Owen Leonard [Tue, 27 Nov 2012 16:16:14 +0000 (11:16 -0500)]
Bug 7110: Renewal messages no longer displays in OPAC if OpacRenewalAllowed is disabled
Prior to this patch, if a patron has fines which exceed the limit set by
OPACFineNoRenewals but OPAC renewals are disallowed by OpacRenewalAllowed,
a message was displayed in their OPAC summary like this:
"Please note: You currently owe XXX in fines. Please pay your fines if you wish
to renew your books."
Information about outstanding fines in this case has no bearing on
how the user sees his summary of checkouts; since the user cannot
renew the loans from the OPAC regardless of their fine balance if
OpacRenewalAllowed is not enabled, this patch removes the message.
To test, try various combinations of OpacRenewalAllowed and
OPACFineNoRenewals with a patron who has outstanding fines:
- OpacRenewalAllowed ON and OPACFineNoRenewals ON (set to be triggered
by the test patron's fines): Logging in to the OPAC the patron should
see a warning on opac-user.pl about not being able to renew items
because of fines.
- OpacRenewalAllowed ON and OPACFineNoRenewals OFF (threshold high
enough not to trigger a block): No warning appears.
- OpacRenewalAllowed OFF and OPACFineNoRenewals ON: No warning appears.
- OpacRenewalAllowed OFF and OPACFineNoRenewals OFF: No warning appears.
If OpacRenewalAllowed is diabled and a patron's fines exceed the limit
set by OPACFineNoRenewals they should see no message.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-ql.pl and perlcritic
Kyle M Hall [Thu, 20 Dec 2012 14:31:23 +0000 (09:31 -0500)]
Bug 9307 - Allow libraries to add/edit status for suggestion management.
This patch allows for the addition of new suggestion status by adding
authorised values of the category SUGGEST_STATUS
I sign it off. Details of my test plan :
1. Applying the patch
2. Checking existing suggestions, in staff view and opac : ok
3. Creating a new suggestion in staff and in opac : ok
4. Moving a suggestion into one of the old categories : ok
5. Adding a new authorized value category named SUGGEST_STATUS and fill it with 3 values :
value Description Description (OPAC) =)>
tata tatapro tataopac
titi titipro titiopac
toto totopro totoopac
For "tata", I defined a branch restriction on branche B.
6. Connecting in staff interface as a librarian of branch A : I could only use codes titipro and totopro. On OPAC, these codes were displayed as totoopac and titiopac
7. Connecting as librarian of branch B : I could use the 3 codes
8. Checking tabs visible : new tabs for tata, titi, toto, but also a new "Unknown" tab with 0 record.
Maybe point 8 could be fixed in a followup.
I sign off the patch.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Galen Charlton [Tue, 18 Jun 2013 15:37:09 +0000 (08:37 -0700)]
Bug 10332: further improvements to course reserves tests
- Wrap tests in a database transaction; that
way, no special cleanup code is required
- Use AddItem rather than AddItemFromMarc to create
test items; there's no need to build in a
dependence on any particular MARC flavor or
framework in our test cases (except, of course,
for test cases that are explicitly exercising
code that involves the frameworks).
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Without correct data, test fails prior to patch, passes no matter what
after patch is applied.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 9826 - Missing fields in MARC21 authority framework
This patch updates MARC21 authority framework adding
missing tags/subtags up to Update No. 15 (September 2012)
Missing tags and corresponding subtags only added to
default authority framework.
For present authtypes only missing subtags are added.
Also updates a few legends to match those from LOC.
No deletions except for a few not relevant tags in
present authtypes without subfields.
Only to new installs.
To test:
1) Delete present authority frameworks
2) Load new frameworks. On default there are
many new tags/subtags. On present authtypes
only a few new/renamed subtags.
Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Tue, 19 Feb 2013 16:41:59 +0000 (11:41 -0500)]
Bug 9541: make OPAC login page respect OPAC_CSS_OVERRIDE
When clicking the login link for opac-user.pl in a multiple branch
scenario the environment variable for OPAC_CSS_OVERRIDE was ignored from
the koha-conf.xml file. It seems like is is working on every page in
the opac except for the login page.
Test Plan:
1) Set up a Koha server with 2 separate catalog configurations
( e.g. opac1.kohatest, opac2.kohatest )
2) Set the OPAC_CSS_OVERRIDE directive for separate css files
in each opac
3) Browse to the opac login page, note the css is not applied
4) Apply this patch
5) Reload the page, note the css is now applied
Fridolyn SOMERS [Thu, 28 Feb 2013 11:36:24 +0000 (12:36 +0100)]
Bug 9728: XISBN use bibliographic search instead of SQL to fetch related bibs
XISBN API uses normalized ISBN of a biblio to get a list of ISBNs
of related editions, then searched via SQL in database for biblios
with those ISBNs.
I noticed that if input ISBN has hyphens, the ISBNs returned by the
OCLC XISBN service also have hyphens; otherwise, if the input ISBN
doesn't have hyphens, the returned ISBNs don't either.
