Jonathan Druart [Mon, 31 Oct 2016 11:16:05 +0000 (11:16 +0000)]
Bug 17453: Allow pickup at a library where all items are checked out
If all items are checked out then it should be possible to select the pickup
library for that record.
Signed-off-by: Janet McGowan <janet.mcgowan@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14753
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 24 Oct 2016 09:02:19 +0000 (09:02 +0000)]
Bug 17453: Add exceptions
This patch adds the ability to define patron categories not affected by
the behavior of OPACHoldsIfAvailableAtPickup.
The new pref OPACHoldsIfAvailableAtPickupExceptions get a list of patron
categories (separated by pipes |).
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14753
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 18 Oct 2016 13:02:58 +0000 (14:02 +0100)]
Bug 17453: Inter-site holds improvement
At the moment users can reserve items and choose any library as a pick up
location, but there is no mechanism to prevent users from reserving items that
are available on the shelf at any given location from reserving the item at the
same location, essentially creating a Fetch and Collect scenario.
This has an impact on staff workloads as they are having to process reservations
and check shelves for items that students can already come and collect from the
open library shelves.
The aim of this enhancement is to decrease the impact on staff workload there
should be a restriction in place that prevents users from requesting items for
collection at a library where the item is currently available.
Implementation:
We first tried to add a new circulation rule adding a 4th
“NotIfAvailableAtPickupLibrary” option to "On shelf holds allowed".
That would make the development more flexible.
But in that case we quickly faced non-trivial problematics:
Let's say you have 3 items I1, I2 and I3. The first one has onshelfholds
set to Yes and 2 others has it set to “NotIfAvailableAtPickupLibrary”.
What would be the expected behavior if a hold is placed at biblio level?
And if a hold is placed at item level for I1?
This second point could be answered by reworking the interface to move
the libraries dropdown list elsewhere (1 list per item) or by adding a
lot of JS code to handle the different situation. But it would be
much more complicated to implement.
So finally I moved back to the simple approach and added a new pref to
handle the behavior globally.
Test plan:
0/ Switch off OPACHoldsIfAvailableAtPickup
1/ Let's say you have 3 libraries L1, L2, L3, create 2 items owned by L1
and L2
2/ Place a biblio level hold. You should only be able to pick it up at
L3
2/ Place a item level hold. You should only be able to pick it up at
L3
3/ Create a third items owned by L3
4/ Now you should not be able to place a hold on this record anymore
Sponsored-by: University of the Arts London Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14753
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Thu, 2 Feb 2017 04:16:53 +0000 (04:16 +0000)]
Bug 14405: Add datatables to fines table in OPAC
To test:
1) Apply patch
2) Go to OPAC -> Your account
3) Confirm you can now sort on all columns
Sponsored-by: Catalyst IT
NOTE: NICE!
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Thu, 2 Feb 2017 23:30:43 +0000 (23:30 +0000)]
Bug 11932: Move delete checkbox on patron modification to right
To test:
1) Go to Tools -> Batch patron modification
2) Put in a user cardnumber and click Continue
3) Notice checkboxes on the left of the input fields
4) Apply patch and refresh page (resend information if prompted)
5) Notice checkboxes on the right of the input fields
6) Confirm they still work as expected
Sponsored-by: Catalyst IT
NOTE: Why not left before the label? And while functional,
is there a pretty align it nicely with all the other
checkboxes CSS styling somehow?
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Wed, 15 Feb 2017 00:03:28 +0000 (00:03 +0000)]
Bug 7626: Delete multiple tags in OPAC at once
This patch removes the individual 'Delete' buttons for every tag as
suggested in Comment 0. It adds a checkbox to every tag, with a 'Delete
selected tags' button at the bottom of the table. This patch also adds a
function to check if any checkboxes have been checked before submitting
the form (only works with JS enabled).
To test:
1) Find a record in the OPAC and add some tags to it
2) Go to your tags and notice the checkboxes, no more delete buttons for
each tag
3) Click 'Delete selected tags' button without selecting any tags
4) Confirm alert shows up. Click OK
5) Select one or more tags and click 'Delete selected tags' button
6) Confirm delete is successful and correct number of deleted tags shows
up
Sponsored-by: Catalyst IT
Followed test plan, works as expected Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
David Cook [Mon, 13 Feb 2017 05:39:41 +0000 (16:39 +1100)]
Bug 18099 - Put call number in its own column on inventory screen
TEST PLAN
0) Apply patch
1) Create an item with a call number in 952$o (e.g. ABC 123)
2) Using the inventory tool, make sure you "Select items you want to check"
which include that item (e.g. Item callnumber between: A and C)
3) Click "Submit"
4) The call number appears in the column marked "Call number"
instead of appearing as [ABC 123] under the library in the
"Library" column
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Julian Maurice [Mon, 6 Feb 2017 13:58:06 +0000 (14:58 +0100)]
Bug 18063: Remove dead code from tools/manage-marc-import.tt
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Thu, 2 Feb 2017 22:58:34 +0000 (22:58 +0000)]
Bug 18040: Updating buttons in Tools -> Upload local cover image
To test:
1) Go to Tools -> Upload local cover image
2) Select an image and click Upload file
3) Notice Process images button looks different to Upload file button
4) Apply patch and refresh page
5) Follow steps 1-3 again and notice the changed styling of the buttons
Sponsored-by: Catalyst IT Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 3 Feb 2017 07:08:07 +0000 (08:08 +0100)]
Bug 18036: [QA Follow-up] Descriptions and mock_preference
Adjusted a few test descriptions.
The test depends on template being set to prog. Made that explicit by
adding a mock_preference. If you change the mock to bootstrap, this
test will fail.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TEST PLAN
---------
1) apply 17982
2) perlcritic -3 t/db_dependent/Templates.t
-- messages
3) apply this patch
4) perlcritic -3 t/db_dependent/Templates.t
-- OK
5) run koha qa test tools
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 19 Jan 2017 17:03:55 +0000 (18:03 +0100)]
Bug 17968: Remove useless variable $item_format in C4::Overdues::parse_overdues_letter
The variable $item_format is not used and should be removed from this
subroutine.
