Jonathan Druart [Wed, 8 Apr 2015 14:21:15 +0000 (16:21 +0200)]
Bug 9139: New subscription form - Does not check form on the first page
The vendor and Record input try to sent the form if the focus is on the
inputs (normal behavior).
But the form is on 2 pages, and the popup message ask you to fill info
on the second page when you are on the first one. This does not make
sense.
This patch suggests to launch search when the enter key is press on
these inputs.
Test plan:
1/ Create a new subscription
2/ Put the focus in the Vendor input and press enter: the vendor search
popup should appear
3/ Put the focus in the Record input and press enter: the record search
popup should appear
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Tue, 28 Apr 2015 20:49:33 +0000 (22:49 +0200)]
Bug 14074: Format 'suggested on' date in suggestion list correctly
One of the dates (suggested on) in the list of
suggestions in staff is not correctly formatted.
To test:
- Create one or many suggestions
- Check the list of suggestion, especially in the
'Suggested by - on' column
- Verify the date is not displayed according to
the dateformat preference
- Apply patch
- Verify the problem is fixed
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 27 Apr 2015 11:03:22 +0000 (13:03 +0200)]
Bug 11576: Make "manage" translatable - serials-collection
If a subscription is irregular, a tab with "manage" is displayed on the
serial collection page.
But this string is not translatable.
Test plan:
1/ Go on the serial collection page of an irregular subscription (or
create one).
2/ Note that the first tab was named "managed", it's now "Manage".
3/ Update a po lang file and confirm you see the string and you are able
to translate it.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Mon, 4 May 2015 09:32:18 +0000 (11:32 +0200)]
Bug 14128: Capitalization: Guided Reports - step 2 - Build A Report Title 'Build a report' should display with all steps
The tile displayed only with steps #1 and #2
This patch adds the title to the following steps.
To test:
Home > Reports
Click on 'Build new'
Step through steps 1 - 6
Verify that title displays with each step.
Sponsored-by: Universidad de El Salvador Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To verify and test:
Go to Home > Reports
Click on 'Build new'
Verify that the title in Step 1 and to display with correct capitalization
Sponsored-by: Universidad de El Salvador Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Fri, 27 Mar 2015 15:21:39 +0000 (11:21 -0400)]
Bug 13822: Patron autocomplete search is severly limited
The script that returns data for the patron autocomplete does not use C4::Members::Search. Instead it uses bespoke code that does not behave like the traditional search and is very limited in how it can search.
If, for example, I search for "Kyle Hall" in the standard search, I would get "Kyle Hall" back as a result. For the autocomplete search, I will not.
This script should use C4::Members::Search to provide better searching and to keep the code base DRY.
Test Plan:
1) Enable the system preference CircAutocompl
2) Create a user with the first name "Test" and the surname "User"
3) Perform a checkout autocomplete search for "Test User"
4) Note you do not get the user as a result
5) Apply this patch
6) Try different combinations of "Test" and "User" such as
Test User
User Test
U Test
Test U
etc.
7) Note these searches now work
Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nick Clemens [Sat, 7 Feb 2015 17:49:29 +0000 (12:49 -0500)]
Bug 12911: batch_id for new labels batches can be asssigned to several batches
Currently batch_id is assigned upon creation of a new batch object. This patch leaves batch_id as 0 at creation and adds a check when adding items. If batch is new then batch_id is created then
Test plan:
1 -In one browser window, go to tools->label creator and click the new batch button
2 - Before adding items, open a new browser, and go tools->label creator and click the new batch button
3 - Note that both batches have the same number listed
4 - Add an item to the first batch - you should now see one item in the batch
5 - Add an item to the second batch, you should see two items in the batch
6 - Apply patch and repeat steps 1&2
7 - Note that neither batch lists a batch number
8 - Add an item to the first batch, you should see one item and a batch number
9 - Add an item to the second batch, you should see one item and a new batch number
Patch behaves as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 20 Aug 2014 15:05:19 +0000 (17:05 +0200)]
Bug 12743: ACQ: default values for catalogue records
At the moment, it is possible to create records in acquisitions, but the
ACQ framework is only used for items created in this module.
This patch allows to defined default values in the ACQ framework for
records created on the acquisition module.
Test plan:
1/ Make sure you have the ACQ framework created (otherwise create it
from the default framework).
2/ Define a default value for a field (for instance 099$z=1).
3/ Go in the acquisition module and create a new order from a new
record.
4/ Fill mandatory information and save.
5/ Go on the detail page of this record and verify the default value
exist.
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Fri, 8 May 2015 08:08:02 +0000 (10:08 +0200)]
Bug 13758: Correct KOHA::VERSION in OverDrive.pm
Correct $KOHA::VERSION to $Koha::VERSION.
Also, passing this string to LWP::UserAgent is wrong. It expects key/value
pairs. Since this string is apparently intended as an agent, this patch
passes it as such.
Note: The OverDrive has unfortunately no unit tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested this change in the perl debugger with just these lines:
use C4::External::OverDrive;
C4::External::OverDrive::_request();
Printed $ua->agent while stepping into sub _request.
