Nick Clemens [Tue, 21 May 2024 12:26:34 +0000 (12:26 +0000)]
Bug 36908: Additional unit tests to identify flaw when two branches have same IP
This could be considered a configuration flaw, but when:
StaffLoginBranchBasedOnIP enabled and not AutoLocation
or
AutoLocation enabledand no IP set in user's branch
AND
two branches have the same IP set
the user can be logged in randomly to one of the matching branches.
These test often pass, but will also randomly fail
Easier to verify with a one liner demonstrating current code:
perl -e 'use Koha::Libraries; use List::MoreUtils qw(uniq); my $branches = { map { $_->branchcode => $_->unblessed } Koha::Libraries->search->as_list }; my $branchcode="CPL"; warn Data::Dumper::Dumper( uniq( $branchcode, keys %$branches ));'
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 7e8803537254ec950c64327bece8091e6cf49499) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Thu, 23 May 2024 06:49:39 +0000 (08:49 +0200)]
Bug 36924: Remove warning "Value not allowed for auto_incr itemnumber in Item"
We are removing entirely the badly written test.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Note: We cannot test this properly when the search index refers to biblios
and items that do not exist in the database. Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 12511385289b41c3c3d067f1b7c4397010e3d27c) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Fri, 17 May 2024 11:59:21 +0000 (11:59 +0000)]
Bug 36665: Add option to set the staff user's logged in branch based on their current ip
This patch adds a new system preference StaffLoginBranchBasedOnIP which restores the behaviour before bug 35918
of using the current IP to determine the user's logged in branchcode
To test:
1 - Get your current ip
2 - Set that IP for a library in the administration section
3 - Find a user account assigned to a different library that can login to staff side
4 - Login to staff as that user, select 'My library'
5 - You are logged in to the user's branch
6 - Apply patch, restart all
7 - Log out and back in, selecting 'My library'
8 - You are logged in to the user's branch
9 - Enable new system preference StaffLoginBranchBasedOnIP
9 - Log out and back in, selecting a different branch, noting the new warning below the library selection
10 - You are logged in to the branch with the matching IP
11 - Log out and back in, selecting 'My library'
10 - You are logged in to the branch with the matching IP
11 - Change your logged in branch
12 - Verify the selection sticks and you can perform staff actions in the chosen branch
13 - Change the IP of the library to one that doesn't match yours
14 - Verify you can log out and log back in and that selected branch is respected when your IP doesn't match library IP
Signed-off-by: Kristi Krueger <KKRUEGER@cuyahogalibrary.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3a0d6f5d07b914ab03f9ae3c56b033158bd91130) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Wed, 1 May 2024 18:19:42 +0000 (18:19 +0000)]
Bug 35929: Don't record a change for empty fields submitted in patron form
This is reminiscent of bug 36159 - when a field is submitted as empty, and null in the DB
we need to reject this as a change. I tried to copy the logic from that bug, as well as
deleting submitted changes for hidden fields (from html manipulation)
This should be tested extensively. One note: If you submit a valid change request, then submit a second with no change the second will be ignored, but the first will remain. i.e. if you change your name from 'Nick' to 'Nack' - then realize your typo you cannot submit a new request to change it back untl the initial request is cleared
To test:
1 - Play with PatronSelfModificationBorrowerUnwantedField and PatronSelfModificationMandatory field to have some fields set
2 - Add a patron attribute, or several, that are editable in the OPAC
3 - Try submitting a form with no changes, note a modification requets is submitted
4 - Approve the request
5 - Apply patch, restart all
6 - Try submitted a blank request, you are notified there were no changes
7 - Try to force an unwanted field via html modification
8 - No changes reported
9 - Confirm attributes changes are successful
10 - After a successful request, try submitting a blank request
11 - Note no changes are recorded, but the initial request is still active
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit cf4a3667cbeb4dbb6b7dd74fd30a3cacca540603) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Tue, 14 May 2024 07:29:02 +0000 (09:29 +0200)]
Bug 36845: Exclude meta tag from the translations
This bug originaly wants to get rid of "noindex" coming from this meta
tag:
<meta name="robots" content="noindex">
But actually we have other strings from the meta tags that should not be
translated.
Test plan:
0. Do not apply this patch
1. cd misc/translator/po && gulp po:update --lang es-ES (or any other
lang)
2. git commit -a -m"wip"
3. Apply this patch
4. Repeat 1 and git diff to show the diff
Notice that strings that should not be translated are removed from the
po files (actually commented)
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit fbb123b12eab123e62c508944fd2b6261fb24acf) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Thibaud Guillot [Fri, 17 May 2024 09:13:21 +0000 (11:13 +0200)]
Bug 36892: Fix label for 'is_standing' input
Test plan:
1) Go to acqui/histsearch.pl and look for "search_children_too" with
dev tools console.
2) On 'is_standing' input, the same label is used
3) Apply this patch and reload it
4) Now it's correct
Sponsored by: BibLibre
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 40900343673c280d092de9c57399a77c113b41ba) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Tue, 14 May 2024 09:41:57 +0000 (11:41 +0200)]
Bug 36856: Fix MARC subfield name in new order from existing bibliographic record
In form of the bibliographic details when adding an order 'From an existing record' in a basket, the marc subfield name is not shown.
The template calls [% field.lib | html %] but this comes from Koha::UI::Form::Builder::Biblio generate_subfield_form() which gives 'marc_lib'.
Test plan:
1) Be sure to have an ACQ biblio framework
2) Enable system preference UseACQFrameworkForBiblioRecords
3) Go to an acquisition basket
4) Add a term in 'From an existing record' and submit
5) On first result click on 'Add order'
6) Look at 'Catalog details'
=> Without patch you only see subfield tag and letter : (123a)
=> With patch you also see subfield name : Name (123a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5080eecc2268c2b7b88856800e728041c2fc29ec) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Fri, 5 Apr 2024 16:05:56 +0000 (16:05 +0000)]
Bug 36528: Correct JS assets included in self checkout slip template
The self checkout's slip print template includes some assets which it
doesn't need (enquire.js) and lacks other that it does (i18n-related
files). This patch correct the problem.
The patch also wraps some code in global.js with a check that the
relevant library has been loaded so that we don't get errors when the
asset isn't included.
To test, apply the patch and clear your browser cache.
- With WebBasedSelfCheck enabled, log in to the self checkout module and
check some items out.
- Click "Finish" and then "Print receipt..."
- Check the browser console on the receipt page. There should be no
errors.
- Log in to the OPAC and click the "Messaging" tab on the patron summary
page.
- Test that the "Digests only" table heading icon shows a tooltip.
- Test that enquire.js is still loading correctly by performing a
catalog search and narrowing your browser. When the window is narrow
enough, the facets sidebar should collapse into a "Refine your search"
button.
