Jonathan Druart [Wed, 31 Dec 2014 11:09:49 +0000 (12:09 +0100)]
Bug 13502: Add tests to highlight the problem
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Tue, 30 Dec 2014 21:20:59 +0000 (10:20 +1300)]
Bug 13502: Code introcduced in 1861 wrongly assumes a null userid is unique
To test
1/ Create a borrower with '' as their userid, you may have to edit a
row in the db to do this
2/ Run perl t/db_dependent/Circulation/CheckIfIssuedToPatron.t
3/ Notice some tests fail and you see
DBD::mysql::st execute failed: Duplicate entry '' for key 'userid'
at /home/chrisc/git/catalyst-koha/C4/SQLHelper.pm line 184.
4/ Apply the patch
5/ Run the tests again, notice they now pass
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Check_Userid returns 1 if it is unique. So this means unique userids
will always be discarded and new ones created.
This is why all the tests depending on a userid are now failing
To test
1/ run perl t/db_dependent/Serials_2.t
2/ Notice lots of tests fail
3/ OR Add a borrower with a userid set, notice the userid is ignored
and one is generated instead
4/ Apply patch
5/ Add a new borrower, notice the userid sticks (if it is unique)
6/ Run perl t/db_dependent/Serials_2.t notice tests pass
7/ Run perl t/db_dependent/Members.t notice tests still pass
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Colin Campbell [Thu, 27 Nov 2014 16:07:23 +0000 (16:07 +0000)]
Bug 13252 Allow for IPv6 formatted addresses in Port definition
The SIP config has allowed you to specify an interface ip as
part of the listeners/service/port attributei
e. g. as port="127.0.0.1:6001/tcp"
with IPv6 the equivalent would normally be
as port="[::1]:5001/tcp"
However in this case incoming connections will get rejected because
Configuration constructs a string without the brackets
This patch makes tests both formats on incoming connections so that
they are accepted as they were previously
In future the best course is not to include a port identifier in the
port definition then if the server has ipv6 it will bind to all
interfaces and accept both IPv4 and IPv6 traffic
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
before patch:
disconnects immediately. Log output:
Bad arg length for Socket::unpack_sockaddr_in, length is 28, should be 16
after patch:
operates normally
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 10 Dec 2014 14:02:57 +0000 (09:02 -0500)]
Bug 13341 - Hard-coded "Preview" text in OPAC openlibrary.js
The OpenLibrary JavaScript includes an untranslated string, "Preview."
This patch move the string to the template so that it can be translated.
To test, apply the patch and test that the translator picks up the
string:
1. From misc/translator run 'perl translate update [lang]' (e.g. de-DE)
2. Edit misc/translator/po/[lang]-opac-bootstrap.po and add a
translation for the updated "Preview" string
3. Remove the "#, fuzzy" marker from that entry
4. From misc/translator run 'perl translate install [lang]'
5. Enable the [lang] translation for the OPAC in system preferences
6. Enable the OpenLibraryCovers system preference.
7. In the OPAC switch to the [lang] translation.
7. View the detail page for a title for which there is an OpenLibrary
cover image. Below it you should see a preview link with the
translated string you added in step 2.
Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Fri, 12 Dec 2014 12:18:47 +0000 (12:18 +0000)]
Bug 13447: Fixed HTML Email Reports
A tiny typo made in runreport.pl when updating it for bug 9530 lead to
no body being attached to html emails.
Signed-off-by: Chris <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Lyon3 Team [Fri, 5 Dec 2014 08:27:02 +0000 (09:27 +0100)]
Bug 12895 repair dropbox mode
One day late patrons were restricted even with dropbox mode activated
1) Check in the calendar (Tools/Calendar), that the
previous days you are about to use as date due are
really entered as opening day (never know).
2) Add a suspension in the suspension days parameter
of the circulation rules (Administration/Circulation
and fine rules) to the MOST specific category of
borrower and MOST specific type of document among the
existing rules of the LOGGED IN Site(cf explications
in the circ-rules page).
3) Choose a borrower using the search by category and an
item through the advanced search using the limit by type.
4) Checkout the item selecting the previous opening date
in the Specify-due-date box.
5) Click on Circulation in the upper menu, then on Checkin
and check the Book drop mode. The Book drop date showed
should be the previous opening date.
6) Check in the item : you can see that the patron is restricted
7) apply the patch
8) Redo 1 to 5 : Now, you can see that the patron is not restricted.
9) If you redo the test with two day late, you will see that
the patron is not restricted : that's ok because his
restriction of one day is already finished.
10) If you redo the test with more than two day late, you see
that the patron restriction is, as expected, one day shorter
than it were if the item had been returned without dropbox mode.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 26 Dec 2014 09:22:34 +0000 (10:22 +0100)]
Bug 13458: Display the correct patron categories
Bug 9811 removes useful code.
Actually the AddPatronLists pref is not sent to the template from
members/member.pl.
To fix this issue, we can use the existing not clean way, or compare the
syspref value directly in the template. This second solution is
implemented in this patch.
Test plan:
1/ Set the AddPatronLists pref to 'specific'
2/ On the patron home page (members/members-home/pl), the patron search
result page (members/member.pl after launching a search) and on the
checkouts page/patron search result (circ/circulation.pl after searching
a patron using the check out), verify that the patron category list is
the specific ones.
