]> git.koha-community.org Git - koha.git/log
koha.git
7 years agoBug 16749: Check instancename in adjust_paths_dev_install
Marcel de Rooy [Thu, 16 Feb 2017 13:33:57 +0000 (14:33 +0100)]
Bug 16749: Check instancename in adjust_paths_dev_install

Check if the instance does not exist (or was not even passed).

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 16749: Use is_instance to make sure the dev instance exist
Jonathan Druart [Thu, 16 Feb 2017 12:57:17 +0000 (12:57 +0000)]
Bug 16749: Use is_instance to make sure the dev instance exist

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 16749: Go with a boolean flag, we love booleans
Marcel de Rooy [Mon, 13 Feb 2017 07:56:17 +0000 (08:56 +0100)]
Bug 16749: Go with a boolean flag, we love booleans

As requested by Jonathan on comment 10 on Bugzilla and supported by Tomas,
we should use the dev_install entry in koha-conf as a boolean flag.
Since we already used it as a path, this patch is not too strict about it.
If the entry is not empty and not equal to "0", we will interpret it as
a true value. The path is taken from the intranetdir entry.

Test plan:
[1] Copy debian/scripts/koha-functions.sh to /usr/share/koha/bin
[2] For a dev install:
    Remove the dev install line, or toggle its value between empty string,
    0 or 1 and each time test stop/start koha-indexer.
    Check the path to rebuild_zebra with ps aux|grep indexer.
    If you have no entry, an empty entry or a zero, you should see a regular
    path.
    (Note: You can do something similar with koha-start-sip.)
[3] For a regular install:
    Remove the dev install line.
    Stop/start koha-indexer or koha-plack, and verify that it still works.
    Add a dev_install line with 0, and repeat stop/start.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 16749: Update debian docs for koha-translate
Marcel de Rooy [Mon, 12 Sep 2016 09:51:22 +0000 (11:51 +0200)]
Bug 16749: Update debian docs for koha-translate

This patch adds the -d option to the documentation (with thanks to
Magnus Enger).

Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 16749: Adjustments for koha-translate
Marcel de Rooy [Thu, 16 Jun 2016 08:38:54 +0000 (10:38 +0200)]
Bug 16749: Adjustments for koha-translate

[AMENDED February 10, 2017]

[1] Added reading /etc/default/koha-common as in the other debian scripts.
    We need it for KOHA_HOME.
[2] Add a -d|--dev parameter for dev installs.
[3] No hardcoded PERL5LIB or KOHA_INSTALL_DIR (KOHA_HOME).
    They are read from default file or set by adjust_paths_dev_install.
[4] Adjust template paths for dev installs: OPAC_TMPL, INTRANET_TMPL.
[5] Remove references to obsolete themes ccsr and prog.

Test plan:
[1] Regular package install:
    Copy koha-translate to /usr/sbin.
    Run koha-translate -l to show installed languages.
    Run koha-translate -l -a to show available languages.
    Add a language: koha-translate -i nl-NL.
    Check template folders in regular location (/usr/share/koha/...)
    Remove a language: koha-translate -r nl-NL. Check again.
[2] Dev install or kohadevbox:
    Copy koha-translate to /usr/sbin.
    If needed, add the <dev_install> line to koha-conf.xml.
    Run koha-translate -l -d yourinstance to show installed languages.
    (Note: You only see the languages installed in this instance.)
    Add a language: koha-translate -i nl-NL -d yourinstance.
    Check template folders in the clone.
    Remove a language: koha-translate -r nl-NL -d yourinstance.

    Note: Make sure you have sufficient file permissions for the kohaclone
    files and koha-conf.xml. On kohadevbox you might need to run sudo
    koha-translate within the the vagrant user context.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested on Jessie (Debian VM and Kohadevbox)

Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 16749: Adjustments for koha-plack
Marcel de Rooy [Fri, 10 Feb 2017 09:33:57 +0000 (10:33 +0100)]
Bug 16749: Adjustments for koha-plack

[1] Use run_safe_xmlstarlet for plack workers and requests
[2] Simplify adjust_paths. The lazy export statement is actually enough to
    replace adjust_paths by one direct call to adjust_paths_dev_install.

Test plan:
[1] Copy koha-functions.sh and koha-plack:
    cp [YOUR_PATH]/debian/scripts/koha-functions.sh /usr/share/koha/bin/
    cp [YOUR_PATH]/debian/scripts/koha-plack /usr/sbin/
    where YOUR_PATH might well be /home/vagrant/kohaclone.
[2] Make sure that you have dev_install in koha-conf.
    Stop and start koha-plack. Verify with ps aux|grep plack.
[3] Rename dev_install to nodev_install (in start and end tag).
    Now stop/start koha-plack. Verify with ps aux|grep plack.
[4] Change plack_requests to 51 in your koha-conf.
    Restart Plack and check that you see 51 in ps aux|grep plack.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested on Jessie (Debian VM and Kohadevbox)

Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 16749: Adjust xmlstarlet calls in koha-functions
Marcel de Rooy [Fri, 10 Feb 2017 08:37:13 +0000 (09:37 +0100)]
Bug 16749: Adjust xmlstarlet calls in koha-functions

In various scripts we use xmlstarlet to extract values from koha-conf.
If we call xmlstarlet on non-existing entries in koha-conf, this may
however result in silently failing scripts (when set -e is in effect).

