Martin Renvoize [Mon, 8 Jan 2024 17:34:09 +0000 (17:34 +0000)]
Bug 35100: Revert change to request_transfer
This patch reverts the change to request_transfer, opting to tackle the
StockRotationAdvance requirement to stay in place in ModItemTransfer
itself.
We also add a FIXME to RotatingCollections.. I'll look to removing that
on another bug to reduce the scope of this one.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Fri, 5 Jan 2024 16:08:44 +0000 (16:08 +0000)]
Bug 35100: Various fixes
1) Don't automagically always set a transfer to in transit on checkin..
wait for the user to actually confirm that's the case
2) New transfers triggered by a hold should take precidence, so hide
transfers for any other reason from display
3) Update get_transfer and get_transfers to ensure ordering isn't lost
when prefetch is used and add tests for this
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Thu, 4 Jan 2024 12:00:13 +0000 (12:00 +0000)]
Bug 35100: Prevent StockrotationAdvance transfers from being cancelled
ModItemTransfer is still very heavy handed and outright overrules
existing transfers in the queue.
For StockrotationAdvance transfers it's important that they remain in
the queue to get actioned later, even if a higher precident transfer is
actions in the interim.
This patch adds a clause to the cancellation call within
request_transfer such that StockrationAdvance transfers are left in tact
for the next time the item is checked in.
Test plan
1) Item is added to stock rotation
2) The cronjob creates a 'StockRotationAdvance' transfer
3) The item is checked in, which initiates the transfer, however, a hold is triggered
4) The hold is confirmed, which replaces the StockRotationAdvance
5) The item is checked out
6) The item is checked in, which initiates the transfer again
7) The item is checked in at it's destination and the StockrotationAdvance transfer
has the proper date arrived date set.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Thu, 4 Jan 2024 12:09:47 +0000 (12:09 +0000)]
Bug 35100: Unit tests
This patch adds a unit test to ensure StockrotationAdvance transfers are
not cancelled from request_transfer when called with 'replace'.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Paul Derscheid [Tue, 17 Sep 2024 10:59:26 +0000 (10:59 +0000)]
Bug 37812: Improve consistency of modal styling in Dialog.vue
- Use modal-header for content, modal-footer for acknowledgement in alert type modal.
- Conditionally render modal-body if message or inputs available.
- Use modal footer for interactions and hide top border if body wasn't rendered.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Fri, 30 Aug 2024 12:47:07 +0000 (12:47 +0000)]
Bug 37775: Remove delayed commits from update_totalissues.pl and add progress option
This patch removes setting AutoCommit to 0 and commiting only every X records.
Instead we commit as we go and report progress using a parameter.
Bug 36474 reduced the numebr of changes that are being committed, so this should be a reasonable change. The
use of commits without transactions was causing problems if the library was active while the script ran.
To test:
1 - perl misc/cronjobs/update_totalissues.pl -c
2 - Script runs, but with unknown parameter
3 - perl misc/cronjobs/update_totalissues.pl -p 10
4 - Script runs and reports every 10 records
5 - per; misc/cronjobs/update_totalissues.pl
6 - Script runs and reports every 100 records by default
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Mon, 1 Apr 2024 15:00:34 +0000 (15:00 +0000)]
Bug 36474: Don't update records when total issues has not changed
This patch adds a new check in UpdateTotalIssues to check that we are changing the number
of total issues before calling ModBiblio
To test:
0 - Enable CataloguingLog
1 - Checkout an item
2 - Run : misc/cronjobs/update_totalissues.pl --use-stats --commit=1000 -v
3 - In report, note all biblios were updated
4 - Check action_logs - note a new entry for every biblio
5 - Apply patch
6 - Repeat
7 - Note no biblios reported updated
8 - Note no new cataloguing log entries
9 - Checkout the item again
10 - Run again
11 - Note biblionumber has updated count in verbose output
12 - Note report only rpeort 1 biblio modified, the rest only processed
13 - Only one line added to action_logs
14 - Run it again
15 - Confirm no updates
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Wed, 18 Sep 2024 03:59:27 +0000 (04:59 +0100)]
Bug 37592: (QA follow-up) Fetch database fields for api return
Creation and Modification times are maintained by the database, but on
add/update we were not fetching the updated fields from the database for
the api response.
This patch corrects that and also updates the api schema to reflect that
these are readOnly fields.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Mon, 9 Sep 2024 09:06:37 +0000 (11:06 +0200)]
Bug 37857: Add callnumber and geo_point for new search fields
It is missing "Geo point" and "Call Number" from the options of
"Type" when creating a new search field.
Test plan:
Go to the elastic mapping config page, bottom of the page.
Notice that after this patch you see the 2 options in the dropdown list.
Signed-off-by: Chloe Zermatten <chloe.zermatten@ptfs-europe.com> Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Thu, 12 Sep 2024 22:39:46 +0000 (15:39 -0700)]
Bug 37914: Forms for budget planning filters and export should GET rather than POST
Because of the bug 36192 CSRF protection, we intend not to have forms that
POST without a param named 'op' with a value starting with 'cud-'. Because
of bug 37728, a few were missed, including the 'Filters' form that lets you
switch between planning budgets by month or by itemtype or by library, and
the 'Export' form that lets you save your planning as a .csv file. Neither
one has any need to POST, they can just be the GET they naturally are.
