Bug 30231: (bug 5927 follow-up) See (rejected) forms of series entry visible in search result (OPAC and intra)
When using zebra with IncludeSeeFromInSearches on, with traced series, the rejected
forms (4XX) of series entries are visible in result lists, both in OPAC and intra
interfaces.
Test plan:
=========
1. Have a MARC 21 installation with zebra, and with IncludeSeeFromInSearches on.
Have an authority records for series (130, or 100/110/111 with
title) with rejected forms (4XX fields). So the auth record should
contain at least:
130 _0 $a Series title
430 _0 $a Some other title under which the series in known
Use (each) authority record in at least two biblio records (in appropriate
fields, i.e. 800/810/811/830 or even deprecated 440, if it makes use
of UNIF_TITLE).
Don't forget to properly input also 490 (for 8XX). So the biblio record
shold contain at least:
245 nn $a Work title.
490 1_ $a Series title
830 _0 $a Series entry $9 <koha_id>
Reindex.
2. Perform a simple biblio search (in OPAC and in intra) with the title
from auth record.
3. You shold get a list of results. See the Series information--you
shold see not only the accepted entry from 1XX in auth but also the
rejected forms from 4XX.
4. Apply the patch.
5. Repeat 3. You shold see only the entry form of series now.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3f90b7b43d0ed927ddac92af5be226d1ede6429f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 12 Aug 2022 16:19:49 +0000 (16:19 +0000)]
Bug 31356: Use hold expiration date instead of adding days to the waiting date
The Talking Tech outbound script currently just adds the
ReservesMaxPickUpDelay to the waiting date to calculate the
"expiration date", but it should use the actual hold expiration
date which may differ from this naive calculation based on
various system preference values.
Test Plan:
1) Create a holiday for tomorrow
2) Set ReservesMaxPickUpDelay to 5
3) Set "Days mode" to "Same week day"
4) Enable ExcludeHolidaysFromMaxPickUpDelay
5) Enable TalkingTechItivaPhoneNotification
6) Create a hold and fill the hold so it is waiting
7) Enable "Hold filled" phone notices for that patron
8) Create a 'phone' version of the HOLD notice
9) Run ./misc/cronjobs/thirdparty/TalkingTech_itiva_outbound.pl --type RESERVE -w 0
10) Note the output has the expiration date ( 15th colume ) 5 days from now which is *not* the hold's expiration date
11) Apply this patch
12) Repeat the command from step 9
13) Note the expiration date column now matches the holds actual expiration date!
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f6a08737c9ad9c85e98887e3a55cf31029c5a8c8)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31177: Fix misplaced import in C4::ILSDI::Services
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cb2fd089af2756c91a4839ca23bb6e8c7356a41b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
David Cook [Thu, 10 Mar 2022 04:02:49 +0000 (04:02 +0000)]
Bug 30262: Trim whitespace off tracklinks.pl URLs
This patch trims whitespace off tracklinks.pl URLs so that
the URL is in the same format as the URLs returned by
C4::Biblio::GetMarcUrls, which is used by tracklinks.pl internally.
Test plan:
0. Apply patch and koha-plack --restart kohadev
1. Go to http://localhost:8081/cgi-bin/koha/cataloguing/addbiblio.pl?biblionumber=29
2. Add a 856 with $u of 'https://koha-community.org ' (note the space at the end0
3. Save record
4. Change 'TrackClicks' syspref to 'Track'
5. Go to http://localhost:8080/cgi-bin/koha/opac-detail.pl?biblionumber=29
6. Click on the online resource (eg
http://localhost:8080/cgi-bin/koha/tracklinks.pl?uri=https%3A%2F%2Fkoha-community.org%20&biblionumber=29
)
7. Note you are redirected to https://koha-community.org
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Added the link with a space at the end. Verified that without the
patch, clickin on "Click here to access online" gives a 404. After
applying the patch the redirect works as expected.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5fe49c7db1113026d242ad081c6b100fc8bae76e)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31489: Typo in EnableExpiredPasswordReset description
This patch corrects a typo in the EnableExpiredPasswordReset system preference description.
To test:
1) Apply patch
2) Go to Administration > Global system preferences
3) Search for EnableExpiredPasswordReset
4) Read the description and make sure there are no errors.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b715ea28b15ae689571cda0535bd3dac467099bd)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Wed, 17 Aug 2022 06:09:32 +0000 (20:09 -1000)]
Bug 31379: Change results per page text for default
Since Bug 14715, one can change number of results per page.
The actual text in combobox for default value is : "Library default:
20"
This text is hard to translate correctly.
For example french translation use "site par défaut" wrongly meaning
"default library".
I propose to simply use "20 (defaut)".
Test plan :
1) Go to system preferences and set both 'numSearchResultsDropdown' and
'OPACnumSearchResultsDropdown' to 'Show'
2) Do a catalogue search in the intranet using a search term that will
bring lots of results
3) Look at restults per page combobox
4) Same for OPAC
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 29ad53a682f339a6d9fea028b1951898c6dff662)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle M Hall [Wed, 24 Aug 2022 17:10:18 +0000 (17:10 +0000)]
Bug 31112: (QA follow-up) Reduce database queries
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 73c3c5d2f10751c23156372300239d42e5957c66)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Joonas Kylmälä [Mon, 22 Aug 2022 19:02:14 +0000 (19:02 +0000)]
Bug 31112: (follow-up) Don't return "on_reserve" when there are 0 possible holds
It's possible that there could be 0 possible reserves, for example
when the hold has already been filled, thus the check would fail as
the item count can never be less than 0.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 507edad61f16d99d4fba4ce343cbaa6eb3950957)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Joonas Kylmälä [Mon, 22 Aug 2022 19:02:03 +0000 (19:02 +0000)]
Bug 31112: (follow-up) Bring back the check for non-priority holds
Before the changes from bug 31112 when CheckReserves returned a
non-priority hold we didn't return "on_reserve" status but checked in
addition to that whether there are any priority holds and if there
were, only then we returned the "on_reserve" error.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8ad992630181413d3be9935309b61d50d2e3a951)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 19 Aug 2022 13:23:05 +0000 (13:23 +0000)]
Bug 31112: (QA follow-up) Fetch patrons with reserves
Previously we fetched all in a single call using biblionumbers
Fetching each individually could be a performance hit on systems
with large numbers of holds
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2eb053603d9df3b03f4ee0ec54f84a697aab8716)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 19 Aug 2022 13:11:09 +0000 (13:11 +0000)]
Bug 31112: (QA follow-up) Restore check to avoid extra processing
We now count all holds for all patrons, we can still eject if we have more
holds than we do items
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4676ce1a03fee089c4aa51a49ecc646afb91450a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31112: CanBookBeRenewed: take into account patrons with more than 1 hold to a biblio
If a single patron had more than 1 hold to a biblio and there was only one
available item we allowed incorrectly renewing the checkout when
AllowRenewalIfOtherItemsAvailable was set to "Allow". This
changes CanBookBeRenewed so that it makes sure all the holds are
filled and not just one per patron.
