Jonathan Druart [Wed, 5 Feb 2014 10:05:19 +0000 (11:05 +0100)]
Bug 11689: Take new serial missing statuses into account in more places
Bug 10851 introduced new missing status (codes 41,42,43,44), but in
GetSerials and _update_missinglist, they are not taken into account.
This patch corrects the issue.
To reproduce:
1/ Create a serial with 10 issues.
2/ Set different statuses on each one, with at least 6 missing statuses
(not only "Missing").
3/ Go on the subscription detail page, tab "Summary", the issues with a
new missing status are not listed in the missing issues list.
4/ On the "Issues" tab, all missing are listed (normally only 5 should
be listed.
5/ Apply the patch.
6/ Edit serial (to rewrite the missing list).
6/ Verify that steps 3 and 4 have now correct behavior.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes QA script and tests.
Julian Maurice [Fri, 28 Mar 2014 13:38:25 +0000 (14:38 +0100)]
Bug 12003: Do not calculate next pubdate for irregular subscriptions
Show 'Unknown' when planneddate and publisheddate cannot be calculated
Also fixes SQL query in misc/cronjobs/serialsUpdate.pl that was still
using "periodicity != 32" to exclude irregular subscriptions from
results
Test plan:
1) Create a subscription in the serials module. Make sure to choose:
Frequency = Irregular
2) Test the prediction pattern, first publication date is set to
"First issue publication date" field, others will show as
'unknown'
3) Save the subscription
4) Check the created issue - it will show a published date and a
planned date (same as "First issue publication date" field)
5) Receive the issue and check the next generated issue, planned
date and published date should show as 'Unknown'
6) Generate a next issue, planned date and published date should
also show as 'Unknown'
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested:
- multi receiving generates mulitple issues without dates - 'unknown'
- staff detail page shows the dates empty, which is fine
- OPAC detail page shows the dates empty, which is fine
- serial collection page shows 'unknown' and those issues appear
on the 'manage' tab, as they did in the past
- Editing the issue from the serial collection page leaves the
date fields empty.
- Receving the issue, setting the status to 'Arrived' the Expected on
date is set to 'today' automatically. Date published has to be
entered manually (maybe something we could improve later
- subscription detail > issues tab shows Uknown.
- t/db_dependent/Serials/GetNextDate.t pass.
Bug 12098: (follow-up) put can_show_subscription() into use
This patch puts C4::Serials::can_show_subscription() into use.
Note that there is user-visible change: if a subscription has a
blank library, all users with serials permissions will be able
to view and/or edit it. It remains to be determined whether
we *want* such subscriptions to exist, or if they should only
be tied to specific libraries.
Jonathan Druart [Wed, 16 Apr 2014 14:58:36 +0000 (16:58 +0200)]
Bug 12098: Refactor can_*_subscription in C4::Serials
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested on top of patches for 12048 and 12080.
Subscription search
- superlibrarian, IndyBranches on/off - always sees all subscriptions
- superserials, IndyBranches on/off - always sees all subscriptions
- no superserials, IndyBranches on - only sees own subscriptions
Note: Subscriptions without branches will only show, when all subscriptions
are visible. In a future enh it might be good to enforce setting a
branch, when IndyBranches is used.
- no superserials, IndyBranches off - always sees all subscriptions
Subscription editing
- superlibrarian, IndyBranches on/off - can edit all subscriptions
- superserials, IndyBranches on/off - can edit all subscriptions
- no superserials, IndyBranches on - can only edit own subscriptons and
subscriptions without branch
NOTE: it would make sense to also allow Edit > Edit as new (duplicate)
here, so one can copy the subscription from another branch to modify
it for the own branch.
Passes tests in t, xt and QA script, also newly provided unit tests.
Bug 12080: restore effect of superserials permission
The superserials permission is meant to allow an operator
to see all subscriptions regardless of branch when IndependentBranches
is on without having to have full superlibrarian permissions. This
patch restores this behavior.
TEST PLAN
---------
1) Apply the patch for bug 12048 (as needed -- it may be pushed)
2) Ensure you have two users: superlibrarian, non-superlibrarian
with all access to the staff client except superserials.
3) Ensure you have serials belonging to a different branch than
the non-superlibrarian.
3) Log into staff client as superlibrarian
4) Click 'Serials'
5) Click the 'Submit' button in the search area.
-- note the number of results.
6) Log into staff client as non-superlibrarian
7) Click 'Serials'
8) Click the 'Submit' button in the search area.
-- note the number should be less, note the number.
9) Give the non-superlibrarian superserials access.
10) Home -> Serials
11) Click the 'Submit' button in the search area.
-- the number will still be the same at the one in step #8.
12) Apply the patch
13) Refresh the page
-- the number should now match the one in step #5.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12048: restore ability of superlibrarian to see other libraries' subscriptions
This patch fixes a regression in master and 3.14. When a user has
superlibrian permissions, a search on serials subscriptions should
display other libraries' subscriptions even when IndependentBranches
syspref is enabled.
To reproduce/test the bug/patch:
1. Enable IndependentBranches (i.e. 'Prevent' staff...)
2. Login as a user not having superlibrarian permission
3. Search for a serial subscription on:
/cgi-bin/koha/serials/serials-search.pl
4. Search a title which has at least 2 subscriptions: one in the user
branch, and one in another branch
5. On the result page, just 1 subscription is displayed: the one
attached to the userbranch
=> this is normal
6. Login as a user having superlibrarian permission
7. Repeat step 3-5.
8. You get the same result as 5. You should have seen all subscriptions.
That's what you get after applying this patch.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: I tested a variation. My superlibrarian was a branch that
was not the same as the non-superlibrarian. The serial was
the same branch as the non-superlibrarian. Without the
patch, the superlibrarian saw nothing, with the patch it
saw the serial as expected.
Also, remember the superserials permission can affect the
results. I successfully changed the branch of the
subscription, and then it ceased to show up with
superserials not granted to the non-superlibrarian.
I corrected the system preference name in the text here.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Superlibrarian permission now allows to see all subscriptions
independent from the branch.
Passes all tests and QA script.
But the superserials permission appears broken to me before
and after this patch. If I have superserials - the search
doesn't show all subscriptions. If I don't have superserials
I can still edit any subscription accessing the subscription
detail page through the serial collection page or accessing
the detail page directly by manipulating the URL.
Jonathan Druart [Wed, 3 Jul 2013 08:52:21 +0000 (10:52 +0200)]
Bug 10533: move JavaScript functions for basket groups to a separate file
This patch moves JavaScript functions used for managing basket groups
to a file. This has the effect of putting the last (active) use of
the YUI JavaScript library by the staff interface in one file:
koha-tmpl/intranet-tmpl/prog/en/js/basketgroup.js
Test plan:
- Try all actions for basketgroup ( drag/drop, add, delete, close, print,
reopen, edit, export as csv).