Alas, the default data won't let you exercise everything, so there's a lot of
setup before the actual testing.
Test plan:
1. Patrons - search for Acevedo - More-> Set permissions - check
Acquisitions management and Save
2. Administration - Authorized values - Asort1 - New authorized value for
Asort1 - value Q1, description First Quarter, then repeat for Q2, Q3, Q4
3. Administration - Budgets - New budget - give it a start date of today,
end date of a year from today, a description, a total amount of
100000.00, for Statistic 1 done on choose Asort1
4. Click the name of your new budget - New-> New fund for (name) - give it
the code my, name My money, amount 75000.00 and Submit
5. New-> New fund for (name) - give it the code his, name Henry's money,
amount 25000.00, and click Select owner, find Henry and Select, then
Submit
6. Acquisitions - click Search on an empty search box to find the only
vendor - New-> Basket - Give it a name and Save
7. Add to basket - From an existing record (search for something like Perl)
click any bib record - Add order - set the required item type and click
Add item
8. Scroll down to the Accounting details form, change Fund to My money, and
enter 20.00 for the Vendor price and click Save. You just made that
fund "active" in the eyes of the Filter form, by spending some of it.
9. Finally set up. Administration - Budgets - click the name of your budget
10. Planning-> Plan by months
11. In the upper left Filter box, check Show my funds only and Submit - you
should see Henry's money disappear
12. Uncheck Show my funds only and check Show active funds only and Submit -
you should see Henry's money disappear
13. Check Show actual/estimated values and Submit, you should see text for
the actual (only in this month, since that's all you spent) and wee
little shrunken text boxes for the planning numbers
14. Uncheck all the boxes and change the dropdown from by months to by Asort1
(either one of it, there being two is bug 34159) and Submit, you should
have four columns for Q1 - Q4 and only for My money, since Henry doesn't
use Asort1
15. Click the Auto-fill row button, and Save
16. In the Export form (which isn't much of a form, since you only have a
choice for the filename) click Submit
17. You should have downloaded a .csv file, and if you open it it should
have the info from your current planning form.
18. Apply patch, restart_all
19. Repeat steps 9-17, getting the same results you did without the patch
Sponsored-by: Chetco Community Public Library Signed-off-by: Sukhmandeep Benipal <sukhmandeep.benipal@inLibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Wed, 11 Sep 2024 03:17:20 +0000 (20:17 -0700)]
Bug 37887: OPAC password recovery needs to use a cud- op while POSTing new password
To pass xt/find-missing-op-in-forms.t after bug 37728 updates it to notice
that there can be more than one form in a template, opac-password-recovery.tt
needs to have a param named 'op' which starts with 'cud-' for the form that
POSTs the new password.
Luckily, testing this doesn't require that you set Koha up to actually send
email (though you can), because you can get the link to reset the password
by looking at the list of notices sent to the patron in the staff interface:
the failure to send notice works just fine.
Test plan:
1. There's no behavior change to test, you just need to see that resetting
the password still works, so start with the patch applied.
2. Administration - System preferences - change OpacResetPassword to allowed
3. Set a patron so you can use them, which requires that you know the
username, and they have an email address. I give Acosta, Edna one of
my email addresses, and copy her cardnumber.
4. Open the OPAC, and below the login form click the "Forgot your password?"
link
5. Enter the cardnumber for Login and the email you used for Email and
click Submit. If you didn't set up sending email, you'll get an error
message, but ignore it, not a problem
6. Back in the staff interface, check out to the patron you are using, and
on the left sidebar choose Notices and find the Koha password recovery
notice and click that linked phrase
7. In the popup with the notice text, open the recovery link in a new tab
8. Following the instructions for the content of a new password, enter one
in both fields and click Submit
9 In the success message, click the link to Log in to your account and
log in with the new password
Sponsored-by: Chetco Community Public Library Signed-off-by: Olivier V <olivier.vezina@inLibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Thu, 29 Aug 2024 22:31:50 +0000 (15:31 -0700)]
Bug 37769: Fix forms that POST without an op in currency administration
We intend not to have forms with method="post" without an op variable (so we
can check that the op starts with "cud-" as part of the CSRF protection), but
because of bug 37728 some were missed.
This patch changes the form around the OK button when you are told you can't
delete a currency which is in use, and the No, do not delete button when you
could delete a currency and decide not to, from a POST to a GET because all
they need to do is show the list of currencies again.
The only visible change from the patch is that the URL will end with a "?"
from having done a GET without any params. Someone who wants to decide
which of our link-as-cancel-button styles to use is welcome to switch them
to links, in a bug not blocking an RM_priority bug.
