Marcel de Rooy [Thu, 26 Oct 2017 07:31:50 +0000 (09:31 +0200)]
Bug 9031: (QA follow-up) Final changes to Calendar::days_between
The crash is caused by comparing two datetimes where one datetime is
floating and the other one was not. In that case the floating is
converted. Note too that DateTime overloads comparison operators.
This patch clones the two dates first. Puts them in floating both. And
just after that starts comparing etc.
Similar small change in hours_between.
Adding a test where the parameters are swapped for days_between.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Tue, 14 Mar 2017 16:46:28 +0000 (12:46 -0400)]
Bug 9031: Overdue items crossing DST boundary throw invalid local time exception
To test:
1 - Set TZ to America/New York
2 - Checkout item and set due date to '2016-03-09 02:29:00"
3 - Make sure fines are set for the item type, fine mode production,
calculate fines on return
4 - Check in item - invalid date time warning in logs
5 - Apply patch
6 - Check in item - no error
7 - prove t/Calendar.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 9031: Use floating instead of UTC
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Squashed the changes for Calendar.pm; will add a follow-up to finally
overcoming the crash on Invalid local time.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Thu, 26 Oct 2017 07:13:38 +0000 (09:13 +0200)]
Bug 9031: (QA follow-up) Pass the same timezone in Calendar.t
We do not need to change $ENV{TZ} or call tzset.
Pass $tz too for the second date.
Replace checking the datetime hash by delta calls.
Replacing the number of minutes.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
We will still crash with:
Invalid local time for date in time zone: America/New_York
But the changes in Calendar.pm will now resolve that.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Fri, 7 Jul 2017 13:03:39 +0000 (13:03 +0000)]
Bug 9031: Unit tests for DST crossing in (days|hours)_between
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Without the patch for Calendar.pm, this crashes on:
Invalid local time for date in time zone: America/New_York
But even with the original change to Calendar.pm, I would see:
Invalid local time for date in time zone: Europe/Amsterdam
Adding a follow-up for that.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Wed, 18 Oct 2017 14:03:57 +0000 (16:03 +0200)]
Bug 19493: Remove few warnings from circulation.pl
If you click Submit on the staff home page without entering a cardnumber, you will find these warnings in the log:
Problem = a value of override_high_holds has been passed to param without key at /usr/share/koha/masterclone/C4/Templates.pm line 137.
Problem = a value of nopermission has been passed to param without key at /usr/share/koha/masterclone/C4/Templates.pm line 137.
Use of uninitialized value $val in concatenation (.) or string at /usr/share/koha/masterclone/C4/Templates.pm line 137.
Problem = a value of has been passed to param without key at /usr/share/koha/masterclone/C4/Templates.pm line 137.
In this specific case GetDebarments returns undef in list context (empty list),
so all items in the list shift one place.
Either we should force GetDebarments to return []; or we force scalar context in a construction like this. This patch does the last thing.
Note: The calls in memberentry.pl and moremember.pl are not affected.
Test plan:
[1] Do not apply. Click Submit without cardnumber. Check the log.
[2] Apply. Click Submit again without cardnumber. Check log.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds unit tests for the introduced changes in
build_query_compat.
It removes a warning too.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Wed, 18 Oct 2017 21:00:44 +0000 (21:00 +0000)]
Bug 16660: Add support for OpacSuppression to Elasticsearch
To test:
1 - Enable suppression
2 - Suppress some records
3 - Apply all the patches
4 - Reindex ES
5 - Search and don't get suppressed records
6 - Disable suppression
7 - Search and get all the records
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Srdjan [Tue, 28 Feb 2017 02:17:49 +0000 (15:17 +1300)]
Bug 16660: Moved Opac Supression filtering from opac-search.pl to Zebra::QueryBuilder
To test:
OPAC: Both SearchEngine "Elasticsearch" and "Zebra" should work with
OpacSuppression set to "yes"
NB: OPAC suppression is not implemented for Elasticsearch
Signed-off-by: David Bourgault <david.bourgault@inlibro.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mason James [Thu, 1 Dec 2016 00:38:51 +0000 (13:38 +1300)]
Bug 18118: Unexpected behaviour with 'GoogleOpenIDConnect' and 'OpacPublic' syspref combination.
