This patch adds test cases for the new syspref NoRenewalBeforePrecision.
Tests if GetSoonestRenewDate returns correct values for both 'date' and
'exact_time' settings.
Also adds a few comments related to bugs 7413 and 14101.
To test:
1) prove t/db_dependent/Circulation.t
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch updates the calculation of 'No renewal before' to include the
new syspref NoRenewalBeforePrecision.
To test:
1) Check out an hour-based loan with 'No renewal before' set to 1.
Switch syspref NoRenewalBeforePrecision between 'date' and 'exact
time'. Confirm that with both settings the item cannot be renewed
until exactly one hour before due.
2) Check out a day-based loan with 'No renewal before' set to 1 day.
Confirm that:
* with NoRenewalBeforePrecision set to 'date', renewal is possible
at 12:00 AM on the day before due.
* with NoRenewalBeforePrecision set to 'exact time', renewal is
possible at 11:59 PM on the day before due.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Bug 14395: Add new syspref NoRenewalBeforePrecision
Currently the 'NoRenwalBefore' setting is always based on the exact
DateTime of the due date. This patch introduces a new global syspref for
choosing if 'NoRenewalBefore' should instead be calculated based on date
only. This is only relevant for loans caluclated in days. Hourly loans
are not affected.
To test:
1) Apply bug 14101, then apply this patch.
2) Run installer/data/mysql/updatedatabase.pl
3) Confirm that a new syspref NoRenewalBeforePrecision is available
in administration. It should let you choose between 'date' (default)
and 'exact time'.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Barry Cannon [Wed, 16 Dec 2015 10:37:17 +0000 (10:37 +0000)]
Bug 15311 - Let libraries set text to display when OpacMaintenance = on
Added new systempreference OpacMaintenanceNotice.
When OpacMaintenance is ON the HTML contents of OpacMaintenanceNotice will
be displayed.
Enabling OpacMaintenance is all that is required to enable this preference.
If OpacMaintenanceNotice is undefined, the default (original) notice will
appear when OpacMaintenance is enabled.
To test:
- Enable OpacMaintenance systempreference
- Observe the default maintenance message when OPAC is viewed
- Edit OpacMaintenanceNotice systempreference, adding custom HTML
- Observe the custom HTML appear on the opac
- Remove OpacMaintenanceNotice (mindful of orphaned spaces etc.)
- Observe the default opac notice appears in the opac
- Disable OpacMaintenance
- Observce opac is back online
Moving code to atomic update and fixing merge conflict
NOTE: Accounted for an SQL typo and autoescaping of the template.
If someone else could test this, then I would be fine with
marking it signed off.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Barry Cannon [Tue, 14 Jul 2015 11:25:55 +0000 (12:25 +0100)]
Bug 14523 - Google jackets being blocked when OPAC using HTTPS
This patch changes the Google jackets URL to use HTTPS instead of HTTP.
Test Plan:
1) Enable Google Jackets
2) Ensure the Koha OPAC instance is configued to use HTTPS
3) Confirm Google jackets display correctly.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Nick Clemens [Thu, 28 Jan 2016 20:33:58 +0000 (20:33 +0000)]
Bug 15697: Unnecessary comma between title and subtitle on opac-detail.pl
To test:
1 - Go to Administration->Keyword to MARC mapping
2 - Add a mapping (or ensure it exists)
Field name: subtitle
MARC field: 245
MARC subfield: b
3 - View a record with a subtitle in the opac
4 - Note in MARC 21 you have "Title of record:, subtitle of record"
5 - Apply patch
6 - View the record again and note the comma is no longer present.
Note: this patch removes the comma only for MARC21 where subtitle is not
repeatable. UNIMARC seems to be repeatable and does not include
punctuation so I believe this may be needed there.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. Comma removed from title of the window and breadcrumb
section
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14199: Modify webinstaller sql files for marc21_orgcode plugin
This patch updates the sql installer files for new installations.
Occurrences to the three plugins marc21_field_003, 040c and 040d are
replaced by marc21_orgcode.pl.
This has been generated by one sed statement.
Test plan:
[1] Run a new installation or run some of the changed sql files manually.
[2] Verify that marc21_orgcode is linked to fields previously linked to
the three old plugins.
[3] Do a git grep on the three plugin file names. No occurrences expected.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Have tested the three english sql files:
authorities_normal_marc21.sql: 18 rows with marc21_orgcode (003 and 040a
for 9 auth codes)
marc21_framework_DEFAULT.sql: 1 row with marc21_orgcode (003) -- this patch
does not add them to 040c or 040d; no behavior change..
marc21_simple_bib_frameworks.sql: 8 rows (003 for 8 frameworks)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The following files do no longer need an adjustment:
installer/data/mysql/de-DE/marcflavour/marc21/optional/marc21_simple_bib_frameworks.sql
installer/data/mysql/es-ES/marcflavour/marc21/optional/marc21_simple_bib_frameworks.sql
installer/data/mysql/it-IT/marcflavour/marc21/optional/marc21_simple_bib_frameworks.sql
For details, check Bug 15097: Update MARC21 de-DE frameworks to Update 21.