Without the agent change, the adjusted Koha string would just be ignored
and I would still have "libwww-perl/6.04" as agent. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Wed, 6 May 2015 17:56:30 +0000 (13:56 -0400)]
Bug 14103: Improved testing coverage
As per Chris' comment #17, this improves the testing coverage.
Same test plan as comment #16, but add:
TEST PLAN SUPPLEMENT
--------------------
1) $ prove -v t/db_dependent/Borrower_Discharge.t
-- notice only 5 tests, and generate_as_pdf not tested.
2) Apply this patch.
3) Retest as per comment #16
-- this will test the error and no error cases
tweaked in Koha/Borrower/Discharge.pm
4) remove PDF::HTML
$ sudo apt-get purge libpdf-fromhtml-perl
5) $ prove -v t/db_dependent/Borrower_Discharge.t
-- 7 tests, all successful
6) add PDF::HTML
$ sudo dpkg -i /path/to/libpdf-fromhtml-perl...
-- depends on how you get it. vary accordingly.
7) $ prove -v t/db_dependent/Borrower_Discharge.t
-- 7 tests, all successful
-- Note that is was a different 7th test. :)
8) koha qa test tools
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Wed, 6 May 2015 05:08:04 +0000 (01:08 -0400)]
Bug 14103: PDF::FromHTML is conditionally required on UseDischarge systempreference
Since this is only in generate_as_pdf of Koha::Borrowers::Discharge, it made
sense to change it from a use to a require (avoiding a compile time error),
and placing it inside the eval where the PDF is generated, thus capturing the
problem in the koha error log.
TEST PLAN
---------
1) Log in to staff client
2) Koha Administration -> Global system preferences -> Local Use
3) Lower the Version number by 1, but DO NOT CLICK SAVE.
4) At the command line, sudo apt-get purge libpdf-fromhtml-perl
5) Back in the staff client, click save.
6) Every looks great until you attempt to log in. KABOOM!
7) Apply patch
8) Log in to staff client
-- YAY!
9) Koha Administration -> Global system preferences -> Patrons
10) Make use the useDischarge is set to Allow
11) Find a patron with nothing checked out.
12) There is now a Discharge tab on the left at the bottom.
13) Click the 'Generate Discharge' button.
-- nice error message
-- check koha error log file for the ugly @INC missing message
14) At the command line, reinstall PDF::FromHTML
(I built my own with cpan2deb: sudo dpkg -i /path/to/libpdf-fromhtml-perl_...)
15) In the staff client, click the 'Generate Discharge' button again.
-- PDF is created as expected. All is well.
16) run koha qa test tools.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 22 Apr 2015 11:56:28 +0000 (13:56 +0200)]
Bug 14042: Get rid of the home made pagination in the auth type admin
This patch removes the home made pagination and introduces datatables on
this page.
Test plan:
Go to the authority type admin page and confirm there is a beautiful
table.
Confirmed... Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 24 Mar 2015 15:12:32 +0000 (16:12 +0100)]
Bug 4281: Reports dictionary supports only 1 field selection
The reports dictionary allows the user to select several fields, but
only 1 is used.
The interface is quite confusing.
This patch removes the multiple selection and permit to select only 1
field.
Test plan:
1/ Create a report dictionary (reports/dictionary.pl)
2/ On the step 3, confirm that only 1 field can be selected
Confirm there is no regression on this tool.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 23 Apr 2015 14:57:31 +0000 (16:57 +0200)]
Bug 11464: Prevent wrong "nothing to save" message on saving syspref
Sometime you get the "Nothing to save" message when clicking on the "save
all preferences" button, even if something has changed.
On irritating behavior is the middle click: if you use the middle click
to paste some text in the input, the "keyup" event won't be trigger.
This patch replaces the "keyup" event with the "change", which works
as we want here.
The issues:
1/ Search for "wanted" (admin/preferences.pl?op=search&searchfield=wanted)
Empty the input, click save
Type something and remove it
You are able to save, but nothing has changed
2/ Put something in your selection buffer and use the middle click to
paste it in the input.
No change detected.
Test plan:
Confirm the issues are fixed and you don't find any regression
Note that now the "(modified)" string is displayed when the input loses
the focus.
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 24 Apr 2015 10:12:57 +0000 (12:12 +0200)]
Bug 11890: Click events on titles does not work as expected
The browse results feature (bug 10404) modified the click events on
titles on the search result page (intranet).
It introduced bad behaviors:
1/ ctrl+click on a title does not open a new tab
2/ middle click on a title does open a new tab but the browser is not
displayed.
Note that this patch is not perfect, it fixes the 2 bad behaviors but
the ctrl+click gives the focus to the new tab (could go against the
preferences of the users).
Test plan:
1/ On the staff interface, launch a search (catalogue/search.pl?q=XXX)
2/ When middle-clicking on a title, a new tab should open. On this tab
the browse result feature should be displayed
3/ Same for cltr+click
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 5 Jan 2015 15:10:57 +0000 (10:10 -0500)]
Bug 13516: Display issue for search results with items both checkout out and lost
If the staff search results, if an item is both checked out and lost,
the result will appear as two item lines where one line has the lost
status and the other line has the rest of the item's data.
