply the patch
8. koha-plack --reload kohadev
9. Download that list using your CSV profile
10. Note that the output is the same, but that the output completes much more quickly after applying the patch
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kevin Carnes [Thu, 13 Apr 2023 13:20:02 +0000 (15:20 +0200)]
Bug 31694: (follow-up) Use values for operations to avoid translation issues
To test:
* Try adding a preset rule that has an operation with different translations
for the column and the pull down (e.g. Outrepasser for fr-CA)
* Without the patch it appears as Custom (e.g. Personnalisé)
* With the patch it appears correctly (e.g. Outrepasser)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jan Kissig <jkissig@th-wildau.de> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Shi Yao Wang [Fri, 2 Dec 2022 21:06:35 +0000 (16:06 -0500)]
Bug 31694: (follow-up) Fix preset display issue
Preset column should now display the right preset.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jan Kissig <jkissig@th-wildau.de> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Mon, 24 Oct 2022 22:40:28 +0000 (22:40 +0000)]
Bug 31694: (follow-up) Further improve translatability
To test:
* Add rules fo different modules and with different settings
* Verify the saved module description for a saved rule matches the pull down
* Verify the saved filter matches the pull downs (especially for source and patron category)
Also:
* Renames 'User category' to 'Patron category'
* Remove some values from translations, that shouldn't be translated, like value attributs for options.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jan Kissig <jkissig@th-wildau.de> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 31694: MARC overlay rules presets don't change anything if presets are translated
This patch corrects option value names in MARC overlay rules to prevent
them from being translated.
To test:
1. Install a new language
1.1. In a terminal, run the following commands
gulp po:update
cd misc/translator
./translate install xx-XX
1.2. Go to Administration > Global system preferences
1.3. Search for language
1.4. In the language syspref check the box for the language you just installed
1.5. Save
2. In the staff interface in English, go to Administration > Record
overlay rules
3. In the column 'Preset' try the various options, note that the
'Added', 'Appended', 'Removed', and 'Deleted' settings change depending
on the chosen preset
4. Change the interface language
5. Redo step 3, notice that if the preset name is translated, the other
settings don't change
6. Apply patch
7. Redo step 3, the presets should now change the settings
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jan Kissig <jkissig@th-wildau.de> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 28012: Creating numbering pattern: mark mandatory fields required
If any of these fields were missing, notably the Numbering formula
then saving the new numbering pattern silently failed, it didn't give
any error but it didn't save any new pattern either.
Note that there is a plan to make description field optional, so even
if it currently is mandatory on the DB level we leave it optional
here (and due to people using production DB's in non-strict mode which
allows this to be optional).
To test:
1) After applying this patch make sure all the 3 fields must be
filled in
/cgi-bin/koha/serials/subscription-numberpatterns.pl?op=new
page and it cannot be saved without those.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 28012: Use definedness test instead of bool when checking whether to null fields
Saving a new numbering pattern didn't work without having to fill all
the fields, even those that are not mandatory.
To test:
1) Go to /cgi-bin/koha/serials/subscription-numberpatterns.pl
and try creating a new pattern, notice that only Name and
Description are mandatory after applying this patch
2) Make sure editing existing numbering patterns still works
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 22 Dec 2023 14:52:04 +0000 (14:52 +0000)]
Bug 31297: Allow null value for description in subscription_numberpatterns
To test:
1 - Go to Serials
2 - Add a enw subscription
3 - Select Vendor and record, click next
4 - Select Numbring pattern: Number, or any to populate forms
4 - Click 'show advanced pattern'
5 - 'Modify pattern'
6 - Add a new name
7 - 'Save as new pattern'
8 - Nothin happens
9 - Check logs:
C4::Serials::Numberpattern::AddSubscriptionNumberpattern(): DBI Exception: DBD::mysql::st execute failed: Field 'description' doesn't have a default value at /kohadevbox/koha/serials/create-numberpattern.pl line 58
10 - Apply patch
11 - Update database
12 - Restart all
13 - Click save again
14 - Success!
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Removed wrong 'out' from atomic update file.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Wed, 13 Dec 2023 09:32:12 +0000 (10:32 +0100)]
Bug 35557: Remove LoadResultsCovers
The JS function LoadResultsCovers is not used from the Staff interface.
