Jonathan Druart [Thu, 24 Jul 2014 11:43:05 +0000 (13:43 +0200)]
Bug 12648: Link patrons to an order
This patch is the main patch.
This feature adds the ability to link patrons to an order.
On that way, they will be notified when the order is completely
received.
Test plan:
1/ Execute the updatedb entry and verify you have a new notification template in your table (tools/letter.pl).
code: ACQ_NOTIF_ON_RECEIV, module: acquisition
2/ You can edit it if you want
3/ Create a basket and create an order with 1 or more items
4/ Link 1+ patrons to this order
5/ Close the basket and receive the order
6/ When you have received all items for this order, all patrons attached
will be notified. Check the message_queue table to check if the letters
have correctly been added to the queue.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 24 Jul 2014 11:33:06 +0000 (13:33 +0200)]
Bug 12648: Refactoring to prepare user search for reuse
A previous enhancement allows to link basket with patrons.
Next patches will use the same way to link order with patrons.
In order to avoir c/p of code, this patch refactores this part of code.
Test plan:
1/ Verify there is no regression on adding/modifying users to a basket.
(acqui/basket.pl?basketno=XXX, "Managed by", "Add user").
2/ Note that you get a friendly message if the user is already present in the
list and when the user has correctly been added to the list.
3/ Note that the list uses the member search service (ie. DataTable +
serverside processing).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Wed, 18 Feb 2015 19:09:57 +0000 (20:09 +0100)]
Bug 11400 - Follow-up for nicer design
This patch tries to get the Bug out of "In discussion" by changing the design a little bit.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11400: Show "Log in as a different user" in the error message instead of the "Logout" button
Bug 11146 introduced a way to go back, and have a logout link for the
"Not enough permissions" message page. I belive the logout button is redundant. And
also "Log in as a different user" tells the user more about its options on the scenario.
Simple and disputable usability/string change.
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Tue, 3 Mar 2015 10:49:29 +0000 (11:49 +0100)]
Bug 13351 - Untranslatable javascript in members.tt
This patch streamlines the page title text for search results in Home > Patrons to make it translateable (and more readable).
To test:
- Apply patch
- Select Englsh language
- Apply filter wit several values or click on a letter for "Browse by last name"
- Verify that the title makes sense
- Translate to your language and select this language
- Verify that the text appears properly in your language
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
http://bugs.koha-community.org/show_bug.cgi?id=13352 Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
While in there I added tags to releases and developers that were missing.
To test:
* Log in to staff client
* visit about koha
* check to make sure timeline is right
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12631: Inventory: fix "wrong place" and "item not scanned"
"item not scanned": when calling GetItemsForInventory, datelastseen should
be used when "compare barcodes list to result" is checked.
Otherwise, when loading multiple barcodes files for the same inventory, many
items will be marked as "item not scanned" when loading the last barcode file
("compare barcodes list to result" checked) even though they were scanned.
"wrong place": when searching for wrongly placed items, we should only check
for the location (callnumbers, location and branch). To fix this, A new call
to GetItemsForInventory has been made with location filters only.
Otherwise, any item with a different itemtype for instance will be marked as
wrong place even if the location is correct.
Test plan:
"item not scanned" status:
1) Split a barcode file in two.
2) Load the first barcode file without checking "compare barcodes list to result".
3) Load the second barcode file with "compare barcodes list to result" checked.
4) Check in the csv report that you have a lot of scanned items with the "item
not scanned" status.
Then apply the patch, do the same, and check that the false "item not scanned"
statuses are gone.
"wrong place" status:
1) Load a barcode file with barcode matching an item that has a correct
location, but a different itemtype than what you're looking for.
2) Check in the results that this item will be marked as "change item status"
and "wrong place".
Then apply the patch, do the same, and check that the only status for this item is "change item status", which is correct.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Sun, 22 Feb 2015 10:50:21 +0000 (11:50 +0100)]
Bug 13750: Holds queue - Show branch name instead of branch code
When the holds queue report is limited to one library, it shows
<cound> items found for <branchcode>
With the patch applied, the branch name is shown instead of the code.
To test:
- Go to circulation > Holds queue
- Limit to one branch with holds waiting to be processed
- Confirm the string has changed to show the branch name
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Larry Baerveldt [Tue, 3 Mar 2015 13:49:57 +0000 (05:49 -0800)]
Bug 13784: koha-stop-zebra should also work for disabled instances
Currently koha-stop-zebra will not stop zebra for disabled instances. It should
work more like koha-stop-sip, which does work for disabled instances. Also,
koha-stop-zebra is called by '/etc/init.d/koha-common stop' which clearly
should also apply to disabled instances.
To Test:
1) Disable a koha instance.
2) Run koha-stop-zebra INSTANCE. You should get message
"Instance INSTANCE disabled. No action taken."
3) Apply patch, and copy patched file debian/scripts/koha-stop-zebra
to package site over /usr/sbin/koha-stop-zebra.
4) Disable koha instance.
5) Run koha-stop-zebra INSTANCE. It should now stop zebra.
http://bugs.koha-community.org/show_bug.cgi?id=13784 Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Wed, 4 Mar 2015 00:28:44 +0000 (19:28 -0500)]
Bug 13787 - Clean up noisy opac-advsearch warnings
While testing bug 10937, there were noisy warnings, which
distracted from testing the functionality of it.
Here is a snippet of the after the patch warnings:
Argument "" isn't numeric in numeric gt (>) at /home/mtompset/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt line 384.
Argument "" isn't numeric in numeric gt (>) at /home/mtompset/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt line 161.
