Nick Clemens [Tue, 1 May 2018 13:47:18 +0000 (13:47 +0000)]
Bug 20687: Check all share keys for a given list
This patch gets all the shares for a list and iterates through to find
the correct one when accepting from a link
To test:
1 - Create a private list in the opac
2 - Invite 2 patrons to the list
3 - Try to accept from the patron you first shared to
4 - You will get a failure message about expiration of the link
5 - Apply patch
6 - Now try to accept the first share
7 - It works! Success!
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 20284: ILLModuleCopyrightClearance text breaks
This patch fixes the display of the copyright notice text that is defined
in ILLModuleCopyrightClearance preference when placing ILL requests from
the OPAC. Handling of the copyrightclearance stage was missing,
this has been added.
To test:
1) Ensure you have at least one ILL backend available:
https://wiki.koha-community.org/wiki/ILL_backends
2) Ensure you have the "ILLModule" preference enabled
3) Add some text to the "ILLModuleCopyrightClearance" preference
4) Navigate to a search results page in the catalog
5) Click the "Make an Interlibrary Loan request" link at the bottom
6) Choose "Create a new request", then select a backend
7) Observe the text you added earlier is displayed with buttons for
agreeing or disagreeing (prior to this patch, this screen displayed
an error)
8) Observe that clicking "Yes" takes you to the form for adding request
details
9) Observe that clicking "No" takes you back to the "Interlibrary loan
requests" page
Signed-off-by: Barry Cannon <bc@interleaf.ie> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Thu, 26 Apr 2018 04:31:32 +0000 (04:31 +0000)]
Bug 20663: Add some POD, so koha test tools don't complain
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Thu, 26 Apr 2018 04:17:51 +0000 (04:17 +0000)]
Bug 20663: Remove dead code related to compound reports
TEST PLAN
---------
git grep "Create Compound Report"
-- only one file
git grep compound | grep 1
-- this is the only setting of the compound tt variable
less koha-tmpl/intranet-tmpl/prog/en/modules/reports/guided_reports_start.tt
-- There is an TT IF statement for compound.
-- In that statement it would trigger 'Save Compound'
git grep save_compound
-- only the template and the guided report perl
git grep create_compound
-- only triggered by the save code in the guided report perl
-- in the export for the C4/Reports/Guided.pm
git grep run_compound
-- left over in export
apply the patch
look around and see the pieces are cleaned up.
run koha qa test tools
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Katrin Fischer [Sun, 22 Apr 2018 22:00:17 +0000 (22:00 +0000)]
Bug 19171: Attempt to make "no holds possible" messages less confusing
At the moment, when no holds are possible, the OPAC reads something
like:
Sorry, none of these items can be placed on hold.
No items available.
This is confusing to the patrons, because the records have items,
but they are not showing. The record also may have available items,
they are just not permitted to place holds on them.
Changes:
- Only display the first message, when somoene tried unsuccessfully
to place holds on multiple records.
- Change first message to: Sorry, none of these titles can be placed on hold.
- Change the second message to read:
No items available to be placed on hold.
- Remove <strong> around Sorry for better translatability.
To test:
- Try to place a hold on single record, where no hold is possible.
- Try to place a hold on a single record, where a hold is possible.
- Try to place holds on multiple records where no hold is possible.
- Try to place holds on multiple records where at least one hold
is possible.
Verify the screen messages make sense in all cases.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Fixed stray </strong> during signoff.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
For consistency with staff, I renamed multi_holds to multi_hold.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Thu, 3 May 2018 17:30:00 +0000 (14:30 -0300)]
Bug 11317: Add id and class attributes to body
This fixes xt/tt_valid.t
# Failed test '<body> tag with id and class attributes'
# at xt/tt_valid.t line 91
# Files list:
# intranet-tmpl/prog/en/modules/tools/access_files.tt: 8
# Looks like you failed 1 test of 3.
[16:44:56] xt/tt_valid.t
Dubious, test returned 1 (wstat 256, 0x100)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Katrin Fischer [Sat, 28 Apr 2018 00:30:55 +0000 (02:30 +0200)]
Bug 11317: (QA follow-up) Change tool name to be more general
I think this tool could be used in multiple ways, for all kinds
of files that you want to protect by login in Koha. So a more
general name might work better.
