Nick Clemens [Wed, 26 Jun 2019 12:49:14 +0000 (12:49 +0000)]
Bug 23220: Prevent form submission before redirect
To test:
1 - Check in an item to generate a transfer (form another library, no floating)
2 - Check it in again, click 'Cancel transfer'
3 - It may or may not work
4 - To highlight the issue edit return.tt to add the delay line as below:
$('.cancel-transfer').on("click",function(e){
delay(5000);
window.location.href='/cgi-bin/koha/circ/returns.pl?itemnumber=[% itemnumber | html %]&canceltransfer=1'
});
5 - Check in the item repeatedly, click 'Cancel transfer'
6 - View the item in the staff or opac and verify it remains in transit
7 - Undo changes above, apply patch
8 - Test 'Cancel transfer', note it works
9 - Add the delay back in, confirm it still works
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Tue, 25 Jun 2019 08:21:44 +0000 (09:21 +0100)]
Bug 23191: (follow-up) Improve output
This patch adds a check of what plugins installed before the script run
and outputs only those plugins that have been installed for the first
time or upgraded during this run.
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Mon, 24 Jun 2019 12:30:54 +0000 (13:30 +0100)]
Bug 23191: Add commandline script to install plugins
This adds an initial skeliton script to enable plugin installation at
the commandline.
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Katrin Fischer [Fri, 21 Jun 2019 01:25:02 +0000 (01:25 +0000)]
Bug 23126: Remove more unnecessary linebreak processing from serial collection
This should have no visible effect on the templates as the
information the grep changes is not used in the template.
It's also strange, that these lines existed, as
GetSubscriptionsFromBiblionumber contained the same changes.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Arthur Bousquet <arthur.bousquet@inlibro.com> Signed-off-by: Nadine Pierre <nadine.pierre@inLibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Katrin Fischer [Tue, 18 Jun 2019 06:06:10 +0000 (08:06 +0200)]
Bug 23126: Display multi-line entries in subscrpitions correctly
There are several notes and other fields in a subscription that
can be entered as multi-line input with breaks. We should display
them as they were entered with keeping the line breaks intact.
To test:
- Add a subscription
- Add comments including line breaks in internal and OPAC note
- Check the manual history checkbox
- Go to the subscription detail page, tab 'Planning'
- Use the 'Edit history' link to edit the history
- Enter content with line breaks in all the input fields where
it's possible
- Go to the OPAC detail page for your subscription record
- Go to tab 'Subscriptions' > More details > Brief history
- Verify the line breaks show there as <br>
- Apply patch
- Relaod page, verify all information displays correctly now
- Go back to the detail page, subscription tab - verify same there
- Go back to the subscription detail page in staff
- Check editing the history works as expected
- Verify information on all tabs displays correctly
- Receive a serial issue - verify note on top displays right
- Go to the serial collection page of the subscription - same there
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nadine Pierre <nadine.pierre@inLibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Julian Maurice [Wed, 19 Jun 2019 10:07:58 +0000 (12:07 +0200)]
Bug 23156: Add pagination to checkouts in ILS-DI GetPatronInfo service
When patrons have a lot of checkouts, GetPatronInfo can take a lot of
time. This patch introduces two new parameters to allow pagination of
this list of checkouts
Also, fix a warning in C4::ILSDI::Services::GetPatronInfo
Test plan:
1. Go to /cgi-bin/koha/ilsdi.pl?service=GetPatronInfo&patron_id=X&show_loans=1
where X is a borrowernumber of a patron who has several checkouts
Verify that all checkouts are listed
2. Add '&loans_per_page=1&loans_page=1' to the URL. Verify that you have
now only one checkout listed, and that there is a new element
<total_loans> which contain the total number of checkouts
3. Increase the page number in the URL until you have seen all checkouts
4. prove t/db_dependent/ILSDI_Services.t
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Fri, 21 Jun 2019 11:02:43 +0000 (11:02 +0000)]
Bug 23179: Add 'edit subfields' button to framework management
To test:
1) Go to Administration > MARC bibliographic framework
2) On a line click Actions > MARC structure
3) Note the dropdowns for each tag are: Edit, Subfields, Delete
4) Apply patch
5) Reload and note dropdowns are: Edit tag, View subfields, Edit subfields, Delete
6) Confirm options do what is selected
Signed-off-by: Bin Wen <bin.wen@inlibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Tue, 11 Jun 2019 16:46:27 +0000 (16:46 +0000)]
Bug 23096: Add floating toolbar to OPAC lists
This patch makes the list contents table's toolbar "stick" to the top of
the screen when scrolling. Minor markup changes have been made to enable
this change.