Moreover it the letter parameter, but it is never sent to this
subroutine. letter_code is expected instead.
Test plan:
No test plan, just read the code and `git grep `
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Mon, 23 Jan 2017 22:32:39 +0000 (22:32 +0000)]
Bug 17947: Searching my library first shows the branchcode by the search bar rather than branchname
Test Plan
1: Turn on SearchMyLibraryFirst and go into OPAC
2: It should say Search (in <Branch Code> Only)
3: Apply patch and refresh page. It should now say Search (in <Library Name> only)
Sponsored-by: Catalyst IT Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Fri, 13 Jan 2017 00:19:48 +0000 (00:19 +0000)]
Bug 17895: 'Re-set' typo fix
To test:
1) Log into OPAC and go to change your password
2) Enter current password incorrectly and click Submit changes
3) Observe error message and typo 're-set'
4) Apply patch and refresh page
5) May be asked to resend data - if so, click Resend, if not, repeat
step 2
6) Observe error message and corrected spelling of 'reset'
Sponsored-by: Catalyst IT Signed-off-by: Caitlin Goodger <caitlingoodger.student@wegc.school.nz> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Wed, 4 Jan 2017 16:11:03 +0000 (16:11 +0000)]
Bug 17846: Remove get_infos_of declaration
The function which was removed was still being exported.
This removes it completely.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 4 Jan 2017 11:39:18 +0000 (12:39 +0100)]
Bug 17846: Remove C4::Koha::get_infos_of
This subroutine does not longer make any senses. The call to
get_infos_of can be replaced with $dbh->selectall_hashref.
The third argument of this subroutine was never used.
Test plan (for developer only):
Compare the 2 codes and confirm that they are equivalent
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Mon, 9 Jan 2017 14:53:11 +0000 (14:53 +0000)]
Bug 17793: Follow up for identified missing changes
I ran:
$ git grep -l cat-search.inc | grep admin
This means I believe the outstanding ones are
(koha-tmpl/intranet-tmpl/prog/en/modules/):
- admin/auth_subfields_structure.tt
- admin/clone-rules.tt
- admin/marc_subfields_structure.tt
- admin/searchengine/elasticsearch/mappings.tt
One other was recommended by Katrin in comment #9:
- plugins/plugins-home.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Mon, 19 Dec 2016 22:56:12 +0000 (22:56 +0000)]
Bug 17793: Make sysprefs search show on all Admin pages
This patch is amended to use the sysprefs search on all Administration
pages that do not have their own custom search.
To test:
1) Go to Administration
2) Notice Catalogue search at the top - seems out of place.
3) Apply patch and refresh page.
4) Notice admin / sysprefs search now shows and is more appropriate.
5) Confirm searching for sysprefs still works
Sponsored-by: Catalyst IT Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the tests create its own data instead of searching the
DB for a branchcode and a categorycode. It does so on each subtest,
because there shouldn't be side effects between subtests.
I also wrapped each subtest inside a transaction, for the same reason.
To test:
- Apply this patch
- Run:
$ prove t/db_dependent/Koha/Object.t
=> SUCCESS: Tests return green with this patch
- Sign off :-D
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds unit tests for the Koha::Object::TO_JSON function.
It tests on top of Koha::Patron as Koha::Object needs to be
instantiated.
To test:
- Apply the patch
- Run:
$ prove -v t/db_dependent/Koha/Object.t
=> SUCCESS: New tests for TO_JSON are run and return green.
- Sign off :-D
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17927 introduced data type fixes on the /patrons endpoint (integer
and boolean types got fixed). This led to the /patrons endpoint not to
work because the underlying code didn't provide the right data.
With the introduction of TO_JSON on Koha::Object(s) we now have a way to
output the proper data types.
This patch does so by:
- Adding is_boolean => 1 to the relevant columns on the Borrower.pm
schema file.
- Tweaking the controller class for the /patrons endpoint so it doesn't
use the $object(s)->unblessed call but just let the Mojo::JSON library
pick out TO_JSON implementation instead on rendering the output.
- It adds a new test for booleans.
[1] It is self explanatory to just try the API using any of the
available tools (I use HttpRequester on Firefox)
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17932: Add a TO_JSON method to Koha::Object(s)
Bug 17927 fixes data types on the current REST endpoints. If you
test those endpoints, you will notice trying to access them (for listing
or retrieving single objects yields a data type error. Notably on
booleans but also on integers.
Integers fail due to https://rt.cpan.org/Ticket/Display.html?id=119904
but it needs some global solution until there's a DBD::mysql release
backported to the supported distros. There's the option to use
http://search.cpan.org/~frew/DBIx-Class-Helpers-2.033002/lib/DBIx/Class/Helper/Row/NumifyGet.pm
to get the integer columns fixed as a workaround:
I didn't find bug reports related to this (maybe because we don't use
warnings everywhere) But I don't think is worth going such a heavy
overhead.
A similar situation takes place for Boolean values. They need to be
prepared for JSON output. This could have been done using DBIx filters
as pointed out by Martin:
__PACKAGE__->filter_column(
lost => {
filter_to_storage => sub { $_[1] ? 1 : 0 },
filter_from_storage =>
sub { $_[1] ? Mojo::JSON->true :
Mojo::JSON->false }
}
);
but this could have other consequences that are worth exploring on
another bug (i.e. it would mean we need to take care of every place
where this boolean data is used/set needs to handle this data types
nicely. Such would be the case if we were a Mojo-only app, but we
aren't. We use Koha::Obect(s) in the whole app. Period.
This patch adds the need to specify on the schema files, columns that
are actually boolean, because we have no way to detect them for now
(i.e. they are all tinyint, but we use tinyint for non-boolean stuff
too).