TEST PLAN
----------
1/ configure a working 'GoogleOpenIDConnect' account
See comment #5 which also links back to
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=16892#c3
2/ set 'OpacPublic' (under OPAC) to 'Disabled' and
'GoogleOpenIDConnect' (under Administration) to 'Yes'.
3/ log in user successfully via google-auth, observe redirect to
opac-user.pl (bad)
4/ apply patch
-- on kohadevbox remember to restart all! Plack is unforgiving. :)
5/ log in user successfully via google-auth, observe expected
redirect to opac-main.pl (good)
While I would normally suggest running koha qa test tools, because
this file doesn't end in .pl, it doesn't get picked up by them.
6/ perlcritic -4 opac/svc/auth/googleopenidconnect
-- notice this is a level better than required. :)
This also eyeballs easily well.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Wed, 18 Oct 2017 14:00:34 +0000 (16:00 +0200)]
Bug 19484: Add test before using object itemtype
Patch applies and functions as described. I agree with you that importing NULL itemtypes is possible Marcel. A higher importance level makes sense.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 25 Oct 2017 20:29:16 +0000 (17:29 -0300)]
Bug 19531: When saving patron record do not redirect to circ if not authorised
If the logged in patron does not have the necessary permission we should
not redirect to circulation.pl but moremember.pl instead
Test plan:
With the borrowers permission, you should be able to edit a patron and
be redirect to the moremember page
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The intranet advanced search page offers to search for groups of
libraries, even if the pull down is empty as no library groups have
been defined.
Test plan:
- Go to the adv search page at the intranet
- Without library group you must not see the "Groups of libraries"
dropdown list
- With at least a library group you must see it
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 2 Oct 2017 19:42:46 +0000 (16:42 -0300)]
Bug 19069: Fix 'does not match' behaviour in MARC modification template
The "does not match" condition does not behave as expected.
We want it to process the action if the subfield exists and that the
value does not match a given pattern.
Test plan:
Be creative and write different template actions using the "does not
match" condition.
Using the "Batch record modification" and the "Show MARC" popup, confirm
that the processed record is the one you are expecting.
Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Alex Buckley [Thu, 24 Aug 2017 21:25:40 +0000 (21:25 +0000)]
Bug 19029: Add JavaScript security question for cloning circ rules
This patch introduces a Javascript security question which is displayed
to the user when they try to clone a circulation rule to a specific
branch when the rule is a 'Standard rule for all libraries"
The rationale for this patch is when the cloning takes place it
overwrites the existing rules of the destination branch and there is no
notification of this to the user. Therefore by implementing this patch
the user is asked if they want to clone the rule (if the rule is
standard accross all libraries) and are told that it
will overwrite the rules in the destination branch.
Test plan:
1. Create a circulation rule for all libraries
2. Make sure the 'select a library' option is set to 'Standard rules for all
libraries"
3. Click the 'Clone' button and notice that the cloning takes place
without any warning that it will overwrite the rules of the destination
branch
4. Apply patch
5. Return to the circulation and fine rules page
6. Repeat step 2
7. Click the clone button and notice a alert box appears asking if you
are sure you want to clone the standard rule to the destination branch.
Note: The name of the destination branch is included in the alert.
