Kyle Hall [Tue, 18 Oct 2022 16:25:35 +0000 (12:25 -0400)]
Bug 31557: Add ability for holds queue builder to prioritize either matching a patron's home library to the item's home or holding library
Right now the holds queue builder starts filling bib-level holds with
items whose patron's home library matches the item's home library.
It would be good and reasonable to have the option to prioritize
item's whose patron's home library matches the item's holding library
to minimize transfers.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Fri, 21 Apr 2023 11:09:34 +0000 (07:09 -0400)]
Bug 33580: Bring back ability to mark item as seen via SIP2 item information request
Prior to Koha 22.05, the SIP2 item information message had a side affect of updating the datelastseen field for items. This bug has been fixed, but was being utilized by inventory tools that used SIP2. We should bring back this affect and formalize it as an optional SIP2 config account setting.
Test Plan:
1) Apply this patch set
2) prove t/db_dependent/SIP/Message.t
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Fri, 28 Apr 2023 18:30:19 +0000 (14:30 -0400)]
Bug 32993: Holds priority changed incorrectly with dropdown selector
Test Plan:
1) Find record with at least 3 holds.
2) Change first holds priority as 2, Priority is changed to 3.
3) Try to change priority back to 1, Priority is changed to 2.
4) Apply this patch
5) Reload the page
2) Change first holds priority as 2, Priority is changed to 2.
3) Try to change priority back to 1, Priority is changed to 1.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Hinemoea Viault <hinemoea.viault@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Thu, 11 May 2023 10:51:46 +0000 (12:51 +0200)]
Bug 33320: Add spacing in Patron modification requests
* Go to the OPAC, log into your account
* Make changes to your personal details and save
* Go to the staff interface and use the link on the start page to
moderate the change request
* At the top of the list you'll see something like:
Without this patch:
Ignore|Patron details
With this patch:
Ignore | Patron details
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Sat, 22 Apr 2023 10:16:59 +0000 (10:16 +0000)]
Bug 33167: Fix TT comment for better translatability
We just figured out that multi-line TT comments show up
weirdly in translations and fixed it on bug 33332. So
this just follows the newly established pattern.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Thu, 9 Mar 2023 20:37:28 +0000 (20:37 +0000)]
Bug 33167: Cleanup staff detail page
This patch begins reduing some of the extra things we are doing in
detail.pl that could easily be handled in the templates - fetching
authorised values and branches etc
It also removes a loop to find items that should be hidden, and instead
uses a searh parameter
The template changes either use item object rather than passed
variables, or utilize plugins to fetch authorised valued
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Thibaud Guillot [Tue, 31 Jan 2023 14:27:09 +0000 (15:27 +0100)]
Bug 32766: (follow-up) Fix translation function
The previous syntax causes a warning during the execution of the translation script
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Thibaud Guillot [Tue, 31 Jan 2023 10:44:09 +0000 (11:44 +0100)]
Bug 32766: Update some labels for better understanding and translation
examples: 'crayon'->'carchoal' or 'camaiu'->'cameo' Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 33567: Add a dbrev for installation with empty pref
To keep current behavior, we can copy the removed fallback
into the syspref value in case someone might have cleared the pref.
Note: We are not restoring deleted prefs here; that is a data problem
outside the scope of this report. A regular installation should always
have this pref.
Test plan:
Run updatedatabase.pl
Bonus: Clear the pref Reference_NFL_Statuses and run again, verify that
the pref has changed.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run t/db_dependent/XSLT.t again
Should pass now.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This test should fail now, since it would trigger the hardcoded
fallback in the XSLT module.
Test plan:
Run t/db_dependent/XSLT.t
Should fail.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Fri, 17 Feb 2023 13:01:02 +0000 (13:01 +0000)]
Bug 32995: Pass user agent string for OverDrive fulfillment
This patch simply adds the string Koha/VERSION to the fulfillment
request
TO test:
1 - Have OverDrive credentials for testing
2 - Enable all the overdrive options in system preferences
3 - Sign in to opac with an overdrive user and verify you can checkout
and download titles
4 - Sign off
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Not tested with OverDrive, but change looks harmless enough.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Wed, 10 May 2023 13:19:38 +0000 (13:19 +0000)]
Bug 33699: Typo in identity_provider_domains.tt (presedence)
This patch corrects the typo "presedence" with "precedence."
The patch also corrects some grammar:
"so if the 'library.com' domain will take presedence over
'*library.com'"
...changed to...
"so 'library.com' domain will take presedence over '*library.com'"
I also changed the <div>s inside that block of help text to <p> in order
to improve legibility.
To test, apply the patch and go to Administration -> Identity providers
-> Manage domains (on an existing provider) -> Edit, and click the
"More" button under the "Domain" field.
Confirm that the text is correct.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Wed, 10 May 2023 08:41:30 +0000 (10:41 +0200)]
Bug 33642: Fix 'No log found.' in viewlog
It should ease translatability and remove an extra space.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Mon, 1 May 2023 18:38:30 +0000 (18:38 +0000)]
Bug 33445: (follow-up) Allow all search fields to be passed through and returned when trying another search
It seems the form didn't populate all fields form data passed in. This patch
corrects that
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Mon, 1 May 2023 18:31:30 +0000 (18:31 +0000)]
Bug 33445: (follow-up) Pass form values through when clicking 'Try another search'
We didn't include anything except the authid id in the try again form, this
patch extends to cover all the fields
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Fri, 28 Apr 2023 12:39:58 +0000 (12:39 +0000)]
Bug 33445: Pass through form info if present and use record values otherwise
This patch updates the form to pass through values formthe form when searching, and
to use record values if nothing is passed in.