Consequently, an SQL query on biblioitems.isbn may not turn up
the right biblios.
Also, if biblio has several ISBNs, only first one can be found with
the original SQL query (isbn LIKE '$xisbn%').
This patch replaces SQL query by a simple search "nb=$xisbn". This will
find biblio from ISBN with or without hyphen.
Test plan :
- Activate FRBRizeEditions and XISBN sysprefs
- Go to a biblio witch has several editions
- Note its normalized ISBN (you may look in amazon links)
- Replace [ISBN] by biblio normalized ISBN in this URL : http://xisbn.worldcat.org/webservices/xid/isbn/[ISBN]?method=getEditions&format=xml&fl=form,year,lang,ed
- Go to this URL and see which ISBNs are returned
- Perform a simple search on thoses ISBNs : nb:1234567890
- Look at "Editions" tab
=> Check that diplayed biblios are the same you found by simple search
Jonathan Druart [Fri, 3 May 2013 09:53:10 +0000 (11:53 +0200)]
Bug 10182: Stay on the same tab after saving a biblio
When editing a biblio, the bug 7883 introduces the "save and continue
editing" feature. After saving, the page is loaded with the first
tab selected. This patch refresh the page with the same tab selected.
Test plan:
1/ Edit a biblio.
2/ Click on the 5th tab.
3/ Click on the "Save and continue editing" button.
4/ You are redirected on the same page with the same tab selected
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 31 May 2013 15:03:56 +0000 (11:03 -0400)]
Bug 9665: add RIS and BIBTEXT bibliographic record export to staff interface
The OPAC offers RIS and BIBTEX as choices for bibliographic downloads,
but the staff client was missing these options. This patch adds them.
To test, view a record in the staff client (detail.pl, MARCdetail.pl,
etc.) and click the "Save..." toolbar button. BIBTEX and RIS should be
available and functional.
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Thu, 16 May 2013 07:52:41 +0000 (09:52 +0200)]
Bug 10256: Remove some unused subs from Overdues module
Removes the following exported but unused subs from Overdues.pm:
CreateItemAccountLine
UpdateAccountLines
CheckAccountLineLevelInfo
CheckAccountLineItemInfo
CheckExistantNotifyid
GetNextIdNotify
GetNotifyId
ReplacementCost
ReplacementCost2
GetOverdueDelays
GetOverduerules
Test plan:
It is hard to test the removal of something that was not used :) Try this:
Do a recursive grep on these routine names in the Koha codebase.
Compile some scripts that use the Overdues module.
And just to be sure we do not break something:
Go to Circulation: Do a checkout, checkin, place and confirm a hold.
Go to Patrons: Goto Check out. Goto Fines.
Run the command line scripts: fines.pl and overdue_notices.pl.
Go to opac-user.pl.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Mon, 10 Jun 2013 12:05:32 +0000 (14:05 +0200)]
Bug 10439: fix bug preventing the library for a notice from being changed
2 javascript functions should be apply only in a specific case, not for all
views.
Test plan:
- Switch on the IndependentBranches pref and log
in as a superlibrarian.
- Try to change the library for a notice. Before the patch,
no change is applied.
- Try to create a new notice, changing the library from
default in the process. Before the patch, the notice
is not created.
The bug can also be reproduced when IndependentBranches is
off, in which case the staff user need not be a superlibrarian.
Bug 10464: Patron search on placing a hold now supports autocomplete
The patron search box for placing a hold request on a bib in the
staff interface now supports autocomplete if the CircAutocompl
system preference is enabled.
This patch grabs the autocomplete handling javascript stuff from patron-search-box.inc
and puts an adjusted version on reserve/request.tt. It sets form and input
IDs to match those configured in the autocomplete call, adjusted where needed to
avoid name collisions with the patron-search-box.inc that is present everywhere.
This patch also doubles the width of the patron search input field.
To test:
- On a biblio record, go to the Holds tab, mine looks like
/cgi-bin/koha/reserve/request.pl?biblionumber=2
- A search box is shown for patron searching.
- Search for a patron: it works as usual.
- Make sure CircAutocompl is "Don't try"
- Apply the patch
- Click the Holds tab again, and do the same search: functionality should remain intact.
- Change CircAutocompl to "Try"
- Click the Holds tab again
- Autocomplete should show you the possible options, and once you choose one result,
it should work as usual.
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Adding a nice new autocomplete feature.
Bug 10141: improve editing of MARC21 bib 008/18-21 and 008/24-27
This patch changes the MARC21 008 editing form to create dropdowns
for each of the 008/18-21 (Illustrations) and 008/24-27 (Nature of contents)
positions.
To test:
1) Edit or add a new bibliographic record
2) Click on field 008 value builder, positions 18-21 and 24-27 only
show an input text box
3) Apply the patch
4) Reload value_builder page, now each position (18-21,24-27) has
its own dropdown. Note that it may be necessary to clear
the browser cache for the change to be visible.