3/ Test there are no regression with the AddPatronLists pref set to
'general'.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described and fixes the problem.
Note: I am not sure if AddPatronLists makes sense -
if you set it to general patron types, it still preselects the
wrong category type (tried organization, a child patron category
was selected). Also the name is confusiong nowadays with the
Patron list feature.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The RoutingSerials preference controls if the routing
list related functionality is visible in the serials
module.
To test:
- Go to the system preference editor - RoutingSerials
- Check the current description
- Apply patch
- Check the new description
- Verify functionality matches description
NOTE: The preference change is merely cosmetic. The value is
still YesNo. A few git reset --hard origin/master
and page refreshes confirmed expected values.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Colin Campbell [Tue, 18 Nov 2014 14:07:49 +0000 (14:07 +0000)]
Bug 13285 Do the right thing if opacthemes is not set
If opacthemes is not defined updatedatabase reports the
subsequent warnings as an error. Take account of the case where
it is not set and default that to bootstrap.
This is probably a rare occurence, but should be handled
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Tue, 21 Oct 2014 10:18:29 +0000 (06:18 -0400)]
Bug 13124 - Record titles with parentheses causing label weirdness
Test Plan ( using sample data included with Koha )
1) Catalog a record and item with the title "Oh no! or, (How my
science project destroyed the world) /"
2) Edit the DEFAULT template
a) Set layout type to Biblio
b) Set data fields to "title, author, isbn, issn, itemtype,
barcode, itemcallnumber"
c) Set font size to 10
3) Create a batch with just the one item you created
4) Export the PDF with the Avery template and the DEFAULT layout
5) Note the weirdness
6) Apply this patch
7) Re-export the PDF, note it's no longer weird ; )
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13357: Untranslatable strings on itemsearch.tt
This patch enable translation of labels on itemsearch.tt
To test:
1) Translate for a fairly complete language (es-ES de-DE)
2) On staff, go to Search > Item search
3) Check there are many untranslated strings
e.g. Text before pulldowns on first and second box
All options on third box
4) Apply the patch
5) Repeat 1 & 2
6) Check there are now some strings translated
7) Update translation file, check there are some
new strings to translate (may be they are fuzzy)
e.g. "All statuses", "All collection codes"
Patch works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 27 Nov 2014 15:54:21 +0000 (16:54 +0100)]
Bug 13360: C4::Ris assumes that hash keys are ordered - KW
This patch only fixes the KW order.
Test plan:
1/ Choose/create a record with several 6XX (for KW), see the code source
to know which fields you can use
2/ Export this record in RIS format
3/ Verify that the KW lines are ordered following the marc record fields
order.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
We really should refactor this whole thing into Koha::RIS sometime, it's
a horrible module at the moment.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Fri, 12 Dec 2014 17:28:11 +0000 (12:28 -0500)]
Bug 13453: Koha.t daily quote tests assume sample data
By adding quotes 3 and 25 from the sample data, this test can
pass without having the sample quote data loaded.
TEST PLAN
---------
1) Ensure there is no quote id=3 or that it is NOT
Abraham Lincoln.
2) prove t/db_dependent/Koha.t
-- this should fail the daily quote test.
3) apply patch
4) prove t/db_dependent/Koha.t
-- this should *NOT* fail the daily quote test.
5) run koha qa test tools
Followed test plan 1)-4). Without patch, daily quote test failed. With patch, test passed OK. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, leaves actual data unchanged.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Mon, 3 Nov 2014 12:38:48 +0000 (07:38 -0500)]
Bug 1861 [QA Followup] - Fix Check_Userid and unit tests
Check_Userid assumes that a borrowernumber will always be passed in
and thus fails to to return 0 for an already used userid when creating
a new patron.
Unit tests must now also me modified to no longer assume it is possible
to create multiple patrons with the same userid.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Tue, 8 Jul 2014 13:50:08 +0000 (09:50 -0400)]
Bug 1861 - Unique patrons logins not (totally) enforced
The Koha 3.0 patron admin page will prevent you from creating a user who
has an identical OPAC login as someone else (though I would change the
error message from "Login/password already exists." to "Login
already exists.", since it's not the password that's the
problem).
However, there's nothing enforced in the MySQL database to prevent
patrons from being imported or manually inserted with duplicate logins.
Would it be better to change the MySQL spec from this:
KEY `userid` (`userid`)
to this:
UNIQUE KEY `userid` (`userid`)
Test plan:
1) Enter mysql console
2) Attempt to create two borrowers with identical user id's
3) Note you are able to do so
4) Delete these bororwers
5) Apply this patch
6) Run updatedatabase.pl
7) Repeat step 2
8) Note you are now unable to do so
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Leaves deletedborrowers as it is, deleting patrons still works ok.
Works according to test plan.
Database update will only be successful, when no duplicate entries
exist in the database.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch updates the image replacement technique used for Koha's login
page. The old technique used a negative text-indent value to move the
text offscreen, but that begins to fail more and more often as screens
get larger.
The new technqiue is described here:
http://www.zeldman.com/2012/03/01/replacing-the-9999px-hack-new-image-replacement/
Note: This patch has not been tested in any Internet Explorer version!