Argument "" isn't numeric in numeric gt (>) at /home/mtompset/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt line 161.
Argument "" isn't numeric in numeric gt (>) at /home/mtompset/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt line 177.
Argument "" isn't numeric in numeric gt (>) at /home/mtompset/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt line 177.
Argument "" isn't numeric in numeric gt (>) at /home/mtompset/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt line 202.
Argument "" isn't numeric in numeric gt (>) at /home/mtompset/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt line 202.
Argument "" isn't numeric in numeric gt (>) at /home/mtompset/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt line 240.
Argument "" isn't numeric in numeric gt (>) at /home/mtompset/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt line 240.
Argument "" isn't numeric in numeric gt (>) at /home/mtompset/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt line 256.
Argument "" isn't numeric in numeric gt (>) at /home/mtompset/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt line 256.
Argument "" isn't numeric in numeric gt (>) at /home/mtompset/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt line 356.
Argument "" isn't numeric in numeric gt (>) at /home/mtompset/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt line 356.
Argument "" isn't numeric in numeric gt (>) at /home/mtompset/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt line 369.
Argument "" isn't numeric in numeric gt (>) at /home/mtompset/kohaclone/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-advsearch.tt line 369.
Tweaking the [% IF %] statements eliminated the warnings.
TEST PLAN
---------
1) Apply patch
2) Run koha qa test tools.
-- there will be noisy warnings in the before processing, but
there will be no such messages in the after processing.
3) git diff origin/master
-- there should be no visible typos.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
- Applied the patch from bug 10937
- Ran "koha-qa.pl -c 1" and observed the warnings described in the
commit message
- Applied the patch from this bug
- Ran "koha-qa.pl -c 1" again and saw no warnings
- Ran "koha-qa.pl -c 2" and saw no warnings
I have not tested the functionality of 10937 with this patch, just verified
that the changes look sensible.
This patch feels more like a followup for 10937, than a separate patch,
especially since 10937 is just "signed off" at this time. But as long as it
works...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Sat, 21 Feb 2015 19:40:31 +0000 (20:40 +0100)]
Bug 13744: Fix datatables paging on 'Holds to pull' report
The paging of the datatables on the 'holds to pull' report
page is broken without this patch.
To test:
- Make sure that some holds are placed on available items
in your installation
- Go to the circulation start page
- Open the 'holds to pull' report
- Verify that the patch fixes the paging on the result table
Also: Fixes "None" in the filter pull downs to be translatable. Signed-off-by: Nicole <nicole@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Search for a record with items that have been checked out
in the past
- From the detail page, open the 'checkout history' tab
- Check paging displays correctly with this patch and is
broken without
Signed-off-by: Nicole <nicole@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Sat, 21 Feb 2015 19:30:07 +0000 (20:30 +0100)]
Bug 13744: Fix datatables paging on 'order from subscription' page
The paging of the datatable on the 'order from subscription' page
is broken without this patch.
To test:
- Make sure you have a subscription, note the vendor
- Create a new basket for this vendor
- Add a new order line 'from a subscription'
- Check paging on the result table displays correctly
Signed-off-by: Nicole <nicole@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nicole [Thu, 5 Mar 2015 10:03:43 +0000 (02:03 -0800)]
Bug 13771: Update manage staged marc help for 3.18
This updates the manage staged marc files help.
To test:
* Visit Tools > Staged MARC record management
* Click help
* Confirm it's there and correct
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nicole [Wed, 4 Mar 2015 15:47:54 +0000 (07:47 -0800)]
Bug 13771: Add missing item search help file
This patch adds a help file for the staff item search.
To test:
* Click search
* click item search
* click help
* review the help file
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nicole [Tue, 3 Mar 2015 10:01:56 +0000 (02:01 -0800)]
Bug 13771: Add admin help files for 3.18
This patch adds a new help file for column settings and updates the
files for budgets, funds, libraries, patron categories, and circ rules.
To test:
* Visit the above listed admin pages
* Review help files
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nicole [Mon, 2 Mar 2015 15:48:12 +0000 (07:48 -0800)]
Bug 13771: Update Circ Help File
This updates the main circulation help file with new features in 3.18.
To test:
* visit circulation page
* click help
* review text
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
* Log in to staff cleint
* Click help on the mian page
* Review help file
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch creates a helpf ile for the batch record delete tool
and updates the help files for notices and marc export.
To test:
* Visit tools > batch record deletion
* confirm help is right
* Visit tools > Notices & Slips
* confirm help is right
* Visit tools > export marc
* cofirm the help is right
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13425 tried to fix XSS in OPAC, by using url filter in template toolkit
on whole generated url. This doesn't work and create double encoded strings
in facets because we are creating url variable by concatenating query_cgi
(which did pass through uri_escape_utf8 on perl side) and other
parameters which have to be escaped in template.
Also, code like
[% SET limit_cgi_f = limit_cgi | url %]
doesn't do anything (at least doesn't apply url filter) so it's not needed.
This patch also fixes encoding of hidden fields used in sort by form.
And lastly, it tries to make facet changes for opac and intranet as same as
possible to simplify future maintencence of this code.
Test scenario:
1. find results in your opac which contain accented characters
2. click on them and verify that results are missing
3. apply this patch
4. re-run search and click on facets link verifying that there are
now results
5. test sort by form and verify that results are ok
6. verify that facets are still safe from injection by constructing url like
/cgi-bin/koha/opac-search.pl?q=123&sort_by='"><script>prompt('Happy_Holidays')</script>&limit=123
and verifying that you DON'T see prompt window in your browser
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 28 Jan 2015 12:03:31 +0000 (13:03 +0100)]
Bug 13635: Unimarc - On editing a notice, the title should be displayed
The title method of MARC::Record does not deal with UNIMARC, it should
not be called if the marc flavour is UNIMARC.