A function run_safe_xmlstarlet is added for situations where the entry
might not exist. It will not halt execution.

This patch only adjusts koha-functions.sh and modifies the xmlstarlet calls
for dev_install and zebra_loglevels.

Note: The function does not need to check file existence. If the file does
not exist, xmlstarlet warns about it; the function returns empty string,
but does not set an error exit status.

Test plan: See second patch ("koha-plack adjustments").

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Tested in a package installation of master+16749

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17990: Refactor Perl module versions check
Jonathan Druart [Wed, 25 Jan 2017 10:33:43 +0000 (11:33 +0100)]
Bug 17990: Refactor Perl module versions check

The code is duplicated, variable are not set ($_), code is hard to read,
not covered by tests and the subroutine has 2 completely different
behaviors depending on the presence of the "module" parameter.
No need more ti rewrite it.

Test plan:
- Use koha_perl_deps.pl with the different options (-u -m -a -i)
- Go on the about page, "Perl modules" tab

You should not see any differences from before and after this patch

Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17977: Add acquisitions sidebar menu to suggestions
Aleisha Amohia [Mon, 23 Jan 2017 22:41:15 +0000 (22:41 +0000)]
Bug 17977: Add acquisitions sidebar menu to suggestions

To test:
1) Go to Acquisitions -> Suggestions
2) Notice no acquisitions sidebar
3) Apply patch and refresh page
4) Sidebar menu should now show.

Sponsored-by: Catalyst IT
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17974 (QA Followup)
Nick Clemens [Thu, 16 Feb 2017 11:04:11 +0000 (11:04 +0000)]
Bug 17974 (QA Followup)

    Use the $biblio_rs variable

    In case of Koha::Object you can call new_from_dbic directly, however,
    it fails for Koha::Objects so using an intermediary variable should
    be done for consistency

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17974: Add the Koha::Item->biblio method
Jonathan Druart [Sat, 21 Jan 2017 15:45:34 +0000 (16:45 +0100)]
Bug 17974: Add the Koha::Item->biblio method

Test plan:
  prove t/db_dependent/Koha/Items.t
should return green

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
7 years agoBug 17973: Add the Koha::Checkout->item method
Jonathan Druart [Sat, 21 Jan 2017 15:47:03 +0000 (16:47 +0100)]
Bug 17973: Add the Koha::Checkout->item method

Test plan:
  prove t/db_dependent/Koha/Checkouts.t
should return green

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 5784 - Undo link in breadcrumbs
Kyle M Hall [Fri, 17 Feb 2017 12:10:15 +0000 (12:10 +0000)]
Bug 5784 - Undo link in breadcrumbs

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17972 - Reformat acquisitions sidebar menu with acquisitions and administration...
Owen Leonard [Mon, 23 Jan 2017 15:57:54 +0000 (15:57 +0000)]
Bug 17972 - Reformat acquisitions sidebar menu with acquisitions and administration sections

This patch makes changes to acquisitions-menu.inc so that the style
matches that of the Administration and Tools sidebar menus. The links
are now divided up between Acquisitions (/acqui/) and Administration
(/admin/). The link-highlighting JavaScript used elsewhere has been
added.

To test, apply the patch and view the Acquisitions home page.

- Check that the "Acquisitions home" link is highlighted (bold).
- Test the other Acquisitions links to confirm that highlighting works.
- Click any link in the Administration section of the sidebar menu.
- Confirm that everything looks correct and works correctly.

Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17959 - Add the Koha::Notice::Message[s] packages (message_queue table)
Jonathan Druart [Mon, 16 Jan 2017 13:46:26 +0000 (14:46 +0100)]
Bug 17959 - Add the Koha::Notice::Message[s] packages (message_queue table)

This just add Koha::Notice::Message[s] for later uses.

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17958: Add tests for Koha::Notice::Template[s]
Jonathan Druart [Mon, 23 Jan 2017 11:35:13 +0000 (12:35 +0100)]
Bug 17958: Add tests for Koha::Notice::Template[s]

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17958: Add Koha::Notice::Template[s] packages (letter table)
Jonathan Druart [Mon, 16 Jan 2017 13:10:09 +0000 (14:10 +0100)]
Bug 17958: Add Koha::Notice::Template[s] packages (letter table)

This just add Koha::Letter[s] for later uses.

Test plan:
  prove t/db_dependent/Koha/Notices.t
  should return green

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17962: Add Koha::Tmp::Order[s]
Jonathan Druart [Mon, 16 Jan 2017 13:10:22 +0000 (14:10 +0100)]
Bug 17962: Add Koha::Tmp::Order[s]

These packages should not be used outside the TT syntax scope.
A rewrite of Koha::Acquisition::Order[s] should be considered instead.

