Marcel de Rooy [Wed, 15 May 2013 14:06:49 +0000 (16:06 +0200)]
Bug 10030: QA Followup for trivial false warning detected while testing
Moving the warn line below the line that returns if amount<=0.
If amount<=0, a false warn is now raised because of the return after it.
We should only warn here if we do not return.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with fines.pl on overdue.
Before this patch:
Reducing fine for item 199709 borrower 23 from 44 to -1 - MaxFine reached.
This did not happen however because of the return.
After this change: no false warning. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Kyle M Hall [Thu, 11 Apr 2013 19:46:50 +0000 (15:46 -0400)]
Bug 10030 - MaxFines checks against amount, not amount outstanding
If a patron has over time accumulated fines greater than the amount
defined in MaxFine, the patron will never get more fines even if they
have previously paid off those fines.
This bug was introduced by the patch for Bug 7420.
Test Plan:
1) Create a patron
2) Create a fine of 10.00 for that patron
3) Pay off the fine
4) Set MaxFines to 5.00
5) Check out an item to the patron, backdate the due date
so the item should generate fines.
6) Run fines.pl, observe that no fine was created
7) Apply the patch
8) Rerun fines.pl
9) Observe that the fine was created correctly
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Bug 10094 - koha-list should have a --disabled option switch
This patch adds that (--disabled) option switch, Also revisits some of the code and docs.
To test:
- Apply the patch and create new packages (you might just drop the koha-list command somewhere)
- Create several instances (koha-create)
- Randomly set some as disabled, others enabled and enable email on some.
- Test all possible option switches combinations
Expected results:
- koha-list should abort with a proper message if mutually exclusive options selected (--email vs. --noemail, --enabled vs. --disabled)
- koha-list should show the exact instances you asked for
Regards
To+
P.S.: I wanted to add the --disabled option switch for the tab-completion work I'm doing, but as of bug 4876 I thought it would be ok to revisit the script to make it robust and clear.
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Does what it says, and cleans up the script at the same time. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-stop-zebra now
- Checks the instance exists.
- Checks the instance is enabled.
- Checks if the zebra daemon is already running.
Regards
To+
Edit: Corrected the die message
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-email-enable now
- Checks the instance exists.
- Checks if email is already enabled.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch makes koha-rebuild-zebra:
- Check for the existence of the instance
- Handle arbitrary amount of instance parameters
- Capture -a and -b (which made the script rebuild twice the chosen DB). It adds the extended version (--authorities and --biblios respectively) of the option switch. This makes the -a and -b switches work as "only do authorities" (or viceversa). They can be used concurrently, which is the default behaviour when no switch is provided.
- Handle -v (and --verbose) as koha-rebuild-zebra options, to ease the use for non-techie users.
- The rebuild_zebra.pl is wrapped inside an IF to return error values if we ever make rebuild_zebra.pl return error codes (this is pointed in the code).
- Added -h/--help switches and an 'usage' output :-D Please provide patches for any wording issues, or contact me to fix it.
To test:
- Apply the patch and create your packages (or just use the script from your branch)
- Run it in this scenarios / options
- -h/--help to see the available option switches
- Mix them with one or more instances, of which some could be fake
- try -a/--authorities and -b/--biblios in all possible combinations
- try -v/--verbose works
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Tue, 14 May 2013 19:09:14 +0000 (15:09 -0400)]
Bug 6329 - patron categories should show which fields are required
When entering a new patron category, required fields are not indicated
on the entry form. This patch adds the "required" class to the relevant
labels.
To test, add or edit a patron category. Confirm that the required fields
(category code, category type, description, and enrollment period) are
indicated as being required with a red label.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely.
Template changes only, but no string changes. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Frédéric Demians [Tue, 14 May 2013 11:01:56 +0000 (13:01 +0200)]
Bug 10214 Add header to syspref po files
With this patch, header is created when creating a new syspref .po file
for a new language (translate create), and is added if it doesn't
already exist when updating an existing language (translate update).
To test:
(1) Create a new language syspref file:
./translate create -p xx-XX
Check that there is an header
(2) Update an existing syspref file without header:
./translate update fr-FR
Check that fr-FR-pref.po has a header
(3) Update an existing syspref file with header:
Modify fr-FR-pref.po. Add an email, or whatever.