- Check that there is no regression on others acquisition pages:
* acqui/neworderempty.tt
* acqui/uncertainprice.tt
* acqui/addorderiso2709.tt
* acqui/basketheader.tt
* admin/aqbudgets.tt
* admin/aqcontract.tt
* admin/aqbudgetperiods.tt
* admin/aqplan.tt
* suggestion/suggestion.tt
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Frédérick [Tue, 18 Mar 2014 20:11:44 +0000 (16:11 -0400)]
Bug 11955: Remove spaces in empty indicators when linking an authority to a biblio record.
This patch removes spaces in indicators which are imported when we link an
authority to a biblio record. The spaces made the indicators harder to edit
after the linking, because we had to delete the superfluous space character
before a new value could be entered.
To test:
1. Open some authority on editor, save with empty indicators.
They are saved as ind1=" " ind2=" " on auth_header tables, with spaces
2. Edit some record, link some tag with previous auth,
indicators now have a space on it (or ind1 at last)
3. Apply the patch
4. repeat 2, space is gone
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12071: improve generation of Z39.50 search links
This patch fixes two problems with the generation of
links to execute a Z39.50 search from the staff client
catalog and cataloguing search results page.
First, if using URI::Escape 3.30 or earlier, performing a simple search
with a double quote (e.g., "histoire algerie"), the Javascript is broken
in results page because of :
function GetZ3950Terms(){
var strQuery="&frameworkcode=";
strQuery += "&" + "title" + "=" + ""histoire%20algerie"";
Second, the encoding of non-ASCII characters in the search
term was broken.
This patch moves URI escaping from Perl to template with uri TT filter.
Test plan :
- To reproduce the issue with double quotes, the server
must be running URI::Escape 3.30 or earlier; the current
version of URI::Escape properly escapes double quote.
- In staff interface, perform a search with double quotes
that will return no result, ie "aaa xxx"
=> Without patch, javascript is broken
=> With patch, javascript is not broken
- Click on Z3950 button on results page
=> Without patch, the Title input is empty
=> With patch, the Title input contains the search terms
Additional test:
Do a search with something like äöü and then click Z3950
button on results page.
Without patch, encoding is broken in Z3950 form
With patch, encoding is correct.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed a few tabs. Passes tests and QA script.
I can't reproduce the Javascript problem, but I can reproduce
the Z39.50 encoding problem and can detect no regression.
Kyle M Hall [Fri, 15 Nov 2013 16:29:23 +0000 (08:29 -0800)]
Bug 11258: fix another case where holds queue made transfer requests that contradict the library holds policy
This patch fixes a problem where the holds queue generator
was making requests where the pickup library is the
same as the item's library but not the patron's branch,
even if there is a "Default holds policy by item type" rule that states
this item can only fill holds for patrons of the same library as the
item.
Test Plan:
1) Create a test record with 2 items with different itemtypes
2) Set the Default holds policy by item type for the first
item to "From any library"
3) Set the Default holds policy by item type for the second
item to "From home library"
4) Place a record level hold for a patron from another library,
but for pickup at the same library as the item is from
5) Rebuild the holds queue
6) View the holds queue, note the item is listed, though this
patron cannot place a hold on this item
7) Apply this patch
8) Repeat step 5, note the hold is no longer in the queue
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
automated tests pass, functional tests pass. Bug replicated, eradicated by patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I finally managed to reproduce this, patch works as described.
Passes tests and QA script, provided tests fail without patch, but
succeed with the patch.
This patch modifies the patron summary printout so that
only fines with an outstanding balance (either positive
or negative) are displayed. Also, the entire fines section
is displayed only if there is a non-zero balance.
This is consistent with the logic for displaying the loans
and hold requests tables, and avoids cluttering the summary
with historical fines.
Frédérick [Thu, 27 Feb 2014 20:54:01 +0000 (15:54 -0500)]
Bug 11869: Add more informations to the patron account printing page
This patch adds additional informations to the "Print summary"
and the "Print receipt" templates.
Additional information in "Print summary":
* Registration date
* Expiration date
* Library
* Category
* Fines and payments
TEST PLAN
---------
1) Go to a patron.
2) Make sure they have something checked out.
3) Manually add a fine.
4) Under the 'Print' button click 'Print summary'
-- the resulting preview should:
a) have the first for things listed above, and
b) have a new fines and payments section.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: The due date of the check out is not part of this patch,
and so I signed off. Similarly, anything required for
slips is configurable elsewhere now and thus comment 1
does not accurately reflect the intent of this patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described and passes all tests and the QA script.
Owen Leonard [Wed, 9 Apr 2014 16:15:56 +0000 (12:15 -0400)]
Bug 12058: make OverDrive search results page show cart, lists, and login links
The template for OverDrive search results in the Bootstrap OPAC doesn't
show the cart, lists, or login links because the template's checks of
related system preferences relies on [% USE Koha %], which is not
present. This patch adds it.
To test, enable the bootstrap theme and OverDrive integration
(OverDriveClientKey, etc.). Perform a search in the OPAC and click to
view results from your OverDrive library. Confirm that cart, lists, and
login links appear in the header.
Signed-off-by: Jesse Weaver <pianohacker@gmail.com>
Bug confirmed, and this patch fixes it.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 9448: (follow-up) prevent unauthorized operator from bypassing check on forgiving overdue fines
This patch adds a step to verify that an operator has the writeoff
permission before allowing them to forgive overdue fines during
checkin, which was possible if the operator manually added an
"exemptfines" URL parameter.
Bug 9448: (follow-up) tweak description of new permissions
"Fines and fees" is consistent with the description of the
main "updatecharges" permission; in some areas, "charges" by itself
can refer to loans, not fees.
Rephrases permission description a bit to make it clearer and easier to
translate.
Adds German descriptions as requested by katrin.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and all tests.
Tested with various permission combinations:
- superlibrarian
- updatecharges (full permission)
- only 'remaining permissions for updating charges'
It works as expected.
Note: I think we need a follow up to include the
'Forgive overdue charges' checkbox on the check in page
in the new permission.
Kyle M Hall [Thu, 21 Mar 2013 11:18:50 +0000 (04:18 -0700)]
Bug 9448: Add separate permission for writing off fees
Adds new sub-permissions to updatecharges, 'writeoff' for writing off
fees and 'remaining_permissions' for all other fee related activites.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Remove the 'writeoff' permission from your privileges
4) Attempt to write off a fee, you should not be able to
5) Re-add the 'writeoff' permission
6) Attempt to write off a fee, you should now be able to do so
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12079: ensure that CheckReserves() includes reserve_id in its response
This patch modifies _Findgroupreserve so that its one caller,
CheckReserves(), would include the reserve_id field in the
hold request it returns.
