]> git.koha-community.org Git - koha.git/log
koha.git
3 years agoBug 28845: Match against the full limit string, not just the group id
Nick Clemens [Wed, 11 Aug 2021 15:30:36 +0000 (15:30 +0000)]
Bug 28845: Match against the full limit string, not just the group id

To test:
1 - Add to OPAC virtual host in apache conf:
   SetEnv OPAC_SEARCH_LIMIT branch:multibranch-1
   SetEnv OPAC_LIMIT_OVERRIDE 1
   RequestHeader add X-Koha-SetEnv "OPAC_SEARCH_LIMIT branch:multibranchlimit-1"
   RequestHeader add X-Koha-SetEnv "OPAC_LIMIT_OVERRIDE 1"
2 - Enable system preference OpacAddMastheadLibraryPulldown
3 - Create a library group enabled as OPAC search group (or make sure existing group 1 is an OPAC search group)
4 - Load the opac - dropdown does not pree-select the search group
5 - Apply patch
6 - Relaod opac - group is pre-selected!

Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28676: Cache and retrieve match_count when searching a cached heading
Nick Clemens [Wed, 7 Jul 2021 15:39:43 +0000 (15:39 +0000)]
Bug 28676: Cache and retrieve match_count when searching a cached heading

We use match_count to determine if a new authority record should be created, however,
we were not adding this count to the cache, so if a record returned too many matches on first
lookup, we would create a new record on the second lookup

To test:
1 - Set Linker Module to 'Default'
2 - Enable  AutoCreateAuthorities  and  BiblioAddsAuthorities and  CatalogModuleRelink and LinkerRelink
3 - Add two copies of a single authority via Z39
4 - Add two headings for that authority to a bib record (e.g. a 610 and 710)
5 - Save the record and note a new authority is generated
6 - Repeat and see another is generated
7 - Apply patch
8 - Restart all the things
9 - Save the record again, no new authority created

Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28676: Unit test
Nick Clemens [Wed, 7 Jul 2021 15:39:21 +0000 (15:39 +0000)]
Bug 28676: Unit test

Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28960: Explicitly call get_column
Martin Renvoize [Tue, 7 Sep 2021 11:14:03 +0000 (12:14 +0100)]
Bug 28960: Explicitly call get_column

This patch adds get_column to ensure we are returning a string value of
a field rather than accidentally triggering a relationship accessor.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 17600: Fix opac/svc/overdrive
Jonathan Druart [Tue, 14 Sep 2021 16:22:13 +0000 (18:22 +0200)]
Bug 17600: Fix opac/svc/overdrive

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28946: (bug 23271 follow-up) Missing occurrence in add_user_search.pl
Jonathan Druart [Fri, 10 Sep 2021 08:03:05 +0000 (10:03 +0200)]
Bug 28946: (bug 23271 follow-up) Missing occurrence in add_user_search.pl

commit f6e0b04f48e8f0a02dbb8d48152646257d9accba
Bug 23271: Replace search_limited with search_with_library_limits

We were modifying the occurrences of:
  Koha::Patron::Categories->search_limited;
with:
  Koha::Patron::Categories->search_with_library_limits;

But between the patch submission and the push, another occurrence has
been added by bug 23590.

Test plan:
Create a new suggestion from staff and click "select manager"
Without the patch, notice the error:
  The method Koha::Patron::Categories->search_limited is not covered by tests!
With the patch applied everything is working correctly

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28921: Remove warning from html_helpers.inc
Didier Gautheron [Mon, 30 Aug 2021 14:26:05 +0000 (16:26 +0200)]
Bug 28921: Remove warning from html_helpers.inc

Argument "" isn't numeric in numeric gt (>) at /home/koha/src/koha-tmpl/opac-tmpl/bootstrap/en/includes/html_helpers.inc line 23.

To test:
1 - Open OPAC main page
2 - Check opac-error.log or plack-opac-error.log for message as above
3 - Apply patch
4 - Open OPAC main page
5 - Check opac-error.log again, there should be no more warnings

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28149: (follow-up) Add string for job status "new"
Owen Leonard [Tue, 17 Aug 2021 10:17:35 +0000 (10:17 +0000)]
Bug 28149: (follow-up) Add string for job status "new"

Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28149: Improve internationalization and formatting on background jobs page
Owen Leonard [Wed, 14 Apr 2021 17:43:38 +0000 (17:43 +0000)]
Bug 28149: Improve internationalization and formatting on background jobs page

This patch adds some logic to the background jobs template in order to
make job status and job type translatable. Output of dates has been
changed to use the KohaDates plugin, using the "with_hours" flag.

This patch also modifies the page title and breadcrumbs so that if one
is viewing the details of a background job the page title and
breadcrumbs reflect this.

I've also added inclusion of the preferences search form in the header,
the default for administration pages which don't have their own search.

To test, apply the patch and go to Administration -> Background jobs.

 - If there are no background jobs listed, submit at least one batch of
   bibliograhpic records and at least one batch of authorty records for
   modification (Tools -> Batch record modification).
   - In the table of background jobs, the status should be shown
     correctly. If you see it capitalized ("Finished") you're seeing the
     new string in the template which will be used for translation.
   - In the "Type" column, you should see either "Batch authority record
     modification" or "Batch bibliographic record modification"
   - In the "Queued," "Started," and "Ended" columns the date should be
     formatted according to your system's dateformat system preference,
     including the time.
  - View the details of a background job. The same changes to status and
    type should be seen on this page, as well as the date formatting of
    the date fields.
    - In the breadcrumbs, confirm that it shows a link to the
      background jobs page followed by "Details if job #X".

Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28392: make streettype and B_streettype work with BorrowerUnwantedField
Lucas Gass [Wed, 1 Sep 2021 14:17:21 +0000 (14:17 +0000)]
Bug 28392: make streettype and B_streettype work with BorrowerUnwantedField

To test:
1. Add values to the AV ROADTYPE
2. Go to the BorrowerUnwantedField system preference and attempt to hide streettype and B_streettype.
3. It doesn't work, the fields still show.
4. Apply patch
5. Repeat step 2, it should work now.

Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 21794: (QA follow-up) Separate city and country with a comma
Joonas Kylmälä [Sat, 4 Sep 2021 18:23:16 +0000 (18:23 +0000)]
Bug 21794: (QA follow-up) Separate city and country with a comma

If only the city and country address information was provided they ended
up being glued together like this: CityCountry. (AddressFormat=US style)

Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 21794: Fix display of addresses on details tab in staff when city is empty
Katrin Fischer [Mon, 23 Aug 2021 22:34:13 +0000 (00:34 +0200)]
Bug 21794: Fix display of addresses on details tab in staff when city is empty

If the city field was not filled out on the main or alternate address,
the content of state, country and zipcode wouldn't display on the
Details tab in the patron account in staff.

To test:
- Enter main contact and alternate address without city
- Verify that the address information isn't shown on the details
  tab after saving
- Apply patch
- Verify that the information is displayed now
- Toggle AddressFormat and check display is correct for all settings
- Switch back to US address format
- Try several combinations of empty fields for city, zipcode, country
  and state. The punctuation and whitespace should always appear
  correctly.

