]> git.koha-community.org Git - koha.git/log
koha.git
2 years agoBug 30813: (QA follow-up) Adjust three use statements
Marcel de Rooy [Tue, 7 Jun 2022 12:44:03 +0000 (12:44 +0000)]
Bug 30813: (QA follow-up) Adjust three use statements

Altough we used the namespace when calling, the intention of
bug 17600 was that we do import the routines that we are
calling here.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30813: (follow-up) Correct C4::Breeding call
Nick Clemens [Thu, 26 May 2022 11:54:44 +0000 (11:54 +0000)]
Bug 30813: (follow-up) Correct C4::Breeding call

This patch changes the call to use the fully qualified name and
adds import to C4::Breeding, Koha::MetaSearcher, and removes import
from Koha::MetadataRecord

Additionally it replaces missing fields from the update to using TransformMarcToKoha

Lastly, it reduces the fields used when saving the bredding record to the reservoir

Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30813: (follow-up) ImportBatch updates
Nick Clemens [Fri, 20 May 2022 11:26:29 +0000 (11:26 +0000)]
Bug 30813: (follow-up) ImportBatch updates

Missed these in the original commits

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30813: Remove Koha::MetadataRecord::getKohaField
Nick Clemens [Fri, 20 May 2022 10:08:11 +0000 (10:08 +0000)]
Bug 30813: Remove Koha::MetadataRecord::getKohaField

This was essentially a wrapper around TransformKohaToMarcOneField

After changing and updating, it seems easier not to create the intermediary
object and to just transform the data

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30813: Remove TransformMarcToKohaOneField
Nick Clemens [Thu, 19 May 2022 21:39:49 +0000 (21:39 +0000)]
Bug 30813: Remove TransformMarcToKohaOneField

To test:
1 - prove -v t/db_dependent/Biblio/TransformMarcToKoha.t t/db_dependent/Breeding.t
2 - Test Z3950 search in advanced catalog editor

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30813: Adjust TransformMarcToKoha to take kohafields parameter
Nick Clemens [Thu, 19 May 2022 20:10:35 +0000 (20:10 +0000)]
Bug 30813: Adjust TransformMarcToKoha to take kohafields parameter

This adjusts the routine to accept an arrayref of koha fields to process

To test:
prove -v t/db_dependent/Biblio/TransformMarcToKoha.t t/Biblio.t

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30813: Update TransformMarcToKoha to accept a hashref
Nick Clemens [Thu, 19 May 2022 19:53:16 +0000 (19:53 +0000)]
Bug 30813: Update TransformMarcToKoha to accept a hashref

This patch updates all the calls to pass a hasref rather than an array

It also removes the no longer used framework parameter

To test:
prove -v t/Biblio.t t/db_dependent/Biblio/TransformMarcToKoha.t

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30789: Improve performance of AddBiblio
Nick Clemens [Thu, 19 May 2022 19:21:27 +0000 (19:21 +0000)]
Bug 30789: Improve performance of AddBiblio

AddBiblio calls TransformMarcRecordToKoha. We are only interested in getting biblio and biblioitems info, so we can pass 'no_items' to save some field lookups

Benchmarking saw a ~75% increase in the performance of this call

To test:
1 - Stage and import some records
2 - Confirm it works the same before and after patch
3 - Add a biblio via cataloguing, confirm it works

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30850: DBRev 22.06.00.002
Tomas Cohen Arazi [Wed, 8 Jun 2022 14:25:26 +0000 (11:25 -0300)]
Bug 30850: DBRev 22.06.00.002

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30850: (QA follow-up) Cosmetic changes to atomic update
Marcel de Rooy [Fri, 3 Jun 2022 06:23:38 +0000 (06:23 +0000)]
Bug 30850: (QA follow-up) Cosmetic changes to atomic update

No need to encode, etc.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30850: dbrev to inform existing users of the mapping change
Caroline Cyr La Rose [Thu, 2 Jun 2022 14:21:09 +0000 (10:21 -0400)]
Bug 30850: dbrev to inform existing users of the mapping change

This patch adds a message in a dbrev to inform users of existing
installations that they might want to add a mapping from 110$a to
biblio.author

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30850: Add default mapping for biblio.author to 110$a (MARC21)
Caroline Cyr La Rose [Wed, 25 May 2022 22:43:33 +0000 (18:43 -0400)]
Bug 30850: Add default mapping for biblio.author to 110$a (MARC21)

This patch adds a mapping to biblio.author in 110$a in the default framework

Note: I added lots of tests for different scenarios, I'm not sure it's necessary to test everything. I don't want this to be a deterrent! The first one is necessary, the rest are use cases.

Note 2: I don't work with ktd so maybe the steps for loading new frameworks are different, sorry about that, I honestly don't know another way to do it.

Test 1 - basic test
Before applying patch,
1- Create a new record with a corporate author (110$a)
2- Query the database, author should be null
select author from biblio where biblionumber = XXXX;

(do other control tests if you want/need before applying the patch)

3- Apply patch
4- Delete frameworks
delete from biblio_framework;
delete from marc_subfield_structure;
delete from marc_tag_structure;
5- Load new frameworks
./misc/load_yaml.pl -f installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.yml --load
6- Edit the record, don't change anything and save it
7- Query the database, author should be filled
8- Go to Administration > MARC Bibliographic framework test, everything should be OK

Test 2 - checkouts table
Before applying patch,
1- Create a new record and item with a corporate author (110$a)
2- Checkout the item for that record to a patron
Note that the author is not listed in the checkouts table
3- Apply patch
4- Delete frameworks
delete from biblio_framework;
delete from marc_subfield_structure;
delete from marc_tag_structure;
5- Load new frameworks
./misc/load_yaml.pl -f installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.yml --load
6- Edit the record, don't change anything and save it
7- Refresh the checkouts table, the author should be listed

Test 3 - notices and slips
Before applying patch,
1- Go to Tools > Notices & slips
2- Edit ISSUESLIP and add <<biblio.author>> after <<biblio.title>>
3- Save the notice
4- Create a new record and item with a corporate author (110$a)
5- Checkout the item for that record to a patron
6- Print the checkout slip
Note that the author is not listed on the slip
7- Apply patch
8- Delete frameworks
delete from biblio_framework;
delete from marc_subfield_structure;
delete from marc_tag_structure;
9- Load new frameworks
./misc/load_yaml.pl -f installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.yml --load
10- Edit the record, don't change anything and save it
11- Print the checkout slip, the author should be listed

Test 4 - labels
Before applying the patch,
1- Create a new record and item with a corporate author (110$a)
2- Go to Tools > Label Creator
3- Create a label batch with that item
4- Export the batch in PDF using the Avery 5160 template and 'Label test' layout
Note that the author is not listed
5- Apply patch
6- Delete frameworks
delete from biblio_framework;
delete from marc_subfield_structure;
delete from marc_tag_structure;
7- Load new frameworks
./misc/load_yaml.pl -f installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.yml --load
8- Edit the record, don't change anything and save it
9- Export the label batch again, the author should be listed

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30738: Log warnings for background MARC import
David Cook [Thu, 12 May 2022 04:09:58 +0000 (04:09 +0000)]
Bug 30738: Log warnings for background MARC import

This change logs warnings from the CGI background MARC import.