Similar changes could be made for the 006 value builder.
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Sun, 10 Mar 2013 13:47:55 +0000 (09:47 -0400)]
Bug 9779 - Remove global include of YUI assets from the staff client
There are no pages in the staff client which use YUI JS assets other
than basketgroups.tt. The links to YUI assets can therefore be removed
from the global include and put directly into the basket groups
template.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Really nice to see YUI go.
Checked that the drag&drop functionality in basket groups still works.
David Cook [Fri, 14 Jun 2013 03:03:19 +0000 (13:03 +1000)]
Bug 10466: fix glitch in OPAC display of titles saved to list
When displaying (in the OPAC) the set of records saved to a list,
an apparently random number (typically 33 or 34) is sometimes
displayed at the end of the publication description. In particular,
this can occur when XSLT is *not* being used to display search results;
this patch corrects the problem.
Now for the technical details:
This patch checks to see if "size" is undefined. If it is, we add a
blank (i.e. "") value to it in place of undef.
If we do not do this, calling "itemloo.size" will return the size
of the "itemloo" hash, rather than the value for the "size" key.
This is because "size" is a virtual method in Template Toolkit. It's
uncertain why the value is retrieved for the "size" key when there is
a defined value and why TT doesn't use the method instead, and that
it uses "size" as a method only if there is either no "size" key or
if the value tied to the "size" key is null/undef. This might be a
feature or it might be a bug in TT...
In the meantime, we will check to see if it's undefined. If it is,
we'll give it a value.
This bug has been identified in the opac-search.pl, search.pl and
addbooks.pl pages before. To address it, we're currently checking
if there is a "size" key, and if not...we're adding one with a blank
value.
This patch takes up that same idea, although I think it might be better
to rename the variable before passing it to TT in case the behaviour
of TT changes in the future in regards to how it handles virtual
methods.
N.B. Obviously, this only affects users not using XSLTs.
--
Test Plan:
Before applying the patch:
0) Make sure you have opac search result XSLT turned off
1) Find bib records that do not have a 300$c (Dimensions) value.
2) Find bib records that do have a 300$c (Dimensions) value.
(N.B. These values should be stored in the `size` column of biblioitems).
3) Add items from both sets of records to a List
4) Note that records without a 300$c will display a number at the end
of the "Publication" description/string. It should be something like
33 or 34 in most cases.
5) Note that records with a 300$c don't display this number. They just
show the value from 300$c.
Apply the patch.
6) Clear your cache, refresh the page, etc.
7) Note that the number (e.g. 33 or 34) has disappeared from the end
of the "Publication" description/string.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Added a small comment at the end of this one line.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Classes now appear on <th> as well for easy styling.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, template changes only. Adds classes and id's to table
headers, makes no other changes.
This patch corrects several problems with the course reserves add item
pages:
- Non-standard grid markup.
- Extra </div>.
- Incorrect styling of errors and messages.
- Redundant JS for adding focus to a field (use "focus" class).
- Invalid use of <label> with no corresponding input (use <span
class="label"> instead).
- Incorrect capitalization.
To test, apply the patch and examing both steps of the process of adding
an item to an existing course: The initial "scan barcode" form, and the
form for editing details of a scanned item.
Some cases to check:
- Scan an invalid barcode.
- Scan a barcode which has already been added to a course.
- Scan a barcode wihch has already been added to the course you're
working with.
Forms should look correct and work correctly.
This patch contains whitespace changes, so please ignore whitespace when
examining changes.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The add item screen continues to work as before.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl. Works as advertised.
This patch corrects several problems with the course reserves course
detail page:
- Unescaped ampersands
- Extra </div>
- Incorrect text in title tag
- Use of a table to display information which is more consistently
displayed as a list.
- More accurate alert message, "Are you sure you want to remove this
item from the course?" rather than "Are you sure you want to delete
this item?"
- Missing icons from toolbar buttons
To test, apply the patch and view the details of an existing
course (Course reserves -> [Course name]). Confirm that these changes
are present and look like an improvement.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The course details screen looks much more consistent with other parts
of Koha now.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, template only changes. Everything checks out and
works as advertised.
Fridolyn SOMERS [Thu, 6 Jun 2013 08:57:29 +0000 (10:57 +0200)]
Bug 10425 - Help page missing for Local Use preferences
When viewing Local Use system preferences tab, the help button will lead to an error page.
This is because Local Use tab uses not the same script has other tabs : systempreferences.pl.
This patch adds help/systemprefences.tt
Test plan :
- Go to Local Use preferences : /cgi-bin/koha/admin/systempreferences.pl
- Click on Help link (at right top)
- See you get the same page as other preferences tab help
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Thu, 23 May 2013 16:44:58 +0000 (12:44 -0400)]
Bug 10315 - Use easier readable font for generated passwords
The text inputs on the change password form are not very big, and the
default sans-serif font isn't always good for showing unambiguous
characters. This patch sets a larger, monospace font for those fields.