Test Plan:
1) Check an item out to a patron
2) Mark the item as lost *without* removing the item from the patron's
record, either by using longoverdue.pl or by editing the itemlost
field in the database directly.
3) Perform a search where that item will be in the results
4) Note the improper display of the item's data
5) Apply this patch set
6) Reload the search restults
7) Note the item now displays correctly
Signed-off-by: Nick <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 5 Jan 2015 15:05:48 +0000 (10:05 -0500)]
Bug 13516: Tidy relevant code block
Signed-off-by: Nick <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Mon, 4 May 2015 06:18:47 +0000 (08:18 +0200)]
Bug 14125: Fix template problems on csv profiles help page
Page uses TAGS Directive in order to print TT directives
in the manual without having them interpreted, but fails
to switch back/change all following TT code, causing
problems in displaying the file correctly.
See TT documentation:
http://www.template-toolkit.org/docs/manual/Directives.html#section_TAGS
As [- ... -] showed up in translations, I chose to switch back
instead of changing the TT variable and INCLUDE.
To test:
- Go to tools > csv profiles
- Open the help page
- Verify the link to the manual includes the version and works
- Verify the footer shows up correctly with the edit buttons
Works as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Mon, 20 Apr 2015 10:21:12 +0000 (12:21 +0200)]
Bug 14018: Ordering from suggestion shows 'copy. year:2014'
This patch fixes some minor display issues in 'Add order from a suggestion'
To test:
- Add order form a suggestion
- The copyright date iss dispayed like 'copy.year:2015'
- Apply patch
- The copyright date now displays as (copyright sign) 2014, similar to the display in suggestion management
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 14075: Undefined value creates noisy warns in C4::AuthoritiesMarc
This match sets $sortby (previously undefined value) as an empty string to get rid of the warns.
To test:
1) Go to a URL such as http://localhost:8080/cgi-bin/koha/opac-authorities-home.pl?op=do_search&type=opac&operator=contains&value=a&marclist=any&and_or=and
2) Notice the warns in the error log
3) Apply patch
4) Reload URL
5) Notice page still works but no warns in error log
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: I would have done $sortby //= '';
But this works too. :)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 27 Apr 2015 14:55:32 +0000 (16:55 +0200)]
Bug 12135: Fix suggestions table width
The trick to update the suggestions table width is outdated since jQuery
UI has been updated.
Test plan:
0/ Don't apply this patch
1/ Go on the suggestions page (suggestion/suggestion.pl), change tabs:
the table width is wrong
2/ Apply this patch
4/ Repeat 1 and confirm the width is now updated.
Signed-off-by: Christopher Brannon <cbrannon@cdalibary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
The table sizes still vary slightly, but this is an improvement. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 22 Apr 2015 11:22:58 +0000 (13:22 +0200)]
Bug 10976: Fix typo itemtype vs itemtypes
When creating a new report, the limit step let you choose
itype|itemtype.
But it should be itype|itemtypes.
If you try to create a guided report and you choose this option as a
limit, you will get a warning on saving it:
Errors found when processing parameters for report:
itype: The authorized value category (itemtype) you selected does not exist.
Looking at the code: reports/guided_reports.pl l.657
elsif ( $authorised_value eq "itemtypes" ) {
Test plan:
0/ Don't apply the patch
1/ Create a guided report, select Koha itemtype as a limit(step 4)
2/ Confirm you get the error when saving
3/ Apply the patch and repeat step 1
4/ There is no error and the report should work correctly
Tested with steps in comment #4/#5, error is gone after applying patch. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Mon, 4 May 2015 06:00:54 +0000 (08:00 +0200)]
Bug 14129: templates.readme is outdated
The file templates.readme dates back to CSV and
HTML::Template times and is outdated.
To test:
- Verify the file is outdated and removed by this patch.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
If noone spotted the outdatedness of this file until now I
agree with Katrin that we should get rid of it and maybe
create something similar in the wiki. The patch works as
advertised.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 28 Apr 2015 13:14:49 +0000 (15:14 +0200)]
Bug 12253: Fix MARCUrls in basket
At the OPAC and the intranet, the urls don't be displayed anymore.
The variables used in the templates are not the good ones (MARCurlS vs
MARCURLS).
Test plan:
1/ On the intranet side, add some urls to some records
2/ Add these records to the basket
3/ Add records without urls defined
4/ Go on the basket view, click "more details"
5/ You should see the urls displayed
6/ Repeat steps 4-5 at the OPAC
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: 856$u displays now in intranet and OPAC. :)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 13 Apr 2015 10:56:24 +0000 (05:56 -0500)]
Bug 13982: Checkouts table not sorting on correct column
The "Date Due" column for checkouts is using the column index 1 to sort by.
This column is the one that is used for grouping items into today's checkouts
and previous checkouts. This is definitely not the column that should be used.
Instead, we should be using column index 2, which contains the raw unformatted
due date.
