Mirko Tietgen [Tue, 9 Aug 2016 12:55:43 +0000 (14:55 +0200)]
Bug 17087 - Set Test::WWW::Mechanize version to 1.42
This was set to a version that is not available in Wheezy or Jessie.
The version is not required, the only change to 1.42 (packaged for
Wheezy and Jessie) is a fix for Windows, see
http://cpansearch.perl.org/src/PETDANCE/Test-WWW-Mechanize-1.44/Changes
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Mon, 11 Apr 2016 03:18:26 +0000 (23:18 -0400)]
Bug 10148: Marc21 field 007 builder improper reload values
The more correct solution is fix that template file.
However, in the mean time, this works.
TEST PLAN
---------
1) find a record
2) edit record
3) click value builder for 007
4) change everything to pipes as much as possible.
(use Motion Picture to get all 00-22 values)
5) save
-- should save just fine.
6) click the value builder again
-- OOPS! Bad reload.
7) prove t/db_dependent/FrameworkPlugin.t
-- NOISY 007 messages.
8) apply patch
9) click the value builder again
-- good reload
10) prove t/db_dependent/FrameworkPlugin.t
-- No noise related to 007.
11) run koha qa test tools.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 3 Aug 2016 12:57:43 +0000 (13:57 +0100)]
Bug 17038: Fix XSS in catalogue/search.pl
Test plan:
Search for something like:
\";alert(1)//135
=> Without this patch you will see the alert
=> With this patch, no more alert
Note that this fix the parameters idx, q and op
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 3 Aug 2016 07:49:10 +0000 (08:49 +0100)]
Bug 17036: Fix XSS in circulation.pl
Test plan:
Enter the following in the "Check out" tab:
"><script>alert('XSS')</script>
=> Without this patch you will see the alert
=> With this patch, no more alert
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 28 Jul 2016 12:01:43 +0000 (13:01 +0100)]
Bug 17021: Fix XSS in circ/returns.pl
Test plan:
Enter the following in the barcode input:
<script>alert('XSS')</script>
=> Without this patch you will see the alert
=> With this patch, no more alert
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 2 Aug 2016 13:46:11 +0000 (14:46 +0100)]
Bug 17025: Fix XSS in serials-search.pl
Test plan:
Hit
/serials/serials-search.pl?ISSN_filter="%2F><script>alert('XSS')<%2Fscript>&searched=1
/serials/serials-search.pl?title_filter="%2F><script>alert('XSS')<%2Fscript>&searched=1
=> Without this patch you will see the alert
=> With this patch, no more alert
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
=> Without this patch you will see the alert
=> With this patch, no more alert
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Playing with OPACResultsLibrary syspref, biblio with items having different
home/holding library are displayed properly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Thu, 2 Jun 2016 14:01:56 +0000 (14:01 +0000)]
Bug 7441 - search results showing wrong branch?
When you search in the OPAC it shows you the HOME branch on the location
in XSLT, but if you click through to the detail page it shows you the
CURRENT BRANCH in the holdings table which is very confusing to patrons.
I don't know what's the right solution - home or holding branch, but they
should be the same in both places for the patron's sake. If you do the same
search in the staff client you see the right branch info on the search results
and on the detail page.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Search the catalog, you search should include results with items
that have different home and holding libraries.
4) The results should look the same as before the patch
5) Change the system preference OPACResultsLibrary to "current location"
6) Refresh your page of search results
7) The results show now show the holding library instead of the home library
Signed-off-by: Barbara Walters <bwalters@ncrl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 8 Aug 2016 09:48:36 +0000 (10:48 +0100)]
Bug 17069: Koha::Patron::Category->store must default checkprevcheckout to 'inherit'
Creating a new patron category raises an error "An error occurred when updating
this patron category. Perhaps it already exists."
DBIx::Class does not default to the value defined at the DB devel if the
key checkprevcheckout has been passed to the constructor.
We may need to provide a global fix for this kind of issue: if a column
is defined as "not null" but has a default value, the constructor
(Koha::Object->new) should not pass it to the DBIx::Class constructor
(even if assuming that null means default is a terrible mysqlism).
Test plan:
Create a new patron category.
Works as expected. Signed-off-by: Marc <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Thu, 20 Aug 2015 09:29:01 +0000 (11:29 +0200)]
Bug 6499: [QA Follow-up] Trivial adjustments
Removes commented line from bib1.att.
Adjust OCLC-number to Other-control-number in comment of ccl properties.
No need to explicitly add 035$a and $z if you index 035 completely in
record.abs as well as biblio-koha-indexdefs.xml.
