Joonas Kylmälä [Mon, 31 Aug 2015 05:06:16 +0000 (05:06 +0000)]
Bug 14526: (follow-up) add a space before equals sign
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The change in MoveReserve from the previous patch begs for a test.
Here we add some to Reserves.t.
In all six tests we place a hold, move it and check the reserves again.
Depending on the status of ConfirmFutureHolds, and the reservedate the
hold should be moved or not.
Test plan:
Run the unit test.
Bonus: If you run Reserves.t by applying this patch but without the first
patch that changed MoveReserve, tests 60 and 61 should fail:
not ok 60 - MoveReserve filled future hold now
not ok 61 - MoveReserve filled future waiting hold now
This may further illustrate the need of the first patch.
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 14526: MoveReserve should look at future holds too
At checkout a hold for the same borrower is considered to be filled.
It is consistent to do the same for holds of the same borrower within
[ConfirmFutureHolds] days (if non-zero).
This goal is achieved by adjusting the CheckReserves call within
MoveReserve, adding the lookahead parameter.
I used this occasion to revisit other calls of CheckReserves:
- transferbook: no need to add lookahead; a future hold should not block
a transfer;
- CanBookBeIssued: no lookahead; future hold does not block an issue;
- CanBookBeRenewed: idem.
- GetOtherReserves (only used in circ/returns): this call might be a
candidate for lookahead too, but I leave that for another report. It is
in the context of checkin and transfer, not checkout.
Test plan:
[1] Set ConfirmFutureHolds to zero days. (You may also need to enable
AllowHoldDateInFuture.)
[2] Place a hold with borrower A on biblio X for tomorrow. Also place a hold
with borrower B on X for today. (Use biblio level holds.)
[3] Check out item Y of X to borrower A. Ignore the warning for borrower B
and do not cancel the hold of B (so: confirm checkout).
Verify that X has still two holds.
[4] Check in Y (without confirming a hold).
[5] Enable ConfirmFutureHolds, say 2 days.
[6] Check out Y to A again. Ignore the warning for B (no cancel). Verify that
X now only has one hold for borrower B (the hold for A was filled).
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Mon, 25 May 2015 15:01:46 +0000 (17:01 +0200)]
Bug 13972: Follow-up - Add unit tests for changed parts of SendAlerts
To test:
- prove t/db_dependent/Letters.t
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Katrin Fischer [Mon, 25 May 2015 12:53:29 +0000 (14:53 +0200)]
Bug 13972: Include fields from subscription and serial table in serial notification email
Currently it's not possible to include information about which
issue has arrived in the serial notification notice the patron
can subscribe to from the OPAC.
The patch makes the fields from the subscription and serial
table available to the notice template.
In order to be able to print information about the correct
issue, the GetAlert has been modified to expext the serialid
as externalid when the module is issue.
git grep SendAlerts (only call with 'issue' is in Serial.pm)
To test:
- Add a subscription, select a patron notification template
- Search for the record in the OPAC
- Go to the subscription tab - More details
- Subscribe to the notification
- Edit the notice template you selected for the subscription
- add fields from subscription
- add fields from serial (serial.serialseq has the issue
information)
- Receive an issue for the subscription
- Check that you have received the notification and that
all information has been printed correctly
NOTE: notice is sent directly, not through the message_queue
Followed test plan, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Fri, 10 Jul 2015 15:11:48 +0000 (16:11 +0100)]
Bug 12965: Prevent to erase an existing item type
On creating an item type, if it already exists, it will replace the
existing one.
This patch prevent that and display a message to the interface.
Note: The fields are lost.
Test plan:
1/ Create an item type 'AAA', description 'AAA'
2/ Edit it, update the description with 'BBB'
3/ Create an item type 'AAA' with a description 'CCC' => you should get
a warning "already exists".
Works well, no errors
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com> Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Warning message is triggered.
Adding, editing and deleting item types still works. Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Mon, 13 Jul 2015 16:34:53 +0000 (17:34 +0100)]
Bug 13943: Prevent the deletion of items if the user cancels
On the edit items page, there is some weird JS code: if the user clicks
on the delete link and then cancel, the item is deleted anyway.
It's caused by the following JS code in browser.js
$('a[href*="biblionumber="]').click(function (ev) {
ev.preventDefault();
window.location = $(this).attr('href') + '&searchid=' + me.searchid;
});
Test plan:
- Do a search with multiple results
- Go to the detail page (make sure results browser shows up!)
- Use the "Edit items" link from the toolbar
- Delete an item (try both way)
- Choose "cancel"
- Delete an item (try both way) and confirm the deletion
You should see the browser after the deletion and the item should have
been deleted correctly.
- Edit an item (try both way)
You should see the browser (did not work before this patch)
Note: Before this patch, the 2 first columns didn't contain the
edit/delete item links, now it's only the 1st one.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Much better! Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Wed, 26 Aug 2015 12:09:53 +0000 (14:09 +0200)]
Bug 11247: Add a simple unit test for TransformHtmlToXml
The unit test is db dependent (as Jonathan correctly remarked),
since the sub checks a preference.
Test plan:
Run t/db_dependent/Biblio/TransformHtmlToXml.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Srdjan [Thu, 14 Nov 2013 06:10:30 +0000 (19:10 +1300)]
Bug 11247: Fix calls of TransformHtmlToXml
The ind_tag of TransformHtmlToXml is unused.