To test:
1) prove t/db_dependent/Circulation.t
2) (Optional, as unit test is provided)
- Set AllowRenewalIfOtherItemsAvailable = Allow
- Create biblio with three items
- Checkout one item to patron A
- Add two biblio-level holds for patron B
- Try to renew patron A's checkout with and without this patch.
- Notice that without this patch the renewal succeeds even though we
one unfilled hold left. After applying the patch the renewal should
fail.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 15f622ecc1b3d425bf460527398975447cbee62e)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1) Please check manually that the logic stays the same, use git's -w command line parameter to
ignore whitespace changes in the diff output.
2) prove t/db_dependent/Circulation.t
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8ba1a9a5345310c54d9225049d470544b56eeb11)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Thu, 27 Oct 2022 08:53:06 +0000 (10:53 +0200)]
Bug 32011: 2FA - Prevent qr_code to not be generated
Caught by selenium/authentication_2fa.t
# Failed test 'Enforce 2FA setup on first login'
# at t/db_dependent/selenium/authentication_2fa.t line 291.Error while executing command: unexpected alert open: Dismissed user prompt dialog: [object Object] at /usr/share/perl5/Selenium/Remote/Driver.pm line 411.
at /usr/share/perl5/Selenium/Remote/Driver.pm line 356.
There is a 500 in the logs:
"POST /api/v1/app.pl/api/v1/auth/two-factor/registration HTTP/1.1" 500
That is caused by
[ERROR] POST /api/v1/auth/two-factor/registration: unhandled exception (Mojo::Exception)<<Overflow error. version 8
total bits: 1268 max bits: 1232>>
It's coming from GD::Barcode, in my understanding we should increase 'Version'.
Test plan:
Remove all other subtests from the selenium to speed up its exec, then
run it in a loop. Without this patch the tests fail quite often (1/10),
now it should not fail with this error (maybe another one, see bug
32010)
Lucas Gass [Tue, 18 Oct 2022 20:53:03 +0000 (20:53 +0000)]
Bug 31863: Account for changelanguage element when adjusting editor height
To test:
1. Turn on 'EnableAdvancedCatalogingEditor'
2. Go to a record with enough MARC data that it should take up the entire width of your screen,
3. The CodeMirror editor will only be 300px.
4. Resize your screen, nothing happens to the editor height
5. Apply patch
6. Look at the same record in your editor, the editor should go to the bottom of the page now. Resizing your screen should resize the editor.
7. Have some additional language packs installed, and change the language system pref so the '#changelanguage' option will appear.
8. Make sure the editor height is still being properly set.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 9bee75e107178e4ca907cc3a8c7399f3a128fbe6)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Thu, 27 Oct 2022 10:39:20 +0000 (12:39 +0200)]
Bug 31421: Add tests
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f2519aec6fa2a3af0957faa60b7764471fa1305f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 20 Oct 2022 14:13:37 +0000 (14:13 +0000)]
Bug 31421: Add a limited option to template plugin
This adds a specific 'limited' routine to the Categories plugin, and uses
it for the new patron dropdowns
To test:
1 - Limit a patron category to some branches
2 - Sign in not at one of those
3 - Confirm the new patron dropdowns don't include the category
Bug 31421: (follow-up) Add POD
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 1fc56e0e47d07d2eadcdb62c6a5740aa9d51c6b2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Thu, 6 Oct 2022 19:13:10 +0000 (19:13 +0000)]
Bug 31421: Do not apply library limits to Categories plugin
This patch simply changes from using 'search_with_library_limits'
to 'search'
The limits I think are intended to prevent users from setting a patron to the wrong category,
they are not meant to hide patrons. Or rather, they don't do that, patrons are returned in search
but cannot be processed. The dropdowns as well won't contain the category, so you can see these
patrons, but not filter by the category
Bug 31422 and bug 31032 point out further issues with limits.
For now, let's fix searching
To test:
1 - Edit Patron category 'Patron/PT'
2 - Try to do a patron search that returns patrons in this category
3 - See 'Processing' and error in JS console: Uncaught TypeError: categories_map[data] is undefined
4 - Apply patch
5 - Restart all and repeate
6 - It works now!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 29754226ea3b6bdaf896e5b8d19f44b1ed551e11)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Mon, 25 Jul 2022 07:23:25 +0000 (09:23 +0200)]
Bug 31219: Prevent JS injection in patron extended attributes
We are sanitizing other attributes but "extended patron attributes".
Test plan:
Make a patron attribute editable at the OPAC
Edit an existing patron, or register a new one
Use a script tag in the new value ("<script>alert("booh!")</script>" for
instance)
With this patch the value is remove if containing an HTML tag that is
not br b i em big small strong (see C4::Scrubber)
Signed-off-by: Mark Hofstetter <koha@trust-box.at> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
David Cook [Fri, 24 Jun 2022 01:42:52 +0000 (01:42 +0000)]
Bug 31033: Explicitly define max child processes for SIP server
By default, the SIP server appears to only use 1 child process for
responding to SIP connections.
This change makes this explicit in the configuration, which should
make it so that people who need more than 1 simultaneous SIP connection
can know to just increase the value for the "max_servers" parameter
in the SIPconfig.xml file.