To test you must have a screen which is wider than 2000 pixels. Apply
the patch, clear your browser cache and view the staff client login
page. The logo on the login form should look correct with no
corresponding text appearing anywhere on the screen.
Signed-off-by: Christopher Brannon <cbrannon@debian.localdomain> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Tue, 9 Dec 2014 23:47:30 +0000 (12:47 +1300)]
Bug 13425 - XSS in intranet facets - Patch for 3.18 and master
To Test
1/ Craft a url like /cgi-bin/koha/catalogue/search.pl?q=smith&sort_by='"><script>prompt('Happy_Holidays')</script>
It is important it must return results and facets
2/ Notice the js is executed
3/ Apply the patch test again
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
No prompts, no functional regressions found.
Checked selecting and undoing facets, show more links and paging. Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 2 Dec 2014 10:37:00 +0000 (11:37 +0100)]
Bug 13370: Inputs overflow in filter
Bug 12376 adds some padding to inputs.
This cause an overflow on the record detail page.
Test plan:
1/ Go on a record detail page with items
2/ Enable filters
Without the patch, the inputs overflow, with the patch it should be
corrected (as before bug 12376).
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Tue, 9 Dec 2014 11:30:36 +0000 (06:30 -0500)]
Bug 13415 - Prevent librarians from scanning multiple items into a single barcode field
It appears that some librarians will attempt to scan items as fast as
they can without checking to make sure the checkout was submitted and
the page reloaded properly. This can cause multiple barcodes to be
scanned into the barcode field if the person is fast enough.
This causes the checkout of both ( or more! ) items to fail.
Test Plan:
1) Apply this patch
2) Attempt to scan two or more items into the barcode field
You can emulate this with a keybaord by hitting a few keys, then
enter, then a few more keys, then enter again. The barcodes don't
need to be valid for this test.
3) Note the dialog stating the barcode has been submitted and to please
wait.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Fri, 12 Dec 2014 21:32:40 +0000 (16:32 -0500)]
Bug 13456: Serials/Claims.t expects no subscriptions
However, this is an unreasonable assumption for a system which
is in use (either lots of testing or production).
TEST PLAN
---------
1) Have a supplier with a late subscription.
2) prove t/db_dependent/Serials/Claims.t
-- will fail
3) apply patch
4) prove t/db_dependent/Serials/Claims.t
-- success
5) run koha qa test tools
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 11 Dec 2014 11:07:17 +0000 (12:07 +0100)]
Bug 10753: Any library is represented by an empty string
And not with "__ANY__"
Test plan:
0/ Don't apply this patch
1/ Create a suggestion for "any library"
2/ Verify suggestions.branchcode contain "__ANY__"
3/ Apply this patch and execute the updatedb entry
4/ Create a suggestion for "any library"
5/ Verify suggestions.branchcode contain "" (for both suggestions).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
Go on catalogue/itemsearch.pl, launch a search and verify the data are
correctly displayed in the table.
Followed test plan. Works as expected. Signed-off-by: Marc Véron <veron@veron.ch> Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The paging seems still a bit buggy, but this makes the
feature usable again!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Sun, 14 Dec 2014 21:31:04 +0000 (22:31 +0100)]
Bug 13461 - Circ always asking for confirmation if RentalFeesCheckoutConfirmation is used
To test:
- Check RentalFeesCheckoutConfirmation is activated
- Try to check out an item without rental fine
- Verify confirmation message without explanation
is shown
- Apply patch
- Verify confirmation message is no longer shown
- Configure itemtype to have rental fee
- Veirfy now the confirmation message appears as
it should
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Aleisha [Mon, 15 Dec 2014 20:57:56 +0000 (20:57 +0000)]
Bug 13436: Adding more options to UsageStatsLibraryType syspref
Added options:
- research
- private
- society or association
- corporate
- government
- religious organization
- subscription
- school
Also changed 'university' to 'academic'
To test:
1) Go on to Global System Preferences and find UsageStatsLibraryType under Administration
2) Click drop-down menu and see all new options described above, as well as 'academic' instead of 'university'
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: replace tab with spaces
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
David Cook [Tue, 16 Dec 2014 01:53:18 +0000 (12:53 +1100)]
Bug 13469 - Unapi path to XSLTs is wrong in OPAC
The Unapi path to XSLTs is wrong in the OPAC.
Unfortunately, it's coded to work just for Git installs, which makes it
tough to test.
_TEST PLAN_
Before applying:
1) Go to
http://GIT-INSTALL/cgi-bin/koha/unapi?id=koha:biblionumber:1&format=oai_dc
2) If the biblionumber exists, it should show you the record in OAI_DC format.
3) Go to
http://REGULAR-INSTALL/cgi-bin/koha/unapi?id=koha:biblionumber:1&format=oai_dc
4) You should get a software error
Apply the patch.
After applying:
1) Refresh the page for
http://yourgitinstall/cgi-bin/koha/unapi?id=koha:biblionumber:1&format=oai_dc
2) It should work exactly the same as before.
Thorough testers:
1) Push the code to that regular test install
2) Try the link again. It will properly show the converted record now.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified that single install
intrahtdocs==/usr/share/koha/clone1712/intranet/htdocs/intranet-tmpl plus
"/prog/en/xslt/" is the location for the required xslt files.