Note that the "js_in_body" qa warning is a false positive.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3b9a43ec5a5ce24865f93a345215858b74348b2b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Janusz Kaczmarek [Sat, 11 May 2024 08:41:04 +0000 (08:41 +0000)]
Bug 36834: (Bug 29697 follow-up) Koha explodes when trying to open in Labeled MARC view a bibliographic record with an invalid biblionumber
After changes made in catalogue/labeledMARCdetail.pl with the bug 29697
when trying to open the Labeled MARC view with
biblionumber=<invalid_number> (e.g. a deleted biblionumber) Koha explodes
with a message << Can't call method "metadata" on an undefined value at
/kohadevbox/koha/catalogue/labeledMARCdetail.pl line 59 >>
Test plan:
==========
1. Activate the viewLabeledMARC syspref.
2. Try to open a biblio record in Labeled MARC view, giving as a biblionumber
(in URL) a non-existing biblionumber, e.g. in ktd, with standard ktd
test data:
http://your_ktd:8081/cgi-bin/koha/catalogue/labeledMARCdetail.pl?biblionumber=1234567
Koha should explode with the message:
Can't call method "metadata" on an undefined value at
/kohadevbox/koha/catalogue/labeledMARCdetail.pl line 59
3. Apply the patch; restart_all.
4. Repeat p. 2. You should get a regular page with the info "The record you
requested does not exist (1234567)".
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e4e54af0e77a01d8ad1ee6ac84f5b255951f1831) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Thu, 16 May 2024 12:52:04 +0000 (12:52 +0000)]
Bug 36872: Untranslatable strings in request.tt
There are errors in the JavaScript in the holds template in the staff
client which results in strings not being translatable. This patch
corrects the errors.
To test, apply the patch and run through the process of placing a hold
on multiple items in the staff interface.
- At the hold confirmation step, try to submit the form without
selecting pickup locations for one or more titles.
- You should get an alert, "Please make sure all selected titles have a
pickup location set".
- Uncheck the checkboxes next to each title you're placing a hold on.
- Submit the form. You should get an error: "Please select at least one
title".
- Test the translation process with a language, e.g. fr-FR:
- In KTD, run: gulp po:update --lang fr-FR
- Check fr-FR-staff-prog.po for the line referring to
koha-tmpl/intranet-tmpl/prog/en/modules/reserve/request.tt:1499
- You should see the string "Please make sure all selected titles have a
pickup location set".
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 537c960777f94cf964c757ed2773f330612ae3c7) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 36529: manage_additional_fields permission for more than acquisitions and serials
This patch renames the manage_additional_fields permission to remove
the specificity of acquisitions orders and serial subscriptions.
Since each additional field requires a corresponding permission, I
wrote each of them next to it. It makes it very long, but right now
there isn't really a way to link permissions other than the permission
description.
To test:
1. Apply patch
2. Go to a patron account
3. Click More > Set permissions
4. Go to the Administration panel permissions and open the
sub-permissions
5. Check that the manage_additional_fields permission description
makes sense, check grammar and spelling, try the various
combinations
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e251212ff5f783ff7d5d9de3821510ba7928d95f) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Tue, 14 May 2024 18:02:49 +0000 (18:02 +0000)]
Bug 35285: (QA follow-up) Tidy
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit b1fe94cd58bc0e01d0a730a6b8c5f3dc3ee439ba) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Mon, 13 Nov 2023 16:46:17 +0000 (16:46 +0000)]
Bug 35285: Unit tests
This patch adds unit tests for the new 'is_html' function introduced in
Koha::Notice::Message and update the tests to include the new plaintext
handling of html_content.
Signed-off-by: David Nind <david@davidnind.com>
test
Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 64a9e3c99951b466ffbb0b9b3f5d5654b5e0f6fb) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Wed, 8 Nov 2023 10:43:09 +0000 (10:43 +0000)]
Bug 35285: Remove switch in notices.tt
We now wrap appropriately for non-html formatted messages as
part of the html_content method. This means we can remove the
case from members/notices.tt and rely on html_content doing
the right thing for notice previews.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 74f9c57adfa2577cfcaff9ef1f92ee42a3d35451) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Wed, 8 Nov 2023 09:59:30 +0000 (09:59 +0000)]
Bug 35285: Add non-html template support to html_content wrapping
This patch adds support for messages generated using non-html formatted
notice templates to the html_content method of Koha::Notice::Message.
We continue to wrap content for html generated messages with the
appropriate headers, css and title.
For non-html generated content we wrap in the <div style="white-space:
pre-wrap"> block to maintain text formatting as defined in the original
plaintext template.
Test
Follow the test plan for bug 30287, nothing should outwardly change.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 6b413acfc41f580ac6b424c554ac47a6fa953782) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Janusz Kaczmarek [Tue, 14 May 2024 11:08:19 +0000 (11:08 +0000)]
Bug 24424: Advanced editor - interface hangs as "Loading" when given an invalid bib number
The Advanced Editor hangs with "Loading, please wait" message when given an
invalid bib number, e.g. /cgi-bin/koha/cataloguing/editor.pl#catalog/55555
This is because in the bug 16424, when changes had been made to
koha-tmpl/intranet-tmpl/lib/koha/cateditor/koha-backend.js
(Bug 16424: Add framework support to advanced MARC editor),
the .fail callback method of the outer .get (in the KohaBackend.GetRecord
function called from cateditor-ui.inc) had been (perhaps by mistake?) removed.
So, in case of failure, the situation is not handled properly.
The proposal is to restore the outer .fail. As a result, the
openRecord( 'new/', editor, finishCb ); will be called (a standard way
of resolving failed openRecord action (cf. the bottom of cateditor-ui.inc).
Test plan:
==========
0. Be sure your browser does not cache JavaScript for this test.
1. Enable EnableAdvancedCatalogingEditor in the system preferences.
2. Try to open in the advanced editor an unexisting record, e.g.
http://your_ktd:8081/cgi-bin/koha/cataloguing/editor.pl#catalog/55555
Koha should hang with a message "Loading, please wait".
3. Apply the patch, restart_all.
4. In a new browser window, repeat p. 2 (remember not to cache JS).
5. The editor should open with a new empty record.
Sponsored-by: Ignatianum University in Cracow Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4d344fd3ab6fa988a9b3e79e683c8217f0705d2c) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Marcel de Rooy [Mon, 6 May 2024 12:28:45 +0000 (12:28 +0000)]
Bug 36793: Fix case of $var in Context->delete_preference
This only applies to 'local' preferences.