Examples:
- Enter just country
- Enter zipcode and country
- ...

Signed-off-by: Hayley Pelham <hayleypelham@catalyst.net.nz>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28936: Add sort1/sort2 to borrowers.json
Lucas Gass [Wed, 1 Sep 2021 16:24:52 +0000 (16:24 +0000)]
Bug 28936: Add sort1/sort2 to borrowers.json

To Test:
1. Check the BorrowerMandatoryField and BorrowerUnwantedField system preferences, sort1 and sort2 cannot be hidden or required
2. Apply patch
3. Check the BorrowerMandatoryField and BorrowerUnwantedField system preferences again, you should see sort1 and sort2
4. Since sort1 and sort2 are now added to borrowers.json we must also check the system preferences PatronQuickAddFields & PatronDuplicateMatchingAddFields
5. They should both now include sort1 and sort2, check to make sure they work with these two system preferences
6. Look at the system preferences PatronSelfRegistrationBorrowerMandatoryField, PatronSelfRegistrationBorrowerUnwantedField, and PatronSelfModificationBorrowerUnwantedField
7. sort1 and sort2 should be disabled in these OPAC system preferences

This patch does not attempt to add sort1 or sort2 to the self reg or borrower mod pages. If they should be added, which I am not sure they should, we should do so in a seperate bug

Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 10265: (QA follow-up) Make if-else checks consistent
Joonas Kylmälä [Sun, 5 Sep 2021 12:10:17 +0000 (12:10 +0000)]
Bug 10265: (QA follow-up) Make if-else checks consistent

The != '' version doesn't check for the whitespace existing and thus
might have added the punctuation without the partNumber or partName being
inserted at all.

Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 10265: Keep punctuation for 8xx series added entry fields (MARC21)
Katrin Fischer [Sun, 22 Aug 2021 03:29:47 +0000 (03:29 +0000)]
Bug 10265: Keep punctuation for 8xx series added entry fields (MARC21)

At the moment the punctuation entered for $n $p and is
removed in the part template, which leads to displaying the subfields
without any punctuation and spaces in between.

To test:
- Catalog records with various combinations of 8xx series added
  entry fields. Subfield a, t, n, p and v are the most important.
- Verify the display in OPAC and staff is not great.
- Apply the patch.
- Verify the display in OPAC and staff is improved.

For examples see:
https://www.loc.gov/marc/bibliographic/bd80x83x.html

Important note: At the moment 8xx series added entry fields will only display, when
there is also a 490 ind. 1 = 1 field present.

Signed-off-by: Hayley Pelham <hayleypelham@catalyst.net.nz>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28912: Remove duplicated warnings on the about page
Jonathan Druart [Fri, 27 Aug 2021 14:59:43 +0000 (16:59 +0200)]
Bug 28912: Remove duplicated warnings on the about page

Bad conflict resolution

Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28912: Prevent Pseudonymization to be set if bcrypt_settings not set
Jonathan Druart [Fri, 27 Aug 2021 14:56:08 +0000 (16:56 +0200)]
Bug 28912: Prevent Pseudonymization to be set if bcrypt_settings not set

If Pseudonymization is set but the bcrypt_settings config used by the
feature is not set, then there is an ugly 500 on checking out.

bad bcrypt settings at /kohadevbox/koha/Koha/PseudonymizedTransaction.pm line 116.

However it's pretty hard to handle correctly this exception (and that's
why it hasn't be done initially). However we could prevent the pref to
be turned on if the config entry is not present.

Test plan:
Remove the bcrypt_settings from the config
Try to turn the syspref on
Add the config
Try to turn the syspref on/off

Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
JD amended patch: fix qa failures

Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28882: Disable select/hide all links
Jonathan Druart [Wed, 25 Aug 2021 09:47:18 +0000 (11:47 +0200)]
Bug 28882: Disable select/hide all links

We want to prevent non-superlibrarian users to remove superlibrarian
flag.
It's handled already in the controller, but needs to be done
client-side.

Here we are disabling the select/hide all links to remove the remaining
possibility to remove the superlibrarian flag from non-superlibrarian
users.

Signed-off-by: Hayley Pelham <hayleypelham@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28882: permission UI allows selection of superlibrarian permission
Jonathan Druart [Thu, 19 Aug 2021 13:07:50 +0000 (15:07 +0200)]
Bug 28882: permission UI allows selection of superlibrarian permission

With bug 20100 and 22150 we allow to select all the permissions but the
superlibrarian permission, to ease the selection. And we also forbid a
non-superlibrarian user to add superlibrarian permission.

However there is something wrong in the JS code and it's possible to add
the superlibrarian permission. The user is getting an ugly 500 and so
the permission change is not done, but the UI checks must be fixed.

To recreate:
Login with a non-superlibrarian user
Edit permission
Clear all
=> You can select the "superlibrarian" permission

Test plan:
Login with a non-superlibrarian user
Try to set the superlibrarian permissions to a user
=> not possible
Try the select all/clear all
=> still cannot set the superlibrarian permission

Work to be done:
Login with a non-superlibrarian user
Edit permissions for a superlibrarian user
=> You can remove it, then cannot add it back
Should we allow removal of superlibrarian permission by
non-superlibrarian user?

Signed-off-by: Hayley Pelham <hayleypelham@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28306: Fix t/db_dependent/Koha/Objects.t
Julian Maurice [Tue, 31 Aug 2021 12:00:00 +0000 (14:00 +0200)]
Bug 28306: Fix t/db_dependent/Koha/Objects.t

It looks like a circular dependency problem where methods are
not exported correctly

There is at least one circular dependency here:

    C4::Context -> Koha::Caches -> Koha::Cache -> C4::Context
    (-> means "uses")

The tests pass if C4::Context is loaded early, so the patch does that.

Circular dependencies should be fixed ideally, but it is a little
more complicated, and I don't have the time right now...

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28373: (follow-up) Fix copy error
Nick Clemens [Fri, 3 Sep 2021 15:25:32 +0000 (15:25 +0000)]
Bug 28373: (follow-up) Fix copy error

Previous commit linked all 'default' buttons for sysprefs to OPACXSLTListsDisplay

This adjusts the links

To test:
Click "default" for all 6 XSLT preferences
Confirm the syspref relating to the link is marked 'modified' when clicked

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28938: Correct Flatpickr's default 12hr time formatting
Owen Leonard [Wed, 1 Sep 2021 18:08:49 +0000 (18:08 +0000)]
Bug 28938: Correct Flatpickr's default 12hr time formatting

This patch corrects Flatpickr's default 12 time formatting so that it
uses the formatting token "G" ("Hours, 2 digits with leading zeros")
instead of "h" ("Hours, 2 digits without leading zeros").

This will prevent incorrect times from being saved when the submitted
time is before 12.