Failure to include reserve_id in every circumstance resulted
in bug 11947. This patch is therefore a complementary fix for
that bug, but is not meant to preempt the direct fix for
that bug.
To test:
[1] Verify that t/db_dependent/Reserves.t passes.
[2] Verify that the following test plan taken from
the patch for bug 11947 works for this patch
*without* applying the patch for 11947:
* have a few borrowers, say 4.
* have a biblio with a single item (you can scale this up, it should
work just the same.)
* issue the item to borrower A
* have borrowers B, C, and D place a hold on the item
* return the item, acknowledge that it'll be put aside for B.
* view the holds on the item.
Without the patch:
* the hold priorities in the UI end up being "waiting, 2, 1" when they
should be "waiting, 1, 2".
* in the database "reserves" table, they're really "0, 2, 3" when they
should be "0, 1, 2".
With the patch:
* the hold priorities in the UI end up being "waiting, 1, 2"
* in the database, they're "0, 1, 2"
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors. Test pass
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Mon, 6 Jan 2014 18:46:02 +0000 (13:46 -0500)]
Bug 11484: Add option to cleanup_database.pl to purge Z39.50 search records from reservoir
It would be good to be able to specifically target import records from
Z39.50 for cleanup.
Test Plan:
1) Apply this patch
2) Import one or more batch record sets into Koha
3) Perform some Z39.50 searches
4) Run this command: misc/cronjobs/cleanup_database.pl -v --z3950
5) Verify that only Z39.50 records were deleted
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12081: make tmpl_process3.pl delete ts temp files
This patch enable deletion of temp files used by
tmpl_process3.pl.
Just removed coments on existing code
To test:
1. Do a count of files on /tmp ( ls /tmp | wc -l )
2. Update preferred language
3. Count again, new files on /tmp
4. Apply the patch
5. Update again, check, no new files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: I watched what temp files were actually in /tmp to make
sure other processes didn't magically increase/decrease
the number.
$ perl translate update {lang code}
generated 10 temporary files for me (2x5 po files). After
removing those ten files, and applying the patch, no
other files were generated.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
These lines has been commented by commit a399dcefad193fc21ef2dc1fe31d07686ab2da46 without any apparent good
reason.
Pasi Kallinen [Wed, 29 Jan 2014 07:37:18 +0000 (09:37 +0200)]
Bug 11630: improve parsing of age restriction markers
This patch makes the parsing of AgeRestrictionMarker values consider
the case where the marker is immediately followed by the age, e.g.
"K16" in Finland.
How I tested:
[1] Configure Age Restricition (see Syspref AgeRestrictionMarker) and
have a biblio record with e.g. PEGI 99 in age restriction field.
[2] Try to check out to a patron with age < 99
[3] Check out should be blocked
[4] Change entry in age restriction field to PEGI99
[5] Checkout should be possible
[6] Apply patch
[7] Checkout schould now be blocked
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Wed, 9 Apr 2014 08:24:24 +0000 (10:24 +0200)]
Bug 12052: New syspref to display message on the OPAC patron summary page
Test plan:
Fill the OPACMySummaryNote with HTML code or just text.
The content should be displayed at the OPAC on the summary page for
patrons.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Rephrased the pref text a little bit, using 'logged in' instead of
'connected', also added " so the description appears correctly in the
pref editor.
Mason James [Mon, 16 Sep 2013 03:12:16 +0000 (15:12 +1200)]
Bug 10825: don't display enum/chron twice for items received via the serials module
TEST PLAN
---------
1) In the staff interface, display a bib that has one or more items
that were received in the serials module. The following query
can identify them:
-- in MySQL:
SELECT items.biblionumber,items.enumchron,serial.serialseq
FROM items,serial,serialitems
WHERE items.itemnumber=serialitems.itemnumber
AND serialitems.serialid=serial.serialid;
2) Note that in the holdings tab, the serial enumeration/chronology
is displayed twice.
3) Apply the patch
4) Refresh the screen
4) Now, the enum/chron should be displayed only once per item.
Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Template change only.
Mark Tompsett [Thu, 6 Mar 2014 06:29:39 +0000 (01:29 -0500)]
Bug 11797: fix odd number of elements in hash warning (MARC21)
This was discovered when someone triggered an authority search
on an authority record that was missing what is assumed the
default subfield for a given field.
It, however, also can be triggered in an OPAC authority search
by looking at the record that lacks the default subfield for a
given field.
TEST PLAN
---------
1) Create an authority record with 180$x and NOT 180$v.
See C4::AuthoritiesMarc::BuildSummary in the 1.. foreach loop
for known tags and default values. The default subfields are
the first letter of the $subfields_to_report string.
2) Trigger the bug:
Method 1: /cgi-bin/koha/opac-authoritiesdetail.pl?authid=#
Where # is the authority id of your tweaked record.
The error occurs in Normal view.
Method 2: Home -> Cataloging -> + New record
-> Click the 'Tag Editor' on 100$a
Editing of $a to $b and back may be required.
3) Notice there is an error log entry.
4) Apply the patch
5) Attempt to trigger the bug again
6) That specific error log entry is not generated.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Could generate the warning with a missing 151$a with both methods.
No warning anymore after applying this patch.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds unit tests for C4::AuthoritiesMarc::BuildSummary
for both UNIMARC and MARC21 and a regression test for the "Odd
number of elements in anonymous hash" warning.
To test:
[1] Run prove -v t/db_dependent/AuthoritiesMarc.t. It should
report one failure.
[2] Apply the main patch.
[3] Run t/db_dependent/AuthoritiesMarc.t again; it should pass.
Bug 5052: make it possible to pick a language if all choices are sublanguage
This was tricky to catch. In current implementation, Bug 6755
introduced in C4/Templates.pm as condition to send the array of
hashrefs of languages that (@$languages_loop<2), but with one
language group that condition is false, there is only one
element in that array.
This patch changes that condition to have more than one language
selected, grouped or not.
Also send $bidi value always, that was only sent if there is
more than one group language.
To test:
1. Translate to en-GB and en-NZ, or simply do mkdirs
on intranet-tmpl/prog and opac-tmpl/bootstrap
2. Go to Administration > System preferences > I18N
enable those languages on staff/opac
3. Check that language chooser is nowhere to be found
4. Apply the patch
5. Reload staff/opac, now you can see language chooser
NOTE: I made little changes on staff, but can't replicate
bootstrap colors for selected/unselected language. Someone
need to touch css files to make it happen. But that is
current behavior.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Good catch!