To test, apply the patch and open a list in the OPAC which has multiple
titles on it. Confirm that the toolbar sticks to the top of the screen
when you scroll down.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Fri, 7 Jun 2019 11:50:32 +0000 (12:50 +0100)]
Bug 22566: Fix some more issues
1) Fix warning for undefined value in sprintf when no items have the
indemand flag set.
2) Corrections to report_full for bad ternary in string construction
3) Perldoc corrections
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Fri, 22 Mar 2019 17:23:35 +0000 (13:23 -0400)]
Bug 22566: Fix some problems
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Tue, 21 May 2019 14:45:06 +0000 (14:45 +0000)]
Bug 22949: Markup error in OPAC course reserves template
This patch adds a missing "=" in opac-course-reserves.tt in order to
quiet errors returned by the HTML validator.
To reproduce the problem you should have one or more course reserves
available in the OPAC. Go to the course reserves page. Run the page
through the W3C validation service: https://validator.w3.org. Either by
pasting in the URL for the search results (if web accessible) or by
viewing source, copying, and pasting into "Validate by Direct Input."
This patch addresses these errors:
- 'Quote " in attribute name. Probable cause: Matching quote missing
somewhere earlier.'
- 'Attribute class"inst_surname" not allowed on element span at this
point.'
To test, apply the patch and try again to reproduce the validation
errors. Those errors should no longer be present. There should be no
visible change to the page.
Signed-off-by: Frederik Chenier <frederik@inlibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Create a restriction for a patron
Edit patron's details
Remove the restriction
=> Without this patch you get "No property remove_debarment for
Koha::Patron"
=> With this patch applied the restriction is removed
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Kyle M Hall [Thu, 13 Jun 2019 10:34:38 +0000 (06:34 -0400)]
Bug 23116: AllowHoldPolicyOverride allows a librarian to almost place a hold on an item already on hold
A library appears to be able to place a second item level hold on an item a patron already has on hold if
A) AllowHoldPolicyOverride is enabled
and
B) the circ rule allow for multple item level holds.
Once the patron submits the hold requests though, the hold does not get stored in the database.
Because allowing two item level holds for the same item makes no sense, we should not allow
this attempt to take place, even if AllowHoldPolicyOverride is enabled.
Test Plan:
1) Enable AllowHoldPolicyOverride
2) Set up circ rules to allow for multiple item level holds on one record
3) Place an item level hold on a record
4) Note you can force placing a second item hold on that reocrd
5) Attempt to do so, it will not actually work
6) Apply this patch
7) Note you can no longer place another item level hold for the same item
you just placed an item-level hold on
8) Note you can still force holds that contravene the circ rules for
any and all other reasons
9) Test with record level holds
10) Test by placing multiple holds from search results
Signed-off-by: Martha Fuerst <mfurest@hmcpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Simple fix for a regression. Works as expected. Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Tue, 25 Jun 2019 15:19:43 +0000 (16:19 +0100)]
Bug 5287: (RM follow-up) Make tests basket compatible
The selenium tests for addtobasket/removefrombasket started to fail
after the introduction of bug 5287. It turns out that a selenium click
handler will trigger a scroll event if the element you're trying to
click isn't in the view port. Unfortunately it scrolls the viewport just
enough for the element to come on screen but that also triggers the
floating toolbar in this case which ends up floating directly over the
element we want to 'click' and so the click rightfully fails as the
element is not 'clickable'.
This patch works around the issue by setting the window size to being a
HD screen in portrait orientation and therefore negates the need for
scrolling to put the elements in within the viewport.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Mark Tompsett [Thu, 20 Jun 2019 16:42:22 +0000 (16:42 +0000)]
Bug 23109: (follow-up) fix typo in upgrade script
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Katrin Fischer [Mon, 17 Jun 2019 21:50:01 +0000 (21:50 +0000)]
Bug 23109: Improve description of staffaccess permission
Changes:
Allow staff members to modify permissions for other staff members
To:
Allow staff members to modify permissions and passwords for other staff members.
As suggested by Andre on the initial bug report.
To test:
- Go to any patron account and check More > permissions
- Veriy the description is shown as noted above
- Apply patch and run database update
- Reload the page and verify the description has changed
- Run the following SQL and verify the description in the
database table matches as well:
SELECT * FROM userflags where flag = "staffaccess";
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fridolin Somers [Wed, 19 Jun 2019 11:42:16 +0000 (13:42 +0200)]
Bug 23158: keep on-site checkout info when using itemBarcodeFallbackSearch
When using preference itemBarcodeFallbackSearch one can enter a search term instead of a barcode in checkout form.