- To test, apply the patch go to Administration -> System preferences.
- Set the TimeFormat system preference to "12 hour"
- Find an item which is checked out and renewable.
- Go to Circulation -> Renew and use the date picker to select a time <
  12, e.g. 9:00 AM
- Submit the barcode for renewal.
- Check the patron's account to see the due date of the renewed item: It
  should match the date and time you selected.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 20529: Remove other occurrences of decodeURIComponent from browser.js
Jonathan Druart [Fri, 9 Jul 2021 14:01:43 +0000 (16:01 +0200)]
Bug 20529: Remove other occurrences of decodeURIComponent from browser.js

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 20529: Fix "Return to results" link broken by a double quote
Victor Grousset [Mon, 16 Apr 2018 16:55:48 +0000 (18:55 +0200)]
Bug 20529: Fix "Return to results" link broken by a double quote

(in the search query)

cause: decodeURIComponent used when URI encoding was necessary. (At
least in main usecase of this feature)
It could have been a copy and paste error. From the above
browseRecords() function.

== Test plan ==
1. Search in the staff catalogue «a "alice"»
     Replace a and alice with whatever than will return a result for you
2. Click on the first result
3. Check the "Return to results" link
     It should be like
     staff_url://cgi-bin/koha/catalogue/search.pl?idx=kw&q=a
     This is the bug. Because when clicking the link, your search will be
     'kw,wrdl: a'
     instead of
     'kw,wrdl: a "alice"'
4. Apply this patch.
5. Search in the staff catalogue «a "alice"»
     Replace a and alice with whatever than will return a result for you
6. Click on the first result
7. Check the "Return to results" link
     The link should preserve the full query

Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28928: Minor follow-ups to Bug 28376 - Flatpickr introduction
Owen Leonard [Tue, 31 Aug 2021 12:09:44 +0000 (12:09 +0000)]
Bug 28928: Minor follow-ups to Bug 28376 - Flatpickr introduction

This patch corrects three errors in the original Flatpickr introduction
patch:

- Missing document.ready() in borrowers_stats.tt.
- Redundant calendarFirstDayOfWeek setting in caregories.js
- Missing preventDefault() in calendar.inc

The first two issues don't appear to cause any malfunction but are best
practices. The third issue can cause the page to scroll unexpectedly.

To reproduce this bug, go to (for instance) Administration -> Patron
categories -> New category.

 - If necessary, narrow the height of your browser window so that there
   is a vertical scrollbar.
 - Scroll down the page so that the "Until date" field is at the top.
 - Click the "X" next to the field.
 - The page will scroll to the top.

Apply the patch and test again. The page jump should not occur.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 25078: Fix indentation and style for additional descriptions
Jonathan Druart [Tue, 31 Aug 2021 08:26:05 +0000 (10:26 +0200)]
Bug 25078: Fix indentation and style for additional descriptions

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 26195: Add a way to specify authorised values should be expanded [OAI]
Tomas Cohen Arazi [Thu, 13 Aug 2020 17:50:16 +0000 (14:50 -0300)]
Bug 26195: Add a way to specify authorised values should be expanded [OAI]

This patch introduces a new configuration entry for OAI so the resulting
records include authorised value descriptions instead of codes.

This is off by default.

To test:
1. Create a yaml file with the extended OAI configuration
2. Visit http://kohadev.myDNSname.org:8080/cgi-bin/koha/oai.pl
3. Browse some records
=> SUCCESS: The fields tied to AV show codes.
4. Update your configuration with 'expanded_avs: 1' for one  of the
   defined format like in:

  ---
  format:
    marc21:
      metadataPrefix: marc21
      metadataNamespace: http://www.loc.gov/MARC21/slim http://www.loc.gov/standards/marcxml/schema/MARC21slim
      schema: http://www.loc.gov/MARC21/slim http://www.loc.gov/standards/marcxml/schema/MARC21slim.xsd
      include_items: 0
    marcxml:
      metadataPrefix: marcxml
      metadataNamespace: http://www.loc.gov/MARC21/slim http://www.loc.gov/standards/marcxml/schema/MARC21slim
      schema: http://www.loc.gov/MARC21/slim http://www.loc.gov/standards/marcxml/schema/MARC21slim.xsd
      include_items: 1
      expanded_avs: 1
5. restart_all
6. Repead 3
=> SUCCESS: AV descriptions are returned!
7. Sign off :-D

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28306: Fix POD
Kyle M Hall [Fri, 23 Jul 2021 19:19:30 +0000 (15:19 -0400)]
Bug 28306: Fix POD

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28306: Switch back to using 'mock' instead of 'redefine'
Kyle M Hall [Fri, 23 Jul 2021 19:11:52 +0000 (15:11 -0400)]
Bug 28306: Switch back to using 'mock' instead of 'redefine'

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28306: Allow to query database with minimal memory footprint
Julian Maurice [Mon, 10 May 2021 06:54:35 +0000 (08:54 +0200)]
Bug 28306: Allow to query database with minimal memory footprint

The goal is to be able to build a database handler (dbh) and to execute
queries without loading unnecessary stuff. This will be useful to reduce
memory usage of daemons that need to check the database
periodically

The patch provides a new method Koha::Database::dbh which returns a
database handler without loading the DBIx::Class schema. This method is
also used by DBIx::Class, so whether you use DBI or DBIx::Class, the
same method is used to initialize the connection.

The patch also moves some code in order to avoid loading C4::Context:
- C4::Context::timezone moves to Koha::Config
- C4::Context::db_scheme2dbi moves to Koha::Database

To measure memory usage I used the following commands:

* before the patch:
perl -MKoha::Database \
    -E 'Koha::Database->schema->storage->dbh->do("select 1");' \
    -E '$|=1; say $$; sleep 2' \
    | while read pid; do ps -p $pid -o rss=; done

* after the patch:
perl -MKoha::Database \
    -E 'Koha::Database->dbh->do("select 1");' \
    -E '$|=1; say $$; sleep 2' \
    | while read pid; do ps -p $pid -o rss=; done

It will give you the RSS (Resident Set Size) of the perl process in kB

What I get:
* before the patch: between 96.9MB and 97.2MB
* after the patch: between 17.8MB and 18.2MB

Note that if a timezone is configured (either from $KOHA_CONF or
TZ environment variable), Koha will load DateTime::Timezone to check if
it's valid, and it increases RSS to 36MB

Another interesting metric is the number of modules loaded:
* before the patch:
perl -MKoha::Database \
    -E 'Koha::Database->schema->storage->dbh;' \
    -E 'say scalar keys %INC'

Result: 567

* after the patch:
perl -MKoha::Database \
    -E 'Koha::Database->dbh;' \
    -E 'say scalar keys %INC'

Result: 51

Test plan:
1. Apply the patch & restart starman
2. Make sure Koha is still ok (ie. can access the database, does not
have encoding issues, ...)
3. Run the tests in t/Context.t, t/Koha/Config.t,
t/db_dependent/Koha/Database.t, t/timezones.t

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28774: DBRev 21.06.00.021
Jonathan Druart [Tue, 31 Aug 2021 08:16:49 +0000 (10:16 +0200)]
Bug 28774: DBRev 21.06.00.021

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28774: Don't store blank values for rental discount
Nick Clemens [Wed, 28 Jul 2021 12:23:50 +0000 (12:23 +0000)]
Bug 28774: Don't store blank values for rental discount

This patch adds 'can_be_blank => 0' for the rentaldiscount rule to prevent
storing blank values in the database

Additionally, if there is no charge we do not need to check for a discount
and can simply return

