Some Z39.50 server may use the MARC-8 encoding, which uses separated
diacritics. By forcing a normalization, all imported records will have
combined diacritics.
Records with separated diacritics might not show up in Zebra searches if
the search terms use accented characters.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
http://bugs.koha-community.org/show_bug.cgi?id=8610 Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
checked it still works after the patch with UNIMARC and BNF server (that
provide utf-8 records)
A subroutine was not being imported by C4::ImportBatch (ironic, no?)
so this patch makes the call fully-qualified. This patch also cleans
up two warnings in C4::Auth that are raised when logged in as the
database user.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Joseph Alway [Thu, 20 Sep 2012 17:39:28 +0000 (12:39 -0500)]
Bug 8680 Z39.50 ISBN Search is problematic and there is a missing ISSN field.
The changes here are duplicate fixes.
The cataloguing directory had the same bugs as the acqui directory.
The bugs in the cataloguing files of the same name were fixed in Bug 8550.
The bugs in the acqui files had not been fixed.
This will fix Bug 8680 which is in the Acquisitions Module.
Changes to the z3950_search.pl file:
Rather than treating ISBN and ISSN as the same, this patch breaks
them out into separate parts of the query, as well as changing
the truncation attribute to enable right truncation (the correct
behavior for the ISBN field in MARC21, and valid behavior in
UNIMARC).
Changes to the z3950_search.tt file:
Sometime in 2009 or so, the ISSN field was removed from the Z39.50 search
page, and the ISBN field replaced with a combined ISBN/ISSN field. Since
this breaks ISBN search for most Z39.50 targets (due to the
differing treatment of ISBN vs. ISSN), this is a bug not a feature.
Signed-off-by: Marc Veron <veron@veron.ch>
Works as expected.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 5409 - Call number is not show on Opac search result page.
Fixes Bug 5409, Modified the definition of 'OPACItemsResultsDisplay' in systempreferences and changed the code in opac-search.pl file for 'OPACItemsResultsDisplay'.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Meenakshi.R [Fri, 15 Jun 2012 05:40:59 +0000 (11:10 +0530)]
Bug 5409 - Call number is not show on Opac search result page.
Fixes Bug 5409, Set the syspref value to 1 if it is itemdetails and 0 if it
is statuses, leaving it alone if it is already 1 or 0 and change the type
of the syspref to YesNo.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Amit Gupta [Mon, 15 Nov 2010 10:53:49 +0000 (16:23 +0530)]
Bug 5409 - Fix call number not shown on opac search result page
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
MJ Ray [Fri, 7 Sep 2012 14:17:05 +0000 (15:17 +0100)]
circ/circulation.pl: force issuedate to a string to fix bug 8738
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Installed DataTime version 0.53, verified the error occurs.
Applied patch, verified patch removes the error.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Owen Leonard [Mon, 24 Sep 2012 14:47:27 +0000 (10:47 -0400)]
Bug 8811 - can't run report after saving
The fix for Bug 7993 removed some lines from guided_reports.pl
which passed a new report's name and id to the template after
saving. For some reason this was removed, making it impossible
to run or edit a new report immediately after saving.
This patch adds back that part of the script which passes those
variables to the template. Before this patch, after adding a new
SQL report you would not see a "run this report" link. The
"run this report" and "edit" buttons in the toolbar would not
work. After applying the patch these should work.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested creating reports and was able to run them after saving.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Owen Leonard [Wed, 26 Sep 2012 12:59:45 +0000 (08:59 -0400)]
Bug 8827 - YUI CSS files no longer found on Yahoo servers
This patch removes the [% yuipath %] variable from the link
to the YUI CSS files in the OPAC and adds a hard-coded path
to the local files.
To test, set your yuipath system preference to "from Yahoo's
servers," clear your browser cache, and view the OPAC. The
style and layout should look the same as if your yuipath
preference were set to "local."
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Fixes broken display.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
After the changes to YUI path the build process is broken. For testing this I had
to set the build process to ommit the tests as there are some db_dependent test being
called (which failed).
