Jonathan Druart [Mon, 23 Feb 2015 16:09:20 +0000 (17:09 +0100)]
Bug 9742: Does not display the popup on creating new record
The new confirmation on starting a z39.50 serach in cataloguing always
pops up, even when you are working on a new record that has not been
saved yet.
Test plan:
1/ Edit an existing record, click on the Z3950 search button, confirm
the popup appears.
2/ Create a new record, click on the Z3950 search button, confirm
the popup does not appear.
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected, Gustavo (librarian) convinced me that "it doesn't
hurt that much" with the test for new record. Happy easter :-D
Owen Leonard [Tue, 9 Dec 2014 15:01:12 +0000 (10:01 -0500)]
Bug 13315 [Follow-up] Add feedback for last item checked out to circulation.pl
This patch changes the position and styling of the information about the
last checkout so that it is grouped with the checkout form itself,
placing the message in a more visible position, especially for patrons
with a lot of information in the right-hand messages column which might
push the checkouts table down offscreen.
To test, apply the patch and clear your browser cache in order to
refresh the main CSS file.
Check out an item and confirm that a message is prominently displayed.
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 20 Nov 2014 17:39:21 +0000 (12:39 -0500)]
Bug 13315 - Add feedback for last item checked out to circulation.pl
It seems that many librarians find it disconcerting to have no feedback
with the new checkouts table. It seems that many of them wait for it to
fully load, check to verify the item was checked out, and only then
check out the next item.
To help alleviate this issue, we can have the checkouts page give
feedback about the item that was just checked out.
Test Plan:
1) Apply this patch
2) Check an item out
3) Note the message "$title ($barcode) due on $date_due"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works well and fixes a very problematic issue with the new AJAX
circ. I will be submitting a follow-up which I think is an improvement
to the display.
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 27 Mar 2015 09:03:32 +0000 (10:03 +0100)]
Bug 6911: Remember search terms in the log viewer tool
The modules and actions selected by the user are now selected when a
log search is done.
Note that this patch also add the multiple attribute to the actions
select in order to add the ability to select several actions.
The code to do that already existed.
Test plan:
1/ Go on the log viewer tool (tools/viewlog.pl)
2/ Launch a search with modules and actions selected.
3/ Confirm that the values you have selected is still selected after the
search.
Patch works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Fri, 19 Dec 2014 15:52:47 +0000 (10:52 -0500)]
Bug 13307: (QA Followup) indentation fix
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
http://bugs.koha-community.org/show_bug.cgi?id=13364 Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
simith [Fri, 12 Dec 2014 19:07:45 +0000 (14:07 -0500)]
Bug 13307: Fix jquery.deseriable.min.js
http://bugs.koha-community.org/show_bug.cgi?id=13307 Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
http://bugs.koha-community.org/show_bug.cgi?id=13364 Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
simith [Wed, 3 Dec 2014 14:53:48 +0000 (09:53 -0500)]
Bug 13307: Fix search boxes disappearing when returning to advanced search
http://bugs.koha-community.org/show_bug.cgi?id=13307 Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
http://bugs.koha-community.org/show_bug.cgi?id=13364 Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Followed test plan, works as expected (together with other patches) Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
http://bugs.koha-community.org/show_bug.cgi?id=13364 Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 8 Apr 2015 08:48:26 +0000 (10:48 +0200)]
Bug 6007: Fix MARC framework display when only used tags/subfields
The "Display only used tags/subfields" output breaks DataTables and the
output is unusable.
Test plan:
1/ Go on admin/marctagstructure.pl after you have selected a framework
2/ Check the checkbox
3/ The table should be correctly displayed.
Before this patch, the table have 2 lines per tag, now all data are
contained into the same line.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Sun, 18 Jan 2015 21:41:23 +0000 (22:41 +0100)]
Bug 13539: Remove unused table patroncards
It appears that the table patroncards hasn't been used
since the database updates for the rewritten label modules
('3.01.00.107').
It's time to remove them from the database.
As the patron card batches were needed for printing and
the data has not been accessible in a long time, it seems safe
to delete it.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 7 Apr 2015 14:46:27 +0000 (16:46 +0200)]
Bug 13957: If no value, display an empty string instead of "null"
Using the autocomplete feature in the patron search, if one value is
missing (i.e. country), it will be replaced with 'null'.
The default value should be an empty string.
Test plan:
0/ Enable the patron autocomplete feature
1/ Create a patron without value for country, address, zipcode, city
2/ Go on the circ home page
3/ Search for this patron. The country should not have been replaced by
"null".
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 29 Dec 2014 14:18:08 +0000 (15:18 +0100)]
Bug 13497: Remove the pref AddPatronsLists
The pref AddPatronLists does not work as expected if 'generic' is
selected.
Indeed a patron should be linked to a valid patron category (see the
constraint borrowers_ibfk_1 in the DB structure).
Test plan:
0/ Confirm that the AddPatronLists does not work as expected if you choose
the generic patron types.
1/ Delete all you patron categories and check that the interface invites
you to create one.
2/ Confirm that you are able to create a patron and to link it to a patron
category you have created.
I could not verify step 1/, because at least one Patron category
can not be deleted (Staff, since I'm logged in as a Staff patron
and you can not delete categories that are in use).