Also note that the user is informed of the consequences of performing
the action, i.e. that it will overwrite the existing rules in the
destination branch
8. Click 'Cancel' and notice that no cloning occurs
9. Click the clone button again and this time click 'OK' and notice
that the cloning takes place
10. Return to the Circulation and fine rules page and set the 'Select a
library' option to the name of an individual branch
11. Click the clone button and notice that the clone action takes place
Sponsored-By: Catalyst IT Signed-off-by: David Bourgault <david.bourgault@inlibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Alex Arnaud [Thu, 12 Oct 2017 07:24:33 +0000 (07:24 +0000)]
Bug 19443: Remove duplicate message when editing existing patron
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Alex Arnaud [Tue, 10 Oct 2017 15:21:35 +0000 (15:21 +0000)]
Bug 19443: Wrong HTML in patron creation page (members/memberentry.pl)
The form provided on top of the page if Koha find a duplicate
patron is not closed. This cause some trouble.
Test plan:
- Edit the syspref IntranetUserJS and type the following code:
"$(document).ready(function() {
$("#memberentry_library_management").insertBefore("#memberentry_identity");
});"
- create a patron so that Koha will warn you about a duplicate one,
- click on "Not a duplicate. Save as new record",
- you should get error(s) about empty field(s).
Note that now, the library management part's fields are empty or
reset to default
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 17 Oct 2017 13:55:09 +0000 (10:55 -0300)]
Bug 12363: Add a switch to mark|do not mark items as returned when lost
There are several ways to mark an item an lost:
- item list view (catalogue/moredetail.pl, "Items" tab)
- cataloguing (cataloguing/additem.pl)
- Batch item modification tools (tools/batchMod.pl)
- The long overdue cronjob (misc/cronjobs/longoverdue.pl)
So far only the cronjob is configurable, the others mark the item as
returned (does the checkin).
This behaviour should be controlable using a syspref, to let libraries
choose what fit best for them.
Test plan:
Use the 2 options of the pref, mark checked out items as lost using the
different possibilities, and confirm that the behaviours make sense to
you
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 17 Oct 2017 13:54:33 +0000 (10:54 -0300)]
Bug 12363: Add new pref MarkLostItemsAsReturned
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
David Cook [Tue, 10 Oct 2017 01:05:16 +0000 (12:05 +1100)]
Bug 18884: Advanced search on staff client, Availability limit not properly limiting
Patch applies and functions as described.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Andreas Roussos [Fri, 20 Oct 2017 19:58:27 +0000 (22:58 +0300)]
Bug 19503: Duplicating a dropdown menu subfield yields an empty subfield tag
While editing a record in the staff client, if you clone a repeatable
dropdown subfield the cloned subfield's tag is empty. This can result
in data loss if the record is saved, re-opened, and saved yet again.
This patch (originally written by Sophie MEYNIEUX for bug 17818) fixes that.
Test plan:
0) [PREREQUISITE] In your MARC framework (Home > Administration > MARC
bibliographic framework) ensure that you have at least one subfield
of a particular tag linked to an authorised value (e.g. in UNIMARC,
tag 700 subfield 4 is 'Relator Code' and can be linked to CCODE for
testing purposes). This is so that the relevant subfield will be a
dropdown menu and not a textbox.
1) In the Staff Client, edit an existing record or create a new one.
Then, try to clone any subfield that is a dropdown menu. Observe
that the cloned subfield's tag is empty.
2) Apply the patch.
3) Hit CTRL-F5 in your browser (to ensure cataloging.js is re-loaded)
and try to clone a dropdown menu subfield again. This time the tag
is cloned as well.
Working as intended.
Signed-off-by: Simon Pouchol <simon.pouchol@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=16503
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 4 Oct 2017 20:49:51 +0000 (17:49 -0300)]
Bug 19117: Add CSRF protection to paycollect.pl
Security bug, trivial changes, no need to provide procedure for script
kiddies.