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17962: TT syntax for notices - Prove that ACQ_NOTIF_ON_RECEIV is compatible
Jonathan Druart [Mon, 16 Jan 2017 12:25:31 +0000 (13:25 +0100)]
Bug 17962: TT syntax for notices - Prove that ACQ_NOTIF_ON_RECEIV is compatible

To make ACQ_NOTIF_ON_RECEIV TT compatible, we need to expose data from
the aqorders table. We already have a package for it in the Koha
namespace but it is based on Koha::Object[s].
The other path creates dummy Koha::Tmp::Order[s] packages to make it
usable. Of course we should use a valid Koha::Acquisition::Order[s]
based on Koha::Object, but it's outside the scope of this bug report.

This notice template is quite simple, and it's a good one to start.
From C4::Acq::NotifyOrderUsers, GetPreparedLetter is called with 4
elements: the library, the patron to notify, the biblio and the order
information.
Note that prior to this patch aqorders was filled from GetOrder, which
retrieved a lot of information from the acquisition table (aqbasket,
aqbookseller). The idea with the TT syntax is to access the data from
where it really exists. So if a user wants to display the basket name,
[% order.basket.basketname %] should be used instead.
Note that this will not work at the moment, the basket method is not
defined in the order package.

However the basic template should work as before.
The test added to TemplateToolkit proves that.

Test plan:
Use the default ACQ_NOTIF_ON_RECEIV to notify a patron that an order has
been received.
That generated template should be exactly the same as prior to this
patch.

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17950: Merge.t: Improve variable handling at top level
Marcel de Rooy [Mon, 23 Jan 2017 10:40:48 +0000 (11:40 +0100)]
Bug 17950: Merge.t: Improve variable handling at top level

This patch does:
[1] Remove unused $dbh.
[2] Move all mocking statements to one sub.
[3] Promote a few lexicals to globals when used in the subtests.

Test plan:
Run t/db_dependent/Authorities/Merge.t

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17950: Improve quick UNIMARC fix in Merge.t
Marcel de Rooy [Mon, 23 Jan 2017 09:44:57 +0000 (10:44 +0100)]
Bug 17950: Improve quick UNIMARC fix in Merge.t

Bug 17909 and 17913 added a quick fix for Merge.t on UNIMARC records.
This patch improves that fix with the sub compare_fields, a merge from
compare_field_count and compare_field_order.
Also it adds the option to test MARC21/UNIMARC by adding a command line
switch that triggers mocking the marcflavour preference.
The test on a cleared field 609 in strict mode has been broken up in two
tests: first a count without 609 and then counting 609s only.

Note: Could have mocked GetMarcBiblio too, but decided to go this way.

Test plan:
[1] Run perl t/db_dependent/Authorities/Merge.t
[2] (For UNIMARC users:) Run perl Merge.t -flavour MARC21
[3] (For others:) Run perl Merge.t -flavour UNIMARC

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17948 Link to make a new list in masthead in OPAC does not take you straight...
Caitlin Goodger [Thu, 19 Jan 2017 23:31:16 +0000 (23:31 +0000)]
Bug 17948 Link to make a new list in masthead in OPAC does not take you straight to add form

Test Form
1: Go to OPAC and click on add new list.
2: It takes you to Your Lists and not straight to add a new list
3: Apply patch
4: Refresh and when you click on new list it should take you straight to
add a new list

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 14854: Add DataTables on upload results table
Aleisha Amohia [Tue, 14 Feb 2017 01:12:43 +0000 (01:12 +0000)]
Bug 14854: Add DataTables on upload results table

This patch adds datatables to the upload results table.
Tools -> Upload

To test:
1) Go to Tools -> Upload
2) Put any search term in search box, click Search
3) Confirm table shows as datatable and sorting works on all columns
EXCEPT Actions

Sponsored-by: Catalyst IT
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18068: ES - Fix location and (home|holding)branch facets
Tomas Cohen Arazi [Mon, 6 Feb 2017 19:22:51 +0000 (16:22 -0300)]
Bug 18068: ES - Fix location and (home|holding)branch facets

This patch makes the 'Locations' facet work as expected (i.e. having the
same behaviour it has for Zebra: picking the 952$c in MARC21 and 995e
for UNIMARC).

It also adds the code to handle holding and home library settings for
facets and makes the facets show the library name instead of the branch
code.

The mappings are updated so the labels match what facets.inc expect to
work properly.

To test:
- On master, do a search that returns biblios with items having
homebranch set.
=> FAIL: Under the 'Locations' label on the facets you will notice
branchcodes are shown.
- Apply the patch
- Restart memcached and plack (just in case, it was tricky)
- Reset your mappings:
  http://localhost:8081/cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
- Restart memcached and plack (again, not sure if needed)
- Make sure this mappings are set:
  homebranch => HomeLibrary
  holdingbranch => HoldingLibrary
  (Note: it might not be set due to the place the yaml file is being picked)
- Reindex your records:
  $ sudo koha-shell kohadev
 k$ cd kohaclone
 k$ perl misc/search_tools/rebuild_elastic_search.pl -d -v
- Repeat the initial search
=> SUCCESS: 'Location' contains the right stuff, 'Home libraries' and
'Holding libraries' too.
- Run
 k$ prove t/db_dependent/Koha_SearchEngine_Elasticsearch_Search.t
=> SUCCESS: Tests pass!
- Sign off :-D

Note: play with the 'DisplayLibraryFacets' syspref options.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18045: Fix Reserves.t tests - caching issues
Jonathan Druart [Thu, 2 Feb 2017 00:09:38 +0000 (01:09 +0100)]
Bug 18045: Fix Reserves.t tests - caching issues

If the cache has to be cleaned when marc structure is updated.