Tested 0/ and 2/ Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 8 Apr 2015 10:47:43 +0000 (12:47 +0200)]
Bug 9333: Remove useless JS code - confirm close basket
On closing a basket, the librarian is redirect to a new page for the
confirmation, the JavaScript confirmation is useless.
This code is never triggered and can be removed.
Test plan:
Without this patch, confirm you don't get a JavaScript confirmation
popup on closing a basket
With this patch, confirm you don't get any JavaScript error on
closing/reopening a basket.
NOTE: acqui/basket.tt is only used by acqui/basket.pl
git grep "confirm_close" | grep -v "\.po:"
doesn't show anything else. Reopening only works on
basketgroups, not baskets. Unable to trigger any errors
as expected and desired. :)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 22 Oct 2013 21:58:25 +0000 (14:58 -0700)]
Bug 8033 - Remove unused template file.
All prog related patches were obsoleted from this bug.
Bug 11349 changed the code to have the proper template name
used (sco/printslip.tt instead of sco/printsplit.tmpl).
Bug 12062 moved the hard coded string logic into the template,
and passed the borrower number.
This only leaves the patch to remove the unused receipt.tt file.
TEST PLAN
---------
1) Confirm the file isn't used.
$ git grep "sco/receipt" | grep -v "\.po:"
-- this should list nothing, because there are still po
files referencing it, but they aren't needed either.
2) ls ./koha-tmpl/opac-tmpl/bootstrap/en/modules/sco/receipt.tt
-- there should be a file
3) apply patch
4) repeat step 2
-- the file should be removed
Followed test plan, file does no longer exist. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
git grep receipt.tt says we are safe, trusting the QA people
Jonathan Druart [Wed, 28 Jan 2015 15:37:06 +0000 (16:37 +0100)]
Bug 13244: (follow-up) fix mixup to and from in the sql query
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 29 Sep 2014 13:54:34 +0000 (15:54 +0200)]
Bug 13006: suggestions.mailoverseeing cans be removed
The DB field suggestions.mailoverseeing does not seem to be in used.
It cans be removed.
Actually it has never been in used.
Test plan:
git grep mailoverseeing
should not return relevant results.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests, updates kohastructure and includes a database update.
Also made some tests in the suggestions module.
This patch fixes the regressions introduced by the previous patches.
If you have tested all in once, you didn't see them.
It introduces library, category and "first letter" filters.
Test plan:
1/ On all pages impacted by previous patches + new order empty (link patron to
an order) + guarantor search
2/ Add / Select patron to the list
3/ Use the filters
4/ Confirm there is no regression
Tested together with other patches. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This third patch removes the previous way to search for patron cards users.
Test plan:
1/ Add items to a patron card batch (patroncards/edit-batch.pl?op=edit&element_id=X)
2/ Add 1+ patrons to the batch
3/ Confirm there is no regression
Tested together with other patches. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 20 Mar 2015 12:53:35 +0000 (13:53 +0100)]
Bug 13891: DataTables server-side processing - Serial recipients
This second patch removes the previous way to search for serial recipients.
Test plan:
1/ Edit the routing list for a subscription (serials/routing.pl?subscriptionid=X)
2/ Add 1+ recipients
3/ Confirm there is no regression on the add/delete/search actions
QA note: This search does not use a clean way to interact with the
window opener. Indeed the opener is reloaded to display the new item.
This patch does not change this behavior, but note the trick in the
template (common/patron_search.tt) to wait for the opener in order not
to get a JS error.
This is also used by the next patch (patron card).
Tested together with other patches. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This first patch remove the previous way to search for users to link to
budgets.
Test plan:
1/ Edit or create a fund
2/ Edit the owner of this fund a select a patron
3/ Add 1+ users to the user lists of this fund
Tested together with other patches. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 4 Dec 2013 14:23:17 +0000 (15:23 +0100)]
Bug 11337: Remove the C4::Serials::GetSubscriptions routine
Since SearchSubscriptions is the way to search subscriptions, each call
to GetSubscriptions could be replaced by a call to SearchSubscriptions.
Test plan:
Verify following pages display the same thing as before this patch:
- catalogue/detail.pl
- opac/opac-ISBDdetail.pl
- opac/opac-detail.pl
Verify the following page returns correct results:
- serials/checkexpiration.pl
Verify the Serials UT file still passes:
- prove t/db_dependent/Serials.t
Note: The title filter on checkexpiration now only searches on the title
DB field. I don't think it is a regression, it should be the way to use
this field. Maybe should we add new search fields on this form.
Bug 5337 reintroduces a bug fixed by bug 5864, this patch restore the
right way to search subscription (based on biblionumber).
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 23 Feb 2015 15:39:08 +0000 (16:39 +0100)]
Bug 2806: Remove issuingbranch columns
This column is not in used in the Koha code and could be removed.
Test plan:
Verify the branch is correctly displayed on the circulation history
(members/readingrec.pl) and that both reports Most-cisulated items
(cat_issues_top.pl) and Avg checkout (issues_avg_stats.pl) work as
before.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No problems found.
Fixed wrong table name on updatedatabase.pl and a tab char.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Checked issues and returns are still working correctly.
There is no mention of issuingbranch in the codebase.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 18 Jul 2014 10:54:28 +0000 (12:54 +0200)]
Bug 11008: Drop column aqorders.supplierreference
It seems that this column has never been used.