If on-site is selected this should be transmitted to itemBarcodeFallbackSearch form.
Test plan :
1) Enable system preferences "itemBarcodeFallbackSearch" and "OnSiteCheckouts"
2) Disable system preference "ConsiderOnSiteCheckoutsAsNormalCheckouts"
3) Go to a patron circulation page
4) Check "On-site checkout" in "Checkout settings"
5) Enter a barcode in checkout form and click on "Check out"
6) You see the checkout in table with red "(On-site checkout)"
7) Check "On-site checkout" in "Checkout settings"
8) Enter the title of a record in in checkout form and click on "Check out"
9) Click on "Checkout" on a line
10) You see the checkout in table with red "(On-site checkout)"
Signed-off-by: Arthur Bousquet <arthur.bousquet@inlibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Liz Rea [Sat, 8 Jun 2019 17:57:17 +0000 (17:57 +0000)]
Bug 5287: (QA follow-up) update deprecated button
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Tue, 11 Jun 2019 12:16:10 +0000 (12:16 +0000)]
Bug 5287: Add floating toolbar to search results in OPAC
This patch adds the "hc-sticky" JavaScript library to the OPAC and uses
it to make the search results toolbar "stick" to the top of the page as
the user scrolls down.
This patch also moves search results pagination into the toolbar so that
pagination links are available. Font Awesome icons are added to the
pagination include to replace arrow HTML entities.
To test, apply the patch and rebuild the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Perform a catalog search in the OPAC which will return multiple pages
of results. Confirm that the toolbar "sticks" and that all controls
in the toolbar work correctly.
- Test at various browser widths to confirm that it adapt well to
various sizes.
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Julian Maurice [Wed, 19 Jun 2019 09:10:14 +0000 (11:10 +0200)]
Bug 23154: Add pagination to /api/v1/checkouts
Allow to use _page and _per_page query parameters for
/api/v1/checkouts
Also fix a timezone problem in t/db_dependent/api/v1/checkouts.t
Test plan:
1. With your favorite REST tester tool, or directly in the browser,
fetch http://koha/api/v1/checkouts and check that you have results
2. Fetch /api/v1/checkouts?_per_page=1&_page=1 and check that only the
first result is returned. Check that response contains headers
X-Total-Count and Link
3. Fetch /api/v1/checkouts?_per_page=1&_page=2 and check that only the
second result is returned. Check that response contains headers
X-Total-Count and Link
4. prove t/db_dependent/api/v1/checkouts.t
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Mark Tompsett [Wed, 19 Jun 2019 14:06:28 +0000 (14:06 +0000)]
Bug 23159: Add comments to addbiblio.tt
This patch adds code comments to the template to clarify indenting over
the page boundary.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Tue, 18 Jun 2019 15:32:24 +0000 (15:32 +0000)]
Bug 23159: Reindent addbiblio.tt
This patch corrects whitespace in the basic MARC editor template,
addbiblio.tt: Tabs converted to spaces, indentation corrected. Some
comments have been added in the markup to clarify the page structure.
To test, apply the patch and open the basic MARC editor. Confirm that
everything works correctly, including:
- Showing/hiding subfields
- Re-ordering subfields
- Removing tags and subfields
- Cloning tags and subfields
- Plugin links
Use the "-w" flag when using diff to examine the patch. The only changes
should be places where single lines were broken up and where comments
were added.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23146: (QA follow-up) Make sure we use the absolute path
When making a request using any tool (like cUrl or Postman) you get a
'Basic authentication disabled' error (if it is actually disabled) or an
'invalid password' error if it is disabled. This is because the
comparisson of the path we do passes on oauth.t but fails on external
tools. This is probably related to our stack including Apache URL
mappings and then in the plack.psgi file. The safest way is to just ask
Mojo::URL the absolute path to be sure.
To test:
- Having the rest of the patches applied and plack restarted, run: [1]
$ curl -X POST -H 'Authorization: Basic ZGQ2NjlmNGUtZmI1NS00Y2YzLWE4ZmYtYmFiYzJiNDIwNWY1OmM0ZDJmYmYzLWYwOWMtNGJkZi1iNWE4LTgxMDJmNjcwYTI1Mw' -i 'http://kohadev.myDNSname.org:8081/api/v1/oauth/token' --data grant_type=client_credentials
=> FAIL: It fails saying Basic auth is disabled
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/oauth.t
=> SUCCESS: Tests pass
- Apply this patch
- Replicate your curl/postman test
=> SUCCESS: It now works as expected
- Run:
k$ prove t/db_dependent/api/v1/oauth.t
=> SUCCESS: Tests still pass!