Test plan (first without this patch):
Add a local pref. Delete it. Ask value on commandline with:
* perl -MC4::Context -e"print C4::Context->preference('YOUR_PREF')"
* Did you replace YOUR_PREF :)
Now repeat with this patch. And verify fix (no value now).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8ea126b1f89e24a2baf8c43f7bf837bf74741088) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Wed, 17 Apr 2024 10:18:11 +0000 (12:18 +0200)]
Bug 36619: Restore 'Columns' visibility on the patron search when placing a hold
Test plan:
Go to /cgi-bin/koha/reserve/request.pl?biblionumber=117
Search for "d"
Notice that with this patch applied the "Columns" button is back and
that the "Configure" is working correctly
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 76ebbb4b9b3a39c6e7ffffe8ad1b9b2c603daf5c) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Lucas Gass [Mon, 13 May 2024 22:15:02 +0000 (22:15 +0000)]
Bug 35961: (follow-up) Pass along the borrowernumber
To test:
1. APPLY PATCH
2. Turn on OpacCatalogConcerns
3. Find a record and go to the OPAC detail page.
4. Click "Report a concern" in the right navigation menu
5. Make sure it works
6. Repeat the proces from MARC view and ISBD view pages
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e412a4387c888816cf478d811a559c5f57f7e9e2) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Martin Renvoize [Mon, 13 May 2024 13:43:53 +0000 (14:43 +0100)]
Bug 35961: Add missing includes
This patch adds the missing includes for the 'Catalog concerns' modal on
opac-MARCdetail and opac-ISBDdetail views.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c2154173af06efaf007e0cdf444f885275d61f1b) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Janusz Kaczmarek [Wed, 17 Apr 2024 11:17:22 +0000 (11:17 +0000)]
Bug 36620: Broken order management for suggestions with quantity
Test plan
=========
Scenario A (the bug)
--------------------
1. In OPAC, create a purchase suggestion with defined quantity
("Copies" in staff interface).
2. Accept the suggestion.
2. Have a budget, fund, vendor etc. to use the Acquisitions module.
Ensure that AcqCreateItem syspref is set to 'placing an order'.
3. Create a new basket and add to basket an order line from accepted
suggestion. Note the initial Quantity set to the quantity entered
in suggestion. Note increasing this number while you add items
to the order with the 'Add item' button. Save the order, close the
basket.
4. Start receiving shipments for this order (create invoice etc.).
Receive items you created by 'Add item' until there is nothing more
to receive. Note the number of unreecived items in the order (eqal
to the initial quantity from the suggestion) that cannot be regulary
received (with the items table on the left). This is the *bug*.
[This is due to the ambiguity of $data->{quantity} in the neworderempty.pl
-- it normally comes from the order: GetOrder, but in the case of a yet
empty order created from a suggestion, it comes from the suggestions table:
GetSuggestion].
5. Apply the patch, restart plack etc.
6. Repeat step 2 and 3. While adding items in order note that you start
from quantity 0, and that the suggested quantity is shown in brackets.
7. Continue with p. 4. You should be able to receive the order in the
regular way (with the items created).
Scenario B (bonus)
------------------
Repeat the above with AcqCreateItem syspref is set to 'receiving the order',
or 'cataloging the record'. These cases do not create a bug as it does
the case with 'placing an order'. Note however, after applying the patch,
the initial quantity in the order is set to 0 and there is the bonus infomation
about the suggested number of items (from the suggestion).
Sponsored-by: Ignatianum University in Cracow Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3cfe1af7dba820410c5537172a875e82d472c8e2) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jan Kissig [Fri, 3 May 2024 12:11:58 +0000 (14:11 +0200)]
Bug 36772: OPAC Self checkout accepts wrong or partial barcodes
When using the opac trusted checkout feature it is possible to enter non existant or partial barcodes to check out items.
Testplan:
a) set System preference OpacTrustedCheckout to Allow
b) go to http://localhost:8080/ and login with koha / koha
c) click Self Checkout in navigation bar
d) enter barcode 1234
e) result: Item '39999000011234' was checked out
apply patch and reload the page
a) now enter barcode 1234
b) result: Item '1234' not found
c) enter 39999000011234
d) result: Item '39999000011234' was checked out
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 2884226fe27cd3e4d5f4a070405c047183fed881) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Emmi Takkinen [Fri, 10 May 2024 05:31:42 +0000 (08:31 +0300)]
Bug 36825: Hide "Protected" field via BorrowerUnwantedField syspref
Setting field "Protected" as hidden in patron entry/modification
form via BorrowerUnwantedField syspref doesn't work. Form is
missing condition "UNLESS noprotected".
To test:
1. From BorrowerUnwantedField, check field "Protected" as hidden.
2. Either attempt to create a new patron or modify existing one.
=> Note that "Protected" is still displayed in the form.
3. Apply this patch.
4. Navigate back to create/modify patron form.
=> Note that "Protected" is no longer displayed.
5. Uncheck field "Protected" from BorrowerUnwantedField.
=> Field should now be displayed in create/modify form.
Sponsored-by: Koha-Suomi Oy Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit a0b1ee7df30a191a65fc44020bbe18dd69366ce2) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
I checked the UNIMARC authResults counterpart file. And it only
contained a single case of generated elements like the previous patch.
To test:
1. On latest main
$ ktd --shell
k$ cd misc/translator/po
k$ git fetch
k$ git reset --hard origin/main
k$ cd /kohadevbox/koha
k$ gulp po:update --lang es-ES
k$ cd misc/translator/po
k$ git add -u ; git commit -mWIP --no-verify
2. Apply this patches
3. Run:
k$ cd /kohadevbox/koha
k$ gulp po:update --lang es-ES
k$ cd misc/translator/po
k$ git diff
=> SUCCESS: Notice CSS class names are not translated anymore
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 537d5aac5ac46718e3a1a5f8dac2baf26a8abdea) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the XSLT contain HTML tags instead of building them
from scratch with static attribute values. This made it awkward for
translators as CSS classes ended up being extracted for translation
purposes. Plus, there's no need to spend CPU cycles on static content
generation.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 48e39c1e5cea2db2c4e0951a6efcae7e611490fb) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Janusz Kaczmarek [Tue, 18 Apr 2023 19:42:24 +0000 (21:42 +0200)]
Bug 33099: Add missing MARC21 Match authority mappings so "Search all headings" search works
The main entry form of corporate names (110), uniform titles (130), topical
terms (150), geographical names (151), and genre/form (155) are not indexed
with 'Match' search field in Elasticsearch standard mapping. As a result,
the respective records are not present on the result list when performing
an 'All headings' search for the authority records with the main heading form
(MARC 21).
Test plan
=========
0. Have a test installation with Elasticsearch.
1. In Authorities, make an 'All headings' search for a main entry
form from the corporate names, uniform titles, topical terms,
geographical names, or genre/form
--> e.g., in ktd: UK Archiving. You will get no results.
2. Apply the patch, reindex with:
sudo koha-elasticsearch --rebuild -r -a kohadev
3. Repeat the test. You should see 'UK Archiving' on the result list.
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit d4c70f7d07dcc0fe1319b6e0380abcd1b7400b95) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Kyle M Hall [Wed, 20 Mar 2024 19:32:50 +0000 (15:32 -0400)]
Bug 36378: Cannot stay logged in if AutoLocation is enabled but branch ip is not set correctly
We can get into a scenario what a user cannot stay logged in for more than a single page load.
If AutoLocation is enabled with branch IP addresses being set to a space, you will be logged out with every page load.
