David Cook [Mon, 2 Jul 2012 00:16:46 +0000 (10:16 +1000)]
Bug 7839 [ENH] : Add tab in patron record to show patron's routing lists
dcook: fixed SQL error and removed blank targets
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Thanks. Works as described. Valuable addition on patron information
page.
Ideas of enhancement:
- For some library, and some patron, the routing lists table could be
very long, and a paged table would be a plus.
- In the table, a new Vendor column.
- The possibility to sort the table entries by Title and Vendor column.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Kyle M Hall [Tue, 10 Jul 2012 14:57:46 +0000 (10:57 -0400)]
Bug 8408 - Odd OPAC message when OPAC Renewals are disabled and OPACFineNoRenewals is set to blank
If OpacRenewalAllowed is set to "Don't allow" and OPACFineNoRenewals is set to blank ( i.e. disabled ).
A user who owes any fines, when logged in to the OPAC will receive the following message:
Please note: You have more than 0.00 in fines.
This is a rather odd message, and is not very sensible. The message should either be modified or removed altogether.
This patch modifies the message to the following:
Please note: You currently owe $fines in fines
where $fines in the formatted amount the borrower currently owes
in fines.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Marc Veron [Sun, 29 Jul 2012 07:30:54 +0000 (09:30 +0200)]
Bug 8518 - Self checkout does not display debt amount if syspref AllowFineOverride is set to allow
If the patron has depts that prevent issuing and the system preference 'AllowFineOverride' is set to 'allow', the amount is not displayed in the user message.
Additionally, patch adds currency symbol to amount.
Test plan:
Do self checkout with patron who has debts that are over the limit.
Test with and without preference 'AllowFineOverride' set.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Jonathan Druart [Tue, 10 Jul 2012 14:00:54 +0000 (16:00 +0200)]
Bug 7955: Followup : Check the syspref value (avoid sql injection)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Works as expected. Fields with disallowed characters do not show up.
Added 'if $debug' to an pseudo-unconditional warn.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 8207: Allow see also fields in auths to link to thesauri
Right now if you were to link a field in an authority to a thesaurus, it
would not work properly. The authority type frameworks require some
adjustments to allow see also headings to be linked to thesauri (such as
adding subfield $9).
This patch adds subfield $9 and thesaurus links to existing installs
for those 5xx fields (under MARC21 and NORMARC only) which do not yet
have any subfield $9 or thesauri configured, as well as adding that to
new English language installs. There will be a follow-up patch adding
the subfields to new non-English language install files later, once
it is clear that the changes proposed and demonstrated in the English
files are accepable to the community.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested frameworks install cleanly on a new installation.
Tested database update and made sure, that configuration and subfields
of a field were not changed if
- a $9 subfield already existed for a 5xx field
- a $9 subfield and a link to another thesaurus in $a existed
- no $9 but a link to another thesaurus in $a existed
Chris Cormack [Sat, 28 Jul 2012 08:07:36 +0000 (20:07 +1200)]
Bug 8486 - Follow up making the tests db independent
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Makes the test db independant by specifying the date format. Thus, there is no call to ->preference() that retrieve a systempreference
Bug 8204: Add user friendly authority view to OPAC
Up until now, the only authority view in the OPAC was a
rather-unfriendly expanded MARC view. This patch adds a user-friendly
view similar to the biblio details view.
Specific features to be aware of:
* Right-to-left text in the MARC21 880 field will show up in the
appropriate location with the appropriate alignment and wrapping
* There is very little CSS styling. Any suggestions for how to make
the display more attractive would be gratefully received.
To test:
1) Do a search for an authority in the OPAC.
2) Choose an authority record to view.
3) Observe that the view is more user-friendly and polished.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works very nicely now. The old view is still available, but the
user is presented with a nicer non-MARC view first.
Bug 8208 follow-up: move Clear and Create new buttons out of results
Turns "Clear" and "Create new" links into buttons that are visible
before a search is performed, so that the user does not have to do
a search just to clear the field or create a new authority. This
commit also changes the formatting from textual links to buttons.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Nicer and more logical display.