- Sign off :-D
[1] You need to generate a client_id and client_secret, and encode them
using: encode_base64url( "$client_id:$client_secret" );
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23146: Add support for Basic auth on the OAuth2 token endpoint
The original implementation only contemplated the option to pass the
client_id and client_secret on the request body. It is very common that
clients expect to be able to pass them as a Basic authorization header:
This patch introduces support for this, by:
- Adding a check for the presence of the Authorization header in the
OAuth token request handling code and making that case extract the
client_id and client_secret from the header instead of the original
implementation. No behaviour changes.
- The Auth#under sub is changed so it doesn't go through the
authenticate_api_request chain step, as it would be in conflict with
general Basic authentication.
- Original tests are generalized so they are run in both ways, with the
same expected results.
To test:
- Apply the unit tests patch
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/oauth.t
=> FAIL: Tests fail because the current API doesn't support the feature
- Apply this patch
- Run:
k$ prove t/db_dependent/api/v1/oauth.t
=> SUCCESS: Tests pass!
- Sign off :-D
Sponsored-by: ByWater Solutions Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Kyle M Hall [Fri, 30 Nov 2018 17:23:43 +0000 (12:23 -0500)]
Bug 20292: Filter/censor info sent via SIP
Some libraries would like to limit the amount of personal information a SIP server sends
to arbitrary parties on a per-login basis.
Test Plan:
1) Add a new key/value pair to one of your existing login stanzas in your SIP config file
For example: hide_fields="BD,BE,BF,PB"
2) Restart SIP
3) Send a SIP message that would normally return those fields ( in this example, a Patron Information Request )
4) Note the response has had those fields removed
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Christopher Davis <tubaclarinet@protonmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Kyle M Hall [Tue, 7 May 2019 18:53:29 +0000 (14:53 -0400)]
Bug 22862: Normalize SMS messaging numbers before validating them
Librarians often copy and paste patron data, including phone numbers. SMS phone numbers are now being validated to conform to the E.164 specification. It would be nice to try to normalize that data by stripping non-numeric data from the paste (i.e. dashes, parens, etc ).
Test Plan:
1) Apply this patch
2) On the staff side, Attempt to enter invalid characters the SMS number field
3) Note you cannot enter invalid characters
4) Attempt to paste a phone number with invalid characters
5) Note those characters are removed on paste
6) Repeat these steps on the OPAC
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Thu, 9 May 2019 16:55:00 +0000 (16:55 +0000)]
Bug 22888: Use DataTables for Koha news table filtering
This patch modifies the Koha news page so that filtering the table of
news is done using DataTables' built-in search functionality. This
allows for the table to be filtered without requiring a reload of the
page.
The patch also moves the table filter into a sidebar form and adds a
keyword field. A minor change has been made to the global CSS to improve
the display of the form in the sidebar.
To test, apply the patch and rebuild the staff client CSS.
- Go to Tools -> News.
- Test the various table filter options: keyword, display location, and
library. Confirm that all work as expected.
- Changes to the keyword search text should be reflected in the
search field at the top of the table, and vice versa.
- Changes to the sidebar filter should trigger the correct state of the
"Clear filter" button at the top of the news table (enabled or
disabled).
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Thu, 9 May 2019 17:27:15 +0000 (12:27 -0500)]
Bug 21588: Add expand/collapse all links to the "Acquisition details" subscriptions
In order to make the view cleaner, a librarian may need to expand or
collapse all the orders at once.
Test plan:
- Create a subscription
- Create several orders from this subscription (quantity > 1)
- Receive partially the orders
- Go to the subscription detail page, "Acquisition details" tab
=> Notice the 2 new links "Expand all" and "Collapse all"
Make sure they work as expected.
Also note that a bug has been fixed, when the page is loaded the tree is
now expanded.
Signed-off-by: Liz Rea <wizzyrea@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Mon, 18 Dec 2017 15:41:33 +0000 (15:41 +0000)]
Bug 15704: Split up Zebra indexing of RDA 264 information
To test:
1 - Add a record with a unique publisher "Supercalifragilistic" in the
264 b field
2 - Search for the value
3 - Record not found
4 - Apply patch (may need ot copy the .xml file into koha install)
5 - Reindex all the things
6 - Search for the value
7 - Success!
Signed-off-by: Felicia Martin <felicia.martin@dncr.nh.gov> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Joonas Kylmälä [Mon, 3 Jun 2019 14:58:34 +0000 (14:58 +0000)]
Bug 23034: Remove uninitialized value warning in Mana KB settings
This gets rid of the warning "Use of uninitialized value $auto_share
in string ne at [...]" by initializing the variable with empty string.