Rerun koha-indexdefs-to-zebra.xsl on index defs.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 6499: Add Zebra index "Other-control-number" covering MARC21 035$a, 035$z and 035 (entire tag)
1) Apply patch
2) Make sure that you have a bib that has MARC21 035$a (and possibly also 035$z) populated.
pre 3) Replace all modified zebra files and restart zebra server
3) Rebuild zebra: misc/migration_tools/rebuild_zebra.pl -x -b -z
4) Add the following to the intranetuserjs syspref:
$(document).ready(function(){
// Add Other Control Number to advanced search
if (window.location.href.indexOf("catalogue/search.pl") > -1) {
$(".advsearch").append('<option value="Other-control-number">Other Control Number</option>');
}
});
5) Do an advanced search, select "Other Control Number" from the search menu, then add the Other Control Number in 035$a for the bib specified in step 1.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, no koha-qa errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Changing the package maintainer and removing a whitespace in debian/control.in.
Regenerated debian/control from that, which also adds libhtml-parser-perl because of bug 16971.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mirko Tietgen [Tue, 2 Aug 2016 13:41:12 +0000 (15:41 +0200)]
Bug 17019 - debian/changelog update
This has not been updated for a while. I plan to add the stable
releases.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17030: Make REST api available on packages with plack enabled
This patch is the starting point for making the REST api available
on Plack.
What it does:
- It creates the /api/v1/app.pl mount point in plack.psgi
- It enables the ProxyPass and ProxyPassReverse directives so it
is reached through Plack.
- It sets rewrite rules so we can use the 'pretty' urls (i.e.
/api/v1/patrons instead of /api/v1/app.pl/api/v1/patrons).
To test:
- Grab the following files, and put them in /etc/koha (overwrite the existing ones)
debian/templates/apache-shared-intranet-plack.conf
debian/templates/apache-shared-opac-plack.conf
- Tweak your /etc/koha/sites/kohadev/plack.psgi file so the API-related stuff
is present on your file.
- Make sure Plack is enabled for the instance:
$ sudo koha-plack --enable kohadev
$ sudo koha-plack --restart kohadev
$ sudo service apache2 restart
- Follow the previous patch test plan, but use this URLs (no pretty URL):
http://localhost:8080/api/v1/app.pl/api/v1/patrons/50
http://localhost:8081/api/v1/app.pl/api/v1/patrons/50
=> SUCCESS: You get a JSON response from the API [1]
- Not use this URLs:
http://localhost:8080/api/v1/patrons/50
http://localhost:8081/api/v1/patrons/50
=> SUCCESS: You get a JSON response from the API [1]
- Sign off :-D
[1] this patch made a bug visible (the session is lost when accessing the API through
Plack) but it shouldn't prevent its inclusion because the API right now is not even available
as default for developers to test or fix it.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch enables access to the REST API endpoint on packages setup.
It does so, by patching the shared apache-shared-intranet.conf and
apache-shared-opac.conf.
You can build your own master packages with this patch applied, or just:
- Grab
debian/templates/apache-shared-intranet.conf
debian/templates/apache-shared-opac.conf
and overwrite their counterparts in /etc/koha on a packages setup. For example
in kohadevbox.
- Have Koha loaded with all default data
- Create a superlibrarian user for you
- Login to the intranet and the OPAC
- Point your browser to:
http://localhost:8080/api/v1/patrons/51
=> SUCCESS: You get JSON data, for the patron you requested
http://localhost:8081/api/v1/patrons/51
=> SUCCESS: You get JSON data, for the patron you requested
- Sign off :-D
Note: I use the HTTPRequester addon for Firefox, re-using the CGISESSID value from the
browser session cookie, in the headers.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mirko Tietgen [Sat, 6 Aug 2016 11:52:26 +0000 (13:52 +0200)]
Bug 17065 - Rename C4/Auth_cas_servers.yaml.orig
C4/Auth_cas_servers.yaml.orig gets cleaned away after every package build because
of the .orig extension. This patch moves it.
It is only a sample file, there is no functionality to test. Just verify that the
file is there with the new name after you applied the patch.
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This .sql~ backup file should not have been committed.
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mirko Tietgen [Mon, 1 Aug 2016 15:13:55 +0000 (17:13 +0200)]
Bug 17013 - build-git-snapshot: add basetgz parameter and update master version number
This adds a basetgz parameter to specify a pbuilder image.
I use this to build against different distributions.