./translate update fr-FR
Check that fr-FR-pref.po has a header with the manual modification
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Also tested that updated pref files can still be installed correctly. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Fri, 10 May 2013 18:44:10 +0000 (14:44 -0400)]
Bug 10108 - can't print more than one page of overdues
Printing a report like overdues in Firefox results in a printout which
cuts off in the middle. I traced the cause to something in the YUI grid
system, although I'm not sure what specific definition is the cause.
This patch adds a "screen" parameter to the @import which loads the YUI
grid CSS file. This will disable YUI grid layouts in print views. The
main disadvantage to this, as far as I can tell, is that it will
"linearize" some layouts. For instance: the patron detail page
(moremember.pl) which on screen is divided into two columns. I think
this disadvantage is outweighed by the ability to make complete prints.
To test, apply the patch and clear your cache. Try printing various
reports from Firefox. Printouts should look correct and be complete.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
all tests pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
CSS only change, no strings involved.
Tested with a saved SQL report 'select * from borrowers'. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Kyle M Hall [Tue, 12 Mar 2013 18:30:48 +0000 (14:30 -0400)]
Bug 9575 - Serious Holds Problem with IndependantBranches
If IndependantBranches is enabled, all holds for an item display the
currently logged in library no matter what, and modifying the holds will
set all pickup locations for all the holds to that logged in library!
Test plan:
1) Disable IndependantBranches
2) Place 3 holds on a record with 3 different pickup locations
3) Enable IndependantBranches
4) Refresh the holds page for that record, all the holds show now
show a pickup location of the logged in branch
5) Modify the order of the holds
6) Disable IndependantBranches
7) Refresh the holds, verify the holds all now have a pickup
location of the logged in branch
8) Apply the patch
9) Repeat steps 1-3
10) Refresh the holds page for that record, all the holds should
now show the correct pickup branch, but it cannot be changed
as IndependantBranches is enabled.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
In my tests the above test plan only worked out if my user
had no superlibrarian permission. But then behaviour for
independentbranches off/on was all correct.
All tests and QA script pass. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The toolbar on the cataloging home page lacks the standard toolbar id,
resulting in an inconsistent appearance. This patch adds the correct id.
To test, apply the patch, clear your browser cache, and view the
cataloging home page (cataloguing/addbooks.pl). The toolbar should look
like other toolbars in Koha (for instance, members/members-home.pl).
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template change only, no string changed involved.
Works as described. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Fri, 10 May 2013 20:00:51 +0000 (16:00 -0400)]
Bug 10196 - items table partially hidden in marc view in ccsr
In the CCSR theme's OPAC MARC view the table of items is truncated
because the container div is styled with "overflow:hidden." I think the
complete display of information is more important than not seeing a
horizontal scrollbar, so this patch removes the style.
To test, apply the patch and clear your browser cache. View a MARC
detail page for a title which has holdings and confirm that the entire
table can be seen. Test other pages to make sure no unwanted layout
changes have resulted.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
all tests pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Simple CSS change, no string changes. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Bug 8840 - [SIGNED-OFF] ubuntu-pkg-check.sh fix and extend functionality
First, reworked it into a newer script with parameters:
ubuntu-packages.sh -r
This will generate output identical to the old script, except
that it is fixed for non-english setups.
ubuntu-packages.sh -h
This adds a brief help, which all scripts should have.
ubuntu-packages.sh -ic
This helps handle a multi-arch problem by printing out a
relevant command for installing missing dependencies.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com> Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as advertised, see Bugzilla for details. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Kyle M Hall [Fri, 19 Apr 2013 14:21:43 +0000 (10:21 -0400)]
Bug 10079 - HomeOrHoldingBranch should not control who can delete when IndependantBranches is enabled
Test Plan:
1) Enable IndependantBranches
2) Set HomeOrHoldingBranch to holding branch
3) Delete an item whose holding branch is your logged in branch, and
whose home branch is not
4) Apply this patch
5) Repeat step 3, it should fail
6) Try to delete another items whose home branch is your logged in
branch, and whose holding branch is a different branch. This
deletetion should succeed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Change is logical, only homebranch should determine if the item
can be deleted. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds a "newsfooter" class to allow CSS modification
of the date appearing as a footer on each news.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds a class, checked po files to make sure change is string safe. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Bug 7593 : QA followup : restores deleted line in C4::Acquisition
This patch restores the line exporting GetOrderNumber that I accidentally suppressed.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Restores a line that was deleted by the first patch.