And similar reports for es-ES and it-IT.
Verified this change by installing de-DE in the webinstaller. The plugin for
field 003 was correctly set to marc21_orgcode.pl.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14199: Database revision for marc21_orgcode.pl
This patch adds the dbrev in atomicupdate, updating the marc structure
for existing installations. (New installation in previous patch.)
And it removes the obsolete plugin files.
Test plan:
Run upgrade. Verify that new plugin is linked (for bib and auth).
Check plugin in editor.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Plugin tested, added to 040a/c/d
Test pass
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14199: Unify marc orgcode plugins, not overwriting existing values
This patch copies code from marc21_field_003.pl to create marc21_orgcode.pl
for more generic use. Other fields like 040c or 040d should use it too.
Note: The plugin is used for authorities too (003, 040a).
One behaviour change is added: If the corresponding field is already
filled, it will not be overwritten.
In the unit test marc21_orgcode already replaces marc21_field_003.
Test plan:
[1] Attach plugin marc21_orgcode to a field (e.g. 003) and test it in
the MARC editor of Cataloguing or Authorities.
[2] Check if a value is not overwritten any more.
[3] Run unit test t/db_dependent/FrameworkPlugin.t; don't be distracted by
the noisy warnings of marc21_field_007.pl. They will be addressed on
another report.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jesse Weaver [Fri, 18 Dec 2015 17:20:07 +0000 (10:20 -0700)]
Bug 14658 - (QA followup) make it easier to grep for these syspref names
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jesse Weaver [Mon, 17 Aug 2015 21:00:10 +0000 (15:00 -0600)]
Bug 14658 - Split PatronSelfRegistrationBorrowerUnwantedField into two preferences for creating and editing
Test plan:
1) Make sure there is at least one field in PatronSelfRegistrationBorrowerUnwantedField.
2) Apply patch, and update database.
3) Check to make sure that the new system preference
PatronSelfModificationBorrowerUnwantedField has the same value as
PatronSelfRegistrationBorrowerUnwantedField.
4) Verify that the same fields are hidden for self-registering a new
borrower and edting a new one (both on the OPAC).
5) Change PatronSelfModificationBorrowerUnwantedField, and verify that
the two preferences correctly apply to editing vs. creating.
Signed-off-by: Michael Sauers <msauers@dospace.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 6 Jan 2016 10:41:44 +0000 (10:41 +0000)]
Bug 4941: Remove the singleBranchMode system preference
The singleBranchMode system preference does not make sense.
Either the install has only 1 library defined or several. In both case,
we can easily guess the behavior to follow.
So the idea of this patch is to replace the fetch of this syspref with a
call to count the number of libraries defined in DB.
Test plan:
1/ From a fresh Koha install, execute the DB entry to remove the pref.
2/ Define only 1 library
3/ Confirm that Koha behaves the same as before (try to change your
library, look at the facets)
4/ Create another library (or more) and reinsert the pref and set it:
insert into systempreferences (variable, value)
values('singleBranchMode', 1);
5/ Execute the DB entry
You should get a warning message.
6/ Repeat 3.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Does what it says, but will change behaviour for any Koha install that
has 2 branches defined, One circulation, and this preference set.
If that is an acceptable change, we might need to make sure this is noted well in the
release notes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Wed, 10 Feb 2016 17:37:11 +0000 (17:37 +0000)]
Bug 15798: Remove C4::Koha::displayServers
This subroutine is no longer is use and can be removed.
Test plan:
git grep displayServers
should not return any results.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Thu, 18 Feb 2016 02:19:30 +0000 (21:19 -0500)]
Bug 15071 - In OPAC search results, "checked out" status should be more visible - Compiled CSS
Compiled CSS file.
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Owen Leonard [Thu, 18 Feb 2016 02:17:10 +0000 (21:17 -0500)]
Bug 15071 - In OPAC search results, "checked out" status should be more visible
The prog template in the OPAC designated a color for the "unavailable"
class associated with items in search results which are checked out.
This class never made it into the Bootstrap theme. This patch adds it to
the Bootstrap theme's LESS file.
To test, apply the patch and search the OPAC for terms that will return
checked out items. In the list of search results, on the "availability"
line, the "Checked out" text should now be red. The change is visible
with XSLT on or off.