Test plan:
0) Apply patch
1) Export a record with an item
2) Update the 952$f subfield to "Circulation" (any value over 10 chars)
3) Import the record and try to add the item
4) The import will stay stuck with "Importing" status and 0% job
progress
5) Check the /var/log/koha/kohadev/intranet-error.log file
and notice there's an error with the following text:
"Data too long for column 'coded_location_qualifier' at row 1"

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30923: Remove EXPERIMENTAL mark on RESTOAuth2ClientCredentials
Tomas Cohen Arazi [Tue, 7 Jun 2022 19:56:34 +0000 (16:56 -0300)]
Bug 30923: Remove EXPERIMENTAL mark on RESTOAuth2ClientCredentials

The feature is not experimental at all.

To test:
1. Search for the RESTOAuth2ClientCredentials syspref
=> FAIL: It says it is an experimental feature
2. Apply this patch and reload
3. Repeat 1
=> SUCCESS: No longer marked as experimental
4. Sign off :-D

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30899: Correct dbrev 211200041
Marcel de Rooy [Tue, 7 Jun 2022 14:11:23 +0000 (14:11 +0000)]
Bug 30899: Correct dbrev 211200041

Replace DROP CONSTRAINT by DROP FOREIGN KEY.

Note: It seems that we do not need a new dbrev for master. A developer
could follow test plan below to correct if really needed.

Test plan:

NOTE: When you check show create table, verify that you see an index for category_code and a foreign key called borrower_attribute_types_ibfk_1.

[1] cp installer/data/mysql/db_revs/211200041.pl installer/data/mysql/atomicupdate/
[2] run updatedatabase; check show create table
[3] alter table borrower_attribute_types drop foreign key borrower_attribute_types_ibfk_1; alter table borrower_attribute_types drop index category_code; RUN updatedatabase again; check show create table
[4] alter table borrower_attribute_types drop foreign key borrower_attribute_types_ibfk_1; ALTER TABLE borrower_attribute_types ADD CONSTRAINT category_code_fk FOREIGN KEY (category_code) REFERENCES categories(categorycode); RUN updatedatabase again; check show create table
[5] rm installer/data/atomicupdate/211200041.pl

Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 13614: Compiled CSS
Tomas Cohen Arazi [Tue, 7 Jun 2022 12:36:31 +0000 (09:36 -0300)]
Bug 13614: Compiled CSS

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 13614: Replace usage of YUI on basket groups page
Owen Leonard [Thu, 26 May 2022 16:44:35 +0000 (16:44 +0000)]
Bug 13614: Replace usage of YUI on basket groups page

This patch updates the basket groups interface so that it doesn't rely
on YUI to move baskets in and out of groups. The patch also removes
all YUI assets and many long-obsolete references to YUI-related classes
and IDs.

To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client)

- Go to Acquisitions.
- Locate a vendor with multiple closed baskets.
- Click "Basket groups" in the sidebar menu.
- Create or edit a basket group.
- On the basket group page you should see the basket group form in one
  column and ungrouped baskets in another.
- Both grouped and ungrouped baskets should be in a sortable
  DataTable.
- Test that when you click the "Add to group" button on an ungrouped
  basket the row is removed from the table of ungrouped baskets and
  added to the table of grouped baskets.
  - The button text on the row should now read "Remove."
- Test the reverse operation: Clicking "Remove" on a grouped basket
  should move it to the table of ungrouped baskets.
- Test that when all baskets are moved out of either of the tables a row
  is displayed with a message specific to that table, e.g. "There are no
  ungrouped baskets."
- Test that the basket group saves correctly when zero or more baskets
  are added to the group.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30877: use List::MoreUtils::uniq from recalls_to_pull.pl
Jonathan Druart [Wed, 1 Jun 2022 12:04:47 +0000 (14:04 +0200)]
Bug 30877: use List::MoreUtils::uniq from recalls_to_pull.pl

Test plan:
Confirm that "Recalls to pull" is still working correctly

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30539: (bug 24161 follow-up) Fix typo in DBrev
Jonathan Druart [Tue, 31 May 2022 05:58:59 +0000 (07:58 +0200)]
Bug 30539: (bug 24161 follow-up) Fix typo in DBrev

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30057: Move virtualshelf-related exceptions to a separate library
Tomas Cohen Arazi [Wed, 9 Feb 2022 13:05:12 +0000 (10:05 -0300)]
Bug 30057: Move virtualshelf-related exceptions to a separate library

This patch moves the not-generic virtualshelf-related exceptions to
their own file. Callers are adjusted as required.

To test:
1. Run:
   $ kshell
  k$ prove t/db_dependent/Virtualshelves.t
=> SUCCESS: Tests pass
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass
4. Check virtualshelves work as expected
5. Sign off :-D

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30891: (QA follow-up) Add check to patron details page
Katrin Fischer [Mon, 6 Jun 2022 11:16:33 +0000 (13:16 +0200)]
Bug 30891: (QA follow-up) Add check to patron details page

Adds a similar check to the patron details shown when selecting
the details tab in the patron account in the staff interface.

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30891: SMS provider shows on staff side even if SMS::Send driver is not set to...
Kyle M Hall [Thu, 2 Jun 2022 14:23:08 +0000 (10:23 -0400)]
Bug 30891: SMS provider shows on staff side even if SMS::Send driver is not set to "Email"

It appears that in my original submission ( Bug 9021 ),
I hid the SMS provider selector unless the SMS::Send
driver was set to "Email", but only on the OPAC,
not on the staff interface!

Test Plan:
1) Set SMSSendDriver to anything except "Email"
2) Note the SMS Provider pulldown shows in the patron editor
3) Apply this patch
4) Reload the page, SMS Provider id should now be gone
5) Set SMSSendDriver to "Email"
6) Reload the page, SMS Provider should now be shown

Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 29607: Store the discount amount correctly when importing and order from a file
Christophe TORIN [Wed, 1 Jun 2022 12:14:38 +0000 (14:14 +0200)]
Bug 29607: Store the discount amount correctly when importing and order from a file

This bug fixes how the discount amount for an order is stored, when an order is added to a basket using "From staged MARC records".

Test plan:
1. Export a record (without the items) (Tools > Catalog > Export data).
2. Delete the record from the catalog (including any items).
3. Stage the record for import (Tools > Catalog > Stage MARC records for import).
4. Create a new vendor with a discount of 25%. (Or select and existing vendor that has a discount). (Acquisitions > New vendor)
5. Create a new basket for the vendor. (Acquisitions > Manage orders > search for vendors > New > Basket).
6. Add to the basket using "From a staged file":
   . select "Add orders" next to the staged file
   . select the record to add to the order
   . enter a price
   . leave the discount field blank
   . select a fund
   . select "Save"
   ==> The order is created!
7. Modify the order - note that the discount is showing on the form as .25% instead of 25%, also note that the discount amount is calculated correctly.
8. Check what is recorded in the database:
   . koha-mysql kohadev
   . select * from aqorders;
   ==> discount field for the basket item shows as 0.2500
9. Change the discount to 25%. Run step 8 again - discount amount will be correctly shown as 25.0000
10. Apply the patch.
11. Repeat steps 1-9 - discount amount is shown and calculated correctly.
12. Test modifying the discount amount - should be calculated and shown correctly.
13. Sign off!