Revised Test Plan:
1) Find a patron with no checkouts
2) Check out something as due the beginning on the month.
3) Check out something as due the end of the month.
4) Check out something due tomorrow (hopefully not end of month)
-- so you should have 2015-04-01, 2015-04-30, and 2015-04-14
(for example)
5) Attempt to sort by due date
-- Note the sorting is incorrect
6) Apply this patch
7) Clear your browser cache
8) Reload the page
9) Attempt to sort by due date again
-- Note the sorting works correctly this time
10) Verify there are no regressions with bug 13908
-- this will require finding a patron with many checkouts,
playing with the Circulation system preferences
previousIssuesDefaultSortOrder and todaysIssuesDefaultSortOrder,
and understanding what the four different cases mean with
respect to actually manually sorting the 'Due Date' column.
NOTE: I did not do step 10, Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 14148: marc import broken if plugins are not enabled
Bug 12412 introduced a way to use plugins to generate MARC records
out of any arbitrary format. But failed to properly check for
a valid configuration (plugins_enabled entry on koha-conf.xml, and
even the UseKohaPlugins syspref).
This patch makes tools/stage-marc-import.pl test for the required
configuration before attempting to create the Koha::Plugins object.
To test:
1/ Make sure you don't have a plugins_enabled entry on your koha-conf.xml file
2/ On master, browse to tools/stage-marc-import.pl
=> FAIL: You get a nasty "Can't call method "GetPlugins"..." error
3/ Apply the patch and reload
=> SUCCESS: Stage MARC for import page renders correctly
Repeat with plugins_enabled == 0 and == 1. Also UseKohaPlugins enabled/disabled.
It should work as expected.
Regards
Tomas
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
simith [Fri, 27 Feb 2015 13:09:09 +0000 (08:09 -0500)]
Bug 13364: Add a call number browser in item edition page
When editing an item, the call number browser search for existing call number. If it shows a line is green between two calli numbers, the call numbers searched is available. If the call number is highlighted in red, it means that it already exists. This can be used to avoid repeated call numbers in your collection.
The call number browser also shows its position relative to the rest of the collection.
Sponsored-by: CCSR
To test :
1) Go to MARC bibliographic framework
Home › Administration › MARC frameworks
2) Click in MARC structure (Default framework)
3) Search field 952 and click in subfields
4) Edit subfield o (Full call number)
5) Click Display more constraints
6) In Others Options, Plugin, Choose cn_browser.pl and save changes
7) Search a record and edit its items
Validate : three points (…) beside Full call number input
8) Click in …
Validate : if it can not find the given call number, a green line is shown. Otherwise, the given call number is highlighted in red.
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Magnus <magnus@enger.priv.no>
Works as advertised. QA scripts pass.
Tested together with other patches. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch>
Bug 13364 - fix datatables.inc
http://bugs.koha-community.org/show_bug.cgi?id=13364 Signed-off-by: Magnus <magnus@enger.priv.no>
Works as advertised. QA scripts pass.
Tested together with other patches, works as expected. Signed-off-by: Marc Véron <veron@veron.ch>
Bug 13364 - Add a call number browser in item edition page - QA fixed
Tested together with other patches. Signed-off-by: Marc Véron <veron@veron.ch>
Bug 13364 - Add a call number browser in item edition page - QA fixed II
Tested together with oter patches. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Mon, 27 Apr 2015 22:03:55 +0000 (18:03 -0400)]
Bug 14066: Correct and optimize
As far as I can tell $sunday is never used. And it seemed to be
scoped to only _init.
The remaining hashiness was cleaned up for the $return_by_hour.
TEST PLAN
---------
1) Apply both patches
2) (Skip this one - file does not exist / MV) prove -v t/db_dependent/Calendar.t
3) prove -v t/db_dependent/Holidays.t
4) prove -v t/Calendar.t
5) perlcritic -3 Koha/Calendar.pm
-- the message corresponds to a comment in the code already
and not this change.
6) run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 27 Apr 2015 11:42:20 +0000 (13:42 +0200)]
Bug 14066: Remove the Readonly[::XS] dependency
The Readonly and Readonly::XS package are only used in Koha::Calendar.
IMO the added value of there packages does not justify their purpose.
Test plan:
1/ Remove Readonly and Readonly::XS
2/ Open the calendar and confirm you don't get any error concerning missing
dependency
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Fri, 24 Apr 2015 04:40:46 +0000 (00:40 -0400)]
Bug 14057: Inventory is painfully slow
This patch is a rough start. I believe it runs exponentially
faster, but its equality to the previous version needs to be
tested before I clean it up to acceptable standards.
Nested hashes of hashes was being a debugging nightmare.
Moved the SQL select to C4::Koha.
Changed the GetItemsForInventory to have a hashref parameter.
Added interface, in case there is a need for 'opac' vs. 'staff'.
Bug 14056: Small punctuation error in description for deleting a holiday
This patch just inserts a semi-colon into the description so that it makes more grammatical sense.