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Marcel de Rooy [Wed, 24 Feb 2016 12:39:38 +0000 (13:39 +0100)]
Bug 15891: Fix errors on updatedatabase
Two curly braces..
Test plan:
Run the update.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Kyle M Hall [Fri, 18 Dec 2015 19:30:13 +0000 (19:30 +0000)]
Bug 15343 [QA Followup] - Fix issues
1) "Contact information" should be "Password"
2) Don't pass sysprefs from the script to the template, use Koha.Preference()
3) minPasswordLength is optional, we cannot always assume it is set
4) Password field when does not follow convention completely when mandatory
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com> Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Nick Clemens [Sat, 12 Dec 2015 02:10:06 +0000 (02:10 +0000)]
Bug 15343 - Allow user to set password on opac-memberentry.pl
This patch allows patrons to create thier own password during OPAC self
registration. It sets the password field to be hidden by default, and
allows for a system generated password if no password is supplied and
field is not mandatory
1 - Apply patch
2 - run updatedatabase.pl
3 - Check syspref "PatronSelfRegistrationBorrowerUnwantedField" - it
should contain 'password'
4 - Check self registration on opac - there should be no change
5 - Remove 'password' from PatronSelfRegistrationBorrowerUnwantedField
6 - Password field should now be visible in OPAC self registration
7 - Register a patron: If no passwor is supplied you should get a system
generated password
8 - Register a patron with a password, your password should be used
9 - Add 'password' to PatronSelfRegistrationBorrowerMnadatoryField
10 - Attempt to register a patron with no password - it should fail
11 - Try all combinations if mismatched/short/missing passwords and view
correct error messages
12 - prove t/db_dependent/Members.t
Julian Maurice [Tue, 5 Jan 2016 11:24:57 +0000 (12:24 +0100)]
Bug 15471: Add column settings and filters to Holds queue table
Add column visibility menu using DataTables Buttons
Add a text filter on top of each column
Also extend page width so that the large table is better centered
Depends on bug 15285
Test plan
1. Go to Holds queue page (circ/view_holdsqueue.pl)
2. Check that table sorting and filtering work well and that you can
hide each column
3. Go to Admin > Configure columns and change the settings for this
table (Circulation > view_holdsqueue > holds-table). Verify that the
settings work by going again to the Holds queue page
4. Check that filters continue to work after hiding some columns
Tested on top of 15285, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Kyle M Hall [Fri, 5 Feb 2016 00:29:22 +0000 (00:29 +0000)]
Bug 15629 [QA Followup]
* Use ->id instead of ->branchcode when possible to eliminate use of that nomenclature
* Fix bad use of ->branchcode to ->{branchcode} for unblessed hashref version of Koha::Library
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Wed, 20 Jan 2016 13:22:48 +0000 (13:22 +0000)]
Bug 15629: Koha::Libraries - Remove GetBranchInfo
C4::Branch::GetBranchInfo was only used once in opac/opac-suggestions.pl
The occurrence can easily be replaced by a call to Koha::Libraries->find
Test plan:
1/ Create a suggestion for library A
2/ Enable OPACViewOthersSuggestions
3/ Use a patron from library B to see the suggestions
4/ The "Suggested for" value should be correctly filled with the library
A name.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Wed, 20 Jan 2016 13:13:14 +0000 (13:13 +0000)]
Bug 15629: Koha::Libraries - Remove ModBranch
This subroutine was only used in tests to add/update a library.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchDetail retrieved library infos, it could be easily
replaced with Koha::Libraries->find
When this change needs other big changes, the unblessed method is
called, to manipulate a hashref (as before) instead of a Koha::Library
object (for instance when $library is sent to GetPreparedLetter).
Test plan:
1/ Print a basket group, the library names should be correctly
displayed.
2/ Enable emailLibrarianWhenHoldIsPlaced and place a hold, a HOLDPLACED
notice will be generated (focus on the library name)
3/ Edit a patron and change his/her library
4/ Generate the advanced notices (misc/cronjobs/advance_notices.pl) and
have a look at the generated notices
5/ Same of overdues notices
6/ Set IndependentBranches and use a non superlibrarian user to place a
hold. The "pickup at" should be correctly filled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchesInCategory is not used anymore and can be
removed.
Test plan:
git grep GetBranchesInCategory
should not return any result.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchesInCategory can be replaced with
Koha::LibraryCategory->libraries
Test plan:
1/ Define some 1+ group of libraries with 1+ libraries each
2/ Go on the advanced search (OPAC and Staff) and select a group of
libraries
3/ The result should be consistent and only include record from these
libraries
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
For consistency, the branchcodes method of Koha::LibraryCategory should be
named libraries.