Script unapi in git install is still fine.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Sun, 30 Nov 2014 07:18:11 +0000 (08:18 +0100)]
Bug 12565: Acq: Fix broken link in breadcrumbs
The link back to the basket when creating an order by
searching for an existing record in the catalog is
broken.
To test:
- Start a new basket
- Create a new order line by searching for an existing
record in your catalog
- Try the link back to the basket from the breadcrumbs
at the result list page
- Verify that the link is broken
- Apply patch and retest
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Tue, 9 Dec 2014 05:35:07 +0000 (06:35 +0100)]
Bug 13422 - SCO: "Would you like to rpint a receipt" not translatable
To test:
Set syspref SelfCheckReceiptPrompt to "Show"
Select non English language
Go to Self Checkout and check out an item
Hit "Finish"
Make sure that confirm dialog "Would you like to print a receipt" still
appears
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marcel de Rooy [Tue, 9 Dec 2014 13:50:44 +0000 (14:50 +0100)]
Bug 13416: Typo in marc21_leader.pl position 5 (record status)
Instead of a space in the leader on this position, it should be an a.
Test plan:
1) Log in to staff client
2) Find a record in the catalog
3) Edit the record
4) Click the on builder popup icon.
5) View the page source
-- the option is " " for the 'a- Increase in encoding level'
entry. It really should be 'a'.
6) Apply patch.
7) Repeat steps 1-5
-- the option should be 'a' this time.
8) Run koha qa test tools.
-- Discovered it failed. Provided a patch to fix this.
It does, however, solve the major problem of ' ' vs. 'a'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13470 - pay fines with extended borrower attributes result in application error
Test scenario:
1. ensure that extended patron attributes are turned on in system preferences
2. find borrower which has fine to pay, and click on pay button
3. verify application error
4. apply patch and verify that application error is gone
Signed-off-by: Aleisha <aleishaamohia@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 10 Dec 2014 15:15:26 +0000 (16:15 +0100)]
Bug 13296: (follow-up) permit grep on AUTHUNIMARC
I would prefer not to hide this "stuff".
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fridolin Somers [Wed, 19 Nov 2014 10:56:54 +0000 (11:56 +0100)]
Bug 13296 - error when using z3950 with UNIMARC authorities
When using a z3950 connexion with UNIMARC authorities, you get an error :
Unsupported UNIMARC character encoding [ ] for XML output for UNIMARCAUTH; 100$a -> 20141119
I've seen thant Bug 2060 when adds authorities import adds a special behavior for UNIMARC : marc flavor must be UNIMARCAUTH instead of just UNIMARC.
This patch adds the same behavior when using z3950 connexion and import.
Test plan :
- Use a UNIMARC install
- Define a z3950 connexion for UNIMARC authorities
- Go to Authorities module
- Click on "New from Z39.50"
- Perform a search
=> Without patch : you get the error
=> With patch : you get results
- Import one result
=> You get the authoritie creation form with all datas
You may check same plan with MARC21 install
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
NOTE: depending on the target, the syntax in the configuration
might not be UNIMARC, but MARC21/USMARC instead!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 17 Dec 2014 09:43:34 +0000 (10:43 +0100)]
Bug 13465: Correct the field prefix ambiguity
This is introduced by Bug 12874.
Without this patch, it's not possible to clear (set to an empty string)
an item field.
This appended for field linked to an AV list but even if it's not.
The regex tried to prefix 'my_field' with 'items.' to have
'items.my_field'. It wanted to take care of the case where the prefix
already exists (Actually only 1: 'items.cn_source').
The regex is changed to: "add the prefix only if the string does not
contain a dot".
Moreover an ambiguity existed on the prefix: in marc_subfield_structure,
the kohafield is prefixed, but not in the key of the hash sent to
ModItemFromMarc.
Test plan:
- edit an item, set a status that is controlled by an authorized value
examples tested: damaged, not for loan
- check the status saved correctly
- edit the item again, reset the status to empty
- check the status saved correctly
- edit the item again, reset fields, edit fields
- check the fields saved correctly
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13218: (RM followup) only scroll on actually variable stuff
Most of the page contents have fixed size. The only exception is the
targets list. If the target list grows, then the whole page needs to be scrolled
in order to reach the buttons.
We should make the z3950 targets area scrollable, and remove scrolbars from all
over the place.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Liz [Thu, 20 Nov 2014 07:02:29 +0000 (07:02 +0000)]
Bug 13218: fixing acquisitions z39.50 interface to be consistent with the others.
Changes:
* Two columns of search fields into one
* moves targets from below search fields to the right of them
To test:
* Create a basket in acquisitions
* attempt to add a record to the order from an external source
* note the changes to the layout
* complete a couple of additions to the basket - functionality should be unchanged.
If you like the changes, sign off :)
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Ok. Consistency welcomed!
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Liz [Thu, 6 Nov 2014 08:29:02 +0000 (08:29 +0000)]
Bug 13218: usability enhancements for z39.50 searches
This patch rearranges the layout of the z39.50 search pages in cataloguing and
authorities. There should be no functional change to z-target searching, all
functions should remain the same.