Test plan:
1) Go to Tools --> Calendar
2) Create or find a holiday, click on it so the editing options come up
3) Click on the question mark link to show the description for the option "Delete the exceptions on a range"
4) Confirm that this now has a semi-colon and reads "... Be careful about your scope range; if it is oversized you could slow down Koha."
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12192: Template toolkit code in HTML attributes is picked up into po-files
This patch gives a partial solution for this problem.
It ignores strings like "[% something %]", but not
"[% IF ( value ) %][% value %][% END %]"
We get 100+ strings less to translate
To test:
1) Update translation files for your preferred language
2) Apply the patch
3) Update again
4) Compare, you must find 100+ strings removed from
translation files
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified all strings removed from the po files were
pure TT. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds DISCHARGE sample message to de-DE sample_notices.pl
(in GErman wording)
To test:
1) prove xt/sample_notices.t, it fails
2) apply the patch
3) prove again, this time no errors
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Right wording :)
Fixed version
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds DISCHARGE sample message to de-DE sample_notices.pl
To test:
1) prove xt/sample_notices.t, it fails
2) apply the patch
3) prove again, this time no errors
As original Bug 8007 sample message this is not translated,
so a German counter patch is welcome.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
As noted, a German counter patch is preferred. :)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Change the values for borrower_number, template_id and layout_id to something that exists in your system.
Without patch, the URL leads to a software error:
Can't use an undefined value as a HASH reference at /usr/share/kohaclone/patroncards/create-pdf.pl line 118.
With patch, a PDF with the patron card is created.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: This does NOT deal with the case where borrowernumber,
template_id, or layout_id are invalid. This only deals with
the case where they do exist.
Invalid borrowernumber still gives same error.
Invalid template_id or layout_id gives error on line 111.
Those are beyond the scope of this bug.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Mon, 4 May 2015 09:45:45 +0000 (11:45 +0200)]
Bug 14127: Typo in message preference form - "mesage"
This path fixes the typo.
To reproduce and test:
Go to a patron's detail page
The message appears as hint in column-header 'Digests only (i)'
Sponsored-by: Universidad de El Salvador Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test: Verify that the strings are properly replaced.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed some tabs. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test
1) Go to dir 'intranet-tmpl/prog/en/modules/acqui/neworderempty.tt'
line 268 and check the typo "To notify on reveiving:"
2) Apply the patch
3) Repeat step 1 and check if the typo is fixed
Sponsored-by: Universidad de El Salvador Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 22 Apr 2015 13:39:55 +0000 (09:39 -0400)]
Bug 14044: Escape json strings for patron searches
In a couple of patron searches, the address is displayed.
If the address contain invalid json characters, DataTables won't manage
to parse the results and display them.
This patch makes the templates more readable by creating a BLOCK instead
of a long line and escape the invalid json characters calling the TT
plugin (To.json).
Test plan:
Edit a patron and add something like:
patron <address> \123 ☎ ⚑
in the address field.
Search for this patron using the main patron search (members/member.pl)
and the guarantor search.
Confirm that a result with this patron is correctly displayed.
Regression test: Since Koha::Template::Plugin::To::json is modified,
confirm that the add users to basket search (on acqui/basket.pl?basketno=X
click on the "Add user" button) still works as expected.
Signed-off-by: Christopher Brannon <cbrannon@cdalibary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Sat, 4 Apr 2015 20:43:40 +0000 (16:43 -0400)]
Bug 11574 - Clean up Printing Lists
Removes extraneous stuff from prints - toolbars, breadcrumbs, etc.
To test:
1. make a list
2. print it to a file (from OPAC), observe wasted paper
3. apply patch
4. print list, compare
5. if you like it, sign off. ;)
Patch cleans up OPAC list printing as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
NOTE: Made functional again. Turns out my issues were a result of
cached CSS pages. Tested in IE and Firefox successfully.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 14006: about.pl checks the wrong zebra index mode
When setting zebra_bib_index_mode to grs1 I get two warnings when not applying the patch:
"The <zebra_bib_index_mode> entry is set to grs1. GRS-1 support is now deprecated and will be removed in future releases. Please use DOM instead by setting <zebra_bib_index_mode> to dom (full reindex required)."
"You have set <use_zebra_facets> but the <zebra_bib_index_mode> is not set to dom. Falling back to legacy facet calculation."
When applying the patch a third warning appears in addition to the two previous ones:
"The <zebra_bib_index_mode> entry is set to dom, but your system still appears to be set up for grs1 indexing."
Seems like the patch does what it should to me regarding the configuration mismatch warning.
Signed-off-by: Eivin Giske Skaaren <eskaaren@yahoo.no> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Julian Maurice [Tue, 22 Jul 2014 12:43:16 +0000 (14:43 +0200)]
Bug 12671: Guess next serial date when there are several issues per unit
This guess uses the following algorithm
1/ Get the number of days remaining from first issue of this unit of
time until the end of the unit of time (using 7 days for week, 28 for
month and 365 for year)
2/ Divide it by the number of issues per unit
3/ Take the integer part of the result, this is the number of days to
add to previous serial published date
This patch also try to guess the date of the first issue of a unit of
time. Before that, it was:
- for week: monday of week
- for month: 1st day of month
- for year: 1st day of year
Now it uses firstacquidate.