Some calls to this function incorrectly revert indicator and ind_tag (which
is not a problem when both are empty..)
Patch of Srdjan Jankovic, amended and signed off by Marcel de Rooy.
The following calls are fixed:
call in acqui/addorder.pl: switched indicator with ind_tag
call in acqui/addorderiso2709.pl replaced too
acqui/finishreceive.pl replaced too
These calls are fine:
two calls in cataloguing/additem.pl are fine
call in serials/serials-edit.pl is fine
call in tools/batchMod.pl is fine
The folllow-up patch adds a simple unit test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
With AcqCreateItem=='placing an order', tested if adding an order still
worked (covered both addorder.pl and addorderiso2709.pl).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Tue, 18 Aug 2015 17:40:31 +0000 (18:40 +0100)]
Bug 14584: Encoding broken with system preferences
The pref are double encoded.
From bug 12411:
"This will fix the encoding issues existing in 3.14 and 3.16.
The issue still appear in master but is fixed by bug 11944."
They should not have been pushed together.
Test plan:
1) You need an accentuated language installed.
2) Go to NoLoginInstructions pref, and add some accentuated message like
"Hélo médames é mècieüx"
3) refresh opac home page, message should be gibberish
4) apply patch. Message should be ok now.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Works as expected.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Wed, 19 Aug 2015 15:24:32 +0000 (16:24 +0100)]
Bug 14696: useless use of String::Random in catalogue/search.pl
Bug 10404 adds the use of String::Random to catalogue/search.pl but bug
11369 removes it without removing the import line.
Test plan:
git grep String::Random catalogue/search.pl
should not return anything
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Mon, 24 Aug 2015 09:07:37 +0000 (10:07 +0100)]
Bug 14709: Do not access to C4::Context->userenv from the commandline
The script dies with
Can't use an undefined value as a HASH reference at tools/export.pl
line 149.
if it is called from the command line.
This is introduced by bug 13040.
The C4::Context->userenv is not defined in this case.
Test plan:
Execute the script using the command line.
With the patch applies you should not get the error.
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Tue, 4 Aug 2015 09:00:51 +0000 (10:00 +0100)]
Bug 14205: Deleting an Item/Record does not remove link to course reserve
A constraint is missing on the course_reserves.ci_id field.
This patch adds it and removes orphan rows.
Test plan:
0/ Don't apply the patch
1/ Login to Staff Site.
2/ Go to Course Reserves
3/ Create Course
4/ Add Reserve
5/ Go to item added (delete item/record)
6/ Refresh Course (see no items attached)
7/ Delete Course
8/ See course still listed in the courses (Not deleted)
9/ Apply the patch and execute the updatedatabase entry.
10/ Delete the Course
Note that the course has correctly been removed.
NOTE: Make sure to set the UseCourseReserves system preference to test.
Tested before (problem existed) and after (problem solved) update.
Dropped DB, web installed, and put in dummy data and retested.
Problem solved.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Tue, 18 Aug 2015 08:08:09 +0000 (09:08 +0100)]
Bug 14685: Fix set guarantor for a child or professional accounts
Bug 13970 removed some useful code to automatically set the guarantor
when creating a child.
But finally there is a better way to do the job, we just need to assume
that only children or professional can have a guarantor.
Test plan:
1/ Create an adult patron and add a child.
2/ The guarantor info should be retrieved and set on the child creation
page.
3/ Create an organization and add a child
4/ The guarantor info should be retrieved and set on the adult creation
page.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
This patch catches both cases, thanks Jonathan!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Kyle M Hall [Fri, 5 Jun 2015 11:50:26 +0000 (07:50 -0400)]
Bug 14337: AllowRenewalIfOtherItemsAvailable counts holdable not for loan items when checking renewability
AllowRenewalIfOtherItemsAvailable checks
C4::Reserves::IsAvailableForItemLevelRequest to see if the item is
holdable, which catches not for loan values less than 0 ( i.e. holdable,
but not circ-able ). However, since this feature is about
actually checking out items to patrons, we should not count *any* not
for loan items when deciding if the available items will satisfy all
current holds.
Test Plan:
1) Enable AllowRenewalIfOtherItemsAvailable
2) Create a record with two items
3) Check out one item to a patron
4) Ensure the item is renewable
5) Place a hold on the record
6) The item should now be non-renewable
7) Add a second item to the record, but with a not for loan value < 0
8) Note the checkout is still renewable
9) Apply this patch
10) Note the checkout is now non-renewable
Works ok.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Joonas Kylmälä [Tue, 25 Aug 2015 07:24:54 +0000 (07:24 +0000)]
Bug 14703: Holidays description shows \r\n for every new line
Adds a new line for the holiday's description instead of the string
\r\n.
Test plan:
1. In tools -> Calendar look at some holiday's description
(Do a new holiday with description of multiple lines if
there is not already)
2. Notice that there is characters \r\n if someone has put
a newline in the holiday's description
3. Apply patch
4. See that the new lines show there now nicely
Sponsored-by: Vaara-kirjastot Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended slightly: no need to replace title. Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Martin Persson [Sun, 16 Aug 2015 22:01:05 +0000 (00:01 +0200)]
Bug 11584: Syspref WYSIWYG, dropdown added
This patch adds the 'Htmlarea' type to the dropdown box
introduced by bug 14268, commit 6e3bcc38.