Note: Even when this is fixed, there are still issues with some files missing
dh_install: etc/koha/searchengine/solr/config.yaml exists in debian/tmp but is not installed to anywhere
dh_install: etc/koha/searchengine/solr/indexes.yaml exists in debian/tmp but is not installed to anywhere
dh_install: etc/koha/solr/indexes.yaml exists in debian/tmp but is not installed to anywhere
dh_install: missing files, aborting
make: *** [binary] Error 2
dpkg-buildpackage: error: fakeroot debian/rules binary gave error exit status 2
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Please note that debian/rules *must* use tabs. If you have a git hook
that automatically replaces tabs with spaces, please undo those changes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 7963 Parallel HTTP requests when checking URLs
Current script check-url.pl checks URL found in 856$u by sending HTTP
requests, one by one. The next request can't be sent before the previous
one get a result, which can be very slow for dead URL. I propose a new
script which send multiple requests simultaneously which improve
drastically URL checking execution time.
This script is based on AnyEvent and AnyEvent::HTTP CPAN modules.
Add new dependencies AnyEvent & AnyEvent::HTTP.
See doc: perldoc check-url-quick.pl
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Owen Leonard [Thu, 23 Aug 2012 15:49:38 +0000 (11:49 -0400)]
Bug 8449 - Improve wording and styling for "cancelled holds" on Holds Awaiting Pickup screen
This patch re-implements and adapts the changes dcook@prosentient.com.au
submitted in a patch which no longer applies. I have changed the
"alert" style messages to "message" style to match the style
which is applied to "hold found" messages elsewhere.
I have also revised the language in a way that I think is more
clear and accurate.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Mason James [Tue, 8 May 2012 04:59:20 +0000 (16:59 +1200)]
Bug 7589 - tinymce editor broken in .deb packages - in 'en' templates
this patch fixes a glitchy symlink to tiny_mce
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Note that you have to *remove* koha-common then install fresh in order
to recreate the symlink.
VERY IMPORTANT!!! debian/rules MUST USE TABS. USE -n WHEN COMMITING
THIS PATCH, AND DO NOT REPLACE TABS WITH SPACES. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
David Cook [Tue, 17 Jul 2012 01:33:35 +0000 (11:33 +1000)]
Bug 8454 - Holds to Pull : Show pull list on load. Otherwise, it looks like the pull list is empty.
Currently, when you click "Holds to pull" from the Circulation menu, the only thing that you see is a white screen and a side navigation bar that says "Refine Results".
Since there appear to be no results to refine, the holds to pull list appears completely empty. Staff have to know to click "Submit" on the "Refine Results" form to get anything.
I propose that we have the "run_report" flag set to ON for the initial load. The report uses the default 2 days mentioned in the "Refine Results" form, so there is continuity across the board.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
David Cook [Tue, 17 Jul 2012 01:33:35 +0000 (11:33 +1000)]
Bug 8454 - Holds to Pull : Show pull list on load. Otherwise, it looks like the pull list is empty.
Currently, when you click "Holds to pull" from the Circulation menu, the only thing that you see is a white screen and a side navigation bar that says "Refine Results".
Since there appear to be no results to refine, the holds to pull list appears completely empty. Staff have to know to click "Submit" on the "Refine Results" form to get anything.
I propose that we have the "run_report" flag set to ON for the initial load. The report uses the default 2 days mentioned in the "Refine Results" form, so there is continuity across the board.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 8744: Thesaurus in authorities should not lock fields
Although fields in the authority editor should support thesaurus
control, they should never be locked, as authority records commonly
refer to other records that may not be in use locally (and therefore
might not be in the authority file).
Test plan:
1) Make sure a 5xx field in one of your authority frameworks is
thesaurus-controlled.
2) Note that you cannot edit the field directly.
3) Apply patch.
4) Note that you can now edit the field irectly.
Signed-off-by: wajasu <matted-34813@mypacks.net> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
David Cook [Fri, 10 Aug 2012 02:31:30 +0000 (12:31 +1000)]
Bug 8585 : Add System Preference to specify Holds to Pull List Start Date
Currently, Koha creates a default value of 2 days ago (-2) for the start date of the Holds to pull List. This system preference allows users to specify their own default start date for this list, since users might not want to have to manually change the date all the time when they already know the set date period they want to view.