See additional comments in the bug description.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 29871: Remove marcflavour param in Koha::Biblio->get_marc_notes
Fridolin Somers [Thu, 13 Jan 2022 07:05:29 +0000 (21:05 -1000)]
Bug 29871: Remove marcflavour param in Koha::Biblio->get_marc_notes

Test plan :
Display a biblio record with some MARC notes in details page and basket,
OPAC and staff
Run prove t/db_dependent/Koha/Biblio.t

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30388: Fix some errors in the template for ordering from a MARC file
Owen Leonard [Mon, 28 Mar 2022 17:28:50 +0000 (17:28 +0000)]
Bug 30388: Fix some errors in the template for ordering from a MARC file

This patch fixes a few markup errors in the addorder2709 template. The
modal dialog markup is corrected and moved out of the loop of records so
that it doesn't create repeating id attributes. Obsolete CSS is removed,
fixing the width of the MARC preview modal.

The calendar include is added, fixing a Flatpickr error in the console.

Double ID attributes are removed from the Statistics 1 and Statistics 2
fields.

To test, apply the patch and test the process of adding an order to a
basket from a staged MARC file. Test in particular:

 - The MARC and Card previews
 - The "Date acquired" field under the "Item information" tab should
   trigger a Flatpickr widget.

Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30384: (follow-up) Add markup comments
Owen Leonard [Mon, 28 Mar 2022 14:38:51 +0000 (14:38 +0000)]
Bug 30384: (follow-up) Add markup comments

This patch adds comments to the template to highlight the markup
structure.

This patch should have no effect on the page's appearance or
functionality.

Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30384: Reindent template for ordering from a MARC file
Owen Leonard [Mon, 28 Mar 2022 14:11:19 +0000 (14:11 +0000)]
Bug 30384: Reindent template for ordering from a MARC file

This patch updates the template for ordering from a MARC file so that
the indentation is consistent.

This patch does not fix a couple of bugs which will be fixed in a later
patch: The MARC modal window has the wrong width, and there is a
Flatpickr error in the console.

To test apply the patch and go to Acquisitions -> Vendor -> Basket ->
Add to basket -> From a staged file.

- Click "Add orders" next to the staged file you want to use.
- On the "Add orders" page, test that everything still works correctly:
- Tabs work correctly
- JavaScript controls (select all, show inactive, etc.) work
- MARC and Card previews work
- Adding orders works

Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30026: Quick fix for SmsAlert Hint
Florian Bontemps [Fri, 4 Mar 2022 14:49:19 +0000 (14:49 +0000)]
Bug 30026: Quick fix for SmsAlert Hint

Just modifying the hint provided in patrons' messaging preferences to
allow either + or 00 for international formats.
No test plan needed.

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30026: SMSAlert regex fixed for international
Florian Bontemps [Fri, 4 Feb 2022 15:40:33 +0000 (15:40 +0000)]
Bug 30026: SMSAlert regex fixed for international

When registering a phone number for SMS alerts, the number goes through
a regex filter to make sure the number is valid. One of the formats used
in Europe is 00 AAA XXXXXXXXX (A = country indicator) and it is not
supported.

This patch adjusts the regex to either accept 00 AAA XXXXXXXXX or
+AAAXXXXXXXXX in this case. (Note : +AAA and 00AAA are mutually exclusive).

To test:
1) You need to have installed a SMSAlert plugin. Make sure the
   SMSSendDriver syspref is also set up with your SMS plugin of choice.
2) Pick a patron and edit its profile.
3) In the messaging preferences fieldset, under SMS number, enter any
   number with the format 00 AAA XXXXXXXXX (ie : 00111123456789).
   Try to save the modification : you should have an error message.
4) Try instead a number with the format +AAAXXXXXXXXX (ie :
   111123456789), that one should be accepted.
5) Save your modification then check that the number has been changed.
6) Apply patch.
7) Repeat step 3 to 5.
8) Observe the error is gone.
9) Try it once more with the format +00 AAA XXXXXXXXX (+00111123456789),
   that format should not be accepted: this is intentional.
10) Sign off.

Thanks-to: Didier Gautheron <didier.gautheron@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30713: Patron entry should limit date of birth selection to dates in the past
Owen Leonard [Fri, 6 May 2022 15:21:43 +0000 (15:21 +0000)]
Bug 30713: Patron entry should limit date of birth selection to dates in the past

This patch adds to the configuration of the date of birth field in the
patron entry form so that the calendar widget prohibits the selection of
a date in the future.

To test, apply the patch and open a patron record for editing. Try to
select a birth date in the future using the calendar widget. You should
be limited to a selection of today or before.

Confirm that clicking the "Yesterday" and "Today" shortcuts in the
calendar widget works correctly.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30864: Add validation to password_expiry_days
Jonathan Druart [Wed, 1 Jun 2022 12:29:59 +0000 (14:29 +0200)]
Bug 30864: Add validation to password_expiry_days

When creating a patron category or editing an existing one, there is no validation for the "Password expiration" field.

If letters or other characters are entered, there is no error message and if not a number whatever is entered is not saved.

To test:
1. Go to Administration > Patrons and circulation > Patron categories.
2. Add a new patron category (or edit an existing category).
3. For the "Password expiration" field, enter letters or characters such as L$%.
=> Note that you are prompted to "Please enter only digits"

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 29260: 210a is reported to Autor (meeting/conference) when upgrading an authority...
Marion Durand [Fri, 10 Sep 2021 14:25:34 +0000 (16:25 +0200)]
Bug 29260: 210a is reported to Autor (meeting/conference) when upgrading an authority through Z3950

When upgrading an authority with Z39.50, the field 2XX is sent into the
research grid.

The field 210a is sent into the search field "Author
(meeting/conference)". Or a collective authority is more often a
corporation than and meeting so librarian has to copy and paste this
data. (In unimarc field 210a is used both for corporation and meeting.)

This patch makes 210a field be sent into the search field "Author
(corporate)" instead of the "Author (meeting/conference)" one.