It is supposed to load the local cover images in JS but actually we are embedding the thumbnail in the img tag.
Test plan:
Confirm that LoadResultsCovers was called but had no effect.
Note that the selector ^local-thumbnail only exists in shelfbrowser.inc
but results.js is only used from results.tt (not shelfbrowser.inc)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Tue, 12 Dec 2023 15:27:07 +0000 (10:27 -0500)]
Bug 35547: Show public "staff only" lists in addbybiblionumber.pl
When adding an item to a list from catalogue/detail.pl, we can see the
latest 10 public lists. If all those lists are set as "staff only" for
"Allow changes to contents from" they will not show up in the
addbybiblionumber.pl popup. This is because the query in the popup does
not look for "staff only" lists while the "Add to list" button does.
Test plan:
1) Create 11 "staff only" lists as staff member A
2) Log in as staff member B
3) Find a record, click the "Add to list" button, note you can see lists
2 through 11 here
4) In the pulldown, choose the "More lists" option
5) Note those lists are not visible in the "Choose list" pulldown under
"Select an existing list"
6) Apply this patch
7) Restart all the things!
8) Click the "More lists" option again
9) Those lists should now be in the pulldown!
Signed-off-by: sabrina <kiehl@mpis.mpg.de> Signed-off-by: Mikko Liimatainen <mikko.liimatainen@turku.fi> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Wed, 20 Dec 2023 16:50:40 +0000 (16:50 +0000)]
Bug 35619: Fix validation error alignment in change password form
Bug 31829 made a change to the change password form in the staff
interface to accommodate a gap in the CSS following the staff interface
redesign. This gap has been fixed, so we don't need a double class on
the fieldset.
With this change, the "hint" div can also be put back into place.
To test, apply the patch and locate a patron record in the staff
interface.
- Click the "Change password" button on the patron detail page.
- Confirm that the form layout looks correct.
- Enter mismatched passwords in the "New password" and "Confirm new
password" fields and click "Save"
- The validation error message should be aligned to the right of the
input field.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Sun, 10 Dec 2023 15:10:34 +0000 (15:10 +0000)]
Bug 35529: Avoid 'click' in link in library administration
It's not necessary to label a link with 'click', it being
a link and being formatted as such is enough.
To test:
* Go to administration > libraries
* Edit any library
* Verify link texts for UserCSS and UserJS
* Click to edit
* Click to collapse
* Apply patch, restart all
* Verify links have been updated, click removed
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Cook [Fri, 1 Dec 2023 02:36:56 +0000 (02:36 +0000)]
Bug 35455: Remove = in ICU for indexing/searching
This change more closely aligns ICU and CHR so that ICU also
removes the = character. This fixes issues in ICU when searching
with a : which gets transformed into a =. Without this change,
the Analytics features won't work for titles with a colon in them.
Test plan:
0. Apply the patch and import bibs from Bugzilla (using Staged MARC tools)
1. cp ./etc/zebradb/etc/phrases-icu.xml /etc/koha/zebradb/etc/phrases-icu.xml
2. cp ./etc/zebradb/etc/words-icu.xml /etc/koha/zebradb/etc/words-icu.xml
3. vi /etc/koha/zebradb/etc/default.idx
Change "charmap word-phrase-utf.chr" to "icuchain words-icu.xml" for "index w"
and "icuchain phrases-icu.xml" for "index p"
4. koha-zebra --stop kohadev
5. pkill zebrasrv
6. koha-zebra --start kohadev
7. koha-rebuild-zebra -a -b -f -v kohadev
8. Search for "Awesome title" and open the detail page
9. Note that the "Analytics: Show analytics" line shows up
10. Click that link
11. Note that it opens the "Cool article" record and it displays
"In: Awesome title: awesome subtitle"
12. Click that link
13. Note that it opens the "Awesome title" record
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Tue, 5 Dec 2023 17:09:26 +0000 (17:09 +0000)]
Bug 35493: Do not show housebound roles as collapsible unless the housebound module is on
To test:
1. HouseboundModule - disabled
2. CollapseFieldsPatronAddForm, add 'Housebound roles'
3. Edit/create a patron.
4. Notice the useless Housebound roles link at the top of the page
5. APPLY PATCH
6. Try 1 - 3 again, this time no Housebound roles at the top ( Show collapsed fields )
7. Turn on HouseboundModule and make sure it now shows
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds some missing links from the preservation module to the manual.