The system preference value is specified as a positive integer, which is then passed as a negative integer in the handler script. This saves users from having to include a qualifer to the sys pref value.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Fri, 7 Sep 2012 05:34:04 +0000 (13:34 +0800)]
Bug 8737 - Incorrect icon at login in staff client
Added the following missing code to ensure the correct icon
is used when logged out:
IntranetFavicon => C4::Context->preference('IntranetFavicon')
This was added into an existing $template->param() call.
Not to be confused with the koha logo on the login page, the
icon is a 16x16 pixel graphic in the browser tab. The default
is found at .../intranet-tmpl/prog/en/includes/favicon.ico.
If the "IntranetFavicon" system preference is set, it should be
used by the staff client regardless of login state. It was not
being used in the "AUTH rejected" section of Auth.pm, but the
OpacFavicon variable was being set. This explains why the
"OpacFavicon" system preference works for the OPAC client, but
not the staff client upon logout.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Owen Leonard [Thu, 6 Sep 2012 19:21:03 +0000 (15:21 -0400)]
Bug 8711 - alternating colors messed up on reports
Patch adds the "zebra-striping" option to the
table sorter initialization and changes the row
color CSS to match the tablesorter's to prevent
conflicts.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Add a warning if a Z39.50 search is started from biblio edition page.
Warn the user that the current biblio record might be overwritten by
this action.
http://bugs.koha-community.org/show_bug.cgi?id=8583 Signed-off-by: Marc Veron <veron@veron.ch>
Woks as expected. I prefer this solution with an explicit warning,
since several times I acidentally changed a record :-)
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Created file with biblionumbers for bibs with and without items.
Only the bibs without items were deleted.
Jonathan Druart [Thu, 30 Aug 2012 13:31:14 +0000 (15:31 +0200)]
Bug 7992: New plugin stocknumberAV
Bugzilla description (from delaye):
1 / Create a list of authorised values(INVENTORY_NUMBER). In which the
code is the prefix and the description the last number assigned.
2/A space between the prefix and number.
3 / From a holding record, after indicate the prefix when you click on
the plugin -> koha search the last number from authorised values
assigned in the list and increment n +1 level meter
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Works as advertised (see provisos below). Tested the following:
1) INVENTORY category has only authorised value 'PR' => PR prefix filled
in, everything else gives an error.
2) INVENTORY category has two authorised values, both work.
3) INVENTORY category has no authorised values, nothing is incremented
4) Barcode contains numbers, nothing is changed.
Two potential gotchas (neither of them significant enough to warrant
changing, in my opinion):
1) Prefixes must consist only of uppercase alphabetical characters.
2) Negative numbers are padded with zeros to the left of the negative
sign.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Mark Tompsett [Thu, 30 Aug 2012 07:06:07 +0000 (15:06 +0800)]
Bug 8350: warning in logs when searching for nonexistent ISBN
Searching for a 10 or 13 digit numeric string that does not exist in
one's catalog will fail to affect SQL statement correctly
in C4::Breeding. Moved string substitution, which was triggering error
when search was undefined, and fixed if statements accordingly.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 8818: make sure we load modules before using them
An eval { eval "require $module;" }; was replaced with
eval { eval { require $module; }; }; which is a no-op, meaning that
the linker was not getting loaded, and the catalog module was throwing
up a big nasty error every time someone tried to save a record with a
heading. This patch replaces the require with can_load from
Module::Load::Conditional, which is PBP-friendly, and offers equivalent
functionality.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Robin Sheat [Fri, 28 Sep 2012 23:34:32 +0000 (11:34 +1200)]
Bug 7642 - fix the lost display of tag sizes
This fixes the display of different sized words for differently popular
tags. It is a bit of a refactor of that part of the system, moving
logic to more sensible places (and removing an unused method on the
way.)
Note that it isn't an attempt to reproduce what was there previously,
just to do something similar, and in an easier to change fashion.