Test plan:
1. Add "max_servers='1'" to your SIP configuration file
2. koha-sip --restart kohadev
3. Open 3 terminals
4. Run "telnet localhost 6001" on 2 terminals
5. On the 3rd terminal, run the following:
ss -l -n -t
ps -efww | grep "sip"
6. Note that there are 2 processes called
kohadev-koha-sip: perl /kohadevbox/koha/C4/SIP/SIPServer.pm /etc/koha/sites/kohadev/SIPconfig.xml
One of these processes is the parent of the other
7. The Recv-Q in the "ss" output should show 1
(This means that 1 of your telnet connections is in the server's TCP backlog)
8. Celebrate as the configuration works as expected
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4a6567274d944814c432ab7b3697c545e1459800)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle M Hall [Wed, 13 Jul 2022 14:31:09 +0000 (14:31 +0000)]
Bug 12225: Use ProcessOfflineIssue
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3b0bc03ad46e82d2d813227f46d6e7420bd6c189)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle Hall [Tue, 23 Aug 2022 16:15:09 +0000 (12:15 -0400)]
Bug 12225: Add unit tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit df22b78f5363646f87bead92ede4a3e986b94d34)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle Hall [Tue, 12 Jul 2022 11:46:31 +0000 (07:46 -0400)]
Bug 12225: Re-implement no block flag for checkouts
Test Plan ( assuming Koha Testing Docker or kohadevbox ):
1) Check out master
2) Start the SIP server ( edit the SIP config koha instutution to be
"CPL" instead of "kohalibrary" )
3) Telnet to 6001
4) Send 9300CNkoha|COkoha|CPCPL|
5) Send 11YY20220711 16350220250711 163502AOCPL|AA23529000035676|AB39999000001396|ACkoha|BON|BIN|
6) Note the due date for the checkout in Koha is not in the year 2025:
Henry Acevedo (23529000035676) checked out Philippics. by Cicero, Marcus Tullius. 39999000001396
7) Apply this patch set
8) Restart all the things!
9) Check in the checkout
10) Repeat steps 3 through 5
11) Note the due date is now in 2025!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 51eb6e65540e0440a28c80343319a8a895d509df)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle M Hall [Mon, 11 Jul 2022 16:57:06 +0000 (16:57 +0000)]
Bug 12225: Fix SIP message templates
If a renewal via SIP would produce an error due to being on reserve, or
exceeding maximum renewals, Koha's SIP2 implementation will refuse to
renew the item even if the "no block" flag is set to Y.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 7a4afce04d36d7452d2065a82ce0899ab0047126)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Wed, 17 Aug 2022 17:09:44 +0000 (17:09 +0000)]
Bug 31387: Fix othernames required label
1. Mark othernames as required via PatronSelfRegistrationBorrowerMandatoryField
2. Go to the self-reg form, the field is required but the span that makes it look required stays hidden. (<div class="required_label required">Required</div>)
3. Mark initials as required via PatronSelfRegistrationBorrowerMandatoryField.
4. Now the label_required field appears for othernames in the self ref form
5. Apply patch
6. Try again, the label should now properly show when othernames is marked as required
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 37002a81c37e759bf80e663d3e75ce7c0700feef)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
David Cook [Fri, 12 Aug 2022 02:27:52 +0000 (02:27 +0000)]
Bug 31348: Make koha-plack stop gracefully
0. Apply patch
1. cp /usr/sbin/koha-plack /usr/sbin/koha-plack.bak
2. cp debian/scripts/koha-plack /usr/sbin/koha-plack
3. Now at roughly the same time do the following two actions:
3a. Go to http://localhost:8081/cgi-bin/koha/about.pl
3b. koha-plack --stop kohadev
4. Note that the HTTP request completes
5. Click on "Home"
6. Note that the error is "Service Unavailable" rather than "Proxy Error",
which would've occurred with an interrupted HTTP request/response
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5155e43b04a4283bb13eedd39cdcb9e12693630d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
David Cook [Thu, 18 Aug 2022 01:14:03 +0000 (01:14 +0000)]
Bug 31390: Remove noisy warns in C4::Templates
This patch removes two noisy warnings from C4::Templates
0) Apply patch and koha-plack --restart kohadev
1) Go to http://localhost:8081/
2) Note no warnings in /var/log/koha/kohadev/plack-intranet-error.log
3) Go to http://localhost:8080/
3) Note no warnings in /var/log/koha/kohadev/plack-opac-error.log
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 368b1462e58f02e9636bb9ce5a5ba70a54b5d353)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 5 Oct 2022 10:16:02 +0000 (10:16 +0000)]
Bug 31673: (bug 31086 follow-up) Drop and constraint to allow updating column
It seems that we cannot edit the column while it has a constraint.
If we remove it, update the oclumn, then re-add it, the update succeeds
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 0bd87ce0642e873c98b5ca8fe1a0f92aeef7511a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31351: (QA follow-up) Extend the encode/decode test
Adding some Unicode stuff.
And missing txn couple.
Test plan:
Run t/db_dependent/Koha/BackgroundJob.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 99b15ee5df0e3c91f74dbb05a6b5424297caf62b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
Run t/db_dependent/Koha/BackgroundJob.t
Run t/db_dependent/Koha/BackgroundJobs.t
Prove t/db_dependent/Koha/BackgroundJobs
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 727193deade2795db350b84bec0ca2e28163124a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31351: (QA follow-up) Use $self->json in Background modules
Making the disabling utf8 flag explicit instead of depending on
the default of the CPAN module.
Incorporating the change in background_jobs_worker too.
Test plan:
See next patches when we look at unit tests.
Restart koha-worker.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 202db89f83bdc9b6a72ebaa90f00898698856ee8)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31351: Koha::BackgroundJob: Let database connection object handle utf8 transcoding
Our database connections have been set up so that they will
automatically convert perl encoded strings to utf8 encoded strings
when sending data to database tables and decode the utf8 encoded
strings from the tables back to internal perl strings. As we can see
from a call in Koha/BackgroundJob.pm we are encoding the perl internal
string to utf8 and then decoding it back to perl internal string:
my $data_dump = decode_json encode_utf8 $self->data;
We can skip this unnecessary encode<->decode step (as the database
object has done the decoding for us) by simply calling the
JSON->new->decode() method which doesn't perform any string decoding.
Furthermore, the original code was buggy and didn't always remember to
encode the unencoded strings, in Koha::BackgroundJob::process we can
see
my $context = decode_json($self->context);
is missing the encode step. Now after this change encoding before
decoding is not necessary as we are using the methods from the JSON
module that do not perform any transcoding.
Note to those concerned whether the old data in the database is
compatible with this new code:
Luckily our database connection object seems to be smart and
didn't utf8 encode the utf8 returned data from the old encode_json()
calls (probably checks the utf8 flag for the string (Encode::is_utf8($str))).