Before this patch, if the age restriction was not mapped, Reserves.t
failed with:
  Tag "" is not a valid tag. at t/db_dependent/Reserves.t line 523.

Test plan:
Just confirm that the tests still pass and that the changes make sense.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
It seems that only removing the key MarcSubfieldStructure- should be
enough, but it does not hurt either to remove those four keys.

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18136: Fix ExportRemoveFields pre-fill behaviour
Jonathan Druart [Fri, 17 Feb 2017 09:59:22 +0000 (10:59 +0100)]
Bug 18136: Fix ExportRemoveFields pre-fill behaviour

Looks like it's caused by bug 13190.
Variable export_remove_fields is not sent to the template, let's
retrieve the syspref's value using the TT plugin.

Test plan:
Fill ExportRemoveFields with something (100a for instance)
Go on a checkout list page
At the bottom, the "do not export fields" input box should be pre-filled
with the content of the syspref

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18025: Simplify logic and avoid 1 call to ValidateBorrowernumber
Jonathan Druart [Wed, 15 Feb 2017 17:14:11 +0000 (17:14 +0000)]
Bug 18025: Simplify logic and avoid 1 call to ValidateBorrowernumber

Signed-off-by: Liz Rea <liz@catalyst.net.nz>
This is fine with me.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18025: Fix test
Jonathan Druart [Wed, 15 Feb 2017 17:13:41 +0000 (17:13 +0000)]
Bug 18025: Fix test

Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Seems to work fine

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18025 - Expired password recovery links cause sql crash
Liz Rea [Tue, 31 Jan 2017 21:59:01 +0000 (21:59 +0000)]
Bug 18025 - Expired password recovery links cause sql crash

When a user gets an email, but doesn't act or visit it within two days,
     attempting to create a new one causes a collision. We should just
     delete the old one, assuming they still want to reset their
     password.

To test:
create yourself a borrower with a userid and password.
Attempt a password recovery on the OPAC
update the entry in the database for that user to have an expired token
e.g. update borrower_password_recovery set valid_until = '2017-01-25
03:25:26' where borrowernumber = 12;
Attempt another password recovery operation - should error
apply the patch
Try it again - no error, new token is generated and additional email
with new link is sent.

Issue reproduced - is resolved by patch
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17933: Do not instanciate a patron if not needed
Jonathan Druart [Thu, 19 Jan 2017 10:20:33 +0000 (11:20 +0100)]
Bug 17933: Do not instanciate a patron if not needed

Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17933: Add test and return unless defined dob
Jonathan Druart [Thu, 19 Jan 2017 10:13:36 +0000 (11:13 +0100)]
Bug 17933: Add test and return unless defined dob

Without this patch get_age return actually 0 instead of

Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17933 - Internal software error when searching patron without birth date
Dobrica Pavlinusic [Wed, 18 Jan 2017 16:12:30 +0000 (17:12 +0100)]
Bug 17933 - Internal software error when searching patron without birth date

When patrons don't have date of birth (which is not required) patron
search results on moremember page produce internal server error since we
can't convert MySQL invalid date 0000-00-00 to datetime object and
call strfdate on it.

Additionally, since we assign dates to template variables and after
than assign whole $data hash to template, later assigment overrides
previous one, so we see birth date field even for patrons which don't
have one.

This patch fixes both of those problems.

Test:
1. edit patron and remove it's birth date
2. try to search for it, and verify server error
3. apply patch
4. repeat search for patron and verify that it works and doesn't
   have enpty birth date field

Signed-off-by: Grace McKenzie <grace.mcky@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18119: Fix comment in cataloguing.js
Josef Moravec [Wed, 15 Feb 2017 06:52:32 +0000 (06:52 +0000)]
Bug 18119: Fix comment in cataloguing.js

Test plan:
Go to cataloging, and try something which depends on javascript -
collapse/uncollapse fields, open authority search window, ...
    -> without patch it is not working
    -> with patch it is working correctly

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17780: Add a comment to explain the line
Jonathan Druart [Wed, 15 Feb 2017 08:11:41 +0000 (08:11 +0000)]
Bug 17780: Add a comment to explain the line

Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17780 - When choose an author in authority results new window shows a blank screen
Oleg Vasylenko [Tue, 24 Jan 2017 15:58:39 +0000 (17:58 +0200)]
Bug 17780 - When choose an author in authority results new window shows a blank screen

Select2 (Bug 13501) introduced divs and inputs that broke some assumptions about the expected HTML structure.
This patch checks if input has name attribute, because some inputs in Select2 have not.