Was not sure if patches should be squashed. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Mathieu Saby [Wed, 13 Mar 2013 15:12:03 +0000 (16:12 +0100)]
Bug 7593: Move orders on the destination record when merging 2 records
Revised patch according to QA comments. No more dependent from bz 9780.
At present, merging records breaks the link order/record, except
if an item of the deleted record is used in the order.
This is a serious issue for libraries creating items on receipt.
This patch moves existing orders from deleted record to destination record.
It creates a new function Acquisitions::GetOrdersByBiblionumber,
that could be used by other patches later.
To test :
Check the problem :
1. Set syspref AcqCreateItem = Create an item when receiving an order
1. Create a basket with one order
2. Put the record used by this order in a list
3. Put an other record in the list
4. Merge the 2 records, keeping as a reference the record NOT used in the order
5. In the order, you will see for that order "Deleted bibliographic information..."
6. Apply the patch
7. Repeat steps 1-4
8. In the order, you will see the title/author of the kept record.
9. Set syspref AcqCreateItem = Create an item when placing an order
10. Repeat steps 1-4 (an item will be created)
11. In the oreder, you will see the title/author of the kept record
(it is already the case at present. the patch should not alter this behavior)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan, test suite and QA script pass. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Fri, 10 May 2013 16:12:11 +0000 (12:12 -0400)]
Bug 9680 - cart aligned right in CCSR
The CCSR theme sets a min-width of 1000px for windows which are more
than 700px wide. This caused the cart popup window to be given a
min-width of 1000px, resulting in a broken layout with unnecessary
horizontal scrolling.
This patch adds a class to the cart template and to other pop-up window
templates to ensure that a large min-width is not enforced and to give
consistent padding to those pages.
To test, set your theme to 'CCSR' and view the following pop-up pages:
- The Cart. From the cart, trigger:
- The "send" window
- The "download" window
- From a view of a List's contents trigger:
- The "send" window"
- The "download" window
Each of these pages should look correct with no horizontal scrolling.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template and CSS changes only, but no string changes.
Save for inclusion in 3.12.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Kyle M Hall [Mon, 15 Apr 2013 13:09:05 +0000 (09:09 -0400)]
Bug 10054 - When SingleBranchMode is enabled, allow superlibrarians to set logged in library
Currently, when SingleBranchMode is enabled, nobody can change the
logged in library in Koha. To change it requires disable
SingleBranchMode, switching the library, and re-enabling it. It seems
reasonable to allow superlibrarians to switch the logged in library even
if SingleBranchMode is enabled.
Test Plan:
1) Apply this patch
3) Enable SingleBranchMode
4) Log in as a superlibrarian
5) Attempt to change the logged in branch
This change should succeed
6) Log in as a non-superlibrarian account
7) Attempt to change the logged n branch
This should not be allowed, as per Koha's current behavior
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I guess this doesn't do any harm even though the practical motivations
behind it, as described in the bug, seem otherwise solvable. If
SingleBranchMode is supposed to prevent librarians from switching their
logged in library why can they choose their library when they first log
in? Was SingleBranchMode supposed to only affect the OPAC originally? Or
should the login form be modified? This seems to be a band-aid on a
poorly-implemented feature.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch works as decribed. As this only adds a check for a superlibrarian
it seems safe and should not interfere with normal staff accounts. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Thu, 9 May 2013 19:08:41 +0000 (15:08 -0400)]
Bug 10225 - If an item isn't editable, don't show the onclick Edit/Delete menu
The user should not be shown edit/delete links when clicking on a row in
additems which they cannot edit because of the IndependantBranches
setting. This patch adds a class to the row to exclude such rows in the
JavaScript onclick handler.
