Lee Jamison [Thu, 22 Jun 2017 16:42:15 +0000 (16:42 +0000)]
Bug 18848: borrowers.lastseen comment typo
Typo in comment for the lastseen column in the borrowers table.
To test:
1. Verify lastseen column displays "last time a patron has been seed"
2. Apply patch
3. Verify lastseen column changed to "last time a patron has been seen"
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 14572 - insert_single_holiday() forces a value on an AUTO_INCREMENT column, during an INSERT
Removing all the id from the columns on the inserts and removing the
parameter '' of the values for the id.
Test plan:
1) Go to tools -> calendar
2) Add a Holiday only on this day.
3) Add a Holiday repeated every same day of the week.
4) Add a Holiday repeated yearly on the same date.
5) Add a Holidays on a range.
6) Add a Holidays repeated yearly on a range.
7) You should have the five calendars displayed.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Colin Campbell [Thu, 8 Jun 2017 11:59:55 +0000 (12:59 +0100)]
Bug 18755: Allow empty passwords in Patron Info to return OK
With this patch a parameter 'allow_empty_passwords="1" can be added to a
login in the SIP configuration file to allow the behaviour as was normal
before the patch for bug 16610 was applied. Some sip clients rely on
this behaviour sending an empty password field when they wish to
validate to user but do not have the password.
If a password is supplied it will be validated
A test has been added to Message.t to confirm this behaviour
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The commands in the test plan are examples, and may need varying
depending on your installation. This was created as a result
of attempting to clean the installation process up. However,
I believe the redefine might exist normally too. I just didn't
check. This is tested on a Debian 8 box sudo apt-get update'd
fully.
TEST PLAN
---------
empty error log
$ echo > ~/koha-dev/var/log/koha-error_log
drop and recreate and empty db
> drop database koha_library;
> create database koha_library;
> quit
run the web installer, but DO NOT LOG IN!
*opening chrome to Staff Client URL*
check the error log
$ less ~/koha-dev/var/log/koha-error_log
...
[Fri Jun 09 13:08:52.793627 2017] [cgi:error] [pid 5802] [client 192.168.71.101:58169] AH01215: [Fri Jun 9 13:08:52 2017] CGI.pm: Subroutine multi_param redefined at /usr/share/perl5/CGI.pm line 419.
...
recheck the error log
$ less ~/koha-dev/var/log/koha-error_log
notice no reference to "Subroutine multi_param redefined"
run koha qa test tools
Notice that it is just a require CGI; and comment added.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Wed, 14 Jun 2017 13:37:55 +0000 (15:37 +0200)]
Bug 18634: Handle colliding translation for preference sections
Problem on this report was caused by translating the tabs Privacy
and Payments by the same string. This caused overwriting a hash entry.
This patch tests if the key already exists and if so, it merges the
entries instead of overwriting the old contents.
Test plan:
[1] Make sure that e.g. Privacy and Payments translate to e.g Vie privee.
[2] Run translate install fr-CA (or the language you altered)
[3] Without this patch you should loose preferences from either Privacy or
Payments. With this patch, they should be merged.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with fr-CA.
Signed-off-by: Blou <philippe.blouin@inlibro.com>
Reset the .po files, reproduced the problem. Applied the patch and suddenly 'paypal' appeared.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Wed, 14 Jun 2017 13:19:10 +0000 (09:19 -0400)]
Bug 18801 - Merging authorities has an invalid 'Default' type in the merge framework selector
To test:
1 - Find two authorities and start a merge
2 - Leave the dropdown at 'Default'
3 - Merge records and note you get an error and can no longer view the
new record
4 - Check DB value of record authtypecode = 'Default'
5 - Apply patch
6 - Find two other authorities
7 - Merge leaving selector at default
8 - Success
9 - Check DB value of record authtypecode = ''
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Fri, 16 Jun 2017 14:01:12 +0000 (10:01 -0400)]
Bug 18434 - Followup - same changes for sort and facet fields
To test:
1 - Index some stuff with multiple fields defined for sorting
i.e. Authorites - make heading sortable - default is 110a and 111a for
heading - a record with 111a empty will make the sort field empty
2 - view the record:
curl http://localhost:9200/koha_kohadev_authorities/data/30?pretty=true
3 - Note the blank field
4 - Apply patch
5 - Reindex
6 - Fields should be correctly populated
Unit tests to follow (once I have the originals working for all)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Nick Clemens [Fri, 14 Apr 2017 14:03:11 +0000 (10:03 -0400)]
Bug 18434: Elasticsearch indexing broken with newer catmandu version
To test:
1 - Make sure you have latest koha deps, catmandu versions should be:
libcatmandu-marc-perl 1.09-1~kohadev1
libcatmandu-perl 1.0304-2~kohadev1
2 - Reindex elastic
3 - Try searching and likely notice odd results
4 - Try:
curl -XGET
'http://localhost:9200/koha_kohadev_biblios/data/792?pretty=true'
with a known biblionumber and notice some null fields
5 - Apply patch
6 - Reindex
7 - Note fields are populated and search works as expected
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch tries to introduce exhaustive tests for this class method.
I didn't try to provide a regression test for the current bug per-se, but
cover the current method behaviour as much as I could.