Allows creating of a new authority without doing a search first
or when no results were found.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
When performing subject analysis, it is not uncommon to find that an
authority record you need does not exist. This commit adds a link in
the search results to enable the cataloger to create an authority on
the fly and have the heading populated by the new authority.
To test:
1. Use the auth finder plugin the cataloguing module to search for a
heading you do not have an authority record for.
2. Click the "Create new" link.
3. Fill in your authority and save it.
4. Note that the heading field was populated with the data you entered
in the authority record.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
1) Added a new authority using the plugin
2) Used an existing authority using the plugin
3) Created a new authority in the authority module
Elliott Davis [Wed, 11 Jul 2012 03:38:28 +0000 (22:38 -0500)]
[PATCH] bug_7420: Added overduefinescap to issuingrules
Replaced existing MaxFine syspref logic with overduefinescap.
Repurposed MaxFine to be the overall overdue limit for all items
overdue. Implemented new MaxFine logic in UpdateFine().
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Tested according to Srdjan's test plan and everything worked like he said it would. I set fined equal to $2 and max fine equal to $1. When I ran the fines script for overdue items fines assessed were only $1.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Colin Campbell [Wed, 25 Jul 2012 09:55:56 +0000 (10:55 +0100)]
Bug 8486 Merge Calendar test files
Moves the tests previously in t/Kalendar.t to t/Calendar.t
and removes the old file.
Note the existing minimal test of C4/Calendar still called in
t/Calendar
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
HTML::FormatText is used by Template::Plugin::HtmlToText which is called in the template for opac-sendbasket.pl.
This is not a core Perl 5.10 module. I had to install it additionally on a test server. So I am adding it to PerlDependencies.
I just picked an old version 1.23 that I still could find as min_ver.
Changed the version information for Test::Strict too (not required, only for tests).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Jonathan Druart [Thu, 16 Feb 2012 13:32:03 +0000 (14:32 +0100)]
Bug 7302: Export basketgroup as CSV
Adds new action export for basketgroup.
This action is available only if your basketgroup is closed.
This export generates a csv file with order informations.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested together with bug 5356.
Julian Maurice [Fri, 6 Jul 2012 10:31:48 +0000 (12:31 +0200)]
Bug 8376: New script to export borrowers misc/export_borrowers.pl
This script prints to standard output what is returned by
GetMemberDetails in CSV format.
Exported fields can be specified with option -f. If no -f option is
specified, all fields are exported.
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com> Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Amended with some code to better handle bad data.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
David Cook [Fri, 13 Jul 2012 01:50:04 +0000 (11:50 +1000)]
Bug 8434 - Notice generation fails for Advanced Notices, Item Due, and Overdues when run in shell (due to error in Letters.pm)
Patch introduces a check for C4::Context->userenv in Letters.pm, so that script doesn't fail when it calls to C4::Context->userenv->{branch}, when run from shell.
Without the check, Advanced Notices, Item Due, and Overdues fail to generate.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
David Cook [Mon, 16 Jul 2012 04:13:31 +0000 (14:13 +1000)]
Bug 8448 - Holds Awaiting Pickup : Cancelling a hold on a waiting item with multiple holds displays a blank screen instead of a warning prompt
When you cancel a hold in the "Hold Waiting" tab of Holds Awaiting Pickup, you should be prompted to retain or transfer the hold for the next patron in the queue. However, instead of seeing this prompt, you are just shown white screen that fails to alert you to the fact that there are more holds on that item!
There is a missing FOREACH reference in waitingreserves.tt. The template tries to directly reference the hash within the cancel_results array, but we need to access the array before we can access the hash.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
- remove all exit(1) and replace them with __END__ which benefits CGI
- insert correct =cut markers at end of POD (required for CGI::Compile
under plack to correctly parse source code and exeute it)
- scope variables with our which are used inside sub for plack
Signed-off-by: Mirko Tietgen <5p4m@gmx.de> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Kyle M Hall [Thu, 8 Oct 2009 12:13:13 +0000 (12:13 +0000)]
BugFix - ReturnToShelvingCart
If the ReturnToShelvingCart syspref is on, and something needs to go in transit,
the shelving cart setting is overriding the transit.