TO test:
1 - Without the patch, edit a personal name authority record
2 - Replace 100 subfield a (200 subfield a for UNIMARC) with your own name
3 - Click "Replace record via Z39.50/SRU search"
4 - Note that prefilled search field contains the original value, not your name.
5 - Replace the Author (personal) field with your name in the search form
6 - choose a search target, and click Search.
7 - Note that the results of the search are for the original value, not your name
8 - From the details page of a record, click 'Edit -> Replace record via Z3950'
9 - Note form is prefilled
10 - Change value as in 5 and search
11 - Note original term was searched
12 - Apply patch, restart all
13 - Repeat searches as before
14 - Confirm that form is prefilled with record or the updated value
15 - Confirm your entered search terms are always searched
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Wed, 10 May 2023 10:42:13 +0000 (10:42 +0000)]
Bug 33655: z39.50 search no longer shows search in progress
This patch adds an id to z39.50 search interface submit buttons so that
the JavaScript event for changing the cursor can be linked to that
instead of the obsolete class.
The patch also adds code copied from Bug 33233 in order to make the
"waiting" cursor revert to the default if the user uses the back button
to return to the search form.
To test, apply the patch and go to Cataloging -> New from Z39.50
- Fill in a search term and click the submit button
- Your cursor should change to a "waiting" cursor while the search is
performed, before you're redirected to the results.
- From the results page, clicking the back button (or right-clicking the
page and choosing "Back") should return you to the search form and
your cursor should be a standard pointer.
Perform the same test from:
- Acquisitions -> Vendor -> Basket -> Add to basket -> From an external
source
- Authorities -> New from Z39.50/SRU
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 32627: Calculate expirationdate relative to waitingdate
Hold::set_waiting should calculate the MaxPickupDelay expiration date
based on waitingdate rather than the current date, to avoid resetting
the expirationdate on a hold that was already waiting.
To test:
1. Place a hold and check in the item so the hold will be set to Waiting
2. Confirm that the expiration date is correct based on the
ReservesMaxPickupDelay setting
3. Adjust your system clock to one day later
4. Check in the item again and confirm the hold
5. Note that the expiration date has changed
7. Apply patch and restart_all
8. Repeat steps 1-4. Confirm that the expiration date is calculated
correctly, and does not change when the item is checked in again
9. Reset your system clock to the current date
10. Set ExcludeHolidaysFromMaxPickupDelay to Use the Calendar
11. Add an upcoming holiday to the calendar
12. Repeat steps 1-4. Confirm the expiration date correctly accounts for
the holiday, and does not change when the item is checked in again
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch addresses the fact the invalid FK error might differ under
some circumstances. We could try to catch the exception adding another
case, but I think this pattern is cleaner and the authors didn't provide
a fix.
We can discuss it later, as this controller class has several things to
review.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Wed, 10 May 2023 13:33:53 +0000 (13:33 +0000)]
Bug 29185: (QA follow-up) Quote title search in GetCnumSearchURL
Test plan:
Disable UseControlNumber
Change biblio title to something like:
Hamlet or CHINESE_CHARS
where you add some nice Chinese chars.
Create a 765 looking for that title in another biblio record.
Without this patch, the link at detail page finds both records,
since it looks for ti-phr:Hamlet OR the Chinese chars.
With this patch, the link at detail uses quotes and finds only
one, since the OR is now part of the ti-phr search.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 29185: Display MARC tag 765 in OPAC and intranet XSLT
Test plan:
** For OPAC
[1] Pick a biblio record A as original entry, fill $001/$003.
[2] Pick another biblio record B as translation, add 765 with $t,
$a and $d. Put (orgcode)cnum from A into $w.
[3] Disable UseControlNumber.
[4] Goto OPAC detail page of B. Check link; should be title based.
[5] Enable UseControlNumber.
[6] Goto OPAC detail page of B. Check link; should incl orgcode and cnum.
[7] Edit B. Replace $w with cnum of A only.
[8] Goto OPAC detail page of B. Check link; should incl cnum only.
** For staff client
[9] Goto staff detail page of B. Check link again.
[10] Edit B. Set 765 ind2 to 8, fill $i.
[11] Goto staff detail page of B. You should see different label.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Wed, 15 Mar 2023 15:14:29 +0000 (15:14 +0000)]
Bug 29185: Groundwork: add template GetCnumSearchURL in Utils
Note for QA: Opened bug 33515 to see if we can use this same
function in a few other places too. Would probably reduce code
and increase consistency.
Test plan:
See next patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Thu, 23 Mar 2023 08:02:42 +0000 (08:02 +0000)]
Bug 29185: Facilitate searching for cnum
Instead of typing the case sensitive Control-number each time.
4 strikes instead of 15 on your keyboard. Wow! Gain of 73%.
Test plan:
Copy ccl.properties to /etc/koha/zebradb, restart Zebra and
search for cnum=SOME_ID in opac or intranet.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Tue, 9 May 2023 08:11:19 +0000 (10:11 +0200)]
Bug 33684: Make mandatory date fields required when editing a patron
Date fields in BorrowerMandatoryField are not required by the validation
form when a new patron is added or modified.
This is because the 'required' prop does not exist on the input element
when the flatpickr instance is created.
We should either add it in the DOM directly (tt), but it will require to
do it "manually" for each date fields, or add it when we add it to the
inputs. This patch implements the second option.