To test:
1. Go to Preservation > Trains
2. Click on a train name
--> You are brought to the Show train section of the Preservation chapter of the manual
3. Click Edit next to an item
--> You are brought to the Add items section of the Preservation chapter of the manual (there is no section specific to editing items, but the form to edit is the same as the form to add)
4. Go back to the trains list, and click the Edit button next to one of the trains
--> You are brought to the Trains section of the Preservation chapter of the manual (there is no section specific to editing trains yet)
Signed-off-by: Philip Orr <philip.orr@lmscloud.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Philip Orr <philip.orr@lmscloud.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 35463: Open erm and preservation help in new tab
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Philip Orr <philip.orr@lmscloud.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 35463: Link preservation module help to the manual
This patch links the various pages of the preservation module to each
specific section of the preservation module chapter in the manual.
To test:
1. Enable the PreservationModule system preference
2. Go to the Preservation module
3. Click "help" in the top right corner
--> You are brought to the manual, but not a specific page
4. Apply patch
5. Click "Help" in the top right corner
--> You are brought to the Preservation chapter of the manual
6. Click "Settings"
7. Click "Help" in the top right corner
--> You are brought to the Settings section of the Preservation chapter of the manual
8. Choose a not for loan status for items added to the waiting list (the mandatory field) and submit
9. Click "Add a new processing"
10. Click "Help" in the top right corner
--> You are brought to the Add a new processing section of the Preservation chapter of the manual
11. Fill out the form to create the processing and submit
12. Click "Edit this processing"
13. Click "Help" in the top right corner
--> You are brought to the Add a new processing section of the Preservation chapter of the manual (there is no edit a processing section)
14. Click "Waiting list"
15. Click "Help" in the top right corner
--> You are brought to the Waiting list section of the Preservation chapter of the manual
16. Add items to the waiting list
17. Click "Trains"
18. Click "Help" in the top right corner
--> You are brought to the Trains section of the Preservation chapter of the manual
19. Click "New train"
20. Click "Help" in the top right corner
--> You are brought to the New train section of the Preservation chapter of the manual
21. Fill out the form to create a new train and submit
22. Click "Add items"
23. Click "Help" in the top right corner
--> You are brought to the Add items section of the Preservation chapter of the manual
24. Also check ERM help links to make sure nothing is broken
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Philip Orr <philip.orr@lmscloud.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Nind [Wed, 30 Aug 2023 00:15:26 +0000 (00:15 +0000)]
Bug 34644: (follow-up) Additional edits to description
Linked system preference in description to cross reference, and
and removed the spaces in the bracketed text.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Tue, 29 Aug 2023 18:20:19 +0000 (14:20 -0400)]
Bug 34644: replacementprice is support by MarcFieldsToOrder but is not listed
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Tue, 29 Aug 2023 17:53:16 +0000 (13:53 -0400)]
Bug 34644: Improve readability of sysprefs
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Tue, 29 Aug 2023 17:48:30 +0000 (17:48 +0000)]
Bug 34644: Add clarifying text to sysprefs to indicate that MarcFieldsToOrder is a fallback to MarcItemFieldsToOrder
Clarify that fields will fall back to MarcFieldsToOrder from MarcItemFieldsToOrder.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 28 Nov 2023 15:03:07 +0000 (15:03 +0000)]
Bug 35417: Update breadcrumbs and page titles for vendor issues
This patch updates the vendor issues template so that title and
breadcrumbs follow the same pattern on other updated templates:
Translatable strings in the title and breadcrumbs using the template
WRAPPER.
To test, apply the patch and go to Acquisitions.
- Search for a vendor and view the details.
- Click the "Isssues" link in the sidebar.
- Check that the page title and breadcrumbs are correct in each
variation of the page:
- The main page
- New vendor issue
- Modify vendor issue
- Issue deletion confirmation
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Tue, 19 Dec 2023 10:45:59 +0000 (11:45 +0100)]
Bug 35600: Prevent checkouts table to flicker
The checkouts table is displayed in the DOM then hidden in JS, then we show it if the cookie is set.