Test plan:
On an unimarc installation, edit a notice, with this patch you should
see
"Editing TITLE (Record number BIBLIONUMBER)"
Without, the title was not displayed.
Same in the breadcrumbs.
Bug 13635: Remove another useless call
There is another call to the title method in additem.pl without any
check on the marc flavour.
But here the title variable sent to the template is redefined 3 lines
later.
So it can be simply removed.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested on UNIMARC install, editing a 'record' (not notice) does not show
title on breadcrumbs, status bar or page title.
With patch it does!
No koha-qa errors.
Signed-off-by: joel aloi <aloi54@live.fr> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 3 Sep 2014 13:08:39 +0000 (15:08 +0200)]
Bug 11395: Raise an alert if control field is used
If a control field is used with a copy or move action, the interface
should block the user in some cases:
- If a control field is used with a regular field
- The subfield should be empty
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 10 Oct 2014 18:20:54 +0000 (20:20 +0200)]
Bug 11395: exit should be done after displaying the output
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 8 Jul 2014 08:01:31 +0000 (10:01 +0200)]
Bug 11395: prevent processing no record
If no record is selected, the modification should not be launched.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 4 Jul 2014 08:40:21 +0000 (10:40 +0200)]
Bug 11395: Fix path for the checkboxes jQuery plugin
This patch fixes a bad resolution conflict (bug 12107).
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 16 Dec 2013 16:02:25 +0000 (17:02 +0100)]
Bug 11395: The modification template should be changed on the list view
This patch fixes the following issue:
If the user comes from a basket, the list view is displayed but there is
no way to select the modification template.
Now the template can be chosen on the list view. This way, the user is
able to change the modifications to apply and see the previewed records.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 12 Dec 2013 20:15:06 +0000 (21:15 +0100)]
Bug 11395: New service to preview a record.
The main patch adds the ability to preview a record. This is done using
an AJAX way. The preview record is processed on the server side.
Note: I don't think an authentification check is necessary here.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 12 Dec 2013 20:13:15 +0000 (21:13 +0100)]
Bug 11395: Add links to the new tool page
This patch adds links in the tool module to the new batch tool and in
the basket.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 12 Dec 2013 20:13:53 +0000 (21:13 +0100)]
Bug 11395: Add a batch record modification
This patch offers a new tool to modify records in a batch.
This feature adds:
- a new pl/tt files tools/batch_record_modification
- a new permission: tools > records_batchmod
Test plan for biblios:
0/ Create a new marc modification template with some actions.
1/ Generate a list of biblionumbers you want to modify.
There are two ways to generate a list of biblionumbers:
- using the basket: do a search, add some biblio to your basket, open
the basket and click on the "Action" button > "Modify"
- generating a list from a report
2/ On the "Batch record modification" tool verify:
- information is correct.
- the preview link show you the needed record.
3/ After clicking on the "Modify selected recors" button, verify
the records have been modified as you wanted.
Test plan for authority:
0/ Create a new marc modification template with some actions.
1/ Generate a list of authid using a report:
2/ On the "Batch record modification" tool verify:
- authorities are display with the summary.
- the preview link show you the needed record.
3/ After clicking on the "Modify selected recors" button, verify
the records have been modified as you wanted.
Catch of errors:
if an error occurs during the modification process, the tool
displays an error message.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Fridolin Somers [Wed, 21 Jan 2015 09:22:19 +0000 (10:22 +0100)]
Bug 13605 - _AUTHOR_ not replaced in relatives checkouts
In members/moremember.pl, in relatives checkouts tab, "by _AUTHOR_" appears before author.
This code sould be replaced in JS.
Test plan :
- Go to a borrower with relative's checkouts
=> without patch : you see "by _AUTHOR_" string before author name
=> with patch : you see "by" string before author name
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, fixes the problem.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Brandon [Tue, 13 Jan 2015 21:18:13 +0000 (21:18 +0000)]
Bug 13575 - Names do not appear in the Koha history Timeline.
This would be a good addition. The names to be added are:
Kahurangi Cormack, Alexander Cheeseman
Signed-off-by: Nicole <nicole@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Benjamin Rokseth [Tue, 22 Apr 2014 12:09:16 +0000 (14:09 +0200)]
Bug 12122: TransferSlip should accept both itemnumber and barcode
Added small patch to allow barcode as input in TransferSlip routine, mostly
to allow generating transfer slips where only barcode is present (aka.
javascript).
Test plan:
1) find book with <barcode> and <itemnumber>
2) generate transferslips with both:
transfer-slip.pl?transferitem=<itemnumber>3967925&branchcode=MPL&op=slip
transfer-slip.pl?barcode=<barcode>&branchcode=MPL&op=slip
and verify that the generated slips match.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Edit:
- Added tests in t/db_dependent/Circulation_transfers.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Passes tests and QA script.
Works with both itemnumber or barcode as described.
Tested printing transfer slips with the URL examples given
and in the UI.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 23 Feb 2015 11:32:33 +0000 (12:32 +0100)]
Bug 13731: Suggestions reason does not save on updating the status
On the suggestion list view, if you set a status, it won't be saved.