1- Find an authority with collectivity type (with a field 210a).
2- Click on "Edit" then on "Edit record"
3- Click on "Replace record via Z39.50/SRU search"
4- See that the field 210 is reported in the search grid in "Author
(meeting/conference)" field
5- Apply the patch
6- Go throug step 1 to 3 again
7- See that the field 210 is now reported in the search grid in "Author
(corporate)" field

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30778: Remove ModAuthInBatch
Nick Clemens [Mon, 16 May 2022 19:51:41 +0000 (19:51 +0000)]
Bug 30778: Remove ModAuthInBatch

1 - git grep ModAuthInBatch
2 - Confirm none of these occurences are calls
3 - Apply patch
4 - git grep ModAuthInBatch
5 - No occurences

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30778: Remove ModBiblioInBatch
Nick Clemens [Mon, 16 May 2022 19:50:20 +0000 (19:50 +0000)]
Bug 30778: Remove ModBiblioInBatch

To test:
1 - git grep ModBiblioInBatch
2 - Confirm these occurences are not calls
3 - Apply patch
4 - git grep ModBiblioInBatch
5 - No occurences

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30636: Show notforloan availability correctly in ILS-DI
David Cook [Thu, 28 Apr 2022 05:48:33 +0000 (05:48 +0000)]
Bug 30636: Show notforloan availability correctly in ILS-DI

This patch adds the Koha::Item->is_notforloan() method which checks
the item status of "notforloan" and it checks the effective item type
to see if it's marked as "notforloan". This change brings ILS-DI in line
with the catalogue which displays "Not for loan" for both those scenarios.

0. Don't apply patch yet
1. Enable ILS-DI system preference
http://localhost:8081/cgi-bin/koha/admin/preferences.pl?op=search&searchfield=ILS-DI
2. Change Item types to "Not for Loan" for Books
http://localhost:8081/cgi-bin/koha/admin/itemtypes.pl?op=add_form&itemtype=BK
3. Note that book is listed as "Not for loan" in catalogue
http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=29&searchid=scs_1651115075364
4. Note that book is listed as "available" via ILS-DI
http://localhost:8080/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=29&id_type=bib

5. Apply patch and restart starman (ie koha-plack --restart kohadev)

6. Note that book is listed as "not available" and "Not for loan" via ILS-DI
http://localhost:8080/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=29&id_type=bib

--

7. prove t/db_dependent/Koha/Item.t

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30844: The OPAC detail page's browser is limited to the current page of results...
Kevin Carnes [Wed, 25 May 2022 10:54:25 +0000 (10:54 +0000)]
Bug 30844: The OPAC detail page's browser is limited to the current page of results when using Elasticsearch

When viewing the detail page of the first or last record of a result page,
it's not possible to browse to another page when using Elasticsearch.

To test:
1) Search for "*" in the OPAC
2) Click on the last result of the page
3) Observe that you cannot browse to the next page
4) Apply the patch
5) Search for "*" in the OPAC
6) Click on the last result of the page
7) Observe that you can browse to the next page
8) Sign off

Sponsored-by: Lund University Library
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30726: Fix "yesterday" when limited to past dates
Jonathan Druart [Wed, 1 Jun 2022 12:36:52 +0000 (14:36 +0200)]
Bug 30726: Fix "yesterday" when limited to past dates

Test plan:
Go to "Patrons with no checkouts" report, /cgi-bin/koha/reports/borrowers_out.pl
Select "Yesterday"
=> it automatically selects the previous day's date and populates the form field

Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30746: Fix JS error on opac-memberentry
Jonathan Druart [Wed, 1 Jun 2022 12:54:34 +0000 (14:54 +0200)]
Bug 30746: Fix JS error on opac-memberentry

Empty PatronSelfRegistrationBorrowerMandatoryField and PatronSelfRegistrationBorrowerUnwantedField
Go to opac-memberentry.pl
Notice the JS error
  Uncaught TypeError: j is undefined
Apply this patch
Go to opac-memberentry.pl
=> no JS error
Fill the pref with some values
Go to opac-memberentry.pl
=> Confirm that the fields you marked as mandatory as flagged accordinly
on the UI

Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 23659: DBRev 22.06.00.001
Tomas Cohen Arazi [Mon, 6 Jun 2022 14:43:41 +0000 (11:43 -0300)]
Bug 23659: DBRev 22.06.00.001

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 23659: (follow-up) Correct syspref.sql to match atomicupdate
Nick Clemens [Mon, 23 May 2022 12:59:03 +0000 (12:59 +0000)]
Bug 23659: (follow-up) Correct syspref.sql to match atomicupdate

Missed updating this file when I added another option and renamed another

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 23659: Add DefaultHoldPickupLocation system preference
Nick Clemens [Wed, 18 May 2022 14:21:35 +0000 (14:21 +0000)]
Bug 23659: Add DefaultHoldPickupLocation system preference

On the staff side behaviour differs for default pickup location when placing a hold or
placing an overridden hold. Additionally, the behaviour has changed betwee master and stables

We should provide a consistent default, and allow the library to specify their choice

Note this only affects staff client as there is only a single dropdown on OPAC and it is not
tied to items

To test:
 1 - Apply patch
 2 - Update database
 3 - Find a record with items from various branches, and at least one with a different home/holding branch
 4 - Ensure there is an item that requires override to hold, and  AllowHoldPolicyOverride  is enabled
 4 - Attempt to place hold
 5 - Confirm all dropdowns default to logged in library
 6 - Set DefaultHoldPickupLocation to item's home branch
 7 - Refresh and confirm all dropdowns match item home library except biblio level hold - still logged in library
 8 - Set DefaultHoldPickupLocation to item's holding branch
 9 - Refresh and confirm defaults
10 - Mark one of the items holding library as 'not a pickup location' in Admin->Libraries
11 - Refresh and confirm dropdown is now empty for that item

Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30893: Fix documentation in update_patrons_category.pl
Nick Clemens [Fri, 3 Jun 2022 11:35:34 +0000 (11:35 +0000)]
Bug 30893: Fix documentation in update_patrons_category.pl

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30868: (bug 29684 follow-up) Fix borrowernumber var in template
Jonathan Druart [Tue, 31 May 2022 06:23:30 +0000 (08:23 +0200)]
Bug 30868: (bug 29684 follow-up) Fix borrowernumber var in template

borrower_data does not contain the borrowernumber, it is sent
separately.

Test plan:
1. Edit a patron record (for example: Henry Acevedo).
2. Note that the URL is http://127.0.0.1:8081/cgi-bin/koha/members/memberentry.pl?op=modify&destination=circ&borrowernumber=19
3. Change date of birth to yesterday.
4. Save.
5. Error message displayed above the Save and Cancel buttons:
   The following fields are wrong. Please fix them.
   - Patron's age is incorrect for their category. Ages allowed are 18-999.
6. Note that the URL is now http://127.0.0.1:8081/cgi-bin/koha/members/memberentry.pl
7. Fix date of birth (for example: change year to 2000).
8. Select Save.
=> Without this patch you get: "Patron not found. Return to search."
=> With this patch applied the patron's data is saved

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30884: Fix jQuery selector to correctly detect active tab
Slava Shishkin [Fri, 3 Jun 2022 14:47:46 +0000 (17:47 +0300)]
Bug 30884: Fix jQuery selector to correctly detect active tab

To reproduce:
1. Go to /tools/modborrowers.pl and fill form Card number list with data and click Continue.
2. It should give "No patron card numbers or borrowernumbers given." warning.
3. Using the browser inspector tool see that post fields cardnumberlist or borrowernumberlist
   is sent with empty data.