Sponsored-By: Halmstad County Library Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a system preference "UseWYSIWYGinSystemPreferences" to the Staff Client tab.
By default, it is off, which means that the TinyMCE WYSIWYG editor won't be shown for system
preferences with a type of "htmlarea".
However, when it's on, it will show the editor for "Local Use" preferences with a "htmlarea"
type, and for other system preferences in the "Opac", "Circulation", and "Staff Client" tabs,
which I have re-assigned. (Basically, I grepped for HTML and changed the type for all
the system preferences I found except for "IntranetNav", "OpacCustomSearch", and "OPACSearchForTitleIn",
as a WYSIWYG editor would potentially break the output for these system preferences or
add no value to them...)
_TEST PLAN_
0) Run `perl installer/data/mysql/updatedatabase.pl` after setting your environmental variables
1) Check the Opac tab to make sure that the WYSIWYG is nowhere to be seen
2) Change the "UseWYSIWYGinSystemPreferences" preference in "Staff Client" to "Show"
3) Refresh the Opac tab and notice that many system preferences now have a WYSIWYG editor
4) Try typing some text into these fields
5) Note that it gets marked as "modified"
6) Save the preference, and refresh the page
7) Note that the content has been saved
8) Take a look at how it's rendered on the actual webpage!
Signed-off-by: Martin Persson <xarragon@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
David Cook [Tue, 14 Jul 2015 04:17:48 +0000 (14:17 +1000)]
Bug 11584: Add TinyMCE license to about.pl
This patch adds the TinyMCE license info to about.pl
Signed-off-by: Martin Persson <xarragon@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This plugin is part of the TinyMCE distribution. It used to be in Koha, but
then someone removed it. It's useful for preferences like "opacheader" though.
*If you're using anything except IE, this should work super well. If
you're using IE, it'll probably only work for keyboard input and dragging
text within the editor box but not from outside of it. IE has worse
security, so you can probably paste using the context menu paste.
*While I think a WYSIWYG editor can be useful, there might be times
where the content is displayed differently than it is in the editor
because of higher level CSS and Javascript.
Signed-off-by: Martin Persson <xarragon@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart [Fri, 24 Apr 2015 08:02:19 +0000 (10:02 +0200)]
Bug 11880: Select what has been selected before
The previous patch wants to select the barcode option when the user is
on the item search for label, in all cases.
So even if 'title' is selected, a search done, and there is no result,
the barcode index is selected anyway.
In this case, the title option should be kept.
Test plan:
Confirm that the barcode option is the default choice, but other values
are kept if the search does not return any result.
Followed test plan, behaves as expected. Tested with all choices. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Frédérick [Fri, 28 Feb 2014 21:21:46 +0000 (16:21 -0500)]
Bug 11880: Select the barcode index by default then searching for label items.
Test case:
* Go to "Tools -> Label creator -> Manage batches"
* Click on the "New batch" button
* Click on the "Add item(s)" button
* A search window should open. The "Barcode" value should be selected in the the selectbox.
Followed test case. Patch behaves as expected. Signed-off-by: Marc Veron <veron@veron.ch> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 13697: Syspref to not add a fee when a patron changes to a category with enrolment fee
By default this syspref is "Do" to keep the previous behaviour.
Test plan :
1/ create 2 categories (A & B). B with enrolment fee
2/ create a patron in category A
3/ change the patron category from A to B
4/ check that the patron has an enrolment fee to pay
Apply the patch
1/ create a new patron in category A
2/ change the patron category from A to B.
3/ check that the patron has an enrolment fee to pay
4/ change the system preference 'FeeOnChangePatronCategory' to 'Don't';
5/ create a new patron in category A
6/ change the patron category from A to B
7/ check that the patron has no enrolment fee to pay
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Winona Salesky [Fri, 5 Jun 2015 02:30:49 +0000 (22:30 -0400)]
Bug 13383: 100/110/111 changes to XSLT
Test plan:
1) Apply this patch
2) Ensure you are using the default XSLT setting for the staff and opac search results and record details
3) Find or create a record with MARC tags 100,110,111
4) Perform an opac search that would show the record in the search results.
5) Click title to review record.
6) Note the fields updates 100,110,111 to show subfields a,b,c,d,q and t.Multiple fields are separated by span class=separator |. Includes 100$j and handles multiple relator terms/codes.
7) Repeat steps 4 - 6 for the staff interface
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 14737: wrong permissions required for cn_browser.pl plugin
The cn_browser.pl cataloguing plugin only searches for used callnumbers
on the bibliographic database. There is no need for this plugin to
require special permissions besides access to the catalog.
To test:
- Link the cb_browser.pl cataloguing plugin to 952$o in your favourite cataloguing framework
- Login with a superlibrarian user
- Try the plugin
=> SUCCESS: you can use it
- Login with a user that has the full 'tools' permission
- Try the plugin
=> SUCCSES: you can use it
- Login with a user that doesn't have full 'tools' permission
but has the normal catalogue and cataloguing permissions.