To test whether this fixes the original bug reported of not being able
to schedule background jobs with koha user having non-ASCII letters in
their surname:
1) Change your staff users surname/lastname to "ääää"
2) Log out and back in.
3) Go to a biblio record detail page and click "Select all" in the
items table
4) Click Delete selected items and proceed with the deletion
5) Notice the batch item deletion job has failed status
6) Apply patch and repeat but this time the deletion job should finish.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d95805c6aacc28490c17b42d22277e966f1292c1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 12 Aug 2022 15:51:13 +0000 (15:51 +0000)]
Bug 31355: Add paging = false to items table on opac-reserve
Moving to an ajax datatable and paging would be a future fix, this restores
lost functionality
To test:
1 - Find or create a title with 20 items
2 - Place a hold in opac
3 - Attempt to select a specific item
4 - Note only 10 show
5 - Apply patch
6 - All items show
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 20108c837e639ce9fa4e2401a61779865bc942d1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Owen Leonard [Fri, 19 Aug 2022 18:00:37 +0000 (18:00 +0000)]
Bug 31425: Minor correction to patron categories admin title
This patch corrects the patron categories administration template so
that an extra angle bracket isn't included in the page title on the main
view.
To test, apply the patch and go to Administration -> Patron categories.
The page title should read:
Patron categories › Administration › Koha
...with no extra "›" at the beginning.
Check that other views (new, edit, delete) are unaffected.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 9c11c588c11bf50888796a6d1fe175a2ddc853bd)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Alex Buckley [Tue, 16 Aug 2022 01:10:43 +0000 (13:10 +1200)]
Bug 31352: Change 'Borrower name' to 'Patron name'
Test plan:
1. Go to Tools > Patron card creator > New > Card batch
2. Enter a borrowernumber and click 'Add patron(s)'
3. Observe a table with the leftmost column name 'Borrower name' loads
4. Apply patch
5. Refresh page
6. Observe the leftmost column name is 'Patron name'
Sponsored-by: Catalyst IT, New Zealand Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d128466dac1711e28f30b556f000f3ae0173bb4b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 1 Jul 2022 11:08:57 +0000 (11:08 +0000)]
Bug 31076: Handle year limits with equal sign or colon
To test:
1 - Enable ES and index
2 - Set expandedSearchOption to 'show'
3 - Advanced search on staff and opac using Year field on staff and Publication date range on OPAC for:
2005
2005-
-2005
<2005
>2005
2005-2010
4 - Confirm ranges don't work on staff side, but do on opac
5 - Apply patch
6 - Repeat searches - they work on both staff and opac
7 - prove t/db_dependent/Koha/SearchEngine/Elasticsearch/QueryBuilder.t
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit a11633379f8d9f6a933da7fa887b2e7966e3765a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Fri, 24 Jun 2022 07:38:11 +0000 (21:38 -1000)]
Bug 28327: (follow-up) Comma as default CSV delimiter
Looks like most of existing code wants comma as default value.
Also impact installer/data/mysql/mandatory/sysprefs.sql.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 7b645b0208182520d91ff370b6a4e5b79549d2e0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Wed, 12 May 2021 10:00:31 +0000 (12:00 +0200)]
Bug 28327: Unify CSV delimiter special behavior for tabulation
System preference 'CSVdelimiter' has a special case for tabulation.
Preference value contains string 'tabulation' but string '\t' must be used in CSV file.
This is OK in many places, for exemple Bug 17590.
This patch adds C4::Context->csv_delimiter to add a uniq metod dealing
with this behavior.
Also create Koha::Template::Plugin::Koha->CSVDelimiter for calls from
Toolkit Templates.
Test plan :
1) Set system preference 'CSVdelimiter' = 'tabs'.
2) Create CSV export in impacted pages
3) Check columns are separated by tabulation character and not string 'tabulation'
4) Check with another delimiter
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 381b79593e2a86c4d856242a1f6e955d95ae1f24)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Fridolin Somers [Tue, 22 Mar 2022 07:48:50 +0000 (21:48 -1000)]
Bug 28327: Add unit tests
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit a2e9b440742bb3e207d1906d3c478b936eb277f2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31282: Fix broken characters in patron_emailer.pl verbose mode
To test:
1. Have a report containing:
SELECT tomascohen@theke.io;
2. Have a members notice containing ¡ and other non-ASCII characters.
3. Run (changing the report number and notice code accordingly):
$ kshell
k$ perl misc/cronjobs/patron_emailer.pl --report 4 \
--notice BIRTHDAY --from tomascohen@theke.io --module members
=> FAIL: non-ASCII characters are broken
4. Apply this patch
5. Repeat 3
=> SUCCESS: Things print correctly!
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 9afbe872b7e63ce1d88cf6896df3b1046529212b)
This made the affected test fail consistently on those versions.
This trick for checking OpacHiddenItems is correct (as introduced on bug
28125 doesn't really make use of the warning, just prints it in
about.pl) so one option was to just check for a warning.
I decided to keep the test, but add the optional DECIMAL|DOUBLE check on
the qr. This way other eventual changes will make it fail and serve as a
warning in case something more relevant changes.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ t/db_dependent/Koha/Items.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Nick Clemens [Wed, 17 Aug 2022 11:56:37 +0000 (11:56 +0000)]
Bug 30779: Remove _update_import_record_marc and update tests
This patch removes the now unused: _update_import_record_marc
Additionally, as items are already present in import biblio we no longer need to embed
them, so that parameter is removed and the option removed from the sub and pod and everywhere
it was used
In all cases, we were embedding, so we don't need a way to get without
Tests updated
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b02b66acf5ddac1af00215fbcc1d842777b67c3b)
Nick Clemens [Mon, 16 May 2022 19:57:23 +0000 (19:57 +0000)]
Bug 30779: Do not update import marc after importing items
We are stripping the marc item tags at import - we save them when not importing items, but
strip when importing items
I think we can save on writes by leaving them in the record. This also allows comparison to what was staged
versus items created
To test:
1 - Stage a marc record with items, but do not look for items
2 - Confirm the item tags remain in staged marc
3 - Import the record
4 - Confirm items are nto in imported marc record
5 - Stage the record again, but look for items
6 - Confirm the item tags are stipped from imported record
7 - Import and confirm imported record has no item tags
8 - Apply patch and repeat 1-5
9 - Confirm item tags remain in record
10 - Import and confirm item tags not in imported marc
Signed-off-by: Andrew <andrewfh@dubcolib.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b1ec071866de33ef0eb37cc74b62c8ed77d6afad)
3. Open a "Incognito" window in your browser (recommended to use Google
Chrome to test this)
4. View the biblio detail page in the OPAC. Observe a 'Coce image from
Amazon' box loads with a spinner
5. Apply patch and restart services
6. Clear your browser cache
7. Reload the same biblio detail page in the OPAC. Observe no image is
displayed.