Test plan:
1. No changes to see, so apply the patch first
2. Administration - Currencies and exchange rates
3. You need one currency in use and one not in use. Luckily, ktd gave you
USD for in use, and GBP for not in use. For USD, click the Deleete button
4. On the page telling you that you can't delete it because it's in use,
click the OK button and verify that you are back at the list of currencies
5. Click the Delete button for GBP, then the No, do not delete button
6. Verify that you are back at the list of currencies
Sponsored-by: Chetco Community Public Library Signed-off-by: Sukhmandeep Benipal <sukhmandeep.benipal@inLibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Fri, 30 Aug 2024 00:34:36 +0000 (17:34 -0700)]
Bug 37767: Fix forms that POST without an op in Authority types
We intend not to have forms with method="post" without an op variable (so we
can check that the op starts with "cud-" as part of the CSRF protection), but
because of bug 37728 some were missed.
In Authority types, that's dead code in the template that expects to show a
"Data deleted" confirmation page, but it never shows because rather than
setting the variable delete_confirmed and outputting the template, the op
cud-delete_confirmed just does a print $input->redirect() and exits, and, the
search for tags form that should be a GET so it can be bookmarked and linked
to.
Test plan:
1. Without the patch, Administration - Authority types - choose one other
than default, so you can see the code rather than "" in the URL -
Actions - MARC structure
2. For any tag (you *are* testing in a throwaway database, right?) click
Actions - Delete then Yes, delete
3. Note that you don't get a confirmation page, just redirected back to a
search for your tag which no longer exists, with the searchfield and
authtypecode nicely in the URL
4. Click the Search button for the Search for tag form, without changing
anything
5. Note that your URL lost the searchfield and authtypecode
6. Apply patch, restart_all
7. Repeat steps 1, 2, and 3, with identical results like they should be
8. Repeat step 4, but this time note that the searchfield and authtypecode
stay in the URL.
9. Change the select menu for In framework and click Search, note that
the searchfield and frameworkcode are still in the URL and still correct
and that the correct results show
10. Change the tag number and hit Enter, and verify that the URL and the
page show the correct results
Sponsored-by: Chetco Community Public Library Signed-off-by: Sukhmandeep Benipal <sukhmandeep.benipal@inLibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Matt Blenkinsop [Mon, 16 Sep 2024 11:00:44 +0000 (11:00 +0000)]
Bug 37929: Remove it.only from Agreements_spec
Test plan:
1) Run the cypress tests for Agreements_spec.ts
yarn cypress run --spec t/cypress/integration/ERM/Agreements_spec.ts
2) Only the Delete test will run
3) Apply patch and yarn build
4) Run test again, all tests should run
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Paul Derscheid [Mon, 16 Sep 2024 16:25:36 +0000 (16:25 +0000)]
Bug 37824: (QA follow-up) Fix improper handling of jQuery and DataTables libraries by marking them as externals
This commit addresses an issue where jQuery and DataTables libraries (datatables.net and related extensions) were not functioning correctly when bundled with rspack. These libraries expect to be loaded in the global scope rather than as bundled modules, leading to initialization issues.
To resolve this, jQuery and all related DataTables libraries (datatables.net, datatables.net-buttons, datatables.net-buttons/js/buttons.html5, etc.) are marked as externals in the rspack configuration. This ensures they are treated as global dependencies, preventing conflicts and allowing proper initialization.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Martin Renvoize [Thu, 12 Sep 2024 10:49:53 +0000 (11:49 +0100)]
Bug 37592: (QA follow-up) Add API mapping and definition
Sticking to API guidelines, this adds the creation_date and
modification_date fields to the api definitions and the required
to_api_mappings for those fields to be properly populated.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Paul Derscheid [Wed, 7 Aug 2024 15:25:25 +0000 (15:25 +0000)]
Bug 37592: Add created_at, updated_at fields to bookings table
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Fri, 13 Sep 2024 00:32:23 +0000 (17:32 -0700)]
Bug 34159: Budget planning shouldn't add every authorized value starting with A
In aqplan.pl there are two different sets of params for things you can plan
by: for the toolbar "Planning" menubutton the script looks up what AVs are
used for "Statistic 1|2 done on" for the budget's fund(s), and passes them to
the template which knows to hardcode the MONTHS, ITEMTYPES, and BRANCHES
choices, but for "Select planning type" in the Filter sidebar box, the
script inserts the harcoded ones itself, adds in the ones used by a fund,
and for no apparent reason adds in every authorized value category that starts
with the letter A and has at least one value. Those things do not actually
work, because for things other than the hardcoded ones the script checks
whether they are in a fund's "Statistic 1|2" and if not refuses to let you
plan by them.
Test plan:
1. Administration - Budgets
2. If you don't have a budget, create one and add a fund to it,
but with the default data click the name Main budget
3. In the row for Main fund, click Actions->Edit
4. For Statistic 1 done on choose an authorized value which does not start
with A, like BOR_NOTES, and Save
5. In the top toolbar, Planning->Plan by months
6. In the sidebar Filter box, note that there is an option to plan by
AR_CANCELLATION even though you didn't select that for Statistic 1
7. Select the by BOR_NOTE choice and Submit
8. Note that you now only see Main fund, because that's the only one
which uses that AV
9. Select the by months choice and Submit, see that it changes back, then
select the by AR_CANCELLATION choice and see that nothing is displayed,
select the by months choice again and Submit, see that the display is
now completely broken
9. Apply patch, restart_all, reload the page
10. Note that the AR_CANCELLATION choice is gone, and all the choices
you do have work correctly
Sponsored-by: Chetco Community Public Library Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Thu, 11 Apr 2024 10:25:21 +0000 (10:25 +0000)]
Bug 26933: Improve handling of multiple covers on catalog search results in the OPAC
This patch implements a book cover slider widget for cover images in
OPAC search results, matching the way we show covers on the detail page.