Test plan:
Pay fines using the different options from the "Pay fines" tab.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18956: (QA follow-up) Resolve a CGI::Param in list context warn
From the plack-error.log:
CGI::param called in list context from package CGI::Compile::ROOT::usr_share_koha_masterclone_opac_opac_2dpassword_2drecovery_2epl line 129, this can lead to vulnerabilities. See the warning in "Fetching the value or values of a single named parameter" at /usr/share/perl5/CGI.pm line 436.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a floating toolbar to the staff client search results
page, making all the various controls visible as the user scrolls down.
To test, apply the patch and perform a catalog search in the staff
client.
- The toolbar should "stick" to the top of the page as you scroll down.
- Controls in the toolbar should all work correctly:
- Select all / Clear all
- Highlight / Unhighlight
- Add to Cart
- Cart notifications should be positioned correctly
- Add to list (and all list menu controls)
- Place hold (including controls which are visible when
a "Search to hold" has been initiated
- Z39.50/SRU search
- Sort
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the OPACShowBarcode syspref in favour of the new
columns settings option introduced by bug 16759.
On the upgrade step, it picks the value for OPACShowBarcode and uses it
to populate the columns_settings table.
To test:
- Verify the upgrade process maintains the current behaviour
Regards
Sponsored-by: Dover
Followed test plan and works as expected. Functionality of patch from bug 16759
appears intact too. Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Mon, 21 Aug 2017 13:27:20 +0000 (15:27 +0200)]
Bug 17381: Add system preference SCOMainUserBlock
This patch adds a system preference SCOMainUserBlock to display custom HTML
on the self checkout page.
To test:
- Set up self checkout (see section Self Checkout in Circulaton sysprefs )
- Apply patch
- Update db
- Add some HTML system preference SCOMainUserBlock
- Go to sco page
- Verify that HTML displays on page (logged in and not logged in)
New version based on Koha.Preference TT plugin as of comment #7
Depends on Bug 12691
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 25 Oct 2017 14:56:31 +0000 (11:56 -0300)]
Bug 19028: Add a note to the pref description
The idea was to keep the current behaviour, plus adding the option to
display on a separate column.
We need an explanation on the syspref description, stating that it is not enough to
choose 'on a separate column', enabling the colum in the columns
settings is required for it to take effect.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 19028: Add 'shelving location' to holdings table in detail page
This patch adds the option to show shelving locations on a separate
column. This is controlled by a new syspref, 'OpacLocationOnDetail',
which replaces 'OpacLocationBranchToDisplayShelving', adding a
conveniente 'column' option.
The new 'Shelving location' column is conveniently added to the columns
configuration entry added by bug 16759 for this purpose.
The current behaviour is preserved.
To test:
- Apply this patches
- Run the upgrade:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ perl installer/data/mysql/updatedatabase.pl
=> SUCCESS: Upgrade doesn't fail
- Have an item with shelving location set to something not void
- Have the item set home and holding libraries for testing purposes.
- Set 'OpacLocationBranchToDisplay' to 'home and holding libraries' [*]
- Visit the OPAC detail page for the record containing the item
=> SUCCESS: Both home and holding libraries are displayed.
- Loop through all OpacLocationOnDetail options (except from 'column', we leave it for later).
=> SUCCESS: Works as expected.
- Go to Administration > Columns settings
- Make item_shelving_location available in the OPAC section
- Reload the OPAC detail page
=> SUCCESS: No change
- Set OpacLocationOnDetail to 'on a separate column'
- Reload the OPAC detail page
=> SUCCESS: Shelving location is displayed on a separate column
- Sign off :-D
Sponsored-by: Dover
[*] For testing purposes
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch renames the 'OpacLocationBranchToDisplayShelving' syspref into
'OpacLocationOnDetail' and adds it a fourth option, 'column', that makes
the OPAC display shelving location on a separate column, instead of the
library names (home, holding or both).
Sponsored-by: Dover Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the holdings table in the OPAC biblio detail page
configurable using the Columns configuration tools.