To test:
- Turn IndependantBranches on and edit items for a title which
has holdings from various branches including your own.
- Click a row for an item which is held by your library. You should see
the "Edit/Delete" links appear.
- Click a row for an item which is held by another library. No links
should appear.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All test pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Changes to the templates include no string changes. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Magnus Enger [Wed, 8 May 2013 09:10:27 +0000 (11:10 +0200)]
Bug 10134 - set XSLT usage ON as default, for new Koha installs
Currently, new installs are created with XSLT display set to "off",
but XSLT seems to be the preferred way to display records, so
having the default be "on" instead seems to make sense. This patch
will of course only affect new installs.
To test:
- Apply the patch
- Run through the webinstaller on an empty database
- Log in to the staff client and search for "xslt" in system
preferences
- Verify that XSLTDetailsDisplay, XSLTResultsDisplay,
OPACXSLTDetailsDisplay and OPACXSLTResultsDisplay are all set to
"default"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passes test plan correctly.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes syspref.sql for new installations to use XSLT views
by default. No changes to existing installations, no
string changes.
Passes all tests. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Fri, 10 May 2013 13:50:51 +0000 (09:50 -0400)]
Bug 9679 - can't place hold from cart in CCSR
When the CCSR theme is enabled, selecting items in the cart and clicking
"place hold" triggers a JavaScript error and fails. This patch adds a
function missing from the CCSR version of basket.js.
To test, apply the patch and clear your browser cache.
- Enable the CCSR theme and put items into the OPAC cart.
- Open the cart, select one or more items, and click "place hold."
The cart should automatically close and the main window should redirect
to the holds screen showing your selections.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All test passed
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed patch fixes the problem described.
All tests and QA script pass, JavaScript only change.
No strings involved, save for inclusion in 3.12. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Tue, 7 May 2013 16:11:23 +0000 (12:11 -0400)]
Bug 10201 [Follow-up] Old OPAC patron update system should be removed
The previous patch missed removal of one template, kohaerror.tt, which
was used only by opac-userupdate.pl. This patch removes it.
To test, apply the patch and search Koha source files for references to
kohaerror. There should be none.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass. Updating the German po files
with this patch applied no new strings appeared. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Mon, 6 May 2013 14:56:03 +0000 (10:56 -0400)]
Bug 10201 - Old OPAC patron update system should be removed
The old pages for viewing and updating patron details in the OPAC have
been superceded by the new script opac-memberentry.pl. This patch
removes he old scripts and templates and corrects links to them.
This patch also removes reference to opac-userupdate.tt from
opac-patron-image.pl and replaces the authentication process with one
which uses check_cookie_auth, based on the example of opac-tags.pl.
To test, edit a patron record and set the "Gone no address" flag. Log in
to the OPAC with that account and view the patron details page. The
warning about out of date contact information should link to the new
update page.
Next, attempt to place a hold. You should see the same warning, and it
should also link to the new update page.
Test the display of patron images: Log in as a user who has an image
associated with their account and navigate to
/cgi-bin/koha/opac-patron-image.pl. Their patron image should display.
A search of Koha source files should return no results for the missing
scripts or templates.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Magnus Enger [Wed, 8 May 2013 10:03:48 +0000 (12:03 +0200)]
Bug 10217 - Make sure direct links to detail views work when there is no session
To reproduce:
- Make sure you do not have a session for the OPAC you will be testing
with. Delete the CGISESSID session cookie if you have one.
- Go directly to a detail view, e.g.:
/cgi-bin/koha/opac-detail.pl?biblionumber=1
- Observe the error "Can't use an undefined value as a HASH
reference at /home/magnus/scripts/kohadev/opac/opac-detail.pl line 445."
To test:
- Apply the patch
- Reload the page with the error
- You should now see the detail view of the record, as usual
Thanks to Chris Cormack who suggested the fix for this!
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan, confirmed patch fixes the problem.