Test plan:
1. Add "dateofbirth" to syspref BorrowerMandatoryField.
2. Add patron and leave date of birth input field empty.
3. Save.
=> Form is not submitted and you are asked to fill in a date of birth
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
https://bugs.koha-community.org/show_bug.cgi?id=33648 Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Tue, 18 Apr 2023 13:13:12 +0000 (13:13 +0000)]
Bug 33557: Add LinkerConsiderThesaurus system preference
Bug 30280 added the ability to use multiple thesauri for authorities in Koha.
This is a large change, and many libraries use authorities in a ess strict manner.
This patch simply adds a preference, disabled by default, to enable this new feature
To test:
1 - Find or create a record with a 650 heading, second indicator 0 (LOC)
2 - Ensure this links to an authority in your system
3 - Disable AutoCreateAuthorities, enable CatalogModuleRelink
4 - Edit the heading to second indicator 2
5 - Save, the heading does not link
6 - Apply patch, updatedatabase, restart all
7 - Edit and save record again
8 - Heading should now link to the LOC authority, despite different second indicator value for source
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Mon, 27 Mar 2023 08:53:24 +0000 (08:53 +0000)]
Bug 33277: Adjust source file for zebra mappings
The previous patches adjusted the mappings directly - moving this
change to the correct build file
Not needed for sign off, but QA can test that nothing changes when rebuilding the files:
xsltproc etc/zebradb/xsl/koha-indexdefs-to-zebra.xsl etc/zebradb/marc_defs/marc21/authorities/authority-koha-indexdefs.xml > etc/zebradb/marc_defs/marc21/authorities/authority-zebra-indexdefs.xsl
Signed-off-by: Frank Hansen <frank.hansen@ub.lu.se> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 22 Mar 2023 00:33:23 +0000 (00:33 +0000)]
Bug 33277: (follow-up) Fix notdefined search for Zebra and ES
Signed-off-by: Frank Hansen <frank.hansen@ub.lu.se> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Tue, 21 Mar 2023 19:34:50 +0000 (19:34 +0000)]
Bug 33277: Search thesaurus for 'notspecified'
Signed-off-by: Frank Hansen <frank.hansen@ub.lu.se> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Tue, 21 Mar 2023 19:28:10 +0000 (19:28 +0000)]
Bug 33277: Add comments and missing thesauri
Signed-off-by: Frank Hansen <frank.hansen@ub.lu.se> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Tue, 21 Mar 2023 17:31:31 +0000 (17:31 +0000)]
Bug 33277: Support custom thesaurus authority with no 040 specified
Signed-off-by: Frank Hansen <frank.hansen@ub.lu.se> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Mon, 20 Mar 2023 15:44:17 +0000 (15:44 +0000)]
Bug 33277: Do not search using thesaurus when linking non 6XX fields
This patch sets thesaurus as undefined when linking any field except 6XX
This fixes the case where authrotiy records don't have the thesaurus defined
Consequently - this means that Koha does not support multiple thesaurus records
for authorities outside of subjects
i.e. Using the default linker, and having both an LCSH and Sears record for 'Shakespeare,William'
A 100 entry will find two results and the heading won't be linked. Previously we always linked to the LCSH
To test:
1 - Import the attached auths and biblio (from bug 33159 comment 24)
2 - Set system preferences:
RequireChoosingExistingAuthority - don't require
AutoCreateAuthorities - don't generate
CatalogModuleRelink - Do
LinkerKeepStale - Don't
LinkerModule - default
LinkerRelink - do
3 - Edit the imported bib
4 - Save it
5 - Headings are not linked except 600
6 - Apply patch
7 - Restart all
8 - Edit and save record
9 - Headings are successfully linked
Signed-off-by: Frank Hansen <frank.hansen@ub.lu.se> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Matt Blenkinsop [Tue, 18 Apr 2023 13:18:34 +0000 (13:18 +0000)]
Bug 33064: Update cypress tests
This patch amends Searchbar_spec.ts to account for the new licenses option
Test plan:
1) Run yarn cypress open
2) Select the Searchbar_spec.ts test
3) The test should pass
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Matt Blenkinsop [Tue, 18 Apr 2023 13:15:42 +0000 (13:15 +0000)]
Bug 33064: Add a licenses option to the searchbar
This patch adds a licenses option to the top searchbar
Test plan:
1) Apply patch
2) run yarn build
3) Navigate to the ERM module
4) Observe that the top search bar should have an option for licenses
5) Click on licenses in the left hand menu, the search bar should update to show licenses as the active search option
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Aleisha Amohia [Sun, 28 Aug 2022 22:21:59 +0000 (10:21 +1200)]
Bug 31479: Option to skip t/00-check-atomic-updates.t when building custom packages
This enhancement adds an option to skip the check for leftover atomic
updates when building custom packages. This is particularly useful for
Koha providers or anyone else building Koha packages manually.
In practice, this could be run like: sudo CUSTOM_PACKAGE=1
./debian/build-git-snapshot -r ~/debian -v 21.11.01git -d
This test plan should all take place within the shell.