- Try the plugin
=> FAIL: you are requested to login with a different user
- Apply the patch
- Retry
=> SUCCESS: you can use it
- Sign off :-D
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Joonas Kylmälä [Wed, 19 Aug 2015 11:00:27 +0000 (11:00 +0000)]
Bug 14579: 'You are not logged in' should link to log in page
To test:
1) Go to any page on the staff client and make sure you are not logged in (ie an error page, cgi-bin/koha/errors/400.pl)
2) Try click on 'You are not logged in |'
3) Notice it is not really a link and doesn't take you anywhere
4) Apply patch
5) Refresh page
6) Click on what now says 'Log in |'
7) Confirm that you are redirected to the intranet log in page
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Aleisha [Mon, 3 Aug 2015 02:23:29 +0000 (02:23 +0000)]
Bug 14634: Warns when placing hold on record with no items
To test:
1) Create a new record in Cataloguing
2) When done, instead of adding an item to the record, click on the Holds tab in the left nav
3) Notice warns
4) Apply patch and refresh page
5) Click on Holds tab again
6) Notice warns are gone and page still works
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Warns disappear; note that the display of the error message is still ugly.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 11190: sitemap.pl -- Generate a Catalog sitemap
Add a script sitemap.pl to process all biblio records from a Koha
instance and generate Sitemap files complying with this protocol as
described on http://sitemaps.org. The goal of this script is to be able
to provide to search engines direct access to biblio records. It avoid
leaving search engine browsing Koha OPAC and so generating a lot of
traffic, and workload, for a bad result.
Thanks Magnus for testing, and helping to improve the script design.
[2015.04.16] Switch from Moose to Moo.
[2015.08.20] Add complete (more) UT.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
All options to the script work as expected and the output looks
good. Nice enhancement!
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I signed-of my own patch after fixing various QA errors.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: replace tabs with spaces. Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Fri, 17 Jul 2015 11:37:33 +0000 (07:37 -0400)]
Bug 14557: Add holds count to holds tab
Some librarians have expressed that it would be helpful if the holds tab
displayed the count of holds for a record.
Test Plan:
1) Apply this patch
2) Note the Holds tab for a record now displays the number of holds for that record
Signed-off-by: Jason Robb <jrobb@sekls.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Fri, 17 Jul 2015 11:35:28 +0000 (07:35 -0400)]
Bug 14557: Clean up biblio-view-menu.inc
Signed-off-by: Jason Robb <jrobb@sekls.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 14714: Add tab-completion to koha-mysql command
This patch introduces tab-completion in bash to the koha-mysql
command. It completes using valid instance names. It stops completing
once an instance name is chosen (i.e. it respects the fact that
koha-mysql accepts only one instance name as parameter).
To test:
- Have a packages install (kohadevbox works)
- Run:
$ . debian/koha-common.bash-completion
- Type
koha-mysql <tab>
=> SUCCESS: You are prompted valid instance names for completion.
- Sign off :-D
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 14361: koha-restart-zebra fails and probably breaks upgrade
This patch fixes the koha-restart-zebra and koha-stop-zebra scripts
by adding pidfiles folder to the test is_zebra_running.
It also adds pidfiles to the test is_indexer_running so that
koha-rebuild-zebra will work properly.
Test plan:
1) check if zebrasrv is running, get pid of zebrasrv
ps ax | grep zebrasrv
2) In my case, there was also a warning on the about.pl page on a fresh
install: Error message from Zebra: 1011 (bad credentials)
3) try to restart zebra
koha-restart-zebra instancename
You will get a msg :
Zebra does not appear to have been running for instancename
Starting Zebra server for instancename
4) check again if zebrasrv is running
ps ax | grep zebrasrv
and see that pid has not changed, thus it is not restarted
5) Apply patch
6) repeat 4) and watch now how pid has changed
If there was a warning on about.pl it should now be gone
Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Good catch Benjamin! It works as expected with the patch.
Kyle M Hall [Fri, 22 Aug 2014 17:29:28 +0000 (13:29 -0400)]
Bug 12632: Hold limits ignored for record level holds with item level itemtypes
The crux of the issue is that if you are using item level itemtypes, but
are allowing biblio levels holds, those holds do not have items.
So, in CanItemBeReserved, when Koha counts the number of holds to
compare against the given rule, it will always give 0 ( except of course
for found holds, and the occasional item-level hold ).
So the query is saying "link each of these reserves to the reserved
item, and count the number of reserves this patron where the itemtype is
DVD". However, since these are all record level reserves, there are no
items to link to, and so when it looks for all reserves this and item
whose itemtype is DVD, it finds zero reserves!
This patch solves the problem by looking first at the item level
itemtype, and if it does not exist, then it looks at the record
level itemtype. For installations using record level itemtypes, the
behavior remains unchanged.
Test plan:
1) Enable item level itemtypes
2) Create two records with one item each of a given itemtype
3) Create a single issuing rule and limit the holds allowed for that
itemtype to 1
4) Place a record level hold on your first record
5) Attempt to place a record level hold for the same patron on your
second record. You should not be able to but you can!
6) Apply this patch
7) Repeat step 5, note you can no longer place the hold!
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Mon, 24 Aug 2015 06:54:39 +0000 (08:54 +0200)]
Bug 9809: [QA Follow-up] Remove constrainttype from 14464 tests
Some additional unit tests of bug 14464 still included a constraint
in the AddReserve calls.