This patch:
- Moves the holdingst table from plain DataTable to KohaTable
- Creates a sample yml colvis configuration for this table
containing all the currently available columns
To test:
- Visit some record's detail page in the OPAC
- Apply this patch
- Reload
=> SUCCESS: The page shows the same information
- On the staff interface, go to:
Home > Administration > Columns settings
=> SUCCESS: There's a new OPAC section containing the configuration for
holdingst.
- Choose to hide some fields (both currently displayed and currently hidden).
- Reload the OPAC detail page
=> SUCCESS:
- Required fields are hidden
- It doesn't explode because of trying to hide stuff that is not there to start with
- Sign off :-D
Sponsored-by: DOVER Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Followed test plan, patch worked as described. Also passed QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 12 Jul 2017 12:32:24 +0000 (09:32 -0300)]
Bug 17277: Always display location and *branch item info - opac detail
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 24 Oct 2017 17:53:36 +0000 (14:53 -0300)]
Bug 19513: Re-add AnonymousPatron-related tests
These tests are still useful
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The AddMember call is considerably slowing it down. A call to TestBuilder
would be an improvement for performance.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Fri, 20 Oct 2017 07:03:35 +0000 (09:03 +0200)]
Bug 19513: More changes to MarkIssueReturned.t (after bug 19487)
This patch was initially created as QA follow-up on 19487.
$dbh is not used
$categorycode is no longer used
%item_branch_infos not used
$borrowernumber is obsoleted by using $patron
No real need for $anonymous_borrowernumber (Since MarkIssueReturned returns
undef rightaway for an invalid itemnumber, the privacy stuff is irrelevant.)
No AddMember calls, removing unneeded modules
Adding a test that calls MarkIssueReturned on an item already returned.
Test plan:
[1] Run t/db_dependent/Circulation/MarkIssueReturned.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Tue, 24 Oct 2017 12:12:52 +0000 (12:12 +0000)]
Bug 18735: QA Followup - add class to new option
New option creates a single item batch, this may cause issues for some
libraries or they may want to disbale this feature. Adding a class to
the list item allows it to be hidden easily
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nazlı [Thu, 29 Jun 2017 13:24:21 +0000 (16:24 +0300)]
Bug 18735: Print Barcode as soon as adding an item
For testing
1) Look for any records.
2) Go to the material edit page.
3) Under Actions you will see Print label under Duplicate.
4) When you click Print Label, the relevant material will be redirected
to the Label Creator module in the Tools menu.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18949: Adding thead tags to OPAC MARC details holdings table
So that it can be styled alongside other tables in the OPAC.
To test:
1) Log into staff side
2) Find OPACUserCSS syspref and add the following CSS:
th,
.table-bordered>thead>tr:first-child>th {
color: red;
}
3) Log into the OPAC
4) Go to your fines, your search history, your reading history etc -
notice all of these table's headings are styled with red text
5) Go to the detail page of an item, then the MARC view.
Notice this table's headings are now styled with red text
6) Apply patch and refresh page
7) Your holdings table should now have red headings.
(You can delete the CSS from OPACUserCSS if you'd like.)
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18184: Show frequency and numbering pattern info when viewing all subs attached to a biblio
To test:
1) Go to Serials, find a serial with more than one subscription
2) Click Serial collection
3) Notice how Frequency and Numbering pattern are filled out correctly
4) Click 'see any sub attached to this biblio'
5) Notice how Frequency and Numbering pattern are now missing info
6) Apply patch and refresh page
7) Confirm Frequency and Numbering pattern now show as expected
Sponsored-by: Catalyst IT Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 12 Sep 2017 16:03:04 +0000 (13:03 -0300)]
Bug 19298: Placing a hold from a list at the OPAC should respect issuing rules
The issuing rule retrieve to know if a hold can be placed on a record of
a list is not correct.