(kidclamp) I added a quick test of _convert_marc_to_json to use the mocking here
and illuminate what the change does, before the patches this should
fail (fields are indexed in place of one another), after it should succeed (new indexed fields are appended).
A minor bug is highlighted by this new tests, I'll provide a followup for it.
To test:
- Run:
$ sudo koha-shell kohadev
k$ de kohaclone
k$ prove t/db_dependent/Koha_Elasticsearch.t
=> FAIL: The returned fixer rules are not the expected ones
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fridolin Somers [Wed, 14 Jun 2017 10:33:25 +0000 (12:33 +0200)]
Bug 18756 - add Unit Test
Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 18756: Users can view aq.baskets even if they are not allowed
Due to bad use of grep syntax if there is one or more Basket Users the result of grep is not equal to 0 and the borrower is allowed.
Test plan :
1- select system preference 'AcqViewBaskets' on 'user'
2- create 2 borrowers (A, B) with only permissions on acquisition :
group_manage
order_manage
order_receive
staff
3- login with A and create a basket
4- add a basquet manager other than B
5- relog with account B
6- you can see the basket
Apply the patch.
The basket is no longer visible.
1- relog with A
2- add basquet manager B
3- relog with B
5- you must see the basket
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 5 Jul 2017 23:03:24 +0000 (20:03 -0300)]
Bug 18870: Force scalar context for Koha::Club methods
These 2 methods are called from the template in list context.
However since bug 18539 Koha::Objects->find can no longer be called in
list context.
Forcing the context to scalar fixes the problem and should not
introduced side-effects.
Test plan:
- Create a club template
- Create a club using this template
=> Without this patch you should no longer get the following error:
Template process failed: undef error - Cannot use "->find" in list
context at /home/vagrant/kohaclone/Koha/Club.pm line 51.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 17 Apr 2017 12:00:33 +0000 (09:00 -0300)]
Bug 17738: Remove warning about redeclaration of $patron
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
At this point, there should not be any occurrences of
GetReservesFromBorrowernumber anymore.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Jonathan Druart [Wed, 7 Dec 2016 13:42:48 +0000 (14:42 +0100)]
Bug 17738: Replace GetReservesFromBorrowernumber with Koha::Patron->get_holds
This patch replace the different calls to GetReservesFromBorrowernumber
with a calls to Koha::Patron->get_holds.
In some places we need to get a restricted set of holds, that's why we
process a search on this holds returned by ->get_holds (on the found
status for instance).
The changes are quite trivial and reading the diff should be enough to
catch bugs.
Test plan:
I would suggest to test this patch with patches from bug 17736 and bug 17737,
to place different kind of holds (biblio and item level, future and
past).
Then do a whole workflow to detect bug, view a record, delete record,
order, place a hold on an item which has been ordered, etc.
The hold's informations should always be the same without or without
these patches.
Tested both patches together, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Marcel de Rooy [Fri, 23 Jun 2017 08:43:16 +0000 (10:43 +0200)]
Bug 17843: [QA Follow-up] Some polishing
Resolve warning from members/summary-print.pl:
"my" variable $itemtype masks earlier declaration in same scope
Test if find returns a Koha object in GetDescription.
Test if find returns a Koha object too in shelves.pl. While testing, I had
a crash on a biblioitem with itemtype NULL (bad record, but these things
tend to happen somehow.)
Can't call method "imageurl" on an undefined value at virtualshelves/shelves.pl line 253.
Same for opac/opac-shelves.pl.
Note: Did not add tests everywhere but generally, I have the impression that
we do not sufficiently test on the results of Koha::Object->find. Mostly we
just assume that it will find a record. Several reports include fixes to
resolve that wrong assumption.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Jonathan Druart [Wed, 4 Jan 2017 09:30:47 +0000 (10:30 +0100)]
Bug 17843: Replace C4::Koha::getitemtypeinfo with Koha::ItemTypes
The C4::Koha::getitemtypeinfo subroutine did the almost same job as
GetItemTypes. On top of that it returned the imageurl value processed by
C4::Koha::getitemtypeimagelocation.
This value is only used from the 2 [opac-]shelves.pl scripts. Then it's
better not retrieve it only when we need it.
Test plan:
Play with the different scripts touched by this patch and focus on item
types. The same description as prior to this patch must be displayed.
Note that sometimes it is not the translated description which is
displayed, but that should be fixed on another bug report. Indeed we do
not expect this patch to change any behaviors.
Signed-off-by: Lari Taskula <lari.taskula@jns.fi> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
TEST PLAN
----------
git grep -i getsupplierby
-- only the code removed and the test tweaked
git bz apply 18782
sudo koha-shell -c bash kohadev
prove -v t/db_dependent/Serials.t
qa -v 2 c 1
exit
-- sign off
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Marcel de Rooy [Wed, 8 Mar 2017 15:28:59 +0000 (16:28 +0100)]
Bug 18228: Adjust Virtualshelves.t
Test plan:
Run t/db_dependent/Virtualshelves.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Eric Gosselin <eric.gosselin@inlibro.com> Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Wed, 8 Mar 2017 14:31:25 +0000 (15:31 +0100)]
Bug 18228: Implement the new columns in code
The two new columns as mentioned in the commit message of the table
revision must be used in the codebase now.