Test plan:
1/ Create a suggestion
2/ Go on the suggestion list view (suggestion/suggestion.pl)
3/ Select a suggestion and marked it as "rejected" (or the status you
want) and choose a reason
4/ Save
5/ Browse you suggestions DB table (using your favorite MySQL CLI) and
verify that the "reason" field is correctly filled.
Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, thx!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Sat, 21 Feb 2015 21:24:03 +0000 (22:24 +0100)]
Bug 13745: Fix serial collection page to always show branch name
The serial collection page shows 2 tables, one for the subscriptions
and a second for the issues. Both show the branch, but the first
showed the code while the second showed the name.
With this patch both tables show the name.
To test:
- Search for a subscription or create one
- Navigate to the serial collection page (navigation on left side)
- Check both tables on the page show the branch name with
the patch applied
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Sat, 21 Feb 2015 19:52:02 +0000 (20:52 +0100)]
Bug 13741: "No fund found" is not translatable
The string "No fund found" on the funds overview page is
not translatable.
To test:
- Create a new budget
- Check for the string on the funds page of the new budget
- Run an update on one of the po file sets
cd misc/translator
perl translate update <langcode>
- Verify that the string now appars in the po file for staff
- Verify the page still looks the same as before the patch
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Tue, 10 Feb 2015 17:32:08 +0000 (18:32 +0100)]
Bug 13676 - OpacSuppression description says 'items' but means 'records'
This patch changes the wording for the OpacSuppression preference description.
Without patch:
... items marked as suppressed from OPAC search results. Note that you must have the <code>Suppress</code> index set up in Zebra and at least one suppressed item, or your searches will be broken. ...
With patch:
... items marked as suppressed from OPAC search results. Note that you must have the <code>Suppress</code> index set up in Zebra and at least one suppressed biblio record, or your searches will be broken. ...
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mirko Tietgen [Wed, 25 Feb 2015 14:53:57 +0000 (15:53 +0100)]
Bug 13759 - git-build-snapshot misses YUI and dies of sorrow during build
Due to a line in debian/rules, git-build-snapshot tries to delete a YUI-related
path that does not exist anymore (bug 13612 I guess). Build process ends with an error.
This patch deletes the line.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
An incorrect conditional makes the indexer daemon fail to load.
To test:
- Enable the indexer daemon on packages [1]
- Restart koha-common:
$ service koha-common restart
- Run
$ ps waux | grep koha-indexer
=> FAIL: there's no reference to the rebuild_zebra.pl script
(line should look like *rebuild_zebra.pl -daemon*)
Run ps -ef | grep rebuild_zebra.pl too to make sure.
- Apply the patch, repeat the steps
=> SUCCESS: the rebuild_zebra.pl script is ran
- Sign off :-D
Thanks
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Tue, 17 Feb 2015 11:23:35 +0000 (06:23 -0500)]
Bug 13473 - Plugins fail
When trying to execute or configure the plugin on 3.18 I got:
Template process failed: file error - doc-head-open.inc: not found at
/usr/share/koha/lib/C4/Templates.pm line 129.
Test Plan:
1) Install the Kitchen Sink plugin
2) Go to the configuration page of the plugin
3) Note the template processing error
4) Apply this patch
5) Refresh the page
6) Note the page now loads
Signed-off-by: Nick <nick@quecheelibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Benjamin Rokseth [Thu, 22 Jan 2015 11:21:47 +0000 (12:21 +0100)]
Bug 13523 - AddBiblio fails on mysql with STRICT_TRANS_TABLES
This patch removes the NOT NULL restriction on biblioitems.marcxml and
deletedbiblioitems.marcxml due to STRICT_TRANS_TABLES default in
Mysql 5.6.22 and onwards.
Test:
1. check mysql global settings:
mysql > SELECT @@GLOBAL.sql_mode;
verify that STRICT_TRANS_TABLES is not set
2. set STRICT_TRANS_TABLES (or upgrade mysql to > 5.6.21)
mysql > SET @@GLOBAL.sql_mode = 'STRICT_TRANS_TABLES';
3. try to add biblio in Cataloguing module
verify that it fails with a "software error"
4. apply patch
5. repeat 3 and verify that there is no "software error" any more
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I confirm with the problem with mariadb and STRICT_TRANS_TABLES enabled.
On adding a biblio (C4::Biblio::AddBiblio), biblioitems is populate in
_koha_add_biblioitem but marxcml is not generated yet. It's in
ModBiblioMarc, few lines later.
The NOT NULL condition is not valid here.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Viktor Sarge [Wed, 18 Feb 2015 21:02:09 +0000 (21:02 +0000)]
Bug 13729 - Give news in Opac a unique anchor
This patch introduces the use of the idnew-value from the opac_news table as a base for a unique anchor on each newsitem in Opac.
The anchor can be used for linking to specific newsitems and also for improving bug 7843 (RSS stream for news) with a unique link to each item in the RSS stream.
Test plan:
* Make shure you have a few news in the opac. Best is if it's enough to hide a few beneath the bottom of the window.
* Install the patch.
* Verify that you can access newitems with links like mykoha/cgi-bin/koha/opac-main.pl#newsitem4
* Experiment with removing newsitems and verify that that the newsitem-id stay unique to each newsitem.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as advertised. Nice enhancement!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Thu, 22 Jan 2015 16:28:35 +0000 (11:28 -0500)]
Bug 13612 - Remove old YUI javacript libraries from opac-tmpl
YUI files were left behind in opac-tmpl/lib/yui after the removal of the
prog theme. These files are unused and can be safely removed.