0. sudo koha-shell kohadev
1. Run prove t/00-check-atomic-updates.t and confirm the test passes
2. Add a fake atomic update to installer/data/mysql/atomicupdate/ . You
can use the example from
https://wiki.koha-community.org/wiki/Database_updates#How_to_write_an_atomicupdate_file
3. Run prove t/00-check-atomic-updates.t and notice the test fails
4. Set the CUSTOM_PACKAGE environment variable so we can test this. You
can either set on the commandline (using export) or in /etc/environment
(remember to run source /etc/environment so the changes are accessed)
5. Run prove t/00-check-atomic-updates.t and the test should now pass.
Sponsored-by: Catalyst IT Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Julian Maurice [Thu, 14 May 2020 09:56:23 +0000 (11:56 +0200)]
Bug 25503: Add option to export items bundle contents in checkouts table
Test plan:
1. Enable system preference ExportCircHistory
2. Create an item bundle (see bug 28854 comment 458)
3. Check out the item bundle
4. In the checkouts table, check the box in column "Export",
choose export format 'MARC with items', check "Export items bundle
contents" and click on "Export" button
The exported file should contain the biblio and item created at step
2, but also the biblio and items that are part of the bundle
Signed-off-by: Marie-Luce <marie-luce.laflamme@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Marie-Luce <marie-luce.laflamme@inlibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
https://bugs.koha-community.org/show_bug.cgi?id=25508 Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Julian Maurice [Fri, 4 Nov 2022 08:53:51 +0000 (09:53 +0100)]
Bug 25503: Make _get_biblio_for_export test pass
Signed-off-by: Marie-Luce <marie-luce.laflamme@inlibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
https://bugs.koha-community.org/show_bug.cgi?id=25508 Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Julian Maurice [Fri, 4 Nov 2022 08:53:25 +0000 (09:53 +0100)]
Bug 25503: Add failing test for _get_biblio_for_export
Signed-off-by: Marie-Luce <marie-luce.laflamme@inlibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
https://bugs.koha-community.org/show_bug.cgi?id=25508 Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Julian Maurice [Fri, 4 Nov 2022 08:41:30 +0000 (09:41 +0100)]
Bug 25503: Make Koha::Exporter::Record tests pass with unimarc
Signed-off-by: Marie-Luce <marie-luce.laflamme@inlibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
https://bugs.koha-community.org/show_bug.cgi?id=25508 Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Wed, 3 May 2023 13:42:15 +0000 (15:42 +0200)]
Bug 28328: Adjust tests
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Wed, 3 May 2023 13:41:51 +0000 (15:41 +0200)]
Bug 28328: DBIC schema changes
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Wed, 3 May 2023 13:33:11 +0000 (15:33 +0200)]
Bug 28328: Extend biblioitems.lccn to longtext
Same sa issn and isbn, we want lccn to allow longer values.
Test plan:
Run the updatedatabase script to modify the DB structure
restart_all
Edit a bibliographic record and enter a long (more than 25 chars) lccn
Save
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Renvoize [Wed, 10 May 2023 06:37:55 +0000 (07:37 +0100)]
Bug 26403: Use accounts include in account management pages
This patch updates the credit and debit types management pages to use
the proper includes for handling system type translations. This is how
it should have been done in the first place on the original bugs that
introduced the management of these types but for some reason I think it
got dropped during the QA process leading to confusion around these
system types with their fixed descriptions.
To test:
1. Apply patch
2. Apply the translations
./misc/translator/translate install xx-XX
3. In the staff interface, go to Administration > Credit types
--> They should be translated
4. Go to Administration > Debit types
--> They should be translated
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Followed the test plan. Works as advertised. Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 26403: Move credit and debit types into translatable YAML files
This patch moves account debit and credit types, as well as the CASH
payment type, into YAML files under
installer/data/en/mandatory. This should make the debit and credit types
translatable (for new installations only).
To test:
1. Apply patch
2. Update po files
./misc/translator/translate update xx-XX
3. View the xx-XX-installer.po file
-->The default account debit and credit types (and cash payment type)
should be available to be translated
4. Translate the strings
5. Apply the translations
./misc/translator/translate install xx-XX
6. Load the new translated YAML files (with a fresh install, or by deleting
the values in the db and using ./misc/load_yaml.pl to load the files)
7. In the staff interface, go to Administration > Credit types
--> They should be translated
8. Go to Administration > Debit types
--> They should be translated
Signed-off-by: Magnus Enger <magnus@libriotech.no> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Sat, 15 Apr 2023 23:14:10 +0000 (23:14 +0000)]
Bug 33512: (QA follow-up) Remove 'Click to' from buttons
This is following recommendations from accessibility
guidelines. It being a link or button already indicates
that you need to click it. We don't need to spell it out.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Lucas Gass [Wed, 12 Apr 2023 22:28:06 +0000 (22:28 +0000)]
Bug 33512: Change text and add button classes on serial-edit page
To test:
1. Create a subscription
2. Make sure that you choose "Create an item record" when receiving the serial and associate it with a record.
3. Fill out the numbering pattern stuff and save the subscription.
4. Receive and change the status to arrived. Doing so will make the item subfields appear for editing.
5. Add some stuff, like a barcode, and Save.
6. Now, if you have made a mistake, you may want to edit the serial/item. Check the edit box and click 'Edit serials '
7. For your issue that has already arrived click 'Click to add item'. The item record from before appears.
8. Apply patch.
9. Try 6 & 7 again. The existing items should now read 'Click to edit item'
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Thu, 4 May 2023 07:06:07 +0000 (07:06 +0000)]
Bug 33671: Update POD, remove unneeded check in relationship->guarantor
[1] Update POD for $patron->guarantor_relationships
[2] Remove check from Patron::Relationship->guarantor
Test plan:
Run t/db_dependent/Koha/Patron.t
Run t/db_dependent/Patron/Relationships.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Thu, 4 May 2023 06:41:19 +0000 (06:41 +0000)]
Bug 33671: Fix for 30472 - Remove null-guarantors
These guarantors cannot be added. They are of no use.