Test plan:
Run Reserves.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Fri, 21 Aug 2015 08:47:19 +0000 (10:47 +0200)]
Bug 9809: [QA Follow-up] Remove an erroneous call to GetReserveFee
The call to GetReserveFee in opac-reserve.pl is useless in its current
form. The first parameter undef takes care of receiving 0.
But note that the user is warned correctly for the charge via param
variable RESERVE_CHARGE on the opac form.
When the hold is placed, AddReserve calls GetReserveFee. So if the routine
would work correctly, we would not need this extra call in opac-reserve
in the whole place. Unfortunately, the routine is not working correctly.
I will submit a fix for GetReserveFee under a new report (14702).
Test plan:
[1] Add a hold fee to some category.
[2] Check the warn for placing a hold on such a book in OPAC.
[3] Observe that the actual fee is not charged. This is a current bug and
it will be addressed on report 14702.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Marcel de Rooy [Fri, 21 Aug 2015 07:23:53 +0000 (09:23 +0200)]
Bug 9809: [QA Follow-up] Remove warnings from Hold.pm
Resolves two warnings on a uninitialized found column:
holds: Use of uninitialized value in string eq at /home/koha/testclone/Koha/Hold.pm line 53., referer: http://test.rijkskoha.nl:28080/cgi-bin/koha/circ/circulation.pl?borrowernumber=152
holds: Use of uninitialized value in string eq at /home/koha/testclone/Koha/Hold.pm line 74., referer: http://test.rijkskoha.nl:28080/cgi-bin/koha/circ/circulation.pl?borrowernumber=152
Test plan:
Run t/db_dependent/Hold.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Tue, 30 Jun 2015 12:19:29 +0000 (08:19 -0400)]
Bug 9809: Update AddReserve prototype to remove constraint parameter
Test Plan:
1) Apply this patch set
2) prove t/db_dependent/Circulation.t
3) prove t/db_dependent/Holds.t
4) prove t/db_dependent/Holds/LocalHoldsPriority.t
5) prove t/db_dependent/Holds/RevertWaitingStatus.t
6) prove t/db_dependent/HoldsQueue.t
7) prove t/db_dependent/Reserves.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
AMENDED: An else branch in reserve/placerequest.pl was removed. This had
the effect of making it no longer possible to place an any hold in the
staff client.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified placing a biblio level and an item level hold.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Tue, 30 Jun 2015 11:30:32 +0000 (07:30 -0400)]
Bug 9809: Remove reserveconstraints references from C4::Reserves
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Tue, 30 Jun 2015 12:25:29 +0000 (08:25 -0400)]
Bug 9809: Update unit tests
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Tue, 30 Jun 2015 11:32:56 +0000 (07:32 -0400)]
Bug 9809: Remove DBIC module for reserveconstraints
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Tue, 30 Jun 2015 12:51:55 +0000 (08:51 -0400)]
Bug 9809: Update Schema files
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Kyle M Hall [Tue, 30 Jun 2015 11:34:35 +0000 (07:34 -0400)]
Bug 9809: DB Updates
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
http://bugs.koha-community.org/show_bug.cgi?id=12372 Signed-off-by: Liz Rea <liz@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 12372: (QA followup) Standardized argument parsing for koha-mysql.
http://bugs.koha-community.org/show_bug.cgi?id=12372 Signed-off-by: Liz Rea <liz@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Ian Bays <ian.bays@ptfs-europe.com> Signed-off-by: Liz Rea <liz@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 13791: (QA followup) Plack support requires Apache 2.4.8+
The Apache 2.4 documentation says UDS support for ProxyPass has been
introduced in Apache 2.4.7. That's what is shipped by Koha's supported
Debian / Ubuntu versions.
But it is not true, empiric tests and even the changelog for the apache
project says the feature got introduced in 2.4.8. So to avoid breakages
I raised the version number test on the apache files to 2.4.8.
New bugs will be filled for dealing with this if we find it necessary.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch adds tab-completion in bash for the koha-plack command.
After the --start, --stop, --restart and --disable switches it only offers
plack-enabled instances. And disabled instances to --enable.
--help and -h just finish end the completion.
--quiet and -q are trickier to implement. They will work (be offered)
only before the action switches.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 13791: make koha-common init script aware of plack
This patch makes the packages' koha-common script aware of plack.
It does so by relying on koha-list --plack to know which instances
have Plack configured, and uses the koha-plack script to manage
the running daemons.
It also introduces a plack_status function to check the status of
the Plack daemon when called:
$ servive koha-common status
Regards
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch adds the --plack and --noplack option switches to koha-list
for filtering instances to be listed.
This is particularly important for init scripts and cronjobs.
To test:
- Play with koha-list --plack and koha-plack --enable/--disable and verify that
koha-list returns the expected results.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch adds an include to each VirtualHost definition (OPAC and Intranet)
and a variable definition, taking advantage of Apache 2.4.x features.
The instance name is reused inside the includes providing a simple way of
dealing with the apache <-> plack configuration.