To test:
1 - Set rental discount to "" to a rule in circulation rules
2 - Checkout an item that will follow this rule
3 - Check the intranet log:
    [WARN] Argument "" isn't numeric in subtraction (-) at /kohadevbox/koha/C4/Circulation.pm line 3385.
4 - Apply patch and restart all
5 - Update database
6 - Set the rule to "" again
7 - Check the DB, no rule is stored
    SELECT * FROM circulation_rules WHERE rule_name = 'rentaldiscount';
8 - Checkout the item again
9 - No warns in log

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28373: DBRev 21.06.00.020
Jonathan Druart [Tue, 31 Aug 2021 08:15:28 +0000 (10:15 +0200)]
Bug 28373: DBRev 21.06.00.020

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28373: Add warning if custom stylesheets are defined
Nick Clemens [Mon, 30 Aug 2021 19:53:40 +0000 (19:53 +0000)]
Bug 28373: Add warning if custom stylesheets are defined

This patch adds a check of the current XSLT prefs and warns to check the new pref
if any are not set to default

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28373: Add note to XSLT prefs about the new pref
Nick Clemens [Mon, 30 Aug 2021 19:53:07 +0000 (19:53 +0000)]
Bug 28373: Add note to XSLT prefs about the new pref

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28373: (follow-up) QA fixes
Nick Clemens [Mon, 23 Aug 2021 14:12:26 +0000 (14:12 +0000)]
Bug 28373: (follow-up) QA fixes

Use fully qualified subroutine name
Don't return explicit undef

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28373: (QA follow-up) Fix typo in system preference description
Katrin Fischer [Thu, 3 Jun 2021 21:47:42 +0000 (21:47 +0000)]
Bug 28373: (QA follow-up) Fix typo in system preference description

Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 28373: (QA follow-up) Add . to end of system preference description

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28373: Add PassItemMarcToXSLT system preference
Nick Clemens [Tue, 18 May 2021 15:06:43 +0000 (15:06 +0000)]
Bug 28373: Add PassItemMarcToXSLT system preference

Default stylesheets do not reference item fields for XSLT display, however, we
spend time translating the values in the item fields.

This patch adds a system preference, PassItemMarcToXSLT. and unless enabled we remove
item fields before processing

To test:
1 - Perform some search on the staff client and opac
2 - Use the console (F12) to view the time spent on the network tab
3 - Note performance
4 - Apply patch, updatedatabase, restart_all
5 - Repeat searches
6 - Note that display has not changed
7 - Note performance, results should display slightly faster

Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28373: Unit test
Nick Clemens [Tue, 6 Jul 2021 12:32:19 +0000 (12:32 +0000)]
Bug 28373: Unit test

Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28885: Skip invalid biblios for OpacBrowseResults
Kyle M Hall [Thu, 19 Aug 2021 14:49:34 +0000 (10:49 -0400)]
Bug 28885: Skip invalid biblios for OpacBrowseResults

If a record is deleted from Koha, but is for some reason not deleted from the search indexes, OpacBrowseResults can cause an ISE if the deleted record is in the search results for any given item. OpacBrowseResults loops through the search results, and checks if there is a biblionumber, but does *not* check to see if a result was pulled from the database for that biblionumber. It simply assumes the result must exist.

We should be checking to ensure the biblionumber was valid before operating on the biblio object.

Test Plan:
1) Use zebra for searching
2) Disable koha-indexer
3) Enable OpacBrowseResults
4) Perform a search
5) Delete an item in the search results
6) View on of the remaining items in the search results
7) Note the error
8) Apply this patch
9) Restart plack
10) Reload the page
11) The error should be gone!

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: Fix the tracklink feature
Jonathan Druart [Tue, 31 Aug 2021 06:23:01 +0000 (08:23 +0200)]
Bug 22690: Fix the tracklink feature

With the FK we must set to undef/NULL, not 0.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28376: Compiled CSS
Jonathan Druart [Mon, 30 Aug 2021 16:08:26 +0000 (18:08 +0200)]
Bug 28376: Compiled CSS

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28376: Replace jQueryUI date/timepicker with Flatpickr
Owen Leonard [Thu, 20 May 2021 15:48:58 +0000 (15:48 +0000)]
Bug 28376: Replace jQueryUI date/timepicker with Flatpickr

This patch is a proof of concept demonstrating how jQueryUI date & time
pickers could be replaced using the Flatpickr library
(https://flatpickr.js.org/).

NEW: I've modified the default configuration of Flatpickr instances so
that a "Clear date" link is automatically appended. This eliminates the
need to add a button to the markup and event handling for each case.

NEW: Date/time formatting should be corrected in this revised patch.

The patch modifies three pages as test cases:
 - Circulation -> Renew (with SpecifyDueDates enabled), to demonstrate
   date and time selection.
   - NEW: You can also test the datepicker shown when you renew an
     on-hold item. This demonstrates a configuration which requires that
     the selection be after today.
 - Administration -> Patron categories -> New category, to demonstrate a
   calendar-only date picker enforcing a date after today.
 - NEW: Reports -> Patrons. The "Date of birth" fields are linked so
   that the second cannot be before the first.

I've made some customizations to the default Flatpickr library's CSS and
incorporated it into staff-global.scss, so you must rebuild the staff
client SCSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 26302: (follow-up) DBRev 21.06.00.019
Jonathan Druart [Mon, 30 Aug 2021 16:06:42 +0000 (18:06 +0200)]
Bug 26302: (follow-up) DBRev 21.06.00.019

oops

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 26302: DBRev 21.06.00.019
Jonathan Druart [Mon, 30 Aug 2021 15:08:58 +0000 (17:08 +0200)]
Bug 26302: DBRev 21.06.00.019

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 26302: (QA follow-up) Prefix prefs with OPAC
Marcel de Rooy [Mon, 30 Aug 2021 14:18:20 +0000 (14:18 +0000)]
Bug 26302: (QA follow-up) Prefix prefs with OPAC

git grep -l "ResultsMaxItems" | xargs sed -i -e "/ResultsMaxItems/ s/ResultsMaxItems/OPACResultsMaxItems/g"

And line:
koha-tmpl/opac-tmpl/bootstrap/en/xslt/MARC21slim2OPACResults.xsl:    <xsl:variable name="OPACResultsMaxItems" select="number(marc:sysprefs/marc:syspref[@name='resultsMaxItems']+0)"/>

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 26302: Make syspref's names start with uppercase
Jonathan Druart [Mon, 30 Aug 2021 13:18:40 +0000 (15:18 +0200)]
Bug 26302: Make syspref's names start with uppercase

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 26302: (QA follow-up) Prevent empty call numbers
Marcel de Rooy [Mon, 9 Aug 2021 11:55:11 +0000 (11:55 +0000)]
Bug 26302: (QA follow-up) Prevent empty call numbers

This does not make the code easier, but here we go:

Suppose resultsMaxItems == 2.
If we would normally list two call numbers like:
    Liberty (2) [Call number: PERL F 1, PERL F 2].
If one call number would be empty, we now list:
    Liberty (2) [Call number: PERL F 1, ...].
And when both are empty, we only show a number:
    Liberty (2).