To test, apply the page and rebuild the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
Enable multiple cover image services. The patch was developed with these
services available:
- Amazon
- Local cover images
- Coce (serving up Amazon, Google, and OpenLibrary images)
- OpenLibrary
- Baker & Taylor
- Google
- Custom cover images (the CustomCoverImages preference)
Perform a variet of searches and confirm that cover images are
displaying correctly, whether there be 0, 1, 2, or more covers
available for each.
Sponsored-by: Athens County Public Libraries Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This subroutine can easily be replaced and is not really needed.
Test plan:
No changes expected, try to suspend/resume holds from the OPAC
Note that you cannot affect somebody's else holds.
Note for QA: The extra fetch of Koha::Hold will be removed on bug 37868.
Signed-off-by: Olivier V <olivier.vezina@inLibro.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Paul Derscheid [Tue, 3 Sep 2024 15:35:16 +0000 (17:35 +0200)]
Bug 37824: Replace webpack with rspack for fun and profit
I left the webpack.config.js as well as the devDependencies in place for now.
We can remove them in a follow-up patch on this bug after testing it out.
To test:
1) Run js:build and js:build:prod
2) Note the build time
3) Apply patch
4) Run yarn install
5) Run js:build and js:build:prod again
6) Note the much faster build time
7) Extra credit: take a look at the ERM or preservations module and make sure everything works as expected.
8) Extra credit: run the cypress tests.
9) Sign off or give your opinion
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Looks faster to me. Where webpack failed for me (Killed, error 137), this passed. Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 37480: Make addroutingmember use Koha::Subscription::Routinglists
This patch rewriteis the method so it relies on Koha::Object-based
classes instead of the old way.
To test:
1. Run:
$ ktd --shell
k$ prove t/db_dependent/Serials.t
=> SUCCESS: Tests pass!
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass!
4. Run:
$ git grep addroutingmember
=> SUCCESS: It is only called on a single .pl file which doesn't care
about the return value. Neither the tests care.
5. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 37380: Replace uses of GetMarcControlnumber for get_control_number()
Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 37380: Add get_control_number() to the metadata extractor
This simple patch implements C4::Biblio::GetMarcControlnumber in the
right spot on the Koha::* namespace.
To test:
1. Apply this patches
2. Run:
$ ktd --shell
k$ prove t/db_dependent/Koha/Biblio/Metadata/Extractor/MARC.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 37781: Add translation context for "On" (when used alone)
This patch adds context to the string "On" used alone in the item search
page, to mean "On a specific date".
To test:
1. Update translation files
gulp po:update --lang fr-CA
2. Check the staff-prog.po file and search for "On".
vi misc/translator/po/fr-CA-staff-prog.po
/"On"
--> It should be in three places, two in itemsearch.tt and
one in smtp_servers.tt
#. For the first occurrence,
#. SCRIPT
#: koha-tmpl/intranet-tmpl/prog/en/modules/admin/smtp_servers.tt:327
#: koha-tmpl/intranet-tmpl/prog/en/modules/catalogue/itemsearch.tt:322
#: koha-tmpl/intranet-tmpl/prog/en/modules/catalogue/itemsearch.tt:324
#, c-format
msgid "On"
msgstr "Sur "
3. Apply patch
4. Reupdate po files
gulp po:update --lang fr-CA
5. Check the misc/translator/po/fr-CA-messages.po file and search for "On"
--> There should be a msgctxt line that adds context to the
"On" (please ignore the translated msgstr, I have no idea
how it decides what to put in there!)
6. Also check the item search page
--> It should still work and the "On" in the last borrowed date
drop-down should still say "On"
7. In the SMTP servers page, add a server and enable the "Debug" mode.
--> In the list of servers, the Debug column should still say simply
"On"
8. Optionally, translate the string and remove the "#fuzzy" line,
install the translation and check the item search page
--> It should use the string you put in
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Tue, 31 Oct 2023 08:00:11 +0000 (09:00 +0100)]
Bug 35191: Make entries per page configurable for items table on staff detail page
The new API driven items view defaults to 20 per page. This is a bit low, it would be great if it could be configurable to a higher value per the table configuration.
Test plan:
1. Apply this patch
2. restart_all (memcached restart is required)
3. Go to Administration > Table settings
4. Catalogue > holdings_table | otherholdings_table
=> Notice the new "Default display length"
5. Select something else than 20
6. Go to the detail page of a record with lot of records
=> Notice that the default value defined in the settings is used.