A check for the right apache version is introduced, in the for of an IfVersion block:
<IfVersion >= 2.4>
--- Plack configuration here ---
</IfVersion>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 13791: Plack out-of-the-box support on packages
This patch introduces a koha-plack script that controls running Plack
processes for each instance. They are run using 'starman', listening
on a Unix Domain Socket (UDS):
/var/run/koha/<instancename>/plack.sock
The plack configuration file[1] is expected to be on:
/etc/koha/plack.psgi
and is installed by the package.
It also adds the following helper functions to koha-functions.sh:
- is_plack_enabled
- is_plack_running
Done:
- koha-plack script
- suitable psgi file
To test this patches you will need to install
- starman
- libplack-middleware-reverseproxy-perl
[1] Yeah, a single file. Because we will be relying on multiple mount
points for each "app" (i.e. 'opac' and 'intranet', and 'api' ;-) )
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jonathan Druart [Wed, 19 Aug 2015 14:42:10 +0000 (15:42 +0100)]
Bug 14566: Fix permissions in patronimage.pl
There is no permission needed to access the patronimage.pl script.
This means anybody cans access to the patron's images.
Test plan:
Add an image to borrowernumber 42 and call
/cgi-bin/koha/members/patronimage.pl?borrowernumber=42
If you are logged in with borrowers permissions, you will see the image,
otherwise you will get a blank page with a 403 header.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test Plan:
1) Apply this patch
2) Ensure you are using the default XSLT setting for the staff and opac record details
3) Find or create a record with MARC tags 130/240/730
4) Perform an opac search that would show the record in the search results.
5) Click title to review record.
6) Fields show subfields a,d,f,g,h,k,l,m,n,o,p,r,s,t with multiple fields separated by span class=separator |
7) Repeat steps 4 - 6 for the staff interface
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 14693: Contract.t should generate dates based on current date
The current test for still-active contracts fails because it was written
with fixed dates, which already passed :-D
This patch calculates the current date, and uses it to generate a future
one, so the tests serve their purpose no matter what the current date is.
To test:
- Run:
$ prove t/db_dependent/Contract.t
=> FAIL: activeonly compares contractenddate with now(), and fails
because a fixed 2015-07-31 is writteng on the test data
- Apply the patch
- Run:
$ prove t/db_dependent/Contract.t
=> SUCCESS: the sample data has been calculated using the current date
and the tests pass.
- Sign off :-D
Edit: added missing use DateTime::Duration,
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This script does not need a few modules:
IO::File; CGI::Session; C4::UploadedFile.
Warnings can be enabled (with Modern::Perl).
Indirect object syntax replaced for CGI and CGI::Cookie.
Moved the $reply line upwards (not needed twice anymore).
Test plan:
[1] Log in as staff user. Run the URL cataloguing/merge_ajax.pl.
You should see the JSON reponse in the browser.
[2] Logout. Run the URL again. Blank screen.
[3] Go to addbooks.pl (Cataloging Search). Search something, select two
biblios and click Merge selected, etc.
Signed-off-by: Joonas Kylmala <j.kylmala@gmail.com> Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
David Cook [Tue, 21 Apr 2015 00:34:52 +0000 (10:34 +1000)]
Bug 14031: Itemnumber should be a numeric search in ccl.properties
This patch changes the "itemnumber" alias so that it acts like
"itemnumber,st-numeric". That is, it always does a numeric search.
_TEST PLAN_
The best way to test this patch is to apply the patch and then run
"make upgrade", I suspect. As this will refresh your "ccl.properties".
However, this patch is actually really small, so you can just apply
it manually to an existing "ccl.properties" if you rather save time.
Basically, you just need to do the following steps:
0) Do a search for "itemnumber:<insert real indexed itemnumber here>"
1) Note that you can't retrieve any results
2) Change your ccl.properties to say "itemnumber 1=8010 4=109"
3) Repeat the search for "itemnumber:<X>"
4) Note that you now retrieve your result
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Tested on a gitified package install. Made the change to
/etc/koha/zebradb/ccl.properties manually. After this change
I can successfully search for "itemnumber:1".
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Liz Rea [Wed, 5 Aug 2015 23:03:43 +0000 (11:03 +1200)]
Bug 14652: change gender specification from "N/A" to "None specified"
To test:
Edit a patron in the intranet, note that the gender options are "Female," "Male," and "None specified"
Setting "None specified" should result in the gender not being shown on the patron detail page (unchanged functionality)
In the opac, log in and click the "your personal details" tab, and note that the gender options are "Female," "Male," and "None specified"
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test Plan:
1) Apply this patch
2) Ensure you are using the default XSLT setting for the staff and opac search results and record details
3) Find or create a record with MARC tags 336,337,338
4) Perform an opac search that would show the record in the search results.
5) Click title to review record.
6) Adds fields 336, 337 and 338 to staff and opac details. Adds comma between multiple subfields and | with class='separator' between multiple datafields (e.g. two 336 fields)
7) Repeat steps 4 - 6 for the staff interface
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, no errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Kyle M Hall [Fri, 7 Aug 2015 15:39:19 +0000 (08:39 -0700)]
Bug 14661: space needed in added to staff side cart message, if items added are already in cart
There is a missing space in the "added to cart" message on the staff side, when you are adding 2 or more items to the cart, where 1+ is already in the cart and 1+ is not in the cart. I verified that this is not an issue in the OPAC cart function.