Sponsored-By: New Zealand Educational Institute Signed-off-by: Marc Veron <veron@veron.ch>
Works as expected.
Kyle M Hall [Tue, 17 Jul 2012 13:42:59 +0000 (09:42 -0400)]
Bug 3387 - WITHDRAWN items shouldn't check in
Adds a system preference BlockReturnOfWithdrawnItems to control
whether or not Koha should allow a withdrawn item to be returned
or not.
Also fixes the behavior where Koha will attempt to use a withdrawn
item to fill a hold.
Test Plan:
1) Set BlockReturnOfWithdrawnItems to "Block" ( this is the default )
2) Check an item out to a patron
3) Mark item as withdrawn
4) Attempt to return the item, you should still see the item on the
borrower's record
5) Set BlockReturnOfWithdrawnItems to "Don't Block"
6) Attempt to return the item, you should see the item is no longer
on the borrower's record.
Bug 8581: don't display parentheses when we don't have a type
Prior to this patch, see also references in certain authority records
(most notably GND records) were being followed by empty parentheses in
the search results display. This patch resolves that problem.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Fixes several perlcritic complaints, and some overflow in the
configuration page. Also notes that Did You Mean is not yet
enabled on the staff client.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Sorry about the problematic last attempt at uploading. I missed a
patch when squashing. It is now included.
When working with hierarchical subject headings, it is sometimes helpful
to do a search for all records with a specific subject, plus
broader/narrower/related subjects. This patch adds a suggestion plugin for
these "exploded" subject searches to Koha. Note that this patch depends on
both bug 8211 AND bug 8209.
To test (NOTE: this test plan covers both 8211 and 8726):
1) Make sure you have a bunch of hierarchical subjects. I created
geographical subjects for "Arizona," "United States," and "Phoenix,"
and linked them together using 551s, and made sure I had a half
dozen records linking to each (but not all to all three).
2) Do a search for su-br:Arizona (or choose "Subject and broader terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "United States"
3) Do a search for su-na:Arizona (or choose "Subject and narrower terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "Phoenix"
4) Do a search for su-rl:Arizona (or choose "Subject and related terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona," the
records with the subject "United States," and the records with the
subject "Phoenix"
5) Ensure that other searches still work (keyword, subject, ccl,
whatever)
6) Use "Did you mean?" page in admin section to enable ExplodedTerms
plugin
7) Do a keyword search on the OPAC, confirm that searching for exploded
terms is suggested.
8) Do a subject search on the OPAC, confirm that searching for exploded
terms is suggested.
9) Do a non-keyword, non-subject search on the OPAC, confirm that
searching for exploded terms is NOT suggested.
10) Disable ExplodedTerms plugin and enable AuthorityFile plugin.
11) Do search on OPAC, confirm suggestions are made from authority file.
12) Sign off
Signed-off-by: wajasu <matted-34813@mypacks.net> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Split into two patches. This patch includes only the jQueryUI upgrade
When working with hierarchical subject headings, it is sometimes helpful
to do a search for all records with a specific subject, plus
broader/narrower/related subjects. This patch adds a suggestion plugin for
these "exploded" subject searches to Koha. Note that this patch depends on
both bug 8211 AND bug 8209.
To test (NOTE: this test plan covers both 8211 and 8726):
1) Make sure you have a bunch of hierarchical subjects. I created
geographical subjects for "Arizona," "United States," and "Phoenix,"
and linked them together using 551s, and made sure I had a half
dozen records linking to each (but not all to all three).
2) Do a search for su-br:Arizona (or choose "Subject and broader terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "United States"
3) Do a search for su-na:Arizona (or choose "Subject and narrower terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "Phoenix"
4) Do a search for su-rl:Arizona (or choose "Subject and related terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona," the
records with the subject "United States," and the records with the
subject "Phoenix"
5) Ensure that other searches still work (keyword, subject, ccl,
whatever)
6) Use "Did you mean?" page in admin section to enable ExplodedTerms
plugin
7) Do a keyword search on the OPAC, confirm that searching for exploded
terms is suggested.