This patch makes the table hidden by default, and show it if/when needed
Test plan:
Check an item out, see the checkouts list view
Play with "Always show checkouts automatically", refresh the page
=> UI should behave better than before this patch
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Mon, 18 Dec 2023 16:22:08 +0000 (16:22 +0000)]
Bug 35592: Fix closing tag in bookings alert
To test:
1 - View a record details page for a record with items
2 - Click on the 'Items' tab
3 - Change 'Bookable' to 'Yes' and update for an item
4 - View the details page - place a booking
5 - Checkout the item to the patron it is booked for
6 - Note the alert shows, but encompasses the whole page
7 - Apply patch
8 - Check in the item
9 - Checkout the item again
10 - Note the alert shows above the checkouts page as expected
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Tue, 5 Dec 2023 16:27:44 +0000 (16:27 +0000)]
Bug 35491: Add logging to RevertWaitingStatus
This patch simply adds a logaction line to RevertWaitingStatus
To test:
1 - Enable HoldsLog
2 - Place a hold
3 - Fill the hold
4 - Revert the waiting status
5 - Note there is no action log added
6 - Apply patch
7 - Repeat 2-4
8 - Confirm you now have a MODIFY action logged for the reversion
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Fri, 26 May 2023 15:42:08 +0000 (15:42 +0000)]
Bug 33847: Database update replaces undefined rules with defaults rather than the value that would be used
Bug 29012 introduces a database update that sets the default values for rules that are required but undefined. This functionally changes the results of the circulation rules.
Instead, this update should find value that is being used for that rule combo and use that as the rule value, only using the default in the case that the derived rule doesn't exist or has a null value.
Test Plan:
1) Check out Koha 22.05.05
2) Create a default all/all/all rule, 3 other rules. Ensure they all have Loan period set to 7, with one of the non-default rules having a Loan period of 14.
3) Delete all but one of the non-default rules with the following query:
Delete from circulation_rules where rule_name = 'issuelength' and ( rule_value != 14 and not ( branchcode is null and categorycode is null and itemtype is null ) ) limit 2;
4) Check out 254f721320
5) Run updatedatabase.pl and restart
6) Note the rules were recreated with the value 0
7) Repeat steps 1-4
8) Apply this patch
9) If you're using the same database, set the version to 22.0600023 and restart
10) Run updatedatabase.pl
11) Note the rules were recreated, but the value is the derived value from the all/all/all rule!
Signed-off-by: Kevin Carnes <kevin.carnes@ub.lu.se> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Bug 33847: Rewrite to use SQL
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Squashed, and added reference to new bug too Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Sat, 11 Nov 2023 11:06:32 +0000 (11:06 +0000)]
Bug 30287: (follow-up) Make unit test more reliable in ktd
This patch mocks NoticeCSS earlier to ensure we're not inadvertantly
failing due to a local setup in ktd having added to the preference.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Wed, 8 Nov 2023 09:38:18 +0000 (09:38 +0000)]
Bug 30287: (follow-up) Unit test for html_content
This patch adds a unit test for the new `html_content` method introduced
to Koha::Notice::Template in the previous patch.
Test
1) Run the new unit test ;P
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Mon, 6 Nov 2023 14:00:21 +0000 (14:00 +0000)]
Bug 30287: (follow-up) Add content wrap matching send time
This patch adds a new method to the Koha::Notice::Message class to wrap
content in the same way we currently do at email send time. We then
update the notice preview to use this method so we're embedding
NoticeCSS into that iframe. This means the generated preview should now
exactly match how your notice will display in email clients including
any CSS you may have placed within NoticeCSS.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Fixed typo in POD of html_content
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Mon, 6 Nov 2023 12:50:05 +0000 (12:50 +0000)]
Bug 30287: Conditionally render notice preview
This patch adds conditional formatting based on whether the notice was
generated from an HTML template or a plaintext one. We simply drop the
'html_line_break' filter for the case where the notice should already be
html formatted.
I was tempted to replace the html_line_break for plaintext formatted
notices too as I believe this closer resembles how we actually output
such generated notices.. but I decided that should be for another bug.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Wed, 15 Nov 2023 10:44:37 +0000 (11:44 +0100)]
Bug 35309: Remove DT's fnSetFilteringDelay
On bug 35284 we added the delay on the column filters using dt's
throttle builtin function.