Test:
1. Search for records in your system.
2. In search results, select the first two records and choose Add to Cart.
3. Message returned, "2 item(s) added to your cart", as expected.
4. Keep those 2 records selected, and select 2 additional records (so 4 total records selected), and choose Add to Cart again.
5. Message returned, "2 item(s) added to your cart2 already in your cart".
6. Apply this patch
7. Repeat steps 1 through 4
8. Note the two phrases are on separate lines
Signed-off-by: Heather Braum <hbraum@nekls.org> Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Jesse Weaver [Tue, 9 Jun 2015 22:22:05 +0000 (16:22 -0600)]
Bug 14464: Add ability to cancel waiting holds from checkin screen
Test plan:
1. Ensure that ExpireReservesMaxPickUpDelayCharge is set to 0.
2. Place a hold (doesn't matter whether it's a bib/item-level hold),
then confirm the hold by checking it in.
3. Check in the item again, and hit Cancel.
4. The reserve in question should be cancelled.
5. Repeat steps 2-4 twice, once after setting
ExpireReservesMaxPickUpDelayCharge to a nonzero value and again
after clicking the "Forgive fees for manually expired holds"
checkbox.
A fine should only be applied when the syspref is enabled and the
checkbox is not checked. Also, the checkbox should only appear after
enabling the syspref. And finally, the checkbox should remember whether
it is checked across multiple checkins, same as the "Forgive overdue
charges" and "Book drop mode" checkboxes.
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Removed 2 debugging lines. Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Winona Salesky [Mon, 11 May 2015 14:47:36 +0000 (10:47 -0400)]
Bug 14181: MARC21 773 -- Display when ind1 = 0 or blank
Display 773 in opac and staff details when ind1 !=1
Test plan
=========
1/ Add a new record which uses the 773 field to an instance running
master code. (the selected MARC framework should have the 773's
relevant sub-fields enabled and visible on staff client, opac and
the editor).
2/ Set ind1 as '0' (zero). The note should be displayed both on OPAC
as well as the staff client.
3/ Reset ind1 with a non-zero value or leave it blank. The display
note should no longer be visible from either client or opac.
4/ Apply the patch.
5/ Repeat step #1 and #2. The note is displayed on staff and opac.
6/ Repeat step #3. The display note should be visible on both staff
and opac.
7/ run koha-qa.pl -c 1 -v 2
Note : For #1 above, the following LoC record was used:
http://www.loc.gov/marc/bibliographic/examples.html#monographic
The patch applied cleanly and performed as expected.
The koha-qa.pl gave OK as results.
Signed-off-by: Indranil Das Gupta <indradg@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Aleisha [Wed, 12 Aug 2015 00:00:35 +0000 (00:00 +0000)]
Bug 14484: warns when changing patron pw
To test:
1) Go to any patron's page, click Change password
2) Notice warns in error log
3) Apply patch, reload page
4) Click Change password
5) Notice warns are gone and page still works correctly
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 14646: Koha::RecordProcessor should accept more than one filter
The docs say that Koha::RecordProcessor accepts more than one filter
at a time. But as the regression tests show it doesn't.
This is really important to extend its usage in record processing
(either to enforce policy, transform, etc).
This patch makes ->new evaluate the reference type of the passed filters
and builds an array with a single item if a scalar has been passed. The
loop now explicitly casts the filters as an array.
To test:
- Apply the test patch
- Run
$ prove t/RecordProcessor.t
=> FAIL: tests fail because Koha::RecordProcessor doesn't hanlde
more than one filter at a time.
- Apply this patch
- Run
$ prove t/RecordProcessor.t
=> SUCCESS: tests now pass
- Easy, right? Sign off :-D
NOTE: Read code. Don't like the ? operator logic, but it is
functional despite readability issues.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 14646: (regression test) Koha::RecordProcessor only accepts one filter at a time
This patch introduces new tests to t/RecordProcessor.t so it tests for
creating processors with more than one filter. It does so by running
my $processor = new Koha::RecordProcessor({
filters => ['Null','Dummy']
});
and testing the results.
To test:
- Apply the patch
- Run:
$ prove t/RecordProcessor.t
=> FAIL: tests related to multiple filters fail.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Marcel de Rooy [Mon, 1 Jun 2015 13:21:32 +0000 (15:21 +0200)]
Bug 3333: Confusing item status for not-for-loans
This patch makes a tiny change in C4::Search::searchResults as to the
handling of not-for-loans. This should make the display of status and
availability of items more consistent in opac and staff.
Additionally, a Place hold link should disappear in the opac, when it is
not possible to place a hold on any item of one biblio.
The following spots need special attention; the display should be
corrected by this patch:
[A] Location column showing number of available items in catalogue/search.
[B] Location column of Cataloging Search (addbooks.pl)
[C] OPAC Search results list in non-XSLT view.
NOTE
The forms opac-MARCdetail and MARCdetail also include an Items table with
column Not for loan. The information in this column might still be somewhat
confusing but is actually correct. The column only contains Not for loan if
the item field is set. So it is empty when only the item type is nfl.
Since a correction here is arguable, I am not including it on this report.
Test plan:
[1] Have at least two item types. Mark one item type (X) as not for loan.