To test, apply the patch and search for references to any of the YUI
files. You should find none in the OPAC templates.
No references found. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Tue, 10 Feb 2015 14:57:01 +0000 (15:57 +0100)]
Bug 13689 - Remove opac-old.css and sco-old.css
The following files are obsolete and should be removed:
koha-tmpl/opac-tmpl/bootstrap/css/opac-old.css
koha-tmpl/opac-tmpl/bootstrap/css/sco-old.css
To test: Apply patch. Search for the files; they should no longer exist.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Fri, 20 Feb 2015 14:54:35 +0000 (09:54 -0500)]
Bug 13645 [QA Followup] - Add DBIx::Connector to the list of dependancies
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nice catch Kyle, I changed it to require Ubuntu 12.04's
Jonathan Druart [Fri, 30 Jan 2015 16:10:54 +0000 (17:10 +0100)]
Bug 13645: Cache the DBIx connection
We don't want to recreate a new connection to the DB every time we want
a new schema.
This patch creates a $database package level variable on the same way
it's done in C4::Context for $dbh.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sip::Configuration calls new on Account, Institution and Service
classes but does not store or subsequently use the returned objects
( which immediately go out of scope ). Their existence just obscures
the code and misleads the reader. Remobe them
Removed redundant commented out code from Configyration module which
was not serving any useful purpose
Ran Configuration.pm through perltidy to make layout more
consistent
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Zeno Tajoli [Sun, 15 Feb 2015 16:40:06 +0000 (17:40 +0100)]
Bug 12948: Use word indexing for language (MARC21)
This patch is for MARC21. To test:
1)Setup a site with
MARC21
2)Insert 2 record, one lang A in 041 and 008 pos
35-37 an other with lang A in 041 and lang B in 008 pos
35-37
3)Index them
4)Search in advanced search with filter
'languare' for lan A. You will see 2 records
5)Search in
advanced search with filter 'languare' for lan B. You will
see 0 records
6)Apply the patch
7)Full reindex
8)Search in advanced search
with filter 'languare' for lan B. You will see 1 records
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
I have *not* actually tested this, but the changes are identical to the ones
done for NORMARC, which I have tested, so I think it is safe to sign off. If
anyone disagrees, please reset the bug to "Needs signoff".
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Zeno Tajoli [Sun, 15 Feb 2015 16:54:48 +0000 (17:54 +0100)]
Bug 12948: Use word indexing for language (NORMARC)
This patch is for Normarc
Same test plan as patch for MARC21, except you need a setup with Normarc.
http://bugs.koha-community.org/show_bug.cgi?id=12948 Signed-off-by: Magnus Enger <magnus@enger.priv.no>
- Added a record with "bul" in 008pos35-37
- Verified that this did not turn up in an advanced search with language =
Bulgarian
- Applied the patch
- I was testing on a gitified install, so I had to copy the patched index file
to the right location with this command:
- Did a full reindex
- Verified that the record *did* turn up in an advanced search with language =
Bulgarian
- Signing off! Thanks Zeno!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 10 Feb 2015 10:34:10 +0000 (11:34 +0100)]
Bug 13690: use Koha::Schema only when it's needed
This patch makes Koha::Database lazy-load the whole Koha::Schema libraries.
It doesn't seem to have negative effects, and makes scripts not using
DBIx::Class notably faster [1].
Regards
[1] If you read the DBIx::Class::Schema docs, it explains that it it uses
Module::Find to load all schema files...
http://search.cpan.org/~ribasushi/DBIx-Class-0.082810/lib/DBIx/Class/Schema.pm#load_namespaces
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Happy to sign this one. The only extra comment would be that DBIx::Class
performance issues remain after this patch, but is being handled in a
different bug.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Katrin Fischer [Sun, 18 Jan 2015 19:04:15 +0000 (20:04 +0100)]
Bug 13593: 'stock number' should be 'inventory number'
To make Koha easier to use, we should use terms consistently.
This patch fixes some occurrences of 'stock number' to be
'inventory number' as this is also the term used in the frameworks.
Item search, accessible via the link from staff's advanced search
1) Do a search for items, but choose CSV as output
2) Verify that the header row says 'inventory number'
Acquisition
3) Set AcqCreateItem to 'order'
4) Create a new order, check the labels on the item table in the order
5) Receive the order, check the labels on the item table on receive
6) Set AcqCreateItem to 'receive'
7) Check the item table on receiving an order
Followed test plan (including item search with JavaScipt disabled). Headers / labels display as expected.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Tue, 2 Sep 2014 09:14:03 +0000 (09:14 +0000)]
Bug 12858: Add error handling to Syndetics Index
* Syndetics routines include a statement to check that the returned
content from Syndetics is xml. The get_syndetics_index routine was
missing this check and so when a 'not found' html page was returned
the opac-detail page would take a long time to load whilst xml::simple
attempted to parse the large html document.
Test Plan
1. Enable Syndetics indexes on opac.
2. Head over to an opac-detail page on the opac.
3. Remove the ISBN from the same item in the staff client.
4. Reload the opac-detail page for the item noticeing a much slower
page load.
5. Apply the patch
6. Reload the opac-detail page for the item and note that it now laods
in a reasonable timescale again.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Mon, 19 Jan 2015 13:48:42 +0000 (13:48 +0000)]
BUG 13596: Prevent utf8mb4 -> utf8 convertion
utf8mb4 is a superset of utf8 and thus is compatible. We should not
force an entire db change upon people who have proactively set utf8mb4
encoding before now.