To test:
Try to add info from the authorities to field that has subfield with Select2 (subfield with authorised values on Koha 16.11+)

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
7 years agoBug 15503 (QA Followup)
Koha instance kohadev-koha [Tue, 14 Feb 2017 14:52:10 +0000 (14:52 +0000)]
Bug 15503 (QA Followup)

Fix tabs
Dereference hash for each

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 15503 - Populate the order prices
Kyle M Hall [Tue, 24 Jan 2017 16:15:35 +0000 (08:15 -0800)]
Bug 15503 - Populate the order prices

Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 15503 [QA Followup] - Use Koha::AuthorisedValues and fetch notforloan values.
Matthias Meusburger [Mon, 12 Dec 2016 16:11:08 +0000 (16:11 +0000)]
Bug 15503 [QA Followup] - Use Koha::AuthorisedValues and fetch notforloan values.

Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 15503 [QA Followup] - Set itype and ccode properly
Kyle M Hall [Thu, 3 Nov 2016 10:44:56 +0000 (10:44 +0000)]
Bug 15503 [QA Followup] - Set itype and ccode properly

Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 15503 - DBRev 16.12.00.008
Kyle M Hall [Tue, 14 Feb 2017 15:01:24 +0000 (15:01 +0000)]
Bug 15503 - DBRev 16.12.00.008

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 15503 [QA Followup] - Display "uneven number of fields" error only in relevant...
Matthias Meusburger [Wed, 19 Oct 2016 14:36:13 +0000 (16:36 +0200)]
Bug 15503 [QA Followup] - Display "uneven number of fields" error only in relevant biblios

Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 15503 [Followup] - Add replacementprice and itemcallnumber
Matthias Meusburger [Thu, 20 Oct 2016 09:47:27 +0000 (11:47 +0200)]
Bug 15503 [Followup] - Add replacementprice and itemcallnumber

Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 15503 [QA Followup] - Remove the use of GetBranchesLoop
Kyle M Hall [Fri, 16 Sep 2016 13:05:41 +0000 (13:05 +0000)]
Bug 15503 [QA Followup] - Remove the use of GetBranchesLoop

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 15503 - Fix adding multiple items in multiple biblios.
Matthias Meusburger [Wed, 31 Aug 2016 09:13:33 +0000 (11:13 +0200)]
Bug 15503 - Fix adding multiple items in multiple biblios.

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
7 years agoBug 15503: Grab Item Information from Order Files
Matthias Meusburger [Tue, 28 Jun 2016 13:06:46 +0000 (15:06 +0200)]
Bug 15503: Grab Item Information from Order Files

The goal of this development is to automatically generate items in Koha with
populated information based on a 9XX field and subfield, with the new syspref
MarcItemFieldsToOrder.

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
7 years agoBug 18095: Batch item modification: Better message if no item is modified
Marc Véron [Fri, 10 Feb 2017 15:07:13 +0000 (16:07 +0100)]
Bug 18095: Batch item modification: Better message if no item is modified

If no item is modified, the result page of Batch item modification says:
"item(s) modified (with fields modified)."
The message should be: "No items modified"

To reproduce:
- Go to Tools -> Batch item modification
- Put a barcode in and click Continue
- Do not make any changes and/or deselect all item(s)
- Click "Save"
=> Result message reads: "item(s) modified (with fields modified)."

To test:
- Apply patch
- Repeat steps above
- Verify that message makes sense.

NOTE: Also tested positive case with actual field change.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17935: Follow up for C4::Plugin...
Mark Tompsett [Fri, 20 Jan 2017 17:34:56 +0000 (17:34 +0000)]
Bug 17935: Follow up for C4::Plugin...

TEST PLAN
---------
-- apply first patch
git grep "C4::Plugin"
-- still two references
perldoc Koha::Plugins::Base
perldoc Koha::Plugins::Handler

-- apply this patch
git grep "C4::Plugin"
-- no references
perldoc Koha::Plugins::Base
perldoc Koha::Plugins::Handler
-- should look fixed

 Please enter the commit message for your changes. Lines starting

Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17935: Adjust some POD lines, fix a few typos
Marcel de Rooy [Wed, 18 Jan 2017 15:56:16 +0000 (16:56 +0100)]
Bug 17935: Adjust some POD lines, fix a few typos

This patch does the following:

[1] Move some POD lines from Cache to Caches.
[2] Correct C4::Plugins to Koha::Plugins in POD line of Koha::Plugins
[3] POD Koha/AuthorisedValue.pm: lib_opac moved to opac_description
[4] The POD in Koha/Patron.pm uses head2 and head3 inconsistently.
    Ran s/^=head2/=head3/ on those lines (7 substitutions on 7 lines)
[5] Correct a copied POD line from reports/issues_stats.pl in
    reports/reserve_stats.pl.
[6] Correct a test description in t/db_dependent/Koha/Authorities.t.
    You should never delete the library :)
[7] Correct typo shouild in a comment of rebuild_zebra.pl

Test plan:
[1] Read the patch. Does it make sense?
[2] Run perldoc Koha/Cache.pm and Koha/Caches.pm
[3] Run t/db_dependent/Koha/Authorities.t

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 15584 - Staff client list errors are incorrectly styled
Chloe [Thu, 21 Jan 2016 03:20:58 +0000 (03:20 +0000)]
Bug 15584 - Staff client list errors are incorrectly styled

To Test-
1. In the Staff Client, go to Lists
   (/cgi-bin/koha/virtualshelves/shelves.pl) and create a new list with
   the same name as an existing one. --note that it has some red in it
   like an error
2. apply patch
3. In the Staff Client, go to Lists
   (/cgi-bin/koha/virtualshelves/shelves.pl) and create a new list with
   the same name as an existing one. --note that now it should be just
   yellow with black writing as an alert

Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18047 - JavaScript error on item search form unless LOC defined
Nick Clemens [Fri, 3 Feb 2017 11:38:53 +0000 (11:38 +0000)]
Bug 18047 - JavaScript error on item search form unless LOC defined

If LOC is not present, the item search form will raise a JS error:
SyntaxError: expected expression, got '}'

This patch fixes it by handling this specific case.