8. View another OPAC biblio detail page that does have a successfully
loading coce image and confirm the source of that image is listed: For
example 'Coce image from Amazon.com' is displayed
Sponsored-by: Toi Ohomai Institute of Technology, New Zealand Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cbe50d798a42b65d4439d30df6bbf2ab6623bbcd)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 17 Aug 2022 11:09:14 +0000 (11:09 +0000)]
Bug 31382: Pass password_has_expired param to templte
This patch restores the param, while still leaving the check against invalid
login credentials to ensure we don't leak information.
To test:
1 - enable EnableExpiredPasswordReset
2 - Edit a patron to set password to expire in the past
3 - Attempt opac login as patron
4 - It fails, but you are redirected to login screen with no info
5 - Apply patch
6 - Attempt login
7 - You are notified password expired and given reset link
8 - Go back to login screen
9 - Login with correct username,, wrong password
10 - You are notified of incorrect credentials, not password expiration
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 218419ce2c2502bcad0f8285173b4493d7e9e8fc)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Fri, 22 Jul 2022 14:47:36 +0000 (14:47 +0000)]
Bug 31222: Reduce query size for batchMod
The object search is currently:
Koha::Items->search({ barcode => \@contentlist }
Which generate code like:
barcode = 1 OR barcode = 2 OR barcode = 3 ....
This can get quite large
We can reduce the query size by using -in:
Koha::Items->search({ barcode => { -in => \@contentlist } }
Which generates code like:
barcode in ( 1, 2, 3 )
To test:
1 - Apply patch
2 - Perform batch modifications
3 - Confirm nothing has changed
Signed-off-by: Rachael Laritz <rachael.laritz@inlibro.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 7343e404b7b486c52a150613f308e452f4f5da05)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Tue, 16 Aug 2022 12:02:13 +0000 (12:02 +0000)]
Bug 29782: Fix handling records without title or content
Test plan:
Save a new record with only a title in the non-default tab (english).
Check if you see it on the list. Edit.
Save a new record without title but only content in non-default lang.
Check if you see it.
Do the same 2 edits on the default tab only. Verify too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 89e65657b106570b717dede6476a6d6f65511b67)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Alex Buckley [Wed, 10 Aug 2022 15:32:24 +0000 (15:32 +0000)]
Bug 31228: Intranet coce.js is not hiding the coce-coverimg div for single-pixel image
This is because the intranet detail.tt has coce-coverimg as an ID.
Intranet results.tt has coce-coverimg as a class. Intranet coce.js
targets coce-coverimg as a class.
Intranet detail.tt should be changed to have coce-coverimg as a class.
This is inline with the change made to the OPAC in bug 31217
Test plan:
1. Set your system preferences:
- CoceHost = https://coce.mykoha.co.nz
- CoceProviders = Select all
- IntranetCoce = Enable
3. Open a "Incognito" window in your browser (recommended to use Google
Chrome to test this)
4. View the biblio detail page in the intranet. Observe a 'Coce image
from Amazon' box loads with a spinner
5. Apply patch and restart services
6. Clear your browser cache
7. Reload the same biblio detail page in the intranet. Observe no image
is displayed.
8. Do an intranet search to get the biblio returned in search results
page. Confirm no cover image box is displayed
9. View the intranet search result and detail pages for a different
biblio that you know Coce should be displaying the cover image of and
confirm that it is correctly displayed with the source of that image
listed: For example 'Coce image from Amazon.com' is displayed
Sponsored-by: Catalyst IT, New Zealand Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit daef044b6f876ea2555c4520e6c91319d2760d25)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Thu, 7 Jan 2021 12:44:33 +0000 (13:44 +0100)]
Bug 19540: Tell the patron why a hold cannot be placed on items
This patch adds an explanation when a hold cannot be placed, in some situation:
tooManyReserves
tooManyHoldsForThisRecord
tooManyReservesToday
itemAlreadyOnHold
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 01985605434b7b78cb8f234f8ea66e0a16b3f8c5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Mon, 16 May 2022 19:37:59 +0000 (19:37 +0000)]
Bug 26632: Remove two more occurrences
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 089f5a4cf5c0ec2ae68aef9d5f3aaef47e19ad5c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Mon, 16 May 2022 19:32:03 +0000 (19:32 +0000)]
Bug 26632: (Bug 22532 follow-up) Remove random variables
AddBiblioToBatch and AddAuthToBatch were btoh passing a random number for the
parameter $update_counts
This simply removes that value as should have been done on 22532
To test:
1 - Stage a marc file
2 - Confirm it works befor and after patch
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 66c5ab528cf9ed8afa23dd6f14ddf890ef1e9039)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
David Cook [Thu, 11 Aug 2022 05:40:45 +0000 (05:40 +0000)]
Bug 31294: Show "Required" label on mandatory fields
This patch adds "Required" label on mandatory fields for Article Requests
0. Apply the patch
1. koha-plack --restart kohadev
2. Change syspref 'ArticleRequests' to 'Enable'
3. Change syspref 'ArticleRequestsMandatoryFields' to '[Select all]'
4. Go to http://localhost:8080/cgi-bin/koha/opac-search.pl?idx=&q=test&weight_search=1
5. Click "Request article" for "Gairm"
6. Note that "Title", "Author", "Volume", "Issue", "Date", "Pages", and
"Chapters" all say required
7. Change syspref 'ArticleRequestsMandatoryFields' to 'Title' and
'Author'
8. Go to http://localhost:8080/cgi-bin/koha/opac-request-article.pl?biblionumber=29
9. Note that only "Title" and "Author" say required
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5c1db538e6c25da27484e39ae619e09779aac1c2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Alex Buckley [Tue, 9 Aug 2022 07:26:07 +0000 (07:26 +0000)]
Bug 31302: Fix spelling in sample_notices.yml
Test plan:
1. Apply patch
2. Confirm 'URL(s)', rather than urls(s), is in the line:
You can download the scanned materials via the following URL(s)
Sponsored-by: Catalyst IT, New Zealand Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b3d8941c34887b34c69edac8f33b7de179d96267)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle Hall [Mon, 1 Aug 2022 14:47:04 +0000 (10:47 -0400)]
Bug 31276: Report results are limited to 999,999 no matter the actual number of results
In Koha, any report that uses C4::Reports::Guided will be limited to 999,999 rows. This is causing problems for larger libraries where some reports may have over a million results.