At the moment, there is only one occurrence, in admin/branches.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Wed, 20 Jan 2016 15:00:33 +0000 (15:00 +0000)]
Bug 15631: Koha::Cities - remove getidcity and GetCities
C4::Members::getidcity and C4::Members::GetCities simply retrieved
cities info from the cities table.
The job done in members/memberentry.pl looked really weird and complicated.
Either I have missed something, or this patch can simplify it.
The expected behavior is:
1. Create a new patron => No city selected
2. Edit an existing patron => The borrowers.city value is selected
3. Add a guarantee => The borrowers.city of the guarantor is selected
4. Edit a guarantee => The borrowers.city of the guarantee is selected
Test plan:
Confirm that the expected behaviors are the ones before and after this patch.
Signed-off-by: Natasha <tasham_8@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 26 Jan 2016 02:12:38 +0000 (02:12 +0000)]
Bug 15662: String and translatability fix to Label Creator
To test:
1) Go to Tools -> Label Creator -> New label batch
2) Add an item
3) Click 'Remove selected items' button. Confirm message now reads "Please select at least one label to delete."
4) Click 'Remove duplicates' button. Confirm message now reads "Duplicate item(s) removed from batch number X: Y", all in bold.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording Ok for translatability purpose
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 26 Jan 2016 04:45:51 +0000 (04:45 +0000)]
Bug 15665: Better wording of error messages when importing MARC frameworks
UPDATE: Making error messages the same
To test:
1) Go to Admin -> MARC frameworks
2) Click Import next to any framework. You won't actually be overwriting or importing anything as this is only a string fix, so it can be an existing framework
3) Click the Import button without attaching any file. Confirm it says "Please select a spreadsheet (.csv, .ods, .xml) file." and that this makes sense to you
4) Attempt to attach a file that is not a .csv, .ods or .xml file. You should instantly get an error message saying "Please select a CSV (.csv), ODS (.ods) or XML (.xml) file." Confirm this shows up and makes sense to you
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording Ok. Works as described
Owen Leonard [Wed, 17 Feb 2016 23:27:11 +0000 (18:27 -0500)]
Bug 15671 - Show branch name instead of branch code in checkout history
When viewing the checkout history for a title the branchcode is
displayed. This patch alters the template to show the library name
instead.
To test, apply the patch and locate a title in the staff client which
has been checked out at least once. From the detail page, click
"Checkout history" in the sidebar. The "Checked out from" column of the
checkout history table should show the library name instead of the
branchcode.
Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marcel de Rooy [Mon, 1 Feb 2016 12:48:06 +0000 (13:48 +0100)]
Bug 15713: Restart zebra when rotating logfiles
Somehow, it may happen that Zebra keeps writing to the old rotated logfile
with extension .log.1. I must add that although I saw that happen (a new
log was created and was empty, while Zebra kept writing to log.1 for weeks),
I cannot reproduce it every time.
By stopping the zebra server in prerotate and starting it again in
postrotate, this should not happen at all. In practice, this implies that
your Zebra server is restarted once a week.
Note: The existing sharedscripts directive makes sure that these actions
are not executed for all individual logfiles but once for all matching
logfiles (even when running multiple instances).
Test plan:
[1] Apply the change in koha-common.logrotate to the file
/etc/logrotate.d/koha-common.
[2] Run logrotate -f /etc/logrotate.conf (forcing a logrotate).
[3] Check in zebra-error.log that your zebra server was stopped
('killed by signal 15').
[4] Verify that your Zebra server runs (read: has been restarted).
(Do a search..)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marcel de Rooy [Wed, 3 Feb 2016 14:59:02 +0000 (15:59 +0100)]
Bug 15714: Add zebra_loglevels to koha-conf.xml
This patch adds a commented zebra_loglevels line to the config file.
Behavior does not change, but an admin can easily edit the variable.
Test plan:
Nothing really changed. But if you are not so sure about that, apply the
change to /etc/koha/koha-conf-site.xml.in and run koha-create. Check
that the new koha-conf contains the line and is not messed up.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marcel de Rooy [Tue, 2 Feb 2016 15:40:06 +0000 (16:40 +0100)]
Bug 15714: Remove zebra.log and add loglevels
The file zebra.log is actually not used, because daemon's --output
parameter sends all message to zebra-output (making that stdout
goes there too and --stdout does nothing). We do not need any
differentiation (if any at all) here; behavior does not change.
Note: zebra-error will only contain the daemon's error messages and not
the zebra error messages! So you will probably only find messages about
stopping zebra in zebra-error.
The loglevels are by default none,fatal,warn and can be changed via the
zebra_loglevels config variable (read by koha-functions.sh). If you remove
'none', you will have request-messages in the log. You can also keep 'none'
and add 'request' to achieve something similar (undocumented however).