From doc:
https://datatables.net/plug-ins/api/fnSetFilteringDelay
"""
Please note that this plug-in has been deprecated and the dt-init searchDelay option in DataTables 1.10 should now be used. This plug-in will not operate with v1.10+.
Test plan:
Note that column filtering still work as before (test on different
tables, see bug 35284 for the list)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Mon, 27 Nov 2023 15:12:41 +0000 (16:12 +0100)]
Bug 35405: Remove noise from MARC::Record in SearchAuthorities
We are calling ->field with an undef parameter.
MARC::Record does not like that and says:
Use of uninitialized value $tag in hash element at /usr/share/perl5/MARC/Record.pm line 202.
For now, a fix at our side.
Test plan:
Run SearchAuthorities without passing an authtypecode.
Without this patch, it results in a warning per hit.
With this patch, the noise should be gone.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Wed, 6 Dec 2023 10:03:45 +0000 (10:03 +0000)]
Bug 35204: Prevent an expired password from throwing a 500 error
Currently when a patron with an expired password is authenticated via the API a 500 error is returned rather than a 400 "Validation failed" error. This patch catches the return value for an expired password and returns the validation failure before the patron search is attempted.
Test plan:
1) Choose a patron and set their password expiry date to a date in the past
2) Send a request to auth/password/validation as an authenticated user with that patron's details
3) The response should be a 500 error
4) Apply patch
5) Repeat steps 1-3 and this time the response should be a 400 code with an error message of "Password expired"
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Tue, 5 Dec 2023 15:47:23 +0000 (15:47 +0000)]
Bug 35489: Add a hidden input for itemnumber even if item has no barcode
This page is a single form, all fields must have inputs to avoid data loss/mismatch
To test:
1 - Find a record in the catalog and add or edit items to have one item with a barcode and one without
2 - Place an item level hold on the item with no barcode
3 - Place another hold for a different patron on the item with a barcode
4 - From the holds table add an expiration date to the hold with a barcode and save
5 - Note the hold on the item with no barcode is now on the item with a barcode and the other hold is now a next available hold
6 - Delete the holds
7 - Apply patch
8 - Repeat 2-4
9 - Confirm the itemnumbers for the holds have not changed
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Fri, 15 Dec 2023 12:22:53 +0000 (12:22 +0000)]
Bug 35574: Tidy
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Fri, 15 Dec 2023 11:11:56 +0000 (11:11 +0000)]
Bug 35574: Don't show the link either
This patch adds the check for permission to the biblio menu item too.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Fri, 15 Dec 2023 11:05:42 +0000 (11:05 +0000)]
Bug 35574: Add unit tests for api change
We add the corresponding unit tests for the biblio/bookings endpoint to
ensure no regressions in the future.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Thu, 14 Dec 2023 17:43:17 +0000 (17:43 +0000)]
Bug 35574: Correct api permission for listing biblio specific bookings
To test:
1 - Follow above plan and apply only first patch
2 - Not the table does not load (403: Forbidden)
3 - Apply this patch
4 - Reload
5 - Success!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Thu, 14 Dec 2023 17:10:35 +0000 (17:10 +0000)]
Bug 35574: Bookings tab from biblio details should only require manage_bookings permission
TO test:
1 - Find or create a staff user
2 - Grant permissions:
circulate: manage_bookings, circ_remaining_permissions
catalogue
3 - Open a record details, go to items tab, mark an item as bookable
4 - Sign out and sign in as the patron above (or use a private window to sign in)
5 - Place a booking on the record located above
6 - Success
7 - Try to view the bookings tab
8 - Fail, you don't have permission
9 - Apply patch
10 - Success!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates several files which use the term "issues" without
context, changing them to "Vendor issues." Unchanged is the vendor
issues page template, vendor_issues.tt, which is updated in Bug 35417.
To test, apply the patch and go to Acquisitions.
- Search for a vendor and view the details.
- You should see a "Vendor issues" link in the sidebar.
- Go to Patrons and search for a patron. View the patron's details.
- Click More -> Set permissions.
- Under Acquisitions management you should see "Manage vendor issues
(issue_manage)"
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Sun, 10 Dec 2023 14:55:20 +0000 (14:55 +0000)]
Bug 35528: Remove 'click' from links in system preferences
It's not necessary to label a link with 'click', it being
a link and being formatted as such is enough.