Test Plan:
1) Create a report "SELECT * FROM borrowers" and run it, note the number
of results
2) Apply this patch
3) Add the line `<report_results_limit>3</report_results_limit>`
within the <config> block of your koha-conf.xml
4) Restart all the things!
5) Run the report, download the results as a CSV
6) Note your CSV only has 4 lines, the header and 3 patrons
Signed-off-by: Rachael Laritz <rachael.laritz@inlibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5e29433bdc3a5ccd582ece6e2338c6e38e97c5d9)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Magnus Enger [Tue, 9 Aug 2022 06:49:54 +0000 (06:49 +0000)]
Bug 31325: Fix koha-preferences get
To reproduce:
$ perl koha/misc/admin/koha-preferences get MarcFlavour
This will output something like "HASH(0x55dd4d432840)".
To test:
Apply this patch and run the command again:
$ perl koha/misc/admin/koha-preferences get MarcFlavour
This should output something like "MARC21".
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3f1fe4f178df3423bc95f9a288aaefdda6a6e8c0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Katrin Fischer [Sun, 7 Aug 2022 16:14:37 +0000 (16:14 +0000)]
Bug 31281: Use correct reply-to email when sending overdue mails
Overdue emails are either sent from the issuing or the home
library of an item. We never use the patron's home library,
so the reply-to address must explicitly be set in EnqueueLetter.
To test:
- Set up 2 branches (A and B) with different email addresses.
- Set up an SMTP server for each to use
- Set up an overdue notice trigger for the patron category you'll use
First letter: 1 day delay, any notice
- Check out an item with home branch B to a patron from A
- Run the the script with:
overdue_notices.pl -t --frombranch item-homebranch
overdue_notices.pl -t --frombranch item-issuebranch
- Confirm for each setting that the correct email headers have been
used. You can see the reply-to address and to-address in the
message queue:
SELECT * FROM message_queue;
Signed-off-by: Nason Bimbe <nason.bimbe@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 18b2389de49b5c403f7bd68ef315b044a201eff5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Thu, 11 Aug 2022 22:56:49 +0000 (22:56 +0000)]
Bug 31346: Fix broken Syndetics links on OPAC detail page
To test:
-Have some Syndetics credentials
-Turn on SyndeticsCoverImages
-Look at some and you'll notice that Syndetics cover images dont always load
-If you view the page source you'll see why. The links are built like this:
https://secure.syndetics.com/index.aspx?isbn=/LC.GIF&amp;client=bedf&type=xw10&upc=843501038123&oclc=1311289389
-Apply patch
-Cover images should load properly.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 10ced3c49485aa5cdfc0cd06cfff30ddb7f9afe7)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31245: Do not try to report results if task not started
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Andrew <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 12bc623ae7bcbd03fd4c8505bf1c55010bb3d0f7)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 27 Jul 2022 08:35:08 +0000 (10:35 +0200)]
Bug 31245: Do not call report for job detail view if job not started
We should not generate the report if the job hasn't started yet
Test plan:
Stop the koha-worker processes, modify a new item using the batch mod
tool, then see the detail page of the job
Without this patch an error is generated:
Can't use an undefined value as an ARRAY reference at /kohadevbox/koha/Koha/BackgroundJob/BatchUpdateItem.pm line 175
Signed-off-by: Andrew <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 931f4bd79776215b8cb1e656d58abf80b7aad8db)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Andreas Roussos [Mon, 8 Nov 2021 07:19:58 +0000 (08:19 +0100)]
Bug 29434: add UNIMARC relationship codes for authorities
When using the authority finder plugin (authorities/auth_finder.pl),
you can pick an entry from the 'Special relationship:' dropdown menu
in order to set the relationship between authorities.
However, in UNIMARC instances the relationship codes listed are those
for MARC21. The correct codes for UNIMARC are listed in pages 93-94
of the IFLA UNIMARC Manual for Authorities.
Test plan:
1) In a UNIMARC instance, launch authorities/auth_finder.pl in the
Staff client, by clicking on the 'Tag editor' button. Notice how
the 'Special relationship:' dropdown menu lists the relationship
codes for MARC21 instead of UNIMARC.
2) Apply this patch.
3) Launch the authority finder again; this time the correct values
should be listed in the 'Special relationship:' dropdown menu.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit a5dfa2d4901575c93d900f300fe5b5b2d7f178d4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31155: Document --since option in help of borrowers-force-messaging-defaults.pl
This patch adds a section about the --since option in the help section
of borrowers-force-messaging-defaults.pl
To test:
0) Apply patch
1) run the script with the --help option, e.g.
./misc/maintenance/borrowers-force-messaging-defaults.pl --help
--> There should be an explanation of the --since option with examples
for specific and relative dates
2) Optionally, run the script with different options
--> The behaviour shouldn't have changed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 42b316912097fc11d55d3f8bacc4ade2107b4c7e)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31292: Untranslatable string in sample_notices.yaml
This patch removes a regex that discard lines in multiline YAML values
On close inspection, there is no need for it.
To test:
1) go to misc translator, update some language
./translate update fr-CA
2) check missing string
egrep "You may pick up your article" po/fr-CA-installer.po
from sample_notices.yaml
3) apply the patch, repeat 1)
4) repeat 2), verify the string is present in the translation file
5) translate the new string, install the language,
verify string is present in the translated file
./translate install fr-CA
check fr-CA/mandatory/sample_notices.yml
There are three new strings
msgid "%sDear %s %s,%s"
msgid "%s%s%sTitle: %s"
msgid "%sYou may pick up your article at %s.%sYou can download the scanned materials via the following url(s): %s.%s"
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 99790c6c38af93698069f5f493b299a715eabd68)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31289: Hide Article requests column in circulation rules when ArticleRequests syspref is disabled
This patch hides the Article requests column in the large circulation
rules table when the ArticleRequests system preference is disabled.
