Jonathan Druart [Mon, 23 Apr 2018 21:52:00 +0000 (18:52 -0300)]
Bug 19204: Add a test: holiday is expiration date
Sponsored-by: Goethe-Institut Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 23 Apr 2018 21:12:00 +0000 (18:12 -0300)]
Bug 19204: Clean the tests a bit to reuse the same pattern
The same pattern is used several times in test:
checkout, checkin, get the debarment, compare the dates and remove the
debarment.
Let's move that to a separate subroutine
Sponsored-by: Goethe-Institut Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 23 Apr 2018 18:23:00 +0000 (15:23 -0300)]
Bug 19204: Make the debarment date calculation depends on finesCalendar
This patchs adds the ability to calculate the end of the suspension date
(debarment date) using the finesCalendar syspref.
Prior to this patch it was never calculating without taking into account
the calendar.
calculated without taking holidays into account.
This was a problem because the restriction could end in the middle of a
period the library is closed.
Test plan:
- Set finescalendar to 'not including days the library is closed'
- Set a circulation condition with no fine/maxfine, but fine days and
max fine days instead
- Check out an item with a due date in the past
- Check the item in and verify the restriction date
- Clean the restriction
- Add holidays to your calendar on the calculated restriction date
- Check the item out again with the same due date in the past
- Check in the item again
- Verify the calculated restriction end date has changed, it's set to the day
after the holiday.
Fines in days restriction calculation is correctly taking calendar
into account.
Sponsored-by: Goethe-Institut Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 20100: (QA follow-up) Pref description and improve code in member-flags
Two points as mentioned on Bugzilla comment29.
[1] Improve pref description. Feedback from comment30 incorporated.
[2] Improve code in member-flags. Check if we change librarian flag first.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested the die with "disable_superlibrarian_privs => 0" in member-flags.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Wed, 31 Jan 2018 15:47:23 +0000 (16:47 +0100)]
Bug 20100: Disallow access to superlibrarian privileges at client side
This last patch activates the check at client side.
If the pref ProtectSuperlibPrivs is enabled, non-superlibs should not be
able to change superlibrarian privileges via the interface.
Test plan:
[1] Enable the pref.
[2] Login as superlib and add/remove superlib privs to a staff user.
[3] Login as another user (no superlib, but having borrowers, permissions
and staff_access). Verify that you cannot add or remove superlib
privs.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Wed, 31 Jan 2018 14:02:36 +0000 (15:02 +0100)]
Bug 20100: Disallow access to superlib privileges at server side
Depends on pref ProtectSuperlibPrivs.
If enabled, script member-flags.pl will not allow you to add or remove
superlib privs when you are no superlibrarian.
The follow-up patch will enable the check at client side.
Test plan:
[1] Enable the pref. Do not apply the third patch (client side).
[2] Login as superlib and add/remove superlib privs to a staff user.
[3] Login as another user (no superlib, but having borrowers, permissions
and staff_access). Verify that you have an internal server error when
you add or remove superlib privs. The log contains a warning.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This pref allows you to block changes to superlibrarian privileges at
client and server side for non-superlibrarians.
This patch only contains the db rev and the preference description.
Test plan:
Run dbrev or new install. Check pref value.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Katrin Fischer [Sat, 21 Apr 2018 00:40:15 +0000 (00:40 +0000)]
Bug 2696: (QA follow-up) Several fixes to template variables
- Fix link to patron account in breadcrumbs
- Fix includes for accounttype.inc to display type correctly
- in Details for fee
- in Payments list
- Fix use CGI qw ( -utf8 );
- Remove <br> from within a string for better translation
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Thu, 21 Dec 2017 14:15:52 +0000 (14:15 +0000)]
Bug 2696: Fine payments should show what was paid for
Test Plan:
1) Apply this patch and its' dependencies
2) Create and pay some various fees and fines
3) View the payments for fees, and fees paid by payments by
using the new 'Details' button available on boraccount.pl
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Running updatedatabase.pl after patch application makes dependencies
happy. Passes QA Tools and works as intended.
Rebased (2017-12-21): Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 2696: (QA follow-up) - Remove use of GetMember
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Wed, 28 Mar 2018 02:47:18 +0000 (02:47 +0000)]
Bug 20482: Correct Terminology codes to Bibliographic ones
"RELATIONSHIP TO ISO 639-2
ISO 639-2 (Codes for the representation of names of
languages-- Part 2: alpha-3 code) was based on the MARC
Code List for Languages and published in 1998. In the 22
cases where the ISO 639-2 list has two alternative codes,
the bibliographic code is the same as the MARC code."