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Thu, 5 Sep 2024 10:47:53 +0000 (12:47 +0200)]
Bug 17729: Replace IsItemOnHoldAndFound
This subroutine can easily be replaced with
$item->holds->filter_by_found->count \o/
Test plan:
Confirm that the old sub and $item->holds->filter_by_found->count
produce the same query
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Tue, 23 Apr 2024 09:19:22 +0000 (11:19 +0200)]
Bug 34608: Display dropdown list if linked with AV cat
If at least one AV exists for bsort1 we will show a dropdown list in
the column filter for bsort1. Same for bsort2.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Wed, 1 Nov 2023 17:19:09 +0000 (17:19 +0000)]
Bug 34608: (follow-up) Display authorized values if used
This patch shamelessly steals from Bug 33568 in order to allow the
correct authorized value description to be shown in the JS-generated
table of results for values of borrowers sort1 and sort2.
To test, apply the patch and go to Administration -> Authorized values.
- Add some values, if necessary, to both the 'Bsort1' and 'Bsort2'
categories.
- Locate some patron records to edit, and set the patron's "Sort 1" and
"Sort 2" fields.
- Perform a patron search which will return those patron records.
- Confirm that the correct authorized value description is shown
instead of the authorized value code.
- Delete all values from the 'Bsort1' and 'Bsort2' authorized value
categories.
- Return to your patron search and confirm that "Sort 1" and "Sort 2"
values are still being shown, though now it's the "raw" code.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Thu, 24 Aug 2023 10:57:37 +0000 (10:57 +0000)]
Bug 34608: Add sort1 and sort2 to patron search results
This patch adds the option of displaying patron "sort1" and
"sort2" statistical fields in the patron module's main search
results. The fields are hidden by default in the updated table
configuration.
To test, apply the patch and restart services.
- Go to Patrons and perform a search.
- You should not see columns for sort1 and sort2.
- Under the "Columns" button you should see options to display sort1 and
sort2. Confirm that they work to show and hide the columns.
- Confirm that the sort1 and sort2 columns are sortable and searchable.
- Go to Administration -> Table settings.
- Under Patrons -> member, toggle the sort1 and sort1 "hidden by
default" checkboxes and save the configuration.
- Return to patron search results to confirm that the columns are now
shown by default.
Signed-off-by: Émily-Rose Francoeur <emily-rose.francoeur@inLibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
David Cook [Wed, 14 Aug 2024 00:41:46 +0000 (00:41 +0000)]
Bug 31161: Mark hidden records as deleted
If a bib record is hidden by OpacHiddenItems,
mark it as deleted in the OAI-PMH, so that it's metadata
is not consumed in a new OAI-PMH harvest, and it's marked
for removal if the metadata was consumed in previous harvested.
Test plan:
0. Setup
vi /etc/koha/sites/kohadev/oai.conf
format:
marcxml:
metadataPrefix: marcxml
metadataNamespace: http://www.loc.gov/MARC21/slim http://www.loc.gov/standards/marcxml/schema/MARC21slim
schema: http://www.loc.gov/MARC21/slim http://www.loc.gov/standards/marcxml/schema/MARC21slim.xsd
include_items: 1
Set sysprefs:
OAI-PMH: Enable
OAI-PMH:ConfFile: /etc/koha/sites/kohadev/oai.conf
OAI-PMH:AutoUpdateSets: Enable
OAI-PMH:AutoUpdateSetsEmbedItemData: Enabled
Adminsitration->OAI set configuration->New set
Choose anything for setSpec and setName
On new set: Actrion->define mappings
Field: 952
Subfield: p
Operator: is equal to
Value: 3999900000001
1. koha-plack --restart kohadev
2. Go to http://localhost:8080/cgi-bin/koha/oai.pl?verb=ListRecords&metadataPrefix=marcxml
3. Confirm KOHA-OAI-TEST:1 is marked as deleted and not metadata visible
4. Go to http://localhost:8080/cgi-bin/koha/oai.pl?verb=ListIdentifiers&metadataPrefix=marcxml
5. Confirm KOHA-OAI-TEST:1 is marked as deleted
6. Go to http://localhost:8080/cgi-bin/koha/oai.pl?verb=GetRecord&metadataPrefix=marcxml&identifier=KOHA-OAI-TEST:1
7. Confirm record is marked as deleted and no metadata visible
8. View Sets and confirm the record appears in the set but as deleted record
9. Change OpacHiddenItemsHidesRecord syspref to "Don't hide" and repeat above steps
10. Confirm that the record metadata is now visible and the record is not marked as deleted
Signed-off-by: Jake Deery <jake.deery@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 37524: Do not attempt to renew check outs if there is nothing to renew
If patrons loans are not renewable and one hits "Renew all"
button in patrons "Check out" page, Koha is redirected to
"Export data" tool. This happens because when there is
nothing to renew call to function renew_all produces error:
"Uncaught TypeError: renew_all(...) is undefined". This
patch prevents call to this function and adds alert to
inform user that there are no items to be renewed.
To reproduce:
1. Find patron with check outs which renewals count has hit
the maximum limit of renewals.