Test plan:
0/ With item-level_itypes = item level
1/ Define a item.itype=BK and biblioitems.itemtype=CF
2/ Create a default rule to allow on shelf holds
3/ Create a specific rule for CF with on shelf holds="If any
unavailable"
4/ Add this bibliographic record to a list and view the list
=> Without this patch you will not see "Place hold"
=> With this patch applied you will see the "Place hold" button,
respecting the correct issuing rule
Followed test plan, patches worked as described.
Note: Just to clarify the test plan slightly in step 4 where it says you will not see 'Place Hold' it means to
the left of the 'Save to another List' link below the item availability
in the opac-shelves.pl page. Not the 'Place hold' button in the grey
page header box.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To reproduce the problem you need switch on the two prefs
- OnSiteCheckouts
- OnSiteCheckoutsForce
Test plan:
Try to check an item out using an unknown barcode
With the 2 prefs set to on and without this patch, you will get the
following error in the log
Can't call method "materials" on an undefined value at
/home/vagrant/kohaclone/circ/circulation.pl line 387.
With this patch applied you should not get this error and a correct
behaviour for the different pref combinations.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Fri, 20 Oct 2017 14:49:38 +0000 (10:49 -0400)]
Bug 19495: Automatic report conversion needs to do global replace on 'biblioitems' and 'marcxml'
Bug 17898 provides a way of converting reports that use biblioitems.marcxml so that they will use biblio_metadata.metadata instead.
This only works with reports that do not refer to other columns in the biblioitems table. This is a known limitation. It means that we should be able to do a substitution of every occurrence of biblioitems with biblio_metadata, and every occurrence of marcxml with metadata.
Unfortunately, we're not doing a global replace, we're only replacing the first occurrence.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Reports/Guided.t
Jonathan Druart [Mon, 23 Oct 2017 19:59:11 +0000 (16:59 -0300)]
Bug 12768: Fix bad merge resolution conflict
RM note:
I have applied
https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=68427
on top of other patches that were already pushed.
But it was supposed to replace them, this change revert what was in
https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=68417
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
charles [Wed, 22 Apr 2015 19:54:04 +0000 (15:54 -0400)]
Bug 12768: Replacement cost and processing fee management
Signed-off-by: Eivin Giske Skaaren <eivin@sysmystic.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
charles [Wed, 22 Apr 2015 20:03:54 +0000 (16:03 -0400)]
Bug 12768: DB changes
Signed-off-by: Eivin Giske Skaaren <eivin@sysmystic.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Wed, 15 Feb 2017 16:24:57 +0000 (16:24 +0000)]
Bug 14826: Add offset for rental fees
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Thu, 21 Jul 2016 18:32:05 +0000 (18:32 +0000)]
Bug 14826: Unit Tests
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Tue, 12 Jul 2016 14:48:03 +0000 (14:48 +0000)]
Bug 14826: Resurrect account offsets table
The account offsets table should be used to track increments and
decrements of fines via payments and credits, as well as fine accruals.
It should be able to match fees to payments and visa versa, so we can
know which fee was paid by a given payment, and which payments applied
to a given fee.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Note the table accountoffsets has been renamed to account_offsets
4) Ensure fine generation creates offsets
5) Ensure creating a manual invoice creates an offset
6) Ensure a lost item charge creates an offset
7) Ensure Reverse Payment creates an offset
8) Ensure a payment creates an offset
9) Ensure a payment for multiple fees creates an offset for each
10) Ensure writeoffs create offsets
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Tue, 12 Jul 2016 14:13:04 +0000 (14:13 +0000)]
Bug 14826: Add Koha::Account::Offset(s) modules
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Tue, 12 Jul 2016 13:50:11 +0000 (13:50 +0000)]
Bug 14826: Update database
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Mon, 9 Jan 2017 16:31:19 +0000 (16:31 +0000)]
Bug 19356: Move staff client cart JavaScript to the footer
This patch modifies the staff client cart template so that
JavaScript is included in the footer instead of the header.