(http://www.loc.gov/marc/languages/introduction.pdf)
This leads me to believe that eus, mri, and sqi are
incorrect. The slk code was corrected on an earlier bug.
TEST PLAN
----------
Apply patch
Do a database upgrade
-- Are eus, mri, and sqi fixed?
reset_all
-- Are eus, mri, and sqi never there in the first place?
koha qa test tools only check perl code.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Radek Šiman [Thu, 8 Mar 2018 21:28:37 +0000 (22:28 +0100)]
Bug 20245: Wrong language code for Slovak
This patch updates iso639_2_code value for Slovak language
Test plan:
1) Obtain a biblio record having 'slo' value in its language
code (marc field 041a)
2) Try to find it through Advanced search + more options
with language set to Slovak
3) Nothing is found
4) Apply this patch
5) Repeat steps 1 and 2
6) Record is found now
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 23 Apr 2018 19:19:50 +0000 (16:19 -0300)]
Bug 20616: Prevent "edit serials" form submission if no serial is selected
In order to prevent the form to submit and gives an ugly error if no
issues are selected we will make sure at least one is checked otherwise
an alert will be displayed.
Test plan:
- create a subscrpition
- go to the serials collection page
- don't check any checkboxes for serials
- click 'Edit serials'
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 23 Apr 2018 15:07:58 +0000 (12:07 -0300)]
Bug 20625: Handle non existing of active currency
This patch avoid the explosion in the air when creating a new patron
category and no active currency is defined.
Test plan:
Remove the currencies, create a new patron category
Without this patch applied you will get
Can't call method "p_sep_by_space" on an undefined value
With this patch the form will be displayed correctly and you will be
able to create the patron category
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Fri, 20 Apr 2018 18:35:14 +0000 (18:35 +0000)]
Bug 20617: Add 'Search Engine configuration' link to administration menu
This patch adds a link to the Elasticsearch configuration page in the
administration sidebar menu when Elasticsearch is enabled.
This patch also corrects the title of the Elasticsearch page to match
the page heading. "Search engine configuration" instead of
"Elasticsearch mappings."
To test, apply the patch and set the SearchEngine system preference to
"Elasticsearch."
- View any page in the administration module which shows the
left-hand sidebar menu. The link to search engine configuration
should be there.
- View the search engine configuration page and confirm that the page
title is correct.
- Set the SearchEngine system preferenc to "Zebra."
- The search engine configuration link should no longer appear in the
administration sidebar menu.
Signed-off-by: David Bourgault <david.bourgault@inlibro.com> Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
User views the "Your privacy" -page, it shows "No reading history to
delete", even when the user has history.
Test plan:
- Turn OPACPrivacy on
- Go to opac-privacy.pl
- Click the "Immediate deletion button" to delete the reading history
=> If the patron has reading history you must get "Your reading history has been deleted."
Otherwise "No reading history to delete"
Note that this patch reintroduce the "something went wrong" message if
the deletion failed for whatever reason.
Signed-off-by: David Bourgault <david.bourgault@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 13445: Remove URL option from scheduled reports, add Text option
Remove the non-functional 'URL' format
Offer the (functional) CSV & HTML formats
testing plan:
- visit the task scheduler tool at cgi-bin/koha/tools/scheduler.pl
- 'Output format' select list should offer Text (TSV), CSV, & HTML
- scheduled reports for each of the above types should run & send emails correctly
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Maksim Sen <maksim.sen@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Ere Maijala [Tue, 23 Jan 2018 13:21:31 +0000 (15:21 +0200)]
Bug 20073: Move Elasticsearch configs to yaml files and improve the default settings.
Improvements:
1) Index settings moved from code to etc/searchengine/elasticsearch/index_config.yaml. An alternative can be specified in koha-conf.xml.
2) Field settings moved from code to etc/searchengine/elasticsearch/field_config.yaml. An alternative can be specified in koha-conf.xml.
3) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch. An alternative can be specified in koha-conf.xml.
4) Default settings have been improved to remove punctuation from phrases used for sorting etc.
5) State variables are used for storing configuration to avoid parsing it multiple times.
6) A possibility to reset the fields too has been added to the reset operation of mappings administration.
7) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch.
8) An stdno field type has been added for standard identifiers.