[2] Use at least two biblios with two items each. Mark one item of the first
biblio as not for loan at item level (via item editor).
Change one item of the second biblio to the item type of step 1 (X).
[3] Set pref item-level_itypes==item and set all four xslt prefs (for opac
and staff, results and detail) to default.
[4] Check spots A, B and C as mentioned above. Also check:
[D] OPAC Detail, Holdings table, Status column
[E] Staff Detail, Holdings, Status.
[5] Make all four xslt prefs now empty. Check spots A to E again.
Especially observe C here.
[6] Set pref item-level_itypes==biblio. Change your second biblio to item
type of step 1 (X) in the cataloguing editor (MARC 942c).
Check spots A to E again.
[7] Set all four xslt prefs again to default. Check spots A to E again.
[8] Run the unit test t/db_dependent/Search.t.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Martin Stenberg [Tue, 18 Aug 2015 14:41:42 +0000 (16:41 +0200)]
Bug 14675: Don't update details if no changes made
if no changes has been made for personal details, bring user back to details
page and inform them that no changes has been made.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Kyle M Hall [Mon, 6 Jul 2015 15:00:38 +0000 (11:00 -0400)]
Bug 14498: uri_escape error triggered by duplicate accountno's for patron
If a patron has duplicate accountno's for two different fines in Koha this will trigger the error
usi_escape: Unmatched [ in regex; marked by <-- HERE in m/([ <-- HERE ])/ at (eval 133) line 1.
upon attempt to pay. How those accountno's get duplicated is unknown, but considering accountno
is somewhat vestigial at this point in time, it would be much more sensible to use accountlines_id
which is has guaranteed uniqueness at the database level.
Test Plan:
1) Create a patron with 2 fines
2) Edit the accountno's for those fines and set them to 0
3) Attempt to pay one, note the error
4) Apply this patch
5) Refesh the page
6) Attempt to pay one, no error this time!
7) Test Pay, Write off, Pay amount, Write off all, and Pay selected
Signed-off-by: Deborah Duce <deborah.duce@huntsvillelibrary.ca> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The cataloguing plugin stocknumberam123.pl is broken and no
longer generating numbers - this patch fixes it.
To test:
- Link a subfield to the plugin - usually it's 952$i or the UNIMARC
equivalent in your MARC frameworks
- Create a new item, set the inventory number to: A 0000000002
- Start to catalog another item, enter A into inventory and
- Enter A as stocknumber and activate the plugin by clicking on
... at the end of the field
- The number will not get added - Firebug shows an error:
Undefined subroutine CGI::output_html_with_http_headers
- Apply patch
- Verify numbers are now generated and no errors are shown
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The cataloguing plugin stocknumberAV.pl is broken and no
longer generating numbers - this patch fixes it.
To test:
- Link a subfield to the plugin - usually it's 952$i or the UNIMARC
equivalent in your MARC frameworks
- Set up a new authorised value INVENTORY, the code is an uppercase
prefix - "B"
- The Descriptions is your starting number - 1
- The OPAC description remains empty
- Catalalog an item
- Enter B as stocknumber and activate the plugin by clicking on
... at the end of the field
- The number will not get added - Firebug shows an error:
Undefined subroutine CGI::output_html_with_http_headers
- Apply patch
- Verify numbers are now generated and no errors are shown
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Galen Charlton [Tue, 4 Aug 2015 15:59:39 +0000 (15:59 +0000)]
Bug 14644: unbreak SIP2 terminal login when using telnet transport
This patch fixes breakage introduced by the patch for bug 13506
that prevented SIP2 clients from authenticating themselves over
the telnet transport. Attempts to do so would manifest by the
SIPServer backend crashing and the connection getting closed.
To test:
[1] Use the stock SIPServer config, etc/SIPconfig.xml, and ensure
that the database contains a staff user whose username is 'term1'
and password is 'term1' that has the circulate permission.
[2] Start SIPServer, telnet to port 8023, and attempt to log in. The
connection will be aborted:
$ telnet localhost 8023
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
login: term1
password: term1
Connection closed by foreign host.
[3] Apply the patch and restart SIPSever, then repeat step 2. This time,
the login should succeed:
$ telnet localhost 8023
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
login: term1
password: term1
Login OK. Initiating SIP
Signed-off-by: Galen Charlton <gmc@esilibrary.com> Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 14574: Fixing error messages on staff client so they make more sense
To test:
1) Go to cgi-bin/koha/errors/errornumber.pl to see the error messages which currently don't make sense (ie cgi-bin/koha/errors/401.pl etc). Have only made changes to 401, 403 and 404
2) Apply patch
3) Go to cgi-bin/koha/errors/401.pl --> Check that it now says "This error means that you aren't authorized to view this page." and "Please log in and try again.". Check that 'log in' redirects to the log in page (mainpage.pl).
4) Go to cgi-bin/koha/errors/403.pl --> Check that it now says "This error means that you are forbidden to view this page."
5) Go to cgi-bin/koha/errors/404.pl --> This page should be very different. Check that the 'Error 404' is now in italics and not bold. Check that the page gives a list of reasons the user may have been given this error and some options for their next step.
Signed-off-by: Catherine <cnorthcott.work@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: replace tab with 4 spaces.
Note: I am not sure the em tag is useful here. Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
projects / koha.git / log