Test Plan:
1) Set your branch ip to a space
2) Enable AutoLocation
3) Restart all the things!
4) Log out
5) Log in
6) Browse to another page
7) You are logged out
8) Apply patch
9) Repeat 1-6
10) You are not logged out!
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 7291a312332e4fac7ac61288f33a001d4a7b306c) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
danyonsewell [Fri, 10 May 2024 02:40:45 +0000 (02:40 +0000)]
Bug 36723: Add musical presentation to Elasticsearch index mappings
Testing plan:
1. Start up KTD with Elasticsearch: ktd --es8 up
2. Apply the patch and restart everything (restart_all).
3. Reset the mappings: Administration > Catalog > Search engine configuration (Elasticsearch) > Reset mappings (at the bottom of the page)
4. Reindex: koha-elasticsearch --rebuild -d -b -a kohadev
5. Alternative to steps 3 and 4: reset_all
6. Update the visibility for 254$a in the default framework so that it is visible in the Editor (OPAC, Staff interface should already be selected).
7. Add a new record using the default framework and put a term in 254$a, such as 'Full score'.
Sponsored-by: Education Services Australia SCIS Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit fffb3665eadec04792b055e9ba04152b3b36d6dd) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Lucas Gass [Wed, 6 Mar 2024 18:41:04 +0000 (18:41 +0000)]
Bug 34823: Do not show Item group dropdown if there are no item groups
To test:
1. Enable EnableItemGroups and EnableItemGroupHolds
2. Go to the OPAC and log in as a patron
3. Go to any record that doesn't have grouped items and try to place a hold
4. Click on "Show more options"
5. See "Request specific item group:" and dropdown
6. APPLY PATCH
7. Try again, this time if the record has no item groups you should not see the dropdown at all.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit be98d633be1fb34f52ccc8b57b18280856cf1d1a) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Matt Blenkinsop [Fri, 10 May 2024 13:13:20 +0000 (13:13 +0000)]
Bug 36827: Fix tab formatting
This patch removes unwanted whitespace between the tabs and the tab content
Test plan:
1) Enable the ERM module and navigate to the eUsage > Reports sections
2) Observe the whitespace between the tabs and the content
3) Apply patch and run yarn build
4) Hard refresh the page, the whitespace should be gone
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 11cdeb0889ecd4b2827690a6e7df45c912f2a9e1) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Matt Blenkinsop [Fri, 10 May 2024 13:18:45 +0000 (13:18 +0000)]
Bug 36828: Remove commented out code
Test plan:
1) Look at the patch diff and observe that the commented out code has been removed
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit f3af09c78cbec3e091164e71f74c97bcb90f9978) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Wed, 20 Mar 2024 15:04:14 +0000 (16:04 +0100)]
Bug 36370: Add ContentWarningField to UNIMARC XSLT
Bug 31123 added new feature with preference ContentWarningField.
Add this behavior to UNMARC XSLT files.
This patch adds new template 'tag_content_warning' in UNIMARCslimUtils.xsl
called in results and details pages.
New field is placed after 3xx.
Test plan (in both interfaces OPAC and staff):
1) Create a new field 599 in framework
2) Set system preference ContentWarningField to 599
3) Edit a record to add a 599 with text in $a$b and an URL in $u
4) Perform a search to find this record
=> Check you see content_warning: <a href="$u">$a</a> $b
5) Click on details page
=> Check you see content_warning: <a href="$u">$a</a> $b
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 274c0bee86be52c9c66c0df3fccdd45c0c271977) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 36794: Illegitimate modification of biblionumber subfield content (999 $c)
It happens that librarians, by mistake, open a biblio editor putting in the
URL, by hand, the biblionumber prefixed with a blank (e.g.
.../addbiblio.pl?biblionumber= 123 -- mind the space before 123).
In such a case the editor opens with the right biblio record (i.e. 123)
but, after saving the record, the content of the biblionumber MARC
field (999 $c for a standard MARC 21 installation) results modified and
contains additional initial blanks.
Moreover, while using ES and making a search for the record (with title,
author etc.) we get two records on the result list (instead of one).
This is because in the addbiblio.pl script $biblionumber is taken (and
continuously used) directly from CGI parameter, without any
validation and/or correction.
Test plan:
==========
0. Have a test installation with ES.
1. Open a biblio record in the editor with an added space before
biblionumber value, e.g.:
http://ktd:8081/cgi-bin/koha/cataloguing/addbiblio.pl?biblionumber= 123
Save the record.
2. From the Normal view choose Save -> MARCXML. Open the saved file in
your favourite editor. You should see, at the end, something like:
<datafield tag="999" ind1=" " ind2=" ">
<subfield code="c"> 123</subfield>
(mind the space before 123).
This is not right.
3. Make a search with the title or author's name from the record (e.g.
Henning Mankell for the record 123 from the default ktd data set).
You should get two records instead of one (while using ES).
4. Apply the patch, restart_all. Repeat p. 1 and 2 with a different
biblionumber. Notice the unchanged (i.e. without spaces) value
of 999 $c subfield in the exported record and only one record
as a result of a search.
WNC amended patch - rebased, added conditional in case no bib, moved comments to their own lines
Sponsored-by: Ignatianum University in Cracow Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c74169ba27c2e12473239b15358e428bc05da9f5) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 36799: Illegitimate modification of MARC authid field content (001)
It happens that librarians to save time open an authority editor by putting
in the URL, by hand, the authid prefixed, by mistake, with a blank (e.g.
.../authorities.pl?authid= 100 -- mind the space before 100). In
such a case the editor opens with the right auth record (i.e. 100) but,
after saving the record, the content of the authid MARC field (001 for
a standard MARC 21 installation) results modified and contains
additional initial blanks.
Moreover, if the heading (1XX field) was modified in the authority record
during such an edit, the changes will not propagate to the linked
bibliographic records. And won't in the future.
This is because in the authorities.pl script $authid is taken (and
continuously used) directly from CGI parameter, without any
validation and/or correction (line 540 in the current main branch).
Test plan:
==========
1. Open an auth record in the editor with an added space before
authid value, e.g.:
http://ktd:8081/cgi-bin/koha/authorities/detail.pl?authid= 100
Modify the heading field -- in the ktd data set:
150 Computerized typesetting
Save the record.
2. a) Open the record for editing again--see the space added before
the authid in field 001. Close the editor (with Cancel).
b) Try to go to the linked biblio records with Used in X records.
Note no results, if using ES.
c) Remove the space before authid (after an:) in the URL.
Go to the linked biblio records. See that the content of
the field controlled by the modified auth record did not
update.
3. Apply the patch; restart_all.
4. Repeat p. 1 and 2 with a different authid. Everything should
be OK now.
Sponsored-by: Ignatianum University in Cracow Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4b66fbc4ebc0fe706f9a9b9057a19ee0c1b13aa3) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 33849: Do not reset new patrons home library when error occurs
While adding new patron, if patron is flagged as duplicate
or another error occurs and their home library differs from
library user is logged in, patrons home library resets as
logged in users library. This happens with all patrons
expect those with category type C. This patch removes checking
if patrons category type is C from code so that all category
types use previously chosen home library even if error occurs.