This is a suggestion, not mandatory.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 11317: (follow-up) Add two-level entry to koha-conf and remove unwanted characters
- Removed merge marker
- Changed include path in favor of using the Asset tt plugin (bug 20538)
- Changed access_dir to a two-level entry for clarity
Test plans stay the same, just make sure that the two-level configuration entry
work properly and everything pass QA.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 11317: Add a way to access files from the intranet
This squash contains all of these commits:
- Adds a page to access log files on the server from the intranet
- Update ID to allow for permalinking
- Rename config to "'accessdir' and fix qa
- Allows for multiple directories to be accessible
- Update the link under reports
- (Follow-up) Fixing merge error and cosmetic changes
- (Follow-up) Fix tab chars and move javascript to the footer
- (QA Follow-up) Fix datatable
- Make filename unicode-proof, renamed accessdir to access_dir and fix update
Test plans:
- Apply patch, update database
- Add to koha-conf:
<access_dir>/tmp/koha-public/one</access_dir>
<access_dir>/tmp/koha-public/two</access_dir>
<access_dir>/tmp/koha-public</access_dir>
- Create these directories ( mkdir /tmp/koha-public , etc...)
- Create these files:
echo "hello world!" > /tmp/koha-public/❤
echo "test" > /tmp/koha-public/one/samename.txt
echo "this is not the same" > /tmp/koha-public/two/samename.txt
- Login as Superadmin, go to tools > reports files
- Click on ❤, make sure it's downloadable and readable
- Click on both samename.txt, look inside and make sure the file is different
- Login as NON-superadmin. Go under tools, see no Report/Log under the third column
- Go to add tools/access_file permission to user
- See new entry under tools third column.
- validate link is ok.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Wed, 28 Mar 2018 22:40:09 +0000 (22:40 +0000)]
Bug 20103: Readonly::XS is completely bogus post perl 5.8
A ha! Lie about who we are, and the module will return a version.
./koha_perl_deps.pl -a
-- before patch Readonly::XS is 0
-- after patch it has a version number.
run koha qa test tools
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Josef Moravec [Mon, 19 Mar 2018 09:27:07 +0000 (09:27 +0000)]
Bug 20444: Use Koha::Patron::Attribute::Types object for getting patron attributes in letter.pl
Test plan:
0) Apply the patch
1) Do not have any patron attribute types defined
2) Go to Tools -> Notices and slips
3) Edit any slip/letter which uses table borrower
4) Confirm the editing works, and the slip/letter itself works
5) Add some patron attributes types and define them a value for any
patron
6) Go to Tools -> Notices and slips and edit any slip/letter which uses
table borrower
7) Confirm, the attributes are listed in available fields
8) Confirm the slip/letter is working when you add a attribute to it
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Alex Arnaud [Tue, 5 Dec 2017 10:43:05 +0000 (10:43 +0000)]
Bug 19752: offline_circ/service.pl - Return HTTP status 401 when authentication failed and add option nocookie
Test plan:
- Apply this patch,
- log in to Koha,
- go to cgi-bin/koha/offline_circ/service.pl with no valid user
and password as parameters and nocookie set to 1. i.e:
cgi-bin/koha/offline_circ/service.pl?userid=alex&password=wrongpass&nocookie=1,
- auth should fail
- check that the response code is 401
Signed-off-by: Maksim Sen <maksim.sen@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Victor Grousset [Tue, 16 Jan 2018 09:06:20 +0000 (10:06 +0100)]
Bug 19972: Make holds to pull list honors item-level_itypes syspref
And reflect that in the UI strings + variable names
Test plan:
1. Set syspref "item-level_itypes" to "specific item"
2. Create a hold on a record with one item
3. Change the document type of the item
4. Check that the item edition page and the record page show 2 different
types.
5. Go to /cgi-bin/koha/circ/pendingreserves.pl
6. Check that the displayed type is the item one
7. Set syspref "item-level_itypes" to "biblio record"
8. Go to /cgi-bin/koha/circ/pendingreserves.pl
9. See that the displayed type is the item one. When the sysopref says
"record"
This is the bug.