To test:
1) Run tests in t/Koha/SearchEngine/Elasticsearch.t
2) Clear tables search_fields and search_marc_map
3) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
4) Verify that admin/searchengine/elasticsearch/mappings.pl displays the mappings properly, including ISBN and other standard number fields.
5) Index some records using the -d parameter with misc/search_tools/rebuild_elastic_search.pl to recreate the index
6) Verify that you can find the records
7) Put <elasticsearch_index_mappings>non_existent</elasticsearch_index_mappings> to koha-conf.xml
8) Verify that admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1 fails because it can't find non_existent.
9) Copy etc/searchengine/elasticsearch/mappings.yaml to a new location and make elasticsearch_index_mappings setting in koha-conf.xml point to it.
10) Make a change in the new mappings.yaml.
11) Clear table search_fields (mappings reset doesn't do it yet, see bug 20248)
12) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
13) Verify that the changes you made are now visible in the mappings UI
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 20 Dec 2017 20:01:08 +0000 (17:01 -0300)]
Bug 19855: Move getalert, addalert and delalert to Koha::Subscription
This patch removes 3 subroutines from C4::Letters:
- getalert
- addalert
- delalert
And add 3 methods to Koha::Subscription:
- subscribers
- add_subscriber
- remove_subscriber
It makes the code cleaner for future cleanup.
TODO - we should remove alert.alertid and alert.type, and rename
alert.externalid with alert.subscriptionid
That way alert will be renamed borrowers_subscriptions (or similar) and
will become a simple join table between borrowers and subscriptions.
We will need to deal with FK that could not be satisfied.
Let's do that after this patch is pushed.
Test plan:
Subscribe and unsubscribe to email notifications sent when a new issues
is available.
Make sure everything works as before and you receive the emails.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 20 Dec 2017 17:26:39 +0000 (14:26 -0300)]
Bug 19855: Remove $type from the alerts
It looks like this feature has never been finished. It has been
developed with more flexibility in mind, but only 'issue' is used for
this parameter. Apparently it could have been 'virtual', for virtual shelves.
Let remove this parameter and clean the code a bit.
TODO: Remove the DB column
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 20 Dec 2017 17:14:57 +0000 (14:14 -0300)]
Bug 19855: Remove C4::Letters::findrelatedto
This subroutine is called only once. It only concat firstname and
surname for subscribers.
It can be easily replaced with Koha::Patron
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 20 Dec 2017 17:10:44 +0000 (14:10 -0300)]
Bug 19855: Remove getalert from moremember.pl
This is not used later and seems unused since:
commit b38997925f603dc9784c25d3db3501644c19e068
Date: Wed Oct 26 09:11:02 2005 +0000
big commit, still breaking things...
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 17 Apr 2018 21:14:22 +0000 (18:14 -0300)]
Bug 18426: Address QA issues
- Replaced with the "action" links we already have on the biblio detail
page and the items lost report.
- Display all the editable values in the table
- Add a 'Cancel' link
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Julian Maurice [Tue, 11 Apr 2017 16:07:47 +0000 (18:07 +0200)]
Bug 18426: Allow to edit subscriptions in batch
This adds a checkbox column in serials-search.pl tables that allow to edit
selected subscriptions.
The following fields can be modified:
- Bookseller
- Location
- Library
- Item type
- Public note
- Nonpublic note
- "Create item when receiving" flag
- Expiration date
+ the additional fields defined in serials/add_fields.pl
Test plan:
1. Go to Serials module
2. If there is no additional fields defined, define some (at least one with an
authorized value and one without)
3. Start a subscription search
4. Select some results using the checkboxes and click the "Edit" button above
the table
5. Select values for some fields (not all) and click "Start batch edit"
6. Verify you are being redirected to the previous search results
7. Verify that the fields for which you selected a value were modified and that
the others fields weren't
8. Repeat steps 4 to 7 but this time, modify the other fields.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Fri, 20 Apr 2018 10:07:19 +0000 (06:07 -0400)]
Bug 20622: Add some color to bootstrap modal headers and footers
Right now the bootstrap modal header, body and footer are all white. It would be nice to give them a bit of color.
Test Plan:
1) Apply this patch
2) Find a patron, click the 'add message' button
3) Note the modal header and footer now have a background color
Signed-off-by: Kyle M Hall <kyle@bywatetsolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 12 Dec 2017 17:14:56 +0000 (14:14 -0300)]
Bug 19287: Add ability to mark an item 'Lost' from 'Holds to pull' list
The goal to this enhancement is to add the ability to cancel a hold and
mark items as lost from the 'Holds to pull' page.