Some of the parameters passed to daemon when stopping zebra are
superfluous and have been removed.
Test plan:
[1] Remove the file zebra.log. Look at last lines in zebra-error and
zebra-output.
[2] Remove zebra_loglevels from koha-conf (if present).
Start/restart Zebra. Search to verify if Zebra runs.
Stop Zebra and check zebra-error for a new line (killed by signal 15).
[3] Add fatal,warn in koha-conf:zebra_loglevels (do not include 'none').
Start Zebra. Check zebra-output for a line "[log] zebra_start".
Do a search and check zebra-output for lines with "[request]".
[4] Verify that zebra.log did not appear again.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marcel de Rooy [Mon, 1 Feb 2016 14:36:26 +0000 (15:36 +0100)]
Bug 15714: Add get_loglevels to koha-functions.sh
Preparing for including different log levels in koha-start-zebra.
Note that the default response is none,fatal,warn; this is equal
to the options passed to zebrasrv in koha-start-zebra (for now).
Test plan:
[1] Run on the command line: source koha-functions.sh
[2] Type get_loglevels [your_instance]
By default, you should see: none,fatal,warn
[3] Add this line to your koha-conf:
<zebra_loglevels>how,are,you</zebra_loglevels>
[4] Run get_loglevels [your_instance] again.
Remove the nonsense log levels again..
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Wed, 10 Feb 2016 10:32:52 +0000 (10:32 +0000)]
Bug 15783: AddAuthorisedValue - Remove the subroutine
Test plan:
prove t/db_dependent/Koha.t
should return green
git grep AddAuthorisedValue
should not return any results
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The C4::Koha::AddAuthorisedValue is only called twice from
reports/guided_reports.pl and insert an authorised value.
This job can be achieve easily using the Koha::AuthorisedValue module.
Test plan:
1/ Create a new guided report
2/ Use an existing group and/or subgroup of reports
3/ Save
4/ Update an existing report
5/ Use an existing group and/or subgroup of reports
6/ Save
7/ Create or update an existing report
8/ Remove its assigned group and subgroup
9/ Save
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jesse Weaver [Wed, 6 Jan 2016 20:19:10 +0000 (13:19 -0700)]
Bug 15813: Fix list-context call to ...->guarantor in opac-memberentry.pl
(was: Bug 14658: (followup) fix issue with list context on DBIC call)
While working on bug 14659, it was discovered that the call to
...->guarantor in list context will cause the hash to be misaligned if
there is no guarantor.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 16 Feb 2016 04:29:59 +0000 (04:29 +0000)]
Bug 15826 - Use Font Awesome icons in confirmation dialogs - Tools
I only found one confirmation dialog, all the others use javascript.
To test:
Go to Tools -> Notices and Slips
Click Delete on a notice
Confirm Yes and No options still work as expected
Check Tools module in case I missed any confirm dialogs
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 16 Feb 2016 02:49:33 +0000 (02:49 +0000)]
Bug 15827 - Unfriendly message when saving overdue notice/status triggers
To test:
1) Go to Tools -> Overdue notice/status triggers
2) Click Save changes (you don't have to change anything)
3) Confirm message now says 'Changes saved.' which is much nicer
Sponsored-by: Catalyst IT Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Tue, 16 Feb 2016 17:49:02 +0000 (12:49 -0500)]
Bug 15828: Upload patron images is hard to read
The styling of the patron image upload form causes the text to be
smaller than it should be for the main body of a page. This patch
revises the form style and cleans up the markup a bit.
This patch also adds client-side validation of the form so that a file
upload is required, and a card number is required if an image file is
selected.
To test, apply the patch and go to Tools -> Upload patron images.
1. Confirm that the text in the form is the correct size.
2. With "Zip file" selected, confirm that submitting the form is blocked
and the file upload marked as required.
3. With "Image file" selected, confirm that submitting the form
with an empty card number field is blocked and the card number
field is marked as required.
4. Confirm that uploading zip files and single images still works
correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 16 Feb 2016 03:22:46 +0000 (03:22 +0000)]
Bug 15829 - Rotating Collections is under Patrons on Tools Home - Should be Catalog
To test:
1) Notice Rotating Collections is under Patrons & Circ on tools-home.pl
2) Apply patch and refresh page
3) Notice it is now under Catalog and is in the same position it is in on the tools sidebar menu
Sponsored-by: Catalyst IT Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 16 Feb 2016 04:01:13 +0000 (04:01 +0000)]
Bug 15830 - Move Rotating Collections actions into a drop-down list
To test:
1) Go to Tools -> Rotating Collections
2) Confirm actions (Add or remove items, Transfer, Edit, Delete) have moved into a drop down menu
3) Confirm all of the actions work as expected
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Thu, 18 Feb 2016 16:44:52 +0000 (11:44 -0500)]
Bug 15859: Move some basic MARC editor controls into settings menu
This patch moves the following options into a "Settings" menu inspired
by the one in the advanced editor:
- Switch to advanced editor
- Show MARC tag documentation links
- Show tags
- Change framework
To test, apply the patch and open a new or existing record in the
standard MARC editor.