Robin Sheat [Mon, 17 Mar 2014 05:33:00 +0000 (18:33 +1300)]
Bug 11947 - renumber reserves when hold is confirmed
Currently when a reserve is moved to "waiting" status because it's
acknowledged on checkin, the reserve priorities aren't renumbered. This
causes things to go a bit haywire in the UI, in particular, some
reserves can unjustly end up with priority 1 when they shouldn't. It
also seemed to mess with the logic of who should get it next, but I
didn't look too closely at that.
This patch forces a renumbering so that all the priorities remain
copacetic.
Test plan:
* have a few borrowers, say 4.
* have a biblio with a single item (you can scale this up, it should
work just the same.)
* issue the item to borrower A
* have borrowers B, C, and D place a hold on the item
* return the item, acknowledge that it'll be put aside for B.
* view the holds on the item.
Without the patch:
* the hold priorities in the UI end up being "waiting, 2, 1" when they
should be "waiting, 1, 2".
* in the database "reserves" table, they're really "0, 2, 3" when they
should be "0, 1, 2".
With the patch:
* the hold priorities in the UI end up being "waiting, 1, 2"
* in the database, they're "0, 1, 2"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan confirms that the problem exists and that the patch corrects
it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, especially t/db_dependent/Reserves.t.
Improves priority calculation.
Owen Leonard [Fri, 11 Apr 2014 16:40:20 +0000 (12:40 -0400)]
Bug 12075: fix keyboard shortcuts broken by jQueryUI upgrade
The recent jQueryUI upgrade broke keyboard shortcuts in the staff client
because of changes to the jQueryUI API. This patch fixes the problem.
To test, apply the patch and clear your browser cache if necessary.
- View any page in the staff which includes header search tabs for check
out, check in, or catalog search (staff client home page or
circulation page for instance).
- Test the keyboard shortcuts: Alt-q for catalog search, Alt-u for check
out, Alt-r for check in.
- Each keyboard shortcut should select the correct tab.
Followed test plan, patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Confirmed that the shortcuts were broken before the patch
and now work again after applying it.
Fridolin Somers [Mon, 24 Feb 2014 11:15:55 +0000 (12:15 +0100)]
Bug 11846: Correct database update for restrictions with date 9999-12-31
The borrowers with indefinite restrictions have borrowers.debarred with '9999-12-31'.
Database update for this bug contained :
INSERT INTO borrower_debarments ( borrowernumber, expiration, comment )
SELECT borrowernumber, debarred, debarredcomment FROM borrowers WHERE debarred IS NOT NULL
For borrowers where borrowers.debarred is '9999-12-31', this value
is copied into borrower_debarments.expiration.
This is not correct because borrower_debarments.expiration must be
NULL for indefinite restrictions.
This patch corrects update 3.13.00.035 and also adds an update for
databases already updated.
Test plan :
- Use a database with version 3.13.00.000
- Set a borrower as restricted for ever (leave until empty)
- Use sources to master + patch
- Perform updatedatabase
- Look at borrower details, tab "Restrictions"
=> Without patch, you see Expiration 31/12/9999
=> With patch, you see Expiration Infinite
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I tested both DB revisions by resetting Version of my database (and
adding a SetVersion after the revised older dbrev). This was possible
since the debarred field still exists in borrowers. (I have my doubts
about that, but that goes outside the scope of this report.)
Also note that routine _UpdateBorrowerDebarmentFlags puts back 9999-12-31
into borrowers for indefinite restrictions (which looks not very consistent).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12073: don't show link URLs when printing Bootstrap OPAC detail page
On OPAC Bootstrap detail page, by clicking Print link on the right the
page is printed. But the printed page contains HTML <a> anchors URL
attribute. It's useless, and unreadable. It isn't the case with prog
theme.
This patch hides all <a> href attributes when printing any OPAC page.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and improves the printed detail page's readability.
Currently there is no less file for the print.css.
Owen Leonard [Thu, 10 Apr 2014 19:50:40 +0000 (15:50 -0400)]
Bug 12069: redirect to staff login if you access members/mod_debarment.pl when logged out
members/mod_debarment.pl's call to checkauth should pass 'intranet' so
that if the user happens to be logged out they will be redirected to the
staff client login form, rather than the OPAC.
To test, apply the patch and log in to the staff client:
- Add a restriction to a patron's account.
- View the restrictions tab on the patron's account. You should see the
restriction and a "Remove" link for that restriction.
- In another tab, log out of the staff client.
- In the first tab, click the "Remove" link. You should be redirected to
the staff client login page.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Good catch! Works as described, passes all tests and QA script.
Bug 12076: better detect an untranslatable template construct
Per bug 6458, template constructs of the form
<li [% IF (foo) %]selected="selected"[% END %]...
are forbidden as they can cause problems with translated templates.
However, the tt_valid.t test currently doesn't catch the variation
where '-' is used to suppress extra whitespace:
<li [%- IF (foo) -%]selected="selected"[%- END -%]...
This patch corrects the issue.
To test:
[1] Temporarily add the following line to a template file:
<li [%- IF a -%]a="a"[%- END -%] />
[2] Run prove -v xt/tt_valid.t. Note that no error is reported.
[3] Apply the patch, and rerun the tt_valid.t test. This time,
an error should be reported.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well, detects the forbidden pattern
No koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Kyle M Hall [Fri, 7 Mar 2014 14:05:31 +0000 (09:05 -0500)]
Bug 11563: (follow-up) add noEnterSubmit class to pulldowns
When using Chrome on Mac OS X, form submits are triggered by hitting
enter when focused on a select. This is not an issue with any other
combination of browser and operating system that I am aware of.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fridolin Somers [Tue, 25 Feb 2014 11:13:13 +0000 (12:13 +0100)]
Bug 11563: restore preventing the enter key from submitting several forms
Several forms that take patron or item barcodes as input stopped
preventing the enter key (which is often sent by barcode scanners)
from submitting the form.
The code binding the CSS class noEnterSubmit to the handler preventing
submission when hitting the enter key was no longer triggered. This is
because this class is added using JavaScript in $(document).ready() and
the keypress event listerning is also set using $(document).ready().
This patch corrects by using JQuery live() with will set event handlers
for HTML generated with JavaScript.
Also sets noEnterSubmit to use the checkEnter(e) function, as that has
broader browser compatibility. Also corrects a small bug, for IE,
window.event must be used, not event alone.
Test plan :
- Flush browser cache (Crtl+F5) to update js files
- Go to patron creation : members/memberentrygen.tt
- Type a text in all mandatory inputs
- Type some caracters in a non mandatory input
- Press Enter key
=> Without patch : the form is submitted
=> With patch : the form is not submitted
- Try to set several lines in a textarea
=> It works (checks that in this case enter key is allowed)
- Test other pages usign noEnterSubmit class :
cataloguing/additem.tt
course_reserves/course.tt
members/mancredit.tt
members/maninvoice.tt
patron_lists/list.tt
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested in Firefox and Chromium.