This also updates the version number for master builds to 16.06.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
phette23 [Sat, 6 Aug 2016 17:44:53 +0000 (10:44 -0700)]
Bug 17068: empty <li> in opac-reserve.tt
empty HTML list item on 'holds' page, to test:
- sign in as user
- attempt to place hold
- view source in between 'holds note' textarea & <!-- ITEM HOLDS --> comment
- note empty <li>
- apply patch
- repeat process above up until patch
- no more empty <li>
Signed-off-by: Jason Robb <jrobb@sekls.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Mark Tompsett [Tue, 31 May 2016 16:01:46 +0000 (12:01 -0400)]
Bug 16622: some tests triggered by prove t fail for unset KOHA_CONF
TEST PLAN
---------
1) unset KOHA_CONF
2) prove t
-- 00-load.t dies miserably
3) prove t/Creators.t
-- fails
4) apply patch
5) prove t
-- noisy, but all tests successful
6) prove -v t/Creators.t
-- 2 skipped tests
7) run koha qa test tools
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Bug 17044: Fix wrong destination for 'api' directory
The original Makefile.PL tweak missed to trim the directory name thus
repeating the 'api' directory like in 'api/api'.
To test:
- Make a standard install (for example in /usr/share/koha
=> FAIL: check /usr/share/koha/api/api exists
- Make a single install (for example in /home/tcohen/koha-single)
=> FAIL: check /home/tcohen/koha-single/api/api exists
- Apply the patch
- Make a standard install (for example in /usr/share/koha
=> SUCCESS: check /usr/share/koha/api exists and doesn't contain a nested 'api' dir
- Make a single install (for example in /home/tcohen/koha-single)
=> SUCCESS: check /home/tcohen/koha-single/api exists and doesn't contain a nested 'api' dir
- Sign off :-D
Note: this affects the packages too, as the standard install is used as a basis. Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch clarifies the note on the upload tool
that states that no categories are defined.
To test:
* Log in to Koha
* Confirm that you have no values set for the UPLOAD
authorized value category
* Visit Tools > Upload
* Check the warning note for typos
* Add a authorized value category for UPLOAD
* Visit Tools > Upload
* Confirm that note is replaced
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Bug 16861: Translatability: Fix separated "below" in circulation.tt
This patch propose to fix this two entries in PO files:
"See highlighted items" and "below"
Also add some Font Awesome Icons
To test:
-Apply patch 16810 on top and this patch
-Go to a patron who has overdues
-See the link "See highlighted items below" with a hand down icon
-Look the new plus icon to "Add a new message" to the patron.
-Add a few messages and notice about the trash icon in "Delete" links
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Mark Tompsett [Wed, 6 Jul 2016 18:17:20 +0000 (14:17 -0400)]
Bug 16864: Silence warnings in t/db_dependent/ILSDI_Services.t
prove t/db_dependent/ILSDI_Services.t
generates noisy output as a result of the ambiguous context
of two $cgi->param() calls.
By storing into scalar variables, and then using the scalar
variables, the code maintains readability and fixes the problem.
TEST PLAN
---------
1) prove t/db_dependent/ILSDI_Services.t
-- noisy.
2) apply patch
3) prove t/db_dependent/ILSDI_Services.t
-- not noisy
4) run koha qa test tools
Signed-off-by: Marc <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
When the auth_header table has records which exclude 1xx and
2xx tags, the $bibfield doesn't match anything. This in turn
sets it to undef, which triggers an error on the next line
killing the test.
This was completely refactored to provide the data necessary
for the tests to pass, and to be more comprehensive (both MARC
and UNIMARC are tested). The tests are then run.
C4::Headings::authorities is mocked, so that this test is not
dependent on a search engine.
TEST PLAN
---------
1) back up DB
2) DELETE FROM auth_header;
3) SOURCE auth_header.sql;
-- the provided file
4) prove t/db_dependent/Linker_FirstMatch.t
-- should barf before running all the tests
5) apply all patches
6) prove t/db_dependent/Linker_FirstMatch.t
-- should work happy
7) run koha qa test tools
8) restore your backup
Followed test plan, behaves as expected. Signed-off-by: Marc <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Marc Véron [Tue, 5 Jul 2016 05:14:26 +0000 (07:14 +0200)]
Bug 16871: Translatability: Avoid [%%-problem and fix related sentence splitting in catalogue/detail.tt
In koha-tmpl/intranet-tmpl/prog/en/modules/catalogue/detail.tt,
fix line splitted TT directives and sentence splitting leading
to translatability problems. (See first comment).
