Julian Maurice [Tue, 20 Jul 2021 12:45:35 +0000 (14:45 +0200)]
Bug 28723: Fix holds table display when a biblio has no title
Test plan:
1. Create a biblio without title, then create an item for this biblio.
2. Place a hold on it.
3. Go to the patron detail page and click on the Holds tab
4. Confirm that holds are correctly displayed
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 35874fa380707ba8eedda825e9cdc7ad47755958)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
== Test plan ==
1. Go to http://localhost:8081/cgi-bin/koha/patroncards/manage.pl?card_element=layout
2. See that the page title in your browser window title is wrong because it contains <span>
3. Go to http://localhost:8081/cgi-bin/koha/labels/label-manage.pl?label_element=batch
4. See that the page title in your browser window title is wrong because it contains <span>
5. Go to http://localhost:8081/cgi-bin/koha/admin/aqbudgetperiods.pl
6. Administration => Budgets => Click on a budget => planning => plan by months
7. See that the page title in your browser window title is wrong because it contains <span>
8. Refresh the pages and see that the titles are correct
9. Sign off :)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 44d6528b566e5c16eba9b15f8aa24667293766c3)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 28529: Make biblio-level hold itemtype count against max rules
The current situation is that biblio-level holds can be assigned an item
type, so they can only be fulfilled by items matching that specified
item type (be it item-level itype or the fallback to biblio-level).
But there's the situation in which max holds limits for a specific item
type can be overridden by using biblio-level holds with item type
selection (AllowHoldItemTypeSelection) enabled.
To test:
1. Have a patron of category 'Staff' (S)
2. Have 3 records with items with the 'BK' item type, and maybe others
3. Enable AllowHoldItemTypeSelection
4. Set a limit of 2 max holds for that category+item type
5. In the OPAC. Place bibio-level holds, with item type contraint to 'BK' on those 3 records
=> FAIL: You can place the 3 holds
6. Cancel the holds
7. Apply this patch and restart all
8. Repeat 5
=> SUCCESS: You can only place 2 holds
9. Run:
$ kshell t/db_dependent/Reserves.t
=> SUCCESS: Tests pass!
10. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 81bdce5c4390e1914ff6cfb2adb469027904f659)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ad14a8eee8a8f229518ee0d40c7d9c807f1c0937)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Thu, 12 May 2022 07:05:50 +0000 (07:05 +0000)]
Bug 30731: Remove Readonly::XS::MAGIC_COOKIE
This variable does not make sense anymore, since the Readonly::XS
module is not listed in the cpanfile. So it will not be required
the versions_info loop.
Test plan:
Run t/Installer_PerlModules.t again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 900aa4bf51b131c9f362cb647edf1bb0de2fbcc0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Wed, 11 May 2022 14:26:06 +0000 (14:26 +0000)]
Bug 30731: Silence noisy CPAN modules in C4::Installer::PerlModules
Main change is replacing 'no warnings' by local $SIG{__WARN__}.
The modules are sorted now too. This will make results of requiring
them one after the other a more predictable experience and improves
the output of koha_perl_deps.
Test plan:
Run about. Check plack intranet log.
Run koha_perl_deps.pl -a
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit da1115336bfab44eb9eebaae214c355fa19fc36d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Wed, 11 May 2022 14:35:18 +0000 (14:35 +0000)]
Bug 30731: Unit tests
Installer_pm.t can safely be discarded, having Installer_PerlModules.t.
Note: Without the second patch, the test about versions_info being silent
might fail. With the second patch, it should pass.
Note that since the order of requiring the cpan modules varies (without
the second patch), the results (potential warnings) vary too.
Test plan:
Run t/Installer_PerlModules.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2265739a378c1d31c5ea3d4beb07cbaa4d04e62b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 25 May 2022 08:04:58 +0000 (10:04 +0200)]
Bug 30842: 2FA - Allow at least one old TOTP
We allow one old token when we are setting the two-factor auth, we
should reuse the same settings when validation the authentication
itself.
Test plan:
Setup 2FA for your logged-in user
Logout/Login
Have a look at the code and wait for 30 sec before using it (< 1min
however)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f6110ce4170ced8ba246e295cc547c9794566ef1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
David Nind [Wed, 18 May 2022 02:21:14 +0000 (02:21 +0000)]
Bug 30786: Fix capitalization in advanced search system preferences
This fixes the capitalization in the descriptions for the
AdvancedSearchTypes and OpacAdvancedSearchTypes system preferences.