- Test that the 'Switch to advanced editor' button option works.
- Test that the 'Show MARC tag documenation links' option works (and
that your choice persists across sessions).
- Test that the initial settings for 'Show tags' respects the
'hide_marc' system preference.
- Test that the 'Show tags' option works (and that your choice persists
across sessions).
- Test that framework switching works correctly and that the menu
correctly reflects your choice.
- Confirm that other toolbar functions work as expected, both in regular
editing mode and Fast Cataloging.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Natasha [Tue, 19 Jan 2016 00:56:56 +0000 (00:56 +0000)]
bug 12920 - Remove AllowRenewalLimitOverride from pl scripts and tt files, use Koha.Preference instead
Test Plan:
1) Apply this patch
2) Go to circulation.pl
3) Ensure you can still override renewal limits with pref enabled
4) Ensure you can not override renewal limits with pref disabled
5) Go to moremember.pl
6) Repeat steps 3-4
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Tue, 19 Jan 2016 20:29:24 +0000 (20:29 +0000)]
Bug 13474: Adding untranslatable log actions to viewlog.tt
Added 'Run'
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
(Amended to remove tab chars to make qa tools happy) Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Mark Tompsett [Sat, 23 May 2015 04:22:26 +0000 (00:22 -0400)]
Bug 14097 - Correct noise under Debian
The first four patches do not create any noise under Ubuntu 14.04 LTS.
Running on Debian Jessie:
[SNIP]
keys on reference is experimental at t/db_dependent/UsageStats.t line 88.
keys on reference is experimental at t/db_dependent/UsageStats.t line 106.
keys on reference is experimental at t/db_dependent/UsageStats.t line 119.
keys on reference is experimental at t/db_dependent/UsageStats.t line 136.
keys on reference is experimental at t/db_dependent/UsageStats.t line 153.
keys on reference is experimental at t/db_dependent/UsageStats.t line 162.
keys on reference is experimental at t/db_dependent/UsageStats.t line 587.
[SNIP]
Instead of having 'keys $foo->{bar}', 'keys %{$foo->{bar}}' was used.
TEST PLAN
---------
1) On a DEBIAN system (Jessie gives above messages)
apply the first 4 patches interactively.
2) $ prove t/db_dependent/UsageStats.t
-- trigger noise like above.
3) apply this patch
4) $ prove t/db_dependent/UsageStats.t
-- no noise triggered.
5) koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Julian FIOL [Tue, 12 May 2015 12:28:56 +0000 (14:28 +0200)]
Bug 14097: Rollback issue and warning corrected
The rollback issue came from '_count' testing.
It used a 'DROP TABLE' and 'CREATE TABLE' which implicitly do autocommit.
That's why the final rollback could not be.
This patch no longer uses t::lib::TestBuilder either because it was the cause
of the warning on Comment #1 :
"DBIx::Class::Storage::txn_rollback(): A txn_rollback
in nested transaction is ineffective! (depth 1) at
t/lib/TestBuilder.pm line 308"
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Now data is preserved, no errors.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Add unit tests to C4::UsageStats
Subroutine :
(V : tested, X : Not tested)
V NeedUpdate
V BuiltReport
X ReportToCommunity
V _count
TEST PLAN
---------
1. Apply patch
2. prove -v t/db_dependent/UsageStats.t
-- All tests should run successfully
/!\ I have 1 warning but I don't know where it can come /!\
(in cleanup) DBIx::Class::Storage::txn_rollback(): A txn_rollback
in nested transaction is ineffective! (depth 1) at
t/lib/TestBuilder.pm line 308
TEST PLAN OPTIONAL
------------------
Go check bug 13899 to see the coverage of this module.
Coverage BEFORE this patch :
Statement : 40,5%
Branch : 0,0%
Condition : 0,0%
Subroutine : 55,6%
Coverage AFTER this patch :
Statement : 81,0%
Branch : 100,0%
Condition : 100,0%
Subroutine : 88,8%
Aleisha [Mon, 18 Jan 2016 03:30:44 +0000 (03:30 +0000)]
Bug 15416: Warns on guided_reports.pl
Initialising $phase variable to be '' if not defined.