A new pref is added to control the behaviour, default is off
To mark items as lost you need to set the new pref CanMarkHoldsToPullAsLost to one of these two values:
- "Allow to mark items as lost"
=> The item will be marked as lost and the hold will be cancelled
- "Allow to mark items as lost and notify the patron"
=> Same as previously but the patron will be notified as well.
The notification is done using a new notice template (code=CANCEL_HOLD_ON_LOST).
Feel free to suggest another default wording.
To update the values of the items when one of these 2 buttons are used, you need to
fill the UpdateItemWhenLostFromHoldList with something like: 'itemlost: 1'
Test plan:
1/ Place holds on some items
2/ Go to Home > Circulation > Holds to pull
From here you can cancel the hold or
3/ Mark the items as lost
=> You will receive feedback messages depending on different situations:
* The CANCEL_HOLD_ON_LOST does not exist
* The patron does not have an email address (but the notice has been
enqueued! It is the current behaviour with other notices)
* The notice has been enqueued
* The hold has been cancelled
QA Notes:
From which library do we want to pick the notice? This patch use
reserves.branchcode
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jon Knight [Wed, 28 Mar 2018 16:29:43 +0000 (16:29 +0000)]
Bug 19479: Display price in basket group formatted according to CurrencyFormat syspref using templates.
On the page acqui/basketgroup.pl the prices of baskets should be shown
formatted according to the selected CurrencyFormat syspref, with no
currency symbol or code.
Test plan:
1) Create a basket with items in it worth more than 1000 currency units.
2) Close the basket.
3) Go to acqui/basketgroup.pl page and check that the price format matches
the current CurrencyFormat syspref.
4) Go to Administration and change CurrencyFormat syspref to one of the
other available options and recheck step 3.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed some tabs.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Katrin Fischer [Fri, 20 Apr 2018 20:25:08 +0000 (22:25 +0200)]
Bug 20400: (follow-up) Several fixes from RM review
- "your routing lists" tab is now highlighted when active
- get_routinglists was renamed to get_routing_lists
- Koha::Patron->get_routing_lists returns the ->search result
directly
- Koha::Subscription::RoutingList->subscription uses DBIC
relationship
- Undo changes to C4/Auth.pm
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Katrin Fischer [Thu, 15 Mar 2018 08:40:12 +0000 (08:40 +0000)]
Bug 20400: Add routing list tab in OPAC
This patch adds the base for the new feature:
Show a list of the serial titles a patron is on routing
lists for in the OPAC.
Test plan applies to the complete patch set:
To test:
- Apply all patches
- Make sure RoutingSerials is not activated
- Check patron account in OPAC - no tab should appear
- Activate RoutingSerials
- Create subscriptions and different routing lists, test with:
- Patron with no routing list entries = no tab
- Patron with one or more routing list entries = tab appears
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20400: Rewrite using Koha::Objects
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20400: Display new tab in OPAC only for patrons with routing lists
The visibility of the routing list tab in the OPAC depends
on the system preference RoutingSerials and the existence
of routing list entries for the patron.
Some libraries only offer routing lists to certain user groups and
would not want it generally visible. As there are currently no
actions you can perform from the list, this appears to be a
reasonable behaviour.
See test plan in first patch.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20400: (follow-up) Use Asset TT plugin on opac-routing-lists.tt
Patch applies and functions as described. Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20400: (QA follow-up) Redirect to 404 if routing is disabled
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves the Koha::Patrons->merge method into
Koha::Patron->merge_with in the line of the discussed implementation for
bug 15336. I agree with that implementation so I provide this follow-up.
Tests are adjusted, the controller script is adapted too. The behaviour
remains.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Fri, 12 Jan 2018 19:22:52 +0000 (14:22 -0500)]
Bug 9302: (QA follow-up) Copy merged patrons to deletedborrowers table
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Ed Veal <eveal@mckinneytexas.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Tue, 29 Aug 2017 17:55:59 +0000 (13:55 -0400)]
Bug 9302: Add ability to merge patron records
It would be great if there were a merge patrons feature. If you
accidentally end up with one patron with two cards it would be nice to
merge their records together so that you don't lose their history or
holds or anything.