All tests and QA script pass. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Paul Poulain [Mon, 6 May 2013 13:06:47 +0000 (15:06 +0200)]
Bug 9681: Add some indexes in database
Some table columns should have an index to speed SQL queries :
- statistics table has only one index (used to make heavy queries for reports)
- itemtype should have an index in items and biblioitems (this is used in circulation to check the number of existing issues of a specific item type)
- issue.branchcode and issue.issuingbranch
Test plan :
- Create a new database using kohastructure.pl
=> check there is no SQL error and that new indexes are present (mysql> show create table)
Apply update database on a master version
=> check there is no SQL error and that new indexes are present (mysql> show create table)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Indexes created as described. No errors.
Fixing small merge conflict.
Test presence of new indexes on all affected tables.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Julian Maurice [Mon, 6 May 2013 06:43:50 +0000 (06:43 +0000)]
Bug 10185: Add missing columns in update 3.09.00.025
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
SQL only changes fixing an important database update.
IMPORTANT: Patches must be backported to all versions containing
the database update 3.09.00.025.
I used the test plan provided by Julian with some additions:
1/ Do a fresh 3.8 install
2/ Do some reserves
3/ Check your old_reserves table is empty
4/ Update your sources to 3.10
5/ Run updatedatabase.pl
6/ Your reserves table is now empty!
I made sure I had item level and title level holds, also
suspended holds.
I repeated the test with entries in my old_reserves table
(cancelled and filled holds) to make sure this is also still
working correctly.
Before the patch we lost all suspended holds and when the
old_reserves table was empty also all holds in general.
After the patch the reserve_id is added but the other data
in both tables is not altered.
NOTE: Adding the reserve_id first to old_reserves and then
to reserves we are missing one id in between.
old_reserves: 1,2,3
reserves: 5,6 Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Julian Maurice [Fri, 3 May 2013 15:20:17 +0000 (17:20 +0200)]
Bug 10185: Fix update 3.09.00.025
It can remove all reserves from reserves table when there is no entries
in old_reserves.
This is due to @ai which is set to NULL in
SET @ai = ( SELECT MAX( reserve_id ) FROM tmp_reserves )
and reserve_id > NULL returns no results in
INSERT INTO reserves SELECT * FROM tmp_reserves WHERE reserve_id > @ai
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan and comments on second patch. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
David Cook [Wed, 8 May 2013 08:00:29 +0000 (18:00 +1000)]
Bug 10156 - Fix usr/bin/perl path for get_report_social_data.pl
Currently, the perl path for get_report_social_data.pl is "#!/bin/perl"
when it should be "#!/usr/bin/perl".
While I'm not entirely sure how to test this, rangi did mention:
23:47 (it wouldnt work on my debian install)
23:48 zsh: no such file or directory: /bin/perl
It's a pretty trivial change, so I'm not sure it needs much of a test
plan.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Before the patch "grep -r '#!/bin/perl' in the misc dir shows one file
with this line, and it is indeed get_report_social_data.pl. After the
patch there are no occurrences left. Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jonathan Druart [Mon, 22 Apr 2013 14:19:01 +0000 (16:19 +0200)]
Bug 8278: build the structure with to_json instead of manually.
Test plan:
Same as previously.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Fri, 8 Mar 2013 17:56:24 +0000 (12:56 -0500)]
Bug 8278 - Replace YUI autocomplete in UNIMARC 210c plugin
This plugin, for pseudo-authority-control of publisher information,
used YUI autocomplete to pull existing publisher data from the
biblioitems table. Despite its name it is not UNIMARC-specific.
It assumes publisher name data is saved in biblioitems.
This patch converts the autocomplete to jQueryUI. The search
script has been amended to return valid JSON. The template has
been modified to enable the jQueryUI autocomplete and to add
structure more consistent with other popups.
To test, link the publisher name field in your MARC structure to
the unimarc_field_210c_bis.pl plugin. Open a MARC record for
editing and click the "tag editor" link to launch the plugin.
Type the first few letters of a publisher which exists in your
database. You should get an autocomplete menu of publishers
which match your search. Select one and click the "choose"
button to fill the field in the MARC editor.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: work as described. No errors.
Test: link 260b to plugin. Edit record and search first letters
of present editors. Menú appears and can select and fill value.
Why plugin 210c_bis talk about field 225a?