Passes tests and QA script.
Jonathan Druart [Wed, 19 Mar 2014 15:38:20 +0000 (16:38 +0100)]
Bug 11960: replace unnecessary call of GetMemberDetails by CanBookBeRenewed
C4::Circulation::CanBookBeRenewed called C4::Members::GetMemberDetails to
retrieve categorycode and branchcode.
- categorycode is used to retrieve the issuing rule
- the borrower information is passed to
C4::Circulation::_GetCircControlBranch. Which only uses the branchcode
parameter.
GetMemberDetails does a lot of calls/queries (patronflags,
account, etc.) that are not needed by CanBookBeRenewed.
This patch replaces it with a call to C4::Members::GetMember.
Note: I presented this small optimisation during a quick introduction to
NYTProf (hackfest 14 in Marseille).
Test plan:
- launch member unit tests
- check the code
Checking the code resulted in the following:
CanBookBeRenewed builds a hash reference from the borrowernumber
(2482). Note it is only used in this function and not passed in.
_GetCircControlBranch (2485) requires that hashreference to
have a branchcode key. As stated above.
The following line (2486) requires it have a categorycode key.
As such, C4::Members::GetMemberDetails is confirmed to be
overkill, and C4::Members::GetMember is sufficient.
Testing Done
------------
0) Back up DB
1) Make sure MPL is in the list of libraries.
2) Apply the patch.
3) run the koha qa test tool
4) prove -v t/db_dependent/Circulation.t
Patch applies cleanly. QA Test tool was all OK. All tests ran successfully.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Kyle M Hall [Wed, 22 Jan 2014 14:50:16 +0000 (09:50 -0500)]
Bug 11598: Add --text option to overdue_notices similar to --html option
We have a number of reports of libraries that were upset by Bug 10720
being fixed! These libraries preferred this single file output, but as
text only. We should bring back this behavior, but as a feature, not a
bug.
Test Plan:
1) Apply this patch
2) Run overdue_notices.pl --html
3) Note the output is wrapped in html tags
4) Run overdue_notices.pl --text
5) Note the same output, but not wrapped in html tags
Signed-off-by: wajasu <matted-34813@mypacks.net> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
To test, add the -n parameter.
The filename generation could be refactored but not blocker.
Bug 12040: Add 3 parameters to runreport.pl for SMTP authentication
This patch adds three optional parameters to runreport.pl
to allow authentication with the SMTP server.
--username -> Username to pass to the SMTP server for
authentication
--password -> Password to pass to the SMTP server for
authentication
--method -> Method is the type of authentication.
Ie. LOGIN, DIGEST-MD5, etc.
Test Plan
---------
As for testing manually using a Gmail account:
1. Set up your sendmail as shown in
misc/cronjobs/CONFIGURE.gmail
2. Before applying this patch, run misc/cronjobs/runreports.pl
on your favorite report including the proper email parameters
against your gmail account.
3. Note the failure message stating the authentication
requirement.
4. Apply this patch, and return the script including the
additional parameters and specifying "LOGIN" for the method.
5. Note the successful send.
6. perldoc misc/cronjobs/runreport.pl
7. Run the koha qa test tool.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 11441: enhance remove_unused_authorities.pl ability to select records
remove_unused_authorities.pl previously required that --aut be supplied
to specify one or more authority types to check for unlinked authority
records. If --aut was omitted, it would default to search for
records of authority type NC, which is not present in many (or any?)
Koha databases.
Now, if --aut is omitted, unlinked authority records of any type
are removed.
To test it:
Parse only PERSO_NAME authorities:
misc/migration_tools/remove_unused_authorities.pl -aut PERSO_NAME
Parse all authorities:
misc/migration_tools/remove_unused_authorities.pl
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Mon, 24 Mar 2014 14:25:05 +0000 (15:25 +0100)]
Bug 11995: restore ability of serialsUpdate.pl to calculate next serial issue dates
Bug 7688 changed the prototype for GetNextDate, but the serialsUpdate.pl
cronjob script had not been updated. This patch fixes the problem.
Test plan:
Before applying the patch:
1/ Check that the following SQL query returns something:
SELECT serial.*
FROM serial
LEFT JOIN subscription ON (subscription.subscriptionid = serial.subscriptionid)
WHERE serial.status = 1
AND DATE_ADD(planneddate, INTERVAL CAST(graceperiod AS SIGNED) DAY) < NOW()
AND subscription.closed = 0;
2/ Run misc/cronjobs/serialsUpdate.pl -v
It should die with an error message like this:
Can't use string ("2011-03-05") as a HASH ref while "strict refs" in use
3/ Apply the patch
4/ Run misc/cronjobs/serialsUpdate.pl -v
It should exit normally and print messages like this:
Serial issue with id=XX updated
5/ Run the Koha QA test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Thu, 27 Feb 2014 09:16:21 +0000 (10:16 +0100)]
Bug 7267: Add account number to German PDF template
To test:
- Switch system preference OrderPdfFormat to pdfformat::layout2pagesde
- Create one or more baskets with some orders each.
- Add all baskets to one basket group
- Print the basket group
- Check the account number from your vendor shows up with the other
vendor details
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Thu, 27 Feb 2014 09:13:33 +0000 (10:13 +0100)]
Bug 7267: Add account number to English PDF templates
To test:
- Switch system preference OrderPdfFormat to pdfformat::layout2pages
- Create one or more baskets with some orders each.
- Add all baskets to one basket group
- Print the basket group
- Check the account number from your vendor shows up with the other
vendor details
- Repeat with pdfformat::layout3pages
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Thu, 27 Feb 2014 09:17:44 +0000 (10:17 +0100)]
Bug 7267: Add account number to French PDF template
To test:
- Switch system preference OrderPdfFormat to pdfformat::layout3pagesfr
- Create one or more baskets with some orders each.
- Add all baskets to one basket group
- Print the basket group
- Check the account number from your vendor shows up with the other
vendor details
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Sat, 1 Mar 2014 08:33:27 +0000 (09:33 +0100)]
Bug 11828: (follow-up) add new option to OrderPdfFormat
To test:
- Check appearance of the OrderPdfFormat system preference
It will offer a pull down with options, including
"German 2-page"
Followed test plan. Patch behaves as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Katrin Fischer [Wed, 26 Feb 2014 16:50:10 +0000 (17:50 +0100)]
Bug 11828: Add German translation of layout2pages PDF template
To test:
- Switch system preference OrderPdfFormat to pdfformat::layout2pagesde
- Create one or more baskets with some orders each.