Changes:
* 2 columns of search fields condensed into one
* zTargets moved from below the search fields to beside them
* rearranged search fields into perceived frequency of usage, from most used to
least
* changed label of Raw (any) to Keyword (any)
To test:
* click cataloguing -> new from z39.50/SRU
* observe how the layout has changed
* import a record or two using the search - there has been no change to the
function, it should all be working.
* Click Authorities -> new from z39.50
* observe how the layout has changed
* import an authority or two using the search - there has been no change to the
function, it should all be working.
* sign off if you think these changes are nice. Comments and suggestions are
also welcome regarding this change.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Nice evolution of the z3950 search/result pages.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kyle M Hall [Fri, 12 Dec 2014 14:04:57 +0000 (09:04 -0500)]
Bug 13449 - Syndetics TOC will not display in some cases
For reasons unknown, the table of contents data from Syndetics will not
display if there is no p element, even though within that if for the p
element there's a second one for the p element! This is neither good nor
necessary.
Test Plan:
1) Enable Syndetics
2) Find a record that should have a Syndetics TOC but doesn't
3) Apply this patch
4) Reload the page
5) Note the Syndetics TOC data now displays
Signed-off-by: Julius Fleschner <julius.fleschner@briarcliff.edu> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I couldn't test but from reading the code this should not
have any negative consequences.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Mon, 8 Dec 2014 02:55:15 +0000 (03:55 +0100)]
Bug 13400: Untranslatable "Are you sure you want to delete this authority?"
This patch makes the string "Are you sure you want to delete this
authority?" translatable using the function _(...)
To test, apply patch and check that deleting authorities still works.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested successfully with the following procedure:
1. Applied the patch.
2. Ran perl translate update de-DE
3. Edited de-DE-i-staff-t-prog-v-3006000.po to add a "translation"
4. Removed "#, fuzzy" marker from po entry.
5. perl translate -v install de-DE
6. Testing deleting an authority from the authority search results page
and from the detail page. My translated string appeared correctly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Sun, 30 Nov 2014 19:57:07 +0000 (20:57 +0100)]
Bug 12084: Format planned date in publication details on detail page
If items are created for a serial subscription, the issue
information is shown on the details page in staff with the
planned date in ().
To test:
1) Create a subscription with items added on receive
2) Receive a few issues and create items
3) Check the staff detail page
4) Verify that the published date shows under Publication details
in the items table, but that the date is not formatted
5) Apply patch
6) Verify the date is now formatted according to the DateFormat
system preference setting
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Mon, 10 Nov 2014 08:55:52 +0000 (09:55 +0100)]
Bug 12059: Publisher column on invoice page always empty
This patch moves the publisher information out of its own
always empty column into the Summary column below the title,
as it is on other acq pages.
The information was never displaying, as publishercode is in
biblioitems and that table was not selected by GetInvoiceDetails.
Also modified the code to take into account that UNIMARC uses
biblioitems.publicationyear and MARC21/NORMARC use bibio.copyrightdate
for the copyright year.
To test:
- create an invoice for records that
- have a publication year
- have no publication year
- have a publisher...
- 'finish receiving' and check the invoice summary page
...acqui/invoice.pl?invoiceid=?
- Make sure all the information displays now but didn't witout the patch.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1/ Add a new suggestion, put some values for the price
2/ View the suggestion in the staff interface
2/ Switch the currency format
3/ Notice the format of the price does not change
4/ Apply patch
5/ Notice now the syspref is respected
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, thx!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Tue, 2 Dec 2014 01:16:40 +0000 (14:16 +1300)]
Bug 13368 Holds priority messed up on checkout
To Test
1/ Create 3 (or more holds) on one biblionumber, make sure at least
one item is not on loan
2/ Check out the not on loan item to a borrower (maybe number 2 in the
queue)
3/ Look in the database (or on the holds tab on the moredetail.pl)
notice the priorities have not been reordered
4/ Apply patch and try again, notice now they have
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Confirmed the problem without the patch, and confirmed that the patch
corrects it.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Marc Véron [Tue, 9 Dec 2014 04:21:06 +0000 (05:21 +0100)]
Bug 13410 - Untranslatable "Change messaging preferences to default for this category?"
To test:
In staff client, go to Home > Patrons
Click button "New patron" and choose a category
Change Patron messaging preferences
Now change Category
Make sure that following message box still appears: "Change messaging
preferences to default for this category?"
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mason James [Wed, 26 Nov 2014 00:51:45 +0000 (13:51 +1300)]
fix for 13331 [Bug 13331] Subfield does not show in cataloging editor - if subfield is disabled in OPAC/enabled in Staff, via frameworks
to test...
1/ attempt to add a new bib in the cataloguing editor, default framewok
- observe 245b subfield is visible in the editor, for tab 2
2/ uncheck the OPAC visibility for 245b, within the framework editor - then save
3/ repeat step 1/
- observe that the 245b subfield has disappeared from the cataloguing editor!
4/ apply patch,
5/ repeat step 1/
- observe that the 245b subfield now displays correctly in the cataloguing editor
note: this looks looks like a typo bug, that has been in koha for years
Signed-off-by: wajasu <matted@34813.mypacks.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13355: System preferences tab value wrong in templates
This patch fixes a bug on the system preferences tab templates.