Test plan:
1. In the staff interface, search the system preferences for
'AdvancedSearch'.
2. Review the current descriptions for the AdvancedSearchTypes and
OpacAdvancedSearchTypes system preferences.
3. Note that "..Shelving Location.." is used instead of "..Shelving
location..".
4. Apply the patch.
5. Refresh the page.
6. Sentence case is now used for "Shelving location" in the
descriptions (as per coding guideline HTML4: Upper and lower cases
in strings).
7. Sign off.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 17b7ae56c539bfaaf2dae75f6855e9cda13ec904)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Katrin Fischer [Fri, 20 May 2022 08:05:43 +0000 (08:05 +0000)]
Bug 30788: Unit test
Run:
prove t/db_dependent/Circulation/CalcFine.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e59e2c4b8f58b267227bd5159e90a3ce015d0beb)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Katrin Fischer [Fri, 20 May 2022 07:43:15 +0000 (09:43 +0200)]
Bug 30788: Fix warning in Overdues.pm when fine is empty in circ rules
Argument "" isn't numeric in multiplication (*) at /usr/share/koha/lib/C4/Overdues.pm
To test:
* Create a issuing rule where fine is empty, but a fine interval is set.
Fine amount: empty
To do this, remove the 0 displayed in the input field before saving.
Fine charging interval: 5 or any other numeric value
When to charge: Start of interval
Fine grace period: 0
* Check out an item with the due date yester (use specify due date)
* Run misc/cronjobs/fines.pl -v
* You should see above warn in the output
* Apply patch
* Rerun fines.pl, there should be no warn.
* Run:
t/db_dependent/Circulation/CalcFine.t
t/db_dependent/Fines.t
t/db_dependent/Circulation.t
t/db_dependent/Overdues.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 368bdcf4e95e1cbb93f53f1d5dd976b98f59bf29)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Joonas Kylmälä [Sat, 21 May 2022 19:23:32 +0000 (19:23 +0000)]
Bug 30828: Remove useless 'type' parameter in placerequest.pl
To test:
1) Grep for placerequest.pl in the source code and check that
request.tt is the only place where the type parameter is passed.
Signed-off-by: David Nind <david@davidnind.com>
JD amended patch: adjust commit title Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 54a6c73c6d6e94554b7e4c15554e08d79e3eb578)
Owen Leonard [Tue, 17 May 2022 11:19:19 +0000 (11:19 +0000)]
Bug 30774: Typo: i %sEdit %sReserve %s
This patch removes an out of place "i" and replaces it with a space. The
patch also removes obsolete CDATA markers in the page's JavaScript.
To test, apply the patch and go to Course reserves.
- Create a course if necessary, then view the details of your course.
- Click the "Add reserves" button.
- Enter a barcode or biblionumber.
- On the next page, the heading "Reserve [title] for [course]" should
look correct, with no extra "i" at the beginning of the line.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 72dcf17ea0f23b0e23272231d39632bc5b57db73)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
David Nind [Sat, 28 May 2022 18:55:59 +0000 (18:55 +0000)]
Bug 30772: (follow-up) Age restriction message
Improve age restriction message.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit a614cb21268a21cb21f8aa59025bef5d5c1bb0d0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Owen Leonard [Tue, 17 May 2022 12:04:41 +0000 (12:04 +0000)]
Bug 30772: Terminology: Replace instances of "reserve" with "hold"
There were several templates where we were still using the term
"reserve" instead of "hold." This patch corrects the ones I found,
including in a couple of HTML comments.
To test, apply the patch and confirm that the changes look correct and
affect only the relevant term.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e68ecb3311eb34e8b1f12a98ccf51576c03f3307)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/selenium/regressions.t
=> FAIL: You see several
item-level_itypes set but no itemtype set for item (985) at /kohadevbox/koha/Koha/Schema/Result/Item.pm line 905.
2. Apply this patch
3. Repeat 1
=> SUCCESS: No more item type warnings
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 169c535e880bf1233622042cab76351b7dbc65ca)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Owen Leonard [Tue, 17 May 2022 12:30:28 +0000 (12:30 +0000)]
Bug 30761: Fix typos in OPAC reset password template
This patch corrects the word "PLease" to "Please." The patch also adds
some periods at the end of some alert strings to make punctuation
consistent between different alerts.