NOTE FOR QA/RM: I do not think that it is needed to add a new
db rev for this change since it happens seldom. But if you think
that it is, just copy it to atomicupdate/change bugno.
Test plan:
[1] Check your table definition and modify it:
alter table borrower_relationships modify column `guarantor_id` int(11) NULL;
[2] Add an empty guarantor:
insert into borrower_relationships (guarantee_id,relationship) values (SOME_PATRON_ID,'father');
[3] Run the dbrev and verify that the inserted record has been removed.
[4] Check table definition with 'show create table borrower_relationships'.
You should see NOT NULL with guarantor_id.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Lucas Gass [Fri, 31 Mar 2023 16:53:24 +0000 (16:53 +0000)]
Bug 30621: Add author column to opac-readingrecord.tt
To test:
1. Have a patron with some checkout history.
2. Go to that patrons OPAC reading history page, notice author is listed in the same column as title. You cannot sort by author.
3. Apply patch and look again.
4. Now there should be an author column that allows patrons to sort by it.
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Fri, 28 Apr 2023 16:03:07 +0000 (16:03 +0000)]
Bug 25379: (QA follow-up) Adjust other occurrences and add line break
This updates the other occurrences and adds html_line_break to all
except the edit page - it seems html or raw doesn't affect the value of the textarea,
but moved to raw for consistency
To test:
1 - Add an HTML note to a patron, make sure to add a line break:
<h1>Testing</h1>
<h2>Newline</h2>
2 - Checkout to patron and return
3 - Confirm note shows correctly
4 - Add patron to a list
5 - Confirm note displays correctly
6 - Edit patron, confirm note field is correct
7 - Batch modify borrower
8 - Confirm note displays correctly in batch list
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Fri, 17 Mar 2023 21:36:23 +0000 (21:36 +0000)]
Bug 25379: Add raw filter to circulation note on checkin page
This is a consistency patch: we already allow adding HTML tags
to the patron circulation note and the contents display
correctly in the patron account and in the patron search results
in the staff interface. But the HTML tags are printed on the
checkins page.
To test:
* Add a circulation note including HTML tags to a patron
Example: <h1>This patron is great!</h1>
* Check an item out to this patron
* Verify that the note displays formatted in patron search results
* Verify that the note displays formatted in the patron record
* Return the item
* Verify the note shows the printed tags
* Apply patch
* Check item out again and check it in again
* Verify the note now displays correctly in list of checkins
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Sun, 16 Apr 2023 12:19:40 +0000 (12:19 +0000)]
Bug 32917: Fix sample notice for CHANGE_PASSWORD
We've identified 3 issues:
* Name of patron is not showing up in subject line
* Name of patron is now showing in notice text
* Notice is set to be HTML, but has no line breaks and uses no HTML tags
In the database update, these issues don't occur:
$dbh->do( q{
INSERT IGNORE INTO letter (module, code, name, title, content, message_transport_type) VALUES ('members', 'PASSWORD_CHANGE', 'Notification of password change', 'Library account password change notification',
"Dear [% borrower.firstname %] [% borrower.surname %],\r\n\r\nWe want to notify you that your password has been changed. If you did not change it yourself (or requested that change), please contact library staff.\r\n\r\nYour library.", 'email');
});
So this patch will make them match up:
* Remove HTML flag
* Update patron. to borrower. in message text
* Remove patron name from subject (it won't work even with the correct variables)
To test:
* Add an email address to your favourite sample user
* Make sure NotifyPasswordChange is set to "Notify"
* Update the sample user's password using the "change password" feature
* Verify a notice is shown in the notices tabs
Note: you won't see the line break issue there because of bug 30287
* Apply patch
* Recreate your database/run web installer so sample notices are loaded
* Repeat the test, it should generate a nice lookig notice now
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Sun, 16 Apr 2023 10:45:06 +0000 (10:45 +0000)]
Bug 33253: Turn off autocompletion for 2FA authentication code
The form for entering your authentication code shoudl not suggest
previous codes.
To test:
* Activate TwoFactorAuthentication
* Go to your patron account in staff
* More > Manage 2-factor authentication
* I used "Google authenticator" on my phone, so:
* Open app on your phone, add new and scan the QR code
* Enter activation code
* Log out of staff interface
* Log back in, you are now also asked for an authentication code
as second step
* Look up code in app, enter, get logged in
* Log out, log back in - the form now suggests the previous code
when you click on it
* Apply patch
* Reload things (restart_all on ktd)
* Verify that you no longer get the suggestion
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Fri, 31 Mar 2023 12:11:55 +0000 (14:11 +0200)]
Bug 32548: Replace while with map
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Fri, 31 Mar 2023 12:11:46 +0000 (14:11 +0200)]
Bug 32548: Add tests
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Thu, 29 Dec 2022 16:17:40 +0000 (16:17 +0000)]
Bug 32548: Make illrequestattributes available in ILL emails
Without this ILL module only provides very limited data to
be included in the notices sent about the request itself.
We have the columns illrequests, but not the illrequestattributes,
that often will contain the more useful information needed.
This patch enables to use values of the illrequestattributs using
[% illrequestattributes.<attributname> %] in the notices.
To test:
* Apply patch
* First you'll need to activate the ILL module and install a
backend to use it with. FreeForm was used for this test plan,
BLDSS is usually also good for testing.