This updates the occurences in the sytem preferences editor.
To test:
* Go to system preferences like OpacUserCSS that allow editing
in a textarea
* Verify link descrptions for editing and collapsing the area
* For a section of grouped system preferences, hover over the
arrow and verify the text for collapsing/uncollapsing the area
* Apply patch, restart all
* Verify the links and tool tips have been updated
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Sun, 10 Dec 2023 14:00:04 +0000 (14:00 +0000)]
Bug 35526: Fix terminology and spelling for ERM data providers
This makes several changes on the form for adding a data provider
and on the data provider details page:
* Enable ERMModule system preference
* Go to the ERM module, add a new data provider
* Look at the labels on the form
* Save and check the labels on the summary tab
* Apply patch, run: yarn build
* Verify fixes
...Id => ID
...sushi => SUSHI
...counter => COUNTER
...Report Release => Report release
...
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Sun, 10 Dec 2023 13:41:46 +0000 (13:41 +0000)]
Bug 35525: Fix spelling of SMS in aria-labels for messaging in OPAC
Updates sms to SMS.
* Set SMSSendDriver system preference to Email
* Go to the OPAC patron account, messaging tab
* Check some SMS check boxes and save
* Verify that in the source code the aria-label for the
checked and unchecked checkboxes reads: sms messaging
* Verify that in the source code for the 'days in advance'
pull down, the message reads "... receive notice"
* Apply patch, restart all
* Verify that the source code for the checked and unchecked
the aria-label now reads "Select/Unselect SMS messaging"
* Verify that the aria-label on the 'days in advance' pull
down now reads 'receive the message'
Also fixes a mismatched itiva message.
Repeat test plan with TalkingTechItivaPhoneNotification Enabled
and the phone checkboxes.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Sun, 10 Dec 2023 13:29:29 +0000 (13:29 +0000)]
Bug 35524: Fix terminology in basket group CSV export
Bookseller should be vendor to match our preferred terminology.
To test:
* Run:
prove t/db_dependent/Acquisition/GetBasketGroupAsCSV.t
* Add a basket with at least one order line
* Close basket and add to a basket group
* Close the basket group
* Export as CSV
* Verify headers include "Bookseller"
* Apply patch, restart all
* Repeat export, it should now say "Vendor"
* Rerun tests
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Katrin Fischer [Sun, 10 Dec 2023 13:21:29 +0000 (13:21 +0000)]
Bug 35523: Fix doubled up quotes in cash register title
Updates ''{cash_register}'' to '{cash_register}'
To test:
I believe this is not actually testable, as cash registers
can only be archived and not deleted?
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Mon, 4 Dec 2023 14:22:11 +0000 (15:22 +0100)]
Bug 35476: Make 'Submit' buttons translatable in vue components
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Tue, 28 Nov 2023 17:24:53 +0000 (12:24 -0500)]
Bug 18139: Add/update unit tests
Signed-off-by: Eric Gosselin <eric.gosselin@inlibro.com> Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Kyle M Hall [Tue, 28 Nov 2023 14:57:55 +0000 (14:57 +0000)]
Bug 18139: Display the rule critera used to determin the checkout limits to the template
The too many checked out message can be very confusing for librarians
when the limit specified is more or less than the number of checkouts
the patron already has. We should make it clear to the librarian that
his is only counting certain types of checkouts by giving them the
issuing rule criteria used.
Test Plan:
1) Apply this patch
2) Try to check out more items than the circ rules allow for
regular and on-site checkouts
Signed-off-by: Eric Gosselin <eric.gosselin@inlibro.com> Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Marcel de Rooy [Fri, 15 Dec 2023 08:31:33 +0000 (08:31 +0000)]
Bug 35507: Add verbose parameters in Koha::Plugins
Yet another approach ;)
Driemaal is scheepsrecht / Third time lucky..
Test plan:
Run prove $(git grep -l Koha::Plugin | grep -P "^t\/db")
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Removing the CGI::Session behavior to auto-commit by mocking
SessionStorage makes that the $plugin->test_template does no
longer commit.
Since KitchenSink includes a CREATE TABLE, removing that code
removes the second implicit commit. We might move that code
to its own script?
Adds a missing rollback too at the end.