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Plugin now works correctly for me, even when linked
to 260$b in a MARC21 installation. All tests and QA script
pass. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Mon, 6 May 2013 16:29:01 +0000 (12:29 -0400)]
Bug 10204 - Patron image no longer appears in the OPAC
With the addition of opac-memberentry.pl to the OPAC we lost a way to
display the image associated with a patron's account. This patch adds
display of the patron image to opac-memberentry.pl now that
opac-userdetails.pl and opac-userupdate.pl are deprecated.
To test:
1. Log into the OPAC as a patron who has an image associated with their
account. View the "my personal details" tab and confirm that the
patron image appears with and without OPACPatronDetails enabled.
2. Log into the OPAC as a patron who has no image associated with their
account. View the "my personal details" tab and confirm that the
layout looks correct.
3. Turn off OPACpatronimages and confirm that the "my personal details"
page looks correct.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with OpacPatronDetails and OpacPatronImags turned on/off
and it's working well.
Template only changes. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The original implementation of QueryParser did not handle truncation
based on the QueryAutoTruncate system preference. This patch adds support.
To test:
1) Apply patch.
2) Turn on UseQueryParser.
3) Set QueryAutoTruncate to "automatically."
4) Search for "har". Note that it returns results with words
like "Harry" (i.e. with right truncation).
5) Search for "har*". Note that it still returns results with right
truncation.
6) Set QueryAutoTruncate to "only when * is added."
7) Search for "har". Note that it returns only records that have the
exact word "har" in them (most likely there will be none unless you
have Hebrew items).
8) Search for "har*". Note that once again it returns results for "Harry"
(i.e. right truncated results).
9) Sign off.
This patch also reindents a hash in Koha/QueryParser/Driver/PQF.pm
because it was hard to read before.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Thx for fixing this Jared! Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Making sure that the regex does not kill more than it should.
Amended: does now only look at separating colons(;) not commas(,).
Amended: two index expressions in direct context replaced by same regex for
consistency.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Lyon3 Team [Mon, 8 Apr 2013 09:14:09 +0000 (11:14 +0200)]
Bug 8896: Delete serials no more missing from missinglist
When manual history is disabled in subscription history section
if a serial has been previously set as missing and is received
or set as expected, late or claimed, it will be deleted from missinglist
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Regex needs a followup. More comments on Bugzilla.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The $anyholdable variable was set to 0 or 1. However, as it is set in
a loop, and future changes to the opac-reserve.pl script may require
knowing how many items the patron is going to place a hold on, it makes
more sense to treat $anyholdable as a counter. This follow up turns it
into one.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Owen Leonard [Wed, 1 May 2013 18:22:50 +0000 (14:22 -0400)]
Bug 10166 - Can't place holds on multiple titles if one or more are un-holdable
opac-reserve.pl tries to check whether all selected titles in a
multiple-hold batch are unavailable to be placed on hold. However, the
logic is flawed in such a way that if the last item in the batch cannot
be placed on hold the script assumes none can be placed on hold.
This patch modifies the way the script tracks the "no titles available
for holds" variable in order to correct the error.
To test, place multiple holds by selecting titles from a list of search
results. Test three conditions:
- All titles are available to be placed on hold
You should see no onscreen warnings, and all titles should be
selectable on the place hold screen. A "Place hold" button should
appear at the bottom.
- Some titles can be placed on hold, some cannot
The titles which can be placed on hold should be selectable.
Titles which cannot be placed on hold should show a warning
message. A "Place hold" button should appear at the bottom.
- No titles can be placed on hold
"Sorry, none of these items can be placed on hold." should appear at
the top of the page. All titles should appear with warning messages.
There should be no "Place hold" button.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jonathan Druart [Fri, 3 May 2013 12:37:46 +0000 (14:37 +0200)]
Bug 10183: Remove single pixel on the serials collection page
Test plan:
Go on the serials collection page
Check that the single pixels before and after the table have
disappeared.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Pixels are removed, table functions work as before. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Karam Qubsi [Sat, 4 May 2013 20:44:57 +0000 (23:44 +0300)]
Bug 10176: Solve the Invalid URLs in 'Refine Search Results' when it uses UNICODE symbols
I just add use utf8; to the Search.pm and the problem
was solved .