See: https://wiki.koha-community.org/wiki/ILL_backends
* Also set up an SMTP server to use for notices and make
sure the email address is set in KohaAdminEmailAddress
and the user you are using for testing this with.
* Make sure your user has an email address and will receive
ILL notices by seleting them in the messaging preferences.
* Create an ILL request with the FreeForm backend for your user.
* On the ILL request detail page: "Display supplier metadata"
Pick some attributes you want to use in the notice
* Go to Tools > Notices and slips and edit ILL_REQUEST_UNAVAIL
* Add some of the attributes you picked. Example:
[% illrequestattributes.type %]
[% illrequestattributes.title %]
* Back to the ILL request detail page: Send notice to patron >
ILL request unavailable
* Go to your patron's account and check the notices tab
* The generated notice shoudl show and include the information
from the illrequestattributes you picked.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Janusz Kaczmarek [Wed, 22 Feb 2023 11:59:11 +0000 (12:59 +0100)]
Bug 33037: Koha does not display difference between enumchron and serialseq in record detail view (OPAC and intranet)
Patch 32555 tries to resolve the issue caused by bug 31313. But the way it is fixed seems to be
at least problematic. With patch 32555 we will never see the difference between
`serial`.`serialseq` and `items`.`enumchron` which is still intended in opac-detail.tt
(line ~ 1332) and [intranet] catalogue/detail.tt (line ~ 446). This is because
ITEM_RESULT.serialitem (in opac-detail.tt) and item.itemserial.serial (in catalogue/detail.tt)
refer to non-existing things. (and therefor the problem described in 32555 no longer emerge).
The original problem is caused by mixing up serialitem with serial in [opac-]detail.pl
and passing serialitem instead of serial to both templates.
To test:
1. Create a serial subscription
1.1. Go to Serials
1.2. Click on New subscription
1.3. Fill out the first form
- Vendor: leave empty
- Record: enter a record number
- Create an item record when receiving this serial
- When there is an irregular issue: Keep issue number
- Manual history: leave unchecked
- Call number: leave empty
- Library: Centerville
- Public/nonpublic note: leave empty
- Patron notification: None
- Location: None
- Collection: None
- Item type: Continuing resources
- Grace period: leave empty
- Number of issues to display: leave both empty
1.4. Click Next (and confirm you are not using a vendor)
1.5. Fill out the second form
- First issue publication date: 2023-01-01
- Frequency: 1/month
- Subscription length: issues 12
- Subscription start date: 2023-01-01
- Subscription end date: 2024-01-01
- Numbering pattern: Number
- Locale: leave empty
- Begins with: 42
- Inner counter: leave empty
1.6. Click Test prediction pattern
1.7. Click Save subscription
2. Click OPAC view: Open in new window.
3. Back in the staff interface tab, receive an issue
3.1. Click Receive
3.2. In Status, choose Arrived for No. 42
3.3. IN ITEM DETAILS BELOW CHANGE h - Serial enumeration / chronology
from No. 42 to some different string
3.3. Click Save
4. Check the items in OPAC and Intranet – you will see only the value from the
item $h subfield (enumchron) instead of desired "enumchron -- serialseq"
in case of a difference between `serial`.`serialseq` and `items`.`enumchron`.
5. Apply this patch
6. Repeat 4
7. Check the items in OPAC and Intranet – you should now see the desired
"enumchron -- serialseq" string.
8. Sign off
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Nick <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Thu, 4 May 2023 11:14:29 +0000 (11:14 +0000)]
Bug 33672: Don't show item group holds on OPAC if not enabled
This patch adds a check of the syspref 'EnbaleItemGroupHolds' to the
opac request form
To test:
1 - Enable 'EnableItemGroups' system preference
2 - On staff client, view a record details
3 - Go to 'Item groups' tab, add a enw group
4 - On holdings tab, select one or more items and add to group
5 - View record in OPAC
6 - PLace a hold
7 - Note group option is visible
8 - Apply patch
9 - Refresh, no group option
10 - Enable 'EnableItemGroupHolds' system preference
11 - Refresh opac page, note group option is visible
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Sun, 16 Apr 2023 01:06:53 +0000 (01:06 +0000)]
Bug 22375: (follow-up) Format even more due dates consistently
To test:
Create some checkouts in future and past, make sure to include
some with a time != 23:59.CirculateILL
Verify that the due date is displayed correctly on:
* Catalog detail page > Items tab > Checkout status
* Circulation start page > Renew > Renew one of your checkouts > dialog message
* ILL request page: requires ILL setup and CirculateILL system preference
* Patron acccount in staff > Print > Print summary
* Catalog detail page > Holds > search for patron > due date on checked out items
* Recalls:
* Activate UseRecalls system preference, set up circulation rules to allow recalls
* Checkout an item to another user
* In the OPAC, place a recall on that record with yor use
* Check "Recall a specific item"
* Verify due date in item list
* Place recall on checked out item
* Patron account in OPAC > Recalls history (due date might have been changed through recall)
* OPAC patron account > Summary > Overdue tab
* Self checkout:
* Activate WebBasedSelfCheck
* Go to <opacbaseurl>/cgi-bin/koha/sco/sco-main.pl
* Log in > Tab checkouts
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
JD amended patch - removed 'fda' Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Josef Moravec [Wed, 20 Feb 2019 12:41:04 +0000 (12:41 +0000)]
Bug 22375: Format due date consistantly
Test plan:
Make some daily an hourly checkouts and confirm the right display
(hourly with hours and minutes, daily only date) of due date on these
places:
1) catalogue -> checkout history
2) circulation -> overdues with fines
3) <already fixed>
4) circulation -> pending on site checkouts
5) patrons circulation history
6) opac -> account summary -> relatives checkouts
Note: I suspect the moremember-receipt.tt template is not used anymore Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Thu, 4 May 2023 13:59:03 +0000 (13:59 +0000)]
Bug 33302: (QA follow-up) Rephrase errors to be more user friendly
These error message will show within the patron account. The goal
of this patch is to make them a little more user friendly avoiding
'patron' and 'hold group' terminology :)
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Tue, 28 Mar 2023 11:31:42 +0000 (11:31 +0000)]
Bug 33302: Send and display errors when a hold cannot be placed on the OPAC
This patch changes opac-reserve.pl to return the error(s) when placing
a hold as a pipe delimited list which is then translated to a message for the
user
To test:
1 - Find a record with items available on the opac
2 - Click 'place hold' and set things up, but do not confirm
3 - In staff client, do something to make hold invalid:
- Make item damaged
- Make library not a pickup location
- Place other holds for patron up to limit
- etc.