Test plan:
1) Go to page cgi-bin/koha/admin/share_content.pl and unselect "Auto
subscription sharing". Click "Save".
2) Check plack-error.log and notice the warning "Use of uninitialized
value $auto_share [...]"
3) Apply the patch and repeat the previous steps but now this time the
warning is gone in plack-error.log.
4) Make sure the AutoShareWithMana syspref with and without the patch
is in unselected state after clicking "Save".
Sponsored-by: The National Library of Finland Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Katrin Fischer [Mon, 17 Jun 2019 21:20:41 +0000 (23:20 +0200)]
Bug 23098: Reword success message of KOC upload process
When uploading KOC files the processing of transactions needs
to happen in a separate second step. This is why the success
message "Your file was processed" was found to be misleading.
This patch changes it to the wording suggested by Benjamin
Daeuber in the original bug report. Thx!
To test:
- Create a KOC file either manually or by downloading it
from the plugin
- Upload the KOC file into Koha using Circulation >
Upload offline circulation file (.koc)
- Verify the new message is clear and has no typos :)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fridolin Somers [Tue, 11 Jun 2019 13:31:45 +0000 (15:31 +0200)]
Bug 22944: remove obsolete unit test
Test 'AnonymiseIssueHistory should not return any error if success' is obsolete,
previous statement will explode if something went wrong.
Test plan :
Run t/db_dependent/Koha/Patrons.t
Signed-off-by: Arthur Bousquet <arthur.bousquet@inlibro.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fridolin Somers [Tue, 21 May 2019 09:55:40 +0000 (11:55 +0200)]
Bug 22944: avoid AnonymousPatron in search_patrons_to_anonymise
In Koha::Patrons::search_patrons_to_anonymise() old issues already affected to the anonymous patron should be avoided. It is useless and can impact performance.
It is already working if AnymousPatron is not defined or 0 because of :
'old_issues.borrowernumber' => { 'not' => undef }
In theory the anymous patron should have privacy=0 but in case its not it should be explicitly avoided.
Test plan :
Run t/db_dependent/Koha/Patrons.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Thu, 13 Jun 2019 10:42:02 +0000 (11:42 +0100)]
Bug 23115: Tweak display of totals on 'Fines and charges' page
This patch tweaks the display of totals on the OPAC 'Fines and charges'
page to clarify between the totals before and after applying credits.
Test Plan:
1) Add some debts and credits to a patrons account
2) Look at the 'Fines and charges' page before applying the patch
3) Look at the 'Fines and charges' page after applying the patch
4) Varify the new layout is an improvment or not
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nadine Pierre <nadine.pierre@inLibro.com> Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Thu, 13 Jun 2019 09:02:35 +0000 (10:02 +0100)]
Bug 23106: Tweak display of totals on payment page
This patch tweaks the display of totals on the fines payments page to
clarify between the totals before and after applying credits.
Test Plan:
1) Add some debts and credits to a patrons account
2) Look at the pay page before applying the patch
3) Look at the pay page after applying the patch
4) Verify the new layout is an improvment or not
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Mark Tompsett [Mon, 17 Jun 2019 17:57:46 +0000 (17:57 +0000)]
Bug 22571: (follow up) fix Donald cut-&-paste error
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Sun, 5 May 2019 17:41:46 +0000 (12:41 -0500)]
Bug 22571: Handle control fields in MMT for conditionals
Control fields are not handled correctly by Koha::SimpleMARC when
comparaison (with or without regex) is done.
Which means we did not support something like:
Do something if control field 008 equals or matches "a string"
Test plan:
Create a new MARC modification template and a new action, like:
Add new field 100$a with value "foo bar" if 008 (or any other control
fields) matches (or equals) a regex
Then use the record mofication tool and confirm that the new field is
create if the regex matches 008 of the bib record
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Sun, 5 May 2019 17:41:43 +0000 (12:41 -0500)]
Bug 22571: Add tests
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fridolin Somers [Fri, 14 Jun 2019 08:43:15 +0000 (10:43 +0200)]
Bug 22617: Fix checkout notes typo in manage_checkout_notes permission usage
When logged into the staff client with an account with full circulate permissions (and therefore including the manage_checkout_notes permission) an error occurs when clicking on the Checkout notes pending link. The account is logged out automatically with the message: "Error: you do not have permission to view this page. Log in as a different user".
The same error occurs for both the link on the home page dashboard and from the Circulation module button. Works as expected if Superlibrarian permission is set.