Test plan:
1/ Execute the updatedatabase entry.
2/ git grep supplierreference should not return occurrence in the code (except
in Koha/Schema/*
3/ prove t/db_dependent/Acquisition.t should return green.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 18 Mar 2015 12:16:43 +0000 (13:16 +0100)]
Bug 13865: Columns configuration - Orders search
This patch adds the ability to hide columns on the orders search page
(acqui/histsearch.pl).
Test plan:
Go on the orders search page and confirm you are able to hide columns.
You can also play with the columns configuration admin page and confirm
that the behaviors are consistent.
Jonathan Druart [Sat, 11 Oct 2014 14:53:41 +0000 (16:53 +0200)]
Bug 13069 - (follow-up) Enable sort by title to ignore articles
This should affect the relatives' checkouts table too.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
NOTE: This is the one later in the javascript file.
Checkout tab on the patron details page.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Thu, 9 Oct 2014 15:22:29 +0000 (15:22 +0000)]
Bug 13069 - Enable sort by title to ignore articles on circulation and patron detail pages
With the conversion of the circulation and patron detail checkout
summary tables to AJAX recently we lost the ability to sort by title
while ignoring articles.
This patch corrects the problem by adding the "anti-the" configuration
to the relevant column in the DataTables initializtion script.
To test, apply the patch and clear your cache if necessary. Check out to
a patron who has multiple checkouts, some of which have titles beginning
with "a," "an," and "the." Sorting those checkouts by title should
ignore articles.
Test the patron detail page for that patron as well.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
NOTE: This is the one early in the javascript file.
This is the one visible by having multiple checkouts
where the title excluding the articles is a different
order than titles including the articles.
Patrons -> Details (scroll down to check out area, view
checkouts and toggle the title sort)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 18 Mar 2015 12:09:06 +0000 (13:09 +0100)]
Bug 13866: Columns configuration - Patrons search
This patch adds the ability to hide columns on the patrons search page
(acqui/lateorders.pl).
Test plan:
Go on the patrons search page and confirm you are able to hide columns.
You can also play with the columns configuration admin page and confirm
that the behaviors are consistent.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Works as expected
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Small rebase was needed.
Jonathan Druart [Tue, 2 Dec 2014 12:33:11 +0000 (13:33 +0100)]
Bug 13372: Items lost report improvements
This enhancement adds new column to display the call number on the
items lost report.
On the way, DataTables and ColVis are added on the table.
Test plan:
1/ Go on the items lost report (reports/itemslost.pl) and verify that the
call number column is correctly filled.
2/ On the way, verify that the 'Library' and 'Current location' now contain
the name instead of the code.
3/ Go on the columns configuration in the admin module
(admin/columns_settings.pl), play with the ColVis plugin and confirm
that all works correctly.
Signed-off-by: David Roberts <david.roberts@ptfs-europe.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13909: Suspension days calculation should respect finesCalendar
This patch make _debar_user_on_return respect the finesCalendar syspref.
It does so, by replacing the ad-hoc overdue days calculation in favor of
C4::Overdues::_get_chargeable_units (which is renamed C4::Overdues::get_chargeable_units
and exported). There's no behaviour change besides making the calculation simpler
and correct.
To test:
- Set finesCalendar = "directly"
- Have a circulation rule stating:
interval for calculating fines = 1
suspension days = 3
- Have the calendar set for sunday and saturday as holidays.
- Checkout an item with a branch/itype/borrower category that matches the defined circ rule with a hand-writen due date to (say) last friday.
- Check the item in
=> FAIL: Notice that the user is debarred using the calendar (skipping saturday and sunday).
- Apply the patch
- Repeat the previous steps
=> SUCCESS: calculation is correct (counting saturday and sunday as overdue days, i.e. 'directly').
- Set finesCalendar = "calendar"
- Repeat the test
=> SUCCESS: calculation is correct (skipping holidays).
- Sign off.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 1 Apr 2015 10:03:13 +0000 (12:03 +0200)]
Bug 13936: Last patch contained wrong change
One of the 2 changes done in the last patch was not for this bug report.
The tt change was intended for bug 13926.
This patch reverts it.
BE CARE: This should NOT be pushed AFTER bug 13926!
Test plan:
Search for a patron using the 'check out' tab in the circulation module.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
- use the checkout tab to search for a patron
not using the autocomplete, but hitting enter
- without the patch, there won't be results
- with the patch there are
Passes all tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 1 Apr 2015 08:12:05 +0000 (10:12 +0200)]
Bug 13934: C4::ItemType->get should return undef if no parameter given
The issue: If you try to check in an item with a non existent barcode,
the application will exploded with a software error:
"Can't bless non-reference at .../ItemType.pm Line 64".
It's caused by:
commit 7431f8cfe29e330e2232b0df591afc4d923b0a52
Bug 11944: Fix encoding issue in C4::ItemType
and the following change:
@@ -105,9 +104,6 @@ sub get {
my $data = $dbh->selectrow_hashref(
"SELECT * FROM itemtypes WHERE itemtype = ?", undef, $itemtype
);
- if ( $data->{description} ) {
- $data->{description} = Encode::encode('UTF-8', $data->{description});
- }
because of the following:
my $s;
$s->{foo} = "bar" if $s->{foo};
use Data::Dumper;warn Dumper $s;
=> {} # not undef
So later,
bless $opts => $class;
will fail because $opts is undef and was not (i.e. {}) before.