Note that the "Status" column is still displayed.

Test plan:
Remove your LOC authorised values
Go on the item search form
=> You will not get the JS error and the "Shelving location" bloc is no longer
displayed. There is no need to display it if empty.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 8306: Patrons statistics, fix for patron activity choice
Adrien Saurat [Thu, 13 Dec 2012 09:13:19 +0000 (10:13 +0100)]
Bug 8306: Patrons statistics, fix for patron activity choice

The "inactive" for "patron activity" choice is now effective.

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17982: Fix the use of uniq in sub themelanguage
Marcel de Rooy [Tue, 24 Jan 2017 15:39:28 +0000 (16:39 +0100)]
Bug 17982: Fix the use of uniq in sub themelanguage

Doing uniq( \@themes ) is useless. It will just return to you the only
reference you gave it.
List::MoreUtils::uniq requires a list instead of an arrayref.
So it is a trivial fix that makes sub themelanguage return one theme instead
of three themes like [ 'prog', 'prog',  'prog' ].
Note that Template->new inserts one or two include paths to TT for each of
these three identical themes.

Test plan:
[1] Run t/db_dependent/Templates.t (should no longer fail)
[2] Run t/db_dependent/Auth.t (triggering themelanguage)
[3] Open a page on OPAC or intranet. (Did you restart Plack?)

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
EDIT (Marcel): Amended test plan for additional unit test.

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17982: Expose wrong use of uniq
Marcel de Rooy [Thu, 2 Feb 2017 07:40:58 +0000 (08:40 +0100)]
Bug 17982: Expose wrong use of uniq

This test should fail without the patch fixing the uniq calls.

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18089: Remove warnings from tests using DBIx::Class fixtures
Jonathan Druart [Thu, 9 Feb 2017 12:13:50 +0000 (13:13 +0100)]
Bug 18089: Remove warnings from tests using DBIx::Class fixtures

Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18089 - All XSLT testing singleBranchMode = 0 fails to show even if install has...
Kyle M Hall [Thu, 9 Feb 2017 11:48:40 +0000 (11:48 +0000)]
Bug 18089 - All XSLT testing singleBranchMode = 0 fails to show even if install has only 1 branch

Due to the way it has been implemented, singleBranchMode is set to an
empty string rather than 0 if there is only one branch. This causes any
block that tests for singleBranchMOde to be 0 to never appear.

Test Plan:
1) Apply this patch set
2) prove t/XSLT.t

Signed-off-by: Jenny Schmidt <jschmidt@switchinc.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18089 - Unit test
Kyle M Hall [Thu, 9 Feb 2017 11:48:08 +0000 (11:48 +0000)]
Bug 18089 - Unit test

Signed-off-by: Jenny Schmidt <jschmidt@switchinc.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17838 Availability limit broken until an item has been checked out.
Zoe Schoeler [Wed, 18 Jan 2017 00:55:43 +0000 (00:55 +0000)]
Bug 17838 Availability limit broken until an item has been checked out.

TEST PLAN

1. Make sure you have no items checked out.
2. Run sudo koha-rebuild-zebra -f -v kohadev.
3. Go to search the catalog and search.
4. Check items availability and then click on limit to currently
available items.
5. This should return no results.
6. Apply patch and reload.
7. Results should show.

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Attribute 14: " Specifies whether un-indexed fields should be ignored. A
zero value (default) throws a diagnostic when an un-indexed field is
specified. A non-zero value makes it return 0 hits."
From http://www.indexdata.com/zebra/doc/querymodel-zebra.html

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18014: QA follow-up: Use ok() instead of is() for '>' comparison
Julian Maurice [Fri, 3 Feb 2017 12:31:56 +0000 (13:31 +0100)]
Bug 18014: QA follow-up: Use ok() instead of is() for '>' comparison

Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18014: AddAuthority should respect AUTO_INCREMENT
Marcel de Rooy [Mon, 30 Jan 2017 14:19:35 +0000 (15:19 +0100)]
Bug 18014: AddAuthority should respect AUTO_INCREMENT

Instead of using the MAX(authid)+1 logic, AddAuthority should just save
the record and get the new id. The authid column is an autoincrement.

This eliminates problems where a newly assigned authid also refers to a
previously deleted record. (And it will not cause problems when refining
the dontmerge functionality on report 9988.)

Note: ModAuthority also calls AddAuthority to update an existing record; in
that case we should not create a new record even if the record should not
be found any more (which should be exceptional).