10. Apply this patch
11. Go to /cgi-bin/koha/circ/pendingreserves.pl
12. See that the displayed type now follows the syspref
13. Set syspref "item-level_itypes" to "specific item"
14. Go to /cgi-bin/koha/circ/pendingreserves.pl
15. See that the displayed type still follows the syspref
Signed-off-by: Lucie Gay <lucie.gay@ens-paris-saclay.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Thu, 26 Apr 2018 16:57:47 +0000 (16:57 +0000)]
Bug 20666: Correct permissions on opac-routing-lists.pl
You will need to have the 'Your routing lists' appear
in the opac-user page in order to trigger the error.
Make sure plack is off, and you will an error 500 page.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Thu, 26 Apr 2018 16:22:16 +0000 (16:22 +0000)]
Bug 20666: Correct executable permissions
TEST PLAN
---------
On a kohadevbox:
1) sudo koha-plack --enable kohadev
2) restart_all
3) Enter fines for a patron in the staff client
4) Go to the 'Fines' tab (left pane)
5) Go to the 'Account' tab (below the row of buttons)
6) Click 'Details'
-- no issues
7) sudo koha-plack --disable kohadev
8) restart_all
9) refresh page
-- Error 500
10) apply patch
11) restart_all
12) refresh page
-- no issues
13) sudo koha-plack --enable kohadev
14) restart_all
15) refresh page
-- no issues
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 24 Apr 2018 18:21:36 +0000 (15:21 -0300)]
Bug 20637: Fix filters content on the holds to pull screen
libraries and locations are separated by <br> whereas itypes are using
\n
This patch standardized the separator to generate correctly the filters
pulldown
Test plan:
- Place a hold on a biblio record which has several items
- Define different locations and itypes for these items
- Display the holds on the "Holds to pull" screen and make sure the
filters are working correctly (focus on the dropdown list)
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Wed, 25 Apr 2018 12:38:25 +0000 (12:38 +0000)]
Bug 20329: Text input fields are wider than the fieldset class they are inside of
This alternate patch defines a width of 100% for text inputs and selects
inside sidebar fieldsets. The scope of this style is limited to the
sidebar by unsetting the width for fieldsets within "#yui-main," the
main body of the page.
This patch also removes inline styles from two templates which are now
unnecessary.
To test, apply the patch and clear your cache if necessary.
View various pages which have a sidebar search form: acqui/invoices.pl,
members/members-home.pl, circ/overdue.pl, acqui/parcel.pl. Confirm that
form fields in the sidebar look correct.
Confirm that other forms styled with the "brief" class aren't
unintentionally affected by this patch. For example:
circ/request-article.pl, members/member-password.pl,
reports/reports-home.pl, reserve/request.pl
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Alex Buckley [Sun, 4 Mar 2018 05:31:15 +0000 (05:31 +0000)]
Bug 20329: Shorten the width of text input fields
This makes the text input fields fit tidily within the border of the
fieldset class elements they are within.
Test plan:
1. Go to the acqui/invoices.pl, members/members-home.pl,
circ/overdue.pl, acqui/parcel.pl and notice that the text input fields
on the fieldset element on the left hand side of the screen for
filtering search results are too wide and go over the border of the
fieldset element
2. Apply patch
3. Refresh the aforementioned pages and notice the text inputs have a
shortened width and now fit within the fielset class element
Sponsored-By: Catalyst IT Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Magnus Enger [Mon, 9 Apr 2018 10:39:23 +0000 (12:39 +0200)]
Bug 20546: Display shelving location on checkin
Currently, the sehlving location is not being displayed in the table
of checked in items on <intranet>/cgi-bin/koha/circ/returns.pl
To test:
- Make sure you have a couple of books with a value for shelving location (952$c)
- Check the books out
- Check the books in
- Verify nothing is displayed in the "Shelving location" column
- Apply this patch
- Check the books out and in again
- Verify the shelving location is now being displayed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 27 Feb 2018 16:36:21 +0000 (13:36 -0300)]
Bug 20304: Remove warnings from cataloguing scripts
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Fri, 23 Mar 2018 18:03:52 +0000 (15:03 -0300)]
Bug 18342: Mark Cache::Memcached as mandatory
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 27 Sep 2017 19:19:07 +0000 (16:19 -0300)]
Bug 18342: Enable memcached by default for new installs
Note that there is no way to create an install without memcached.
As it is now considered as stable, there is no point to not use it.