Apply the patch, and then:
1. Fill form Card number or Borrowernumber list and click Continue.
2. Get the result: table with patrons for editing or warning about not found number.
3. Using the inspector tool see that request has data from the active tab in the form.

Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30886: Show pending recall on item on OPAC
Aleisha Amohia [Thu, 2 Jun 2022 22:59:56 +0000 (22:59 +0000)]
Bug 30886: Show pending recall on item on OPAC

The 'completed' flag was causing the wrong status to be shown, but we
can also give a more useful message to the patron.

To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place a recall on that item.
5) Go back to the staff client and check the item in. Confirm the recall
as waiting for Patron A.
6) Go back to the OPAC record page and look at the holdings table.
Notice the status still says the item is Available.
7) Apply patch, restart services, refresh the OPAC.
8) Confirm the holdings table status now says the item has a pending
recall.

Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30892: (bug 30742 follow-up) Send single bib as a holdable bib
Nick Clemens [Thu, 2 Jun 2022 17:24:21 +0000 (17:24 +0000)]
Bug 30892: (bug 30742 follow-up) Send single bib as a holdable bib

To test:
1. Try placing hold
2. Everything seems to work but no hold gets placed.
3. Apply patch
4. Verify holds are no placed correctly.

Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30885: Display recall data correctly
Aleisha Amohia [Thu, 2 Jun 2022 21:23:55 +0000 (21:23 +0000)]
Bug 30885: Display recall data correctly

This page does not pull the recall columns correctly.

To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place an item-level recall on that item.
5) Go back to the staff interface and search for the item. Confirm that when you go
to the record detail page, it explodes and errors are shown.
6) Apply patch and refresh page.
7) Confirm page loads as expected.
8) Check the Status information for the item in the Holdings table.
Confirm it shows the recall information correctly.
9) Check in the item and confirm the recall as waiting for Patron A.
10) Go back to the record detail page and confirm the Status information
for the item shows as Waiting in the Holdings table.

Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30876: (follow-up) Use the $biblio object even further
Tomas Cohen Arazi [Wed, 1 Jun 2022 13:12:05 +0000 (10:12 -0300)]
Bug 30876: (follow-up) Use the $biblio object even further

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30876: Use Koha::Biblio
Jonathan Druart [Wed, 1 Jun 2022 11:59:09 +0000 (13:59 +0200)]
Bug 30876: Use Koha::Biblio

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30876: Fix wrong call to ->search in list context
Tomas Cohen Arazi [Wed, 1 Jun 2022 11:16:00 +0000 (08:16 -0300)]
Bug 30876: Fix wrong call to ->search in list context

The code is clearly incorrect as ->search no longer returns a list when
called in list context.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30756: (follow-up) Restore MARC21 authority file
Tomas Cohen Arazi [Sun, 5 Jun 2022 23:24:03 +0000 (20:24 -0300)]
Bug 30756: (follow-up) Restore MARC21 authority file

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30840: Add support for barcode filters to course reserves
Nick Clemens [Tue, 24 May 2022 18:27:30 +0000 (18:27 +0000)]
Bug 30840: Add support for barcode filters to course reserves

This bug adds support for barcode filters on the inputs in the course reserves module.

To test:
1 - Set itemBarcodeInputFilter to 'Remove spaces from'
2 - Find a barcode in your system and add spaces between each characters
    e.g. 3 9 9 9 9 0 0 0 0 0 0 8 1 8
3 - Past that barcode into the checkin box, success
4 - Browse to course reserves, ensure you have a course or create on
5 - Test adding a reserve, batch adding a reserve, and batch removing reserves
6 - The pasted barcode does not in any
7 - Apply patch and restart
8 - Pasted barcode with spaces can now successfuly be added, batch added, and batch removed from courses

Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 29961: Make horizontal scroll bar always visible on acqui/z3950_search.pl
Lucas Gass [Thu, 27 Jan 2022 16:55:34 +0000 (16:55 +0000)]
Bug 29961: Make horizontal scroll bar always visible on acqui/z3950_search.pl

To test:
1. In Acquisitions make a basket and add something "From an external source"
2. Search for a title and click on the 'MARC' button, make sure the MARC prview is both tall and wide.
3. You will not see the horizontal scroll bar unless you scroll all the way to the bottom of the preview.
4. Apply patch.
5. Try steps 1 & 2 again, this time you should see the horizontal scroll bar as soon as the MARC prveiw loads.

Note: I put the CSS on multiple lines for better readability

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30756: Rename to Koha_MetadataRecord_Authority
Marcel de Rooy [Sat, 14 May 2022 12:29:25 +0000 (12:29 +0000)]
Bug 30756: Rename to Koha_MetadataRecord_Authority

What we are actually testing here.

No test plan.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
JD amended patch: remove Dumper

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30756: Further adjustments to Koha_Authority.t
Marcel de Rooy [Sat, 14 May 2022 12:07:17 +0000 (12:07 +0000)]
Bug 30756: Further adjustments to Koha_Authority.t

Remove use of exported_records file in favor of TestBuilder.
Remove conditional tests with SKIP block. Create reservoir record.

Test plan:
Run t/db_dependent/Koha_Authority.t

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30756: Ground work for improving Koha_Authority.t
Marcel de Rooy [Sat, 14 May 2022 07:42:42 +0000 (07:42 +0000)]
Bug 30756: Ground work for improving Koha_Authority.t

Move stuff into two subtests.

Test plan:
Run t/db_dependent/Koha_Authority.t.
If you have no imported auths, you will still see skips.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30855: (follow-up) Rewrite tests using Basic authentication
Tomas Cohen Arazi [Thu, 26 May 2022 14:35:41 +0000 (11:35 -0300)]
Bug 30855: (follow-up) Rewrite tests using Basic authentication

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30855: Rename /import => /import_batches
Tomas Cohen Arazi [Thu, 26 May 2022 14:17:18 +0000 (11:17 -0300)]
Bug 30855: Rename /import => /import_batches

This patch renames the route to make it consistent for future additions.

To test:
1. Run
   $ git grep 'matches/chosen'
=> FAIL: all occurences use /api/v1/import/
2. Apply this patch
3. Run:
   $ git grep 'matches/chosen'
=> SUCCESS: All occurences have '/api/v1/import_batches/'
4. Run:
   $ kshell
  k$ prove t/db_dependent/api/v1/import_record_matches.t
=> SUCCESS: Tests pass!
5. Sign off :-D

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 27697: Only preopulate search when we have found a single biblio
Nick Clemens [Wed, 18 May 2022 15:08:39 +0000 (15:08 +0000)]
Bug 27697: Only preopulate search when we have found a single biblio

This patch uses the url parameter we created in 23475 to determine whether
we should populate the search bar or not

Note - a bookmark with this param will still populate search term with last search

To test:
1 - Search staff client for 'cat'
2 - Browse to a patrons checkouts and click on a title, or just go directly to a details page:
    http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=2850
3 - Search bar says 'cat'
4 - Apply patch
5 - Repeat 1-2
6 - Search bar is not populated
7 - Search "dalek war box set" or a term that finds a single record in your instance
8 - Search bar is populated
9 - Note url like: http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=2850&found1=1

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30781: Fix warning in GetPreparedLetter
Fridolin Somers [Thu, 19 May 2022 03:50:13 +0000 (17:50 -1000)]
Bug 30781: Fix warning in GetPreparedLetter

Test by running :
  prove t/db_dependent/Letters.t
Check you dont see warning :
  Use of uninitialized value $val in substitution iterator

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30781: Add unit test for substitute with undefined value
Fridolin Somers [Thu, 19 May 2022 03:47:18 +0000 (17:47 -1000)]
Bug 30781: Add unit test for substitute with undefined value

Add unit test that generates warn.
This may be usefull as no regression test.