To test:
To reproduce:
(1)
- Choose a tab on the sysprefs section (for example 'Enhanced Content')
- Right click on 'Enhanced Content preferences' title, and choose to 'inspect' the code
=> FAIL: you will see below the form tag something like:
<input type="hidden" name="op" value="save">
<input type="hidden" name="tab" value="">
(2)
- Do a syspref search (for example 'facet').
- Right click on one of the category titles (for example 'OPAC preferences')
=> FAIL: you will see below the form tag something like:
<input type="hidden" name="op" value="save">
<input type="hidden" name="tab" value="HASH(0x6e53050)">
- Apply the patch
- Repeat (1) and (2)
=> SUCCESS: you will see below the form tag something like:
<input type="hidden" name="tab" value="enhanced_content">
and
<input type="hidden" name="tab" value="opac">
respectively.
- Sign off :-D
Regards
Signed-off-by: wajasu <matted@34813.mypacks.net> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Sat, 29 Nov 2014 10:41:50 +0000 (11:41 +0100)]
Bug 10051: Separate first name and surname with comma in overdues report
The name of the patron who has overdues is displayed as
"surname first name" instead of "surname, first name".
To test:
- Go to circulation > overdues
- Verify that first name and surname are not separated by comma
- Apply patch
- Verify the display is improved with a comma
- Delete the first name from one of the patrons
- Verify display is still ok
Signed-off-by: David Roberts <david.roberts@ptfs-europe.com> Signed-off-by: Christopher Brannon <cbrannon@debian.localdomain> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13362: translate script creates dirs on update
A dir creation was uncommented (by me), the effect is
create a lang dir on 'update', which is no needed.
To test:
1) Update translation files for a uninstalled language
(cd misc/translator; ./translate update xx-YY)
2) Check new dirs
koha-tmpl/opac-tmpl/bootstrap/xx-YY/
koha-tmpl/intranet-tmpl/prog/xx-YY/
koha-tmpl/intranet-tmpl/prog/en/modules/help/xx-YY/
3) Clean all
git clean -f -d
4) Apply the patch
5) Repeat 1) (i.e. update)
6) Check no new dirs this time
Signed-off-by: Frederic Demians <f.demians@tamil.fr> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan, works as described.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Owen Leonard [Wed, 3 Dec 2014 13:36:04 +0000 (08:36 -0500)]
Bug 13375: Syspref search highlight styling broken in Chrome
This patch encloses the the syspref description/values mix in a <div>.
It doesn't introduce any regression on other browsers (like Firefox) and
has the side effect to make Chrome render the highlighted words on
syspref searches well.
This alternate patch uses a <div> instead of a <span> because it will
sometimes contain block-level elements. Follow the same plan:
To test:
- Search for 'facet' on the sysprefs
=> FAIL: verify it has styling problems in Chrome
- Apply the patch, reload
=> SUCCESS: styling is correct
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Tue, 16 Dec 2014 17:15:58 +0000 (17:15 +0000)]
BUG 13468: Overdue notice lists all checked out books
This patch should fix the issue when running under 'triggered' mode
To test:
1) Run overdue_notices.pl -t -n [to output notices to command
line]
2) Note that the notices output, list ALL checked out items
3) Apply Patch
4) Run again
5) Note the difference
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz> Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: remove space changes.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Mark Tompsett [Fri, 12 Dec 2014 16:51:38 +0000 (11:51 -0500)]
Bug 13451: Holidays.t assumes default data
This patch removes that assumption by expressly setting data
to be default.
TEST PLAN
---------
1) Ensure that branch code is NOT 'MPL' in the
repeatable_holidays table in your database.
2) Ensure that branch codes 'MPL' and 'CPL' do not exist
in the branches table in your database.
3) prove t/db_dependent/Holidays.t
-- this should bomb horribly.
4) Apply patch
5) prove t/db_dependent/Holidays.t
-- all tests should succeed.
6) run koha qa tests
Signed-off-by: Nick Clemens <nick@quecheelibrary.org> Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests pass without holidays in the calendar.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13398: rotating collections scripts are skipped on install
This patch makes the Makefile.PL script pick the rotating_collections/
directory for install.
To test:
- Run:
$ perl Makefile.PL
- Install using either 'standard' or 'single' method.
=> FAIL: Verify that there is no 'rotating_collections' directory
on the intranet CGI direcory.
- Apply the patch
- Run:
$ perl Makefile.PL
- Install using either 'standard' or 'single' method.
=> SUCCESS: Verify that there is a 'rotating_collections' directory
on the intranet CGI direcory.
- Sign off :-D
Regards
Tomas
PS1: Note that it should be enough to check for the rotating_collections files
on the generated Makefile after 'perl Makefile.PL'.
PS2: The packages use the 'standard' install method to generate the file tree.