This patch also simplifies handling of 001 in the authority record: in all
cases this field is updated now; no need to check its contents.

Test plan:
[1] Run t/db_dependent/AuthoritiesMarc.t
[2] Add a new authority record via the interface

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18014: Add test to AuthoritiesMarc.t to expose problem in AddAuthority
Marcel de Rooy [Tue, 31 Jan 2017 08:11:05 +0000 (09:11 +0100)]
Bug 18014: Add test to AuthoritiesMarc.t to expose problem in AddAuthority

Since AddAuthority uses max(id)+1 logic to produce the next authid,
authority id's will be reused when you delete the last record. This may
be a source of problems and will be addressed on the next patch.

This patch add a test to expose the problem.

Test plan:
[1] Run t/db_dependent/AuthoritiesMarc.t

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18014: General update of AuthoritiesMarc.t
Marcel de Rooy [Tue, 31 Jan 2017 07:59:45 +0000 (08:59 +0100)]
Bug 18014: General update of AuthoritiesMarc.t

Modern::Perl, Koha::Database, etc.

Test plan:
Run t/db_dependent/AuthoritiesMarc.t

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 4126 - Exit bulkmarcimport if -a and -b given
Magnus Enger [Thu, 10 Nov 2016 14:32:44 +0000 (14:32 +0000)]
Bug 4126 - Exit bulkmarcimport if -a and -b given

Currently it is possible to spceify both --biblios and --authorities
as command line switches to bulkmarcimport.pl. This does not make sense
so we should exit early and explain that these switches are mutually
exclusive.

To test:
- Run one of these and check that there is no complaint about missing
  options:
  perl misc/migration_tools/bulkmarcimport.pl -a -b
  sudo koha-shell -c "perl misc/migration_tools/bulkmarcimport.pl -a -b"
  kohadev
- Observe that this displays the perldoc, but does not complain about
  mutually exclusive switches.
- Apply the patch
- Rerun the command(s) from earlier.
- Verify that the script is now halted and a small explanation given.

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18009 - IssueSlip.t test fails if launched between 00:00 and 00:59
Mason James [Sat, 28 Jan 2017 11:47:20 +0000 (00:47 +1300)]
Bug 18009 - IssueSlip.t test fails if launched between 00:00 and 00:59

to test patch...

1/ set date between 00:00 and 00:59
$ sudo date -s 'Sun Jan 29 00:41:55 NZDT 2017'

2/ run prove, see fail
$ prove -v t/db_dependent/Members/IssueSlip.t
...
t/db_dependent/Members/IssueSlip.t (Wstat: 65280 Tests: 1 Failed: 0)
Result: FAIL

3/ apply patch

4/ run prove, see pass
$ prove -v t/db_dependent/Members/IssueSlip.t
...
All tests successful.
Result: PASS

NOTE: for code obscurity you could have also done a modulus 24. ;)

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17788: (MARC21) Add $9 fields to Koha-Auth-Number:w index
Tomas Cohen Arazi [Sat, 17 Dec 2016 12:25:54 +0000 (09:25 -0300)]
Bug 17788: (MARC21) Add $9 fields to Koha-Auth-Number:w index

Looking at the default framework's fields that are linked to authority
records, there's a divergence with the Zebra index definitions.

This yields to authority usage count be incorrect for users searching
for authority records.

MariaDB [koha_kohadev]> SELECT tagfield,tagsubfield,authtypecode FROM
marc_subfield_structure WHERE authtypecode IS NOT NULL AND
authtypecode<>'' AND frameworkcode='' GROUP BY
tagfield,tagsubfield,authtypecode ;
+----------+-------------+--------------+
| tagfield | tagsubfield | authtypecode |
+----------+-------------+--------------+
| 100      | a           | PERSO_NAME   |
| 110      | a           | CORPO_NAME   |
| 111      | a           | MEETI_NAME   |
| 130      | a           | UNIF_TITLE   |
| 440      | a           | UNIF_TITLE   |
| 600      | a           | PERSO_NAME   |
| 610      | a           | CORPO_NAME   |
| 611      | a           | MEETI_NAME   |
| 630      | a           | UNIF_TITLE   |
| 648      | a           | CHRON_TERM   |
| 650      | a           | TOPIC_TERM   |
| 651      | a           | GEOGR_NAME   |
| 654      | a           | TOPIC_TERM   |
| 655      | a           | GENRE/FORM   |
| 656      | a           | TOPIC_TERM   |
| 657      | a           | TOPIC_TERM   |
| 658      | a           | TOPIC_TERM   |
| 662      | a           | GEOGR_NAME   |
| 690      | a           | TOPIC_TERM   |
| 691      | a           | GEOGR_NAME   |
| 696      | a           | PERSO_NAME   |
| 697      | a           | CORPO_NAME   |
| 698      | a           | MEETI_NAME   |
| 699      | a           | UNIF_TITLE   |
| 700      | a           | PERSO_NAME   |
| 710      | a           | CORPO_NAME   |
| 711      | a           | MEETI_NAME   |
| 730      | a           | UNIF_TITLE   |
| 796      | a           | PERSO_NAME   |
| 797      | a           | CORPO_NAME   |
| 798      | a           | MEETI_NAME   |
| 799      | a           | UNIF_TITLE   |
| 800      | a           | PERSO_NAME   |
| 810      | a           | CORPO_NAME   |
| 811      | a           | MEETI_NAME   |
| 830      | a           | UNIF_TITLE   |
| 896      | a           | PERSO_NAME   |
| 897      | a           | CORPO_NAME   |
| 898      | a           | MEETI_NAME   |
| 899      | a           | UNIF_TITLE   |
+----------+-------------+--------------+

This patch adds the missing ones to the authority number index as it is
done for the rest of the fields.