2. Press "Renew all" button.
=> Koha is redirected to "Export data" tool.
3. Apply this patch.
4. Try to renew check outs again.
=> Alert pop up is displayed.
Sponsored-by: Koha-Suomi Oy Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Emily Lamancusa [Tue, 6 Aug 2024 20:12:51 +0000 (16:12 -0400)]
Bug 37587: Fix priority of multiple item-level holds
The rank parameter is passed per biblio record, not per item. When
placing multiple item-level holds on one bib record, only $rank[0] is
defined.
To test:
1. System preference and circulation rule setup
i. Set the system preference DisplayMultiItemHolds to Enable
ii. Edit the default circulation rule to allow 5 holds per record
2. Find or create a bib with 4 or more items
3. Place several bib-level holds
4. Place 4 or more item-level holds at once on that same record
i. Search for a patron to place the holds for (not one of the
patrons you used in step 3)
ii. Select "Hold a specific item"
iii. Check the checkboxes for 4 or more items
iv. Click Place hold
--> Note that one of the new item-level holds is at the end of the list
as it should be, but the rest are out of order
5. Cancel the item-level holds from step 4
6. Apply patch and restart_all
7. Repeat step 4
--> All the new item-level holds are now at the end of the list
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Thu, 12 Sep 2024 22:07:50 +0000 (15:07 -0700)]
Bug 37913: Remove more unreachable code in aqcontract.tt
When you successfully delete an acquisitions contract, you are redirected to
the page with the vendor details, which shows contracts for that vendor, which
shows you that the contract you deleted was deleted.
The aqcontract.tt template has a block in [% IF ( delete_confirmed ) %] (which
is never set) that thinks it will show you a '<h1>Contract deleted</h1>' and
make you click an OK button. That block has never been shown, but the button
is in a form which POSTs without an 'op' param, which is now forbidden by the
CSRF code, and will be caught by a test once bug 37728 updates the test.
There's nothing visible to test, so the test plan just makes sure nothing
blows up and you can still delete a contract.
1. Nothing will change, so start with the patch applied
2. Acquistions - click the Search button to search for vendors
3. New -> Contract
4. Give it a name, a start date, and an end date, and Save
5. In the list of contracts for My Vendor, click the Delete button for
the contract you created
6. In the confirmation page asking if you wanted to delete, click 'Yes,
delete contract'
7. Note that you are at acqui/supplier.pl?booksellerid=1, the details page
for the vendor, and your contract isn't listed at the bottom of the page,
and especially that you weren't shown a page that just said "Contract
deleted."
Sponsored-by: Chetco Community Public Library Signed-off-by: Sukhmandeep Benipal <sukhmandeep.benipal@inLibro.com> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 37917: Add some wait time to RecordSources_spec.ts for the intercepted request responses
This patch introduces the `cy.wait(500)` we use in several other Cypress
tests when an (intercepted) API request is made. This is very important
when tables are being rendered as DataTables is particularly bulky and
prone to take longer to finish loading the components if the CPU load is
a bit high.
I wasn't able to reproduce the problem very often, but you can test
yourself:
1. Run:
$ ktd --shell
k$ run_cypress --spec t/cypress/integration/Admin/RecordSources_spec.ts
2. Run it many times
=> FAIL: At some point it fails, you can overload your computer to try
3. Apply the patch
4. Repeat 2
=> SUCCESS: No failures :-D
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Nick Clemens [Tue, 20 Aug 2024 13:25:26 +0000 (13:25 +0000)]
Bug 37636: Remove sort of pending_checkouts by timestamp
Renewals or automatic renewal attempts can change the timestamp of an issue and cause a sort
on this field to functionally randomize the order of checkouts returned.
Prior to bug 19935 the GetPendingCheckouts routine returned items in issuedate order.
Removing the sort on timestamp will return the previous behaviour and provide a more predictable sorting
To test:
1 - Checkout some items to a patron
2 - Print a checkout slip - items are in the order they were checked out
3 - Renew an item,print the slip again it is now at the top of the list
4 - Apply patch, restart_all
5 - Print slip again - the items are now ordered in the order they were checked out.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Emily Lamancusa [Fri, 30 Aug 2024 20:50:36 +0000 (16:50 -0400)]
Bug 37797: Change cancel button to a link styled as a button
On the confirmation page for deleting a budget, change "Do not delete"
from a form submission to a link (styled to look like a button) in order
to avoid errors from POSTing with no op.
To test:
1. Go to Acquisitions > Budgets
2. Create a test budget
3. Attempt to delete the test budget
4. On the confirmation page, click "No, don't delete"
--> An error appears saying that the form was POSTed with no op!
5. Apply patch
6. Repeat steps 3-4
--> You are linked back to the Budgets page. The budget was not deleted.