Test plan :
1- Add bib records with non-latin characters
2- search for some of these records
3- try to refine your search using Subject / Author
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work fixing URLs in facets. Now they work correctly.
No errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
I tested facets with the 22 Arabic records provided on
bug 9579 successfully. Before the patch the links are not
correct, after applying the patch the links work as
expected. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Bug 10084 - YUI path wrong in CCSR theme with packages
Bug 9052 fixed this for prog, CCSR was left aline in the dark (it's friday).
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Worked fine in my test package, good work Tomas Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
koha-email-disable now
- Checks the instance exists.
- Checks if email is already disabled.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Jonathan Druart [Fri, 26 Apr 2013 11:59:18 +0000 (13:59 +0200)]
Bug 10044: Remove duplicate pagination on the pending orders page.
Test plan:
Check that there is just one pagination on the pending orders page.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works and deletes the old pagination that was replaced by
datatables. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Magnus Enger [Tue, 5 Mar 2013 12:49:11 +0000 (13:49 +0100)]
Bug 9250 - Followup to add koha-*-sip commands to koha-common.xml
The original patch for Bug 9250 did not add the new commands to
debian/docs/koha-common.xml, which functions as a sort of table
of contents for the real commands. This patch adds them.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Simple documentation patch Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Robin Sheat [Mon, 10 Dec 2012 05:57:04 +0000 (18:57 +1300)]
Bug 9250 - [SIGNED-OFF] provide commands to manage the SIP server
This adds commands required to control the SIP server. These commands
are:
* koha-enable-sip - copies the SIP config to the sites directory
* koha-start-sip - starts the SIP server processes
* koha-stop-sip - stops the SIP server processes
It also calls these as appropriate from the koha-common init script.
To use:
1) sudo koha-enable-sip instancename
2) sudo vim /etc/koha/sites/instancename/SIPconfig.xml
Do whatever is needed for your site's SIP configuration
3) sudo koha-start-sip instancename
To test:
1) Build packages with this patch
2) Ensure that sudo koha-start-sip instancename doesn't do anything
3) Run sudo koha-enable-sip instancename
4) Edit /etc/koha/sites/instancename/SIPconfig.xml if needed (probably
not required for testing)
5) Run sudo koha-start-sip instancename
6) Note that the sip processes are now running
7) Run sudo koha-stop-sip instancename
8) Note that the sip processes have gone
9) Reboot your Koha server
10) Note that the sip processes are back
Sponsored-By: Waitaki District Council Libraries Sponsored-By: South Taranaki District Council Libraries Sponsored-By: Horowhenua District Council Libraries Sponsored-By: Rangitikei District Council Libraries Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as advertised. koha-start-sip without a prior koha-enable-sip
does nothing. koha-enable-sip copies the SIP config file to the
instance directory. After koha-enable-sip, koha-start-sip and
koha-stop-sip works as expected. After a reboot, the SIP processes are
still running. I have not actually tested the SIP servers after they
have been started, but assume they work the same as always.
The man pages look good.
The new commands should also have been added to the man page for
koha-common. I'll do a followup for that. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Bug 10041 - Provide a koha-translate script to aid package users on installing translations
Until we have solved the packaging of koha template translations, provide a command that manages the installed translations in a proper way.
To test, build a Debian package of current master+the patches from this bug :-D and try the many options running koha-translate --help provide.
The command itself can be grabbed from a git checkout with this patch applied to test the script's funcionality. If it (and its docs) fits the package building stuff, I'll test on monday when I can be back on my workstation.
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Good adition. Work as described. No errors.
Copied to /usr/local/bin. No errors on install, update, remove, list and check. Passed-QA-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- checks for the existence of the instance before any other action on it.
- checks if the instance is already enabled before changing stuff in the config files.
- only reloads apache if it is needed!
- handles more than one instance name as parameter (the code was there, a check for the cardinality of the args prevented it from working).
- documents this behaviour change in the docs
- doesn't break if the provided (invalid) instance name is a prefix/suffix of a real one (added -x to the relevant grep command).