Test plan:
Create a new Koha install and make sure memcached is enabled by default
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Ere Maijala [Thu, 26 Apr 2018 13:08:25 +0000 (13:08 +0000)]
Bug 20665: Reset MySQL connection time zone in the OAI-PMH Provider
TEST PLAN
---------
apply unit test patch
prove t/db_dependent/OAI/Server.t
-- should fail
apply this patch
prove t/db_dependent/OAI/Server.t
-- should pass
run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Ere Maijala [Thu, 26 Apr 2018 13:05:51 +0000 (13:05 +0000)]
Bug 20665: Units tests for testing MySQL connection time zone
TEST PLAN
---------
apply this test patch
prove t/db_dependent/OAI/Server.t
-- should fail
apply the other patch
prove t/db_dependent/OAI/Server.t
-- should pass
run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
David Bourgault [Tue, 1 May 2018 19:09:53 +0000 (15:09 -0400)]
Bug 19466: Turn AutoCalc off for new installs
Default value of AutoMemberNum is now 0.
TEST PLAN:
0. Do a fresh install of Koha
1. In system preferences AutoMemberNum should be off
2. No warning should be shown next to the cardnumber field in the patron creation form.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 25 Apr 2018 19:52:07 +0000 (16:52 -0300)]
Bug 20659: Fix blocking errors display
The include file blocking-errors.inc has been created to by-pass regular
processing and display an error that should block the elements of the
view.
For instance you call a patron's page with invalid borrowernumber => we
do not want the app to crash (500) or the page to display with broken
elements.
It worked well on bug 18403 but it's now broken, a blank page is
displayed instead.
It may be caused by the move of the JS to the bottom of the page.
Test plan:
hit /cgi-bin/koha/members/moremember.pl?borrowernumber=45432
Without this patch a blank page is displayed.
With this patch you see the blocking error
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 23 Apr 2018 13:37:48 +0000 (10:37 -0300)]
Bug 19204: Add tests for new days_mode parameter
Sponsored-by: Goethe-Institut Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 23 Apr 2018 21:52:00 +0000 (18:52 -0300)]
Bug 19204: Add a test: holiday is expiration date
Sponsored-by: Goethe-Institut Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 23 Apr 2018 21:12:00 +0000 (18:12 -0300)]
Bug 19204: Clean the tests a bit to reuse the same pattern
The same pattern is used several times in test:
checkout, checkin, get the debarment, compare the dates and remove the
debarment.
Let's move that to a separate subroutine
Sponsored-by: Goethe-Institut Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 23 Apr 2018 18:23:00 +0000 (15:23 -0300)]
Bug 19204: Make the debarment date calculation depends on finesCalendar
This patchs adds the ability to calculate the end of the suspension date
(debarment date) using the finesCalendar syspref.
Prior to this patch it was never calculating without taking into account
the calendar.
calculated without taking holidays into account.
This was a problem because the restriction could end in the middle of a
period the library is closed.
Test plan:
- Set finescalendar to 'not including days the library is closed'
- Set a circulation condition with no fine/maxfine, but fine days and
max fine days instead
- Check out an item with a due date in the past
- Check the item in and verify the restriction date
- Clean the restriction
- Add holidays to your calendar on the calculated restriction date
- Check the item out again with the same due date in the past
- Check in the item again
- Verify the calculated restriction end date has changed, it's set to the day
after the holiday.
Fines in days restriction calculation is correctly taking calendar
into account.
Sponsored-by: Goethe-Institut Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 20100: (QA follow-up) Pref description and improve code in member-flags
Two points as mentioned on Bugzilla comment29.
[1] Improve pref description. Feedback from comment30 incorporated.
[2] Improve code in member-flags. Check if we change librarian flag first.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested the die with "disable_superlibrarian_privs => 0" in member-flags.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Wed, 31 Jan 2018 15:47:23 +0000 (16:47 +0100)]
Bug 20100: Disallow access to superlibrarian privileges at client side
This last patch activates the check at client side.
If the pref ProtectSuperlibPrivs is enabled, non-superlibs should not be
able to change superlibrarian privileges via the interface.
Test plan:
[1] Enable the pref.
[2] Login as superlib and add/remove superlib privs to a staff user.