To test:
1) Go to Reports -> Guided Reports Wizard
2) Notice warns
3) Apply patch
4) Refresh page
5) Confirm warns are gone and page still works as it should
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Warns are gone. Page still works as expected
Hector Castro [Thu, 28 Jan 2016 16:40:34 +0000 (10:40 -0600)]
Bug 15693: Unnecessary punctuation mark when check-in an item in a library other than the home branch
To test:
1-Checkin an item in a library other than the home branch.
2-A message will display asking to return the item to the home branch
3-You will see the phrase "Print slip )"
4-Apply patch
5-Reproduce or repeat steps 1-2 and verify the punctuation mark is
no longer displayed
Mark Tompsett [Thu, 11 Feb 2016 02:51:26 +0000 (21:51 -0500)]
Bug 15795: C4/Members.pm is floody (Norwegian Patron DB)
From the mailing list:
"I'm working on 3.22.02 and my logs are FILLED with the following warnings:
Members.pm: Unable to load Koha::NorwegianPatronDB at /blurred/C4/Members.pm line 46., referer: http://blurred/cgi-bin/koha/acqui/booksellers.pl
admin-home.pl: Unable to load Koha::NorwegianPatronDB at /blurred/C4/Members.pm line 46., referer: http://blurred/cgi-bin/koha/admin/preferences.pl"
I agree. Looking at C4/Members.pm other warns are all prepended with $debug.
TEST PLAN
---------
1) rm Koha/NorwegianPatronDB.pm
-- quickest and dirtiest way to get the load to fail.
2) echo > ~/koha-dev/var/log/koha-error_log
-- so it will be easy to spot the log changes.
-- back up the log file if you really want it.
3) log into the staff client and go to patrons.
-- Check the log file. "Unable to load ..." will be there.
4) echo > ~/koha-dev/var/log/koha-error_log
5) sudo vi /etc/apache2/sites-enabled/{your koha site file}
-- Find your staff client entry in your apache
configuration file and add:
SetEnv DEBUG 1
6) sudo service apache2 restart
7) apply the patch
8) refresh the patron page
-- "Unable to load..." will still be there.
9) change the DEBUG value in your apache config to 0
10) sudo sevice apache2 restart
11) echo > ~/koha-dev/var/log/koha-error_log
12) refresh the patron page
-- "Unable to load..." will NOT be there.
13) git checkout origin/master -- Koha/NorwegianPatronDB.pm
-- to bring it back.
14) refresh the patron page
-- "Unable to load..." will still not be there.
15) run koha qa test tools
Signed-off-by: Philippe Blouin <philippe.blouin@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Colin Campbell [Wed, 17 Feb 2016 12:47:56 +0000 (12:47 +0000)]
Bug 15841 Circulation module's true value misplaced
1; was not at the end of the module as it should be
to ensure compilation returns true
return it to last line of code where it should be
This patch fixes an ovious mistake. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marcel de Rooy [Wed, 17 Feb 2016 15:32:03 +0000 (16:32 +0100)]
Bug 15845: Renewal date in circulation.pl is not always correct and not even used
If you have a patron category with a hard renewal date, the enrolllment
period will be zero. You cannot calculate the renewal date as is done
in the script currently.
Even more, the renewaldate template var is not even used.
Test plan:
[1] Verify that checkin/checkout works as expected.
[2] Git grep on renewaldate
[3] Check the code in circulation.pl for "$renew"
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Juan Romay Sieira <juan.sieira@xercode.es>
Patch works as expected. From a biblio detail page, the link
'OPAC view: Open in new window' opens a new browser window. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Wed, 10 Feb 2016 20:43:27 +0000 (20:43 +0000)]
Bug 13778: Putting patron lists buttons into a dropdown menu
To test:
1) Go to Tools -> Patron lists
2) If there are no lists, confirm there is a message box saying 'There are no patron lists.'
3) Create a list if you do not already have one.
4) Confirm that in the 'Actions' drop down menu next to the list, the options to 'Add patrons',
'Edit', 'Delete', and 'Print patron cards' are all there and work as expected.
Sponsored-by: Catalyst IT Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Thu, 18 Feb 2016 15:06:41 +0000 (10:06 -0500)]
Bug 15600: System preferences broken toolbar looks broken
This patch reverts some deletions made to staff-global.css in Bug 11559.
The deletions broke the appearance of the floating toolbar in system
preferences.
To test, apply the patch and clear your browser cache if necessary.
- Go to Administration -> System preferences and view a tab with enough
content to allow you to scroll and test the appearance of the floating
toolbar. Confirm that it looks correct.
- Open the advanced cataloging editor and confirm that its toolbar looks
correct.