To test:
- Apply patch
- Go to detail pages of biblios with waiting holds
- Verify that messages in column 'Status' are OK
- Examine code in patch to make sure that the simplification in logic
makes sense and that no TT directive is splitted
- Bonus test:
- Go to folder misc/translator. Run perl translate create xx-XX
- Verify that monster mentioned in first comment no longer exists
(in po/xx-XX-staff-prog.po)
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
This module is already used in opac-password-recovery.pl.
It is loaded in Acquisition, but not used (anymore?).
It is not yet listed in PerlDependencies.
Note: The module is packaged for Debian Wheezy and Jessie.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Bug 16818: External auth redirect broken under Plack
Test plan:
0) Have either CAS or Shibboleth authentication enabled under Plack.
1) Hover over the authentication link on the staff client or OPAC, and
notice that it has either '.../opac/...' or '.../intranet/...' instead
of '.../cgi-bin/koha/...'. (This will be a complete dealbreaker for CAS
authentication.)
2) Apply patch.
3) Check links again; they should now have the correct paths.
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Did not test CAS or Shibboleth, but no regression found.
This patch just does that, and removes it from the comment on /etc/default/koha-common
To test:
- Apply the patch
- Run:
$ vagrant ssh ; cd kohaclone
$ sudo debian/scripts/koha-indexer --stop kohadev
$ sudo debian/scripts/koha-indexer --start kohadev
=> SUCCESS: Verify no warning is shown on the indexer-output.log file
- Sign off
Kyle M Hall [Wed, 27 Jul 2016 18:00:53 +0000 (18:00 +0000)]
Bug 16988 - Suspending a hold with AutoResumeSuspendedHolds disabled results in error
iUnless AutoResumeSuspendedHolds is enabled, attempting to suspend a
hold from reserve/request.pl results in the following error:
The given date (undefined) does not match the date format (us) at
/home/vagrant/kohaclone/Koha/DateUtils.pm line 152.
Test Plan:
1) Enable SuspendHoldsIntranet
2) Disable AutoResumeSuspendedHolds
3) Attempt to suspend or unsuspend a hold
4) Note the error
5) Apply this patch
6) Repeat step 3
7) The hold should suspend or resume correctly
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Megan Wianecki <mwianecki@mtpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Tue, 2 Aug 2016 13:51:49 +0000 (14:51 +0100)]
Bug 17026: Fix XSS in serials/checkexpiration.pl
Test plan:
Hit:
/serials/checkexpiration.pl?title="><script>alert("XSS")</script>&date=12/02/2002
/serials/checkexpiration.pl?issn="><script>alert("XSS")</script>&date=12/02/2002
=> Without this patch you will see the alert
=> With this patch, no more alert
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Mon, 1 Aug 2016 10:13:53 +0000 (11:13 +0100)]
Bug 16715: Use Sereal::Decoder and Sereal::Encoder instead of Sereal
Sereal is not packaged for jessie, so let's use Sereal::Encoder and
Sereal::Decoder instead.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Tue, 3 May 2016 18:58:57 +0000 (18:58 +0000)]
Bug 16436 - Allow action logs to be logged to the koha log file
Test Plan:
1) Ensure that your Koha::Logger configuration is in good working order
2) Apply this patch
3) Modify the first line of your log4perl.conf file from:
log4perl.logger.intranet = WARN, INTRANET
to
log4perl.logger.intranet = INFO, INTRANET
4) Change a system preference setting
5) Note the new line in your log file!
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Wed, 20 Apr 2016 14:29:03 +0000 (10:29 -0400)]
Bug 16310 - Remove the use of "onclick" from audio alerts template
This patch removes one use of "onclick" in favor of defining events in
the JavaScript.
This patch also makes changes to the style of some buttons to make the
interface a little more consistent with current practices.
To test, apply the patch and go to Administration -> Audio alerts.
- In the list of existing audio alerts, click the "Edit" button for any
alert. The correct data should be loaded in the edit form.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Thu, 19 May 2016 13:28:02 +0000 (13:28 +0000)]
Bug 15397 - Pay selected does not works as expected
When patron has more fees (account lines) and you wan't to pay just some
of them, you select wanted lines a click on "pay selected" button. But
the fine isn't paid, the "amountoutstandig" is not modified, but it is
added new line with "pay" code an with amountoutstanding below zero.
Paying one or all fine works as expected. Paying selected worked some
time ago, but I don't know when it stopped working, we realize it after
upgrade to 3.22.
Test Plan:
1) Apply this patch
2) Pay fines using "Pay selected"
3) Note the payment and the fees outstanding balances are reduced!