To test, an inspection of the patch is probably enough. The main fix
(the "PLease") only appears when an unknown error occurs.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d1f67e4287e888beb205c48a6769d967deb1777e)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch changes the word 'langues' to 'languages' in the description
of the following system preferences:
- OPACXSLTDetailsDisplay
- OPACXSLTListsDisplay
- OPACXSLTResultsDisplay
- XSLTDetailsDisplay
- XSLTListsDisplay
- XSLTResultsDisplay
To test:
1- Apply patch
2- Check the aforementioned system preferences and make sure the descriptions say 'languages'
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 58de13cb9a5efa3fd9c9fd50865eea62ee18ec5b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 30853: Add description for baskets in swagger.yaml
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b46396c0035a981f61fbd2c26e0dceb50de0566b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 14 Apr 2022 12:20:09 +0000 (12:20 +0000)]
Bug 30528: Process limits before handling CCL query
This patch moves the code that handles limit processing before that for CCL queries to ensure that special limit cases (branch, multibranch, etc) are handled before adding the limits to the query string
To test:
1 - Apply unit tests patch only
2 - prove -v t/db_dependent/Search.t
3 - It fails
4 - Apply this patch
5 - It passes!
6 - Test searching and confirm things work as epxected
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2da14cf8c10c2d5165220e6657b279b37aa02f81)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 14 Apr 2022 12:19:22 +0000 (12:19 +0000)]
Bug 30528: Unit tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit fde3aefba821c43554adaa53324c81cbe7d2d95a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Tue, 31 May 2022 09:29:57 +0000 (11:29 +0200)]
Bug 30870: Don't skip tests if Test::Deep if not installed
We are using Test::Deep in different tests, but from t/db_dependent/Koha.t the tests are skippted if the module is not installed.
We must assume the module is installed
Test plan:
prove t/db_dependent/Koha.t
should return green in ktd
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 42290cb43deb7dde668d9a55467c44ba705e665c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Tue, 31 May 2022 09:26:36 +0000 (11:26 +0200)]
Bug 29883: Add test
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 740258568368b7741df1a95d7bf330c527bf9054)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Petro Vashchuk [Fri, 14 Jan 2022 09:57:39 +0000 (11:57 +0200)]
Bug 29883: avoid uninitialized value warn in GetAuthorisedValues sub
GetAuthorisedValues is defined with optional parameter $category but it
is instantly interpolated without preventing "Use of uninitialized value
$category in concatenation (.) or string at .../C4/Koha.pm line 491."
warning.
As category param is optional, we can avoid throwing that warn as it is
something that can happen and is not an actual error:
C<$category> returns authorized values for just one category (optional).
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 44e126bcc7fae369e13c533eea79f00ef41f2ff1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
* Missing summary for routes
* Missing error_code description for 500
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3b431117e4e20e15f48cfa3c5dca5c228b96b4af)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 30854: Missing description for 'import_record_matches' in swagger.yaml
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 15f8d8f42b6f2bdd14d5488cda92ae69d4b4f3c2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 2 Jun 2022 17:24:21 +0000 (17:24 +0000)]
Bug 30892: (bug 30742 follow-up) Send single bib as a holdable bib
To test:
1. Try placing hold
2. Everything seems to work but no hold gets placed.
3. Apply patch
4. Verify holds are no placed correctly.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d37b9e6013ab2f1c3cb94e68dd75a2e5092fe5e4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 13 May 2022 15:23:30 +0000 (15:23 +0000)]
Bug 30742: Remove 'bad_bibs' and send a list of holdable bibs
Currently place request gets a list of bad_bibs that is created via javascript on the
template. It ignores this list
Ths patch instead doesn't add info for bad bibs, and provides a list of the bibs that
can be held
To test:
1 - Attempt multi hold with some items that can be held, and one that cannot due to notforloan
2 - Fill in pickup locations and place hold
3 - Note hold is place on bib with no avilable items and hsows twice in results
4 - Apply patch
5 - repeat with another patron
6 - Note no aidditonal hold on record with notforloan items
7 - Note with with not for loan items appears only once in results
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 503a7f0ab10b6689c2ac6e42f7f788d383575028)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 13 May 2022 14:01:48 +0000 (14:01 +0000)]
Bug 30742: Prevent placing holds on items/records where all items notforloan
This patch does a few things:
1 - Adds itemtype not for loan status to display
2 - Adds a conditional to display notforlaon status as the reason a hold cannot be placed