Example:
firstacquidate = 1970-01-07 (wednesday)
unit = week
issuesperunit = 2 (2 issues per week)
From wednesday to sunday, there are 4 days so we add 2 days to get the
next date.
The next dates should be:
- 1970-01-09 (+ 2 days)
- 1970-01-14 (wednesday of next week)
- 1970-01-16 (+ 2 days)
- ... and so on
Test plan:
1/ Go to numbering pattern creation page (Serials -> Manager numbering
patterns -> New numbering pattern)
2/ In "Test prediction pattern" fieldset, set subscription length to 50
issues (this avoid to compute the next 1000 dates, which can take time)
3/ Fill first issue publication date
4/ Choose the frequency you want to test
5/ click on "Test pattern" button
6/ Check that the dates are correct
7/ Repeat steps 3-7 until you think you have tested enough cases
Interesting frequencies to test:
- 1/day
- 1/week
- 2/week
- 6/week (firstacquidate should be monday or tuesday, or the generated
dates will be the same for all the week)
- 1/month
- 2/month
- 3/month
- 1/year
- 2/year
- 3/year
----------------
Sign off report:
----------------
-Followed the test plan. Unit tests work. Also trying some more strange
frequencies with our librarians:
5/year, 43/year, 10/year.
-Received all serials for a subscription and found no errors.
-Received some serials with frequency 2/month pre-patch, getting publication
date as 1st of every month for each magazine. Having applied the patch,
publication dates started working mid-subscription for new magazines.
-Works well and fine! Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Julian Maurice [Mon, 21 Jul 2014 15:06:33 +0000 (17:06 +0200)]
Bug 12671: Refactor GetNextDate
A much needed refactoring. Thanks for seeing the effort through. Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nicolas Legrand [Thu, 26 Mar 2015 11:15:33 +0000 (12:15 +0100)]
Bug 9089: show suggestion number
Show suggestion number on suggestion management.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 7 Apr 2015 15:03:46 +0000 (17:03 +0200)]
Bug 10388: Does not display 'null' after editing an item on receiving
After editing an item on receiving, 'null' is displayed if no value is
defined for a field. It should be blank.
Test plan:
0/ Set AcqCreateItem to 'ordering'
1/ Go on the receipt page page
2/ Edit an item
3/ Does not fill all values
4/ Confirm that undefined values are replaced with an empty string
NOTE: I think you meant receive. Editing requires at least clicking
the dropdown value, even if you don't change it before
clicking save. null's appeared. Post patch application was
able to get nulls to disappear. :)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 12 Jun 2014 16:18:41 +0000 (12:18 -0400)]
Bug 12412: Add ability for plugins to convert arbitrary files to MARC from record staging tool
Many libraries would like to be able to import various types of files as
MARC records ( citations, csv files, etc ). We can add a new function to
the plugins system to allow that kind of behavior at a very custom
level.
Test Plan:
1) Ensure you have plugins enabled and configured correctly
2) Installed the attached version 2.00 of the Kitchen Sink plugin
3) Download the attached text file
4) Browse to "Stage MARC records for import"
5) Select the downloaded text file for staging
6) After uploading, you should see a new area "Transform file to MARC:",
select "Example Kitchen-Sink Plugin" from the pulldown menu
7) Click 'Stage for import"
8) Click 'Manage staged records"
9) You should now see two new MARC records!
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - interesting new feature. Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 8 Dec 2014 15:31:03 +0000 (16:31 +0100)]
Bug 13421: Add the creation time for virtual shelves
Test plan:
1/ Execute the updatedb entry
2/ Create a list
3/ Go on the shelve list and confirm that the creation and last
modification time are now displayed.
4/ Confirm that you are able to sort the list by creation/modification
time.
Applied on top of 13419 (rebased updatedatabase.pl)
Works as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13773: add stock number to details and items display
This patch adds stocknumber (named Inventory number in interface)
to details table and items display if it exists.
Test scenario:
1. find item(s) which have inventory number assigned
2. verify that you don't see inventory number in items display
3. apply this patch
4. verify that inventory number is now available
Signed-off-by: Nicole <nicole@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Sun, 19 Apr 2015 18:24:05 +0000 (20:24 +0200)]
Bug 14011: Triggering slip print with enter key collides with 'barcode submitted'
To reproduce:
- Log into staff client
- Find a client with 0 checkouts
- Print a slip (or cancel printing it)
- Attempt to type in a barcode to checkout
-- annoying modal screen pops up
'barcode submitted' message will be triggered each time
you try
To test:
- apply patch
- try to reproduce issue
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Mon, 27 Apr 2015 10:38:40 +0000 (12:38 +0200)]
Bug 13810: Change collate for tagsubfield (utf8_bin)
Before bug 11944, the marc_subfield_structure.tagsubfield column had a
specific collate: utf8_bin. It has been introduced by
commit 67e20d82ffdfcd69344ec30696bebc51c00d863c
Date: Sun Jun 22 16:35:48 2008 -0500
DB Bump 094 - bug 2268 -- allow mixed case subfield labels in MARC21
by changing db column collation.