4 - Confirm hold on OPAC
5 - You are sent to patron's account, hold is not placed
6 - There is little or no message to explain why
7 - Apply patch
8 - Repeat
9 - Now errors are clear
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com> Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Owen Leonard [Tue, 2 May 2023 17:24:08 +0000 (17:24 +0000)]
Bug 33622: Notice content does not show on default tab if TranslateNotices enabled
This patch fixes a conflict between the template-generated markup and
Bootstrap JS which were both competing to show the correct default tab.
It's simpler to rely on JavaScript.
To test, apply the patch and enable the TranslateNotices system
preference if necessary.
- Go to Tools -> Notices & slips
- Go to edit any notice e.g. DUEDGST
- The page should load with the "Default" tab selected by default.
- Enter unique titles and contents under each tab to confirm that the
data you see under the "Default" or "English (en)" tab is being shown
in the right place.
- Save your modified notice and edit it again to confirm that the tabs
correspond correctly to your data.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Mon, 17 Apr 2023 19:24:18 +0000 (19:24 +0000)]
Bug 33206: Unit test
Signed-off-by: Nick <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Janusz Kaczmarek [Sat, 11 Mar 2023 16:03:10 +0000 (17:03 +0100)]
Bug 33206: Bad title__sort made of multifield 245
In MARC 21, having title search field defined in mappings.yaml as 245abp
(more than one subfield), the Koha generated title__sort will have not
only $a, but also other subfields cut by ind2 characters, i.e.:
This is because copying an array of pointers in Perl causes you to
point to the same (anonymous) element. Therefore, the intended
modification only for subfield "a"
(Koha/SearchEngine/Elasticsearch.pm, ~line 1157) causes in fact
modification for all the subfields sharing the same mapping
definition and introduction of the nonfiling_characters_indicator to
all subfields 245 when processing 245abp. And this is obviously not
what is intended and results (in some cases) with bad sort order
when sorting by titles.
Test plan
=========
1. Have a standard Koha ES installation. In mappings.yaml
you should have 245abp for title search field.
2. Insert / download / modify a record with 245 $b or $p,
an article at the beginning of the title, and correctly
set 2nd indicator. For instance:
Signed-off-by: Nick <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 33569: Fix sort by relevance in catalog search
When ordering catalog search by relevance from advanced search, this is not visible in sort order combobox in staff interface.
This is because sort by relevance is a special case not using sort
order.
This patch add a new method C4::Context->default_catalog_sort_by to use
in both staff interface and OPAC.
Test plan :
1.0) On staff interface
1.1) Define system preferences defaultSortField = 'relevance' and defaultSortOrder = 'descending'
1.2) Perform a catalog search from main page on any term, ie 'perl'
=> You see in sort combobox 'relevance' selected (with a check icon)
1.3) Perform an advanced search on any term, ie 'perl', with sort by relevance
=> Without patch : you see in sort combobox 'relevance' not selected (no check icon)
=> With patch : you see in sort combobox 'relevance' selected (with a check icon)
2.0) On OPAC
2.1) Define system preferences OPACdefaultSortField = 'relevance' and OPACdefaultSortOrder = 'descending'
2.2) Perform a catalog search from main page on any term, ie 'perl'
=> You see in sort combobox 'relevance' selected
3.0) Run prove t/Context.t
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes `filter_by_lates` use the `filter_by_active` method
instead of an ad-hoc query filter. It has the advantage that it
considers standing orders too.
No behavior change, tests should still pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Wed, 3 May 2023 13:18:13 +0000 (15:18 +0200)]
Bug 33653: Never consider received orders as late
We should not list received orders on the late orders page.
Test plan:
* Create a basket
* Create a normal order (not from a subscription, no standing order)
* Leave estimated delivery date empty
* Close the basket
* Create a new invoice and receive the order line
* Go to acq > late orders
* Verify the order is not in the list
* Set filter for 'To' date into the future, i.e. 01/01/2025
=> Without this patch the order shows up
=> With this patch applied the received order does not show up
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Thu, 20 Apr 2023 16:02:09 +0000 (16:02 +0000)]
Bug 33576: Index records after import transaction is committed
This patch simply moves our indexing call after the transaction is committed so
that the job will exist in the DB when called.