3 - Seperates the lower 'Place hold(s)' buttons for single and multi holds into two template sections
4 - Handles the case where all bibs in a multi hold have no items available
5 - Disables the button for single hlds when all items are unavailable
To test:
1 - Find or create a record with all items of itemtype marked 'notforloan'
2 - Attempt to place single hold on this record from staff client
3 - See one disab;ed button, one enabled 'Place holds' button
4 - Click 'Place holds' - hold placed
5 - Cancel hold
6 - Place multiple holds with some bibs that can be held, and this one that cannot
7 - Notice message that 'Cannot place hold on some items'
8 - Click 'Place holds' - hold is generated for the notforloan bib
9 - Apply patch
10 - Place single hold
11 - Note you now see not for loan status on items
12 - Note the red x also includes message abnout not for loan status
13 - Note the 'Place hold' button is disabled
14 - Attempt multi hold
15 - Message now includes "No items available: One or more records have no items that can be held"
16 - Click 'Place holds'
17 - Above still places the hold - this is for a followup patch
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 1c1c1e19f5529b5728ed7770a030feabf1a9b8df)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Mon, 23 May 2022 12:18:11 +0000 (12:18 +0000)]
Bug 30831: Unit test
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: minor typo fix
(cherry picked from commit f08951f044e2cdac7a9bdf4cdfb6897b9de9e1f2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Mon, 23 May 2022 12:25:53 +0000 (12:25 +0000)]
Bug 30830: Add Koha Objects for Koha Import Items
To test:
prove -v t/db_dependent/Koha/Import/Record/Items.t
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 6cd0249725f211f0df77ba367c379f0e5c5e1d4e)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3c0c375d8e073c9eb765179fa7b3c3d0136b5174)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Thu, 15 Apr 2021 10:12:23 +0000 (12:12 +0200)]
Bug 28152: Fix import_items row creation if duplicate barcode
We are trying to insert "duplicate item barcode" into import_items.itemnumber (integer),
it fails with "Incorrect integer value: 'duplicate item barcode' for column 'itemnumber' at row 1"
To reproduce:
Export a biblio with an item
Import it
=> The item is not added, and there is no new row in import_items.
The error only appears in the log if you comment the close STDERR and
close STDOUT lines
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c7a8a456c7dcc0bc2a015968f7a2c0e9ac2370f0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Mon, 10 Jan 2022 09:15:35 +0000 (10:15 +0100)]
Bug 29828: Prevent additional content to be created without default
When creating or editing an additional content, the form is submitted if
only the title of the 'default' tab is filled in.
We should submit the form only if both title and content exist.
Test plan:
Create a new content using text editor (codemirror)
Confirm that the form is submitted only if title and content from the
default tab are not empty
Try again with wysiwyg (tinymce)
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 05934b89b1b43ceb88928b48a4e1fd69708ac61b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Wed, 18 May 2022 14:12:11 +0000 (14:12 +0000)]
Bug 30747: Make column settings work for otherholdings table using forEach loop
To test:
1. Turn on SeparateHoldings and find a record that has some items at
different home libraries.
2. Look at the Other holdings(x) tab. Notice there is no Columns tool
(gear icon).
3. Go to Table Settings, try hiding columns from the otherholdings
table. You cannot.
4. Apply patch.
5. Now under the Other holdings(x) tab you should see the Columns
button, it should work.
6. Go back to Table settings and try hiding columns, it should work.
7. Now try uploading an item level cover image, make sure all columns
are still properly hidden and the Columns tool works
8. Try steps 6 & 7 but with the regular holdings table. Confirm that all
colums can properly hide.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Included a rename to table_name(s). Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Thu, 19 May 2022 14:52:21 +0000 (15:52 +0100)]
Bug 30730: (follow-up) Simplify query
This patch drops the 'fetch all non-loanable items' query used in the
subsequent query as part of the 'not_in' and instead replaces it with a
simple filter on 'notforloan => 0'
Test plan
Run the included unit tests before and apply applying the followup.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Shi Yao Wang [Tue, 17 May 2022 15:08:06 +0000 (11:08 -0400)]
Bug 30730: Holds to Pull should not list items with a notforloan status
Remove items with a notforloan value other than 0 because items that are
potentially holdable (with negative notforloan status) are not wanted in holds to pull.
Test plan:
1- Have a bib with 2 items, both holdable. Give one of these items a notforloan status with a negative value (like Ordered in the testing docker data).
2- Place a title-level hold on your bib
3- Confirm your bib is showing on Holds to Pull as expected, prompting staff to pull the item that does not have a not for loan status (correct!)