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 22 Jul 2016 08:51:00 +0000 (09:51 +0100)]
Bug 16573: Define virtualshelves.created_on as datetime for existing installs
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch change 'created_on' virtualshelves column to
datetime type
To test:
1) Apply the patch
2) Run updatedatabase.pl
3) Verify type of 'created_on' column
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16573: fix structure and sample data for MySQL 5.7
Web install on Ubuntu 16.04/Mysql 5.7 fails.
This patch makes small changes to make installation
possible to kohastructure.sql and some sample files.
Sample values for quotes table can't have '0000-00-00 ...' values
nor NULL values, now() is perhaps an option.
Depends on Bug 16572
To test:
1) System with MySQL 5.7, for example Ubuntu 16.05
2) Apply 16572
3) Try web install, it fails
4) Apply this and next patch
5) Try again, now it succeed
This is only for English install, i18n files needs revision
I can do that if this is accepted.
Perphaps a change is needed to updatedatabase.pl
Ammended patch, 'created_on' field on virtualshelves
can't be timestamp default null, mysql 5.5 complains
that only one timestamp column can be defined as
default not null. Changed to 'datetime' type.
Can provide followup with updatedabase change,
but need an opinion if this type change makes sense.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16573: fix linkid value on marc_subfield_structure
followup to previous patch.
This patch fixes linkid value. It was set to '', but
declared as tinyint.
Mysql < 5.7 replaced this with nearest right value, i.e 0
Mysql 5.7 gives error here.
Also some normalization, all lines with data begins with two tabs
To test:
On top of Bug 16572 and previous patch
1) Run webinstaller
2) Add mandatory values
3) There must be no problems on MySQL 5.7
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Tue, 8 Sep 2015 09:32:27 +0000 (11:32 +0200)]
Bug 14793: New cataloguing plugin unimarc_field_225a_bis
It is similar to unimarc_field_210c_bis, but searches in
biblioitems.collectiontitle instead of biblioitems.publishercode
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc [Wed, 20 Jul 2016 14:54:34 +0000 (16:54 +0200)]
Bug 16945: PatronSelfRegistration: Add note about setting PatronSelfRegistrationDefaultCategory
In OPAC, patron self registration works only when
PatronSelfRegistrationDefaultCategory is set to a valid patron category.
This patch adds a note for
PatronSelfRegistration on Home > Administration > System preferences.
To test:
- Apply patch
- In staff client, search system preferences for PatronSelfRegistration
- Verify that note appears with PatronSelfRegistration
(Amended to fix typo, see comment #3, 2016-07-21 mv)
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Tue, 12 Jul 2016 18:07:18 +0000 (14:07 -0400)]
Bug 16906 - Add DataTables pagination and filter to top of saved SQL reports table
This patch adds a DataTables toolbar to the top of the saved SQL reports
table so that pagination and filtering controls are at the top as well
as the bottom.
To test, apply the patch and go to Reports -> Saved reports. There
should be controls at the top of the table of saved reports for setting
number of results, pagination, and searching.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 4 Jul 2016 14:06:18 +0000 (15:06 +0100)]
Bug 16847: Add empty option to Salutation/title
At the OPAC there is no way to empty this value.
I think it should be allowed to empty it.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 4 Jul 2016 14:03:18 +0000 (15:03 +0100)]
Bug 16847: Remove C4::Members::GetTitles
This subroutine just reads the content of a pref, split it, add an
empty string and returns.
It is not really useful and the code in the script (memberentry.pl) uses
the only occurrence of CGI::popup_menu
Let's remove it and build the dropdown list in the template.
Test plan:
1/ Empty BorrowersTitles, edit a patron and confirm that the "Salutation"
does not appear
2/ Fill BorrowersTitles with "Mr|Mrs|Miss|Ms", edit a patron and confirm
that the "Salutation" dropdown list is correctly filled.
The default option should be selected if you are editing a patron with a
title defined.
This should also be tested at the OPAC.
Followed test pan, works as expected in Staff and OPAC Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 22 Jul 2016 09:26:12 +0000 (10:26 +0100)]
Bug 15451: Better error handling
1/ If a librarian edit (add_validate) a non-existing csv profile, we
explicitely die
2/ If you try to delete a non-existing csv profile, you will now get a
nice alert box
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15451: (followup) fix filename extension for csv file
This patch does the same as basket/downloadcart.pl
to set '.csv' as filename extension for downloadshelf.pl
To test:
1) Define a CSV MARC profile
2) On staff download a list, extension is '.NN'
with 'NN' the CSV profile id.