Highlighting some changes in Koha::VirtualShel[f|ves]:
[1] Additional methods is_public and is_private.
[2] Method add_biblio did not check permissions. Does now. No impact on the
interface, but one call in the unit test was affected.
[3] Method remove_biblios is signficantly simplified. Removed a FIXME.
[4] Method can_biblios_be_removed now redirects to can_biblios_be_added.
A followup report may deal with unifying those routines.
[5] Condition in get_some_shelves changed.
[6] The reference to allow_add in get_shelves_containing_record can simply
be removed.
opac-shelves.pl and shelves.pl now pass the default setting of Owner only
to the template.
Templates shelves.tt and opac-shelves.tt now include the new permission
field with three choices as mentioned in the table revision patch.
opac-addbybiblionumber.pl and addbybiblionumber now need a check on
allow_change_from_owner; search conditions slightly adjusted to the new
permission scheme.
Test plan:
When we refer to visibility in the test plan, please check the Add to-combo
on opac search results and staff results. And check opac-addbybiblionumber
by clicking Save to Lists from opac results.
The step 'Check delete' means: open the list in opac and check if you see
the Delete button below the entries (only check, do not delete).
[ 1] Create private list I01 (perm=Owner)
[ 2] Check visibility: Seen.
[ 3] Add a book. (Change by owner should be allowed.)
[ 4] Check delete: Yes.
[ 5] Edit list I01, set perm=Nobody
[ 6] Check visibility: Not seen.
[ 7] Check delete: No.
[ 8] Share list I01 with another patron.
[ 9] Check visibility for the other patron: Not seen.
[10] Check delete for the other patron: No.
[11] Change permission of list I01 to Anyone (by owner).
[12] Check visibility for the other patron: Seen.
[13] Let other patron add a book (change is allowed).
[14] Let owner delete the same book again (change allowed).
[15] Create public list U01 (perm=Owner)
[16] Check visibility: Seen.
[17] Add a book. (Change by owner should be allowed.)
[18] Login as other user. Check visibility: Not seen. Check delete: No.
[19] Change permission of U01 to Nobody (by owner)
[20] As owner: Check visibility: Not seen. Check delete: No.
[21] As other user: Check visibility: Not seen. Check delete: No.
[22] Create public list U02 (perm=Anyone)
[23] Add a book by owner.
[24] Delete the same book by other user. Add another book.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Wed, 8 Mar 2017 13:19:34 +0000 (14:19 +0100)]
Bug 18228: DBIx schema changes for Virtualshelve.pm
No test plan.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Wed, 8 Mar 2017 13:10:32 +0000 (14:10 +0100)]
Bug 18228: Table revision of virtualshelves
In order to make the permissions easier, we will replace the columns
allow_add, allow_delete_own and allow_delete_other by two new columns
allow_change_from_owner and allow_change_from_others.
The distinction between adding or deleting an entry is no longer made.
If you have change permission, you can do both. Also deleting an entry
does no longer depend on who added the entry.
Formerly, the owner could always add entries. It is now possible to
make a list readonly.
We will not use the combination of owner=no and other=yes. This will
leave us three possibilities:
[1] owner=no, other=no: The list is read-only. No one can change
contents of the list. Naturally, the owner can edit permissions.
[2] owner=yes, other=no: Only the owner can change contents.
[3] owner=yes, other=yes: Anyone seeing the list can change contents.
This especially applies to shared lists and public lists.
The two database columns will be presented in the interface as one
permission field offering the three abovementioned options.
Test plan:
[1] Run the db rev.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel de Rooy [Thu, 22 Jun 2017 06:55:16 +0000 (08:55 +0200)]
Bug 18214: Add check for shared or public list
Following the idea behind bug 10865, we are only showing the permissions
when the list is shared or public.
Adding a simple test in opac-shelves here.
Note 1: Since the owner can always add or delete entries, the permissions
will not be relevant anymore for a strictly private list.
Note 2: Staff view always shows the permissions. This could have been
changed here too, but that change is far less urgent (bug 10865 did not
touch staff view and bug 18228 will rearrange permissions anyway).
Test plan:
[1] Verify on OPAC that you see the permissions for a private list with
shares or a public list. And you do not see them for a private list
without shares.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Marcel de Rooy [Mon, 6 Mar 2017 08:44:48 +0000 (09:44 +0100)]
Bug 18214: Cannot edit list permissions of a private list
If you have disabled the pref OpacAllowPublicListCreation, your users are
not able to edit the list permissions for private/shared lists.
For a private list they may only be theoretically relevant, but for a shared
list they are relevant.
Since we do not always know the history of a list (has it been public or
shared, does it contains entries from other users) and therefore permissions
are even relevant for a currently private list, we should just allow editing
these permissions.
Test plan:
[1] Do not yet apply this patch.
[2] Disable OpacAllowPublicListCreation.
[3] Create a private list in OPAC. Edit the list. Verify that you do not
see the permission combo boxes.
[4] Apply this patch. Edit the list again. Do they appear now?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised.