4- Take the item that does not have a not for loan status and check it out to a different patron, make sure not to fill or cancel your hold
5- Reload Holds to Pull, see your title is still listed and now Koha is directing staff to the item with a notforloan status
6- Apply the patch
7- Reload Holds to Pull, see your title with a notforloan status is gone
8- Run `prove t/db_dependent/Koha/Holds.t` and all tests should pass
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Wed, 11 May 2022 20:51:20 +0000 (10:51 -1000)]
Bug 30735: Fix filtering by patron attribute with AV in overdues report
In Circulation > Overdues, if there are seachable patron attributes
they can be used in left filters. Search does not work if this attribute
is linked to an authorized values category.
The problem is that AV code is compared to the AV desciption in :
if (grep { $attrval eq lc($_->[1]) } @{ $pattrs->{$code} }) {
Looking at a Data::Dumper of the var $pattrs you see for example :
$VAR1 = {
'ATT1' => [
[
'afr',
'Afrikaans'
]
]
};
First row is attribute code and second row is desciption.
It works for an attribute without AV because in this case
'avdescription' is undefined so code is stored as description :
push @{ $pattrs->{$row->{attrcode}} }, [
$row->{attrval},
defined $row->{avdescription} ? $row->{avdescription} : $row->{attrval},
];
This patch fixes the code and removes commented line.
Also reviews the SQL query :
- avcategory is useless
- use alias attrcode for borrower_attributes.code to be more explicit
Test plan :
1) Create a patron A with overdues
2) Go to Circulation > Overdues
3) Check you see the patron A
4) Create a patron attribute, searchable, with an authorized value
category, ie LANG
5) Edit patron A to set a value in this attribute
6) Go to Circulation > Overdues
7) Select attribute value and apply filter
8) Check you see the patron A
9) Redo test plan with a patron attribute, searchable, without an
authorized value category
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The basic MARC editor has its own button associated with each subfield
for emptying the contents of the input. Since the Flatpickr "X" icon
causes a layout problem and would be redundant, we can hide it on this page.
Alex Buckley [Wed, 18 May 2022 04:07:06 +0000 (04:07 +0000)]
Bug 30797: Add the calendar.inc include to addbiblio.tt
addbiblio.tt throws the '$(...).flatpickr is not a function' because it
is missing includes to flatpickr.min.js and shortcut-buttons-flatpickr.min.js
To fix this the addbiblio.tt should include the calendar.inc file (like
additem.tt does) which includes to those aforementioned JS files.
Test plan:
1. Edit a MARC bibliographic framework
2. Make the 902$d subfield visible in the Editor
3. Also set the 902$d subfield plugin='dateaccessioned.pl'
4. Catalogue a new biblio record
5. Notice the 902$d subfield has not been pre-populated with todays date
6. Right click, choose 'Inspect', observe this JS error in the console: "Uncaught
TypeError: $(...).flatpickr is not a function"
7. Apply patch, and restart services
8. Repeat steps 4-6 and this time observe the 902$d is pre-populated,
and there is no flatpickr JS error in the console
Sponsored-by: Chartered Accountants Australia and New Zealand Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Fri, 18 Mar 2022 15:03:30 +0000 (15:03 +0000)]
Bug 30009: Do not set MARCNOTES to empty list in list context
AMENDED:
We should not pass an empty list here, but just undef in order to
prevent creating a shift of elements in the hash.
To test:
1 - Find or create an invalid marc record
2 - View in staff client
3 - Note tab Descriptions(1) has no content
4 - Apply patch, reload
5 - No empty tab
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Fri, 6 May 2022 20:32:32 +0000 (20:32 +0000)]
Bug 30714: Do no log update to holdingbranch
When an item from another branch is checked in, the holdingbranch is
updated, and this change is logged. We record the checkin in
statistics, we do not need the cataloguing update logged
To recreate:
1 - Enable cataloguing log
2 - Check in an item with a different holding branch
3 - Check the action logs
4 - There is a cataloguing log for the holdingbranch update
5 - Apply patch
6 - Repeate with another item
7 - No log added!
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Joonas Kylmälä [Mon, 16 May 2022 18:56:05 +0000 (18:56 +0000)]
Bug 30776: import missing subroutine to fix import_webservice_batch.pl
Test plan:
1) Apply patch and notice the following error is gone:
$ perl misc/cronjobs/import_webservice_batch.pl
Undefined subroutine &main::GetStagedWebserviceBatches called at misc/cronjobs/import_webservice_batch.pl line 46.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Thu, 28 Apr 2022 11:37:31 +0000 (11:37 +0000)]
Bug 30640: Focus does not always move to correct search header form field
This patch updates the staff interface's global JavaScript to
accommodate changes in the way focus is being handled after the jQuery
upgrade (see: https://github.com/jquery/jquery/issues/4950).