To test, apply the patch, clear your browser cache, and open the patron
change password form (members/member-password.pl). The inputs should be
more readable, especially the password fields when you click to fill
with a randomly generated password.
Jonathan Druart [Thu, 13 Jun 2013 09:11:07 +0000 (11:11 +0200)]
Bug 10444: Fix prevent the default action on click
In particular, clicking the [+] and [-] links on the
OPAC advanced search page will no longer scroll
the page back to the top.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10444 - (CCSR followup) In advanced search(more), [+] and [-] should behave like links on hover
Same fix for CCSR.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10444 - In advanced search(more), [+] and [-] should behave like links on hover
This patch add href="#" to the [+] and [-] links for adding and removing
search terms. It also defines its style so it doesn't show underlined.
To test:
- Browse your OPAC to "Advanced Search" and then "More options".
- The [+] and [-] don't change the cursor on hover
- Apply the patch, reload and see the cursor changes
- Functionality should remain unchanged
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Thu, 13 Jun 2013 08:20:27 +0000 (10:20 +0200)]
Bug 10458: Remove obsolete Z3950 module and test
Are not used. Contain several FIXMEs.
Removing them makes life easier.
Test plan:
Actually, you cannot test this.
But for confidence: do a Z3950 search in cataloguing and acquisition.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10443 - Table borrower_files does not exists in kohastructure.sql file
As a consequence, the borrower_files table would not exist
in Koha databases that were installed starting at 3.10.0
or later.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Thu, 25 Oct 2012 13:31:22 +0000 (09:31 -0400)]
Bug 8662 - Remove unused famfamfam icons
This patch removes images in the famfamfam directory
which are unused by Koha. Files to delete were chosen
based on a search of the Koha source.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Mon, 10 Jun 2013 15:14:41 +0000 (11:14 -0400)]
Bug 10297 - categorycode and branchcode should be required when adding patrons
categorycode and branchcode should show as required under all
circumstances, not just when they are included in the
BorrowerMandatoryField system preference. This patch adds the correct
classes and hints to those fields.
To test, view the patron entry form for a new or existing patron.
Category and Library should show that they are required.
Signed-off-by: David Cook <dcook@prosentient.com.au> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Mon, 10 Jun 2013 18:21:11 +0000 (14:21 -0400)]
Bug 10432 - Display of enabled status on course list is not accessible
The list of courses in Course Reserves uses an image with no alt
attribute to display the enabled/disabled status of each course. This is
not accessible or valid HTML.
This patch removes the image altogether in favor of a simple "Yes" or
"No." To test, view the list of existing course reserves. Enabled and
disabled courses should show "yes" or "no" in the "Enabled" column.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Wed, 9 Jan 2013 01:32:47 +0000 (17:32 -0800)]
bug 9370: improve splitting of LC call numbers for labels
Use the Perl module Library::CallNumber::LC to parse and split
LC call numbers when generating spine labels.
For example, QH541.15.C6 C25 2012 should be split as follows:
QH
541.15
.C6
C25
2012
To test, create an item with call number QH541.15.C6 C25 2012
and classification source LC, then create a spine label for that
item using a layout of type 'biblio' that has the split call numbers
option enabled. The call number should be split as indicated above.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10406: memove div and more obsolete CSS related to YUI autocomplete
To test:
- Apply, then test the patron search form
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Wed, 22 May 2013 13:52:40 +0000 (09:52 -0400)]
Bug 10311 - Holds queue ignores item-level holds where only one items exists
If a record has only one item, and that item has one item-level hold on
it, that hold will not show in the holds queue.
Test Plan:
1) Create 1 record with 1 item at BranchA
2) Create an item-level hold for that item, for pickup at BranchA by a
patron of BranchA
3) Run build_holds_queue.pl
4) View the holds queue for BranchA
5) Note the hold is not in there
6) Apply this patch
7) Re-run build_holds_queue.pl
8) View the holds queue again
9) Not that the hold is now there
Signed-off-by: George Williams <georgew@latahlibrary.org> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Galen Charlton [Fri, 17 Aug 2012 15:23:47 +0000 (11:23 -0400)]
bug 6281: introduce LC::CallNumber::LC for sorting LC call numbers
This replaces the previous hand-coded normalizer. Because
LC::CallNumber::LC appears to reject strings that aren't valid
LC call numbers, significant changes to the test cases were
made as well -- however, the one that really counts is the
last one which verifies the sorting.