Jonathan Druart [Wed, 21 Jun 2017 17:14:09 +0000 (14:14 -0300)]
Bug 18651: Do no LOCK/UNLOCK the table
We cannot LOCK the old_issues table here, other tables are accessed and DBIx::Class rename it with "me":
DBD::mysql::st execute failed: Table 'me' was not locked with LOCK
TABLES [for Statement "SELECT `me`.`issue_id`, `me`.`borrowernumber`,
`me`.`itemnumber`, `me`.`date_due`, `me`.`branchcode`,
`me`.`returndate`, `me`.`lastreneweddate`, `me`.`renewals`,
`me`.`auto_renew`, `me`.`auto_renew_error`, `me`.`timestamp`,
`me`.`issuedate`, `me`.`onsite_checkout`, `me`.`note`, `me`.`notedate`
FROM `old_issues` `me` WHERE ( `me`.`issue_id` = ? )" with ParamValues:
0='2'] at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1832.
Consequence: We could have a checkin refused if there is a race, but
this is the simplest and safest way to fix it.
Marc Véron [Wed, 14 Jun 2017 09:10:56 +0000 (11:10 +0200)]
Bug 18800: Patron card images: Add some more explanation to upload page and fix small translatabiity issue
The file
koha-tmpl/intranet-tmpl/prog/en/modules/help/patroncards/image-manage.tt
has a small translatability issue (sentence splitting by html tags).
This patch fixes it and adds a little bit more explanation about
uploading, using and replacing such images.
To test:
- Verify that text changes make sense
- Apply patch
- Go to Home > Tools > Patron card creator > Images and verify
that the page displays properly
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Fri, 26 May 2017 19:08:27 +0000 (21:08 +0200)]
Bug 18684 - Get rid of %%] in translation for currency.tt
File add koha-tmpl/intranet-tmpl/prog/en/modules/admin/currency.tt exposes
parts of template directives due to html tags inide directives. Fix it using
the HtmlTags filter.
To verify:
- Create a translation for a language 'aa-AA
- po file aa-AA-staff-prog.po / translate.koha-community.org for 17.05 contains a line
'%%]'%sCurrencies %s
To test:
- Apply patch on top of Bug 18665
- Recreate translation
- Verify that line above is gone
- Verify that in staff client currencies administration wors as before
Followed test plan and it worked as intended Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 18684: (followup) Move 2 closing h3 tags to end of previous lines
See comment #4
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Thu, 25 May 2017 19:52:09 +0000 (21:52 +0200)]
Bug 18665: Add test for HtmlTags.pm
This patch adds tests for the tt filter HtmlTags.pm
To test: prove -v t/HtmlTags.t should pass
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Wed, 24 May 2017 14:06:31 +0000 (16:06 +0200)]
Bug 18665 - Translatability: Add tt filter to allow html tags inside tt directives
HTML tags inside template toolkit directives are not allowed because of translation issues.
Add a filter that handles HTML tags.
Note you need to write quotes ' around the text you want displayed as a
heading
To test:
- Apply patch
- Add [% USE HtmlTags %] to the top of a tt file
- Add something like [% 'My nice title' | $HtmlTags tag="h1" %] to the tt file
- Verify that in output 'My nice title' has h1 tags
- Change template directive to something like
[% 'My nice title' | $HtmlTags tag="h1" attributes='title="This is a nice title attribute"' %]
- Verify that title attribute displays in output (source code or tooltip on 'My nice title')
Notes: - Tests are planned for a second patch
- Update for Wiki coding guidelines
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 21 Jun 2017 14:05:59 +0000 (11:05 -0300)]
Bug 18651: Fix tests if no circ rule exist
The following test is failing on Jenkins:
# Subtest: Handle ids duplication
1..4
ok 1 - No account lines should exist on old issue_id
not ok 2 - Two account lines should exist on new issue_id
ok 3 - AddReturn should return the issue with the new issue_id
ok 4 - If an item is checked-in, it should be moved to old_issues even if the issue_id already existed in the table
not ok 4 - Handle ids duplication
When no circ rule exist
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Tue, 20 Jun 2017 13:03:35 +0000 (15:03 +0200)]
Bug 18651: [QA Follow-up] Fix the MAX(issue_id) calculation
Found this by inserting the same issue_id in old_issues before checkin:
The call to ->search( )->get_column is in scalar context and will
return the number of results, i.e. always 1.
If you have an issue_id 2 in old_issues, it will crash:
DBIx::Class::Storage::DBI::_dbh_execute(): Duplicate entry '2' for key 'PRIMARY'
The fix is fairly simple: Put get_column in list context and pick the first
array entry.