3) Apply the patch
4) Download again, check extension is now '.csv'
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 6 Jan 2016 08:58:13 +0000 (08:58 +0000)]
Bug 15451: Do not considered a Resultset as a Result
The previous calls were wrong, but there is something bad with the DB
structure: export_format.profile should be a unique key.
This patch fixes the previous calls and add a FIXME not to forget to fix
the DB structure.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Previous test where done with all patches applied,
including this one, and all worked.
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 30 Dec 2015 18:28:55 +0000 (18:28 +0000)]
Bug 15451: Koha::CsvProfiles - Remove the residue
This patch erase all traces of C4::Csv since it's not used anymore.
All occurrences have been replaced by previous patches to use
Koha::CsvProfiles.
Note that GetMarcFieldsForCsv was not used prior this patch set.
Test plan:
git grep 'C4::Csv'
should not return any result.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No more traces of the file.
This produces a koha-qa fail, due to the missing file.
No other errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine just returned a csv profile for a given id.
It is replaced in this patch by a call to Koha::CsvProfiles->find.
There is nothing to test here, these changes have been tested in
previous patches.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine returned the export_format_id for a given profile name.
This can be done easily with the Koha::CsvProfiles->search method.
Test plan:
Export records using the misc/export_records.pl script and the
export tool.
If you are exporting using the MARC format, the profile filled in the pref
ExportWithCsvProfile will be used (or the one passed in parameter of
misc/export_records.pl).
If you are exporting using the CSV format, you can choose a profile in
the dropdown list.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Exported using tool & cmd, marc & csv. Pref is used.
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine returned the csv profiles for a given type.
This could be done easily with the new Koha::CsvProfiles->search method.
Test plan:
To do at the OPAC and staff interface!
1/ Export a list using a CSV profile
2/ Export your CART using a CSV profile
Note that only MARC profiles should be available.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested on staff/opac & cart/list
Small problem on filename extension fixed in followup.
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 31 Dec 2015 10:23:24 +0000 (10:23 +0000)]
Bug 15451: Rewrite the csv profile tool script
This page was inconsistent with the other admin and tool pages.
The 2 tabs 'New profile' and 'Edit existing profile' were useless, the
ergonomic needs to be revisited.
This patch applies the same script/page structure as others: by default
a table containing all csv profiles is displayed with 2 action links:
edit and delete.
Test plan:
1/ Create 1+ CSV profiles, with different types (marc and sql)
2/ Update some values using the Edit link
3/ Delete a CSV profile
Note: When deleting a CSV profile, it would be great to warn the user if it is
used.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No problems on create, update and delete.
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jesse Weaver [Wed, 8 Jun 2016 17:31:54 +0000 (11:31 -0600)]
Bug 16715: Proposed followup to use Sereal for serialization
This manages to eke out a bit more performance on my machine.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Fri, 27 May 2016 20:51:56 +0000 (16:51 -0400)]
Bug 11606: Add Novelist client to staff
To test:
1 - Apply patches
2 - Update database
3 - View detail pages for some records and ensure no changes have been made
4 - Enable NovelistSelectStaffEnabled (and enter or have info in the
Profile and password)
5 - Set NovelistSelectStaffView to 'above'
6 - View detail pages for some records, verify that if novelist info is
available it is displyaed and nothign is displayed if not
7 - Repeat with all staff view options
Sponsored by:
Walla Walla Public Library (http://www.wallawallapubliclibrary.org/)
Los Gatos Library (http://www.losgatosca.gov/42/Los-Gatos-Library)
Chris Cormack [Mon, 4 Jul 2016 21:12:24 +0000 (09:12 +1200)]
Bug 7143 : More new devs
confirmed dates against emails and downloads.koha-community.org
Two names added correctly.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Chris Cormack [Mon, 20 Jun 2016 20:39:34 +0000 (08:39 +1200)]
Bug 7143 : Adding new developers
Claire Gravely seemed to be a cut and paste error.
June 3 better matches git log.
Three other names in history are in about as well.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 13 Jun 2016 06:36:48 +0000 (08:36 +0200)]
Bug 7143: [QA Follow-up] Adjusting developer information
For consistency we should not only add firstnames to the list of
developers in about.tt and history.txt.
Adding some surnames with the help of git log and Bugzilla. Also
corrected a closing li tag.
Note that I did not find one surname: Natasha of Catalyst Academy.
Probably Chris could add that missing piece.
NOTE: Natasha piece still needs clean up.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Mon, 18 Jul 2016 11:02:14 +0000 (11:02 +0000)]
Bug 16934 - Cannot add notes to canceled and deleted order line
Some librarians would like to be able to add notes to deleted order
lines to keep track of data such as what title the order line was for.