This change should be kept and Koha should continue to allow and create
subfields with the same letter but different case sensitivity.
What does this patch:
1/ To prevent the updatedatabase entry 3.19.00.006 to fail if subfields
with different case sensitivity already exist in the DB, the table is
managed separately from others.
2/ To update DB which have already pass this dbrev, a new entry will be
create to update the specific collate for this column.
Test plan:
1/ a. With a 3.18 DB, create subfield 'a' and 'A' for the same field
b. Execute the updatedatabase.pl script. 3.19.00.006 should not fail
anymore
2/ a. With a master DB (3.19.00.006 has already been executed), create
subfields 'a' and 'A'. You should get an error.
b. Apply this patch, execute the DB entry and try again 2/a. you
should be able to create the second subfield.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 29 Apr 2015 08:15:50 +0000 (10:15 +0200)]
Bug 14069: Drop existing primary key on items if exists
On old databases, the issues table has a primary key on itemnumber.
The DBrev 3.19.00.028 (Bug 13790 - Add unique id issue_id to issues and
oldissues tables) has to remove it before adding the new primary key
Test plan:
1/ Make sure you have an old DB, or add primary key (issues.itemnumber)manually
on a DB created before 3.19.00.028.
2/ Execute the updatedatabase.pl script
3/ You should not get any error and the primary key on itemnumber should
have been removed and the new one created as expected.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
Tested using a 3.4 db (3.0404000)
Interestingly, it gives a similar error on the same table but
on another (older $DBversion = "3.05.00.009";) update
1) Pre-patch, 3.4 DB, updatedatabase from master, errors
(older)
DBD::mysql::db do failed: Multiple primary key defined at installer/data/mysql/updatedatabase.pl line 4435.
(13790)
DBD::mysql::db do failed: Multiple primary key defined at installer/data/mysql/updatedatabase.pl line 10166.
DBD::mysql::db do failed: Unknown column 'issue_id' in 'order clause' at installer/data/mysql/updatedatabase.pl line 10170.
DBD::mysql::st execute failed: Unknown column 'me.issue_id' in 'field list' at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1593.
DBIx::Class::ResultSetColumn::max(): Unknown column 'me.issue_id' in 'field list' at installer/data/mysql/updatedatabase.pl line 10174
2) Post-patch, same conditions
(only older)
DBD::mysql::db do failed: Multiple primary key defined at installer/data/mysql/updatedatabase.pl line 4435.
There are other warnings, but nor related with keys.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 22 Apr 2015 08:47:15 +0000 (10:47 +0200)]
Bug 13887: Display the due date as a due date + sort on info
The due dates should be displayed as due dates :)
i.e not displayed with 23:59
On the way, this patch fixes the sort on the info column.
The column is now sorted using the due dates
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 22 Apr 2015 08:39:19 +0000 (10:39 +0200)]
Bug 13887: Move the caption into a h2
With the DT filter, the caption is between the table and the filter.
It looks better with the caption as a h2 on top of the table.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 22 Apr 2015 08:39:09 +0000 (10:39 +0200)]
Bug 13887: Fix sDom to display what is needed in the table
1/ Add the information 'showing x to y of z'
2/ Remove some lost pixels
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nick Clemens [Wed, 22 Apr 2015 01:07:59 +0000 (21:07 -0400)]
Bug 13887: Tab fix and "intranet-tmpl" to "[% interface %]"
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nick Clemens [Sat, 21 Mar 2015 17:41:21 +0000 (13:41 -0400)]
Bug 13887: Add datatables to item specific holds table
This patch adds datatables functionality to the item specific holds table
To test:
1 - Apply patch
2 - Attempt to place an item specific hold for a patron
3 - Note that columns are now sortable and searchable
4 - Ensure that you can place both specific and next available holds as before
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Tue, 21 Apr 2015 15:19:06 +0000 (17:19 +0200)]
Bug 13889: Provide parameter $infos in cronlogaction()
(Alternative for patch Bug 13889: Log with parameters)
To test:
- Apply patches interactive and skip following patch: Bug 13889: Log with parameters
- Tweak a cron job in order to call cronlogaction twice, one with a param at the beginning of the cron ob, e.g.
cronlogaction("This is my message") and one without param.
- Run this cron job.
Result: You should have two entries in the log, one with and one without additional information after the path and name of the calling script.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Mon, 20 Apr 2015 08:32:06 +0000 (04:32 -0400)]
Bug 13889: Add unit tests
Previous commit was lacking test coverage of new function.
TEST PLAN
---------
1) Apply all the patches
2) prove -v t/db_dependent/Log.t
-- should be success.
3) koha qa test tools
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Sun, 22 Mar 2015 12:55:00 +0000 (13:55 +0100)]
Bug 13889: Add information about cron jobs to system log
This patch adds information about cron jobs performed and make it viewable
under Home > Tools > Logs ("Browse system logs")
To test:
Apply patch
- Got to system preferences and set 'CronjobLog' to: [Log] information from
cron jobs.