More explicit test plan:
1) Log in to staff client
2) Circulation -> Check in
3) Type a non-existent barcode into 'Enter item barcode:' textbox
4) Click 'Submit'
-- Should receive nasty error.
5) apply patch
6) repeat steps 2-4
-- Should be told 'No item with barcode: {what you typed}'
7) prove -v t/ItemType.t
-- All tests should run successfully.
7) run koha qa test tools
Note: Having tried to create and use an itemtype '0', this only
demonstrates a lack of validation on the itemtype creation
screen. Unable to use it without tweaking back end.
That is beyond the scope of this bug.
Note for QA: C4::ItemType->get is only uses in circ/return.pl. So even
if the behavior is changed, it should not introduce any regression
somewhere else.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected. Fixes the problem and no regressions found.
It even has regression tests :-D
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jacek Ablewicz [Mon, 23 Mar 2015 14:21:53 +0000 (15:21 +0100)]
Bug 10906 - Reimported records into Koha are imported only as DEFAULT frameworks, not what they were originally
Existing framework code is currently not retained when local record
gets replaced during batch import, or when the restore/reverse function
is being used.
This patch fixes aforementioned issues by correcting outdated GetBiblio()
calls in C4/ImportBatch.pm
To test:
1/ try to replicate the issue: import some MARC records with
"Tools -> Stage MARC records for import" etc., using test setup,
matching rules and so on such that some existing records will get
replaced with imported ones
2/ observe that records replaced during import now open in the editor
with 'Default' framework, even if they have some other framework
set up previously
3/ apply patch
4/ redo 1/, confirming that this problem is no longer replicable
5/ try use 'restore' function with some freshly imported
records, ensure that original framework code got retained
in the records which had their imports reverted
NOTE: I confirmed this change by
1) git grep "=\s*GetBiblio\s*("
-- this shows how GetBiblio is called elsewhere.
It differed! So then...
2) vi C4/Biblio.pm
/sub GetBiblio
-- find the right one, notice it only returns a HASH ref,
not an array.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Sun, 29 Mar 2015 09:44:19 +0000 (11:44 +0200)]
Bug 8796 - patron cards not starting on designated card
The patron cards always printed from position 1 on the print form, because patroncards/create-pdf.pl expected start_label as parameter and got star_card instead.
To verify and test:
1)
Go to Home > Tools >Patron card creator >Manage batches
2)
Select a batch anc click "Export"
3)
Set "Enter starting card number" e.g. to 5
4)
Export
5)
Download PDF and view it
Result: The first card is always printed on position 1 (top left) instead of position 5.
Apply patch
Repeat steps above
Step 3) should now read "Enter starting card position"
Result after step 5)
The first card ist printed at the correct position on the printing form.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Works as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Rebased for current master and tested. /MV
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
Ensure OPACPatronDetails is set to enabled
Apply the patch
Log into the OPAC and update your patron details (address, phone number etc)
Log into the staff client and view pending patron changes.
The branchcode of the library to which the patron belongs should display next to the user's name.
Followed test plan, works as expected Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13611 - Serial enumeration not visible in the opac-user.pl when browsing own holds.
Having placed holds on Serial Items with an enumchron, and browsing the
opac-user.pl's "Holds"-tab, the user cannot see which numbers of
magazines/serials he has on hold.
This patch appends the koha.items.enumchron after the title component in the
opac-user.pl's Holds-view.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fridolin Somers [Thu, 30 Oct 2014 10:59:28 +0000 (11:59 +0100)]
Bug 13166 - add all restrictions purge to cleanup_database.pl
Bug 12760 adds the ability to purge expired restrictions older than some days.
But if you want to purge all expired restrictions, using "--restrictions 0" does not work, it's like "--restrictions" so it uses default purge days.
This patch adds a new option "--all-restrictions" to purge all expired restrictions.
Test plan :
- Select a borrower
- Create a restriction with expiration date in the futur
- Create a restriction expired since 1 day
- Create a restriction expired since 10 days
- run without argument "misc/cronjobs/cleanup_database.pl"
=> You see help text for --all-restrictions option
- run "misc/cronjobs/cleanup_database.pl -v --restrictions --all-restrictions"
=> You get the message : You can not specify both --restrictions and --all-restrictions
- run "misc/cronjobs/cleanup_database.pl -v --restrictions 30"
=> no restriction is removed
- run "misc/cronjobs/cleanup_database.pl -v --restrictions 9"
=> restriction expired since 10 days is removed
- run "misc/cronjobs/cleanup_database.pl -v --all-restrictions"
=> restriction expired since 1 day is removed
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Julian FIOL [Fri, 27 Mar 2015 13:44:01 +0000 (14:44 +0100)]
Bug 13940 : Testing C4::OAI::Sets
Testing C4::OAI::Sets in t/db_dependent/OAI/Sets.t
Adding &DelOAISetsBiblio in @EXPORT at the beginning
of OAI/Sets.pm, it was the only one missing
TEST PLAN
---------
1. Apply patch
2. prove -v t/db_dependent/OAI/Sets.t
-- All 145 tests should run successfully without any error or warning
3. Run koha qa test tools
-- No issues found.