For some reason ModOrder dies if a biblionumber is passed in, even
though it does not use biblionumber and does not need it to exist in any
fashion! This limitation should be removed.
Test Plan:
1) Create a basket with an orderline
2) Cancel the order / delete the record
3) Click the "Add internal note" link for that order line
4) Fill in a note and click "Save"
5) Note the error
6) Apply this patch
7) Repeat steps 3-4
8) Note this time the note is saved!
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 22 Jul 2016 07:14:27 +0000 (08:14 +0100)]
Bug 16958: Fix XSS in opac-imageviewer.pl
Test plan:
Trigger
/opac-imageviewer.pl?biblionumber=14&imagenumber=7"><sCrIpT>alert(42)<%2fsCrIpT>
=> Without this patch you will see the JS alert
=> With this patch applied you won't see it
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc [Thu, 21 Jul 2016 08:22:57 +0000 (10:22 +0200)]
Bug 16947: Can not modify patron messaging preferences
To verify:
- Set syspref 'EnhancedMessagingPreferences' to 'Allow'
- In staff client, go to a patron's detail page
- Edit Patron messaging preferences (using link below table)
- Save
Result: Form does not save, stays open
JavaScript error in intranet-tmpl/prog/js/members.js line 107
TypeError: document.form.password is undefined
To test:
- Apply patch
- Repeat steps above
- Verify that messaging preferences save as expected
- Verify that other patron modifications work as before
NOTE: remember to force reload of the javascripts.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Srdjan [Mon, 13 Jun 2016 03:35:56 +0000 (15:35 +1200)]
Bug 16716: Replaced wrong GROUP BY with DISTINCT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15974: Rancor: Correctly select existing authorized value
Test plan:
1) Open up a record in Rancor with an itemtype besides the first in
the list ('BK' in the sample itemtypes).
2) It will show "Book" instead of the correct itemtype.
3) Apply patch, reload the page.
4) The correct itemtype should now show.
NOTE: The scope is only 942$c. This corrects that.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marc Véron [Thu, 14 Jul 2016 13:50:22 +0000 (15:50 +0200)]
Bug 16941: Can not add new patron in staff client
To reproduce:
- Go to staff client Home > Patron
- New patron
- Choose a category and fill form, submit
Result: Form reloads, patron data are not saved.
To test:
- Apply patch
- Repeat steps above
- Verify that patron data are saved and the new patron's
detail page displays
- Try to enter a duplicate patron (e.g. same surname, firstname
and birthday as above)
- Verify that a duplicate message appears
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine has been added by
commit 5904681faca77c87ff8071414d66e123a2d3baa9
Date: Wed Mar 19 10:11:12 2008 -0500
CleanBorrowers fixing.
but has never been used.
It can be removed safely.
Test plan:
git grep GetBorrowersNamesAndLatestIssue
should not return any results.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::Members::checkuniquemember was not really nicely written, was only
used once and was not covered by tests.
I think it does not make sense to keep such complexity and have this
code in the subroutine/method.
Looking at this patch it seems that what this subroutine did can be done
easily in the pl script in few lines.
Test plan:
1/ Create 2 organisations with the same "surname": you should get a
warning.
2/ Create 2 patrons (non-organisation) with the same
surname/firstname/date of birth, you should get a warning
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sat, 9 Jul 2016 13:37:46 +0000 (14:37 +0100)]
Bug 16889: Remove C4::Items::biblioitems_columns and use Koha::Biblioitems->columns instead
Test plan:
Add new rule to the "Automatic item modifications by age" tools
(tools/automatic_item_modification_by_age.pl) and make sure the columns
of the biblioitems table are correctly displayed in the 'Conditions'
dropdown list.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sat, 9 Jul 2016 13:35:02 +0000 (14:35 +0100)]
Bug 16889: Remove C4::Items::columns and use Koha::Items->columns instead
Test plan:
Add new rule to the "Automatic item modifications by age" tools
(tools/automatic_item_modification_by_age.pl) and make sure the columns
of the items table are correctly displayed.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sat, 9 Jul 2016 13:35:08 +0000 (14:35 +0100)]
Bug 16889: Remove C4::Members::columns and use Koha::Patrons->columns instead
Test plan:
Import some patrons (tools/import_borrowers.pl) and make sure it imports
the patrons correctly.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sat, 9 Jul 2016 13:32:40 +0000 (14:32 +0100)]
Bug 16889: Add Koha::Objects->columns
Currently we have 3 subroutines to retrieve the columns of tables:
C4::Members::columns, C4::Items::columns and
C4::Items::biblioitems_columns.