Run prove t/db_dependent/Letters.t
You see warn :
t/db_dependent/Letters.t .. 1/84 Use of uninitialized value $val in substitution iterator at /kohadevbox/koha/C4/Letters.pm line 607.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30337: Holds to Pull ( pendingreserves.pl ) ignores holds if priority 1 hold...
Kyle Hall [Tue, 22 Mar 2022 18:14:52 +0000 (14:14 -0400)]
Bug 30337: Holds to Pull ( pendingreserves.pl ) ignores holds if priority 1 hold is suspended

Holds to Pull ( pendingreserves.pl ) ignores holds if priority 1 hold is suspended,
and shows the wrong number of "patrons with holds" which presumably tells the
librarian how many copies to pull from the shelves.

Test Plan:
1) Create a record with one or more holdable items
2) Place two holds on the record
3) Note they show in the holds to pull report
4) Suspend the priority 2 hold
5) Note the report continues showing that 2 patrons have holds
6) Resume the priority 2 hold
7) Suspend the priority 1 hold
8) Note the hold disappears from the holds to pull report
9) Apply this patch
10) Restart all the things!
11) Reload the holds to pull report
12) The report should show one hold that needs an item pulled to fill it!

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30523: Quiet console warning about missing shortcut-buttons map file
Owen Leonard [Wed, 13 Apr 2022 12:18:13 +0000 (12:18 +0000)]
Bug 30523: Quiet console warning about missing shortcut-buttons map file

This patch updates the Flatpickr plugin shortcut-buttons which adds the
"Yesterday," "Today," and "Tomorrow" links to Flatpickr widgets.  This
updates it to the latest version, 0.4.0.

The file is modified in two ways: The version information is added to
the top of the file, and the sourceMappingURL line is removed from the
bottom. This quiets browser console warnings about a missing map file.

To test:
- apply the patch and clear your browser cache.
- Go to Circulation -> Check out and check out to a patron.
- Click "Checkout settings" and click the "Specify due date" field.
- In the pop-up calendar, test all controls, including the shortcut
  links, to confirm that everything works as before.
- In the browser console there should be no warning related to
  shortcut-buttons-flatpickr. (Firefox didn't have the warning, Chromium
  can be used.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 28723: Replace "No title" by an empty string
Julian Maurice [Tue, 31 May 2022 09:36:37 +0000 (11:36 +0200)]
Bug 28723: Replace "No title" by an empty string

This is to be consistent with what is done in checkouts.js

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 28723: Fix holds table display when a biblio has no title
Julian Maurice [Tue, 20 Jul 2021 12:45:35 +0000 (14:45 +0200)]
Bug 28723: Fix holds table display when a biblio has no title

Test plan:
1. Create a biblio without title, then create an item for this biblio.
2. Place a hold on it.
3. Go to the patron detail page and click on the Holds tab
4. Confirm that holds are correctly displayed

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30629: fix <span> in title of some pages
Victor Grousset/tuxayo [Fri, 13 May 2022 19:25:53 +0000 (21:25 +0200)]
Bug 30629: fix <span> in title of some pages

== Test plan ==
1. Go to http://localhost:8081/cgi-bin/koha/patroncards/manage.pl?card_element=layout
2. See that the page title in your browser window title is wrong because it contains <span>
3. Go to http://localhost:8081/cgi-bin/koha/labels/label-manage.pl?label_element=batch
4. See that the page title in your browser window title is wrong because it contains <span>
5. Go to http://localhost:8081/cgi-bin/koha/admin/aqbudgetperiods.pl
6. Administration => Budgets => Click on a budget => planning => plan by months
7. See that the page title in your browser window title is wrong because it contains <span>
8. Refresh the pages and see that the titles are correct
9. Sign off :)

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 28529: Make biblio-level hold itemtype count against max rules
Tomas Cohen Arazi [Wed, 1 Sep 2021 21:00:59 +0000 (18:00 -0300)]
Bug 28529: Make biblio-level hold itemtype count against max rules

The current situation is that biblio-level holds can be assigned an item
type, so they can only be fulfilled by items matching that specified
item type (be it item-level itype or the fallback to biblio-level).

But there's the situation in which max holds limits for a specific item
type can be overridden by using biblio-level holds with item type
selection (AllowHoldItemTypeSelection) enabled.

To test:
1. Have a patron of category 'Staff' (S)
2. Have 3 records with items with the 'BK' item type, and maybe others
3. Enable AllowHoldItemTypeSelection
4. Set a limit of 2 max holds for that category+item type
5. In the OPAC. Place bibio-level holds, with item type contraint to 'BK' on those 3 records
=> FAIL: You can place the 3 holds
6. Cancel the holds
7. Apply this patch and restart all
8. Repeat 5
=> SUCCESS: You can only place 2 holds
9. Run:
   $ kshell t/db_dependent/Reserves.t
=> SUCCESS: Tests pass!
10. Sign off :-D

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 28529: Regression tests
Tomas Cohen Arazi [Fri, 3 Sep 2021 19:47:14 +0000 (16:47 -0300)]
Bug 28529: Regression tests

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30731: Remove Readonly::XS::MAGIC_COOKIE
Marcel de Rooy [Thu, 12 May 2022 07:05:50 +0000 (07:05 +0000)]
Bug 30731: Remove Readonly::XS::MAGIC_COOKIE

This variable does not make sense anymore, since the Readonly::XS
module is not listed in the cpanfile. So it will not be required
the versions_info loop.

Test plan:
Run t/Installer_PerlModules.t again.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30731: Silence noisy CPAN modules in C4::Installer::PerlModules
Marcel de Rooy [Wed, 11 May 2022 14:26:06 +0000 (14:26 +0000)]
Bug 30731: Silence noisy CPAN modules in C4::Installer::PerlModules

Main change is replacing 'no warnings' by local $SIG{__WARN__}.

The modules are sorted now too. This will make results of requiring
them one after the other a more predictable experience and improves
the output of koha_perl_deps.

Test plan:
Run about. Check plack intranet log.
Run koha_perl_deps.pl -a

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30731: Unit tests
Marcel de Rooy [Wed, 11 May 2022 14:35:18 +0000 (14:35 +0000)]
Bug 30731: Unit tests

Installer_pm.t can safely be discarded, having Installer_PerlModules.t.