[3] Login as another user (no superlib, but having borrowers, permissions
and staff_access). Verify that you cannot add or remove superlib
privs.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Wed, 31 Jan 2018 14:02:36 +0000 (15:02 +0100)]
Bug 20100: Disallow access to superlib privileges at server side
Depends on pref ProtectSuperlibPrivs.
If enabled, script member-flags.pl will not allow you to add or remove
superlib privs when you are no superlibrarian.
The follow-up patch will enable the check at client side.
Test plan:
[1] Enable the pref. Do not apply the third patch (client side).
[2] Login as superlib and add/remove superlib privs to a staff user.
[3] Login as another user (no superlib, but having borrowers, permissions
and staff_access). Verify that you have an internal server error when
you add or remove superlib privs. The log contains a warning.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This pref allows you to block changes to superlibrarian privileges at
client and server side for non-superlibrarians.
This patch only contains the db rev and the preference description.
Test plan:
Run dbrev or new install. Check pref value.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Katrin Fischer [Sat, 21 Apr 2018 00:40:15 +0000 (00:40 +0000)]
Bug 2696: (QA follow-up) Several fixes to template variables
- Fix link to patron account in breadcrumbs
- Fix includes for accounttype.inc to display type correctly
- in Details for fee
- in Payments list
- Fix use CGI qw ( -utf8 );
- Remove <br> from within a string for better translation
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Kyle M Hall [Thu, 21 Dec 2017 14:15:52 +0000 (14:15 +0000)]
Bug 2696: Fine payments should show what was paid for
Test Plan:
1) Apply this patch and its' dependencies
2) Create and pay some various fees and fines
3) View the payments for fees, and fees paid by payments by
using the new 'Details' button available on boraccount.pl
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Running updatedatabase.pl after patch application makes dependencies
happy. Passes QA Tools and works as intended.
Rebased (2017-12-21): Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 2696: (QA follow-up) - Remove use of GetMember
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Wed, 28 Mar 2018 02:47:18 +0000 (02:47 +0000)]
Bug 20482: Correct Terminology codes to Bibliographic ones
"RELATIONSHIP TO ISO 639-2
ISO 639-2 (Codes for the representation of names of
languages-- Part 2: alpha-3 code) was based on the MARC
Code List for Languages and published in 1998. In the 22
cases where the ISO 639-2 list has two alternative codes,
the bibliographic code is the same as the MARC code."
(http://www.loc.gov/marc/languages/introduction.pdf)
This leads me to believe that eus, mri, and sqi are
incorrect. The slk code was corrected on an earlier bug.
TEST PLAN
----------
Apply patch
Do a database upgrade
-- Are eus, mri, and sqi fixed?
reset_all
-- Are eus, mri, and sqi never there in the first place?
koha qa test tools only check perl code.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Radek Šiman [Thu, 8 Mar 2018 21:28:37 +0000 (22:28 +0100)]
Bug 20245: Wrong language code for Slovak
This patch updates iso639_2_code value for Slovak language
Test plan:
1) Obtain a biblio record having 'slo' value in its language
code (marc field 041a)
2) Try to find it through Advanced search + more options
with language set to Slovak
3) Nothing is found
4) Apply this patch
5) Repeat steps 1 and 2
6) Record is found now
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 23 Apr 2018 19:19:50 +0000 (16:19 -0300)]
Bug 20616: Prevent "edit serials" form submission if no serial is selected
In order to prevent the form to submit and gives an ugly error if no
issues are selected we will make sure at least one is checked otherwise
an alert will be displayed.
Test plan:
- create a subscrpition
- go to the serials collection page
- don't check any checkboxes for serials
- click 'Edit serials'
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 23 Apr 2018 15:07:58 +0000 (12:07 -0300)]
Bug 20625: Handle non existing of active currency
This patch avoid the explosion in the air when creating a new patron
category and no active currency is defined.
Test plan:
Remove the currencies, create a new patron category
Without this patch applied you will get
Can't call method "p_sep_by_space" on an undefined value
With this patch the form will be displayed correctly and you will be
able to create the patron category
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Fri, 20 Apr 2018 18:35:14 +0000 (18:35 +0000)]
Bug 20617: Add 'Search Engine configuration' link to administration menu
This patch adds a link to the Elasticsearch configuration page in the
administration sidebar menu when Elasticsearch is enabled.
This patch also corrects the title of the Elasticsearch page to match
the page heading. "Search engine configuration" instead of
"Elasticsearch mappings."