The "focus" class is removed from search header include files so that
there isn't a contradiction between which form field has the focus class
and which form field is displayed in the active tab.
To test, apply the patch and view various pages in the staff interface.
- On pages where focus is not being directed to a form field within the
main content of the page, the form field in the active search header
tab should have focus on page load:
- Patron details
- System preferences
- Cities and towns
Also test pages where a tab other than the first one is preselected:
- Bibliographic details page
- Patron lists
On these pages, focus should move to the active tab's form field when
you switch tabs.
- On pages where focus is being sent to another form field, it should
work correctly:
- Patrons home page
- Check in
- Acquisitions home page
Katrin Fischer [Fri, 13 May 2022 10:25:27 +0000 (10:25 +0000)]
Bug 30720: Batch action links in result list missing permission checks
In the staff interface you can select records for merging, batch editing,
and batch deleting from the result list. This fixes the code to check for
the specific batch edit records and batch delete records permissions, so
those actions are only shown if the user has the right permissions.
As there is no merge record permission yet, it's assumed that edit_cataloge is
needed as before (no change in behavior).
To test:
- Create a staff user with only catalogue and editcatalogue permissions.
- Do a search in the catalog of the staff interface
- Select a few records from result list to unlock the Edit button on top
- Verify it shows all three options: edit, delete and merge
- Apply patch
- Verfiy now only merging is shown
- Add the records_batchdel and records_batchmod permissions from the tools
area one after another and verify the display changes accordingly.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Aleisha Amohia [Fri, 6 May 2022 03:33:59 +0000 (03:33 +0000)]
Bug 30701: Make Upload Tool buttons work on mobile-size screen
When the Upload tool is accessed on a smaller (mobile) screen (less than
768 pixels wide), the Upload and Browse buttons cannot be clicked. This
patch fixes that.
To test:
1) Go to Tools -> Upload
2) Make the screen narrower, either by opening your browser's Inspector
tool and using Responsive Design Mode, or by dragging in the edge of the
window to make it narrower.
3) Notice that when the screen becomes narrower than 768px, the sections
squash together and the padding between them is lost. Try to click on
the Browse and Upload buttons, notice you cannot.
4) Apply patch and refresh the Upload Tool
5) Ensure the screen is narrower than 768px. Confirm there is now
padding between the sections, and the buttons are clickable again.
Sponsored-by: Chartered Accountants Australia and New Zealand Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Thu, 12 May 2022 07:23:58 +0000 (21:23 -1000)]
Bug 30740: Link to authorities 'used in' should not use equal
When showing an authority, there is a link to search biblio records it is used in.
Actually this link uses 'q=an=$auth_id', this is wrong for an URL, and other places use 'idx:value'.
It does not break search with Zebra nor Elasticsearch but it is better to use ':'
Test plan :
Check changed links return same results with and without patch
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Fri, 14 Jan 2022 19:59:30 +0000 (19:59 +0000)]
Bug 29719: Do not clear onloan value when not passed in MARC
We blank the field to prevent users from setting it during import, but this has the
affect of blanking it in the DB.
This patch replaces the onloan field when not passed in to 'ModItemFromMARC' to preserve
the value
To test:
1 - Check an item out to a paron
2 - Export the item using Tools->Export data
3 - Stage the record for import
4 - Match on 999c and replace items
5 - Import the batch
6 - View the record and note item is checked out and Available
7 - In the DB note the onloan value is now null
8 - Check in the item
9 - Apply patch
10 - Repeat 1-5
11 - View the record and note item is checked out
12 - In the DB note the onloan value matches the due date
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Kyle Hall [Tue, 1 Mar 2022 16:49:49 +0000 (11:49 -0500)]
Bug 30207: Librarians with only "place_holds" permission can no longer update hold pickup locations
Bug 29540 increased the flags required to for modreserve.pl, but in doing so created a situation where a library can select a different pickup location for a hold, but upon clicking the "Update hold(s)" button, will be logged out due to having insufficient permissions for modreserve.pl.
Test Plan:
1) Create a librarian with "place_holds" permissions, but not "modify_holds_priority".
2) Place a hold for a patron
3) Attempt to change the pickup location from request.pl
4) Note you get logged out with a permissions error
5) Apply this patch
6) Restart all the things!