This patch also removed the deprecated use of ->tables stanza in favour
of the table_info stanza.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 16 Sep 2014 11:15:57 +0000 (13:15 +0200)]
Bug 12669: Centralize the timezone handle into Koha::DateUtils
This patch adds unit tests for the previous changes and centralize the
timezone handle into the Koha::DateUtils module.
Like that the behavior will affect all date manipulations using this
module (should be all dates in Koha).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Rolando Isidoro [Fri, 1 Aug 2014 08:42:30 +0000 (09:42 +0100)]
Bug 12669: Use floating timezone when handling dates without hours, minutes and seconds.
Test plan:
1. Create a new serial record or pick an existing one;
2. Add a "New subscription" and set the "First issue publication date"
and "Frequency" values so that the "Planned date" for a given issue
hits a day where a transition to Daylight Saving Time (DST) occurs
ex:. 1979-04-01 in Europe/Lisbon (http://www.timeanddate.com/time/change/portugal/lisbon?year=1979)
... use this website page as a source http://www.timeanddate.com/time/dst/2014.html
to find a suitable transition to DST in your timezone in the current year.
3. From the "Subscription detail" page in Koha for the given record click
the "Serial collection" link on the left side context menu.
Expected result:
Prior to applying the patch the error described in this bug report should occur.
After the patch is applied the "Serial collection" page should load correctly.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Sat, 7 Feb 2015 04:04:40 +0000 (17:04 +1300)]
Bug 13679 : Bug in listing overdues
To test
1/ Create some overdues and some issues due in the future
2/ Run the overdues script
3/ Notice item due in the future is in the list
4/ Apply patch
5/ Run script again
6/ Notice in the future not in the list
Signed-off-by: Nick <Nick@quechelibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13728: koha-translate -l -a shows po files instead of language codes
This patch corrects the call to 'basename' inside the script so it correctly
shows the language code when asked to list the available languages.
To test:
- On a packages install, run:
$ koha-translate --list --available
=> FAIL: It shows:
am-Ethi-opac-bootstrap.po
ar-Arab-opac-bootstrap.po
az-AZ-opac-bootstrap.po
be-BY-opac-bootstrap.po
ben-opac-bootstrap.po
...
- Apply the patch
- Copy the patched debian/scripts/koha-translate script to your packages setup.
- Run:
$ koha-translate --list --available
=> SUCCESS: It shows:
am-Ethi
ar-Arab
az-AZ
be-BY
ben
...
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 25 Sep 2014 14:39:11 +0000 (16:39 +0200)]
Bug 12970: Cancelled orders
Previous patch does modify the code for cancelled orders.
Test plan:
Cancel 1+ orders and verify the prices are correct (i.e. the same as
the non-cancelled orders) and that the prices are formated.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 25 Sep 2014 14:32:01 +0000 (16:32 +0200)]
Bug 12970: Format totals
The total values should be formated too.
Test plan:
1/ Go on the basket page
2/ Using the CurrencyFormat, verify the totals are correctly formated.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 19 Sep 2014 15:09:34 +0000 (17:09 +0200)]
Bug 12970: Use the centralize VAT and prices calculation - basket.pl
Bug 12969 introduces a subroutine to centralize VAT and prices
calculation.
It should be use in the acqui/basket.pl script.
Test plan:
0/ Don't apply the patch
1/ Create 4 suppliers with the different configurations
2/ Create a basket and create several orders
3/ Go on the basket page
4/ Apply the patch
5/ Verify you don't see any difference before and after applying the
patch
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Frédéric Demians [Mon, 12 Jan 2015 11:18:19 +0000 (12:18 +0100)]
Bug 13568 OAI Server doesn't handle properly resumption token
When responding to ListRecords and ListIdentifiers verbs, OAI server doesn't
return proper resumption token. At the end of a result set, OAI server
generates a resumption token even if there isn't anymore records. Consequently,
OAI harverster will send a new request, based on this invalid resumption,
token. OAI Server responds with an empty resultset, which is considered as an
invalid response by most of the harvesters.
TO TEST:
- Find in your DB, a day where a few biblio records have been created. The
number of created biblios must inferior to OAI-PMH:MaxCount.
- Let say this day is 2014-01-09. Send an OAI-PMH request to Koha OAI Server:
This is wrong. No resumptiion token should be sent since there isn't anymore
records to harvest.
- Apply the patch.
- Resend the OAI-PMH request. There is no resumption token at the end of the
result.
- You could test also with ListIdenfiers verb in place of ListRecord.
Signed-off-by: Christophe Brocquet <christophe.brocquet@obspm.fr> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Magnus Enger [Mon, 16 Feb 2015 09:50:17 +0000 (10:50 +0100)]
Bug 13712 - Missing newline in DB update 3.19.00.010
To test:
- Make sure your database is pre 3.19.00.010 (for example by loading in
an older backup)
- Run through the web-based database update (web installer, step 3)
- Verify that updates 3.19.00.010 and 3.19.00.011 are squashed
together on one line
- Apply the patch
- Reset the database and run the web-based database upgrade again
- Verify that the two uupdates are noe displayed on separate lines
(as separate bullet points)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 22 Sep 2014 15:10:10 +0000 (17:10 +0200)]
Bug 12976: Use the centralize VAT and prices calculation - invoice.pl
Bug 12969 introduces a subroutine to centralize VAT and prices
calculation.
It should be use in the acqui/invoice.pl script.