So if this patch is accepted, we would need to specify boolean columns
like this:
This patch adds a TO_JSON method for Koha::Object(s) to be used for
serializing Koha::Object-derived objects into JSON strings.
To test it (as Koha::Object(s) need to be instantiated) I provide tests
on top of the Koha::Patron(s) classes in the followup patches.
[1] Yes, we use TINYINT(1) for booleans, but from DBIC's perspective
there's no way to read the (1) in runtime.
Sponsored-by: ByWater Solutions Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
remi [Wed, 9 Mar 2016 16:48:31 +0000 (11:48 -0500)]
Bug 16018: Merge.pl code cleanup
Original patch from Remi Mayrand-Provencher.
Amended by Marcel de Rooy (January 2017), part of omnibus bug 17908.
EDIT:
We cannot remove the ModAuthority call, since the reference record is
the result of the merge and should be saved.
Variable $overwrite is not used and can be removed.
It is not useful to postpone a merge to the cron job here, since the
old authority record is deleted. (Note that bug 9988 will address this
subject too.)
Removing the call to C4::ImportBatch::SetImportRecordStatus: Since
$recordid2 is not an import_record_id, this is useless and potentially wrong.
Removed the if statement for @errors, since it is not used at this point;
putting the result of a comparison into $error is not useful either.
Note: there is a lot of code in merge.pl around breeding that is actually
unused. Template tools/manage-marc-import.tt contains two unused blocks
final_match_link and match_link that contain a (unreachable) call to
authorities/merge.pl with parameters:
mergereference=breeding&authid=[% record_lis.match_id %]&authid=[% record_lis.import_record_id %]
It seems that this would show the records correctly, but would not merge
them correctly since that code expects two authority records.
Leaving the signoff of Mehdi since he essentially tested the merge call.
Test plan:
[1] Restart Plack and restart koha-indexer. (I had some problems related to
indexing as a result of the marcxml transition.)
[2] Go to Authorities.
Select two authorities to merge, start with two of the same type.
Make sure that both are used in a few biblio records.
Select at least one subfield from the authority to be removed for
inclusion in the authority to be kept ("reference record").
[3] Click Merge. You come back to the kept authority record.
Note: The number of attached records may not yet be updated. This depends
on the speed of koha-indexer. If you wait a bit and refresh, you should
have the correct number.
First check the authority record again for the inserted subfield.
Now check a biblio that was ALREADY attached to the reference record.
And check a biblio that was FORMERLY attached to the deleted one.
Note: See bug 17913 to see how pref AuthorityMergeMode impacts this.
[4] Try steps 2 and 3 again for a merge of two authority records that do not
have the same authority type noting the remarks below.
For instance try to merge from a CORPO_NAME to a PERSO_NAME record.
Make a change in say 040$a of the record to be deleted. And select that
field later on the merge form.
Normally, you would use the PERSO_NAME framework in the merge now.
When checking the authority record, look at 040a. When checking the
record that was linked to the CORPO_NAME, check if it contains the
PERSO_NAME authority in the correct field (say 100, 600, 700).
Signed-off-by: mehdi <mehdi@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested merging PERSO_NAME to PERSO_NAME and PERSO_NAME to CORPO_NAME.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 13 Feb 2017 07:56:17 +0000 (08:56 +0100)]
Bug 16749: Go with a boolean flag, we love booleans
As requested by Jonathan on comment 10 on Bugzilla and supported by Tomas,
we should use the dev_install entry in koha-conf as a boolean flag.
Since we already used it as a path, this patch is not too strict about it.
If the entry is not empty and not equal to "0", we will interpret it as
a true value. The path is taken from the intranetdir entry.
Test plan:
[1] Copy debian/scripts/koha-functions.sh to /usr/share/koha/bin
[2] For a dev install:
Remove the dev install line, or toggle its value between empty string,
0 or 1 and each time test stop/start koha-indexer.
Check the path to rebuild_zebra with ps aux|grep indexer.
If you have no entry, an empty entry or a zero, you should see a regular
path.
(Note: You can do something similar with koha-start-sip.)
[3] For a regular install:
Remove the dev install line.
Stop/start koha-indexer or koha-plack, and verify that it still works.
Add a dev_install line with 0, and repeat stop/start.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Thu, 16 Jun 2016 08:38:54 +0000 (10:38 +0200)]
Bug 16749: Adjustments for koha-translate
[AMENDED February 10, 2017]
[1] Added reading /etc/default/koha-common as in the other debian scripts.
We need it for KOHA_HOME.
[2] Add a -d|--dev parameter for dev installs.
[3] No hardcoded PERL5LIB or KOHA_INSTALL_DIR (KOHA_HOME).
They are read from default file or set by adjust_paths_dev_install.
[4] Adjust template paths for dev installs: OPAC_TMPL, INTRANET_TMPL.
[5] Remove references to obsolete themes ccsr and prog.
Test plan:
[1] Regular package install:
Copy koha-translate to /usr/sbin.
Run koha-translate -l to show installed languages.
Run koha-translate -l -a to show available languages.
Add a language: koha-translate -i nl-NL.
Check template folders in regular location (/usr/share/koha/...)
Remove a language: koha-translate -r nl-NL. Check again.
[2] Dev install or kohadevbox:
Copy koha-translate to /usr/sbin.
If needed, add the <dev_install> line to koha-conf.xml.
Run koha-translate -l -d yourinstance to show installed languages.
(Note: You only see the languages installed in this instance.)
Add a language: koha-translate -i nl-NL -d yourinstance.
Check template folders in the clone.
Remove a language: koha-translate -r nl-NL -d yourinstance.
Note: Make sure you have sufficient file permissions for the kohaclone
files and koha-conf.xml. On kohadevbox you might need to run sudo
koha-translate within the the vagrant user context.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested on Jessie (Debian VM and Kohadevbox)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 10 Feb 2017 09:33:57 +0000 (10:33 +0100)]
Bug 16749: Adjustments for koha-plack
[1] Use run_safe_xmlstarlet for plack workers and requests
[2] Simplify adjust_paths. The lazy export statement is actually enough to
replace adjust_paths by one direct call to adjust_paths_dev_install.