NOTE: Using DBIx's get_column()->max here might look simpler here.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Jonathan Druart [Mon, 22 May 2017 17:30:48 +0000 (14:30 -0300)]
Bug 18651: Update accountlines.issue_id is the issue_id has been changed during the move
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Jonathan Druart [Mon, 22 May 2017 17:26:25 +0000 (14:26 -0300)]
Bug 18651: Do not charge if the checkin failed
2. If the move fails for whatever reason (see
https://lists.katipo.co.nz/pipermail/koha/2017-May/048045.html for an
example), fines can be charged. It should not
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Jonathan Druart [Mon, 22 May 2017 15:02:20 +0000 (12:02 -0300)]
Bug 18651: Update issue_id in AddReturn
1. AddReturn returns a $issue hashref with the old issue_id value
=> At first glance it does not affect anything, but would be good to fix
it for future uses.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Owen Leonard [Thu, 11 May 2017 16:45:42 +0000 (16:45 +0000)]
Bug 18582 - Hide empty rows in detailed suggestion view
This patch adds a check for the existence of various template variables
before showing the row containing that data. This will prevent the
display of rows containing labels but no data in the suggestions
detailed view.
To test, apply the patch and go to Acquisitions -> Suggestions.
View the detail page of various suggestions and confirm that only fields
with data are displaying.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Wed, 31 May 2017 14:19:35 +0000 (16:19 +0200)]
Bug 18697: Final polishing
GetFictiveIssueNumber:
Returns undef instead of 0 for irregular frequencies. Also added to POD.
Removed unused variable $wkno.
Adding a return makes the if(unit) unneeded.
Replaced (a+b)/b by 1+a/b.
_delta_units:
Added a comment about its parameters.
GetFictiveIssueNumber.t:
Adjusted the tests for irregular frequencies accordingly.
Test plan:
[1] Run t/db_dependent/Serials/GetFictiveIssueNumber.t
[2] Run t/db_dependent/Serials/GetNextDate.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Wed, 31 May 2017 13:20:40 +0000 (15:20 +0200)]
Bug 18697: Adjusting unit tests for dayly serial frequencies
No changes were needed for GetNextDate.t.
In GetFictiveIssueNumber.t we add a subtest for daily frequencies.
Test plan:
[1] Run t/db_dependent/Serials/GetFictiveIssueNumber.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Tue, 30 May 2017 14:44:46 +0000 (16:44 +0200)]
Bug 18697: Fix date calculation for dayly frequencies in Serials
The changes in _get_next_date_day are actually only cosmetic. The sub
now reads exactly the same as its counterparts for other units, but
the results are exactly the same as before.
In GetFictiveIssueNumber we now call _delta_units for each type of unit.
The two Delta_Days calls are moved to _delta_units. Note that this also
is a cosmetic change; results should be exactly the same.
Test plan:
[1] Edit a subscription. Test predication pattern for some daily freq.
[2] Run t/db_dependent/GetNextDate.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Tue, 30 May 2017 13:56:22 +0000 (15:56 +0200)]
Bug 18697: Adjusting unit tests for weekly serial frequencies
Corrections and added unit tests following the changes of the first patch.
GetFictiveIssueNumber.t: New subtest for weekly frequencies.
GetNextDate.t: Correcting a few dates one day. If we use 2/week, we will
calculate an interval of 3 days and correct with 4 days at the end of
the cycle. The connection with firstacqui is not relevant anymore.
Test plan:
[1] Run t/db_dependent/Serials/GetFictiveIssueNumber.t
[2] Run t/db_dependent/Serials/GetNextDate.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Tue, 30 May 2017 13:01:52 +0000 (15:01 +0200)]
Bug 18697: Fix date calculations for weekly frequencies in Serials
Same solution applied as in bug 18356/18607. Consistency++
The code in _get_next_date_week is again very similar to the code in
_get_next_date_month or _get_next_date_year. I will not merge them here,
but we could consider that in the future.
Code in GetFictiveIssueNo has been adjusted similarly to month and year.
Test plan:
[1] Do not apply this patch. Create a subscription for 3/week.
When the first issue date is on a Saturday or Sunday, the
intervals in the prediction pattern are 0,0,7,0,0,7,etc.
Starting on Wed-Fri 1,1,5,etc. Starting on Mon-Tue 2,2,3,etc.
[2] Apply this patch. Check again.
The interval should be always 2,2,3 now and no longer depend on the
day_of_week of first issue date.
[3] Check another weekly frequency with multiple units per issue.
Say 1 issue/3 weeks.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Mon, 29 May 2017 10:08:40 +0000 (12:08 +0200)]
Bug 18607: Adjusting unit tests for monthly serial frequencies
The changes in the first patch require some corrections as well as
additional test cases.
GetNextDate.t: Since the calculation for multiple issues per unit has
slightly changed, a few dates (day 15 or day 16) have been changed in the
unit test; when we use 2/month, the algorithm now always adds 15 days.
Added a few test descriptions in this regard too.
GetFictiveIssueNumber.t: Add the monthly subtest with two test cases. In
the first case we tests multiple units per issue, and in the second case
we test multiple issues per unit (month).
Test plan:
[1] Run t/db_dependent/Serials/GetFictiveIssueNumber.t
[2] Run t/db_dependent/Serials/GetNextDate.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Tue, 16 May 2017 12:46:55 +0000 (14:46 +0200)]
Bug 18607: Fix date calculations for monthly frequencies in Serials
Similarly to the solution of bug 18356, this patch fixes the date
calculation for monthly frequencies.
The calculation in GetFictiveIssueNumber now makes use of the new
_delta_units sub introduced on bug 18356.