What seems to be happening is this:
* Item is checked in, and flagged as needing to go in transit from A to B.
* Item is immediately flagged as shelving cart, though. Current display says both shelving cart and in transit.
* After the cart-to-shelf script runs, item comes out of transit and
shows as being available at the destination library, although it hasn't
arrived yet and no one has manually checked it in.
I did not document the 'tags' table in this patch
because it looks like this table is unused, so I
need confirmation of that before marking it as
'unused.'
This table has a lot of fields that I never see any values in.
All have been noted in the documentation and I welcome any
additional info about how these fields might be used.
Owen Leonard [Tue, 10 Jul 2012 17:56:26 +0000 (13:56 -0400)]
Bug 8130 [FOLLOW-UP] attach PDF files to a patron record
Markup corrections:
- Hide table of files if no files are attached
- Move error messages out of table (invalid)
- Add <tr> tags to table (invalid)
- Apply standard form structure to upload form
- Add proper labels and ids to upload form
- Correct unescaped ampersands
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Tue, 17 Jul 2012 12:53:57 +0000 (20:53 +0800)]
Bug 8458 - $stemmed_operand in C4::Search _build_stemmed_operand is not initialized. Added =q{} to initialize it to the empty string at declaration time.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
David Cook [Thu, 12 Jul 2012 01:26:56 +0000 (11:26 +1000)]
Bug 8422 - Fix impossible warning in circulation.pl when OverduesBlockCirc set to Block
Previously, the message Patron has x overdue item(s). Checkout anyway? was shown when syspref OverduesBlockCirc was set to Ask for confirmation or Block.
This patch changes the message for Block to: Checkouts are BLOCKED because patron has overdues.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 6720 follow-up: use authtypetext instead of summary
Although auth_types.summary contains a string describing the type of
authority in MARC21, it does not in UNIMARC. auth_types.authtypetext
contains the proper label in both marcflavours.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Due to a peculiarity in the way SearchAuthorities worked, the authority
search results on the OPAC always listed the authority type that the
user searched for, rather than the authority type of the results.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, result list for OPAC search now shows the authority type
for each record.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased 20 June 2012.
Signed-off-by: Mirko Tietgen <5p4m@gmx.de>
Works as expected.
Bug 8386: Error in duplicate detection message for authorities
If you create a new authority record and the name already exists in
your database, you get a duplicate warning. This is good, but there is
a small error in the message:
Duplicate record suspected
Is this a duplicate of HASH(0x47fa670)?
This patch corrects the error message to show the title.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Error message correctly shows the name after applying this patch.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Owen Leonard [Mon, 9 Jul 2012 19:48:23 +0000 (15:48 -0400)]
Bug 8398 - Missing image file in staff global css
This patch fixes a regression introduced by the fix for
Bug 6855 (bullet point showing in wrong place on error message)
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=6855
The patch removes the re-introduced reference to a
background image which has since been removed. Testers should
check that this patch does not re-introduce Bug 6855.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I checked the styling of the error messages in Chromium and Firefox.
The logs are no longer complaining about the missing image.
Looks good to me.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Katrin Fischer [Sat, 14 Jul 2012 09:37:42 +0000 (11:37 +0200)]
Bug 8381: Fix adding limits to search history for logged in users
Due to renaming of some variables the limits were only working for 'anonymous'
users. This patch fixes some variables, so limits are also added to history
when the user is logged in.
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Alex Arnaud [Fri, 13 Jul 2012 09:13:47 +0000 (11:13 +0200)]
Bug 8381 - Paging broken in OPAC search results
Fix also freezing for some browser when performing a search query.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Checked paging (previous, next and navigating to page numbers) works.
Browser performance is fixed too.
Kyle M Hall [Wed, 6 Jun 2012 13:41:02 +0000 (09:41 -0400)]
Bug 8063 - Followup - Bug fix
$OUTPUT being used but not being declared.