To recalculate the call number sort key for each item, it is necessary
to run misc/maintenance/touch_all_items.pl
To test, create item records with the following call numbers, setting
the classification sort to 'lcc':
Owen Leonard [Tue, 9 Apr 2013 17:46:14 +0000 (13:46 -0400)]
Bug 10406 - Remove obsolete CSS related to YUI autocomplete
staff-global.css contains CSS which related to the old YUI autocomplete
widget. Since this has been replaced with jQueryUI the CSS is now unused
and can be removed.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Jonathan Druart [Tue, 21 May 2013 12:54:36 +0000 (14:54 +0200)]
Bug 10296: UT: t/data/db_schemas not needed
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
These were added with the intention of writing some
schema verification test cases, but if that idea
gets picked up again in the future, fresher copies
of kohastructure.sql can be obtained from Git.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Wed, 29 May 2013 14:20:46 +0000 (16:20 +0200)]
Bug 10343: dbrev for rename OpacShowHoldNotes to OpacHoldNotes
Renames the pref for install and upgrade.
Test plan: See the other patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Wed, 29 May 2013 14:19:27 +0000 (16:19 +0200)]
Bug 10343: Rename OpacShowHoldNotes to OpacHoldNotes
As QA followup on report 9722. Built on top of another followup report 10321.
Test plan:
Run the db revision included in the other patch.
Enable OpacHoldNotes. Check that you can add a hold note on opac-reserve.
Do you see it on opac-user and in staff on catalog detail of that biblio?
Do a grep on ShowHoldNotes on the Koha code: grep -i ignores case. You should
find three occurrences only in updatedatabase.pl (the old dbrev and this dbrev
renaming them). These are fine.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Tue, 4 Jun 2013 19:35:42 +0000 (15:35 -0400)]
Bug 2774 - Path to theme is hard-coded in many places
This patch corrects serveral more places in the templates where the path
to the prog theme is hard-coded. To test, apply the patch and view the
following cases:
- When a database update is triggered the login page loads login.css.
This path should be correct. (Reference to wizard.css is removed as
per Bug 10422).
- The course reserves home page should load datatables-related assets
correctly.
- Help pages for the Quick spine label creator and the staff client home
page should show the correct paths where they reference the Koha file
system.
- The web installer pages should correctly load the Koha logo.
- The label creator "manage" pages (layouts, templates, etc.) should
correctly load datatables-related assets.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Checked all 5 - look good.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Mon, 13 May 2013 18:26:17 +0000 (14:26 -0400)]
Bug 10221 - hold expiration doesn't show on patron's list of holds
When viewing the list of a patron's holds on the circulation page or the
patron detail page the table of holds doesn't display the holds
expiration date, if present. This patch adds display of the hold
expiration date.
To test, place a hold for a patron and set an expiration date for it.
View the patron's existing holds on both circulation.pl and
moremember.pl. The expiration date you chose should appear in the table
of information about existing holds.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
works great
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 31 May 2013 13:54:34 +0000 (09:54 -0400)]
Bug 10354 - Don't show optgroup Libraries when no search groups are defined
In the OPAC, if there are no search groups defined, there's no reason to
embed library choices inside an <optgroup>. <optgroup> should only be
used to differentiate the list of individual libraries from search
groups. This patch removes the <optgroup> when no search groups are
enabled.
To test, apply the patch and:
- Enable OpacAddMastheadLibraryPulldown.
- Create a library search group in Administration ->
Libraries and Groups and enable it by checking the "show in search
pulldown" box.
- View the library pulldown in the OPAC search bar. Libraries and groups
should be separated into <optgroup>s.
- Disable your library search group and refresh the OPAC page. The
pulldown of libraries should now display libraries with no <optgroup>.
Jesse Weaver [Mon, 3 Jun 2013 19:22:57 +0000 (13:22 -0600)]
Bug 9300 - filtering Export (MARC) data by accession date does not work
Small typo in query construction, fixed.
To test:
1) Try filtering a MARC export using "Start date"
2) Notice the lack of filtering
3) Apply patch
4) Try export again, records are filtered by dateaccessioned
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 5 Jun 2013 14:48:36 +0000 (10:48 -0400)]
Bug 10420 - Standardize spelling of "authorized"
This patch corrects instances of the non-[American]-standard spelling
"authorised" when used in text.
The following instances are corrected:
- In Administration -> Funds, the error message displayed if you do not
have permission to edit a fund.
- In Administration -> Authorized values, the instructions linked to the
"Libraries limitation" field.
- In Administration -> MARC bibliographic framework test, instructions
related to linking to authorized values.
- In the course reserves add form, error messages referring to missing
authorized values.
- In guided reports, error messages shown when an authorized value
chosen as a report parameter doesn't exit.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Wed, 5 Jun 2013 12:49:50 +0000 (08:49 -0400)]
Bug 10414 - "Course Reserves" should be "Course reserves" in global "More" menu
The global "More" menu lists "Course Reserves," which is incorrectly
capitalized. This patch changes it to "Course reserves."
To test, apply the patch and view any page in the staff client. When you
click the "More" menu item the link should read "Course reserves."
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Frédérick [Wed, 20 Mar 2013 20:01:42 +0000 (16:01 -0400)]
Bug 9549: Show local cover images in the OPAC shelf browser
Add the ability to view local cover images in the shelf browser.