This patch adds a basic patron merge feature. It attempts to relink all
patron related tables from the patron(s) to be merged. It does not
attempt to relink librarian account related tables at this time. This
feature does not attempt to automatically resolve issues such as
duplicate holds. Such a feature could build upon this one though.
Test Plan:
1) Apply this patch
2) Find two or more patrons
3) Perform a patron search that will bring them up on the same page of
results, or add them all to a list of patrons.
4) Use the 'merge' button to begin the merging process
5) Choose a patron to keep
6) Verify the deleted patrons data ( checkouts, holds, etc )
are now linked to the kept patron
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Ed Veal <eveal@mckinneytexas.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Fri, 19 Jan 2018 15:57:02 +0000 (15:57 +0000)]
Bug 20047: Add Koha::Z3950Server Oject and use it to get server count
To test:
1 - prove t/db_dependent/Koha/Z3950Servers.t
2 - Load cataloging and authority home pages
3 - Verify you can add form z395 on each page
4 - Delete all z3950 servers
5 - Viery option to add from Z3950 is removed on both pages
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Julian Maurice [Thu, 19 Apr 2018 11:33:21 +0000 (13:33 +0200)]
Bug 20619: Remove last occurrences of long gone syspref (opacsmallimage)
Code was commented anyway, so it was useless
Test plan:
1. Read the diff
2. Confirm that it only removes comments
3. Confirm that there are no remaining references to this syspref in the
code (only remaining references are in updatedatabase.pl and release
notes)
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Alex Arnaud [Fri, 22 Dec 2017 14:18:44 +0000 (14:18 +0000)]
Bug 19873: Ability to search on 0 value
Test plan:
- create a st-numeric index in zebra conf related to
a numeric field
i.e:
yourindex 1=yourindex 4=109
- fill a field with 0 in a biblio,
- reindex your biblios,
- search yourindex=0,
- should not work,
- apply this patch,
- test again,
- should work
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Fri, 26 Feb 2016 02:12:30 +0000 (21:12 -0500)]
Bug 15922: Show authorized value description in staff client search results for lost, withdrawn, and damaged
If an item in the staff client search results list is lost, withdrawn,
or damaged, the actual authorized value description for each of those
statuses should be displayed rather than the generic term. This patch
adds use of the AuthorisedValues template plugin to output the correct
description.
To test, apply the patch and perform a catalog search in the staff
client which will return results with various values for lost, damaged,
and withdrawn.
Confirm that the correct lost, damaged, or withdrawn status appears for
each item rather than the generic term.
Followed test plan, statuses appear as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Thu, 15 Jun 2017 12:32:43 +0000 (12:32 +0000)]
Bug 18799: XSLTresultsdisplay hides the icons
If item-level_itypes is turned off and XSLTResultsDisplay is turned on,
biblio-level itemtype images are not shown in staff client search
results. This patch corrects the problem.
This patch also adds some markup and CSS to the itemtype image to make
it look a litte cleaner and work better in result sets in which some
titles have images and some don't.
To test, apply the patch and view the staff client search results page
with various settings:
- XSLT turned on and off
- item-level_itypes turned on and off
- noItemTypeImages turned on and off
Confirm that item type images are shown or not shown correctly according
to each setting.
The difference between this patch and the other patch currently on this
bug is that this patch continues the practice of hiding biblio-level
itemtype information when item-level_itypes is ON.
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Josef Moravec [Wed, 18 Apr 2018 10:25:19 +0000 (10:25 +0000)]
Bug 20603: Remove ModNote, getcredits and getrefunds from C4::Accounts
Test plan:
0) Do not apply the patch
1) Run these 3 commands
git grep ModNote
git grep getcredits
git grep getrefunds
all should return occurances only in C4/Accounts.pm - the sub definition
and in t/db_dependent/Accounts.t
2) Apply the patch
3) Run commands from 1) again, now there should be no occurence
4) prove t/db_dependent/Accounts.t
should return green
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 28 Mar 2018 17:49:18 +0000 (14:49 -0300)]
Bug 20489: Remove warnings from the interface
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 28 Mar 2018 17:44:21 +0000 (14:44 -0300)]
Bug 20489: Prevent DB user login
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 16 Apr 2018 15:31:22 +0000 (12:31 -0300)]
Bug 20580: Make create_superlibrarian.pl accept parameters
So far this script does not accept parameters and create a koha/koha
superlibrarian
This patch makes it accept parameters to create a customized
superlibrarian patrons.
Test plan:
Use the script with valid and invalid paramters and confirm that it
works as expected.