Additionally, I comfirmed why DelOAISetsBiblio was added in
the list of exported functions.
$ grep "^sub " C4/OAI/Sets.pm | sort > check1
$ for i in `grep "\&[A-Z]" C4/OAI/Sets.pm | xargs `; do echo $i; done | sort > check2
Of course the outputs have a little extra around them, so
$ vi check1
$ vi check2
$ diff check1 check2
Lo and behold, it was that one function. Necessary for 100% coverage.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Josef Moravec [Thu, 2 Apr 2015 04:16:44 +0000 (06:16 +0200)]
Bug 13939: ILS-DI function GetServices doesn't work when the item/biblio is available for hold for specific patron
Test plan:
1) Enable ILS DI (system preference 'ILS-DI')
2) Try to access the URL
http://<your_opac_url>/cgi-bin/koha/ilsdi.pl?service=GetServices&patron_id=<borrowernumber>&item_id=<itemnumber>
Choose the patron and item to be available for hold
You'll see an error instead of valid XML response
3) apply the patch
4) try to access the same URL, you should see valid XML response with services "title level hold" and eventually "item level hold" returned
Signed-off-by: Thomas Misilo <misilot@fit.edu> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nick Clemens [Fri, 6 Mar 2015 19:35:38 +0000 (19:35 +0000)]
Bug 13800 - Diacritics not mapped
This patch adds a mapping for the lower case ð character to word-phrase-utf.chr ( Ð was already mapped to d)
To test:
1. Add a record with the ð character (Arnaldur Indriðason is an example author)
2. Rebuild zebra
3. Search for your record using d instead of ð and verify it is not found
4. Apply patch and copy word-phrase-utf.chr to the appropriate folder
5. Restart and rebuild zebra
6. Search for your record using d instead of ð and verify it is found
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
works as expected
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 27 Mar 2015 09:47:40 +0000 (10:47 +0100)]
Bug 6950: Hide the resort option when searching for a tag
If you click a link from the Tag Cloud, the results page offers the
usual select menu to resort your results. However, doing so resubmits
the search as a standard keyword search.
Test plan:
1/ Click on a tag
2/ Confirm that the resort dropdown list does not appear.
Dropdown list disappears with tags as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 19 Mar 2015 15:39:13 +0000 (16:39 +0100)]
Bug 13875: Columns configuration - Allow underscore in table name
This is a bug fix for bug the columns configuration feature, and
specialy for bug 13864.
Test plan:
Apply patches on bug 13864 and save columns for the late orders (in the
columns configuration admin page).
Confirm that they are correctly saved.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
works as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 18 Mar 2015 11:56:07 +0000 (12:56 +0100)]
Bug 13864: Columns configuration - Late orders
This patch adds the ability to hide columns on the late orders page
(acqui/lateorders.pl).
Test plan:
Go on the late orders page and confirm you are able to hide columns.
You can also play with the columns configuration admin page and confirm
that the behaviors are consistent.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
http://bugs.koha-community.org/show_bug.cgi?id=13875 Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 18 Mar 2015 15:49:52 +0000 (16:49 +0100)]
Bug 2542: Validate the amount of a manual invoice/create
If a manual invoice/credit amount is not correctly set, it should not be
accepted.
Test plan:
Try to create a manual invoice and a manual credit with an amount containing
something else than numbers.
It should not be possible.
Followed test plan. Patch behaves OK, including that negative values are not allowed. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Attila Kinali [Mon, 23 Mar 2015 21:58:22 +0000 (22:58 +0100)]
Bug 13896: Fix pid file creation, use proper directory instead of /tmp/
daemon uses by default /tmp/ for pid files, if they are unspecified.
Pass the right directory to daemon, so it knows where to put the pid file.
Signed-off-by: Attila Kinali <attila@kinali.ch>
TEST PLAN
---------
1) Roll a distribution and confirm it works.
OR
1) Hack all the /var directories to point to git directories
2) Add a dummy user for the instance name
3) sudo the script with the faked instance name.
-- the daemon should be running and the pid file should be in
the expected directory.
The first way is the proper way to test, I did the latter. :)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 7 Jan 2015 13:39:35 +0000 (08:39 -0500)]
Bug 11239 - show hour of due date in history circulation
The circulation history page (Patron -> Circulation history) does not
show the time when displaying the date of checkout, due date, and check
in. This patch adds the "with_hours => 1" flag to the KohaDates filter.
To test, apply the patch and view the circulation history page for a
patron with good circulation history data. Confirm that dates are
displayed correctly with times and that date sorting still works
correctly.
Signed-off-by: marjorie <marjorie.barry-vila@ccsr.qc.ca> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Julian FIOL [Fri, 20 Mar 2015 09:45:51 +0000 (10:45 +0100)]
Bug 13882 : Adding new unit tests in t/Borrower.t
This adds testing for all the 'borrower' database fields.
TEST PLAN
---------
1) apply patch
2) prove -v t/Borrowers.t
-- All 67 subtests for both the setter and accessor
should run successfully.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Mon, 30 Mar 2015 13:04:41 +0000 (09:04 -0400)]
Bug 13928: Clean up noisy t/Borrower.t tests
While testing bug 13882, noisy messages were noticed. Also,
Test::Warn was used, but no catching attempts were made. This
patch solves that problem.