Test plan:
0/ Don't apply the patch
1/ Create 4 suppliers with the different configurations
2/ Create a basket and create several orders
3/ Receive the items and create an invoice
4/ Go on the invoice page acqui/invoice.pl?invoiceid=XXX
5/ Verify you don't see any difference before and after applying the
patch on the invoice details table.
Note: The only different you should see is the price formating for
"Total tax exc.". Before this patch "432.10" was displayed "432.1".
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 9 Dec 2014 18:00:02 +0000 (13:00 -0500)]
Bug 7741 [Follow-up] Clear search terms in Z3950 search page
This patch makes a follow-up change and takes as its basis a dependency
on Bug 13218 - usability enhancement for z39.50 search. If we have a
one-column search form it's possible to put the "Clear search form" link
at the bottom of the form rather than in the header, logically
associating it with the grouping of form fields which will be affected.
Doing so also allows us to eliminate all the custom styling which was an
issue for QA.
Other changes made by this patch: Fixing the indentation
error, correcting the case of the link text ("Clear search form" instead
of "Clear Search Form"), and adding "preventDefault()" to the click
handler so that clicking the link doesn't scroll the user back to the
top of the page.
To test, apply the previous patch and this one on top of Bug 13218.
Repeat the test plan.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Thomas Misilo [Wed, 3 Dec 2014 01:15:07 +0000 (20:15 -0500)]
Bug 7741: Added Clearing Capability to the Z39.50 Search fields
Tested in:
/koha/cataloguing/z3950_auth_search.pl
(Home:Authorities:New from Z39.50)
/koha/cataloguing/z3950_search.pl
(Home:Cataloging:New from Z39.50/SRU)
/koha/acqui/z3950_search.pl
(Home:Acquisitions:[Bookshop]:[Basket]:Order from external source)
All three forms can now be cleared. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 5 Feb 2015 17:19:38 +0000 (12:19 -0500)]
Bug 13672 - OPAC locks up browser when browsing items from series link with NoveList and OpacHighlightedWords
It appears that an empty string is sneaking into the list of words
to highlight and that is causing the browser to freak out.
Test Plan:
1) Enable NoveList
2) Enable OpacHighlightedItems
3) Search a title with a series (i.e. The Hunger Games)
4) Click into the record
5) Click on the series to search it
6) Click on a title in the search results
7) If Firefox doesn't crash, it gives the unresponsive script message
8) Apply this patch
9) Repeat steps 3-6
10) Browser doesn't freak our
Signed-off-by: Jason Robb <jrobb@sekls.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
could not confirm the problem, but small change and
highlighting terms on result list and couldn't find any
regressions in highlighting.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Julian Maurice [Fri, 13 Feb 2015 12:30:56 +0000 (13:30 +0100)]
Bug 13700: Fix item search templates for translation
Since translator rebuild HTML tags with double quotes for attributes
values, use double quotes in english template too and escape them with
backslash.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
It works well!!
Test:
1) Intall translation (de-DE, es-ES)
2) to Go to item search, in english, do a search that gives results
3) Switch language, repeat search, result's table does not render
4) Apply patch
5) Install translation again
6) Repeat 3, now results are displayed
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Tue, 20 Jan 2015 15:11:24 +0000 (10:11 -0500)]
Bug 13603 - autoBarcode setting hbyymmincr not taking month into account when looking up next increment
The hbyymmincr autoBarcode builder looks up all barcodes that begin with
any number of letters ( the branchcode ) and a two-digit year directly
afterward ( e.g. MPL15 ), then grabs the last four digits as the
increment counter. The problem is, this does not take months into
account, so unlike the description that says the system is limited to
10,000 items a month, it is limited to 10,000 items per *year*.
This situation can easily be corrected my adding the month into the
lookup ( e.g. MPL1501 ).
Test Plan:
1) Enable autoBarcode, set to hbyymmincr
2) Catalog an item, let the barcode.pl plugin generate
the next barcode.
3) Catalog an item with the barcode MPL15009999
4) Catalog another item, use the barcode.pl plugin to
generate the next barcode.
5) Note the barcode is generated ends with '0001' instead of the
correct increment
6) Apply this patch
7) Repeat step 4
8) Note the barcode now ends with the correct increment
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jeanne Heicher <nppublib@pa.net> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Problem confirmed - the continuing number bit was not reset
to start counting from 1 again on the beginning of a new month.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 9 Jan 2015 15:10:11 +0000 (16:10 +0100)]
Bug 13417: Remove warnings
Without this patch
perl -wc C4/VirtualShelves.pm
failed:
Constant subroutine C4::VirtualShelves::SHELVES_MASTHEAD_MAX redefined
at /usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHELVES_COMBO_MAX redefined at
/usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHELVES_MGRPAGE_MAX redefined at
/usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHELVES_POPUP_MAX redefined at
/usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHARE_INVITATION_EXPIRY_DAYS
redefined at /usr/share/perl/5.20/constant.pm line 156.
Subroutine GetShelves redefined at C4/VirtualShelves.pm line 103.
Subroutine GetAllShelves redefined at C4/VirtualShelves.pm line 159.
Subroutine GetSomeShelfNames redefined at C4/VirtualShelves.pm line 189.
Subroutine GetShelf redefined at C4/VirtualShelves.pm line 230.
Subroutine GetShelfContents redefined at C4/VirtualShelves.pm line 262.
Subroutine AddShelf redefined at C4/VirtualShelves.pm line 315.
Subroutine AddToShelf redefined at C4/VirtualShelves.pm line 353.
Subroutine ModShelf redefined at C4/VirtualShelves.pm line 394.