To test, apply the patch and test the JavaScript-driven features of the
cart: All button controls, DataTables functionality.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Correction for QA: Removed contditional around footer JS (from
copy-paste) because it will always be true.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Wed, 20 Sep 2017 13:21:27 +0000 (13:21 +0000)]
Bug 19348: Title column in item search is too narrow
This patch adds IDs to the item search results table header so that
columns can be targeted by CSS or JS. The CSS for the item search page
has been modified to give the title column a minimum width.
To test, apply the patch and clear your browser cache if necessary.
Perform an item search and confirm that the title column stays at a
reasonable width.
Signed-off-by: Dominic Pichette <dominic@inlibro.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Fri, 20 Oct 2017 06:11:38 +0000 (08:11 +0200)]
Bug 16187: (QA follow-up) Additional fixes
Fix:
Can't locate object method "next" via package "13" (perhaps you forgot to load "13"?) at misc/cronjobs/holds/cancel_unfilled_holds.pl line 119.
Undefined subroutine &main::CancelReserve called at misc/cronjobs/holds/cancel_unfilled_holds.pl line 143.
The script does not use Koha::Object's get_column correctly for getting
the branch codes.
The call to CancelReserve is obsolete. Was moved in the meantime to
Koha::Hold->cancel.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Thu, 14 Jul 2016 10:46:15 +0000 (06:46 -0400)]
Bug 16187: Add a script to cancel unfilled holds after a specified number of days
This script takes parameters:
days - how many days waiting to concal an unfilled hold on or after
library - (repeatable) branches to consider
holidays - whether or not to count holidays (default is no)
This patchset adds two methods and covers them with tests:
Koha::Holds->unfilled(); To return holds where found = undef
Koha::Hold->age( $use_calendar ); To return the number of days since a
hold was placed (including or excluding holidays)
To test:
1 - Place some holds with varying reservedates
2 - Run script with different parameters to verify options are respected
(-v for verbosity will assist here)
3 - verify that script does nothing without days parameter
Sponsored by:
Siskiyou County Library (http://www.siskiyoulibrary.info/)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 16187 - Followup
1 - Correct use of original (bad) script name
2 - Explain options better
3 - Remove change from 'W' to 'w'
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
RM note: Squashed for readability
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 10 Oct 2017 15:18:10 +0000 (12:18 -0300)]
Bug 18961: Use exact match for select filters on item search
The SQL operator LIKE is always used for filters when searching for
items.
If the filter is a select, we should search for an exact match.
That way we avoid problematic search like "%NFIC%" and "%FIC%" (one
includes the other one).
Test plan:
- Make sure you have collection codes 'Fiction' and 'Non-fiction'
- Do an item search
- Filter column 'Collection', select 'Fiction'
- Result: Column contains items from Fiction only
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
this file is working has expected with mysql tools.
but koha-create parsing will not find the db host resulting in
koha-conf.xml containing no values in hostname element.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 18 Oct 2017 16:59:56 +0000 (13:59 -0300)]
Bug 19487: Do not return an item if not checked out
To recreate:
1 - Manually add a lost fine to a ptron and include a barcode
2 - Attempt to write off the fine
3 - Internal server error
4 - Checkout an item and mark lost to checkin and fine
5 - Attempt to write off line
6 - Internal server error
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Tue, 12 Sep 2017 16:57:47 +0000 (16:57 +0000)]
Bug 19296: Allow all tax processing to happen in C4::Acquisition::populate_order_with_prices
To test:
1 - Create an order file that includes prices and items
(MarcFieldsToOrder)
2 - Stage the file
3 - Set vendor to 'prices exclude tax'
4 - Open a basket and add from the file
5 - View the items in the basket
6 - Prices are reduced by the tax rate and tax is calculated to return
prices to the value in the file
7 - Apply patch
8 - Repeat steps 1-6
9 - Prices should now calculate correctly
10 - Repeat with 'MarcItemFieldsToOrder'
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
projects / koha.git / log