This is just a typo in perl script : circulation instead of circulate
Test plan :
1) Set preference "AllowCheckoutNotes" to "Allow"
2) Create a user with only permissions "catalogue" and "circulate > manage_checkout_notes"
3) Loggin with this user
4) Go to "Circulation" home page
5) Click on "Checkout notes"
6) You should be allowed to access
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fridolin Somers [Wed, 19 Jun 2019 05:04:25 +0000 (07:04 +0200)]
Bug 23153: In framework management action subfields must not go directly to edition
Since 18.11, when viewing a framework field clicking on Actions >
Subfields goes to subfields edition instead of subfields table view.
This is because link contains op=add_form.
This is is also missing /cgi-bin/koha/admin.
Test plan :
1) Go to Administration > MARC bibliographic framework
2) On a line click Actions > MARC structure
3) On a line click Actions > Subfields
4) You see subfields table
5) Click on Edit subfields
6) You see subfields edition tabs
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Thu, 30 May 2019 02:28:23 +0000 (21:28 -0500)]
Bug 15814: Handle correctly MMTA edit button
The MARC modification template action edit buton does not correctly
handle variable escaping.
Assigning a JS variable containing the JSON representation of the
hashref will make the processing much more easier.
Test plan:
Create a MARC Modification Template with several actions.
In the description you should use the following characters, to try to
break this patch: \ ' " \n \r
(not sure what we handled \n and \r)
Then edit the action, modify and save again.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Marcel de Rooy [Thu, 20 Jun 2019 12:37:27 +0000 (12:37 +0000)]
Bug 23150: (follow-up) Make gdpr_proc_consent mandatory for create
When updating (patron modification), the field should not be required.
Test plan:
Check patron modification on opac.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Wed, 19 Jun 2019 19:49:15 +0000 (14:49 -0500)]
Bug 23150: Do not consider gdpr_proc_consent a mandatory field
It introduced a regression in the patron's self modification feature.
Patron's details are no longer modificable, the screen displays
"You have not filled out all required fields. Please fill in all missing
fields and resubmit."
Test plan:
- Set GDPR_Policy to either Enforced or Permissive
- Set PatronSelfRegistrationBorrowerMandatoryField to empty
- Set OPACPatronDetails to Allow
- Log into the OPAC
- Accept the GDPR screen
- Go to opac-memberentry.pl, change something, submit modification
request
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Tue, 21 May 2019 12:39:09 +0000 (12:39 +0000)]
Bug 22946: Markup error in OPAC search results around selection links
This patch makes minor corrections to the template for OPAC search
results. These corrections fix errors returned by the HTML validator.
To reproduce the problem, make sure holds and/or tags are enabled in the
OPAC. Perform a search in the OPAC which will return multiple results.
Run the page through the W3C validation service:
https://validator.w3.org. Either by pasting in the URL for the search
results (if web accessible) or by viewing source, copying, and pasting
into "Validate by Direct Input."
This patch addresses one specific error:
- "Element div not allowed as child of element span in this context."
To test, apply the patch and try again to reproduce the validation
errors. Those errors should no longer be present. There should be no
visible change to the search results view.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Katrin Fischer [Mon, 17 Jun 2019 21:35:19 +0000 (21:35 +0000)]
Bug 23097: Fix regression on overdues report and link patrons to moremember
The link from the patron name in the circulation > overdues report
shouldn't point to the reserves tab, as this report is about checkouts.
The patch restores the behaviour as it was in 17.11.
To test:
- Make sure you have a patron account with overdue items
- If you don't have one, check out an item with specified due date in the
past
- Go to Circulation > Overdues
- Veriy the overdue shows
- Click on the patron name that is linked
- Verify you go to the checkouts tab in patron account with holds tab selected
- Apply patch
- Reload Overdues report
- Verify the link now leads to the Details tab with the checkouts tab in front
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Kyle M Hall [Wed, 19 Jun 2019 11:00:01 +0000 (07:00 -0400)]
Bug 23103: (QA follow-up) Return undef implicitly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Kyle M Hall [Wed, 12 Jun 2019 19:08:08 +0000 (15:08 -0400)]
Bug 23103: Cannot checkin items lost by deleted patrons with fines attached
Test Plan:
1) Checkout an item to a patron
2) Ensure the item has a replacement cost (or itemtype has default)
3) Ensure patrons are charged when items lost
4) Mark the item lost
5) Confirm patron has a fine
6) Write off the fine
7) Delete the patron
8) Check in the item
9) Note the internal server error
10) Apply this patch
11) Repeat steps 1-8
12) Note there is no internal server error!