Note: Without the second patch, the test about versions_info being silent
might fail. With the second patch, it should pass.
Note that since the order of requiring the cpan modules varies (without
the second patch), the results (potential warnings) vary too.

Test plan:
Run t/Installer_PerlModules.t

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30842: 2FA - Allow at least one old TOTP
Jonathan Druart [Wed, 25 May 2022 08:04:58 +0000 (10:04 +0200)]
Bug 30842: 2FA - Allow at least one old TOTP

We allow one old token when we are setting the two-factor auth, we
should reuse the same settings when validation the authentication
itself.

Test plan:
Setup 2FA for your logged-in user
Logout/Login
Have a look at the code and wait for 30 sec before using it (< 1min
however)

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30786: Fix capitalization in advanced search system preferences
David Nind [Wed, 18 May 2022 02:21:14 +0000 (02:21 +0000)]
Bug 30786: Fix capitalization in advanced search system preferences

This fixes the capitalization in the descriptions for the
AdvancedSearchTypes and OpacAdvancedSearchTypes system preferences.

Test plan:
1. In the staff interface, search the system preferences for
   'AdvancedSearch'.
2. Review the current descriptions for the AdvancedSearchTypes and
   OpacAdvancedSearchTypes system preferences.
3. Note that "..Shelving Location.." is used instead of "..Shelving
   location..".
4. Apply the patch.
5. Refresh the page.
6. Sentence case is now used for "Shelving location" in the
   descriptions (as per coding guideline HTML4: Upper and lower cases
   in strings).
7. Sign off.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30788: Unit test
Katrin Fischer [Fri, 20 May 2022 08:05:43 +0000 (08:05 +0000)]
Bug 30788: Unit test

Run:
  prove t/db_dependent/Circulation/CalcFine.t

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30788: Fix warning in Overdues.pm when fine is empty in circ rules
Katrin Fischer [Fri, 20 May 2022 07:43:15 +0000 (09:43 +0200)]
Bug 30788: Fix warning in Overdues.pm when fine is empty in circ rules

Argument "" isn't numeric in multiplication (*) at /usr/share/koha/lib/C4/Overdues.pm

To test:
* Create a issuing rule where fine is empty, but a fine interval is set.
  Fine amount: empty
  To do this, remove the 0 displayed in the input field before saving.
  Fine charging interval: 5 or any other numeric value
  When to charge: Start of interval
  Fine grace period: 0
* Check out an item with the due date yester (use specify due date)
* Run misc/cronjobs/fines.pl -v
* You should see above warn in the output
* Apply patch
* Rerun fines.pl, there should be no warn.
* Run:
  t/db_dependent/Circulation/CalcFine.t
  t/db_dependent/Fines.t
  t/db_dependent/Circulation.t
  t/db_dependent/Overdues.t

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30828: Remove useless 'type' parameter in placerequest.pl
Joonas Kylmälä [Sat, 21 May 2022 19:23:32 +0000 (19:23 +0000)]
Bug 30828: Remove useless 'type' parameter in placerequest.pl

To test:
 1) Grep for placerequest.pl in the source code and check that
    request.tt is the only place where the type parameter is passed.

Signed-off-by: David Nind <david@davidnind.com>
JD amended patch: adjust commit title
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30774: Typo: i %sEdit %sReserve %s
Owen Leonard [Tue, 17 May 2022 11:19:19 +0000 (11:19 +0000)]
Bug 30774: Typo: i %sEdit %sReserve %s

This patch removes an out of place "i" and replaces it with a space. The
patch also removes obsolete CDATA markers in the page's JavaScript.

To test, apply the patch and go to Course reserves.

- Create a course if necessary, then view the details of your course.
- Click the "Add reserves" button.
- Enter a barcode or biblionumber.
- On the next page, the heading "Reserve [title] for [course]" should
  look correct, with no extra "i" at the beginning of the line.

Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30772: (follow-up) Age restriction message
David Nind [Sat, 28 May 2022 18:55:59 +0000 (18:55 +0000)]
Bug 30772: (follow-up) Age restriction message

Improve age restriction message.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30772: Terminology: Replace instances of "reserve" with "hold"
Owen Leonard [Tue, 17 May 2022 12:04:41 +0000 (12:04 +0000)]
Bug 30772: Terminology: Replace instances of "reserve" with "hold"

There were several templates where we were still using the term
"reserve" instead of "hold." This patch corrects the ones I found,
including in a couple of HTML comments.

To test, apply the patch and confirm that the changes look correct and
affect only the relevant term.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 29860: Remove item type-related warnings
Tomas Cohen Arazi [Wed, 12 Jan 2022 14:15:10 +0000 (11:15 -0300)]
Bug 29860: Remove item type-related warnings

To test:
1. Run:
   $ kshell
  k$ prove t/db_dependent/selenium/regressions.t
=> FAIL: You see several
item-level_itypes set but no itemtype set for item (985) at /kohadevbox/koha/Koha/Schema/Result/Item.pm line 905.
2. Apply this patch
3. Repeat 1
=> SUCCESS: No more item type warnings
4. Sign off :-D

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30761: Fix typos in OPAC reset password template
Owen Leonard [Tue, 17 May 2022 12:30:28 +0000 (12:30 +0000)]
Bug 30761: Fix typos in OPAC reset password template

This patch corrects the word "PLease" to "Please." The patch also adds
some periods at the end of some alert strings to make punctuation
consistent between different alerts.

To test, an inspection of the patch is probably enough. The main fix
(the "PLease") only appears when an unknown error occurs.

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30862: Typo: langues
Caroline Cyr La Rose [Fri, 27 May 2022 21:52:06 +0000 (17:52 -0400)]
Bug 30862: Typo: langues

This patch changes the word 'langues' to 'languages' in the description
of the following system preferences:

- OPACXSLTDetailsDisplay

- OPACXSLTListsDisplay

- OPACXSLTResultsDisplay

- XSLTDetailsDisplay

- XSLTListsDisplay

- XSLTResultsDisplay

To test:
1- Apply patch
2- Check the aforementioned system preferences and make sure the descriptions say 'languages'

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30853: Add description for baskets in swagger.yaml
Tomas Cohen Arazi [Thu, 26 May 2022 12:52:46 +0000 (09:52 -0300)]
Bug 30853: Add description for baskets in swagger.yaml

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30528: Process limits before handling CCL query
Nick Clemens [Thu, 14 Apr 2022 12:20:09 +0000 (12:20 +0000)]
Bug 30528: Process limits before handling CCL query

This patch moves the code that handles limit processing before that for CCL queries to ensure that special limit cases (branch, multibranch, etc) are handled before adding the limits to the query string

To test:
1 - Apply unit tests patch only
2 - prove -v t/db_dependent/Search.t
3 - It fails
4 - Apply this patch
5 - It passes!
6 - Test searching and confirm things work as epxected

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30528: Unit tests
Nick Clemens [Thu, 14 Apr 2022 12:19:22 +0000 (12:19 +0000)]
Bug 30528: Unit tests