Test plan:
[1] Copy koha-functions.sh and koha-plack:
cp [YOUR_PATH]/debian/scripts/koha-functions.sh /usr/share/koha/bin/
cp [YOUR_PATH]/debian/scripts/koha-plack /usr/sbin/
where YOUR_PATH might well be /home/vagrant/kohaclone.
[2] Make sure that you have dev_install in koha-conf.
Stop and start koha-plack. Verify with ps aux|grep plack.
[3] Rename dev_install to nodev_install (in start and end tag).
Now stop/start koha-plack. Verify with ps aux|grep plack.
[4] Change plack_requests to 51 in your koha-conf.
Restart Plack and check that you see 51 in ps aux|grep plack.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested on Jessie (Debian VM and Kohadevbox)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Fri, 10 Feb 2017 08:37:13 +0000 (09:37 +0100)]
Bug 16749: Adjust xmlstarlet calls in koha-functions
In various scripts we use xmlstarlet to extract values from koha-conf.
If we call xmlstarlet on non-existing entries in koha-conf, this may
however result in silently failing scripts (when set -e is in effect).
A function run_safe_xmlstarlet is added for situations where the entry
might not exist. It will not halt execution.
This patch only adjusts koha-functions.sh and modifies the xmlstarlet calls
for dev_install and zebra_loglevels.
Note: The function does not need to check file existence. If the file does
not exist, xmlstarlet warns about it; the function returns empty string,
but does not set an error exit status.
Test plan: See second patch ("koha-plack adjustments").
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 25 Jan 2017 10:33:43 +0000 (11:33 +0100)]
Bug 17990: Refactor Perl module versions check
The code is duplicated, variable are not set ($_), code is hard to read,
not covered by tests and the subroutine has 2 completely different
behaviors depending on the presence of the "module" parameter.
No need more ti rewrite it.
Test plan:
- Use koha_perl_deps.pl with the different options (-u -m -a -i)
- Go on the about page, "Perl modules" tab
You should not see any differences from before and after this patch
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Mon, 23 Jan 2017 22:41:15 +0000 (22:41 +0000)]
Bug 17977: Add acquisitions sidebar menu to suggestions
To test:
1) Go to Acquisitions -> Suggestions
2) Notice no acquisitions sidebar
3) Apply patch and refresh page
4) Sidebar menu should now show.
Sponsored-by: Catalyst IT Signed-off-by: Claire Gravely <claire_gravely@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Thu, 16 Feb 2017 11:04:11 +0000 (11:04 +0000)]
Bug 17974 (QA Followup)
Use the $biblio_rs variable
In case of Koha::Object you can call new_from_dbic directly, however,
it fails for Koha::Objects so using an intermediary variable should
be done for consistency
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Sat, 21 Jan 2017 15:47:03 +0000 (16:47 +0100)]
Bug 17973: Add the Koha::Checkout->item method
Test plan:
prove t/db_dependent/Koha/Checkouts.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Mon, 23 Jan 2017 15:57:54 +0000 (15:57 +0000)]
Bug 17972 - Reformat acquisitions sidebar menu with acquisitions and administration sections
This patch makes changes to acquisitions-menu.inc so that the style
matches that of the Administration and Tools sidebar menus. The links
are now divided up between Acquisitions (/acqui/) and Administration
(/admin/). The link-highlighting JavaScript used elsewhere has been
added.
To test, apply the patch and view the Acquisitions home page.
- Check that the "Acquisitions home" link is highlighted (bold).
- Test the other Acquisitions links to confirm that highlighting works.
- Click any link in the Administration section of the sidebar menu.
- Confirm that everything looks correct and works correctly.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 23 Jan 2017 11:35:13 +0000 (12:35 +0100)]
Bug 17958: Add tests for Koha::Notice::Template[s]
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
prove t/db_dependent/Koha/Notices.t
should return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Mon, 16 Jan 2017 12:25:31 +0000 (13:25 +0100)]
Bug 17962: TT syntax for notices - Prove that ACQ_NOTIF_ON_RECEIV is compatible
To make ACQ_NOTIF_ON_RECEIV TT compatible, we need to expose data from
the aqorders table. We already have a package for it in the Koha
namespace but it is based on Koha::Object[s].
The other path creates dummy Koha::Tmp::Order[s] packages to make it
usable. Of course we should use a valid Koha::Acquisition::Order[s]
based on Koha::Object, but it's outside the scope of this bug report.
This notice template is quite simple, and it's a good one to start.
From C4::Acq::NotifyOrderUsers, GetPreparedLetter is called with 4
elements: the library, the patron to notify, the biblio and the order
information.
Note that prior to this patch aqorders was filled from GetOrder, which
retrieved a lot of information from the acquisition table (aqbasket,
aqbookseller). The idea with the TT syntax is to access the data from
where it really exists. So if a user wants to display the basket name,
[% order.basket.basketname %] should be used instead.
Note that this will not work at the moment, the basket method is not
defined in the order package.
However the basic template should work as before.
The test added to TemplateToolkit proves that.
Test plan:
Use the default ACQ_NOTIF_ON_RECEIV to notify a patron that an order has
been received.
That generated template should be exactly the same as prior to this
patch.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 23 Jan 2017 10:40:48 +0000 (11:40 +0100)]
Bug 17950: Merge.t: Improve variable handling at top level
This patch does:
[1] Remove unused $dbh.
[2] Move all mocking statements to one sub.
[3] Promote a few lexicals to globals when used in the subtests.
Test plan:
Run t/db_dependent/Authorities/Merge.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 23 Jan 2017 09:44:57 +0000 (10:44 +0100)]
Bug 17950: Improve quick UNIMARC fix in Merge.t
Bug 17909 and 17913 added a quick fix for Merge.t on UNIMARC records.