- Add all baskets to one basket group
- Print the basket group
- Check everything is translated into German and the formatting/layout
looks ok
Followed test plan and compared English with German printout.
German version is OK.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mark Tompsett [Thu, 3 Apr 2014 00:22:44 +0000 (20:22 -0400)]
Bug 11885: (follow-up) make default styling consistent with previous look
Jonathan Druart raised the following three issues:
1/ subtags was bold before patch
2/ 1 dash existed between tag and tag name
3/ A space has been added ("606 #1 - Sujet nom commun"
becomes "606 # 1 Sujet nom commun", "101 ## - Langue"
becomes "101 # # Langue")
This patch addresses them in the following way:
1/ You will note that @ was not bold on the 0 tab.
Every other tab were bold. By making the similar template
into a procedure based on the 0XX tab, bolding was lost.
This patch bolds all subtags including the @, so that
the visible change is minimized.
2/ The dash was programmatically added in at the code stage
previously. This bug fix splits the the single concatenation
mess into parts which can be styled. This puts the dash back
into the template. However, it should be noted that the
spacing for the 0 tab's tag and tag description will have an
extra space after the hypen that was lacking before.
3/ <span>...</span><span>...</span> is different than
<span>...</span>
<span>...</span>
The later puts that extra space. This patch fixes that.
See comment 1 for the test plan.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described.
Small koha-qa errors fixed in followup
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Pasi Kallinen [Tue, 4 Mar 2014 06:57:11 +0000 (08:57 +0200)]
Bug 11885: fix inconsistent HTML in MARC Details
In Catalog > MARC Details, the HTML in the different tabs is slightly
inconsistent and doesn't differentiate different elements, making CSS
styling complicated or impossible:
* tab 0 has <p class="subfield_line"> whereas all the other tabs
have just <p>
* all other tabs wrap the subfield character in <b> tags, except
for tab 0
* the MARC tag title is a single div with the tag, the indicators
and the field description.
Attached patch folds all the tab outputs into a single TT BLOCK,
which is then reused. It also marks the separate parts of the tag
title in their own spans.
The output should be nearly identical to previous behaviour, minus
a dash from the tag title descriptions - it was used to separate
the tag from the description. The description can now be styled
separately from the tag itself, so the dash can be added with CSS,
if necessary.
Revised test:
1) Find a biblio
2) Edit the record so that there is something in every tab (0-9).
3) Save and then click 'MARC' in the left pane to view the
MARC details.
4) Note the contents of each tab.
5) Apply patch
6) Compare the MARC details output to what was noted. Should
be the same, minus a dash in each of the tag title descriptions.
Signed-off-by: Pasi Kallinen <pasi.kallinen@pttk.fi> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If you have search suggestions enabled in the OPAC and click the "Check
for suggestions" link before it is replaced with the JS-rendered output
you will get a template error. This patch corrects it.
To test you must have the bootstrap theme enabled and at least one
OPAC plugin enabled in Administration -> Did you mean?
- Perform a search in the OPAC.
- Look for a box which says "Not what you expected? Check for
suggestions"
- Click the "Check for suggestions" link before it disappears. If
necessary disable JavaScript in your browser so that the link doesn't
disappear.
- The search suggestions page should render without errors.
Signed-off-by: A. Sassmannshausen <alex.sassmannshausen@ptfs-europe.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The non-Javascript fallback link now works correctly.
Passes tests and QA script.
Srdjan [Fri, 1 Nov 2013 08:24:11 +0000 (21:24 +1300)]
Bug 11184: correct attribute cloning for the patron editor
This patch fixes Perl warnings logged when setting up the
patron attribute form in the patron editor.
To test - Patron details entry page:
* Have ExtendedPatronAttributes enabled. Check that "Additional
attributes and identifiers" section behaves.
* Verify that editing and saving a patron record does not
result in the following sorts of entries in the Apache log:
se of uninitialized value $_ in hash element at memberentry.pl line 798
Use of uninitialized value in anonymous hash ({}) at memberentry.pl line 798
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with different types of patron attributes:
- repeatable
- linked to an authorized value
- free text
Tested editing, adding, removing one of multiple, adding multiple,
etc. No regressions found.
Passes all tests and QA script.
Owen Leonard [Wed, 9 Apr 2014 16:41:24 +0000 (12:41 -0400)]
Bug 10865: (Follow-up) Add CSS style for form hints
This patch adds a new "hint" class for displaying information relating
to a form field. On the list edit screen the hint also has an alert
class to highlight it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Works as advertised.
Tested with Bootstrap and prog theme. Some notes:
- When OpacAllowPublicListCreation is turned off, the permissions
don't show.
- When OpacAllowPublicListCreation is turned off, we could also hide
the Category pull down in the [new list] pop up, as there is only
Private left as an option.
- Maybe we should move the new list link outside of the tabs?
When OpacAllowPublicListCreation is turned off, but public lists
exist, the link 'new list' will still show on the public list tab,
but a private list will be created.
Galen Charlton [Fri, 21 Feb 2014 20:44:24 +0000 (20:44 +0000)]
bug 10865: (follow-up) allow patrons to make their public lists private when OpacAllowPublicListCreation is off
This patch ensures that patrons continue to have the ability to make
their public lists private for any public lists they control that were
created before the library turned the OpacAllowPublicListCreation
system preference off.
To test:
[1] Ensure OpacAllowPublicListCreation is on.
[2] As a patron, create a public list in the OPAC. Also, create
a private list.
[3] Turn OpacAllowPublicListCreation off.
[4] Back in the OPAC, verify that the public list can be edited
and that there are drop-downs for category and permissions.
Also verify that there is a warning that the patron cannot
change it back if they convert a public list to private.
[5] Edit the private list created in step 2. Verify that the
category and permissions drop-downs are not displayed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Broust <jean-manuel.broust@univ-lyon2.fr> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Owen Leonard [Fri, 13 Sep 2013 14:50:27 +0000 (10:50 -0400)]
Bug 10865: Don't show list permissions when adding public lists/sharing lists is not allowed
If patron creation of public lists is disallowed by the
OpacAllowPublicListCreation system preference the "category" option
should be hidden altogether instead of showing a <select> with "private"
as the only option. This patch hides category and permissions controls
when OpacAllowPublicListCreation is set to "don't allow."
To test you must have the virtualshelves system preference enabled.
Apply the patch and log into the OPAC. Test:
- With OpacAllowPublicListCreation enabled, create a new list. You
should see options for setting category and permissions. Saving the
new list should complete correctly and save the right settings.
- With OpacAllowPublicListCreation enabled, edit an existing list. You
should see the same options and saving your changes should work
correctly.