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 26302: (QA follow-up) Reset preference values
Marcel de Rooy [Mon, 9 Aug 2021 09:51:36 +0000 (09:51 +0000)]
Bug 26302: (QA follow-up) Reset preference values

Mimic current behavior.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 26302: Refactor Availability block in OPAC results xslt
Marcel de Rooy [Thu, 5 Aug 2021 11:43:16 +0000 (11:43 +0000)]
Bug 26302: Refactor Availability block in OPAC results xslt

Decided finally to do a larger refactor here. Hopefully we improved
consistency and removed some redundancy. And the two new prefs provide
additional functionality.

Most significant changes:
[1] Clearer distinction of the Availability line in three parts:
    Available, Reference and Unavailable.
    For Unavailable we loop thru branches now too.
[2] Calling template to list item data (including location or ccode).
    Made the separate Location line obsolete.
[3] The tests around OPACItemLibrary are removed since we now look at
    resultbranch from XSLT.pm.
[4] Removed code replication for various 'other' statuses like Checked out.
[5] Obsoleted three xslt key indexes, singleBranchMode.
[6] Apply the two prefs to control number of listed items.

Test plan:
You may play with: OPACResultsLibrary (home/holding), OPACItemLocation
(library, callno, location, ccode), resultsMaxItems[Unavailable] (numbers),
Reference_NFL_Statuses (list of notforloan codes in reference part).

[1] Create a biblio with various items on a few branches. Fill call number,
    location and ccode too. Set home branch and holdingbranch differently.
[2] Toggle the preferences, and verify display within OAPC search results.

Example with prefs (home, callnumber, 2, 2):
Availability: Items available for loan: Centerville (2)Call number: perl A 4, PERL D 1. Items available for reference: Fairfield: Not For Loan (1)Call number: PERL A 5. Not available: Centerville: Checked out (1)Call number: PERL A 3. Centerville: Ordered (1)Call number: PERL B 1. Centerville: Staff Collection (2)Call number: PERL A 2, PERL E 1. Centerville: Withdrawn (1)Call number: PERL B 2. Fairfield: Withdrawn (1)Call number: PERL C 1.

Same data with prefs (holding, callnumber, 2, 2):
Availability: Items available for loan: Centerville (1)Call number: PERL D 1. Liberty (1)Call number: perl A 4. Items available for reference: Centerville: Not For Loan (1)Call number: PERL A 5. Not available: Centerville: Checked out (1)Call number: PERL A 3. Centerville: Staff Collection (1)Call number: PERL A 2. Centerville: Withdrawn (1)Call number: PERL B 2. Fairfield: Ordered (1)Call number: PERL B 1. Fairfield: Withdrawn (1)Call number: PERL C 1. Liberty: Staff Collection (1)Call number: PERL E 1.

Same data with prefs (holding, library, n/a, n/a):
Availability: Items available for loan: Centerville (1). Liberty (1). Items available for reference: Centerville: Not For Loan (1). Not available: Centerville: Checked out (1). Centerville: Staff Collection (1). Centerville: Withdrawn (1). Fairfield: Ordered (1). Fairfield: Withdrawn (1). Liberty: Staff Collection (1).

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 26302: Changes for substatus, resultbranch in XSLT.t
Marcel de Rooy [Thu, 5 Aug 2021 12:24:31 +0000 (12:24 +0000)]
Bug 26302: Changes for substatus, resultbranch in XSLT.t

Test plan:
Run t/db_dependent/XSLT.t

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 26302: Add resultbranch and other status in C4/XSLT
Marcel de Rooy [Thu, 5 Aug 2021 11:43:16 +0000 (11:43 +0000)]
Bug 26302: Add resultbranch and other status in C4/XSLT

Groundwork for changes in the OPAC results xslt.

NOTE: Adds both new prefs too.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 26302: Add dbrev for two new prefs
Marcel de Rooy [Thu, 24 Jun 2021 13:43:20 +0000 (13:43 +0000)]
Bug 26302: Add dbrev for two new prefs

Adding two prefs:
    resultsMaxItems
    resultsMaxItemsUnavailable

Test plan:
Check Preferences/OPAC/Appearance.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28736: fix requirements for the correct error message to show up
Petro Vashchuk [Mon, 26 Jul 2021 09:27:40 +0000 (12:27 +0300)]
Bug 28736: fix requirements for the correct error message to show up

There is existing error message in the code stating:
"Unable to understand your search query, please rephrase and try again."
which fits perfectly but because it looks for "ParseException" in the
warning output it doesn't show up on this page as it's actually
"parse_exception".

This patch makes that it's also checked if "parse_exception" is present
in the warning output.

Side note:
"ParseException" reaction code was added here:
    e0f6c4dc Bug 12478: improve error reporting a bit
Search::Elasticsearch seems propagates clean ES JSON answer,
and in current ES version inside of $@ it contains "parse_exception"
string in dumped JSON answer ("'type' => 'parse_exception'").
Old seeked phrase "ParseException" wasn't reproduced, only in ES logs
("Caused by: org.apache.lucene.queryparser.classic.ParseException:
 Cannot parse ..."). Check for both phrases won't complicate future
changes, but this note added for reference and code cleanup if needed.

To reproduce:
1) using ES search for something like "// ^ ! { } [ ] .. , <>" that
will for sure break the syntax of ES.
2) after the search query fails note that the error is
"Unable to perform your search. Please try again."
3) apply the patch
4) search for the same thing again
5) error message should be "Unable to understand your search query,
please rephrase and try again." now.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28843: Add view and edit buttons to result of MARC record import
Owen Leonard [Wed, 11 Aug 2021 12:21:19 +0000 (12:21 +0000)]
Bug 28843: Add view and edit buttons to result of MARC record import

This patch adds "View" and "Edit" buttons to the output of the result of
a MARC record import.

To test, apply the patch and go to Tools -> State MARC for import.

 - Import a file of MARC records.
 - Click the "Manage staged records" button.
 - In the table of staged records the last column labeled "Records"
   should be empty.
 - Click "Import this batch into the catalog."
 - The table of records will be shown again, and this time the last
   column should contain "View" and "Edit" buttons for each row.
 - Confirm that the buttons work correctly, opening the correct record
   for viewing and editing.

Test with both bibliographic and authority records to confirm that the
correct view and edit pages open for each.

EDIT: Add permission check for "Edit" link
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 24019: Patron batch modification based on borrowernumber
Owen Leonard [Wed, 19 May 2021 10:55:17 +0000 (10:55 +0000)]
Bug 24019: Patron batch modification based on borrowernumber

This patch adds batch patron modifications based on borrowernumber. The
user can choose to upload a file of borrowernumbers or submit a list of
borrowernumbers in a textarea, just like they can with card numbers.

To test, apply the patch and prepare files containing borrowernumbers
and card numbers. Patron lists should be enabled, and you should have at
least one patron list with patrons on it.