Test plan:
Run prove t/db_dependent/Koha/Plugins/Plugins.t
Verify that no records got added to plugin_data/methods table.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Tue, 5 Dec 2023 18:04:47 +0000 (18:04 +0000)]
Bug 35496: Open article requests tab by default on opac-user.pl after placing an article request
To test:
1 - Turn on ArticleRequests
2 - Place an Article Requests on the opac
3 - Note after placing the request the URL is:
http://localhost:8080/cgi-bin/koha/opac-user.pl#opac-user-article-requests
4 - Note the article request tab is not active
5 - APPLY PATCH and restart_all
6. Try steps 2 - 4 again, this time the article request tab should be open by default.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Tue, 5 Dec 2023 17:47:50 +0000 (17:47 +0000)]
Bug 35495: Open holds tab by default on opac-user.pl after cancelling a hold
To test:
1 - Go to the opac-user.pl page for a user with some holds and cancel a hold.
2 - Note after placing the hold the URL is:
http://localhost:8080/cgi-bin/koha/opac-user.pl?#opac-user-holds
3 - Note the holds tab is not active
4. APPLY PATCH and restart all
5. Now after cancelling a hold, the refreshed page should have an active hold tab.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Tue, 5 Dec 2023 16:50:37 +0000 (16:50 +0000)]
Bug 35492: Open holds tab by default on opac-user.pl after suspending a hold
To recreate:
1. Go to the opac-user.pl page for a user with some holds and suspend
a hold.
2. Note after placing the hold the URL is:
http://localhost:8080/cgi-bin/koha/opac-user.pl?#opac-user-holds
3 Note the holds tab is not active
4. APPLY PATCH and restart all
5. Now after suspending a hold, the refreshed page should have an active
hold tab.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Lucas Gass [Tue, 5 Dec 2023 16:40:15 +0000 (16:40 +0000)]
Bug 35488: Open holds tab by default on opac-user.pl after placing a hold
1 - Place a hold on the opac
2 - Note after placing the hold the URL is:
http://localhost:8080/cgi-bin/koha/opac-user.pl?#opac-user-holds
3 - Note the holds tab is not active
4 - APPLY PATCH and restart_all
5 - Try steps 1 - 3 again, this time the holds tab should be opened.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Tue, 12 Dec 2023 16:52:14 +0000 (16:52 +0000)]
Bug 35468: (follow-up) Test only the specific permission needed
The tests were granting circulation top-level permissions - we should be able to
perform the actions with only 'manage_bookings'. This patch updates the tests to
use the narrower permission.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Tue, 12 Dec 2023 16:37:49 +0000 (16:37 +0000)]
Bug 35468: (follow-up) Fix QA complaints
Tidyness
Use dt_from_string, not DateTime->now
Add exec flag
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Tue, 12 Dec 2023 14:53:09 +0000 (14:53 +0000)]
Bug 35468: Unit tests
This patch adds all the 'basic' unit tests one would expect to find with
the api endpoints. I've been working on this as a follow-up to bug
29002 as promised, but hadn't yet submitted them as I wanted to get the
full coverage.. but having these basics in early makes sense whilst I
continue on the more advanced cases.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Tue, 12 Dec 2023 13:10:29 +0000 (13:10 +0000)]
Bug 35468: Correct api bookings permission
At some point during development we migrated from 'parameters' to
'circulate' for the manage_bookings sub-permission. Unfortunately, the
corresponsing API definition missed the update.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Wed, 29 Nov 2023 09:02:50 +0000 (10:02 +0100)]
Bug 35428: Remove temporary files for gulp po tasks
gulp po:update will generate 1 /tmp/koha-* directory per task.
We need to remove them when the script does not longer need them.
Test plan:
0. Do not apply this patch
1. ls -ltr /tmp
2. gulp po:update --lang es-ES
3. ls -ltr /tmp
=> Notice new koha-* directories
Repeat 2, 3
4. Apply this patch and try again
=> No new directories when the job is done
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Wed, 6 Dec 2023 15:13:20 +0000 (15:13 +0000)]
Bug 35498: Allow tab to indent lines and trigger autocomplete
This patch allows the tab key to indent lines as well as trigger autocomplete.