This patch improves that fix with the sub compare_fields, a merge from
compare_field_count and compare_field_order.
Also it adds the option to test MARC21/UNIMARC by adding a command line
switch that triggers mocking the marcflavour preference.
The test on a cleared field 609 in strict mode has been broken up in two
tests: first a count without 609 and then counting 609s only.
Note: Could have mocked GetMarcBiblio too, but decided to go this way.
Test plan:
[1] Run perl t/db_dependent/Authorities/Merge.t
[2] (For UNIMARC users:) Run perl Merge.t -flavour MARC21
[3] (For others:) Run perl Merge.t -flavour UNIMARC
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Caitlin Goodger [Thu, 19 Jan 2017 23:31:16 +0000 (23:31 +0000)]
Bug 17948 Link to make a new list in masthead in OPAC does not take you straight to add form
Test Form
1: Go to OPAC and click on add new list.
2: It takes you to Your Lists and not straight to add a new list
3: Apply patch
4: Refresh and when you click on new list it should take you straight to
add a new list
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Aleisha Amohia [Tue, 14 Feb 2017 01:12:43 +0000 (01:12 +0000)]
Bug 14854: Add DataTables on upload results table
This patch adds datatables to the upload results table.
Tools -> Upload
To test:
1) Go to Tools -> Upload
2) Put any search term in search box, click Search
3) Confirm table shows as datatable and sorting works on all columns
EXCEPT Actions
Sponsored-by: Catalyst IT Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 18068: ES - Fix location and (home|holding)branch facets
This patch makes the 'Locations' facet work as expected (i.e. having the
same behaviour it has for Zebra: picking the 952$c in MARC21 and 995e
for UNIMARC).
It also adds the code to handle holding and home library settings for
facets and makes the facets show the library name instead of the branch
code.
The mappings are updated so the labels match what facets.inc expect to
work properly.
To test:
- On master, do a search that returns biblios with items having
homebranch set.
=> FAIL: Under the 'Locations' label on the facets you will notice
branchcodes are shown.
- Apply the patch
- Restart memcached and plack (just in case, it was tricky)
- Reset your mappings:
http://localhost:8081/cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
- Restart memcached and plack (again, not sure if needed)
- Make sure this mappings are set:
homebranch => HomeLibrary
holdingbranch => HoldingLibrary
(Note: it might not be set due to the place the yaml file is being picked)
- Reindex your records:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ perl misc/search_tools/rebuild_elastic_search.pl -d -v
- Repeat the initial search
=> SUCCESS: 'Location' contains the right stuff, 'Home libraries' and
'Holding libraries' too.
- Run
k$ prove t/db_dependent/Koha_SearchEngine_Elasticsearch_Search.t
=> SUCCESS: Tests pass!
- Sign off :-D
Note: play with the 'DisplayLibraryFacets' syspref options. Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 2 Feb 2017 00:09:38 +0000 (01:09 +0100)]
Bug 18045: Fix Reserves.t tests - caching issues
If the cache has to be cleaned when marc structure is updated.
Before this patch, if the age restriction was not mapped, Reserves.t
failed with:
Tag "" is not a valid tag. at t/db_dependent/Reserves.t line 523.
Test plan:
Just confirm that the tests still pass and that the changes make sense.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
It seems that only removing the key MarcSubfieldStructure- should be
enough, but it does not hurt either to remove those four keys.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Looks like it's caused by bug 13190.
Variable export_remove_fields is not sent to the template, let's
retrieve the syspref's value using the TT plugin.
Test plan:
Fill ExportRemoveFields with something (100a for instance)
Go on a checkout list page
At the bottom, the "do not export fields" input box should be pre-filled
with the content of the syspref
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Liz Rea [Tue, 31 Jan 2017 21:59:01 +0000 (21:59 +0000)]
Bug 18025 - Expired password recovery links cause sql crash
When a user gets an email, but doesn't act or visit it within two days,
attempting to create a new one causes a collision. We should just
delete the old one, assuming they still want to reset their
password.
To test:
create yourself a borrower with a userid and password.
Attempt a password recovery on the OPAC
update the entry in the database for that user to have an expired token
e.g. update borrower_password_recovery set valid_until = '2017-01-25
03:25:26' where borrowernumber = 12;
Attempt another password recovery operation - should error
apply the patch
Try it again - no error, new token is generated and additional email
with new link is sent.
Issue reproduced - is resolved by patch Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 19 Jan 2017 10:20:33 +0000 (11:20 +0100)]
Bug 17933: Do not instanciate a patron if not needed
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Thu, 19 Jan 2017 10:13:36 +0000 (11:13 +0100)]
Bug 17933: Add test and return unless defined dob
Without this patch get_age return actually 0 instead of
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17933 - Internal software error when searching patron without birth date
When patrons don't have date of birth (which is not required) patron
search results on moremember page produce internal server error since we
can't convert MySQL invalid date 0000-00-00 to datetime object and
call strfdate on it.
Additionally, since we assign dates to template variables and after
than assign whole $data hash to template, later assigment overrides
previous one, so we see birth date field even for patrons which don't
have one.
This patch fixes both of those problems.
Test:
1. edit patron and remove it's birth date
2. try to search for it, and verify server error
3. apply patch
4. repeat search for patron and verify that it works and doesn't
have enpty birth date field
Signed-off-by: Grace McKenzie <grace.mcky@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Josef Moravec [Wed, 15 Feb 2017 06:52:32 +0000 (06:52 +0000)]
Bug 18119: Fix comment in cataloguing.js
Test plan:
Go to cataloging, and try something which depends on javascript -
collapse/uncollapse fields, open authority search window, ...
-> without patch it is not working
-> with patch it is working correctly
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Oleg Vasylenko [Tue, 24 Jan 2017 15:58:39 +0000 (17:58 +0200)]
Bug 17780 - When choose an author in authority results new window shows a blank screen
Select2 (Bug 13501) introduced divs and inputs that broke some assumptions about the expected HTML structure.