The calculation in _get_next_date_month is also very similar to the one
in _get_next_date_year. I do not merge them here, but this could still
be considered later on. At least consistency is achieved now between
both routines. The connection with firstacquidate has been cut thru
just like for year units.
Test plan:
[1] Without this patch, look at the prediction pattern for a
subscription with first issue on Feb 21 and 5 per month. The first
issues will be 21, 22, 23, 24, 25. Then jumping to 21, 23, 25, etc.
[2] Apply the patch. Look at the same prediction pattern. You will now
see 6 day intervals and a new cycle starting on the 21st.
So Feb 21, 27, Mar 5, 11, 17 and Mar 21, 27, etc.
[3] Edit an subscription. Try a few other monthly frequencies.
[4] The next patch adjusts related unit tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Tue, 9 May 2017 15:01:46 +0000 (17:01 +0200)]
Bug 18356: Fix date calculations for yearly frequencies in Serials
The problem as described on BZ 18356 is a combination of an error in
GetFictiveIssueNumber and GetNextDate for unit==year.
[1] In GetNextDate the Add_Delta_YM calculation should be applied only to
frequencies based on years per unit.
In the case of multiple units per year we calculate the number of days to
add. And if we have reached the end of a cycle, we correct the
rounding applied in the cycle.
NOTE 1: We obsolete the idea here of rebasing dates on firstacqui. In case
of manual adjustments, we probably do not want it. And otherwise we do not
need it anymore due to the correction at the end of a cycle.
NOTE 2: The calls to Add_Delta_YM are intentionally not corrected for leap
years. Say you start at 2016-02-29. If you use 1/yr or 1/2yr, you will
switch to the Feb 28th in the following years. In 2020 there will be no
switch to Feb 29 again; if someone should need it, please use a manual
adjustment. This is probably highly exceptional.
[2] In GetFictiveIssueNumber the year should be decreased by one if you
have more units per year and you did not yet reach firstacqui day and
month. This affects calculations in GetNextDate with irregularities.
NOTE 1: I added a wrapper around Date::Calc::N_Delta_YMD in order to improve
its results; this will especially be needed when we use it later for
month units.
NOTE 2: In case of manual adjustments this calculation does not really make
sense. Another report should deal with improving irregularities.
Test plan:
[1] Verify that both GetNextDate.t as well as GetFictiveIssueNumber.t pass.
[2] Look at the prediction pattern for a few frequencies.
For example: 1 iss/y, 1 iss/2y, 5 iss/y.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch deals with tests for yearly frequencies.
Adjust/extend GetNextDate.t:
[1] Adjust mixup of units/issues in a description.
[2] Add testing +2 years on 29-2 of leap year for freq 1 issue/2 years.
[3] Add tests for freq 9 issues/year.
Add GetFictiveIssueNumber.t:
[1] Two subtests are provided for irregular frequencies (very trivial) and
for year frequencies (with four specific test cases).
Test plan:
[1] Run t/db_dependent/Serials/GetNextDate.t
[2] Run t/db_dependent/Serials/GetFictiveIssueNumber.t
Note: Without the second patch both tests should fail. This shows the need
of the adjustments in the second patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Thu, 15 Jun 2017 22:07:53 +0000 (18:07 -0400)]
Bug 18807: t/db_dependent/www/batch.t fails
get() does not take two parameters. fixed.
prove and run koha qa test tools
Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 14 Jun 2017 19:56:13 +0000 (16:56 -0300)]
Bug 18807: Fix tests www/batch.t
Several things are wrong here:
1. It assumes that import_record_id is the biblionumber
=> Wrong, it is only true when the DB is empty and that the 2 AI equal 1
2. The encoding in the template is 'UTF-8', not 'utf8', it leaded to
"stage-marc-import.pl: marc21record.mrc: Unexpected charset UTF-8, expecting utf8"
3. We did not test that the biblio was correctly imported
Test plan:
Make sure the tests now pass.
For the www tests you need to set the following env vars:
KOHA_USER, KOHA_PASS, KOHA_INTRANET_URL and KOHA_OPAC_URL
Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Wed, 14 Jun 2017 18:53:18 +0000 (15:53 -0300)]
Bug 18806: Fix batch revert
Since bug 18242: When a biblio is deleted, a new transaction is created.
tools/manage-marc-import.pl use the AutoCommit flag, which does not
allow nested transaction.
AutoCommit must not be used.
Test plan:
Import a batch, then revert it.
The biblios must have been correctly deleted, they were not before this
patch
Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
- Review code, verify that line breaks are removed
- Run QA tools
- Bonus test: Create a "language" aa-AA and verify that no fragments
containign %%] are picked for the 6 files
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Translators should not be confronted with such code internals.
To test:
- Review code change (it removes line breaks)
- Bonus test: Create a new translatin for "language" aa-AA and
verify that the line no longer appears in aa-AA-staff-prog.po
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Wed, 14 Jun 2017 16:08:43 +0000 (13:08 -0300)]
Bug 18804: (bug 13501 follow-up) Fix add item form (select2)
Hard to say here, select2 adds so many elements that we need to ignore.