So this patch should fix the packages too.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Wed, 10 Dec 2014 08:38:12 +0000 (09:38 +0100)]
Bug 13428: Fix regression on deleting facets
Test plan:
Search for something
click on a facet with diacritic
click on another facet
remove the facet with diacritic
Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Chris Cormack [Tue, 9 Dec 2014 23:47:30 +0000 (12:47 +1300)]
Bug 13425 - XSS in opac facets - Patch for master and 3.18
To Test
1/ Craft a url like /cgi-bin/koha/opac-search.pl?q=123&sort_by='"><script>prompt('Happy_Holidays')</script>&limit=123
It is important it must return results and facets
2/ Notice the js is executed
3/ Apply the patch test again
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Popup is gone after applying the patch. Facet link still shows it but does not execute. It's gone after clicking the link.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
<p>Thank you for visiting the <<branches.branchname>> of HMCPL.</p>
2) Check out some items to a patron
3) View the patrn's notices
4) Note the notice viewer is broken ( message is not collapsed, and
con't be collapsed ).
5) Apply this patch
6) Reload the page
7) Note the notice viewer is no longer broken
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This patch appears to fix the problem with the minimum required change.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 23 Sep 2014 10:39:55 +0000 (12:39 +0200)]
Bug 12852: C4::Bookseller should not be imported anymore
This script does not depend on C4::Bookseller anymore. The import can be
removed.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 9 Sep 2014 13:22:35 +0000 (15:22 +0200)]
Bug 12852: Some unused stuffs more
These parameters are never used.
GetBookSeller takes a string (bookseller name) in parameter, not an id!
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 29 Aug 2014 13:16:19 +0000 (15:16 +0200)]
Bug 12852: The "preview" param can be removed serials/claims.pl
This case (preview=1) never appened. This patch remove all occurrences
in the pl and the tt files.
Test plan:
Verify you don't manage to find a place where preview is set to 1 on the
claim serials page.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 23 Sep 2014 11:02:51 +0000 (13:02 +0200)]
Bug 12980: GetHistory does useless processing
GetHistory iterated on the orders to calculate the quantity and price.
These values are never used by the called.
It can be removed.
Test plan:
Verify there is no regression on acqui/histsearch.pl and
catalogue/detail.pl
Actually you just have to check that the total quantity and price are
not displayed on these views.
QA: note that 'count' and 'toggle' are never used in the template.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 26 Aug 2014 08:50:22 +0000 (10:50 +0200)]
Bug 12841: aqorders fields should not be mapped
Bug 5336 introduced some code which should have been introduced by bug
7294.
Since the idea behind bug 7294 has been abandoned (map the aqorders
fields), the code can be removed.
Test plan:
Verify that Koha does not allow you to map the aqorders fields with a
MARC subfield.
Verify there is no regression on adding/updating an order.
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Tue, 26 Aug 2014 10:46:52 +0000 (12:46 +0200)]
Bug 12839: aqbooksellers.gstreg is never used
The aqbooksellers.gstreg is never used in the code.
This patch does not remove the DB field but 3 useless occurrences in the
neworderempty page.
The both variable applygst and gstreg have never been took into account for prices calculation.
Test plan:
Verify there is no difference before and after the patch in the prices
calculation.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Robin Sheat [Wed, 3 Dec 2014 03:28:10 +0000 (16:28 +1300)]
Bug 13377: mark automatic_renewals.pl as executable
This script is called by a cron job, but was never marked as executable,
so will error every time it's called, which is no good. This also adds
an appropriate #! line to the top of the file.
To test:
* apply the patch
* make a package
* ensure that the installed
/usr/share/koha/bin/cronjobs/automatic_renewals.pl
is mode 755 and does something when run.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Katrin Fischer [Mon, 10 Nov 2014 21:30:16 +0000 (22:30 +0100)]
Bug 12567: Make catalog statistics wizard publication year work for MARC21
Publication year was useless for MARC21, as it was using the
biblioitems.publicationyear (UNIMARC) instead of biblio.copyrightdate
(MARC21).
This patch tries to fix the search options to work for both MARC
flavours.
To test:
In Reports > Statistics wizards > Catalog:
- Test the publication year search options on a UNIMARC and
a MARC21 installation.
- Make sure search results make sense for both.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The changes are fine with me, but this script is certainly not bug free.
Also note that all its SQL should be moved out according to our
coding guidelines. When doing so, a rewrite would be appropriate.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13214 - Improve performance of acqui/addorderiso2709.pl, stop fetching all import_records needlessly
TEST PLAN:
1. Load 167 staged files to Koha.
2. Try to make an acquisiton from a staged file.
3. Wait 16s for the acqui/addorderiso2709.pl -view to load.
AFTER PATCH:
1. Load 167 staged files to Koha.
2. Try to make an acquisiton from a staged file.
3. Wait 1.6s for the acqui/addorderiso2709.pl -view to load.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Thu, 27 Nov 2014 15:31:24 +0000 (15:31 +0000)]
Bug 9165: (Followup) Tidied code slightly
Minor code tidy to clean up qa script warning.
http://bugs.koha-community.org/show_bug.cgi?id=9165 Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Mon, 24 Nov 2014 16:27:41 +0000 (16:27 +0000)]
Bug 9165: (Followup) Clear existing sync
A small enhancement to clear existing synced passowrd should this
config option be enbled. This followup is related to bug 12831
http://bugs.koha-community.org/show_bug.cgi?id=9165 Signed-off-by: Robin Sheat <robin@catalyst.net.nz> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Robin Sheat [Thu, 29 Nov 2012 01:25:30 +0000 (14:25 +1300)]
Bug 9165: Prevent LDAP passwords being stored locally
This adds a configuration option to LDAP that prevents it from storing
user's passwords in the local database. This is useful when users of
hosted Koha wish to prevent any form of offsite password storage for
security reasons.