This patch checks if input has name attribute, because some inputs in Select2 have not.
To test:
Try to add info from the authorities to field that has subfield with Select2 (subfield with authorised values on Koha 16.11+)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Kyle M Hall [Tue, 24 Jan 2017 16:15:35 +0000 (08:15 -0800)]
Bug 15503 - Populate the order prices
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15503 [QA Followup] - Use Koha::AuthorisedValues and fetch notforloan values.
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Thu, 3 Nov 2016 10:44:56 +0000 (10:44 +0000)]
Bug 15503 [QA Followup] - Set itype and ccode properly
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15503 [QA Followup] - Display "uneven number of fields" error only in relevant biblios
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15503 [Followup] - Add replacementprice and itemcallnumber
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Fri, 16 Sep 2016 13:05:41 +0000 (13:05 +0000)]
Bug 15503 [QA Followup] - Remove the use of GetBranchesLoop
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15503 - Fix adding multiple items in multiple biblios.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The goal of this development is to automatically generate items in Koha with
populated information based on a 9XX field and subfield, with the new syspref
MarcItemFieldsToOrder.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marc Véron [Fri, 10 Feb 2017 15:07:13 +0000 (16:07 +0100)]
Bug 18095: Batch item modification: Better message if no item is modified
If no item is modified, the result page of Batch item modification says:
"item(s) modified (with fields modified)."
The message should be: "No items modified"
To reproduce:
- Go to Tools -> Batch item modification
- Put a barcode in and click Continue
- Do not make any changes and/or deselect all item(s)
- Click "Save"
=> Result message reads: "item(s) modified (with fields modified)."
To test:
- Apply patch
- Repeat steps above
- Verify that message makes sense.
NOTE: Also tested positive case with actual field change.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mark Tompsett [Fri, 20 Jan 2017 17:34:56 +0000 (17:34 +0000)]
Bug 17935: Follow up for C4::Plugin...
TEST PLAN
---------
-- apply first patch
git grep "C4::Plugin"
-- still two references
perldoc Koha::Plugins::Base
perldoc Koha::Plugins::Handler
-- apply this patch
git grep "C4::Plugin"
-- no references
perldoc Koha::Plugins::Base
perldoc Koha::Plugins::Handler
-- should look fixed
Please enter the commit message for your changes. Lines starting
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Wed, 18 Jan 2017 15:56:16 +0000 (16:56 +0100)]
Bug 17935: Adjust some POD lines, fix a few typos
This patch does the following:
[1] Move some POD lines from Cache to Caches.
[2] Correct C4::Plugins to Koha::Plugins in POD line of Koha::Plugins
[3] POD Koha/AuthorisedValue.pm: lib_opac moved to opac_description
[4] The POD in Koha/Patron.pm uses head2 and head3 inconsistently.
Ran s/^=head2/=head3/ on those lines (7 substitutions on 7 lines)
[5] Correct a copied POD line from reports/issues_stats.pl in
reports/reserve_stats.pl.
[6] Correct a test description in t/db_dependent/Koha/Authorities.t.
You should never delete the library :)
[7] Correct typo shouild in a comment of rebuild_zebra.pl
Test plan:
[1] Read the patch. Does it make sense?
[2] Run perldoc Koha/Cache.pm and Koha/Caches.pm
[3] Run t/db_dependent/Koha/Authorities.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Chloe [Thu, 21 Jan 2016 03:20:58 +0000 (03:20 +0000)]
Bug 15584 - Staff client list errors are incorrectly styled
To Test-
1. In the Staff Client, go to Lists
(/cgi-bin/koha/virtualshelves/shelves.pl) and create a new list with
the same name as an existing one. --note that it has some red in it
like an error
2. apply patch
3. In the Staff Client, go to Lists
(/cgi-bin/koha/virtualshelves/shelves.pl) and create a new list with
the same name as an existing one. --note that now it should be just
yellow with black writing as an alert
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Fri, 3 Feb 2017 11:38:53 +0000 (11:38 +0000)]
Bug 18047 - JavaScript error on item search form unless LOC defined
If LOC is not present, the item search form will raise a JS error:
SyntaxError: expected expression, got '}'
This patch fixes it by handling this specific case.
Note that the "Status" column is still displayed.
Test plan:
Remove your LOC authorised values
Go on the item search form
=> You will not get the JS error and the "Shelving location" bloc is no longer
displayed. There is no need to display it if empty.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Tue, 24 Jan 2017 15:39:28 +0000 (16:39 +0100)]
Bug 17982: Fix the use of uniq in sub themelanguage
Doing uniq( \@themes ) is useless. It will just return to you the only
reference you gave it.
List::MoreUtils::uniq requires a list instead of an arrayref.
So it is a trivial fix that makes sub themelanguage return one theme instead
of three themes like [ 'prog', 'prog', 'prog' ].
Note that Template->new inserts one or two include paths to TT for each of
these three identical themes.
Test plan:
[1] Run t/db_dependent/Templates.t (should no longer fail)
[2] Run t/db_dependent/Auth.t (triggering themelanguage)
[3] Open a page on OPAC or intranet. (Did you restart Plack?)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
EDIT (Marcel): Amended test plan for additional unit test.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Thu, 2 Feb 2017 07:40:58 +0000 (08:40 +0100)]
Bug 17982: Expose wrong use of uniq
This test should fail without the patch fixing the uniq calls.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Thu, 9 Feb 2017 11:48:40 +0000 (11:48 +0000)]
Bug 18089 - All XSLT testing singleBranchMode = 0 fails to show even if install has only 1 branch
Due to the way it has been implemented, singleBranchMode is set to an
empty string rather than 0 if there is only one branch. This causes any
block that tests for singleBranchMOde to be 0 to never appear.