- Run some cron jobs
- Go to Home > Tools > Logs
- Verify that you have a selection 'Cron jobs' in drop-down 'Module'. Select it
with Action "All" and Submit.
- Output should show Date/time and info about Cron jobs
Rebased to work on top of Bug 6911 (conflict in viewlog.tt) /MV
Rebased after applying patch for Bug 6911 /MV
Conflicts resolved:
misc/cronjobs/overdue_notices.pl
misc/cronjobs/cleanup_database.pl
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
- Merge both patches, and fix updatedatabase.pl
- Works as described. Provide intersting feedback from cronjob scripts.
--
Modified version taking in account syspref CronJobLog. Handling simplified by introducing a convenience sub cronlogaction in C4/Log.pm /MV
Amended to take in account comments #11, #12, #13 /MV
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nicole [Sun, 29 Mar 2015 20:15:16 +0000 (15:15 -0500)]
Bug 13886: (QA followup) Remove tabs
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nick Clemens [Sat, 21 Mar 2015 15:31:14 +0000 (11:31 -0400)]
Bug 13886: Add ability to merge records directly from cataloging search
This patch adds a merge button and checkboxes to the cataloging search results screen to allow librarians to merge directly from these reults
To test:
1 - Apply patch
2 - Perform a cataloging search
3 - Try to select 1 or more than 2 records to merge and check that you get an error
4 - Select 2 records to merge and confirm the correct records are passed to the merge tool
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Tue, 30 Sep 2014 15:35:56 +0000 (11:35 -0400)]
Bug 9528: Add delivery branch to the place hold display
When viewing the list of a patron's holds from the circulation or patron
detail page the pickup library is not listed. This patch adds a column
to the table of holds which shows the pickup branch.
This patch also removes some unnecessary markup from the generation of
the table and corrects an instance where the term "reserve" was used
instead of "hold."
This patch also modifies the language describing an item which is marked
waiting at the current library: "Item is waiting here" instead of "Item
waiting."
To test, add several holds to a patron's account with various pickup
locations.
- Confirm that those pickup locations are correctly displayed
under the Holds tab in Circulation.
- Check in and confirm a hold which is to be picked up at the current
branch. Confirm that the revised language appears.
- Confirm that table sorting works correctly.
Signed-off-by: Nick <Nick@quechelibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Thu, 11 Dec 2014 14:47:01 +0000 (09:47 -0500)]
Bug 13442: Facet links broken when collection code limit is used
Any search limits including a ccode will break the search facts.
Test Plan:
1) Run an advanced search using a ccode limit
2) Try using any of the facet links of the left
3) Note they are broken
4) Apply this patch
5) Refresh the results
6) Note the facet links are no longer broken
Note: I have not been able to reproduce this issue on my own test
system, but have noted the problem on at least a dozen Koha servers.
I could not reproduce the bug either, but I saw it on the Bywater Demo (comment #1).
Applied patch and tested facets, no problems found, signing off Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Can not reproduce the problem, but I can also not find a regression.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 8 Apr 2015 08:04:40 +0000 (10:04 +0200)]
Bug 6059: Don't permit to change the quantity when items are created on ordering
If items are created on ordering, the quantity for uncertain prices
should not be editable.
Test plan:
0/ Set AcqCreateItem to "on ordering"
1/ Create a basket and add an order with 1+ items
2/ Mark it as uncertain prices
3/ Go on the uncertain prices page for this vendor
(acqui/uncertainprice.pl?booksellerid=X)
4/ Confirm you are not allowed to update the quantity
5/ Change the price and save
6/ Confirm the quantity is still correct
Set the pref to another value and confirm the behavior has not changed.
NOTE: Tested with 'on placing order' and 'on receiving order'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Fri, 6 Mar 2015 09:37:04 +0000 (10:37 +0100)]
Bug 7843: (QA followup) Make news selection persistant
This patch makes the following changes:
1) If there is no logged in patron, the RSS link states it is for
system-wide news.
2) If a patron is logged in, the RSS link states it is for system-wide
news *and* news for the patron's home library.
3) The patron's home branch code is embedded in the RSS feed url so
he or she no longer needs to be logged in for us to know what branch's
news to pull.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes an invalid URL when clicking
on RSS feed.
To test:
1) Using Nicole words :)
If you visit : http://mykoha/cgi-bin/koha/opac-main.pl
then the RSS feed works.
If you're on http://mykoha and you click the rss icon you
get : http://mykoha/opac-news-rss.pl which is a 404 page.
2) Apply the patch
3) Repeat 1, error is now fixed
Signed-off-by: Pierre <tredok.pierre@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nicole [Tue, 3 Mar 2015 11:05:38 +0000 (03:05 -0800)]
Bug 7843: (follow up) Improve RSS feed language
The RSS button used to read ' RSS for the librarys general newsfeed.'
This included one grammatical error and I think included more words
than most average people would read. This patch simplifies it to say
'RSS for Library News.'
To test:
* Apply all patches
* Review RSS feed button's text on main page under news
Signed-off-by: Pierre <tredok.pierre@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
projects / koha.git / log