Note: A cryptic "Invalid parameter passed" error is raised when the
categorycode is not valid. Better error handling must be provided but
Koha::Exceptions seems to be enhancement (see related bug reports).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 16 Apr 2018 20:41:42 +0000 (17:41 -0300)]
Bug 19030: Preserve link between order and subscription when editing an order
The aqorders.subscriptionid info is not sent to the template when the
order is edited. Which means we lose this link.
Test plan:
Create an order from a subscription
Edit the order
=> Without this patch, the aqorders.subscriptionid value is set to NULL
and items are created when receiving serial.
=> With this patch applied the link is preserved and expected behaviors
are preserved during all the acquisition workflow
You should also try and create several orders from the same subscription
Sponsored-by: BULAC - http://www.bulac.fr/ Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 19974: (QA follow-up) Do not use bar separator in atomic update
The multiple select saves the selected values with a comma.
Furthermore, preferences.pl also splits on a comma. In other words, the
upgrade will not work with the bar character. All options will be
deselected.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 2 Apr 2018 16:55:16 +0000 (13:55 -0300)]
Bug 19974: Make MarkLostItemsAsReturned multiple
Given the confusion regarding this behaviour it sounds better to make it
configurable.
This pref will take 4 different values, 1 per place an item can be
marked as lost.
Test plan:
Mark items as lost and confirm the item is returned or not, depending on
the value of the system preference.
- from the longoverdue cronjob (--mark-returned takes precedence if set)
- from the batch item modification tool
- when cataloguing an item
- from the items tab of the catalog module
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Fri, 23 Mar 2018 08:34:46 +0000 (09:34 +0100)]
Bug 19974: (QA follow-up) Move lost logic to else branch
If an error is raised for the barcode, we should not try to perform the
lost logic succeeding it.
Futhermore there is no need to go to GetMarcFromKohaField etc. if we just
use the output of ModItemFromMarc.
Note: It seems unnecessary to clear $itemnumber, but I can understand
the anxiety about passing it to the template with op=additem. So just
leaving it here.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
charles [Mon, 15 Jan 2018 21:20:10 +0000 (16:20 -0500)]
Bug 19974: Marking an item as 'lost' in additem.pl will not modify the current item
TEST PLAN:
1) Log in with your superlibrarian account
2) Borrow any book
3) Visit your Checkouts page, and click 'Show Checkouts'
4) Click on the item's barcode to visit the item's page
5) On the item's page, click the 'Edit' button, and choose 'Edit items'
6) In the items table, click the 'Actions->Edit' button of the item you borrowed
7) Mark that item as lost (it should be the first row of the form) and click the button 'Save changes'
8) Visit your Checkouts page. The item should still be there, despite BZ12363 claiming it should've been automagically returned
8.1) Your koha-log should also output a warning message: 'DBIx::Class::Storage::DBI::select_single(): Query returned more than one row...'
8.2) If you visit the item's page, the modification had no effect. It should not be marked as lost.
9) APPLY PATCH
10) Start back from step 2), but this time, after marking the item as lost, the item's page should
reflect the change, and the item you borrowed should've been automatically returned to the library
Signed-off-by: Jean-Manuel Broust <jean-manuel.broust@univ-lyon2.fr> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: Using $item->{itemnumber} instead of new variable.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Andrew Isherwood [Tue, 10 Apr 2018 15:50:56 +0000 (16:50 +0100)]
Bug 20556: Marking ILL request as complete..
When marking a request as complete, the status is updated internally
then the user to redirected to the view of the request.
Although the redirect header is sent, there is no exit to indicate that
the program flow should stop. As a result, an attempt is made to render
the template, which fails.
This patch simply adds the missing exit.
TEST PLAN
---------
- Create an ILL request
- "Manage request" > "Confirm request"
- "Mark completed"
- TEST: Ensure that no error is written to the error log upon clicking
"Mark completed"
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Tue, 27 Mar 2018 01:34:04 +0000 (01:34 +0000)]
Bug 20322: (follow-up) fix validator.w3.org complaints - extra /div
The intranet-bottom.inc has the closing div, just deleted
the last one.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Tue, 27 Mar 2018 01:32:16 +0000 (01:32 +0000)]
Bug 20322: (follow-up) use tooltips for warning
This puts similar old text into tool tips for the overdues.
Hover over the overdues, and the tool tips should appear and
be similar to what the text was before.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
projects / koha.git / log