To test:
0) Apply patch
1) With ArticleRequests disabled, go to Administration > Circulation and fines
rules
2) Scroll right in the first table
--> There isn't any mention of article requests in the table
3) Scroll down to see the other tables in the page
--> There are no other article requests tables
4) Enable ArticleRequests in Administration > System preferences
5) Go back to the Circulation and fines rules and refresh the page
6) Scroll right in the first table
--> There should be an article requests yes/no column
7) Scroll down to see the other tables in the page
--> There are other article requests tables, Default open article requests
limit and Default article request fees
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4b875fa936f1c971e734e71ec7727d780ba9a9af)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Katrin Fischer [Sat, 30 Jul 2022 21:35:50 +0000 (23:35 +0200)]
Bug 31272: Use TT plugins for pickup library and due date in opac-reserve.pl
Before this patch the date formatting for the due date was done
in the .pl instead of the template and the branchcode would show
instead of the library's name in the list of items when placing
an item level hold in the OPAC.
To test:
* Find or create a record with mulitple items
* Check out one of the items
* Place a record level hold
* Return an item to set to waiting
* Place an item level hold
* Go to the OPAC and start placing an item level hold
* Verify the messages in the item table show the branchcode
* Apply patch
* Only visible change should be the library name replacing the branchcode
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2353893c1acc45c99f5afbe0bde5dcd049d88660)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31249: Use cronlogaction on update_patrons_category.pl
This patch does what the title says.
To test:
1. Run the script
2. Check the action logs
=> FAIL: Boo, no record of the running cronjob
3. Apply this patch
4. Repeat 1-2
=> SUCCESS: Yay!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Liz Rea <liz@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e4d2ef0f4691058cdb9fdff34a5a555a755f75a2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 13 Jul 2022 06:01:48 +0000 (08:01 +0200)]
Bug 30992: Improve translatability for 'for'
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 92f5e02a8c2ee7efaa9478015a860a5f62ee05aa)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Wed, 13 Jul 2022 06:01:34 +0000 (08:01 +0200)]
Bug 30992: Improve translatability for Waiting at|On hold
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit eedec9e929c641c9dcdb5c002f812ecf034433d4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 22 Jun 2022 14:55:03 +0000 (14:55 +0000)]
Bug 30879: Add option to syspref and update display
To test:
1 - Update ComponentSortField system preference and verify biblionumber is an option
2 - Repeat test plan from 30327 and confirm sorting with biblionumber works
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 505e12970d81fe30436a6a86189c17c9c242a729)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 22 Jun 2022 14:49:05 +0000 (14:49 +0000)]
Bug 30879: Handle index/sorting for UNIMARC
Same as before, but test with UNIMARC setup
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit fbf1c32a6ff03b29f68f0bee6017fb15ea8b0c1b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 22 Jun 2022 14:42:17 +0000 (14:42 +0000)]
Bug 30879: Allow biblionumber as sort option in Elasticsearch
Repeat previous tests with Elasticsearch engine
You will need to reindex and reset mappings to pickup the changes form the file
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c8c51867c479bc153d84f9e23cad5983bdd535cb)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Nick Clemens [Wed, 22 Jun 2022 14:37:23 +0000 (14:37 +0000)]
Bug 30879: Add biblionumber as a sorting option in MARC21
This patch updates the Local-Number indexing by adding a zeropad option
to Zebra indexing and adding this to the mapping files
It also updates C4/Search.pm to allow biblionumber as an option
To test:
1 - Apply patches
2 - copy etc/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl to /etc/koha/zebradb/marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl
3 - Restart all, reindex zebra
4 - Browse to: http://localhost:8081/cgi-bin/koha/catalogue/search.pl?idx=kw&q=a&sort_by=biblionumber_dsc&count=20
5 - Confirm records sorted correctly
6 - Browse to http://localhost:8081/cgi-bin/koha/catalogue/search.pl?idx=kw&q=a&sort_by=biblionumber_asc&count=20
7 - Confirm records sorted correctly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 230bae0b02875dc25abe8ba71f6e7217fce80b76)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 31274: Make sure OPACSuggestionAutoFill is handled as a boolean everywhere
The YAML preference definition defines it as a string ('yes' or 'no' the
possible values). And the opac-suggestions.tt template has one occurence
of the variable being compared to a string.
This patch does:
- fix the template
- fixes opac.pref for 0|1
- adds an atomicupdate that takes care of moving 'yes' and 'no' to their
respective boolean values.
To test:
1. Change the syspref value to enable/disable
2. Check on the DB that the value is wrong:
$ koha-mysql kohadev
> SELECT value FROM systempreferences WHERE variable='OPACSuggestionAutoFill';
=> FAIL: It is either 'yes' or 'no' depending on what you choose.
3. Apply this patch
4. Run:
$ updatedatabase
5. Repeat 2
=> SUCCESS: Values are now 0 or 1
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 1c0b7bf01fabe7dfa558b29a7549c39a6f627c18)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Marcel de Rooy [Mon, 1 Aug 2022 07:25:10 +0000 (07:25 +0000)]
Bug 27849: (follow-up) Add test
Compacting the code a bit too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ad0aa754ee2a3e8e438594a54b2375b994753951)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
MJ Ray [Wed, 3 Mar 2021 17:54:42 +0000 (17:54 +0000)]
Bug 27849: Koha::Token may access undefined C4::Context->userenv
The _add_default_csrf_params internal function accesses
C4::Context->userenv without checking that it has been defined. I think
not all of the potential callers of it declare that they require a
defined userenv, so we should test and provide defaults for required
values if it is not defined, to avoid some "Can't use an undefined value
as a HASH reference" HTTP 500 Internal Server Errors.
To test:
Do anything that requires a form with CSRF token, such as editing your
details. Behaviour should be unchanged. To test the failure case, you
would need some customised code that indirectly generates a CSRF token
before setting the userenv up and I am not sure there is any in released
Koha yet.
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Looks good to me. Working as expected.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8c45fe1aaa54fd9d6ff84617df0bb94b4cfbbb12)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Michael Hafen [Fri, 13 Aug 2021 21:52:52 +0000 (15:52 -0600)]
Bug 28864: Have patron card creator use PatronsPerPage
Add pageLength to members/member.tt
Add aLengthMenu and pageLength to
patroncards/add_user_search (common/patron_search.tt).