To test:
1. Add a local cover image to a record. Set OPACLocalCoverImages sys pref to "display."
2. Search for the record, go to the Details page, and click on Browse Shelf.
3. Verify that the local cover image appears in the shelf browser.
Frédérick [Wed, 20 Mar 2013 21:23:39 +0000 (17:23 -0400)]
Bug 8600: can now remove search input fields in OPAC advanced search form
If you follow the 'More options' link in the OPAC
advanced search form, each search input field after
the first now has a '-' button that lets you remove
the box. This complements the '+' buttons that
already existed that allow the user to add additional
input fields.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Colin Campbell [Thu, 30 May 2013 17:23:55 +0000 (18:23 +0100)]
Bug 766: remove CGI::scrolling_list from request.pl
Let the template take care of generating the display.
Lets at least part of request.pl be more succinct.
To test, place a hold and search for the patron using a partial name.
You should get a dropdown select list of patrons and be able to select
the patron to hold for from there.
The functionality should remain unimpaired after this patch is applied.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sun, 19 May 2013 08:56:01 +0000 (10:56 +0200)]
Bug 10249: Fix untranslatable strings in OPAC detail page
Star ratings feature:
- Your CGI session cookie is not current. Please refresh
the page and try again.
- average rating:
- your rating:
Browse results feature:
- Click to rewind the list to
- See biblio
- with biblionumber
- by (between title and author)
- Click to forward the list to
- Go to detail
To test:
- Update the po file using 'perl translate update <langcode>'
- Translate all new strings, maybe mark them with XX to make it easier
to find them
- Install the updated translation file using 'perl translate install
<langcode>'
- Test the ratings and browse results features in the OPAC detail page
- Verify everything is still working/displaying like it should
- Check that you don't find any unstranslated strings/terms
Some hints where the changes are:
- Change an existing rating - the average and your rating will change
- Browse result list and check mouse over tooltips for all links
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Strings are now translated, and no emergent JS errors have revealed
themselves.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 8584: cleanup_database.pl : Add a DAYS parameter for email purges.
You can now specify a number of days with the --mail parameter. Only
mails older than the specified number of days will be deleted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sun, 14 Apr 2013 15:05:39 +0000 (17:05 +0200)]
Bug 7892: Open link to imported record in new tab
Change links to imported records to open in a new window/tab
on the staged records management page.
To test:
1) Go to Tools > Staged MARC record management
2) Open an imported batch by clicking on the file name
3) Click on bib# in the record column
4) Verify links open in a new window/tab now
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Tue, 9 Apr 2013 19:11:22 +0000 (15:11 -0400)]
Bug 10015 - UniqueItemFields could have link to database documentation
Other system preferences which require entry of database column names
include a link to the scheme for reference. The UniqueItemFields should
do the same. This patch rewords the preference description to
incorporate a link.
To test, open the acquisitions tab in system preferences and confirm
that the UniqueItemFields description looks correct and links to the
right page in the schema.
Owen Leonard [Mon, 11 Mar 2013 20:11:26 +0000 (16:11 -0400)]
Bug 9744 - Add a column Fund name on the home page of acquisitions
This patch offers an alternative option to fix Bug 9744. In this version
the table of funds swaps positions with the suggestions block so that
the table has the whole width of the screen. This eliminates the need to
adjust its float property.
Other changes:
- Simplification of the column and row-hiding JavaScript
- The addition of an "Active" column to be shown when all funds
are shown (this helps indicate to the user which rows were hidden)
- Linking the fund owner to their patron record
- Linking the fund id, given the correct permissions, to the view of all
funds for that budget (the best alternative to linking to a view of
the fund details, which we do not have).
- Correcting permission level required to add a budget
To test, view the acquisitions home page. The layout should feel
comfortable. The table of available funds should show the fund name.
The checkbox to show all funds should work correctly.
Signed-off-by: caroline very-mathieu <caroline.very-mathieu@nimes-ville.fr> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Owen Leonard [Fri, 31 May 2013 15:36:02 +0000 (11:36 -0400)]
Bug 10350 - Capitalization: Home Library column in staff detail items table
"Home library" is incorrectly capitalized on the catalog detail page.
This patch corrects it.
To test, view the normal view of record in the staff client catalog.
The "Home library" table header in the holdings table should be
correctly capitalized.
Janusz Kaczmarek [Fri, 24 May 2013 11:21:36 +0000 (14:21 +0300)]
Bug 10326: bulkmarcimport.pl doesn't restore value of CataloguingLog syspref
To test:
0) Don't apply the patch yet.
1) Have the CataloguingLog system preference set to 'Log'.
2) Import a file of bibliographic records with bulkmarcimport.pl.
3) Check the state of CataloguingLog system preference -- it will be
set to 'Don't log'.
4) Apply the patch.
5) Repeat steps 1-3. The CataloguingLog system preference
will be 'Log'.
Marcel de Rooy [Wed, 22 May 2013 13:01:07 +0000 (15:01 +0200)]
Bug 10381: Followup adding some text around Apply/cancel filter.