Signed-off-by: Chloe Zermatten <chloe.zermatten@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 37757: (follow-up) Warn on bad values and survive
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 37757: Make notice_email_address() handle EmailFieldPrimary values more robustly
This patchset makes:
* The EmailFieldPrimary value 'OFF' be replaced by an empty string
* Koha::Patron->notice_email_address() handle the empty case more
gracefully
To test:
1. On main, manually set the EmailFieldPrimary syspref to empty
$ ktd --shell
k$ koha-mysql kohadev
> UPDATE systempreferences SET value='' WHERE variable='EmailFieldPrimary';
2. Enable `AutoEmailNewUser`
3. Create a new user
=> FAIL: Koha explodes like:
```
The method Koha::Patron-> is not covered by tests!
Trace begun at /kohadevbox/koha/Koha/Object.pm line 992
Koha::Object::AUTOLOAD('Koha::Patron=HASH(0xaaaae37ac550)') called at /kohadevbox/koha/Koha/Patron.pm line 1662
Koha::Patron::notice_email_address('Koha::Patron=HASH(0xaaaae37ac550)') called at /kohadevbox/koha/members/memberentry.pl line 448
...
4. Apply this patches
5. Run:
k$ updatedatabase
=> SUCCESS: Update succeeds
6. Restart all and retry creating a patron
=> SUCCESS: It worked!
7. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
CJ Lynce [Tue, 10 Sep 2024 18:12:04 +0000 (18:12 +0000)]
Bug 37873: Unable to delete user from routing list or preview/print routing list slip
This patch restores the ability to delete a recipient from a serials routing list.
It also fixes the slip preview when using the "Save and preview slip", and removes
the koha staff intranet head from the slip when using 'Print list' from the
Serial collection information screen.
To test:
1) Login to the staff client.
2) Open the Serials module.
3) + New subscription to add a new serial.
4) Create a new subscription.
a) Search for a record (I searched for 'dog') and chose that record.
b) Under 'When receiving this serial', select 'Create an item record'
c) Under the 'Item type' dropdown, select anything.
d) Click Next -> (and confirm the popup).
e) Select any 'First issue date'.
f) Select any 'Frequency'.
g) Enter a number larger than 5 in the 'Subscription length'.
h) Select any 'Subscription start date'.
i) Select your favorite numbering pattern.
j) Verify your prediction pattern using "Test prediction pattern".
k) Click "Save subscription".
5) On the 'Subscription details' screen, click "Receive".
6) Under the first volume, click "Add item" then "Save".
7) Repeat step 6 to receive one more issue.
8) On the 'Serial collection information' page click "+ Create routing list"
9) Click "+ Add recipients".
10) Search for and add several recipients.
11) Click "Close" to exit the 'Add recipients' page.
12) Click "Delete" next to any recipient.
*Note that the recipient is not deleted.
13) Click "Save" on the 'Modify routing list for ...' page.
14) Click "Save and preview routing slip" button.
*Note you are redirected to the Subscription details page, but no routing
slip preview appears.
15) Click "Serial collection" from the left-side menu.
16) Click "Print list" on either of the issues you previously received.
*Note the routing slip includes the staff intranet header, menu, etc.
17) Apply patch.
18) Return to the 'Serial collection information' screen for your subscription.
19) Click "Edit routing list".
20) Repeat steps 12-16 and verify the issues are fixed.
-"Delete" button works to remove a recipient from a list.
-"Save and preview routing list" button pops-up a preview before redirecting.
-"Print list" pops-up a vanilla routing list to print.
Sponsored-by: Westlake Porter Public Library Signed-off-by: Olivier V <olivier.vezina@inLibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 27490: More instances of changing language syspref to StaffInterfaceLanguages
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nicolas Hunstein <nicolas.hunstein@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Doris Tam [Thu, 25 Jul 2024 23:48:30 +0000 (23:48 +0000)]
Bug 27490: Update systempreference 'language' to 'StaffInterfaceLanguages'
Test plan
1. Go to the staff client
2. Go to administration
3. Search systempreferences for 'StaffInterfaceLanguages'
4. Ensure there is a systempreference variable matching 'StaffInterfaceLanguages'
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nicolas Hunstein <nicolas.hunstein@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test Plan (on main):
1 - Edit a patron
2 - Do not change anything and submit -> you get an error
3 - Apply both patches
4 - Repeat 1&2 -> everything works fine
5 - Try and delete the guarantor -> it will be deleted
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 37881: Editing patron with guarantor won't crash
This patch fixes issue introduced by BZ32530
Test Plan (on main):
1 - Edit a patron
2 - Do not change anything and submit -> you get an error
3 - Apply both patches
4 - Repeat 1&2 -> everything works fine
5 - Try and delete the guarantor -> it will be deleted
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Fri, 14 Jun 2024 12:36:12 +0000 (12:36 +0000)]
Bug 34805: Add order search form to acq start page
This patch adds the order search form to the Acquisitions home page.
I've modified acqui-home.pl so that it will pass the same default date
limiters as histsearch.pl.
To test, apply the patch and go to Acquisitions.
Test the order search form to confirm that it works as expected. Any
search from this version of the form should return identical results to
seraches performed from the "Advanced search" link in the sidebar.