Test Plan:
1) Apply this patch set
2) prove t/XSLT.t
Signed-off-by: Jenny Schmidt <jschmidt@switchinc.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Thu, 9 Feb 2017 11:48:08 +0000 (11:48 +0000)]
Bug 18089 - Unit test
Signed-off-by: Jenny Schmidt <jschmidt@switchinc.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Zoe Schoeler [Wed, 18 Jan 2017 00:55:43 +0000 (00:55 +0000)]
Bug 17838 Availability limit broken until an item has been checked out.
TEST PLAN
1. Make sure you have no items checked out.
2. Run sudo koha-rebuild-zebra -f -v kohadev.
3. Go to search the catalog and search.
4. Check items availability and then click on limit to currently
available items.
5. This should return no results.
6. Apply patch and reload.
7. Results should show.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Attribute 14: " Specifies whether un-indexed fields should be ignored. A
zero value (default) throws a diagnostic when an un-indexed field is
specified. A non-zero value makes it return 0 hits."
From http://www.indexdata.com/zebra/doc/querymodel-zebra.html
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Mon, 30 Jan 2017 14:19:35 +0000 (15:19 +0100)]
Bug 18014: AddAuthority should respect AUTO_INCREMENT
Instead of using the MAX(authid)+1 logic, AddAuthority should just save
the record and get the new id. The authid column is an autoincrement.
This eliminates problems where a newly assigned authid also refers to a
previously deleted record. (And it will not cause problems when refining
the dontmerge functionality on report 9988.)
Note: ModAuthority also calls AddAuthority to update an existing record; in
that case we should not create a new record even if the record should not
be found any more (which should be exceptional).
This patch also simplifies handling of 001 in the authority record: in all
cases this field is updated now; no need to check its contents.
Test plan:
[1] Run t/db_dependent/AuthoritiesMarc.t
[2] Add a new authority record via the interface
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Tue, 31 Jan 2017 08:11:05 +0000 (09:11 +0100)]
Bug 18014: Add test to AuthoritiesMarc.t to expose problem in AddAuthority
Since AddAuthority uses max(id)+1 logic to produce the next authid,
authority id's will be reused when you delete the last record. This may
be a source of problems and will be addressed on the next patch.
This patch add a test to expose the problem.
Test plan:
[1] Run t/db_dependent/AuthoritiesMarc.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Tue, 31 Jan 2017 07:59:45 +0000 (08:59 +0100)]
Bug 18014: General update of AuthoritiesMarc.t
Modern::Perl, Koha::Database, etc.
Test plan:
Run t/db_dependent/AuthoritiesMarc.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Magnus Enger [Thu, 10 Nov 2016 14:32:44 +0000 (14:32 +0000)]
Bug 4126 - Exit bulkmarcimport if -a and -b given
Currently it is possible to spceify both --biblios and --authorities
as command line switches to bulkmarcimport.pl. This does not make sense
so we should exit early and explain that these switches are mutually
exclusive.
To test:
- Run one of these and check that there is no complaint about missing
options:
perl misc/migration_tools/bulkmarcimport.pl -a -b
sudo koha-shell -c "perl misc/migration_tools/bulkmarcimport.pl -a -b"
kohadev
- Observe that this displays the perldoc, but does not complain about
mutually exclusive switches.
- Apply the patch
- Rerun the command(s) from earlier.
- Verify that the script is now halted and a small explanation given.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mason James [Sat, 28 Jan 2017 11:47:20 +0000 (00:47 +1300)]
Bug 18009 - IssueSlip.t test fails if launched between 00:00 and 00:59
to test patch...
1/ set date between 00:00 and 00:59
$ sudo date -s 'Sun Jan 29 00:41:55 NZDT 2017'
2/ run prove, see fail
$ prove -v t/db_dependent/Members/IssueSlip.t
...
t/db_dependent/Members/IssueSlip.t (Wstat: 65280 Tests: 1 Failed: 0)
Result: FAIL
3/ apply patch
4/ run prove, see pass
$ prove -v t/db_dependent/Members/IssueSlip.t
...
All tests successful.
Result: PASS
NOTE: for code obscurity you could have also done a modulus 24. ;)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17788: (MARC21) Add $9 fields to Koha-Auth-Number:w index
Looking at the default framework's fields that are linked to authority
records, there's a divergence with the Zebra index definitions.
This yields to authority usage count be incorrect for users searching
for authority records.
MariaDB [koha_kohadev]> SELECT tagfield,tagsubfield,authtypecode FROM
marc_subfield_structure WHERE authtypecode IS NOT NULL AND
authtypecode<>'' AND frameworkcode='' GROUP BY
tagfield,tagsubfield,authtypecode ;
+----------+-------------+--------------+
| tagfield | tagsubfield | authtypecode |
+----------+-------------+--------------+
| 100 | a | PERSO_NAME |
| 110 | a | CORPO_NAME |
| 111 | a | MEETI_NAME |
| 130 | a | UNIF_TITLE |
| 440 | a | UNIF_TITLE |
| 600 | a | PERSO_NAME |
| 610 | a | CORPO_NAME |
| 611 | a | MEETI_NAME |
| 630 | a | UNIF_TITLE |
| 648 | a | CHRON_TERM |
| 650 | a | TOPIC_TERM |
| 651 | a | GEOGR_NAME |
| 654 | a | TOPIC_TERM |
| 655 | a | GENRE/FORM |
| 656 | a | TOPIC_TERM |
| 657 | a | TOPIC_TERM |
| 658 | a | TOPIC_TERM |
| 662 | a | GEOGR_NAME |
| 690 | a | TOPIC_TERM |
| 691 | a | GEOGR_NAME |
| 696 | a | PERSO_NAME |
| 697 | a | CORPO_NAME |
| 698 | a | MEETI_NAME |
| 699 | a | UNIF_TITLE |
| 700 | a | PERSO_NAME |
| 710 | a | CORPO_NAME |
| 711 | a | MEETI_NAME |
| 730 | a | UNIF_TITLE |
| 796 | a | PERSO_NAME |
| 797 | a | CORPO_NAME |
| 798 | a | MEETI_NAME |
| 799 | a | UNIF_TITLE |
| 800 | a | PERSO_NAME |
| 810 | a | CORPO_NAME |
| 811 | a | MEETI_NAME |
| 830 | a | UNIF_TITLE |
| 896 | a | PERSO_NAME |
| 897 | a | CORPO_NAME |
| 898 | a | MEETI_NAME |
| 899 | a | UNIF_TITLE |
+----------+-------------+--------------+
This patch adds the missing ones to the authority number index as it is
done for the rest of the fields.