13) prove t/db_dependent/Circulation.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Martin Renvoize [Fri, 21 Jun 2019 11:28:48 +0000 (12:28 +0100)]
Bug 23177: (RM follow-up) Further test clarifications
This patch makes a few minor improvements to Circulation.t
1) Adds a name to some of the scoped blocks by converting them to
subtests.
2) Adds output messages to some tests where they were missing.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Marcel de Rooy [Fri, 21 Jun 2019 09:15:18 +0000 (09:15 +0000)]
Bug 23177: (QA follow-up) Remove subtest txn_begin and rollback
This resolves:
DBIx::Class::Storage::txn_rollback(): A txn_rollback in nested transaction is ineffective! (depth 1)
Removing unneeded subtest txn's. We should probably add them everywhere or
just at global level.
Test plan:
With all three patches applied, run Circulation.t a few times.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Mon, 17 Jun 2019 17:58:56 +0000 (17:58 +0000)]
Bug 23140: Fix typo in branchcode parameters for print slip
To test:
1 - Have [% branch.branchcode %] in your TRANSFERSLIP
2 - Checkin an item from another branch (with AutomaticItemReturn = do )
3 - Inspect the button in the browser to see the typo
4 - Click 'Print slip'
5 - Note the branchcode is not populated
6 - Clear the transfer
7 - Apply patch
8 - Repeat
9 - Note typo is fixed and slip correctly populated
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Jonathan Druart [Mon, 13 May 2019 14:57:52 +0000 (09:57 -0500)]
Bug 13640: Do not display unreserveable items on the Holds to pull screen
We should only display the items that meet the hold policies
Test plan:
It would be good to have a huge list of holds displayed on the "Holds to
pull" and confirm that the display is now correct.
One of the possible test plan has been let in a comment on the bug
report:
Bib Record A has 2 items:
Item Record X (can be placed on hold)
Item Record Y (cannot be placed on hold)
If you place a bib-level hold on Bib Record A, both Item Record X and
Item Record Y show up as available items in the Holds To Pull List.
With this patch applied you must not see Y
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Mark Tompsett [Mon, 10 Jun 2019 18:36:49 +0000 (14:36 -0400)]
Bug 23090: Add some special characters
TEST PLAN
---------
$ sudo mysql -u root
> CREATE USER 'bug23090_test1'@'localhost' IDENTIFIED BY 'badpassword';
[Magical MySQL Error]
> CREATE USER 'bug23090_test1'@'localhost' IDENTIFIED BY 'GoodP@ssw0rd';
[Should be okay]
> DROP USER 'bug23090_test1'@'localhost';
> QUIT
$ sudo koha-create --create-db fail23090
[Magical MySQL Error]
[Apply this patch and put it (debian/scripts/koha-create) into place in
/usr/sbin/koha-create]
$ sudo koha-create --create-db pass23090
(Clean up and databases made)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
- On a clean 18.11.x, install a plugin [1]
- Run:
$ sudo koha-mysql kohadev
> SELECT * FROM plugin_data;
=> SUCCESS: Notice there's a __INSTALLED_VERSION__ line for your plugin
- Checkout latest master, restart all the things
- Run:
$ updatedatabase
=> FAIL: It fails on 18.12.00.069 because the plugin_methods table doesn't exist
- Run:
$ sudo koha-mysql kohadev
> SELECT * FROM plugin_data;
=> FAIL: No __ENABLED__ line for your plugin
- Apply the patch
- Run:
$ updatedatabase
=> SUCCESS: Update passes the 18.12.00.069 step correctly
- Run:
$ sudo koha-mysql kohadev
> SELECT * FROM plugin_data;
=> SUCCESS: There's an __ENABLED__ line for your plugin
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Fridolin Somers [Mon, 17 Jun 2019 14:28:22 +0000 (16:28 +0200)]
Bug 23132: Fix encoding issues in facets with show more link
When one uses characters like Ã, ç ... the first searcshow up correctly but when you refine your search with "Show more", the encoding becomes bad and so, results of the search too.
Test plan :
Without the patch:
- check if you have your SysPref SearchEngine with Elasticsearch as value,
- put your SysPref FacetMaxCount at 10,
- search in the catalog "a" and then in Refine your search click on show more (just to see how it works),
- then search with special characters like "é", ç" ... and make the same test, the research should be wrong when you click on show more and the page is realoaded.
Then apply the patch:
- and make the same with a classic reasearch, then with special characters,
- verify that when you click on show more the page isn't realoded and the reasearch is correct.