TEST PLAN
---------
1) prove -v t/Borrowers.t
-- There should be three noisy lines.
2) apply patch
3) prove -v t/Borrowers.t
-- There will be 3 more tests and no noisy lines.
4) Run koha qa test tool
-- There should be no issues.
NOTE: This will conflict with bug 13882 if either gets pushed
to master, but fixing the conflict should be easy enough.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Works as expected
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13507: Add intranet support for CAS authentication
This patch allows to use CAS authentication for intranet login.
It works exactly the same as the OPAC login, except that the
staffClientBaseURL syspref must be set for intranet login
(like OPACBaseURL must be set for OPAC login).
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13507: (regression test) Intranet URL returned by C4::Auth_with_cas::_url_with_get_params
C4::Auth_with_cas::_url_with_get_params should return the right
URL for intranet.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Edit: added a proper commit message. Sort of :-P
Jonathan Druart [Mon, 30 Mar 2015 15:04:27 +0000 (17:04 +0200)]
Bug 7561: Redirect to the add items form if it's a fast cataloging
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 30 Mar 2015 11:17:26 +0000 (13:17 +0200)]
ug 7561: Fast cataloging - Allow add/edit items and delete record
With the fast cataloging permission, a librarian was not able to
add/edit items and to delete a record with the FA framework.
This patch fixes that.
Test plan:
0/ Set the permission fast_cataloging (and only this one under
editcatalogue) to a librarian
1/ Log in with this account
2/ Go to Circulation > Fast cataloging
3/ Confirm you can create a record
4/ Save and confirm you can create items
5/ Confirm you are able to edit items, remove all of them and delete the
record.
6/ Make sure it only works for records with the FA framework code.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 31 Mar 2015 14:32:33 +0000 (16:32 +0200)]
Bug 8246: Allow deleting record if no more items
The "Delete records if no items remain" was only available if the batch
did not contain "too many" items (see MaxItemsForBatch).
This limitation does not make any sense.
Test plan:
1/ Set MaxItemsForBatch=10
2/ Use the batch item deletion to delete 10+ items
3/ Confirm the checkbox "Delete records if no items remain" is displayed
4/ Check it
5/ Launch the job
6/ Run koha qa test tools
Verify that the records without items have been deleted also.
NOTE: My test db only had two biblios with items, so I set
MaxItemsForBatch=1.
Before patch, checkbox did not display.
After patch, checkbox did display.
This patch merely moves one line out of the IF/ELSE/END
block, and reindents for more readability. Though, there
is a missing <p> if you want to get picky.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Abby [Mon, 16 Feb 2015 14:45:16 +0000 (15:45 +0100)]
Bug 10887: Batch item deletion -- doesn't need Use default values section
To test:
1. Go to Home > Tools > Batch item deletion
2. Notice that there is an unnecessary option for "use default values
section" to "Populate fields with default values from default work"
3. Apply the patch.
4. Check that this section has disappeared.
Signed-off-by: Nick <Nick@quechelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Mon, 23 Mar 2015 20:42:14 +0000 (21:42 +0100)]
Bug 13380: Follow-up - only run database update, when it hasn't been run already
As the ORDER_CANCELLATION_REASON authorised value has been
backported to 3.18.5, we need to make sure that the database
update is only run once.
This patch adds a check for the existance of the authorised
value in order to decide if the databaes update can be run.
To test:
- Create a branch 3.19.00.016
- Make sure you have a few orders where the cancellationreason
is set (cancel an order, enter a reason)
- Update your branch to master + this patch
- Run the web installer
- ORDER_CANCELLATION_REASON authorised value category is created
- Reset your system preference Version to 3.19.00.015
- Run database update again - no changes are made, all is fine
Or:
- Create a branch 3.18.04 with cancelled orders
- Update to latest 3.18.x
- Make sure ORDER_CANCELLATION_REASON has been created
- Dump database
- Switch to master without this patch
- Run update - verify more O_C_R were created (bad)
- Load database
- Update to master with this patch
- All should be fine
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Fri, 27 Mar 2015 16:30:01 +0000 (17:30 +0100)]
Bug 7480: Don't display current logged in user as basket manager
The "Managed by" field displayed on creating/editing an order is always
the name of the logged in user.
To reproduce:
1/ Log in with patron A
2/ Create a basket
3/ Create an order
4/ Log in with patron B
5/ Edit the order
6/ The "Managed by" line is "patron B"
Test plan:
Apply the patch and confirm that the "patron A" is always the basket
manager.
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 20 Mar 2015 13:07:03 +0000 (14:07 +0100)]
Bug 13879: Fix sort on patron search (guarantor and linked to orders)
This patch fixes a regression introduced by bug 13021.
Test plan:
1/ Go on a child detail page > edit
2/ Click on "Set a patron" as a guarantor
3/ Launch a search a confirm that you are able to sort on card, name and
date of birth.
Note that the Address column is not sortable (it's a limitation, could
be fixed later).
4/ Go on the acquisition module, create an order.
5/ Click on the "Add user" button.