It is easier to have a Koha::Objects->columns method to provide the
different classes to retrieve their related column names.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16876: Remove Full Heading column from OPAC Auth search results
To test:
1) Go to Authority Search and do a search
2) Notice that there is a Full Heading column that has 'View full
heading' links. These take up a lot of space and don't mean a lot to
the user
3) Apply patch and refresh
4) Notice that the the Full Heading column is gone and there is now a
Details column next to the authorities. Confirm the link takes you to
the expected authority detail page.
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 4 Jul 2016 13:00:58 +0000 (14:00 +0100)]
Bug 16853: Move changepassword to Koha::Patron->update_password
This patch moves the code from C4::Members::changepassword to
Koha::Patron->update_password
Test plan:
Change your password at the OPAC and the staff interface
This should work as before
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I rebased this on top of 16849 because they were conflicting.
Tests pass, code looks good (as usual) and I checked both OPAC
and staff password change work as expected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 4 Jul 2016 10:29:16 +0000 (11:29 +0100)]
Bug 16849: Move IsDebarred to Koha::Patron->is_debarred
In order to move IsMemberBlocked to Koha::Patron it makes sense to move
the code from Koha::Patron::Debarments::IsDebarred to
Koha::Patron->is_debarred.
Test plan:
1/ Add a restriction to a patron
2/ make sure he is not able to checkout items any more
3/ Make sure he cannot get a discharge
4/ Put a hold and make sure you get "Patron has restrictions"
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Thu, 14 Jul 2016 15:45:54 +0000 (11:45 -0400)]
Bug 16681 - Allow update of opacnote via batch patron modification tool
To test:
1 - Select a batch of patrons (via list, saved file, and cardnumber
entry)
2 - Verify you cannot edit 'opacnotes' field, nor can you see
'borrowernotes' field in table, though you can edit it
3 - Verify editing works as expected
4 - Apply patch
5 - Select a batch via each method as above
6 - Note both note columns display in table
7 - Note that you can edit or clear the opacnotes field as expected
8 - Verify other feautres work as previously
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Tue, 17 May 2016 15:18:14 +0000 (11:18 -0400)]
Bug 16538: Improve the style of progress bars
This patch updates the style of progress bars to make them a little
nicer. Progress bars in the staff client are not built in a consisten
way. Some have been updated to use the <progress> element and some have
not. This patch improves some styling common to both kinds.
Other changes:
- Redundant in-page CSS has been removed from many pages.
- An invalid "min" attribute has been removed from several instances of
<progress>.
- Corrected capitalization.
- Fixed incorrectly quoted attributes.
- Added missing form "action" attributes.
To test, clear your browser cache if necessary. Apply the patch and
test uploads on the following pages:
- Circulation -> Offline circulation file upload
- Tools -> Batch item modification
- Tools -> Batch record modification
- Tools -> Stage MARC records for import
- Tools -> Manage staged MARC records
- Tools -> Upload local cover image
- Tools -> Upload
In all cases, progress bars should look improved and work correctly.
Test Tools -> Batch item deletion. Unused background job handling markup
has been removed. Deletion processing should work correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha [Tue, 17 May 2016 04:46:31 +0000 (04:46 +0000)]
Bug 16531: Circ overdue report is showing an empty table if no overdues
EDIT: Comment 2
EDIT2: using noreport variable (Comment 5)
To test:
1) Ensure you have no items overdue
2) Go to Circ -> Circulation reports -> Overdues
3) Notice empty table, '0 items overdue' heading
4) Ensure syspref FilterBeforeOverdueReport is set to 'Don't require'
5) Apply patch and refresh page
6) Notice empty table is no longer showing and page says "There are no
overdues"
7) Apply a filter to search
8) Page now says "There are no overdues matching your search" with a
link to reset filter.
9) Click Reset filter -> confirm any filters you applied are cleared.
10) Set FilterBeforeOverdueReport to 'Require' and refresh overdue
report
11) Page should say "Please choose one or more filters to proceed"
12) Check out an item to a member, ensure due date is a date that has
passed (i.e. yesterday)
13) Refresh overdue report page
14) Page should still say "Please choose one or more filters to proceed"
15) Set FilterBeforeOverdueReport to 'Don't require'
16) Confirm table now shows correctly with '1 items overdue' heading
etc.
Sponsored-by: Catalyst IT Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
projects / koha.git / log