7) Attempt to change the pickup location from request.pl
8) This time it should succeed!
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In holds_reminder.pl, the script loops over all available branchcodes. For each iteration of the loop, if not using the calendar, the script subtracts the days parameter from the current date to get the waiting date threshold. The problem is that this method alters the DateTime object in $date_to_run, so for each iteration of the loop, the waiting date becomes farther and farther in the past, when it should always be the same!
The solution is to either clone the "date to run" for each call to subtract, or to move it out of the loop since it doesn't need to be recalculated each time.
Test Plan:
1) Become the koha user using koha-shell
2) Run DBIC_TRACE=1 misc/cronjobs/holds/holds_reminder.pl --days 7
3) Note in the queries that for each loop, the waiting date is different
4) Apply this patch
5) Run the command in step 2 again
6) Note the queries all now have the same waiting date threshold!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Kyle Hall [Tue, 3 May 2022 10:53:43 +0000 (06:53 -0400)]
Bug 30667: Holds reminder cronjob (holds_reminder.pl) never uses default letter template
Bug 28514 changed the way holds_reminder.pl searches for templates, using a direct search for letters,
but should be using find_effective_template instead. Now, if a branch specific template does not exist,
it will skip that branch.
Test Plan:
1) Ensure you only have the default HOLD_REMINDER template
2) Become the koha user using koha-shell
3) Run misc/cronjobs/holds/holds_reminder.pl --days 7 -v
4) Note that the script skips every branch
5) Apply this patch
6) Run the command in step 3 again
7) Note the script doesn't skip over any branches
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Thu, 31 Mar 2022 15:51:14 +0000 (15:51 +0000)]
Bug 30422: Authorities editor update broke the feature added by Bug 20154
This patch corrects JavaScript in authorities templates so that
clicking "Edit" on the authority detail page will take you to the
authority edit page while keeping the same tab open.
This patch also corrects the JavaScript which should have been
automatically moving the cursor focus to the first form field when
switching tabs in the editor.
This patch also adds the "Section" headings which are present in the
basic cataloging editor but were not added here at the time of the
page's tabs revision.
To test, apply the patch and locate an authority record in your catalog.
- Without changing tabs, choose "Edit record" from the "Edit" dropdown
menu."
- The authorities editor should load and display the "Section 0" tab.
- Return to the authority detail page and select a tab besides tab 0.
- Click back to tab 0. Editing the record at this point should open the
editor to Section 0.
- Return to the authority detail page.
- Click any of the numbered tabs besides tab 0.
- Choose "Edit record" from the "Edit" dropdown menu.
- When the authorities edit page loads the same tab should be
preselected.
- Test that when you switch tabs in the authority editor the cursor
focus is automatically moved to the first visible input.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Shi Yao Wang [Tue, 10 May 2022 17:34:15 +0000 (13:34 -0400)]
Bug 30139: Fix javascript moneyFormat to be compatible with FR format
New way of formatting money amount to make it work with FR format
Test plan:
1- Set CurrencyFormat pref to FR
2- Activate Point of sale and cash register features
3- Add cash register
4- Add debit type that 'can be sold' with a price of 10.00
5- Go to point of sale, click on the item to purchase
6- Verify the Amount to be paid shows the wrong amount and can't be fixed on the interface
7- Apply the patch
8- Refresh the page and do step 5 again
9- Notice it now shows the right amount
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Mon, 9 May 2022 08:28:51 +0000 (10:28 +0200)]
Bug 30717: Format dates when editing items
This is a result of bug 29369 and bug 27526.
Bug 29369 removed the format of the dates, and bug 27526 assumed that it
was the correct behaviour.
Here we don't want to let the controller know which fields is a date, or
we will have to access the subfield structure to know which subfields
have the "date cataloguing plugin".
This patch suggests to use the altFormat options from flatpickr that
will "Show the user a readable date (as per altFormat), but return
something totally different to the server."
It's actually an option we want to use for all our dates, that will
reduce a lot the overhead in our controllers.
Test plan:
Edit items (additem.pl and in batch) and confirm that the subfields
using the dateaccessioned plugin are displayed according to the
dateformat syspref. Make sure the date is stored correctly.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Mon, 9 May 2022 15:22:16 +0000 (15:22 +0000)]
Bug 30721: Markup error in detail page's component parts tab
This patch adds a missing </div> to the bibliographic detail
page template in the section for showing component parts.
Some comments are added to clarify the markup structure.