The texts Apply/cancel filter did not need translation and were used to get
this change into 3.12.
For 3.12.X or 3.14 we can add some words to clarify its meaning.
With thanks to Owen for some rewording.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Pierre Angot <tredok.pierre@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Thu, 27 Dec 2012 13:18:34 +0000 (14:18 +0100)]
Bug 8845: Followup Allow to give a date using the syspref format
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Colin Campbell [Wed, 30 Jan 2013 08:50:23 +0000 (08:50 +0000)]
bug 9505 refactor loops in invoices.pl
- Remove an unnecessary loop where output just
recreated input.
- Remove unnecessary temp variables that obscure code purpose.
- Call the variable containing invoices, invoices
rather than anonymous and ambiguous results
reflect namechange in template.
- Lists are passed to template as array refs;
declare them as scalars as that is how we use them.
- No need to introduce the whole namespace of some C4
modules for 1 routine.
Test plan:
Note that this patch should not change any visible behavior.
[1] Open the invoice search page.
[2] Verify that the list of suppliers in the drop-down
on the search form is complete.
[3] Verify that the list of libraries in the drop-down
on the saerch form is complete.
[4] Perform a search. Verify that the list of invoices
is correct.
Owen Leonard [Fri, 8 Mar 2013 17:16:19 +0000 (12:16 -0500)]
Bug 9773 - Replace YUI AJAX calls in cataloging plugins with jQuery
Several cataloging plugins make some simple AJAX GET calls via the YUI
AJAX feature. This code can be easily converted to jQuery.
To test, link each plugin to the relelvant field by editing your MARC
stucture. Confirm that functionality is unchanged.
For callnumber.pl and callnumber-KU.pl, test by linking to 952o.
callnumber.pl is triggered on blur of (when you focus on and click away
from) the 952o entry field. callnumber-KU.pl is triggered by clicking
the "..." link.
stocknumberam123.pl should be linked to 952i. If your data doesn't
already have information stored for inventory number, modify at least
one record to add one. The plugin is triggered on blur of the 952i
field. It should increment the highest value inventory number stored in
your system.
unimarc_field_010.pl is UNIMARC-specific, so I'm guessing about its
functionality. I tested it by linking the plugin to MARC21 field 020a.
The plugin is triggered on blur of the affected field (020a in my test).
You can confirm that the plugin returns valid data by using a tool like
Firebug to view the XHR response. Or if you're not using UNIMARC you can
hack the plugin to update a different field instead (line 57,
/^tag_210_subfield_c/ ). I tried "245_subfield_c" instead of
"210c_subfield_c." Nonsensical, but useful for testing.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tried the 3 MARC21 plugins. Did not try the Unimarc one, but it's exactly the same code change.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Thu, 7 Mar 2013 13:56:59 +0000 (08:56 -0500)]
Bug 9763 - Add callnumber column to "print summary" for moremember.pl
Test plan:
1) Apply patch
2) Check out some items to a borrower
3) Choose "Print summary" from the "Print" pulldown
4) Observe the new callnumber column after "Author" and before "Item type"
5) Note that the totals in the footer are still aligned correctly
Signed-off-by: Eli Anthony <library.assist@taylorcountygov.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10359: transform masthead dropdown after user JS for CCSR
Since libraries may want to customize the options in the masthead search
dropdown, which is done via dropdown, it would be better if the select
box were transformed *after* user javascript was run.
To test:
1) Switch to the CCSR OPAC theme.
2) Add some Javascript to your OpacUserJS that will modify the masthead
search dropdown, such as:
$("select[name='idx']").append("<option value='Host-item,wrdl'>Journal title</option>");
3) Note that when you view the OPAC, the results in the dropdown are unchanged.
4) Apply patch.
5) Note that your new option now shows up.
6) Sign off.
Galen Charlton [Mon, 20 May 2013 17:12:44 +0000 (10:12 -0700)]
bug 10292: improve fallback logic for picking XSLT
This patch fixes a bug whereby XSLT files from the
prog theme would be used (for English OPACs and staff
interfaces) even if the user had created and enabled a
custom theme that provided override XSLT files.
This patch provides a clearer implementation of the fallback
logic and adds test cases.
To reproduce the bug:
[1] Set OPACXSLTDetailsDisplay to 'default' and English as the OPAC
language.
[2] Create a new OPAC theme, including copying the XSLT files.
[3] Set opactheme to the new theme.
[4] Make a change to koha-tmpl/opac-tmpl/NEWTHEME/en/xslt/MARC21slim2OPACDetail.xsl
[5] View a bib record in the OPAC. The change made in the previous step
is not reflected.
To test after applying the patch:
[6] Reload the bib record in the OPAC. The change made in step 4 should
now be reflected.
[7] (To be thorough) Go through the test plan for bug 8947
and verify that there is no regression.