- With OpacAllowPublicListCreation disabled, create a new list. You
should only see fields for title and sort. Saving this list should
complete correctly and save the right settings.
- With OpacAllowPublicListCreation disabled, edit an existing list. You
should be able to edit only title and sort settings. Saving your
changes should work correctly.
Repeat your tests for both prog and bootstrap themes.
Revision: Existing public lists can be edited and retain their public
status even if OpacAllowPublicListCreation has since been disabled. This
preserves the behavior previous to this patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This patch fixes a big ergonomic issue.
Note: to me, the "New list" action should be outside the tabs.
It is confusing to have a "new list" into the public lists tab when it
is not possible to create new public lists.
Owen Leonard [Wed, 9 Apr 2014 13:08:27 +0000 (09:08 -0400)]
Bug 12056: fix untranslatable strings in calendar
In the calendar there are some strings in a JavaScript function which
are not properly wrapped in a function for translation. This patch
corrects this.
This patch also corrects some minor validation issues and spelling and
grammar issues, including those covered by Bug 12055.
To test, apply the patch and view the calendar in Tools -> Calendar.
When you hover your mouse over a day in the calendar you should see a
title tooltip indicating what kind of day/holiday it is and showing the
title of the holiday, if any.
To test that the strings are now being picked up for translation,
run translate update on a po file and confirm that the affected strings
are now present: "Weekly holiday," "Yearly holiday," etc.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well. New strings on translation file. No koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Mark Tompsett [Wed, 9 Apr 2014 18:34:21 +0000 (14:34 -0400)]
Bug 12060: remove extraneous tags from header.inc
By correcting the indentation, it became more apparent the two
markup errors (stray </li> and </div> tags) that were generated
by pasting the page source of
PROTOCOL://STAFFCLIENT/cgi-bin/koha/tools/holidays.pl
into http://validator.w3.org/check
TEST PLAN
---------
1) Home -> Tools -> Calendar in the staff client
2) In another tab open http://validator.w3.org/check
3) Select Validate by Direct Input
4) In the staff client, view the page source
5) Copy the page source to the Validation text box in the
other tab.
6) Click the 'Check' button.
-- There will be 3 errors.
7) Apply the patch.
8) Refresh the staff client page.
9) Copy the revised page source into the validation text box.
10) click the 'Check' button.
-- There will be 1 error.
11) Run the koha qa test tool.
NOTE: This error is not in the intended file to fix. Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
git diff --color -w HEAD^ reveals, that only a </li> and a </div>
are removed by this patch, all other changes are whitespace.
Passes all tests and QA script.
Owen Leonard [Mon, 10 Feb 2014 17:26:34 +0000 (12:26 -0500)]
Bug 11734 - Use new DataTables include in batch modification templates
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to the
batch modification and batch deletion pages.
Minor text changes: Corrected capitalization.
Apply the patch and test the following:
- On batch modification and batch deletion, submit multiple barcodes or
item numbers. On the results page the title column has been configured
to use the "anti-the" filter to exclude articles from sorting. Sorting
on all columns should work correctly.
Edit: Put back checkboxes plugin which was accidentally removed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Owen Leonard [Fri, 7 Feb 2014 19:06:50 +0000 (14:06 -0500)]
Bug 11711 - Use new DataTables include in circ templates
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to all
circ-related pages which use DataTables.
Apply the patch and test the following pages to confirm that table
sorting works correctly:
- Circulation
- The UseTablesortForCirc system preference must be enabled.
- Check out to a patron with existing checkouts. Choose a patron who
is a guarantor to another patron with checkouts in order to test the
relatives' checkouts table.
- The checkouts and relatives' checkouts tables have been modified to
exclude articles when sorting of titles.
- Hold ratios - The title column has been configured to exclude articles
from sorting
- Transfer to receive
- Holds queue
- The title column has been configured to exclude articles when
sorting
- The date column has been modified to use the title-string filter for
sorting. An unformatted date is now passed from C4::HoldsQueue.pm to
the template, where the KohaDates filter is used for formatting.
Sorting is based on the unformatted date.
- Holds awaiting pickup
- The "available since" column has been configured for sorting on an
unformatted date. waitingreserves.pl now passes the unformatted
date to the template, and formatting is done using the KohaDates
filter.
- The title column has been configured to exclude articles when
sorting.
Edit: Rebased on current master following commit of Bug 11605 Signed-off-by: A. Sassmannshausen <alex.sassmannshausen@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Marcel de Rooy [Thu, 27 Feb 2014 08:12:25 +0000 (09:12 +0100)]
Bug 11855: Tiny code cleanup in members
[1] Template variable actionname is not used in the associated
template. This could be a copy-paste from serials/member-search.pl.
Consequently, the module is no longer needed in member.pl. Template
members/search.tt still contains actionname; it seems that this
emplate is not used too.
[2] $template_name not used in members-home.pl.
Test plan:
[1] Go to Patrons. If you reach that page, you tested members-home.pl
[2] Add a new patron.
[3] Search for a patron. Edit one.
Followed test plan. No problems found. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jesse Weaver [Thu, 20 Mar 2014 17:20:40 +0000 (11:20 -0600)]
Bug 11978 - Fix URLs displayed in OverDrive search
OverDrive has recently changed its APIs to include "http://" in the URLs
it returns. This patch removes the "http://" on the Koha end so they
aren't doubled.
Test plan:
1. Run an OverDrive search on the OPAC.
2. Check the links, they should start with "http://http://"
3. Apply this patch.
4. Rerun the search, the links should now be correct.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I can reproduce the problem and confirm that this patch fixes it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch removes hardcoded http:// from URLs in the Overdrive code.
Trusting Jesse and Owen to have tested this with Overdrive,
code review reveals no additional changes or possible problems.
Bug 9075: Rename "type" to "material type" on OPAC XSLT detail and results
The label Material type better describes what the icon presents.
It is based on leader values of the MARC record.
Revised Test Plan
-----------------
1) In the staff client, set the OPAC system preference
OPACXSLTDetailsDisplay to 'default' and save.
2) In the staff client, set the OPAC system preference
OPACXSLTResultsDisplay to 'default' and save.
3) In the staff client, set the OPAC system preference
opacthemes to 'bootstrap' and save.
4) In the OPAC, search for biblio used in previous patch testing.
-- It should display "Type:"
6) Look at the biblio details
-- It should also display "Type:"
7) In the staff client, set the OPAC system preference
opacthemes to 'prog' and save.
8) In the OPAC, search for biblio used in previous patch testing.
-- It should display "Type:"
9) Look at the biblio details
-- It should also display "Type:"
10) Apply the patch
11) In the staff client, set the OPAC system preference
opacthemes to 'bootstrap' and save.