To test, apply the patch and set the SearchEngine system preference to
"Elasticsearch."
- View any page in the administration module which shows the
left-hand sidebar menu. The link to search engine configuration
should be there.
- View the search engine configuration page and confirm that the page
title is correct.
- Set the SearchEngine system preferenc to "Zebra."
- The search engine configuration link should no longer appear in the
administration sidebar menu.
Signed-off-by: David Bourgault <david.bourgault@inlibro.com> Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
User views the "Your privacy" -page, it shows "No reading history to
delete", even when the user has history.
Test plan:
- Turn OPACPrivacy on
- Go to opac-privacy.pl
- Click the "Immediate deletion button" to delete the reading history
=> If the patron has reading history you must get "Your reading history has been deleted."
Otherwise "No reading history to delete"
Note that this patch reintroduce the "something went wrong" message if
the deletion failed for whatever reason.
Signed-off-by: David Bourgault <david.bourgault@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 13445: Remove URL option from scheduled reports, add Text option
Remove the non-functional 'URL' format
Offer the (functional) CSV & HTML formats
testing plan:
- visit the task scheduler tool at cgi-bin/koha/tools/scheduler.pl
- 'Output format' select list should offer Text (TSV), CSV, & HTML
- scheduled reports for each of the above types should run & send emails correctly
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Maksim Sen <maksim.sen@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Ere Maijala [Tue, 23 Jan 2018 13:21:31 +0000 (15:21 +0200)]
Bug 20073: Move Elasticsearch configs to yaml files and improve the default settings.
Improvements:
1) Index settings moved from code to etc/searchengine/elasticsearch/index_config.yaml. An alternative can be specified in koha-conf.xml.
2) Field settings moved from code to etc/searchengine/elasticsearch/field_config.yaml. An alternative can be specified in koha-conf.xml.
3) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch. An alternative can be specified in koha-conf.xml.
4) Default settings have been improved to remove punctuation from phrases used for sorting etc.
5) State variables are used for storing configuration to avoid parsing it multiple times.
6) A possibility to reset the fields too has been added to the reset operation of mappings administration.
7) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch.
8) An stdno field type has been added for standard identifiers.
To test:
1) Run tests in t/Koha/SearchEngine/Elasticsearch.t
2) Clear tables search_fields and search_marc_map
3) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
4) Verify that admin/searchengine/elasticsearch/mappings.pl displays the mappings properly, including ISBN and other standard number fields.
5) Index some records using the -d parameter with misc/search_tools/rebuild_elastic_search.pl to recreate the index
6) Verify that you can find the records
7) Put <elasticsearch_index_mappings>non_existent</elasticsearch_index_mappings> to koha-conf.xml
8) Verify that admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1 fails because it can't find non_existent.
9) Copy etc/searchengine/elasticsearch/mappings.yaml to a new location and make elasticsearch_index_mappings setting in koha-conf.xml point to it.
10) Make a change in the new mappings.yaml.
11) Clear table search_fields (mappings reset doesn't do it yet, see bug 20248)
12) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
13) Verify that the changes you made are now visible in the mappings UI
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 20 Dec 2017 20:01:08 +0000 (17:01 -0300)]
Bug 19855: Move getalert, addalert and delalert to Koha::Subscription
This patch removes 3 subroutines from C4::Letters:
- getalert
- addalert
- delalert
And add 3 methods to Koha::Subscription:
- subscribers
- add_subscriber
- remove_subscriber
It makes the code cleaner for future cleanup.
TODO - we should remove alert.alertid and alert.type, and rename
alert.externalid with alert.subscriptionid
That way alert will be renamed borrowers_subscriptions (or similar) and
will become a simple join table between borrowers and subscriptions.
We will need to deal with FK that could not be satisfied.
Let's do that after this patch is pushed.
Test plan:
Subscribe and unsubscribe to email notifications sent when a new issues
is available.
Make sure everything works as before and you receive the emails.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 20 Dec 2017 17:26:39 +0000 (14:26 -0300)]
Bug 19855: Remove $type from the alerts
It looks like this feature has never been finished. It has been
developed with more flexibility in mind, but only 'issue' is used for
this parameter. Apparently it could have been 'virtual', for virtual shelves.
Let remove this parameter and clean the code a bit.