Here we just assume that input text with an id starting with
tag_952_subfield must be filled
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
With bug 11088 and bug 16400 the submit node switched from:
<input type="submit" name="save" onclick="return check_form_borrowers();" value="Save" />
to:
<button type="submit" name="save" onclick="return check_form_borrowers">
then finally to:
<button class="btn btn-small" id="saverecord" type="submit" name="save" onclick="return check_form_borrowers();">
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 16286 replaced the submit node:
<input type="button" value="Save" onclick="Check(this.form);" />
with
<input type="submit" value="Save" />
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Jonathan Druart [Tue, 13 Jun 2017 20:43:39 +0000 (17:43 -0300)]
Bug 18804: Skip selenium tests if Selenium::Remote::Driver is not installed
We do not want these tests to fail if the module is not installed.
This module is not in the dependencies of Koha and it is good as it.
A developper who wants to use it will know what to do.
It is part of RM duties to make sure these tests pass
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Lee Jamison <ldjamison@marywood.edu> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Marcel de Rooy [Fri, 16 Jun 2017 05:57:14 +0000 (07:57 +0200)]
Bug 18361: [QA Follow-up] Resolve warning on undef values supplied
The following warning was raised in Letters.t:
DBIx::Class::ResultSource::_minimal_valueset_satisfying_constraint():
NULL/undef values supplied for requested unique constraint 'primary' (NULL
values in column(s): 'id'). This is almost certainly not what you wanted,
though you can set DBIC_NULLABLE_KEY_NOWARN to disable this warning.
This warning is triggered by this line in C4/Letters.pm:
Koha::SMS::Providers->find( $member->{'sms_provider_id'} );
As you already guessed, the sms_provider_id returns undef.
Resolved in sub find by testing if there are parameters and if so, they
should not be all undefined. (In most cases there will be only one
parameter; but this report is about composite keys.)
Added a trivial test case in Objects.t too.
Test plan:
Run t/db_dependent/Koha/Object.t
Run t/db_dependent/Koha/Objects.t
Run t/db_dependent/Letters.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 18361: Additional tests for Koha::Objects->find
Adding a subtest find in t/db_dependent/Koha/Objects.t.
Test plan:
Run t/db_dependent/Koha/Objects.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Fri, 31 Mar 2017 11:52:15 +0000 (13:52 +0200)]
Bug 18361: Koha::Objects->find should accept composite primary keys
Changes the $id parameter to an array. (IssuingRule has three keys.)
The build_object method in TestBuilder.pm has been adjusted to pass
multiple primary key values to find.
Also adjusted the POD section to show more clearly that we accept
the same parameters as DBIx ResultSet does.
Test plan:
Run t/db_dependent/Koha/Object.t
Run t/db_dependent/Koha/Objects.t
Run t/db_dependent/TestBuilder.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Tue, 18 Apr 2017 16:49:18 +0000 (13:49 -0300)]
Bug 18539: Forbid list context calls for Koha::Objects->find
Reading https://perlmaven.com/how-to-return-undef-from-a-function
this sound like the more correct behaviour.
Considering:
$template->param(
stuff => Koha::Stuffs->find( $id ),
foo => 1,
);
without this patch, if the $id does not represent any rows in the DB,
stuff will be assigned to 'foo' and $foo will be undef in the template.
That can lead to very bad side-effects.
With this patch we make sure that it will never happen again.
Test plan:
prove t/db_dependent/Koha/Objects.t
should return green
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 27 Feb 2017 08:59:53 +0000 (08:59 +0000)]
Bug 17975: Let C4::Letters manage today param substitution
The today parameter is properly handled from C4::Letters subroutines, we
do not need to pass it from callers.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 16 Jan 2017 16:33:39 +0000 (17:33 +0100)]
Bug 17975: TT syntax for notices - Prove that HOLD_SLIP is compatible
Here we need to test <<today>>.
We already pass a value, but it was wrong. We must pass a string, not a
DateTime object, otherwise the KohaDates plugin will not display the
hours part if we need it.
Test plan:
Define a HOLD_SLIP notice template to match your need.
Do not forget to use
[% today | $KohaDates %]
or
[% today | $KohaDates with_hours => 1 %]
To access data from the reserves table, use the 'hold' variable
Tested both patches together with several date formats, works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 16 Jan 2017 15:58:23 +0000 (16:58 +0100)]
Bug 17965: TT syntax for notices - Prove that DUEDGST is compatible
This notice template have the particular feature of using <<count>>.
This value is substitued during the process of the notice template.
For the TT syntax, all what we need is to send the values to substitute to the
template.
Note that items.content can also be used in these template, you can have
a look at bug 17967 to see a better alternative to this marker.
Test plan:
Generate DUEDGST and DUE notice messages.
You should be able to generate the same messages with the TT syntax.
Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Mon, 13 Mar 2017 01:56:19 +0000 (22:56 -0300)]
Bug 18254: Remove call to GetItemsByBiblioitemnumber call from additem.pl
The code from additem to delete all the items of a bibliographic record
is very ackward.
This patch simplifies the algorithm and make the code more readable.
Test plan:
Remove all the items of a bibliographic records
If at least 1 item is checked out you should get an error.