To test:
1. Add new patron and set their library to a different
library than the one you're logged in.
2. Cause an error (wrong age, duplicate etc) while saving.
3. Attempt to save.
=> Note that patrons home library is set as one you're
logged in.
4. Apply this patch.
5. Repeat steps 1 to 3.
=> Note that patrons home library hasn't changed.
Sponsored-by: Koha-Suomi Oy Signed-off-by: Esther <esther@bywatersolutions.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit d2f41df188c3d8e8d8705c6a5ceb583e3e29e629) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 42d95f362a89c9c2236220f6b961b1748792087f) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 35149: Add Option to ignore submit of checkout field when empty
1) Apply patch
2) Set CircAutoPrintQuickSlip to "do nothing"
3) Go to the checkouts form for a specific patron
4) Submit the form with empty value
5) Verify that no action is taken and you stay on the current page
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3d030ded6bc3d60b6a6e0ca8c6c648b5bb167e0e) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Lucas Gass [Tue, 7 May 2024 16:03:54 +0000 (16:03 +0000)]
Bug 36797: Change WHILE loop into FOREACH
To test:
1. Find a record that has 1000 non-waiting holds with different priorities.
2. Try loading the reserve page for that record ( /reserve/request.pl?biblionumber=X )
3. Error: Template process failed: undef error - WHILE loop terminated (> 1000 iterations)
4. APPLY PATCH
5. Try again, this time the page should load.
6. Try testing on a record with less than 1000 holds, making sure the priorities are still set right.
7. Make sure you can change your priorities and everything works right.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5cc42c162c51aa3624f5e46e2ad6c70dd5ee6f01) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Fridolin Somers [Mon, 29 Jan 2024 09:08:00 +0000 (10:08 +0100)]
Bug 35927: Selecting MARC framework again doesn't work when adding to basket from an external source
Like Bug 19372, selecting MARC framework currently doesn't work when adding to basket from an external source.
Strangly I can reproduce on koha-testing-docker, but we have this issue with a Ubuntu Focal install.
Looks like it comes from a bad syntaxe than needs to be replaced in any case.
Test plan:
1) Add an order to a basket from an external source
2) Select another framework than the default one on the search result
view. Before doing 'add order' on choosen search result line.
3) Chek the framework code you will pick will be used in the created biblio record
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit b7a5cc5beeb4af7cd23a414519c038f007f5b959) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 34041: (follow-up) escape double dashes to prevent issues
Having double dashes inside a commmented block is not valid XML. This
patch restores it, with an added message explaining it
To test:
1. Run:
$ xmllint etc/z3950/config.xml
=> FAIL: You get:
etc/z3950/config.xml:5: parser error : Double hyphen within comment: <!--
<config>
<z3950_responder_options>
<z3950_responder_options>--add-item-status k -t 5</z3950_responder_options
2. Apply this patch
3. Repeat 1
=> SUCCESS: All good!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 11c69496bcd216ad264acd87409e5160c73995bf) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Liz Rea [Fri, 16 Jun 2023 17:50:35 +0000 (12:50 -0500)]
Bug 34041: z3950 responder additional options not coming through properly
This patch adds the <config> node that the z3950 responder starter script is looking for in the z3950/config.xml to the example code.
To test:
- verify that the <config> </config> is around the commented z3950_additional_options suggestion in the etc/z3950/config.xml file
- copy the config stanza to the live file: /etc/koha/sites/kohadev/z3950/config.xml
- restart_all
- ps aux | grep z3950
- confirm the script has restarted
- confirm the options: --add-item-status k -t 5 have been passed through
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3878dbe9994186d70b3eb94e5096d4d1c6cf5452) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Thibaud Guillot [Thu, 21 Mar 2024 08:25:08 +0000 (09:25 +0100)]
Bug 36380: Add filter value on patron statistics report summary
Test plan:
1) Go to reports and select "Patrons"
2) Select some filters (patron category, library,..) and run it
3) Normally you will see filters selected but with blank value like
"branch code = "
4) Apply this patch
5) Refresh
Jan Kissig [Tue, 23 Apr 2024 18:19:05 +0000 (20:19 +0200)]
Bug 36676: SIP2 drops connection on unknown patron id in fee paid message
When sending a fee paid message to SIP2 with an unknown patron id it will respond with an empty response followed by dropping the connection to a client.
Test plan:
a) perl /usr/share/koha/bin/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su term1 -sp term1 -l CPL --patron 2352900100046 -m fee_paid --fee-type FT --fee-amount 0.01
Output:
Trying 'fee_paid'
SEND: 3720240423 124447FT00USDBV0.01|AO|AA2352900100046|ACterm1|
Use of uninitialized value $data in concatenation (.) or string at /usr/share/koha/bin/sip_cli_emulator.pl line 355, <GEN0> chunk 1.
READ:
b) apply patch
c) perl /usr/share/koha/bin/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su term1 -sp term1 -l CPL --patron 2352900100046 -m fee_paid --fee-type FT --fee-amount 0.01
Output:
Trying 'fee_paid'
SEND: 3720240423 125602FT00USDBV0.01|AO|AA2352900100046|ACterm1|
READ: 38N20240423 125602AO|AA2352900100046|AFInvalid patron barcode.|
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit d59e148879c0495f5071998d4521875e9c9022ed) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Janusz Kaczmarek [Thu, 21 Mar 2024 15:20:24 +0000 (16:20 +0100)]
Bug 36388: Mouse operation does not work in draggable fields in authority editor
When using the authority editor in Firefox, it is not possible to set
the cursor or select text from the text field.
This patch mimics the corrections made in bug 35425 for biblio editor.
Test plan:
==========
1. Start editing an existing authority record and try to put the cursor
with the mouse in the middle of the content of any subfield or to
select text with the mouse. It should not be possilbe.
2. Apply the patch (reload plack etc.).
3. Repeat p. 1 - everything should work as expected.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 6e09fb6ad8eaab2e219c01cc332b404ad89088c0) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Phil Ringnalda [Thu, 2 May 2024 23:19:17 +0000 (16:19 -0700)]
Bug 27363: Restore temporary selection of Z39.50 targets throughout multiple searches
The advanced editor currently saves which Z39.50 servers are selected
in local storage using the index in the sorted array of servers, and
then misreads them back as though they were server_ids. We want them to
be server_ids, since that's immutable and the index can change with
changes in rank or server name.
We use the data-server-id property in the HTML more often as a server_id
than as the index that's currently stored there, so this patches
switches it back to be the server_id, and in the one place we would use
the index, instead uses Array.find to just get the server object instead
of referencing it by index.