- same with show less
- and finnaly, add some facets and test show more/less
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
David Nind [Sat, 15 Jun 2019 01:43:39 +0000 (01:43 +0000)]
Bug 23130: Fix alternative mana server URL in etc/koha-conf.xml
If the alternative mana KB server URL in etc/koha-conf.xml is used it
causes an error message like 'malformed JSON string, neither tag,
array, object, number, string or atom, at character offset 0 (before
"<html>\r\n<head><tit...") at /usr/share/perl5/JSON.pm line 171.' when
submitting an account creation request, and the account creation
request fails.
This patch updates the alternative mana KB server URL in
etc/koha-conf.xml from http://mana-test.koha-community.org to
https://mana-test.koha-community.org (the URL should start with https
instead of http). If the updated URL is used the account creation
request succeeds without causing any error messages.
To test:
1) Add <mana_config>http://mana-test.koha-community.org</mana_config> to
/etc/koha/sites/<instancename>/koha-conf.xml (see etc/koha-conf.xml
in the Koha code repository for an example of where to add this;
<instancename> if using koha-testing-docker is kohadev).
2) Clear memcached and restart services so that the changes to your Koha
instance configuration are recognised (if using koha-testing-docker
run flush_memcached and then restart_all).
3) From the staff client home page go to Koha administration >
Additional parameters > Share content with Mana KB.
4) Enable content sharing: change 'Use Mana KB for sharing content' to
Yes and press Save.
5) Enter your first name, last name and email address in the Configure
Mana KB section of the page and then click on 'Send to Mana KB'.
6) An error message is displayed, this may be something like:
'malformed JSON string, neither tag, array, object, number, string
or atom, at character offset 0 (before "<html>\r\n<head><tit...") at
/usr/share/perl5/JSON.pm line 171.'
7) Change the mana server URL to https://mana-test.koha-community.org
(see step 1), and repeat steps 2, 3 and 5.
8) Instead of an error message you should get 'You successfully created
your Mana KB account. Check your mailbox and follow instructions.'
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Nick Clemens [Mon, 17 Jun 2019 19:20:55 +0000 (19:20 +0000)]
Bug 23144: Replace missing =cut in svc/header
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Mon, 10 Jun 2019 16:49:36 +0000 (16:49 +0000)]
Bug 22851: Style navigation links in serials modules like same links in other modules
This patch makes minor markup changes to the serials sidebar menu
include so that links are displayed in a style consistent with similar
menus in other areas of the staff client.
This patch contains whitespace changes, so please use the "-w" flag when
viewing the diff.
To test, apply the patch and go to the Serials module. The links in the
sidebar menu should be displayed in the same style as the corresponding
menu on the Acquisitions home page.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Fri, 14 Jun 2019 14:59:34 +0000 (14:59 +0000)]
Bug 23122: When searching callnumber in simple search, search option is not retained
This patch copies some code and markup from the staff client where call
number phrase searches are correctly handled. A check for
'ms_callnumcommaphr' is copied from search_indexes.inc. Handling of
commas and dashes is copied from search.pl.
To test, apply the patch and make sure the
OpacAddMastheadLibraryPulldown system preference is enabled.
- From the OPAC main page, select "Call number" from the search pull
down at the top of the page.
- Perform any search (it need not return results).
- Verify that the search option retains the "Call number" selection.
- Repeat the test with and without the OPACNumbersPreferPhrase system
preference enabled.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com> Signed-off-by: Nadine Pierre <nadine.pierre@inLibro.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard [Thu, 6 Jun 2019 12:24:41 +0000 (12:24 +0000)]
Bug 23061: Add column/print/export feature on checkout history page
This patch adds columns configuration and export features to the
checkout history page.
This patch also removes some inline CSS: "overflow:hidden" from both the
checkout and holds history pages. This was breaking the table controls
tooltips, and didn't appear to me to be necessary.
To test, apply the patch and restart Plack (or restart_all on
kohadevbox).
- Open a patron's checkout history page in the staff client.
- The table of checkouts should have controls at the top.
for columns configuration and export/print.
- These controls should work correctly.
Signed-off-by: Michal Denar <black23@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Petter von Krogh [Wed, 22 May 2019 15:38:21 +0000 (15:38 +0000)]
Bug 22966: Add Norwegian library and patron names for installer
THe Norwegian installer had reused english smaple atrons and libraries,
this patch fixes this.
test plan:
empty database
install norwegian translation
run the web-installer and choose norwegian language
select sample libraries and patrons
make sure there are no errors
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
I trust Petter with Norwegian names, so I didn't spell check them :)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
projects / koha.git / log