Test plan:
1) Apply patch, navigate to reports and create a new SQL report
2) Click in the text editor and press tab, it should indent and then trigger the autocomplete options
3) Type something to select from the autocomplete box and press tab - it should autocomplete that option
4) Type any word and then press space. Now press tab and it should indent again
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Fri, 10 Nov 2023 11:31:28 +0000 (11:31 +0000)]
Bug 35310: Show current renewal value of the currently active check out
Test plan, with the previous 2 patches applied:
1) Checkout an item to Koha user, barcode 39999000003192
2) Renew that barcode
3) Visit the items page of the biblio record, click on 'View' in front of 'Current renewals'
/cgi-bin/koha/catalogue/moredetail.pl?biblionumber=76
4) Notice it shows the renewals as expected
5) Return the same item: 39999000003192
6) Repeat 1) to 3). Notice it shows 2 current renewals even tho only 1 corresponds to the currently active check out
7) Renew again. Notice it shows 3 current renewals even tho only 2 correspond to the currently active check out
7) Apply this patch. Notice it now only shows 2 current renewals
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Fri, 10 Nov 2023 11:01:58 +0000 (11:01 +0000)]
Bug 35310: Only show 'Current renewals' link if item is currently checked out
1) Checkout an item to Koha user, barcode 39999000003192
2) Renew that barcode
3) Visit the items page of the biblio record, click on "View" in front of "Current renewals"
/cgi-bin/koha/catalogue/moredetail.pl?biblionumber=76
4) Notice it shows the renewals as expected
5) Return the same item 39999000003192
6) Repeat 3). Notice it never loads renewals and network console shows HTTP error 400
7) Apply this patch. Repeat the test plan. Notice the 'Current renewals' no longer shows for the item because it is no longer checked out, so whatever past renewals are no longer 'current'
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Pedro Amorim [Fri, 10 Nov 2023 11:00:55 +0000 (11:00 +0000)]
Bug 35310: Only show 'Current renewals' <li> entry if there are current renewals
'Current renewals' is always showing, even if empty.
Test plan:
1) Checkout an item to Koha user, barcode 39999000003192
2) Renew that barcode
3) Visit the items page of the biblio record, click on "View" in front of "Current renewals"
/cgi-bin/koha/catalogue/moredetail.pl?biblionumber=76
4) Notice all items have the 'Current renewals' label entry, but only the checked out item in step 1) has the 'Current renewals' label entry
5) Apply patch. Notice only the item with current renewals is showing the 'Current renewals' label entry with the respective value.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Fri, 1 Dec 2023 16:34:28 +0000 (16:34 +0000)]
Bug 35450: Preservation system preferences should authval dropdowns
This patch updates two preservation module system preferences so that
they offer dropdowns of "Not for loan" values instead of requiring entry
of a specific code.
The patch also adds a missing "." at the end of one preference
description.
To test, apply the patch and restart services.
- Go to Administration -> System preferences.
- Search for "preservation"
- Check that the "PreservationNotForLoanDefaultTrainIn" and
"PreservationNotForLoanWaitingListIn" preferences have dropdowns
offering "Not for loan" values.
- Confirm that your choices are correctly saved.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Tue, 3 Oct 2023 16:59:16 +0000 (16:59 +0000)]
Bug 34398: Fix inconsistencies in Record matching rules page titles, breadcrumbs, and headers
This patch fixes some inconsistencies in the record matching rules
administration page, making sure the page title, breadcrumb
navigation, and page headers are consistent with each other.
Some controls on this page have been updated to use Bootstrap link style
with Font Awesome icons added.
Test each page to confirm that page title, heading, and breadcrumbs are
consistent:
- Administration -> Record matching rules
- New record matching rule
- Edit record matching rule
- Delete record matching rule
- Test the process of adding new match points and new match checks,
and removing match points and match checks.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Fri, 1 Dec 2023 16:46:47 +0000 (16:46 +0000)]
Bug 35449: Accessibility: No links on "here"
This patch updates two system preferences, "OPACUserJS" and
"OPACUserCSS" so that the "here" links in the description instead read
"library administration".
To test, apply the patch and go to Administration -> System preferences.
- Search for "opacuser"
- The descriptions of the "OPACUserJS" and "OPACUserCSS" preferences
should include the phrase "...can be defined in library
administration," with "library administration" leading to the correct
page.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
projects / koha.git / log