Test plan:
1. Set the preference EnableAdvancedCatalogingEditor to enable
2. Administration - Z39.50 Servers, for NATIONAL LIBRARY OF FRANCE
uncheck "Preselected"
3. To be sure you don't have confusing saved preferences, open
Firefox's Developer Tools, in the Storage tab open Local Storage and
select your URL
4. In the row for cateditor_preferences_{your Koha user id}, if there
are any values for selected_search_targets, delete them so you
have "selected_search_targets":{}
5. Open the advanced editor, and click "Advanced »" in the search box
6. You should have Local catalog unchecked, LIBRARY OF CONGRESS checked
because it is preselected, and NATIONAL LIBRARY OF FRANCE unchecked
7. Toggle each checkbox so Local catalog and France are selected, and
LoC is unselected.
8. In a new broser tab, open the advanced editor, and click "Advanced »"
9. You will see Local catalog unchecked, LoC checked, and France
unchecked.
That's the bug.
10. Apply patch, open the advanced editor in a new tab, click "Advanced »"
11. Toggle the checkboxes so Local catalog and France are selected, and
LoC is not selected.
12. Open the advanced editor in another new tab, click "Advanced »"
13. You should see what you just set, Local catalog and France checked,
and LoC unchecked, That's the correct behavior.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit a8f4fe946cbafd46621a7a94812580ce0104fe7e) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Pedro Amorim [Tue, 7 May 2024 15:46:23 +0000 (15:46 +0000)]
Bug 36804: Fix clear filter
1) Visit serials and click "New subscription":
http://localhost:8081/cgi-bin/koha/serials/serials-home.pl
2) Enter '112' on the record input and '1' on the vendor input. Click "Next"
3) 'First issue publication date' -> Enter some date in the past
4) 'Frequency' -> Enter '2/day'
5) 'Subscription start date' Same as step 3)
6) 'Subscription end date' Some date in the future
7) 'Numbering pattern' -> Enter 'Number'
8) Click 'Test prediction pattern'. Click 'Save subscription'
9) On the left side menu -> Click "Serial collection". Click the yellow button 'Edit serials'
10) On the first serial, edit the status to 'Late'. Save.
11) Visit serials claims:
http://localhost:8081/cgi-bin/koha/serials/claims.pl?supplierid=1
12) Input some dates in "From" and "To"
13) Click 'Clear filter'. Notice it doesn't work.
14) Apply patch. Repeat.
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e6b778b5d49cffcb33ccfa30542c4271d35e60e9) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Pedro Amorim [Fri, 3 May 2024 14:07:25 +0000 (14:07 +0000)]
Bug 36774: Remove wrapper if already exists
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c6e2995d278df289065a32f19af7ca9b9226d3ea) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Thu, 11 Jan 2024 11:53:42 +0000 (11:53 +0000)]
Bug 34360: Get distinct biblionumber
This fixes the problem noted in the bug:
[WARN] DBIx::Class::ResultSetColumn::new(): Attempting to retrieve non-unique column 'biblionumber' on a resultset containing one-to-many joins will return duplicate results. at /usr/share/koha/Koha/Objects.pm line 421
We are taking a list of items, assuming the scenario is that these are from a single biblio and possibly some host_items, then searching and ordering conditionally on whether the biblio is a serial.
Current code gets the first biblio from the list - this patch adds a 'DISTINCT' to the results ebfore fetching the column
To test:
1 - Find a biblio in the staff interface
2 - Transfer one of the items a few times
3 - Recreate the issue on the command line:
export DBIC_TRACE=1
perl -e 'use Koha::Items; my $items = Koha::Items->search({biblionumber=>9})->search_ordered(undef,{ prefetch => ['issue','current_branchtransfers'] }); $items->next'
4 - Note warning:
DBIx::Class::ResultSetColumn::new(): Attempting to retrieve non-unique column 'biblionumber' on a resultset containing one-to-many joins will return duplicate results. at /kohadevbox/koha/Koha/Objects.pm line 426
5 - Apply patch
6 - Repeat 3
7 - Error is gone
Signed-off-by: baptiste <baptiste.bayche@inlibro.com> Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit b5388933b64b78ce22b058dd1e5b96e1c0ec78a0) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Katariina Pohto [Thu, 2 May 2024 11:27:06 +0000 (14:27 +0300)]
Bug 36534: Batch operations when using limit in report
When report results number exceeds the result per page limit, batch
operations link reads "Batch operations with (page limit) records" even
if there are more or less shown records (more when using limit in SQL or
less in the last page of result). This patch fixes the link text to
actual shown records.
To test:
1) Create a report of items with a limit of e.g., 26.
2) Run report.
3) See that number of results shown exceeds 20 but the link says "Batch
operations with 20 visible records".
4) See that the second page shows 6 results but the link is still for 20
records.
5) Apply patch.
6) Run report again.
7) See that the link texts will show correctly 26 records on the first
page and 6 records on the second.
Signed-off-by: Owen Leonard <oleonard@myacpl.org> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e9356afd9f7e8ee16165341b8009282ff9ab3ff3) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Lucas Gass [Wed, 24 Apr 2024 17:05:18 +0000 (17:05 +0000)]
Bug 36687: Update itemtypes.notforloan to not allow NULL values and change to tinyint(1)
To test:
1. Have some itemtypes.notforloan values set to NULL.
2. APPLY PACTH, updatedatabase, restart_all
3. When you updatedatabase those values should be set to 0.
4. Try updating an itemtypes.notforloan value to NULL. You cannot.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit d267e2fe174506ed066b1810659bf9dcf87681b0) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
David Nind [Tue, 7 May 2024 05:41:54 +0000 (05:41 +0000)]
Bug 36796: (follow-up) Fix column descriptions for the statistics table
This follow-up to bug 32312 fixes the descriptions for the statistics
database columns, used in guided reports.
It removes the duplicate statistics section in Koha/Database/Columns.pm
so that descriptions are displayed for all columns, as originally
intended.
It also adds a description for the interface column (a new column added
after the original patch was pushed).
Test plan:
1. Go to Reports > Guided reports > Create guided report.
2. Choose 'Circulation' for the module to report on and select
'Next'.