No change with the current behavior is expected.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Thu, 18 May 2017 18:02:33 +0000 (20:02 +0200)]
Bug 18630: Translatability (Clubs): 'Cancel' is ambiguous and leads to mistakes
The button to cancel a club enrollement is labelled with 'Cancel'. That is ambiguous and translates e.g. in German to 'Abbrechen' which can lead to
mistakes.
To test:
- Apply patch
- Enroll a patron to a club
- Enable public enrollment in OPAC
- Verify that the button to cancel enrollment in both OPAC and staff client
reads 'Cancel enrollement' (instead of 'Cancel' without patch)
(The button appears on the patron's detail pages in OPAC and staff client)
Amended for comment #4 / mv
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
David Cook [Wed, 11 Jan 2017 04:36:05 +0000 (15:36 +1100)]
Bug 17710 - C4::Matcher::get_matches and C4::ImportBatch::GetBestRecordMatch should use same logic
C4::ImportBatch::GetBestRecordMatch uses SQL to sort by score descending
then candidate_match_id descending. With C4::Matcher::get_matches, I
implement the same sort but use Perl code to do it, since we're sorting
search results.
It's a simple change, but it's in a big block of code, so I don't have
unit tests.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mark Tompsett [Mon, 5 Jun 2017 22:18:07 +0000 (18:18 -0400)]
Bug 18732: Noisy t/SMS.t triggered by koha_conf.xml without sms_send_config
Upgraded systems may be lacking sms_send_config which makes t/SMS.t noisy.
This silently bypasses the problem.
Remove sms_send_config from your koha-conf.xml file
prove t/SMS.t
-- it will be noisy, but pass.
apply patch
prove t/SMS.t
-- noise gone.
run koha qa test tools.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Works correctly as indicated by the testing plan.
No "uninitialized" noise after patch is applied.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Slightly amended: turned the iif around.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marc Véron [Sun, 4 Jun 2017 17:55:08 +0000 (19:55 +0200)]
Bug 11235: Names for reports and dictionary are cut off when quotes are used
To reproduce for saved reports:
- Go to Home > Reports > Guided reports wizard
- Create a report with double quotes in it's name, e.g. 'My "double quoted" report'
- Go to "Saved reports", locate in the list the new report (name is correct here,
is correct in database as well)
- From the selection button at the right choose "Edit"
- Result: Content of edit field for the report name is truncated (displays only: 'My')
To reproduce for Reports dictionary:
- Go to Home > Reports > Guided reports wizard
- Create a new definition, give it the name 'The "double quoted" definition' and enter
a text with double quotes for "Description"
- Save
- Verify that in the list of definitions both name and descriptions are truncated
(in database as well)
To test:
- Apply patch
- Verify that issues described above can no longer be reproduced
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Julian Maurice [Wed, 12 Oct 2016 10:38:16 +0000 (12:38 +0200)]
Bug 13452: Fix for plack
Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Julian Maurice [Fri, 2 Oct 2015 09:31:10 +0000 (11:31 +0200)]
Bug 13452: Fix obvious issues in issues_avg_stats.pl
- Remove joins with issuingrules which are not needed
- Fix the SQL query so that $weight is now the value of COUNT(*) instead
of a timestamp
- QA fix: '$column eq $itype' instead of '$column =~ $itype' (same for
$line)
Signed-off-by: Srdjan <srdjan@catalyst.net.nz> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Katrin Fischer [Mon, 8 Jun 2015 23:04:07 +0000 (01:04 +0200)]
Bug 13452: 'Average loan time' report to obey item-level_itypes preference
Fixes the 'Average loan time' report so that the system
preference setting item-level_itypes is taken into account.
Before the patch, the report was always using the biblio
level itemtype. With the patch, it will depend on the pref
setting.
To test:
- Run various reports, compare results with both
possible pref settings
- Try limiting your search in various ways, especially
on a specific itemtype
- Make sure you switch checkboxes in testing,
using itemtype as the row or as the column
Notes:
- Filtering on a specific itemtype on master was not working
if the itemtype was chosen as column. The patch should fix that.
- Fixes headings and breadcrumbs so that the name of the report
is the same as on the reports start page
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Owen Leonard [Thu, 8 Jun 2017 15:19:22 +0000 (15:19 +0000)]
Bug 18752 - Automatic item modifications by age should allow 'blank' values
This patch modifies the automatic item modification by age template to
correct errors in form validation:
- Age in days should not be required
- A value should not be required in substitutions.
To test, apply the patch and clear your browser cache if necessary.
- Go to Tools -> Automatic item modification by age.
- Confirm that when editing or creating a rule the only required field
is the substitutions field name.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Marcel de Rooy [Mon, 15 May 2017 07:58:04 +0000 (09:58 +0200)]
Bug 18601: OAI/Sets.t mangles data due to truncate in ModOAISetsBiblios
This patch replaces the TRUNCATE statement in ModOAISetsBiblios by a
DELETE statement. A truncate will cause an implicit commit and will
therefore commit the transaction started in the test script.
Also simplifying the module load in the test script.
Test plan:
Do not apply this patch and observe that biblio records are added to your
database by running t/db_dependent/OAI/Sets.t.
Apply this patch, run the test again and verify that it does no longer
add records to your biblio table.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Josef Moravec <josef.moravec@gmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
projects / koha.git / log