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30870: Don't skip tests if Test::Deep if not installed
Jonathan Druart [Tue, 31 May 2022 09:29:57 +0000 (11:29 +0200)]
Bug 30870: Don't skip tests if Test::Deep if not installed

We are using Test::Deep in different tests, but from t/db_dependent/Koha.t the tests are skippted if the module is not installed.
We must assume the module is installed

Test plan:
  prove t/db_dependent/Koha.t
should return green in ktd

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 29883: Add test
Jonathan Druart [Tue, 31 May 2022 09:26:36 +0000 (11:26 +0200)]
Bug 29883: Add test

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 29883: avoid uninitialized value warn in GetAuthorisedValues sub
Petro Vashchuk [Fri, 14 Jan 2022 09:57:39 +0000 (11:57 +0200)]
Bug 29883: avoid uninitialized value warn in GetAuthorisedValues sub

GetAuthorisedValues is defined with optional parameter $category but it
is instantly interpolated without preventing "Use of uninitialized value
$category in concatenation (.) or string at .../C4/Koha.pm line 491."
warning.
As category param is optional, we can avoid throwing that warn as it is
something that can happen and is not an actual error:
C<$category> returns authorized values for just one category (optional).

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30854: (QA follow-up) Spec fixes
Tomas Cohen Arazi [Thu, 26 May 2022 13:42:29 +0000 (10:42 -0300)]
Bug 30854: (QA follow-up) Spec fixes

This patch fixes minor spec QA issues:

* Missing summary for routes
* Missing error_code description for 500

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30854: Missing description for 'import_record_matches' in swagger.yaml
Tomas Cohen Arazi [Thu, 26 May 2022 13:38:59 +0000 (10:38 -0300)]
Bug 30854: Missing description for 'import_record_matches' in swagger.yaml

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30742: Remove 'bad_bibs' and send a list of holdable bibs
Nick Clemens [Fri, 13 May 2022 15:23:30 +0000 (15:23 +0000)]
Bug 30742: Remove 'bad_bibs' and send a list of holdable bibs

Currently place request gets a list of bad_bibs that is created via javascript on the
template. It ignores this list

Ths patch instead doesn't add info for bad bibs, and provides a list of the bibs that
can be held

To test:
1 - Attempt multi hold with some items that can be held, and one that cannot due to notforloan
2 - Fill in pickup locations and place hold
3 - Note hold is place on bib with no avilable items and hsows twice in results
4 - Apply patch
5 - repeat with another patron
6 - Note no aidditonal hold on record with notforloan items
7 - Note with with not for loan items appears only once in results

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30742: Prevent placing holds on items/records where all items notforloan
Nick Clemens [Fri, 13 May 2022 14:01:48 +0000 (14:01 +0000)]
Bug 30742: Prevent placing holds on items/records where all items notforloan

This patch does a few things:
1 - Adds itemtype not for loan status to display
2 - Adds a conditional to display notforlaon status as the reason a hold cannot be placed
3 - Seperates the lower 'Place hold(s)' buttons for single and multi holds into two template sections
4 - Handles the case where all bibs in a multi hold have no items available
5 - Disables the button for single hlds when all items are unavailable

To test:
 1 - Find or create a record with all items of itemtype marked 'notforloan'
 2 - Attempt to place single hold on this record from staff client
 3 - See one disab;ed button, one enabled 'Place holds' button
 4 - Click 'Place holds' - hold placed
 5 - Cancel hold
 6 - Place multiple holds with some bibs that can be held, and this one that cannot
 7 - Notice message that 'Cannot place hold on some items'
 8 - Click 'Place holds' - hold is generated for the notforloan bib
 9 - Apply patch
10 - Place single hold
11 - Note you now see not for loan status on items
12 - Note the red x also includes message abnout not for loan status
13 - Note the 'Place hold' button is disabled
14 - Attempt multi hold
15 - Message now includes "No items available: One or more records have no items that can be held"
16 - Click 'Place holds'
17 - Above still places the hold - this is for a followup patch

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30837 - Fix table width on 'Print summary'
Magnus Enger [Tue, 24 May 2022 12:12:35 +0000 (12:12 +0000)]
Bug 30837 - Fix table width on 'Print summary'

To reproduce:
- Make sure you have a patron with at least one checkout,
  one hold and one fine
- On the detail page for that patron, go to Print > Print
  summary
- Observe the tables are too wide to fit on a printed page

To test:
- Apply this patch
- Repeat the steps above
- Observe the table now fits on the page

Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 30831: Unit test
Nick Clemens [Mon, 23 May 2022 12:18:11 +0000 (12:18 +0000)]
Bug 30831: Unit test

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: minor typo fix

2 years agoBug 30830: Add Koha Objects for Koha Import Items
Nick Clemens [Mon, 23 May 2022 12:25:53 +0000 (12:25 +0000)]
Bug 30830: Add Koha Objects for Koha Import Items

To test:
prove -v t/db_dependent/Koha/Import/Record/Items.t

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 28152: Log the "duplicate item barcode" error
Jonathan Druart [Mon, 10 Jan 2022 10:22:54 +0000 (11:22 +0100)]
Bug 28152: Log the "duplicate item barcode" error

Looking at the code this 'import_error' column is empty for the last 9 years. Not sure it makes much sense to have this single error now.

commit 1dba9c6409d78cb1f90de6c1300cb5b63fb1b851
Date:   Wed Oct 10 14:21:22 2012 -0500
    Bug 7131: teach MARC import how to overlay items

Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 28152: Fix import_items row creation if duplicate barcode
Jonathan Druart [Thu, 15 Apr 2021 10:12:23 +0000 (12:12 +0200)]
Bug 28152: Fix import_items row creation if duplicate barcode

We are trying to insert "duplicate item barcode" into import_items.itemnumber (integer),
it fails with "Incorrect integer value: 'duplicate item barcode' for column 'itemnumber' at row 1"

To reproduce:
Export a biblio with an item
Import it
=> The item is not added, and there is no new row in import_items.

The error only appears in the log if you comment the close STDERR and
close STDOUT lines

Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoBug 29828: Prevent additional content to be created without default
Jonathan Druart [Mon, 10 Jan 2022 09:15:35 +0000 (10:15 +0100)]
Bug 29828: Prevent additional content to be created without default

When creating or editing an additional content, the form is submitted if
only the title of the 'default' tab is filled in.
We should submit the form only if both title and content exist.

Test plan:
Create a new content using text editor (codemirror)
Confirm that the form is submitted only if title and content from the
default tab are not empty
Try again with wysiwyg (tinymce)

Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoKoha 22.06 - start of a new dev cycle
Tomas Cohen Arazi [Tue, 31 May 2022 11:42:29 +0000 (08:42 -0300)]
Koha 22.06 - start of a new dev cycle

    The road of excess
    leads to the palace of wisdom;
    for we never know what is enough
    until we know what is more than enough.

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
2 years agoKoha 22.05.00 is here! v22.05.00
Fridolin Somers [Thu, 26 May 2022 09:47:49 +0000 (23:47 -1000)]
Koha 22.05.00 is here!

Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>