- Go to Tools -> Batch patron modification.
- You should see three tabs: "By card number," "By borrowernumber," and
  "By patron list."
- Test each option for batch patron modifications:
  - By card number file
  - By card number list
  - By borrowernumber file
  - By borrowernumber list
  - By patron list
- In each case the correct batch should be submitted, and modifications
  should finish correctly..
- There should be an "order of operations" for card numbers and
  borrowernumbers:
  - If a file is uploaded AND a list of numbers is entered, the list of
    numbers should be used.
- Batches should only get submitted from the active tab.
  - If you upload a file or enter card numbers in one tab and then
    switch to another tab and submit numbers from there, the original
    tab's batches should be ignored.

Signed-off-by: kelly mcelligott <kelly@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28456: Add WHERE option to membership_expiry cronjob
Nick Clemens [Tue, 25 May 2021 18:46:37 +0000 (18:46 +0000)]
Bug 28456: Add WHERE option to membership_expiry cronjob

Some libraries have a large amount of accounts and want to be able to limit how many email reminders they send.
Adding a where statement will allow for flexibility

To test:
1 - Set some borrowers to expire soon
2 - Set MembershipExpiryDaysNotice to 10
3 - perl misc/cronjobs/membership_expiry.pl -c -v -n --before 100 --after 100
4 - Note the patrons that yo uadjusted show up
5 - Limit by various patron fields, e.g.
    perl misc/cronjobs/membership_expiry.pl -c -v -n --before 100 --after 100 --where="lastseen IS NULL"
    perl misc/cronjobs/membership_expiry.pl -c -v -n --before 100 --after 100 --where="lastseen IS NOT NULL"
    perl misc/cronjobs/membership_expiry.pl -c -v -n --before 100 --after 100 --where="surname LIKE '%a%'"
    perl misc/cronjobs/membership_expiry.pl -c -v -n --before 100 --after 100 --where="surname NOT LIKE '%a%'"
6 - Confirm expected results
7 - perl misc/cronjobs/membership_expiry.pl
8 - Confirm the help message makes sense

Signed-off-by: Azucena Aguayo <azucena.aguayo@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Replace two inclue by include.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 20688: Add accesskeys for transfers
Nick Clemens [Wed, 26 May 2021 10:11:26 +0000 (10:11 +0000)]
Bug 20688: Add accesskeys for transfers

To test:
1 - Disable AutomaticItemReturn systme preference
2 - Check in an item that does not float at a branch no it's home
3 - Test new accesskeys for I,N,Y,P
4 - With transfer confirmed check the item in at a wrong branch
5 - Test accesskeys Y,P,X

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 20688: Add accesskeys to hold modals
Nick Clemens [Wed, 26 May 2021 09:57:37 +0000 (09:57 +0000)]
Bug 20688: Add accesskeys to hold modals

This patch adds accesskey elements to the hold modals during checkin

For tips on how to access the accesskeys:
https://developer.mozilla.org/en-US/docs/Web/HTML/Global_attributes/accesskey

To test:
1 - Place some holds on items
2 - Check in an item with a hold at a branch that requires transfer
3 - Use accesskey I to ignore
4 - Use accesskey Y to confirm and transfer
5 - Check in again
6 - Use accesskey Y to confirm
7 - Repeat 4-6 with a new hold but use the accesskey P to print the slip
8 - Check in the item again ans use accesskey X to cancel

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28830: Add cni index for 003
Martin Renvoize [Mon, 9 Aug 2021 11:06:30 +0000 (12:06 +0100)]
Bug 28830: Add cni index for 003

This patch adds the cni/Control-number-identifier index to enable
searches to use the 003 field.

Test plan
1/ Apply patch
2/ Re-index using updated configurations
3/ Confirm cni:number searches yield the expected results
4/ Signoff

Split-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Pasi Kallinen <pasi.kallinen@koha-suomi.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28838: add unique IDs to sco-main.tt impossible errors
Lucas Gass [Tue, 10 Aug 2021 14:18:23 +0000 (14:18 +0000)]
Bug 28838: add unique IDs to sco-main.tt impossible errors

To test:
1. Apply patch
2. Go SCO and try to checkout some items that will generate some of the
   following errors:

The system does not recognize this barcode.
You have checked out too many items and can't check out any more.
This item is checked out to someone else.
You cannot renew this item again.
This item is not for loan.
You owe the library [% DEBT | $Price %] and cannot check out.
This item has been withdrawn from the collection.
This item is restricted.
This item is on hold for another patron.
This item belongs to another branch.
Your account has expired.
Your account has been suspended.
This card has been declared lost.
Your contact information seems to be incomplete.
Due date is not valid.
Item must be checked out at a circulation desk.

3. The display should be exactly as it was without the patch but if you
   use the browsers dev tools you should be able to inscept each error
   message and see that it is now wrapped in a <span> with an ID.

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28810: replace housebould detail inputs with textarea
Lucas Gass [Tue, 3 Aug 2021 21:24:17 +0000 (21:24 +0000)]
Bug 28810: replace housebould detail inputs with textarea

To test:
1. apply patch
2. enable housebound module
3. go to a patron and look at the housebound tab
4. Edit the detials.
5. The preferred materials, subjects, authors, referral, and note inputs should be replace with much larger textareas.
6. You should now be able to added line breaks, so fill out each of the fields adding some line breaks. I added something like:
Fiction authors: Frank Herbert
Non-fiction authors: Malcolm Gladwell

7. Save changes
8. Now when you look at the housebound details those line breaks should be preserved and much easier to read.

Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28695: Add shelving location column to overdue.tt
Lucas Gass [Thu, 8 Jul 2021 20:57:58 +0000 (20:57 +0000)]
Bug 28695: Add shelving location column to overdue.tt

To test:
1. have some overdues
2. go to the overdue report on the circulation page (overdue.tt)
3. no shelving location
4. apply patch and restart the things
5. look at the overdue report again and there should be a Shelving location column
6. make sure it is accurate
7. go to table settings and make sure you can properly hide the column. test other columns in the table and make sure they are still hiding correctly as well

Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28893: Remove unused opac/rss directory
Jonathan Druart [Wed, 25 Aug 2021 08:49:30 +0000 (10:49 +0200)]
Bug 28893: Remove unused opac/rss directory

RSS feeds are now generated using opac/opac-search.pl (format=rss).

But prior to
  commit 09df0de35fcb5b1645490bd3ec9d9a77ec7923a1
  Removing obsolete RSS <link> tags and the scripts
it was using opac/opac-rss.pl, which used opac/rss

The directory should have been removed by this commit.

Test plan:
Confirm that this directory is useless and can be removed.

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28744: Better handling of undefined to_api_mapping
Tomas Cohen Arazi [Fri, 23 Jul 2021 03:39:16 +0000 (00:39 -0300)]
Bug 28744: Better handling of undefined to_api_mapping

We always had some mapping because of the DB vs. API object definition discrepancies. But bug 25260 revamps the reserves table, and it is a perfect match. It highlights this edge case: if no mapping defined, then and undef from_api_mapping is generated (as opposed to an empty hashref) and this leads to errors in the query translation from the API.

This patch makes a small change so this method always returns an empty
hashref.