3. Choose 'Tabular' for the type of report and select 'Next'.
4. Scroll down to the statistics table section and note that some
columns have descriptions and some don't:
Statistics date and time / statistics.datetime
Library / statistics.branch
Value / statistics.value
Type / statistics.type
Item number / statistics.itemnumber
Item type / statistics.itemtype
statistics.other
statistics.location
Borrower number / statistics.borrowernumber
statistics.ccode
statistics.categorycode
statistics.interface
5. Apply the patch.
6. Restart all the things (restart_all).
7. Repeat steps 1 to 4.
8. Scroll down to the statistics table section again and note that all
columns now have descriptions:
Statistics date and time / statistics.datetime
Library / statistics.branch
Value / statistics.value
Transaction type / statistics.type
SIP mode / statistics.other
Item number / statistics.itemnumber
Koha item type / statistics.itemtype
Shelving location / statistics.location
Borrower number / statistics.borrowernumber
Collection / statistics.ccode
Patron category / statistics.categorycode
Interface / statistics.interface
9. Sign off :D
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 7cc445e95cc7ba5130fc0efbca863f858d4269ee) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Janusz Kaczmarek [Tue, 30 Apr 2024 10:18:12 +0000 (10:18 +0000)]
Bug 36730: (Bug 35428 follow-up) po files (sometimes) fail to update
Under some circumstances (e.g. non-standard disk latency) po files fail
to be generated. The output from the gulp po:update --lang xx-XX task
is than like this:
[10:01:39] 'po_update_staff' errored after 6.41 s
[10:01:39] Error: ENOENT: no such file or directory, open '/tmp/koha-5WCc9s/Koha-staff-prog.pot'
This is due to the time dependencies inside the function flush (callback)
(in the function xgettext) in gulpfile.js. It happens that the
/tmp/koha-NNNNNN folder gets deleted before the asynchronous callback
function called by fs.readFile is completed. The callback should copy
the content of the .pot file from /tmp/koha- to its final destination,
while, in parallel in fact, the folder inside /tmp is being removed.
This creates a race condition.
Test plan:
==========
Hard to reproduce. But the race condition found in the code should
be obvious.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 67b3cbd438f0cee378cfa5236f2673ab6ea32f33) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Janusz Kaczmarek [Tue, 14 Mar 2023 13:22:27 +0000 (14:22 +0100)]
Bug 36554: Document languages from field 041 should be present in 'ln' search field and Languages facet (MARC 21)
In Elasticsearch, the field 041 (subfields: a, d, e, i, j)
is not indexed with 'ln' search field. As a result, records cannot
be found when searching with languages present in 041 (but only
with the one from 008/35-37), and the languages are also missing
from the facet.
Subfields content (only relevant subfields):
$a - Language code of text/sound track or separate title
$d - Language code of sung or spoken text
$e - Language code of librettos
$i - Language code of intertitles
$j - Language code of subtitles
Test plan
=========
0. Have a test installation with Elasticsearch.
1. In ktd with its test data, make a biblio search for a language present
in 041 a/d/e/i/j but not in 008/35-37, e.g. for Japanese (with ln:jpn
or from Advance search). You will get no results.
2. Apply the patch, reindex with:
sudo koha-elasticsearch --rebuild -r -b kohadev
3. Repeat the test. You should get some records and also you should see
the Japanese language in the Languages facet.
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit d90c2a44e7506ec47a4f9481a1b8693b99244ecb) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Owen Leonard [Thu, 29 Feb 2024 16:36:34 +0000 (16:36 +0000)]
Bug 36390: Two minor OPAC CSS fixes
This patch makes corrections to OPAC CSS to address two small issues.
To test, apply the patch and rebuild the OPAC CSS.
- Perform a catalog search which will return multiple results..
- In the table of search results, check the icon and text for the
controls under each title: "Place hold", "Add tag", "Add to cart" etc.
- The colors should be consistent, with a slightly darker blue for the
icons.
- Scroll down until the table header "sticks" to the top of the
viewport.
- There should be no gap between the header row with the pagination
links and the row with the "Select all", "Clear all", etc. controls.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 09119cf9c51e098db891002035213f250f635077) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Lucas Gass [Mon, 12 Feb 2024 22:03:38 +0000 (22:03 +0000)]
Bug 36074: Add classes to materials specfied message on check in and checkout when CircConfirmItemParts is on.
To test:
1. APPLY PATCH
2. Set CircConfirmItemParts to 'Require'.
3. Add a materials specified message to an item. ( 952$3 )
4. Add the following CSS to your IntranetUserCSS:
5. Checkout that item. Notice the message should be green and the label (Note about the accompanying materials:) should be purple.
6. Check in that item. Notice the message should be green and the label (Note about the accompanying materials:) should be purple.
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 6f8ef2b0c0788f71e821f2c56fc87c5a7173e081) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Lucas Gass [Thu, 21 Mar 2024 16:37:13 +0000 (16:37 +0000)]
Bug 31981: Add classes to each NEEDSCONFIRM message in circ/circulation.tt
This patch adds a 'needsconfirm' class and a unique class to each NEEDSCONFIRM message on circ/circulation.tt to make these easier to style individually.
To test:
1. APPLY patch
2. Review the diff to see each of the NEEDSCONFIRMATION messages.
3. Add some CSS to IntranetUserCSS like this:
4. Place a hold on an item for Patron A, do not trigger the hold, and check the item out to Patron B. The message background is blue.
5. Then check the item in, confirm the hold, then check the item out to Patron B. The message background is orange
6. Check something out that is already checked out to that patron, message background is lime green.
7. Have too much debt and check something out to a patron, message is red.
Note: There are plenty more NEEDSCONFIRMATION messages but I don't think we need to test every single one.
Note: These background colors are more testing purposes only. Signed-off-by: Donna <donna@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 2c8196cc077501d1b970f1077f94fd3f25b1385a) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Hammat Wele [Thu, 21 Mar 2024 22:53:26 +0000 (22:53 +0000)]
Bug 36393: Renewal with a specific date does not take the new date due that we pick
When we renew a notice with a specific date and we have to override the limit, the new date due is not the date that we picked
To reproduce
1- Log in to the staff interface
1-1. Make sure you have a ciculation rule that allows you to renew
1-2. set the AllowRenewalLimitOverride system preference to Allow and SpecifyDueDate to Allow
2. Check out the item to a Borrower
5. Access the borrower's account and renew it until the limit is reached and note the due date.
6. Go to Circulation, click Renew
7. Enter the item barcode and choose a due date further than the due date from step 5 and submit
8. Click on Override limit and renew button
---> Note that the new date due is not the date that we picked in step 7
9. Apply the patch
10. Repeat step 6, 7 snd 8
---> Note that the new date due is the date that we picked
Signed-off-by: Anneli Österman <anneli.osterman@koha-suomi.fi> Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c29e4ef1f1cda011867ba69207e4a0a0a74c829d) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Magnus Enger [Mon, 5 Feb 2024 08:12:29 +0000 (08:12 +0000)]
Bug 35954: Add --status to koha-plack
This adds a --status switch to the koha-plack command.