To test:
- Verify that
etc/zebradb/marc_defs/marc21/biblios/biblio-koha-indexdefs.xml
contains intries pointing the $9 subfield of all the fields in the
'tagfield' column above, to the Koha-Auth-Number:w index.
- Sign off :-D
Signed-off-by: Hugo Agud <hagud@orex.es> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Thu, 27 Oct 2016 13:07:29 +0000 (15:07 +0200)]
Bug 17512: Improve handling dates in C4::Items
This is a follow-up on the internal server error on 0000-00-00 in the items
column onloan. This patch deals with preventing to have such dates at all
in the date fields of items.
It is accomplished by:
[1] Adding a (private) subroutine _mod_item_dates. It takes an item hash
and replaces date values if needed.
[2] AddItem and ModItem call _koha_new_item resp. koha_modify_item. In these
routines a call to the new _mod_item_dates is inserted.
[3] Although the routine is actually private, I have added some unit tests
to Items.t.
Test plan:
[1] Add a new item. Fill a correct date in dateaccessioned and an invalid
date in Price effective from (=replacementpricedate).
[2] Verify that dateaccessioned is saved correctly and replacementpricedate
is still null (does not contain 0000-00-00).
[3] Edit the item again. Fill some text in dateaccessioned and put a correct
date in replacementpricedate. Verify the results.
[4] Run t/db_dependent/Items.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Oleg Vasylenko [Wed, 25 Jan 2017 10:01:05 +0000 (12:01 +0200)]
Bug 17988 - Select2 prevents correct tag expand/minimize functionality
Overview:
Select2 (Bug 13501) introduced divs and inputs that broke some assumptions about the expected HTML structure.
Because of that, expanding fields to show all hidden subfields does not work properly.
Steps to Reproduce:
1. Open some book in the editor or create new (cataloguing/addbiblio.pl)
2. Try to minimize or expand fields, that have among subfields the following:
— Thesaurus driven subfield → subfield with Select2
— Hidden subfield.
Actual Results:
— some fields become hidden, some not, and vice versa
— in the console, you'll see «Uncaught TypeError: Cannot read property 'match' of null»
Expected Results:
— all subfields should minimize/maximize completely
Additional Information:
This happens because Select2 adds some divs, that do not have ID property.
The following patch adds check for the needed attribute existance.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Emma [Wed, 18 Jan 2017 21:37:23 +0000 (21:37 +0000)]
Bug 17134: Replace item types codes with category in facets (opac)
To test:
-Search in OPAC for two or more items
-Note that item types display category codes rather than names
-Make change to file and test in OPAC
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 22 Nov 2016 09:35:07 +0000 (09:35 +0000)]
Bug 16984: Do not clone the item block for standing orders
If AcqCreateItem is set to ordering and the basket is marked as
"standing orders", when ordering a JS error is raised:
additem.js:176 Uncaught TypeError: window[events[i]] is not a function
The item block should not be displayed in that case.
Test plan:
- Set AcqCreateItem to "ordering"
- Create a basket and tick the "Standing orders" checkbox
- Add an order to this basket
=> Without this patch you get the JS error
=> With this patch applied you will not get it
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 8 Feb 2017 16:49:41 +0000 (17:49 +0100)]
Bug 17940: (follow-up 14695) Fix - Mark holds as waiting when transfer is done
When an item from Library A is reserved and set to be picked up at
Library B, the hold buttons fail to confirm or cancel during check in at
Library B when the item is transferred from Library A.
Test plan:
* Create a hold for item at Library A to be picked up at Library B.
* Check in item at Library A to trigger the transfer.
=> item shows in transit
* Switch to Library B and check in item.
* Confirm the hold.
=> item shows waiting
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 8 Feb 2017 11:41:37 +0000 (12:41 +0100)]
Bug 18076: Replace holds_to_place_count with an input type=text
From http://www.template-toolkit.org/docs/manual/Directives.html#section_WHILE
"""
The Template Toolkit uses a failsafe counter to prevent runaway WHILE loops which
would otherwise never terminate. If the loop exceeds 1000 iterations then an undef
exception will be thrown, reporting the error:
WHILE loop terminated (> 1000 iterations)
The $Template::Directive::WHILE_MAX variable controls this behaviour and can be set
to a higher value if necessary.
"""
I do not think we want to increase this value, and I do not think we want to display a
dropdown list with 1000 entries.
This patch replaces the dropdown list with an input text.
Test plan:
- Set circulation conditions - holds per record = 999
- Search for record with items
- Go to the holds tab
- Search for a patron
- Verify that when you send your search, the 'internal server error' is not shown
and you see the input text.
You should be able to enter a value > than 999 and < 1
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Josef Moravec [Wed, 8 Feb 2017 08:49:46 +0000 (08:49 +0000)]
Bug 18079: Holds to pull cleanup
Changes made:
- remove obsolete comment in pendingreserves.pl
- use Modern::Perl in circ/pendingreserves.pl
- get rid of unusable param run_report - followup for bug 8454
- get rid of references to hold status - followup for bug 9320
- remove unused data from SQL and reservedata structure
Test plan:
1) Apply patch from bug 18073
2) Apply patch on this bug
3) Enable on shelf hold in administration -> circulation and fines rules
4) Create some holds on avalaible items
5) Confirm that circulation -> holds to pull page works as expected
6) Try to find any regression
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
projects / koha.git / log