Add aLengthMenu, pageLength, and iDisplayLength to patroncards/edit-batch
Test plan:
1. Set the PatronsPerPage system preference to any integer other than 20.
2. Go to Tools -> Patron card creator.
3. Start a new Card Batch.
4. Click the 'Add patron(s)' button to open the patron search window.
5. Do a search.
6. Add more than 20 patrons to the batch.
7. Close patron search window.
8. Click the 'Add patron(s)' button to add the selected patrons to the batch.
9. Observe that the table of patrons is has 20 as the default per page setting.
10. Apply patch.
11. Reload the batch.
12. Observe that the per page drop down includes the value of PatronsPerPage
and that value is selected by default.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5ca665f6aaf750fa507875343da0adb423ad7bd8)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle Hall [Fri, 29 Jul 2022 10:53:06 +0000 (06:53 -0400)]
Bug 30984: (QA follow-up) Switch from mediumtext to varchar(255)
My research indeicates that tinytext of less than 40 bytes uses
about the same storage as a varchar(255). Also, using
a TEXT field in a complex query may create a temp table.
varchar fields are also more efficient for sorting on.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b3a0d75a40cfeec8e14d7092b4cf23763363b45a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle Hall [Fri, 17 Jun 2022 10:59:11 +0000 (06:59 -0400)]
Bug 30984: Action logs should log the cronjob script name that generated the given log
When something is changed by a cronjob, and that entity is logged via action logs, we can know what changed, and that it was via a cronjob, but we cannot necessarily know which cronjob made that change. The closest we can come is to find the action logs for the cronjob module which ran before the change which is by no means reliable assuming the CronLog is even enabled.
We should add a new column to action logs to store the name of the script ran for any action logs where the interface is "cron".
Test plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable all the Log/Logging sysprefs
4) Run some cronjobs that will generate action logs
5) Note the new action_logs column "script" contains the filename of the
cronjob that caused the change.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 18fd0c89cf7f288ad5ff4527484d9e989ed3e5f7)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Jonathan Druart [Mon, 1 Aug 2022 10:31:21 +0000 (12:31 +0200)]
Bug 30468: Restore 'set -e' and remove echos
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4a00658e349fb21a9a334f0ab880d81b8f51d2e3)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Kyle Hall [Wed, 6 Apr 2022 12:38:00 +0000 (08:38 -0400)]
Bug 30468: koha-mysql does not honor Koha's timezone setting
If I run a query like "SELECT NOW()" from a koha report, I will get a different answer than if I had run it from koha-mysql.
In Koha, we set the timezone for each database connection.
However, koha-mysql does not do this, so instead we are left using the default timezone of the database.
Test Plan:
1) Set your time zone to something other than the database time zone
2) run "SELECT NOW()" using debian/scripts/koha-mysql
*not* /usr/sbin/koha-mysql
3) Note you get the database timezone's current time
4) Apply this patch
5) Repeat step 2
6) Now you get the correct time!
Signed-off-by: Michal Urban <michalurban177@gmail.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e97b099d58e73be44354d2343c0f45077871b398)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Fri, 29 Jul 2022 23:41:13 +0000 (23:41 +0000)]
Bug 31269: Define sDefaultContent for DataTables
1. Stage a MARC record for import
2. Once you have one click on 'Manage staged records'
3. You will see an alert that says "Something went wrong when loading the table."
4. If you dismiss that you should see the following error:
DataTables warning: table id=records-table - Requested unknown parameter '' for row 0, column 4. For more information about this error, please see http://datatables.net/tn/4
5. Appy patch
6. Try ssteps 1 & 2 again
7. No DataTable errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 573db0fca181cb36063462ed566adc5bac7f293d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Shi Yao Wang [Fri, 27 May 2022 14:52:08 +0000 (10:52 -0400)]
Bug 30028: Fix patron message delete confirmation to be translatable
Make the message deletion confirmation popup translatable. Test plan
uses fr-CA translations.
Test plan:
1) Switch language to french (fr-CA)
If you do not have the translations, go to
misc/translator
then do
./translate install fr-CA
After it is done, go to administration > global system preference >
l18N/L10N then select Français (fr-CA) under language preference.
Refresh then you should be able to switch languages.
2) Add a message to a patron account from your own branch (or make sure AllowAllMessageDeletion is on)
3) Click "Delete" next to the message
--> a confirmation message appears "Are you sure you want to delete this message? This cannot be undone." with options "Cancel" and "OK".
4) Apply the patch
5) Write a translation in misc/translator/po/fr-CA-messages-js.po :
msgid "Are you sure you want to delete this message? This cannot be undone."
msgstr "Êtes-vous sûr de vouloir supprimer ce message? Cette opération est irréversible."
6) Refresh the translations by going to misc/translator and execute ./translate install fr-CA
7) Refresh and click "Delete" again
--> now the confirmation message is "Êtes-vous sûr de vouloir supprimer ce message? Cette opération est irréversible." with options "Cancel" and "OK"
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 622137294a4f1eca66ff794e1a91a75c08fe30c8)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This is because the include statement for catalogue-search-box.inc is in the wrong line in circ-search.inc.
To test:
1) Go to an affected page (circulation-home was the first one I noticed)
2) Try the keyboard shortcuts and notice they are incorrect
3) Apply patch and refresh the page
4) Notice that the keys work properly
Signed-off-by: Andrew <andrewfh@dubcolib.org> Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 94191e5bfe681dca021bb133c9593bc5bc7e2193)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
first two are from sample notices, third from sample creator data
3) apply the patch, repeat 1)
4) repeat 2), verify the strings are present in the translation file
5) translate some of the new strings, install the language,
verify strings are present in the translated files
./translate install fr-CA
check fr-CA/optional/sample_creator_data.yml and
fr-CA/mandatory/sample_notices.yml
There are some 60+ new strings.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 160d96e176331f8ac8eef4942bcc0af1868017c5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Lucas Gass [Thu, 28 Jul 2022 18:18:15 +0000 (18:18 +0000)]
Bug 31251: Use jQuery val() to clear_entry
1. Add some patron attributes that are textarea and some that have an AV category so they are select dropdowns
2. Go to the patron form and add some values to the patron attributes
3. Use the "Clear" button to try and clear the values, doesnt work.
4. Apply patch
5. Try clearing values from patron attributes that are both select dropdowns and textarea. The "Clear" button should work.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit a3198f647496d87e19036432f1be9f87dac4614d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
projects / koha.git / log