TODO: Remove the DB column
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 20 Dec 2017 17:14:57 +0000 (14:14 -0300)]
Bug 19855: Remove C4::Letters::findrelatedto
This subroutine is called only once. It only concat firstname and
surname for subscribers.
It can be easily replaced with Koha::Patron
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 20 Dec 2017 17:10:44 +0000 (14:10 -0300)]
Bug 19855: Remove getalert from moremember.pl
This is not used later and seems unused since:
commit b38997925f603dc9784c25d3db3501644c19e068
Date: Wed Oct 26 09:11:02 2005 +0000
big commit, still breaking things...
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 17 Apr 2018 21:14:22 +0000 (18:14 -0300)]
Bug 18426: Address QA issues
- Replaced with the "action" links we already have on the biblio detail
page and the items lost report.
- Display all the editable values in the table
- Add a 'Cancel' link
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Julian Maurice [Tue, 11 Apr 2017 16:07:47 +0000 (18:07 +0200)]
Bug 18426: Allow to edit subscriptions in batch
This adds a checkbox column in serials-search.pl tables that allow to edit
selected subscriptions.
The following fields can be modified:
- Bookseller
- Location
- Library
- Item type
- Public note
- Nonpublic note
- "Create item when receiving" flag
- Expiration date
+ the additional fields defined in serials/add_fields.pl
Test plan:
1. Go to Serials module
2. If there is no additional fields defined, define some (at least one with an
authorized value and one without)
3. Start a subscription search
4. Select some results using the checkboxes and click the "Edit" button above
the table
5. Select values for some fields (not all) and click "Start batch edit"
6. Verify you are being redirected to the previous search results
7. Verify that the fields for which you selected a value were modified and that
the others fields weren't
8. Repeat steps 4 to 7 but this time, modify the other fields.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Fri, 20 Apr 2018 10:07:19 +0000 (06:07 -0400)]
Bug 20622: Add some color to bootstrap modal headers and footers
Right now the bootstrap modal header, body and footer are all white. It would be nice to give them a bit of color.
Test Plan:
1) Apply this patch
2) Find a patron, click the 'add message' button
3) Note the modal header and footer now have a background color
Signed-off-by: Kyle M Hall <kyle@bywatetsolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 12 Dec 2017 17:14:56 +0000 (14:14 -0300)]
Bug 19287: Add ability to mark an item 'Lost' from 'Holds to pull' list
The goal to this enhancement is to add the ability to cancel a hold and
mark items as lost from the 'Holds to pull' page.
A new pref is added to control the behaviour, default is off
To mark items as lost you need to set the new pref CanMarkHoldsToPullAsLost to one of these two values:
- "Allow to mark items as lost"
=> The item will be marked as lost and the hold will be cancelled
- "Allow to mark items as lost and notify the patron"
=> Same as previously but the patron will be notified as well.
The notification is done using a new notice template (code=CANCEL_HOLD_ON_LOST).
Feel free to suggest another default wording.
To update the values of the items when one of these 2 buttons are used, you need to
fill the UpdateItemWhenLostFromHoldList with something like: 'itemlost: 1'
Test plan:
1/ Place holds on some items
2/ Go to Home > Circulation > Holds to pull
From here you can cancel the hold or
3/ Mark the items as lost
=> You will receive feedback messages depending on different situations:
* The CANCEL_HOLD_ON_LOST does not exist
* The patron does not have an email address (but the notice has been
enqueued! It is the current behaviour with other notices)
* The notice has been enqueued
* The hold has been cancelled
QA Notes:
From which library do we want to pick the notice? This patch use
reserves.branchcode
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jon Knight [Wed, 28 Mar 2018 16:29:43 +0000 (16:29 +0000)]
Bug 19479: Display price in basket group formatted according to CurrencyFormat syspref using templates.
On the page acqui/basketgroup.pl the prices of baskets should be shown
formatted according to the selected CurrencyFormat syspref, with no
currency symbol or code.
Test plan:
1) Create a basket with items in it worth more than 1000 currency units.
2) Close the basket.
3) Go to acqui/basketgroup.pl page and check that the price format matches
the current CurrencyFormat syspref.
4) Go to Administration and change CurrencyFormat syspref to one of the
other available options and recheck step 3.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed some tabs.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
projects / koha.git / log