12) In the OPAC, search for biblio used in previous patch testing.
-- It should display "Material type:" this time.
13) Look at the biblio details
-- It should display "Material type:" this time.
14) In the staff client, set the OPAC system preference
opacthemes to 'prog' and save.
15) In the OPAC, search for biblio used in previous patch testing.
-- It should display "Material type:" this time.
16) Look at the biblio details
-- It should display "Material type:" this time.
17) Run the koha qa test tool.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Note: Just a simple string change. Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
String change, works as advertised in staff, prog and bootstrap
OPAC.
Bug 9075: Rename "type" to "material type" on staff XSLT detail and results
The label Material type better describes what the icon presents.
It is based on leader values of the MARC record.
Revised Test Plan
-----------------
1) Set the Staff system preference XSLTDetailsDisplay to
'default' and save.
2) Set the Staff system preference XSLTResultsDisplay to
'default' and save.
3) Click 'Search the catalog' tab in the search area.
4) Search for something
5) Look for a biblio that has 942$c set to some type.
-- It should display "Type:"
Or take a result and modify it to have a 942$c.
6) Look at the biblio details
-- It should also display "Type:"
7) Apply the patch
8) Search for the same biblio again.
-- It should display "Material type:" this time.
9) Look at the biblio details
-- It should display "Material type:" this time.
10) Run the koha qa test tool.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Note: This is a simple string substitution. Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 7413: (follow-up) tweak description of the AllowRenewalLimitOverride syspref
As it happens, the AllowRenewalLimitOverride serves to both allow
operators to override renewal blocks when the renewal exceed the
maximum renewal count or when the renewal is premature. This
patch adjust the wording to reflect the expansion in meaning; if
it turns out that folks want to distinguish between overriding the
maximum renewal count and overriding premature renewals, a new
system preference can be added later.
Bug 7413: (follow-up) teach renew interface about too_soon
This patch ensures that the new staff interface for renewals
recognizes when premature renewals are requested. If the
AllowRenewalLimitOverride system preference is enabled, staff members
are able to override the block:
To test:
[1] Set up a loan policy with a "no renewal before" value and
check out an item.
[2] In the renewal page, verify that attempting to renew the loan
results in an error forbidding the renew.
[3] If AllowRenewalLimitOverride is enabled, the operator should
also be given the option to override the block.
Bug 7413: (follow-up) improve return of GetSoonestRenewDate()
This patch modifies GetSoonestRenewDate() so that it returns
undef if the patron, item, or loan cannot be found. This
better reflects the usage of this routine GetSoonestRenewDate(),
as none of its callers tried to check the second return
value containing an error code.
This patch ensures both both '0' and strings consisting of zero
or more blanks are recognized by the circ rules editor as specifying
clearing the "no renewal before" value. Concretely, this fixes
warnings of the following form when clearing this field:
Holger Meißner [Fri, 14 Feb 2014 09:01:19 +0000 (10:01 +0100)]
Bug 7413: Unit test
This patch makes the new parameter norenewalbefore known to
unit test Circulation_Issuingrule.t.
To test:
1) Before applying the patch:
prove t/db_dependent/Circulation_Issuingrule.t
2) Notice that the test fails with:
$got->{norenewalbefore} = undef
$expected->{norenewalbefore} = Does not exist
3) Apply the patch.
4) Run test again and it should pass.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Holger Meißner [Fri, 14 Feb 2014 08:11:19 +0000 (09:11 +0100)]
Bug 7413: OPAC bootstrap theme changes
This patch makes opac-user.pl and the bootstrap version of opac-user.tt
handle the new renewal error "too_soon".
To test:
1) Set global syspref "opacthemes" to bootstrap.
2) Set global syspref "OpacRenewalAllowed" to Allow.
3) Test the same things as in previous patch, this time for the OPAC
summary page.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Holger Meißner [Thu, 13 Feb 2014 16:05:08 +0000 (17:05 +0100)]
Bug 7413: Code and intranet template changes
This patch modifies CanBookBeRenewed, so that based on
issuingrules.norenewalbefore a new error "too_soon" can be returned.
Also adds a new subroutine GetSoonestRenewDate.
To test:
1) Create an issuing rule with "No renewal before" set to value X
and "Unit" set to days.
2) Test the following steps for both:
Home > Patron > Patron details
Home > Circulation > Checkouts
3) On the checkout page, test for today's issues as well as previous
issues. (Check something out on one day and something else on the
next day, then do the testing.)
4) Confirm that items can't be renewed if current date is more than
X days before due date.
5) Confirm that the date and time of the soonest possible renewal are
displayed in the format specified by global sysprefs "dateformat"
and "TimeFormat".
6) Confirm that items can be renewed if "No renewal before" is
undefined or current date is X or less days before due date.
7) Confirm that if the number of allowed renewals is exceeded
"Not renewable" is displayed, no matter what "No renewal before"
is set to.
8) Test the same things with "Unit" set to hours.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Holger Meißner [Wed, 12 Feb 2014 16:16:40 +0000 (17:16 +0100)]
Bug 7413: Add "No renewal before" to the circulation and fine rules
This patch adds a column "No renewal before" to the circulation and
fine rules table.
To test:
1) Add or edit some issuing rules.
2) Confirm that an empty entry, zero and non-numerical values for
"No renewal before" are saved as undefined.
3) Confirm that numerical values can be entered and saved.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Holger Meißner [Wed, 12 Feb 2014 15:53:06 +0000 (16:53 +0100)]
Bug 7413: Add issuingrules.norenewalbefore to database
Currently multiple renewals can be done in immediate succsession.
To optionally prevent this, a new parameter "No renewal before"
is introduced.
This patch adds issuingrules.norenewalbefore to the database.
Default value is NULL.
To test:
1) Run installer/data/mysql/updatedatabase.pl
2) Create a SQL report like:
SELECT * FROM issuingrules
3) Confirm that norenewalbefore was added after renewalperiod.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Bug 7567: (follow-up) make tests of get_opac_new more readable
This patch updates two of the tests cases to directly compare
the results returned by get_opac_new with the expected value
by using is_deeply(). Consequently, it removes the use of magic
numbers (which do not stop being magic numbers if they're wrapped
in constants named F1, F2, etc.).
To test:
[1] Verify that prove -v t/db_dependent/NewsChannels.t passes.
This follow-up corrects a JavaScript error by converting the sorting
configuration to be class-based
(http://wiki.koha-community.org/wiki/DataTables_HowTo#Sorting_dates_regardless_of_date_format_preference).
I have also changed the DataTables configuration to allow for pagination
and JS-based filtering.
To test, apply the patch and view the list of News items. Your browser
should report no JavaScript errors. Table sorting, pagination, and
filtering should work correctly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
projects / koha.git / log