Notes:
* if the option is not included in the koha-conf.xml file, then the
current default behaviour of saving the password locally is retained.
* this has no impact on passwords that are already in the database.
They will not be erased.
To use:
* edit the koha-conf.xml for a system that uses LDAP for
authentication.
* in the <ldapserver> configuration, add:
<update_password>0</update_password>
* feel a greater sense of security.
To test:
1) have a Koha system that authenticates using LDAP.
2) note that when a user logs in, their password is saved (hashed) in
the database.
2.5) it is important to note that, for whatever reason, a user's
password is not stored on a login where their account is created,
only when they log in after being created. Thus perhaps log in and
log out a couple of times to be sure.
3) add the <update_password>0</update_password> option to the
<ldapserver> section of koha-conf.xml.
4) login with a new user (or erase the password from the database for
an existing user) and note that the password field is not populated.
5) log out and log back in just to be sure, check the password field
again.
Sponsored-By: National Institute of Water and Atmospheric Research (NIWA) Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Martin Renvoize [Mon, 24 Nov 2014 16:07:58 +0000 (16:07 +0000)]
Bug 12831: Local Only logins with LDAP
Local only logins should continue to function when LDAP is enabled.
This was not the case after bug 8148 [LDAP Auth should FAIL when ldap
contains a NEW password]. For this case, we need to diferentiate
between local accounts and ldap accounts. This is somewhat challenging
and thus this patch is only part of the story.
The other half can be achieved with bug 9165
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Julian Maurice <julian.maurice@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
checkpw_ldap should return 0 if it is not an anonymous bind, and authentication
fails. This is better explained on the bug comments. This is just a regression
test for the revised functionality.
To test:
- Run
$ prove t/db_dependent/Auth_with_ldap.t
=> FAIL: it fails because C4::Auth_with_ldap doesn't match the expected behaviour
- Apply the bugfix from Martin
- Run
$ prove t/db_dependent/Auth_with_ldap.t
=> SUCCESS: tests now pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 21 Nov 2014 15:13:41 +0000 (16:13 +0100)]
Bug 13215: (follow-up) Fix notice edition
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 21 Nov 2014 09:28:02 +0000 (10:28 +0100)]
Bug 13215: Fix notice deletion
This patch could have only been
- name => $values[0]->{name},
+ name => $letter->{name},
Other changes are just indentation and variable names (send an hashref
$letter to the template and use the Branches TT plugin to display the
branch name)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Fri, 21 Nov 2014 09:24:07 +0000 (10:24 +0100)]
Bug 13215: Fix notice edition
C4::Letters::getletter does not set mtt in value ( i.e. { email => "my
email notice} ) at the contrary of the get_letter routine defined in
tools/letters.pl.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Jonathan Druart [Thu, 6 Nov 2014 15:02:08 +0000 (16:02 +0100)]
Bug 13215: The same letter code can be used for several libraries
This patch fixes a major issue introduced by the
commit 5c4fdcf Bug 11742: A letter code should be unique.
The interface should let the possibility to create a default template
letter and some specific ones, with the same letter code (letter.code).
The patches submitted on bug 11742 tried to fix an issue based on a
(very bad) assumption: letter.code should be considered as a primary key and
should be uniq.
This patch reintroduces this behavior.
Note that the interface will block a letter code used in different
module (this is consistent not to have the same letter code used for different
needs).
This patch is absolutely not perfect, it just tries to change as less
change as possible and to use new tested subroutines.
Test plan:
1/ Verify that the problem raised on bug 11742 does not appears anymore.
2/ Verify there are no regression on adding, editing, copying, deleting
letters.
3/ Verify you are allowed to create a default letter template with a letter
code and to reuse for a specific letter (i.e. for a given library).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Liz Rea [Mon, 6 Oct 2014 20:35:19 +0000 (09:35 +1300)]
Bug 12856: koha-disable fails without disabling site
To test:
Package up a branch with this patch
install that package
create a site - sudo koha-create --create-db testdisable
enable a site - sudo koha-enable testdisable
check it's enabled - sudo koha-list --enabled
* it should show up
disable a site - sudo koha-disable testdisable
Do this for both debian squeeze/wheezy and ubuntu 12.04 and 14.04, if you can. I'd like to see a sign off from a debian (sq/wh)eez(e/y) or ubuntu 12 user, because I could only test reliably on ubuntu 14.04.
* make sure apache restarts and no errors are produced
check it's disabled - sudo koha-list --enabled
* it should not show up
check the site is still there - sudo koha-list
* it should still be there
check that the config file has the Include for disabling uncommented
* the line Include /etc/koha/apache-shared-disable.conf should not have a # in front.
Re-enable the site - sudo koha-enable testdisable
* the line Include /etc/koha/apache-shared-disable.conf should have a # in front.
And the final question - does the site work? All other functions unchanged?
Signed-off-by: Mason James <mtj@kohaaloha.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected. code reads better too.
Edit: I added a missing space in one line.
projects / koha.git / log