When trying to run this script I gat a nasty:
15:42 ~/koha.dev/koha-community (new/bug_8063 $%)$ ./misc/cronjobs/gather_print_notices.pl
Global symbol "$OUTPUT" requires explicit package name at ./misc/cronjobs/gather_print_notices.pl line 81.
Global symbol "$OUTPUT" requires explicit package name at ./misc/cronjobs/gather_print_notices.pl line 95.
Global symbol "$OUTPUT" requires explicit package name at ./misc/cronjobs/gather_print_notices.pl line 102.
Global symbol "$OUTPUT" requires explicit package name at ./misc/cronjobs/gather_print_notices.pl line 106.
Global symbol "$OUTPUT" requires explicit package name at ./misc/cronjobs/gather_print_notices.pl line 120.
Global symbol "$OUTPUT" requires explicit package name at ./misc/cronjobs/gather_print_notices.pl line 127.
Execution of ./misc/cronjobs/gather_print_notices.pl aborted due to compilation errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Before the patch:
$perl -wc ./misc/cronjobs/gather_print_notices.pl
Global symbol "$OUTPUT" requires explicit package name at
[...]./misc/cronjobs/gather_print_notices.pl line 81.
./misc/cronjobs/gather_print_notices.pl had compilation errors.
With this patch:
$perl -wc ./misc/cronjobs/gather_print_notices.pl
./misc/cronjobs/gather_print_notices.pl syntax OK
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Kyle M Hall [Tue, 22 May 2012 12:05:05 +0000 (08:05 -0400)]
Bug 8063 - Followup - Make C4/Letters.pm conform to PBP
Perlcritic reported the following errors:
Subroutine prototypes used at line 96, column 1. See page 194 of PBP. (Severity: 5)
Subroutine prototypes used at line 120, column 1. See page 194 of PBP. (Severity: 5)
Subroutine prototypes used at line 152, column 1. See page 194 of PBP. (Severity: 5)
Subroutine prototypes used at line 173, column 1. See page 194 of PBP. (Severity: 5)
Subroutine prototypes used at line 190, column 1. See page 194 of PBP. (Severity: 5)
Subroutine prototypes used at line 227, column 1. See page 194 of PBP. (Severity: 5)
"return" statement with explicit "undef" at line 228, column 31. See page 199 of PBP. (Severity: 5)
"return" statement with explicit "undef" at line 229, column 31. See page 199 of PBP. (Severity: 5)
"return" statement with explicit "undef" at line 236, column 9. See page 199 of PBP. (Severity: 5)
Subroutine prototypes used at line 668, column 1. See page 194 of PBP. (Severity: 5)
"return" statement with explicit "undef" at line 669, column 27. See page 199 of PBP. (Severity: 5)
Subroutine prototypes used at line 719, column 1. See page 194 of PBP. (Severity: 5)
Subroutine prototypes used at line 865, column 1. See page 194 of PBP. (Severity: 5)
Subroutine prototypes used at line 899, column 1. See page 194 of PBP. (Severity: 5)
Subroutine prototypes used at line 981, column 1. See page 194 of PBP. (Severity: 5)
"return" statement with explicit "undef" at line 982, column 28. See page 199 of PBP. (Severity: 5)
Subroutine prototypes used at line 1000, column 1. See page 194 of PBP. (Severity: 5)
"return" statement with explicit "undef" at line 1001, column 27. See page 199 of PBP. (Severity: 5)
"return" statement with explicit "undef" at line 1004, column 9. See page 199 of PBP. (Severity: 5)
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Bug 8251 - Follow up, use 'day' instead of 'days' for Datetime::truncate
As noted in comment #4 by Jonathan Druart, this should be fixed in every call
to DateTie::truncate function. This patch does exactly that.
julian_m tested that truncate( to => 'days' ) didn't actually do anything, so
it is understandable that this 'fix' might introduce new bugs as we might have
'fixed' at a higher libs level this issue.
'minutes' is used in truncate function too, so fixing.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org> Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
projects / koha.git / log