To test you should have a record in your catalog with component
parts. Bug 11175 provides one you can import if necessary:
https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=78023
To see the error, go to the staff interface, locate the record
in question and view the detail page. Under the Components tag,
scroll to the bottom. You will see content from "later" tabs at
the bottom, e.g. "There is no order for this bibliographic record"
or "No images have been uploaded for this bibliograhpic record yet."
Apply the patch and reload the page. The tabs should still look
correct, and now the tab content should be correctly isolated.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Thu, 5 May 2022 11:13:08 +0000 (11:13 +0000)]
Bug 30689: Incorrect Babeltheque setting can cause console warning
This patch adds an additional system preference check to the part of the
OPAC bibliographic detail template which conditionally loads Babelthèque
JavaScript. The script tag should not be output if there is no
Babeltheque_url_js setting to use.
To test, apply the patch and search for "Babeltheque" in system
preferences.
- Set "Babeltheque" to "Do" include information.
- Enter a path in the "Babeltheque_url_js" preference, e.g.
"https://www.example.com/example.js" It doesn't have to be a valid
Babeltheque URL.
- In the OPAC, view the bibliographic detail page for any title. If you
used a dummy URL for the js preference you should see an error in the
console about the file not being found. This confirms that the
template logic is working. If you used a working Babeltheque URL then
the corresponding content should load.
- Return to system preferences and remove the URL from the
"Babeltheque_url_js" preference.
- Return to the bibliographic detail page in the OPAC and confirm that
there is no warning in the console about "'src' attribute of <script>
element is empty."
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 30728: Make RealTimeHoldsQueue disabled by default
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 30728: Only trigger real-time holds queue update if enabled
This patch makes the places in which Koha enqueues holds queue for
real time updates verify the feature is enabled.
To test:
1. Apply this patches up to the unit tests
2. Run:
$ updatedatabase
$ kshell
k$ git diff origin/master --name-only | grep -e '\.t$' | xargs prove
=> FAIL: tests fail, the code doesn't care about the syspref
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Be happy!
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 30727: Avoid holds queue updates multiple times on BatchDeleteBiblio
This patch makes the background job only enqueue holds queue updates
once per biblio, when appropriate.
To test:
1. Apply the regression tests patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/BackgroundJobs/BatchDeleteBiblio.t
=> FAIL: It enqueues 3 times for a bib!
3. Apply this patch
4. Repeat 2
=> SUCCESS: It only enqueues once!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Now that we've remove the last of the translated .sql files, we can just
drop this test entirely.. translation is now handled on pootle for all
languages. Woopie! :)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Fri, 6 May 2022 11:19:36 +0000 (12:19 +0100)]
Bug 30695: (QA follow-up) Catch moremember.tt too
This patch does the same treatment for moremember.tt where the same
summary block is includes. We also correct the tab order to be a little
more consistent too.
We should really move this to an include and refer to it from both
templates instead of this copy/paste code..
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 30127: By default show pending suggestions tab
Pending suggestions are the most important ones in links pointing to suggestions.
This tab should be the default one, like did Bug 7875
Changing order in perl code seems really difficult because it is a
generic code using GetDistinctValues()
Test plan :
1) Create some suggetions, accept some of them
2) In staff interface, click on 'More > Suggestions'
=> You see pending tab selected
3) In left menu, click on 'Suggestions' under 'Late orders'
=> You see pending tab selected
4) In left menu, use a filter, then click on '[clear]'
=> You see pending tab selected
5) Create a suggestion, click on 'cancel'
=> You see pending tab selected
6) Create a suggestion, click on 'Suggestions' in breadcrumbs
=> You see pending tab selected
7) Edit an existing suggestion, click on '<< Back to suggestions'
=> You see pending tab selected
8) Create a suggestion, click on 'Submit your suggestion'
=> You see pending tab selected
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Mon, 9 May 2022 07:42:30 +0000 (09:42 +0200)]
Bug 30603: Fix other occurrences
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Mon, 9 May 2022 07:28:04 +0000 (09:28 +0200)]
Bug 30603: Display Sort1 and Sort2 as free text if no AV exists
Test plan:
Don't define AV for Sort1 and Sort2, edit a patron
=> Should be editable via an input box
Define AVs for Sort1 and Sort2, edit a patron
=> Should see the dropdown
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Fri, 6 May 2022 14:45:13 +0000 (14:45 +0000)]
Bug 30710: Build holds queue once per biblio when batch deleting items
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
projects / koha.git / log