6/ Launch a search a confirm that you are able to sort on card, name and
category
Without patch, I could not sort on names. With patch, sorting works as dexcribed in Test plan
Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 27 Mar 2015 11:02:11 +0000 (12:02 +0100)]
Bug 13923: The prefetch used on existing constraint
The belongs_to constraint has been removed by bug 13713.
Not sure if it was a good idea, but atm the easy and quick way is to
remove the prefetch.
Test plan:
Go on the circulation page, holds tab
Confirm that there is no regression
(Same on the patron details page > Holds tab)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
Add a 660 and 661 field to a record and export it in RIS
The 660 and 661 field should be displayed (after "KW").
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Mon, 6 Apr 2015 12:06:46 +0000 (14:06 +0200)]
Bug 13954 - Patroncards: images show inadequate rough pixelation
This patch provides a much better quality of images on patron cards.
It inserts images at a higher resolution into the PDF file and then scales it down internally in PDF.
Additionaly, the patch removes the follwing warning:
"my" variable $template masks earlier declaration in same scope at /usr/share/kohaclone/patroncards/create-pdf.pl line 66
To test:
- Create patron cards, save them as PDF and display them with a PDF viewer, e.g. at 400%
- Without patch, the images are very pixelated.
- Apply patch
- Verify that in the PDF the images now display with a much better quality.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Fri, 3 Apr 2015 12:14:47 +0000 (08:14 -0400)]
Bug 12210 - Baker & Taylor book jackets not disabled when BakerTaylorBookstoreURL is not populated
The description of the BakerTaylorBookstoreURL syspref says
"Baker and Taylor "My Library Bookstore" links should be accessed at
https:// isbn (this should be filled in with something like
ocls.mylibrarybookstore.com/MLB/actions/searchHandler.do?nextPage=bookDetails&parentNum=10923&key=).
Leave it blank to disable these links."
Leaving this syspref blank does not disable the links. Instead, they are
populated without the bookstore URL: the cover image for ISBN 1575725738
will cause koha to make a request to http://1575725738, which will, of
course, time out.
Leaving BakerTaylorBookstoreURL blank should disable any URL that
depends on this syspref, as stated in the syspref description.
Test Plan:
1) Apply this patch
2) Enable Baker & Taylor cover images, but *not* BakerTaylorBookstoreURL
3) Perform an OPAC search where you have B&T cover images in the results
4) Note the image links now direct you to the record details
Signed-off-by: Sheila Kearns <sheila.kearns@state.vt.us> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Only affects Baker & Taylor related parts of the code.
Read the code carefully, but couldn't test in the OPAC.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Wed, 25 Mar 2015 15:33:48 +0000 (11:33 -0400)]
Bug 13908 - Checkouts table sorting is not honoring default sort preferences
The checkouts table no longer honors the system preferences
todaysIssuesDefaultSortOrder and previousIssuesDefaultSortOrder.
This causes much frustration for librarians who prefer a different sort
order. In particular, many librarians prefer to see the oldest previous
issues at the top of the list so those overdue items are visible "above
the fold".
Test Plan:
1) Apply this patch
2) Find a patron with many previous checkouts due on different days
3) Try all 4 combinations of todaysIssuesDefaultSortOrder and previousIssuesDefaultSortOrder
4) Note they all sort correctly
Signed-off-by: Sean McGarvey <seanm@pascolibraries.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Wed, 1 Apr 2015 15:13:05 +0000 (11:13 -0400)]
Bug 13938 - Staging MARC records for import fails
It appears that bug 8970 has introduced a bug where a MARC file uploaded
for staging fails to import *unless* a matching rule is selected.
Test Plan:
1) Apply this patch
2) Stage and import a MARC record *without* choosing a matching rule
3) Note the staging works as expected
Signed-off-by: Cindy Ames <cmurdock@ccfls.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The pref dateformat and TimeFormat were retrieved before the mock.
Before bug 13601, the complete preference method was mocked, that's why
the error did not appear.
Test plan:
sudo service mysql stop
prove t/DateUtils.t
should be happy
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 9580: (QA followup) add a Coce syspref and fix options for Providers
This proposed followup adds a 'Coce' syspref so it is consistent with
the rest of the enhanced content providers sysprefs (also, there's no
point making the user delete its configuration if disabling his Coce
integration for testing purposes, for example).
It also changes the CoceProviders syspref so it is a 'multiple' type
syspref. It puts some sensible descriptions to the options too.
Feel free to discuss this followup, it is just an idea!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
- OK for the 'Coce' syspref: it's sensible to distinct configuration
from enabling/disbaling the service.
- OK also for the multichoices systempreference. If a new service
popup, it won't be difficult to amend the .pref file.
Bug 9580 Cover images from Coce, a remote image URL cache
Add to Koha support for displaying Book cover requested to Coce, a
remote image URL cache:
https://github.com/fredericd/coce
With this enhancement, cover images are not fetched directly from
Amazon, Google, and so on. Their URL are requested via a web service to
Coce which manages a cache of URLs.
Three cover image providers are now available: Google Books (gb), Amazon
(aws), and Open Library (ol). Two system preferences enable this service:
- CoceHost - URL of Coce server
- CoceProviders - Ordered list of requested providers. For example
gb,aws,ol, will return the first available URL from those providers.