To test:
- Aplpy the patch, build your packages
- Run koha-enable on
- Non existent instance (try using a prefix or a suffix of an already created one too).
- Already enabled existent instance name.
- Disabled instance.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
As noted by Mason on bug 10101, the check was not working for zero arguments.
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- checks for the existence of the instance before any actions on it.
- checks if the instance is already disabled before touching anything (warns otherwise)
- only reloads apache if needed
- handles more than one instance name.
- changed the docs to acknowledge the previous item.
To test:
- Apply the patch, build your package
- Run koha-disable on
- Non existent instance (try names that are prefix and suffix of a valid one too please)
- Already disabled instance name.
- Enabled instance name.
It should work as expected and warn the user on the expected wrong cases.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-start-zebra now
- Checks the instance exists.
- Checks the instance is enabled.
- Checks if the zebra daemon is already running.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-restart-zebra now
- Checks the instance exists.
- Checks the instance is enabled.
- Checks if the zebra daemon is already running.
Regards
To+
Edit:
- changed some wording problems.
- fixed an error in parameter validation
Sponsored-by: Universidad Nacional de Córdoba Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Mason James <mtj@kohaaloha.com>
http://bugs.koha-community.org/show_bug.cgi?id=6509 Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Bug 6506: When AnonymousPatron not set, deletion of issue history silently failed.
Remedied by:
- in Circulation.pm changing AnonymiseIssueHistory so that it returns ($rows, $err_history_not_deleted) instead of $rows
- consequential change to misc/cronjobs/batch_anonymise.pl to handle updated return value, and fail if there is an error
- consequential change to tools/cleanborrowers.pl although this still fails silently (raised as bug 9944)
- update of opac-privacy.pl to check return value and pass on error
- update of opac-privacy.tt to display error if appropriate
Note bug 9942 remains unfixed, which is a similar issue upon issue return.
To test:
1. OPAC
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- attempt to delete user history
- observe error
- check history - still there
- change anonymous patron to a valid user
- attempt to delete user history
- observe success message
- check history - gone
2. cleanborrowers.pl
- test it functions as before. bug 9944 has been raised for it continuing to silently fail.
3. batch_anonymise.pl
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- run script (I use --days -1 for testing)
- script should fail with a Carp message
- change anonymous patron to a valid user
- run script as before
- script returns quietly
- check history - gone
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Jonathan Druart [Tue, 9 Apr 2013 10:08:56 +0000 (12:08 +0200)]
Bug 6506: Followup add warning in the system information tab.
Add a warning in the system information tab of the about page.
Test plan:
Set OPACPrivacy = 1 and AnonymousPatron = 0 and go on the about page,
tab 'system information'. Check that the warning appears.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Mason James <mtj@kohaaloha.com>
http://bugs.koha-community.org/show_bug.cgi?id=6509 Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
We have a message if we want to add items and we can't add, substract only.
It's ok if we choose to create items on ordering, in this case koha can't add items, just substract
and in this case we have to delete manually the items(s) in the catalog.
But if via the syspref AcqCreateItem we choose to create items when receiving this limitation is not usefull
The patch just checks if the syspref AcqCreateItem is on 'ordering'
if not the message is not shown and we can add items
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Here is the test I made for signing off :
after applying the patch
- syspref AcqCreateItem : create items on RECEIVING
- in a basket, create an order (quantity = 1)
- save the order
- reopen the order
- change the quantity (2 instead of 1)
- save the order
=> changing quantity was not possible before the patch
- syspref AcqCreateItem : create items on CATALOGING
- in a basket, create an order (quantity = 1)
- save the order
- reopen the order
- change the quantity (2 instead of 1)
- save the order
=> changing quantity was not possible before the patch
- syspref AcqCreateItem : create items on ORDERING
- in a basket, create an order (click on "add" to add an item => quantity = 1)
- save the order
- reopen the order
- try to change the quantity (2 instead of 1), without clicking on "add" to create a new item => you cannot (alert message)
=> the behavior is the same as before the patch
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Copied test plan from bug report.
Template only change deactivating the Javascript that blocks
you from changing the quantity when AcqCreateItem is set to
something else than 'ordering'.
Passes all tests and QA script. Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
projects / koha.git / log