- Open the normal cataloging editor and confirm that the floating
toolbar looks correct and works correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Tollbar looks correct
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marcel de Rooy [Mon, 25 Jan 2016 12:14:56 +0000 (13:14 +0100)]
Bug 15652: Allow current date in datepicker on opac-reserve
If you enable AllowHoldDateInFuture (and its OPAC variant), you get
an additional "Hold starts on date". In that field and in "Hold not
needed after" it was not possible to enter the current date.
Although it does not really make any difference if you leave the startdate
empty or put the current date in it, we concluded that it still makes
a psychological difference. Some patrons were confused when placing a
hold because the first date to select was tomorrow. Instead of telling
them "Yes, but you can leave it empty", we should just allow the current
date as well.
The expiration date ("not needed after") also started on tomorrow. (This
field can really be empty.) But there is actually no reason not to allow
today here too. If the patron only wants it today, why force tomorrow?
How is this arranged? Well, this is one of the simplest Koha patches ever
written. It only changes the minDate option of both date pickers in one
line from 1 to 0.
Test plan:
[1] Allow future hold dates via systempreferences.
[2] Verify that you can enter today in both fields.
[3] Put today in start and expiration date. Place the hold and verify that
you can confirm the hold, check out and check in again.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
- Apply patch
- Go to Tools > Logs (viewlog.pl)
- Verify that the actions appear in the list 'Actions'
- Verify that the new entries filter the list as appropriate (in
combination with Modules: All or with a meaningful selection in
list 'Modules')
Note for testing: You have to set a date in 'Display from' to get results
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Logs work as advertised, translated in bug 13474
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
"Run" could be more explicit.
Marc Véron [Tue, 26 Jan 2016 15:33:49 +0000 (16:33 +0100)]
Bug 15667: Fix date and branch formatting of messages in patron account display
This patch fixes the date and branch formatting of messages in patron
account display.
To verify:
Add a new message to a patron account from the 'checkouts' tab in staff,
the displayed date is not correctly formatted and the branch displays as code
instead as branch name
To test:
Apply patch, verify that the messages and branch names are properly formatted.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. The message dates in checkouts tab follow dateformat sypref
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Thu, 28 Jan 2016 15:20:07 +0000 (10:20 -0500)]
Bug 15692 - Move some patron entry form JavaScript into members.js
We should strive to keep as much JavaScript as possible out of templates
in order to keep things modular and maximize the benefits of browser
caching. This patch moves JavaScript out of the patron entry template
Two other minor edits: Missing semicolons added on the advice of JSHint.
To test, apply the patch and confirm that the following interactions
still work on the patron entry form:
1. clear_entry(): With ExtendedPatronAttributes enabled, the "Clear"
link next to any attribute form field should work to clear the field.
2. clone_entry(): With ExtendedPatronAttributes enabled and a repeatable
attribute defined, it should be possible to click the "New" link to
add another instance of that attribute's entry field.
3. update_category_code(): With ExtendedPatronAttributes enabled and an
attribute defined which is limited to a single patron category,
changing the patron category selection should correctly show or hide the
attribute entry form.
4. select_user(): When adding or editing a patron with a "Child"
category it should be possible to search for and select a guarantor
to add to the record by clicking the "Set to patron" button.
Selecting a new guarantor should change the text of the button from
"Set to patron" to "Change."
5. noEnterSubmit(): This function should be correctly preventing you
from hitting "ENTER" in any form field to submit the form.
6. guarantordelete(): When adding or editing a patron with a "Child"
category, it should be possible to clear existing guarantor
information by clicking the "Delete" button. Clicking the "Delete"
button should change the text of the adjacent button to "Set to
patron."
7. select_city(): With one or more cities defined it should be possible
to use the drop-down menu of cities to populate the city, state, zip,
and country fields.
8. Date of birth entry should have a maximum date limit of yesterday.
The drop-down menu of years should go back 100 years.
9. Client-side validation rules should be in effect, requiring that a
valid email address be entered in the primary email, secondary email,
and alternate address email fields.
10.When editing a patron, the "Add manual restriction" link should
display the form for adding a manual restriction, and clicking the
"Cancel" link should hide it.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Nick Clemens [Thu, 28 Jan 2016 21:58:37 +0000 (21:58 +0000)]
Bug 15699 - Course reserves instructors should be in form "Surname, Firstname" for sorting purposes
This patch changes the order of the name fields and adds a span class around
each in case of library wanting to customize further
To test:
1 - Enable course reserves
2 - Add some courses with instrcutors
3 - Note they are of form "Firstname Surname"
4 - Apply patch
5 - Note the change
6 - Note span tags
7 - Note you can hide firstname by adding to intranet user js: $(".instr_firstname, instr_separator").hide();
Sing-off note: This patch displays the names as advertised on cgi-bin/koha/opac-course-reserves.pl Sorting
the names would need some more actions but seems not to be intended by this patch. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
projects / koha.git / log