Kyle M Hall [Thu, 16 May 2013 18:02:24 +0000 (14:02 -0400)]
Bug 10262 - fine calculation at checkin not respecting CircControl
The fines.pl script uses the system preference CircControl to decide
what branches circ rules to use for fine generation.
Recently, code was added to the returns system to recalculate the fine
at checkin time ( to support hourly loans ). The problem is that this
code does not respect CircControl.
Test Plan:
1) Set circ control to "the library you are logged in at"
2) Set different fines rules for two different librarys
3) Check an item out at library A, backdate the due date so it's overdue
and will have fines.
4) Check the item in at library B
5) Observe that the fines should be generated based on library A's rules,
but the fines will be based on library B's rules instead!
5) Apply the patch
6) Repeat steps 3 and 4.
7) Observe now that the fines should reflect the fines rules for Library A
Note: it seems counter-intuitive for the fines system to behave this way
based on the preference being set to "the library you are logged in at"
but it does make sense. The rules used are from "the library you are
logged in at" when the item is first checked out.
If the fines system really did use the rules for the library the item was
returned to, it would be easy to exploit the library system. Some Koha
using systems have branches that charge fines, and others that don't, so
a patron could just return any overdue items to a non-charging branch
to avoid ever paying fines!
Furthermore, it would mean that the fines.pl script would be using one
set of rules to charge fines, and the returns system could possibly be
using another. Since fines.pl has been around far longer, it makes sense
to assume the fines.pl behavior is canonical.
Signed-off-by: Mickey Coalwell <mcoalwell@nekls.org> Signed-off-by: George Williams <georgew@latahlibrary.org> Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Merged with reservations; see comment on bug report for details.
Owen Leonard [Mon, 13 May 2013 19:07:34 +0000 (15:07 -0400)]
Bug 10218 - In OPAC XSLT search results, add class to 'online access'
In some cases in OPAC search results and the detail page there is a
class specific to each line of data being output (publisher, date,
subjects, etc). In other cases there is no additional class. This patch
makes modifications to a few different OPAC files in an attempt to make
them consistent with each other.
To test, apply the patch and view:
- an OPAC detail page with OPACXSLTDetailsDisplay off
- the OPAC search results page with OPACXSLTDetailsDisplay off
- the OPAC search results page with OPACXSLTDetailsDisplay on
Labels should have classes relevant to their data. To test the specific
case requested by this bug, view details/results for a record which
includes online resources (856u in MARC21).
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
html changes only, passes all tests
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Colin Campbell [Fri, 3 May 2013 14:35:44 +0000 (15:35 +0100)]
Bug 10184 - Circulation History reverses sort order
Issue data is passed to the readingrec template ordered
most recent due date first. Datatables unless specified
otherwise do a presort on the data they will display
the default results in an order the reverse of what was
intended. Disabling the presort preserves the initial sort
order until the user selects a different sort
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Fri, 14 Dec 2012 12:31:00 +0000 (07:31 -0500)]
Bug 9286 - Add script to add a bib to the zebra queue from the command line
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: No test plan, but works.
Tested adding auth, biblios or both, then rebuilding -z
No errors.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Test Plan
1/ run misc/mod_zebraqueue.pl -a 1
2/ In your koha db
SELECT * FROM zebraqueue WHERE done = 0;
Check that a row for authority record id 1 has been inserted
3/ run misc/mod_zebraqueue.pl -b 1
4/ In your koha db
SELECT * FROM zebraqueue WHERE done = 0;
Check that a row for biblio record id 1 has been inserted
5/ run misc/mod_zebraqueue.pl
Make sure the help is sensible Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Mon, 13 May 2013 19:21:46 +0000 (15:21 -0400)]
Bug 10193 - Copies should be holdings as label for items on MARC view
In the OPAC MARC view, the table of holdings is labeled 'copies.' In
order to be consistent with the normal view this should be labeled
'holdings.' This patch makes this correction.
To test, apply the patch and view the MARC detail page for any record
with items. The table of holdings data at the bottom of the page should
be labeled 'Holdings.'
Owen Leonard [Fri, 10 May 2013 12:32:11 +0000 (08:32 -0400)]
Bug 9424: Move JavaScript out of header include
This patch removes JavaScript "onlick" attributes from header.inc and
moves the functionality to staff-global.js. This is in keeping with the
idea of progressive enhancement.
To test, be sure to clear your browser cache after applying the patch.
- Test the help link.
- Test the logout link with the intranetbookbag preference on and off.
- Open a patron's account and click "search to hold." Log out, and log
in again. Koha should not remember the patron you chose before
logging out (as seen from a search results page).
Katrin Fischer [Sun, 19 May 2013 10:16:16 +0000 (12:16 +0200)]
Bug 10284: Add missing spaces between label and content in XSLT view (780/785)
To test:
- Check OPAC and intranet XSLT view for a record that contains
780 and 785 fields.
- Verify there is no space between the label and the content of the
field.
- Apply patch.
- Verify the display both in intranet and OPAC is a little nicer now.
projects / koha.git / log