Sponsored-by: Athens County Public Libraries Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Fri, 6 Sep 2024 12:13:37 +0000 (12:13 +0000)]
Bug 37846: Fix serial prediction pattern layout
This patch corrects the class which is added to the serial prediction
pattern in order for it to display as a second column in the
subscription edit page. "col-xs-*" classes no longer exist in Bootstrap
5.
To test, apply the patch and go to Serials.
1. Click "New subscription"
2. Enter a record number in the form (e.g. 55)
3. Click "Next" (and confirm there is no vendor)
4. Enter values for
- First issue publication date
- Frequency
- Subscription length
- Subscription start date
- Numbering pattern
- Numbering "Begins with"
5. Click "Test prediction pattern"
- The prediction pattern panel should appear as a second column on
the page.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Wed, 26 Jun 2024 11:53:21 +0000 (11:53 +0000)]
Bug 36337: Hiding lists with OpacPublic breaks styling for language list
This patch adjusts the CSS of elements in the OPAC header so that menu
items are correctly aligned with various combinations of the OpacPublic
and OpacLangSelectorMode system preferences.
To test, apply the patch and rebuild the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client)
- View the header menu in the OPAC with these combinations of settings:
- OpacPublic = On; OpacLangSelectorMode = Top;
- OpacPublic = On; OpacLangSelectorMode = Footer;
- OpacPublic = Off; OpacLangSelectorMode = Top;
- OpacPublic = Off; OpacLangSelectorMode = Footer;
- With each configuration, test that the elements in the header (Logo,
Cart/List menu, Language selctor, and user menu items) align
correctly. The Cart/List menu items should always align to the left,
the Language selector and user menu should aways align to the right.
Sponsored-by: Athens County Public Libraries Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Phil Ringnalda [Thu, 5 Sep 2024 03:38:27 +0000 (20:38 -0700)]
Bug 37801: Search results with limits create URLs that cause XML errors in RSS and Atom output
The template for RSS and Atom feeds of search results (curiously named
opac-opensearch.tt) is careful to escape ampersands in the query_cgi param
while adding it to URLs, but doesn't escape the limit_cgi param at all. It
should.
Two drive-by fixes for Atom: because the <title> when your search has a limit
includes , which isn't an XML character entity, you couldn't get as far
as the error from the <link> URL, and as long as I was going to have blame for
the line, I couldn't bear to leave the stray undefined SEARCH_RESULT. in the
(hard-coded and bogus) <link rel="last">.
Test plan:
1. In the OPAC, Advanced search - check the boxes to limit by item type Books
and Mixed Materials and search for the keyword Perl
2. At the top of the search results, click the orange RSS icon
3. That gives you an ugly "not well-formed" error, so in the URL for the page
change the final "format=rss" to "format=atom"
4. That gives you an ugly "undefined entity" error, so apply the patch
5. Reload the page with the Atom feed, it should change from an error page
to a garbled display of the feed. Click Back to go back to the RSS feed
and reload it if it's still cached on the error page. That should give
a pretty-printed display of the RSS feed without parsing errors
Sponsored-by: Chetco Community Public Library Signed-off-by: Sukhmandeep Benipal <sukhmandeep.benipal@inLibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Owen Leonard [Fri, 28 Jun 2024 11:21:13 +0000 (11:21 +0000)]
Bug 37213: (follow-up) Remove stray closing em tag, make title logic consistent with breadcrumbs
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Eric Garcia [Thu, 27 Jun 2024 18:06:47 +0000 (18:06 +0000)]
Bug 37213: Improved breadcrumbs in rotating collections
To test:
1. Tools -> Rotating collections -> New collections
2. Add a title and description
3. After adding the new collection notice the breadcrumb isn't right
4. Apply patch
5. Repeat steps 1 and 2
6. After adding the new collection notice the breadcrumb is improved.
Signed-off-by: Sam Lau <samalau@gmail.com> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
CJ Lynce [Wed, 28 Aug 2024 18:45:24 +0000 (18:45 +0000)]
Bug 37763: Do not show SQL report editor after 'Update and run'
This patch corrects an error where the SQL editor screen would appear
after the report results when using 'Update and run SQL' when editing
reports.
This also corrects a related issue where the saved_sql.id of the report
would be repeatedly appended to SQL code when using 'Update and run
SQL'.
To test:
1) Login to staff client
2) Navigate to Reports -> Create from SQL
3) Create a short report (SELECT * FROM items), name it and SAVE it.
4) On the resulting "Edit SQL report' page, click 'Update and run SQL'
5) See the report runs, but at the 'Edit SQL report' screen shows at the
bottom.
6) Apply Patch
7) Return to Reports -> Saved Reports and Edit the report you created.
8) On "Edit SQL report' page, click 'Update and run SQL'
9) Verify that the report runs, but the 'Edit SQL report' section is
gone.
Sponsored-by: Westlake Porter Public Library Signed-off-by: Sam Sowanick <sam.sowanick@corvallisoregon.gov> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Jonathan Druart [Tue, 3 Sep 2024 09:43:49 +0000 (11:43 +0200)]
Bug 37818: Remove 'XXX' from the installer code
We were adding "XXX" that was replaced with "999" before the move to the atomic update files (bug 13068).
We do no longer need this code.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>