Several advantages to this architecture:
- If a book cover is not available from a provider, but is available
from another one, Koha will be able to display a book cover, which
isn't the case now
- Since URLs are cached, it isn't necessary for each book cover to
request, again and again, the provider, and several of them if
necessary.
- Amazon book covers are retrieved with Amazon Product Advertising
API, which means that more covers are retrieved (ISBN13).
Test plan:
- Apply this patch, and test with 'Bootstrap' themes
- You can verify that nothing has changed on OPAC result and detail
page, since new syspref haven't been filled
- Install Code: https://github.com/fredericd/coce
Or ask me directly for the URL of a Coce server
- In sysprefs, tab Enhanced content, modify:
CoceHost -- enter the URL of your Coce server
CoceProviders -- fill with: gb,aws,ol
- Do a search. On result page, and detail page, you will see cover
images originating from the 3 providers: fly over the image to see its
URL. Try to compare with a Koha with just GoogleJacket or Amazon cover
to confirm that you have more images. Verify that it's quick, and even
quicker for cached images URLs.
- Check that Browse Shelf functionnality works properly.
- The ID sent to Coce is EAN or ISBN. Try with various type of biblios. DVD
have often EAN, but no ISBN.
- You can try with those sysprefs:
CoceProviders: aws,gb
CoceHost: http://coce.tamil.fr:8080
and this EAN (or ISBN): 3333297517744
=> OPACAmazonCoverImages enabled doesn't display a cover because, it's a DVD
=> Coce find and display the DVD cover.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: replaced 1 tab with spaces in C4/Shelfbrowser.pm
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Justin [Wed, 14 Jan 2015 03:28:07 +0000 (03:28 +0000)]
Bug 13549: Add cardnumber to overdue circulation report overdue.pl
Test Plan:
- Create an overdue item.
- Navigate to overdue circulation report (Home -> Circulation -> Overdues)
- Notice there is no card number showing in the Patron column.
- Apply patch.
- Refresh page.
- Notice there is a card number showing in the Patron column.
Signed-off-by: Justin <justinvos@live.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fridolin Somers [Tue, 17 Mar 2015 13:50:14 +0000 (14:50 +0100)]
Bug 13852 - Manage C4::VirtualShelves in C4::Auth for performance
In C4::Auth there is a use C4::VirtualShelves.
Virtualshelves are displayed in all OPAC pages, but not in intranet.
For performance, we should move this into a require only for opac pages.
This patch adds a condition to fetch virtualshelves only if opac and moves the dependancy on C4::VirtualShelves into require calls.
On my desktop, I have those compilation times for C4/Auth.pm :
- Without patch : 0,41 seconds
- With patch : 0,22 seconds
This performance improvement is very usefull for pages that only use a few as dependancy, like errors/404.pl
Test plan :
- Be sure there are some public lists
- Apply patch
- Go to opac (not logged-in)
- Click on "Lists"
- Check you see the public lists
- Login with a user
- Be sure this user has some private lists
- Click on "Lists"
- Check you see the public and private lists
- Logout
- Go to /cgi-bin/koha/opac-reserve.pl
- You see the loggin page
- Click on "Lists"
- Check you see the public lists
- Go to intranet
- Check you can loggin
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 24 Mar 2015 15:22:46 +0000 (16:22 +0100)]
Bug 4277: Display the correct budget planning after saving
The budget_period_id is not pass to the script, so after saving the
budget planning, the planning for the first active budget is displayed.
Test plan:
1/ Edit a budget planning
2/ Save
3/ You should see the budget planning you were editing
Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Rafal Kopaczka [Mon, 9 Mar 2015 13:30:30 +0000 (14:30 +0100)]
Bug 9481 - charge not showing fines On 'Check out' and 'Details'.
When looking at the patron record or the checkout screen the checkout
summary is now showing 0 for all the Charges even if the item was
overdue and has accrued fines.
Removed unused(?) footer values in checkouts-table-footer.inc
To test:
1/ Check out items with past due date
2/ Run fines.pl script (ensure finesMode is set to Calculate and Charge)
3/ Verify on Fines->Pay Fines screen that fines where calculated
correct.
4/ Go to Patron record, charge column on Details and Check out
screen
should be 0 or rental charge amount only. But total amount row
display right
number, same as in pay fines screen.
4/ Apply patch.
5/ Now charges on display and check out screen shows all outstanding
fees for each item.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Wed, 18 Mar 2015 00:11:24 +0000 (01:11 +0100)]
Bug 13859: Item search improvements - publication date and title formatting
In the item search accessible from the advanced search the publication
date would not display for MARC21 and the title always contained 'by'
even if there was no author information to display. Also the by is
not needed by MARC21 as the data includes punctuation.
To test:
- Check publication date always displays (MARC21 and UNIMARC)
- Check that for MARC21 the by has been removed from the title information
- Check that for UNIMARC the by only displays when there is also
an author to display
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested for MARC21
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 24 Mar 2015 09:55:50 +0000 (10:55 +0100)]
Bug 13898: Remove CANDELETEUSER code
This code is never used. The permission to delete a patron is now done
in members-toolbar.inc using CAN_user_borrowers.
It's the good way to do.
Test plan:
git grep CANDELETEUSER
should not return any result
Followed test plan. No CANDELETEUSER found. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
projects / koha.git / log