To test:
1. Apply the regression tests
2. Run:
   $ kshell
  k$ prove t/db_dependent/Koha/Object.t
=> FAIL: Test fail!
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
JD amended patch: remove uneeded commented lines

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28744: Regression tests
Tomas Cohen Arazi [Fri, 23 Jul 2021 03:35:49 +0000 (00:35 -0300)]
Bug 28744: Regression tests

This patch adds tests for the following cases:
- to_api_mapping not defined
- to_api_mapping returning an empty hashref

To test:
1. Apply this patch
2. Run:
   $ kshell
  k$ prove t/db_dependent/Koha/Object.t
=> FAIL: Tests fail :-(

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
JD amended patch: remove uneeded commented lines

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28891: (bug 23916 follow up) Always use 'Checkout on' as default Checkout history...
Didier Gautheron [Mon, 23 Aug 2021 13:19:03 +0000 (15:19 +0200)]
Bug 28891: (bug 23916 follow up) Always use 'Checkout on' as default Checkout history sort column

To test:
1 - Unset RecordStaffUserOnCheckout
2 - Check out an item
3 - Display Checkout history, table is sorted by 'Checkout on' column
4 - Set RecordStaffUserOnCheckout
5 - Display Checkout history, table is sorted by 'Renewed' column
6 - Apply patch
7 - Redo 1, 3, 4 and 5, table is always sorted by 'Checkout on'

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 7703: (follow-up) Treat no items like none available
Owen Leonard [Fri, 6 Aug 2021 12:54:46 +0000 (12:54 +0000)]
Bug 7703: (follow-up) Treat no items like none available

This patch modifies the holds template so that during the
multi-hold process, titles with no items attached are treated the same
way as titles with no items available (items exist but cannot be place
don hold):

 - The row showing such a record will say "No items are available to be
    placed on hold."
 - The pickup location dropdown will be hidden.

To test, follow the previous test plan and confirm that these change are
reflected. Now that the pickup location field isn't present for titles
without items you should be able to complete the holds process.

Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 7703: (QA follow-up)
Kyle M Hall [Fri, 6 Aug 2021 11:46:12 +0000 (11:46 +0000)]
Bug 7703: (QA follow-up)

Revised test plan from Owen:

This patch modifies the hold process so that if one of the titles in a
multi-hold process has no items the process doesn't abort completely.

To test, apply the patch and perform a search in the catalog which will
return one or more records with no items attached.

 - Check checkboxes for multiple results, some of which have items and
   at least one of which has no items.
 - Click "Place hold."
 - You should be taken to the page for placing multiple holds, with a
   heading, "Cannot place hold on some items."
 - Note: You will not be able to complete the holds process without the
   next patch.

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 7703: Don't block bulk hold action on search results if some items can't be place...
Kyle M Hall [Fri, 6 Aug 2021 11:19:12 +0000 (11:19 +0000)]
Bug 7703: Don't block bulk hold action on search results if some items can't be placed on hold

If you select multiple titles on the search results page in order to
place a bulk hold and some of those titles have no items you get a
JavaScript alert warning you can some cannot be placed on hold. You are
blocked from completing the action until you deselect the invalid hold.

This is unnecessary because the bulk hold process will safely refuse to
place a hold on these titles later in the process.

This patch removes the check that prevents submitting a multi-hold if
one or more records in the multi-hold have no items.

Test plan:
1) Apply patch
2) On the staff interface, do a search
3) On the search results, select at least one record with items and one
   record with no items.
4) Click the 'Place hold' button.
5) You should be redirected to reserve/request.pl with the message
   "Cannot place hold: this record has no items attached."

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28902: Compiled CSS
Jonathan Druart [Mon, 30 Aug 2021 14:31:43 +0000 (16:31 +0200)]
Bug 28902: Compiled CSS

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28902: Grey color on label for record metadata
Fridolin Somers [Thu, 26 Aug 2021 06:31:12 +0000 (20:31 -1000)]
Bug 28902: Grey color on label for record metadata

Actually looking at a record search or details, we see a black label
(for example "Author:") and a grey metadata (for example "J.R.R Tolkien").

Seems bad for accessibility.
In my opinion the most important to see is the metadata not the label.

It is possible to change with a custom CSS but I open this report to
propose to change default display.

Test plan :
1) Apply patch and build CSS in OPAC and staff interface
2) Search for any record in OPAC/Staff interface
3) You see grey label and black metadata

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28554: Fix t/db_dependent/AuthorisedValues.t
Fridolin Somers [Wed, 4 Aug 2021 08:11:10 +0000 (22:11 -1000)]
Bug 28554: Fix t/db_dependent/AuthorisedValues.t

Fixes where sort on lib breaks the test.

Also removes useless params in search_by_koha_field()

Run prove t/db_dependent/AuthorisedValues.t

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28554: In itemsearch sort item types filter by description
Fridolin Somers [Fri, 11 Jun 2021 11:42:00 +0000 (13:42 +0200)]
Bug 28554: In itemsearch sort item types filter by description

In itemsearch form, the item types filter should be sorted by description.

Test plan :
1) Create several values and descriptions in item types
2) Go to itemsearch
3) See filter by item types sorts on description and not on value

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28554: In Koha::AuthorisedValues sort by description
Fridolin Somers [Fri, 11 Jun 2021 11:35:41 +0000 (13:35 +0200)]
Bug 28554: In Koha::AuthorisedValues sort by description

In itemsearch form, there are several filters build with authorized values.
There values should be sorted by description.

Test plan :
1) Create several values and descriptions in authorized values LOC
2) Go to itemsearch
3) See filter by location sorts on description and not on value

Seems change in search_by_marc_field can not be tested in interface

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28812: Improve robustness of selector
Jonathan Druart [Mon, 30 Aug 2021 12:43:35 +0000 (14:43 +0200)]
Bug 28812: Improve robustness of selector

Use the same fix as bug 28828.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 28812: (bug 7882 follow up) Copy all subfields in plugin editor
Didier Gautheron [Thu, 26 Aug 2021 13:27:45 +0000 (15:27 +0200)]
Bug 28812: (bug 7882 follow up) Copy all subfields in plugin editor

To test:
1- Create a notice with a 700$a and 700$d
2- Click on 700 $a field Tag Editor
3- Only 700$a is copied in search windows eg /authorities/auth_finder.pl pop up
4- Apply patch
5- Redo 2
6- 700$a is copied in 'Search main heading ($a only)' and $d is copied in 'Search main heading'

Signed-off-by: George Veranis <gveranis@dataly.gr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: Add koha_object[s]_class to fix TestBuilder.t
Jonathan Druart [Fri, 27 Aug 2021 15:06:09 +0000 (17:06 +0200)]
Bug 22690: Add koha_object[s]_class to fix TestBuilder.t

'Can't locate object method "_new_from_dbic" via package "Koha::Linktracker" (perhaps you forgot to load "Koha::Linktracker"?) at /kohadevbox/koha/Koha/Object.pm line 334.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 25619: Adjust POD and move date check before logging
Nick Clemens [Thu, 26 Aug 2021 19:07:53 +0000 (19:07 +0000)]
Bug 25619: Adjust POD and move date check before logging

Potentially we could have logged a change when no date was passed.