To test:
1 - Have Koha using Elasticsearch
2 - Stage and import a file of records
3 - View the job in Admin->Manage jobs
4 - Note it is not finished
5 - Check log: /var/log/koha/kohadev/es-indexer-output.log
6 - Note: [WARN] No job found for id=###
7 - Apply patch
8 - Stage and import
9 - Note no error in log
10 - Note successful completion of indexing job
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Lucas Gass [Tue, 25 Apr 2023 23:11:17 +0000 (23:11 +0000)]
Bug 33613: Use prop() to evaluate checkbox
To test:
1. Have an item with a replacement cost checked out to a patron
2. Set the ClaimReturnedChargeFee sys pref to "Ask if a lost fee should be charged"
3. Make a claim and check the box for charging.
4. Claim happens but no charge occurs.
5. Apply patch and try again.
6. A charge should now occur.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Hinemoea Viault <hinemoea.viault@inlibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Wed, 5 Apr 2023 12:27:27 +0000 (12:27 +0000)]
Bug 33412: Fix comparison when checking for overlay framework
TO test:
1 - Cataloging -> Export catalog data
2 - Export a record fom your catalog
3 - Cataloging -> Stage record for import
4 - Import the record, use Record matchign rule: KohaBiblio (999c)
5 - Stage, view batch
6 - Record should match the one that was exported
7 - When replacing record use this framework, choose a different value than current framework of record
8 - Import this batch
9 - View and edit record - note framework did not change
10 - Apply patch
11 - Restart all
12 - Repeat 4-8
13 - View and edit record, confirm framework has changed
14 - Sign off
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Thu, 27 Apr 2023 13:02:52 +0000 (13:02 +0000)]
Bug 33611: Ensure dt_from_string always returns a new object
This patch alters dt_from_string to pass a cloned object if called
on an existing date time object
This resolves an issue where a holds reserve date was being altered when
the default expiration date was set
To test:
1 - Set DefaultHoldExpiration to Set
2 - Set DefaultHoldExpirationPeriod to 365
3 - Set DefaultHoldExpirationunitOfTimeToDays
4 - Place a hold
5 - Note reserve date is 1 year in the future, same as expiration
6 - Apply patch
7 - Restart all
8 - Place another hold
9 - Note reserve date is set to today
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Hinemoea Viault <hinemoea.viault@inlibro.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Nick Clemens [Thu, 27 Apr 2023 13:02:24 +0000 (13:02 +0000)]
Bug 33611: Unit test
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Hinemoea Viault <hinemoea.viault@inlibro.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 33513: Remove whitespace in batch report lists
Bug 32368 added whitespaces, remove them.
To test:
1 - Create a report like:
SELECT biblionumber FROM biblio
2 - Run it
3 - Try the various options from the 'Batch operations' button
4 - The operations don't find the biblios
5 - Create a report like:
SELECT cardnumber FROM borrowers
6 - Run it
7 - Test the batch operations
8 - They fail
9 - Apply patch
10 - Run each report again and test batch operations
11 - They work!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Fri, 21 Apr 2023 19:46:19 +0000 (19:46 +0000)]
Bug 33586: Fix sequence of fields for memberresultst in table configuration
The sequence of options actually matters, not the name.
Library and category were switched, this patch fixes it and
now it should all hide/show as expected:
* Go to administration > table configuration
* Hide library in memberresultst
* Go to patron search and search
* Verify that category was hidden instead
* Apply patch
* Verify now label and columns for library and category
match with configuration.
Signed-off-by: Lisette Scheer <lisette.scheer@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
David Nind [Thu, 4 May 2023 20:25:01 +0000 (20:25 +0000)]
Bug 33673: Change "global system preferences" to "system preferences"
The Koha Community normally refers to "global system preferences"
as just "system preferences".
This updates the staff interface and other occurences to refelect
this, including:
- Administration > Global system preferences and the description
- Patrons > [a patron] > More > Set permissions > Manage Koha
system settings > Manage global system preferences
(manage_sysprefs)
- The installer files and the database (permissions table)
Test plan:
1. Note that in the staff interface "Global system preferences"
is dispalyed in two places:
1.1 Administration: Go to Administration. There is a section
called "Global system preferences" with a description
and a search box.
1.2 User permissions: View the details for a patron > More >
Set permissions > expand 'Manage Koha system settings' >
scroll down to 'Manage global system preferences
(manage_sysprefs)'
2. Apply the patch.
3. Update the database.
4. Revisit the pages in step 1 - these should now show as
"System prefereneces" or "system preferences" as appropriate.
5. Sign off!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Magnus Enger <magnus@libriotech.no>
I agree with this change, consistency is good. As far as I can see
this patch cathes all the occurrences of "global". Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Sun, 9 Apr 2023 11:44:21 +0000 (11:44 +0000)]
Bug 33356: Add mana-kb hint to reports start page
An alternate placement of the Mana KB hint on the reports start page.
To test:
* Go to Reports module
* Verify the hint shows when you haven't decided on Mana KB
* Once you set yes or no, it will no longer show
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Philip Orr [Tue, 25 Apr 2023 10:34:09 +0000 (10:34 +0000)]
Bug 28315: Remove duplicate function definition
This patch removes the unnecessary second definition of the JS function PopupMARCFieldDoc from addbiblio.tt.
To test:
1. Apply the patch
2. Check that addbiblio.tt contains only one function definition for PopupMARCFieldDoc
3. Navigate to "Cataloging" -> "Add MARC record"
4. Check that after clicking on the question mark symbol next to any MARC field, the loc description of that MARC field is opened in a new tab
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
projects / koha.git / log