8) Do a subject search on the OPAC, confirm that searching for exploded
terms is suggested.
9) Do a non-keyword, non-subject search on the OPAC, confirm that
searching for exploded terms is NOT suggested.
10) Disable ExplodedTerms plugin and enable AuthorityFile plugin.
11) Do search on OPAC, confirm suggestions are made from authority file.
12) Sign off
Signed-off-by: wajasu <matted-34813@mypacks.net> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Split into two patches. This patch includes only the functionality.
Bug 7351 : feature that allows to delete a range of dates
Four new options, one for single holidays, one for the repeatable holidays.
One to create exceptions on a range of dates, one to delete exceptions in a range of dates.
Note that the exceptions are not deleted if you delete a range of repeatable dates.
But if you delete a range of single holidays the exeptions inside will be deleted.
Signed-off-by: Stephane Delaye <stephane.delaye@biblibre.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Mark Tompsett [Tue, 18 Sep 2012 05:15:18 +0000 (13:15 +0800)]
Bug 8780 - Lower dependency version for DateTime::TimeZone
The fresh install of Debian, with the debian.koha-community.org
repository, only has version 1.20 by default. As only the most
basic functionality is being used, this version number should be
lowered from 1.26 to 1.20 in ./C4/Installer/PerlDependencies.pm
to make git installations cleaner.
Signed-off-by: wajasu <matted-34813@mypacks.net> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This commit adds support for displaying authority hierarchies for all
flavours of MARC, not just UNIMARC. Display now uses the jQuery
jstree plugin, selected with the help of Owen Leonard, resulting in a
much faster experience for users.
Be aware that the jstree file uses tabs rather than 4-space indentation,
which I left as-is so as to make it easier to integrate upstream
releases in the future.
To test:
1) Enable the AuthDisplayHierarchy syspref
2) Create authority records with a hierarchy of see also fields
(in MARC21/NORMARC, you'll be using 5xx fields for this, with a
subfield $w=g for broader terms and subfield $w=h for narrower
terms)
3) View the authorities in the OPAC, noting the hierarchical view at
the top of the page.
This initial patch does not create bidirection linkages from
unidirectional links in MARC21 authorities. This means that when moving
up the authority hierarchy, lower levels will disappear. This is
intentional, as the first patch is intended merely to ensure that
AuthDisplayHierarchy functions the same for all marcflavours. A future
patch will add a cron job to generate the bidirectional linkages, once
we are sure that the hierarchy functionality for UNIMARC and
MARC21/NORMARC coexists peaceably.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Resolved conflicts in updatedatabase.pl, sysprefs.sql and in one of
the CSS files.
Test plan:
1) Run t/AuthoritiesMarc.t
New tests complete without any errors.
2) Make sure updatedatabase works correctly.
Update works nicely, new system preference is also added to syspref.sql
3) Make sure new terms are translatable.
Created new po files for de-DE and checked for new terms.
All translations appear correctly.
4) Make sure everything works with AuthDisplayHieararchy OFF
- Add authority
- Edit authority
- Delete authority
5) Test feature with AuthDisplayHieararchy ON
- Add authority
- Edit authority
- Delete authority
6) Add a couple of hierarchically linked authorities
Note: links have to be created in both directions
Example:
151 $aGermany
551 $a Baden-Württemberg $w h
151 $aBaden-Württemberg
551 $a Konstanz $w h
551 $a Germany $w g
151 $aKonstanz
551 $a Baden-Württemberg $w g
551 $a Fürstenberg $w h
551 $a Paradies $w h
151 $a Fürstenberg
551 $a Konstanz $w g
151 $a Paradies
551 $a Konstanz $w g
Tree shows up nicely above the authority record
- in staff
- in OPAC
- on the normal view tab
- on the MARC view tab
7) Checking the logs for warnings
- no Javascript errors or warnings
- no warnings or errors in log files
Jonathan Druart [Fri, 24 Feb 2012 15:24:05 +0000 (16:24 +0100)]
Bug 5335 - More granular VAT
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com> Signed-off-by: Joy Nelson <joy@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>