This patch moves the test before logging and updates POD

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 25619: Adjust POD
Jonathan Druart [Wed, 11 Aug 2021 11:17:13 +0000 (13:17 +0200)]
Bug 25619: Adjust POD

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 25619: (QA follow-up) Fix subtest description
Kyle M Hall [Thu, 22 Jul 2021 10:24:12 +0000 (06:24 -0400)]
Bug 25619: (QA follow-up) Fix subtest description

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 25619: Unit Tests
Kyle M Hall [Fri, 16 Jul 2021 18:26:37 +0000 (14:26 -0400)]
Bug 25619: Unit Tests

Signed-off-by: Abbey Holt <aholt@dubuque.lib.ia.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 25619: Add ability to adjust expiration date for waiting holds
Kyle M Hall [Fri, 16 Jul 2021 17:50:29 +0000 (13:50 -0400)]
Bug 25619: Add ability to adjust expiration date for waiting holds

There are times when an item that is waiting for pickup needs to have the expiration date extended. This would give staff the ability to modify one by one, as needed, the reserves.expirationdate for a given item awaiting pickup.

Test Plan:
1) Place a hold, trap an item for it such that is is waiting
2) Attempt to update the expiration date
3) Note the new date is not saved
4) Apply this patch, restart all the things!
5) Attempt to update the expiration date
6) The new date should be saved!

Signed-off-by: Abbey Holt <aholt@dubuque.lib.ia.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: DBRev 21.06.00.018
Jonathan Druart [Fri, 27 Aug 2021 12:39:51 +0000 (14:39 +0200)]
Bug 22690: DBRev 21.06.00.018

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: Remove uneeded return and add no_triggers
Jonathan Druart [Fri, 27 Aug 2021 12:34:00 +0000 (14:34 +0200)]
Bug 22690: Remove uneeded return and add no_triggers

* C4/Items.pm
  - Koha::Biblios not used

* Koha/Item.pm
  - Koha::Item->orders must return an empty set if no order attached
  - no_triggers should be passed to other update calls

* Item.t
  - No need to build a fund
  - Add new test to test Koha::Item->orders when no order attached

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: DBIC schema changes
Jonathan Druart [Fri, 27 Aug 2021 08:43:38 +0000 (10:43 +0200)]
Bug 22690: DBIC schema changes

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: (QA follow-up) Fix indexing for Items sets
Martin Renvoize [Thu, 5 Aug 2021 13:19:55 +0000 (14:19 +0100)]
Bug 22690: (QA follow-up) Fix indexing for Items sets

This patch adds tests and handling for calling move_to_biblio on a
Koha::Items set that contains items from more than one source biblio.

Test plan
1/ Inspect the changes to t/db_dependent/Koha/SearchEngine/Indexer.t
2/ Run t/db_dependent/Koha/SearchEngine/Indexer.t and confirm it passes

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: (QA follow-up) Correct variable name
Joonas Kylmälä [Thu, 22 Jul 2021 14:32:09 +0000 (14:32 +0000)]
Bug 22690: (QA follow-up) Correct variable name

The $from_biblio variable name doesn't exists after a refactoring that
happened. Here we need to re-index both the $self biblio and $to_biblio
biblio.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: (QA follow-up) Add TrackedLink classes and use them
Martin Renvoize [Thu, 22 Jul 2021 10:40:20 +0000 (11:40 +0100)]
Bug 22690: (QA follow-up) Add TrackedLink classes and use them

This patch adds Koha::TrackedLink(s) classes based on Koha::Object(s)
and then adds the relationship accessor to Koha::Item and uses it within
the move_to_biblio method.

Tests for new relationship also added to t/db_dependent/Koha/Item.t

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: (QA follow-up) Use relationship accessor
Martin Renvoize [Thu, 22 Jul 2021 09:57:17 +0000 (10:57 +0100)]
Bug 22690: (QA follow-up) Use relationship accessor

With the addition of foreign key relationships to the linktracker table
we now get a DBIC relationship accessor we can use. This clarifies the
code slightly by using the _result->relationship form to get the DBIC
resultset.  We should still introduce a Koha::Object based class for
this table at some point.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: (QA follow-up) Add relationships to linktracker
Martin Renvoize [Thu, 22 Jul 2021 09:37:26 +0000 (10:37 +0100)]
Bug 22690: (QA follow-up) Add relationships to linktracker

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: (QA follow-up) Clarify uses of DBIC
Martin Renvoize [Thu, 22 Jul 2021 09:25:28 +0000 (10:25 +0100)]
Bug 22690: (QA follow-up) Clarify uses of DBIC

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: (QA follow-up) Move adopt_items_from_biblios to Koha::Items
Martin Renvoize [Thu, 22 Jul 2021 09:13:42 +0000 (10:13 +0100)]
Bug 22690: (QA follow-up) Move adopt_items_from_biblios to Koha::Items

This patch moves the Koha::Biblio->adopt_items_from_biblio method to the
Koha::Items set class and updates all calls from
Biblio2->adopt_items_from_biblio(Biblio1) to Biblio->items->move_to_biblio(Biblio2)

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: (QA follow-up) Improve negation syntax
Martin Renvoize [Thu, 22 Jul 2021 09:01:32 +0000 (10:01 +0100)]
Bug 22690: (QA follow-up) Improve negation syntax

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: (QA follow-up) Rename 'item_orders' to 'orders'
Martin Renvoize [Thu, 22 Jul 2021 08:56:49 +0000 (09:56 +0100)]
Bug 22690: (QA follow-up) Rename 'item_orders' to 'orders'

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: Remove MoveItemFromBiblio import
Jonathan Druart [Mon, 19 Jul 2021 09:30:32 +0000 (11:30 +0200)]
Bug 22690: Remove MoveItemFromBiblio import

Added in the meanwhile by bug 17600.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: Add missing txn_begin in subtest
Jonathan Druart [Mon, 19 Jul 2021 09:59:10 +0000 (11:59 +0200)]
Bug 22690: Add missing txn_begin in subtest

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: (QA follow-up) Make bib-level hold object actually bib-level
Joonas Kylmälä [Fri, 28 May 2021 10:57:53 +0000 (13:57 +0300)]
Bug 22690: (QA follow-up) Make bib-level hold object actually bib-level

We need to pass undef itemnumber to build_object() to actually have a
hold without an item tied to it. Otherwise build_object() will create
automatically an item for us (thus making it an item-level hold)

To test:
 $ prove t/db_dependent/Koha/Item.t

Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: (QA follow-up) Index also source biblio when calling move_to_biblio()
Joonas Kylmälä [Tue, 25 May 2021 15:34:33 +0000 (18:34 +0300)]
Bug 22690: (QA follow-up) Index also source biblio when calling move_to_biblio()

We need to update the search index record for the old biblio where the
item was moved from to keep the item info in search index up-to-date.

To test:
1) $ prove t/db_dependent/Koha/SearchEngine/Indexer.t

Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
3 years agoBug 22690: (QA follow-up) Silence manually generated warnings
Joonas Kylmälä [Tue, 25 May 2021 15:09:30 +0000 (18:09 +0300)]
Bug 22690: (QA follow-up) Silence manually generated warnings

In our test setup we mock the index_records() to produce warnings like
this:

Koha::Item at t/db_dependent/Koha/SearchEngine/Indexer.t line
93.

By wrapping all our item creations to warnings_are{} we can silence them.

Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>