Subroutine ShelfPossibleAction redefined at C4/VirtualShelves.pm line
454.
Subroutine DelFromShelf redefined at C4/VirtualShelves.pm line 545.
Subroutine DelShelf redefined at C4/VirtualShelves.pm line 589.
Subroutine GetBibliosShelves redefined at C4/VirtualShelves.pm line 603.
Subroutine ShelvesMax redefined at C4/VirtualShelves.pm line 628.
Subroutine HandleDelBorrower redefined at C4/VirtualShelves.pm line 648.
Subroutine AddShare redefined at C4/VirtualShelves.pm line 683.
Subroutine AcceptShare redefined at C4/VirtualShelves.pm line 703.
Subroutine IsSharedList redefined at C4/VirtualShelves.pm line 731.
Subroutine RemoveShare redefined at C4/VirtualShelves.pm line 750.
Subroutine _shelf_count redefined at C4/VirtualShelves.pm line 764.
Subroutine _CheckShelfName redefined at C4/VirtualShelves.pm line 788.
C4/VirtualShelves.pm syntax OK
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 17 Dec 2014 15:27:11 +0000 (16:27 +0100)]
Bug 13417: Limit the permission to delete
It's preferable to limit the permission to delete shelves.
Apply both patches before testing, then follow this test plan
Currently a public list can only be deleted by its owner.
This means lists can exist infinitely.
This will introduce a new permission for list. With this permission, a
staff member will be allow to delete any public lists.
Test plan:
1/ Add the manage_shelves permission to a patron.
2/ Login with this patron
3/ Go on the public list view
4/ You should be able to delete all public lists
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 5 Dec 2014 11:30:08 +0000 (12:30 +0100)]
Bug 13417: Allow staff members to manage public lists
Currently a public list can only be deleted by its owner.
This means lists can exist infinitely.
This will introduce a new permission for list. With this permission, a
staff member will be allow to delete any public lists.
Test plan:
1/ Add the manage_shelves permission to a patron.
2/ Login with this patron
3/ Go on the public list view
4/ You should be able to edit all public lists
Followed test plan. Works as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 12 Nov 2014 19:42:37 +0000 (14:42 -0500)]
Bug 13142 - Change "mobile phone" label back to "other phone"
Labeling a phone number field "mobile phone" eliminates the usefulness
of having the labels "primary" and "secondary." Generic labels let the
user populate the fields according to their importance rather than their
type.
To test I recommend editing a patron record so that the values in the
patron record contain a label matching the table column:
View this patron's information in the various affected templates and
verify that the labels correctly match the data:
- OPAC "your personal details" (opac-memberentry.pl)
- Submit changes to primary, secondary, and other phone via the OPAC.
In the staff client, view the confirmation for those changes.
- Patron details in the staff client (moremember.pl)
- Patron entry/edit in the staff client (memberentrygen.pl)
- Patron duplicate confirmation in the staff client
(you can navigate directly to
/members/moremember.pl?borrowernumber=XXXX&print=brief)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds POD to the new /svc/barcode service, and also implements some
error handling.
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 4 Dec 2014 12:48:35 +0000 (07:48 -0500)]
Bug 13545 - Add barcode image generator service
If we add a script to Koha that can be passed a barcode, we will be able
to easily embed item and patron barcodes into html printable slips and
notices. This can be very helpful for librarians, as it means scanning
an image instead of typing in the barcode manually.
This patch adds a barcode image generator that can be passed a barcode
and an optional type ( defaults to Code39, all GD::Barcode types should
work ). This image can be embedded in html slips and notices.
( e.g. <img src="/cgi-bin/koha/svc/barcode?barcode=<<items.barcode>>"></img> )
Test Plan:
1) Apply this patch
2) Browse to /cgi-bin/koha/svc/barcode?barcode=123456789 on your server
3) Note the barcode image
Signed-off-by: Brandon <brandon_h27@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 3 Nov 2014 14:31:27 +0000 (09:31 -0500)]
Bug 13189 - Patron card creator patron search browse by last name broken by extended attributes
The browse by last name letters on the patron search for the patron card
creator doesn't work quite right. If extended patron attributes are
disabled, it works fine, but if they are enabled, they are searched even
when using the browse last name. Thus, if a searchable attribute has a
"D" in it, and one clicks the "D" link for the last name browser, that
patron will show even if he or she has no "D" in his or her hame!
Test Plan:
1) Enable extended patron attributes
2) Add a new searchable patron attribute
3) Create a new patron with the last name "Ace"
4) Add the value "D" to the attribute for this patron
5) Browse to the patron card maker, start a new patron batch
6) Click "Add item(s)" to bring up the patron search
7) Click the letter "D" in the patron search box
8) Note that "Ace" shows in the results list
9) Apply this patch
10) Repeat step 7
11) Note that "Ace" no longer shows in the results list
12) Perform a regular search by putting the letter "D" in the "Name:"
field, and hit the "Search" button
13) Note this time the results *do* have Ace in them
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Well described for a tricky bug. Reproducible. Fixed with this patch.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
This works as described, no problems or regressions found.
Jonathan Druart [Wed, 26 Nov 2014 14:14:59 +0000 (15:14 +0100)]
Bug 13343: Embed items when send a basket/shelf
When a basket/shelf is downloaded, items are embedded, but not when
sending it by email.
We would expect to get the same file.
Test plan:
On Opac and intranet:
1/ Add records with items to your basket and send it by email.
Verify the file contains items.
2/ Add records with items to a list and send it by email.
Verify the file contains items.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
projects / koha.git / log