To test on ktd:
- Copy the script to /usr/sbin, so you run the modified script,
and not the one installed by Koha:
$ sudo cp debian/scripts/koha-plack /usr/sbin/
- Stop and start Plack for kohadev like so:
$ sudo koha-plack --stop kohadev
$ sudo koha-plack --start kohadev
And make sure this reports the correct status, both when Plack
is running and when it is not running:
$ sudo koha-plack --status kohadev
- Make sure --status is mentioned here:
$ sudo koha-plack --help
- See https://wiki.koha-community.org/wiki/Testing_man_pages for
details on how to check the manual page for the command
Signed-off-by: Tadeusz Sośnierz <tadeusz@sosnierz.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit ccd4738e26ef3c2e40bfa1dc1e74dfdb94a34239) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Lucas Gass [Wed, 10 Apr 2024 11:56:01 +0000 (11:56 +0000)]
Bug 36137: Make update_totalissues cron always skip the holds queue
To test:
1. Run the update_totalissues cron, the holds queue is updated.
2. APPLY PATCH, restart services
3. Run update_totalissues cron again, this time the holds queue should always be skipped.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com> Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 307acdf96b28c722a0027c1eeadb4c98ab38eeef) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Janusz Kaczmarek [Thu, 11 Apr 2024 09:21:42 +0000 (09:21 +0000)]
Bug 36574: Canceled/invalid ISBN not indexed by ES for MARC 21
For MARC 21, canceled/invalid ISBNs (subfield 020 $z) are not being
indexed in Elasticsearch (search fields identifier-standard and isbn),
but it is for UNIMARC (subfield 010 $z). As a result, a user searching
for such an ISBN (e.g. with wrong checksum--and therefor put in 020 $z)
will not find the record in the catalogue.
A new isbn-all Elasticsearch search field 'isbn-all' has been created with
020az (MARC 21, and 010az for UNIMARC), 010z has been removed from isbn
search field for UNIMARC, and 020z has been added to identifier-standard
search field.
Test plan
=========
0. Have a test installation with Elasticsearch.
1. In ktd with its test data, make a biblio search for a cancelled ISBN
e.g. 9780007269854. You will get no results.
2. Apply the patch, reindex with:
sudo koha-elasticsearch --rebuild -r -b kohadev
3. Repeat the test. You should get "The ice princess / Camilla Läckberg".
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 915d585b50868c878e492b2ce7d60f92fd3e8e87) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 36567: Get rid of Datetime warning in Circulation.t and dateexpiry.t
Running either t/db_dependent/Circulation.t or t/db_dependent/Circulation/dateexpiry.t
cause following error to be dispalyed:
You are creating a DateTime object with a far future year (9999) and a time
zone (Europe/Helsinki). If the time zone you specified has future DST changes
this will be very slow.
Smallest allowed value is 4999, so we need to use that rather than 9999 in tests.
To test prove t/db_dependent/Circulation.t and t/db_dependent/Circulation/dateexpiry.t.
Sponsored-by: Koha-Suomi Oy Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit f5e9f9634fd0d3ea1d06ca24141cb10660a2cf66) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Julian Maurice [Thu, 4 Apr 2024 14:26:00 +0000 (16:26 +0200)]
Bug 36526: Remove circular dependency from Koha::Objects
Koha::Objects depends on Koha::DateUtils, which depends on C4::Context,
which depends on Koha::Config::SysPrefs, which depends on Koha::Objects
Apart from the circular dependency, the dependency on C4::Context alone
is problematic as it loads a bunch of modules that are not needed at all
in Koha::Objects (YAML::XS and ZOOM for instance).
As Koha::Objects is used as a base for a lot of modules, we should take
care to only load the minimum required.
This patch removes uses of Koha::DateUtils from Koha::Objects.
It was only used in Koha::Objects::filter_by_last_update
filter_by_last_update now requires that the 'from' and 'to' parameters
must be DateTime objects. Previously it would also allow date and
datetime strings. This possibility was only used in two places:
* misc/cronjobs/cleanup_database.pl
* tools/cleanborrowers.pl
Now they call dt_from_string first and pass a DateTime object to
filter_by_last_update
Test plan:
1. Run `perl -cw Koha/Objects.pm`. It should only say:
"Koha/Objects.pm syntax OK" without warnings
2. Run `prove t/db_dependent/Koha/Objects.t`
3. Verify that misc/cronjobs/cleanup_database.pl works as before,
especially with the options --pseudo-transactions,
--pseudo-transactions-from and --pseudo-transactions-to
4. Go to Tools » Batch patron deletion and anonymization, check "Verify
you want to anonymize patron checkout history" and enter a date in
the text input below. Then click Next and verify that the correct
count of borrowers is shown. Click on the "Finish" button and verify
that the circulation history has been correctly anonymized
See also bug 36432
Signed-off-by: Tadeusz Sośnierz <tadeusz@sosnierz.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 675c8263b707c8e1987ac6084272b355deb1b05c) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Emily Lamancusa [Sun, 24 Mar 2024 20:07:16 +0000 (16:07 -0400)]
Bug 35559: Correctly parse previous flatpickr date
The Flatpickr configuration for futuredate and futuredateinclusive is
meant to allow the preexisting date, even if it is in the past, to avoid
data loss. As of Bug 30718 - Use flatpickr's alt option everywhere,
that incoming date is in yyyy-mm-dd format, not the configured
human-readable format, and needs to be parsed accordingly.
To test:
1. Place 2 holds on the same bib, both with an expiration date set
2. Set the expiration date for one of the holds to a date in the past
(e.g., in Koha Testing Docker, use the commands:
ktd --shell
koha-mysql kohadev
to access the database directly)
3. Reload the holds tab for that bib
--> Note that the future expiration date will be editable, and the past
expiration date will not be editable
4. In a new tab, go to Administration > Patron Categories
5. Edit one patron category to have an enrolment period date in the future
6. Edit another patron category to have an enrolment period date in the
past (e.g. by accessing the database directly, as above)
7. Reload the Edit pages for each of the above categories (in new tabs)
--> Note that the future enrolment period date will be retained in the
date field, but the past enrolment period date will be blanked out
8. Apply this patchset
9. Refresh the holds tab from step 3
--> Note that both expiration dates are now editable
10. Refresh the 2 patron category tabs from step 7
--> Note that both enrolment dates are now retained correctly
11. Open the date picker on one of the date fields that has a past date
--> Note that other past dates, besides the existing date, are prevented
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 54d884819121ecb18930bbf250dfbb21fc7ecb93) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Jonathan Druart [Wed, 17 Apr 2024 10:33:24 +0000 (12:33 +0200)]
Bug 36614: Restore 'phone' on the main patron search
It disappeared at some point (history is tricky here, I didn't manage to
track down what happened, it's a mess)
This patch adds a phone column after the "name and address" one. It's
hidden by default.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com> Signed-off-by: Nick Clemens <nick@bywatersolutions.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit d4bea3f9c84d97225efc0e07d7f6b9390d86d0d8) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Nick Clemens [Tue, 23 Apr 2024 18:57:54 +0000 (18:57 +0000)]
Bug 36678: Index fields with non-filing characters in both versions
Currently we only remove non-filing characters for sort fields, however, this can make searching difficult.
This patch adds the filing form to the index as well to aid in searching.
To test:
0 - Setup Koha with Elasticsearch
1 - Import the sample record on this report: "L'amour de l'art"
2 - Search for "amour de l'art" - no results
3 - Apply patch
4 - Reindex
5 - Search for "amour de l'art" - result!
6 - Search for "title:amour de l'art" - result!
Signed-off-by: David Nind <david@davidnind.com> Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com> Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 7c20263fd0930997a8da70b8798e0ada623ac2bc) Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
projects / koha.git / log