To test:
- Verify that
etc/zebradb/marc_defs/marc21/biblios/biblio-koha-indexdefs.xml
contains intries pointing the $9 subfield of all the fields in the
'tagfield' column above, to the Koha-Auth-Number:w index.
- Sign off :-D

Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17512: Improve handling dates in C4::Items
Marcel de Rooy [Thu, 27 Oct 2016 13:07:29 +0000 (15:07 +0200)]
Bug 17512: Improve handling dates in C4::Items

This is a follow-up on the internal server error on 0000-00-00 in the items
column onloan. This patch deals with preventing to have such dates at all
in the date fields of items.

It is accomplished by:
[1] Adding a (private) subroutine _mod_item_dates. It takes an item hash
    and replaces date values if needed.
[2] AddItem and ModItem call _koha_new_item resp. koha_modify_item. In these
    routines a call to the new _mod_item_dates is inserted.
[3] Although the routine is actually private, I have added some unit tests
    to Items.t.

Test plan:
[1] Add a new item. Fill a correct date in dateaccessioned and an invalid
    date in Price effective from (=replacementpricedate).
[2] Verify that dateaccessioned is saved correctly and replacementpricedate
    is still null (does not contain 0000-00-00).
[3] Edit the item again. Fill some text in dateaccessioned and put a correct
    date in replacementpricedate. Verify the results.
[4] Run t/db_dependent/Items.t

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17988: Add a comment to explain the line
Jonathan Druart [Thu, 2 Feb 2017 09:28:21 +0000 (10:28 +0100)]
Bug 17988: Add a comment to explain the line

Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17988 - Select2 prevents correct tag expand/minimize functionality
Oleg Vasylenko [Wed, 25 Jan 2017 10:01:05 +0000 (12:01 +0200)]
Bug 17988 - Select2 prevents correct tag expand/minimize functionality

Overview:
Select2 (Bug 13501) introduced divs and inputs that broke some assumptions about the expected HTML structure.
Because of that, expanding fields to show all hidden subfields does not work properly.

Steps to Reproduce:
1. Open some book in the editor or create new (cataloguing/addbiblio.pl)
2. Try to minimize or expand fields, that have among subfields the following:
— Thesaurus driven subfield â†’ subfield with Select2
— Hidden subfield.

Actual Results:
 — some fields become hidden, some not, and vice versa
 — in the console, you'll see Â«Uncaught TypeError: Cannot read property 'match' of null»

Expected Results:
 — all subfields should minimize/maximize completely

Additional Information:
This happens because Select2 adds some divs, that do not have ID property.
The following patch adds check for the needed attribute existance.

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17134: Replace item types codes with category in facets (opac)
Emma [Wed, 18 Jan 2017 21:37:23 +0000 (21:37 +0000)]
Bug 17134: Replace item types codes with category in facets (opac)

To test:
-Search in OPAC for two or more items
-Note that item types display category codes rather than names
-Make change to file and test in OPAC

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 16984: Do not clone the item block for standing orders
Jonathan Druart [Tue, 22 Nov 2016 09:35:07 +0000 (09:35 +0000)]
Bug 16984: Do not clone the item block for standing orders

If AcqCreateItem is set to ordering and the basket is marked as
"standing orders", when ordering a JS error is raised:
additem.js:176 Uncaught TypeError: window[events[i]] is not a function

The item block should not be displayed in that case.

Test plan:
- Set AcqCreateItem to "ordering"
- Create a basket and tick the "Standing orders" checkbox
- Add an order to this basket
=> Without this patch you get the JS error
=> With this patch applied you will not get it

Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17940: (follow-up 14695) Fix - Mark holds as waiting when transfer is done
Jonathan Druart [Wed, 8 Feb 2017 16:49:41 +0000 (17:49 +0100)]
Bug 17940: (follow-up 14695) Fix - Mark holds as waiting when transfer is done

When an item from Library A is reserved and set to be picked up at
Library B, the hold buttons fail to confirm or cancel during check in at
Library B when the item is transferred from Library A.

Test plan:
* Create a hold for item at Library A to be picked up at Library B.
* Check in item at Library A to trigger the transfer.
=> item shows in transit
* Switch to Library B and check in item.
* Confirm the hold.
=> item shows waiting

Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18076: Replace holds_to_place_count with an input type=text
Jonathan Druart [Wed, 8 Feb 2017 11:41:37 +0000 (12:41 +0100)]
Bug 18076: Replace holds_to_place_count with an input type=text

From http://www.template-toolkit.org/docs/manual/Directives.html#section_WHILE

"""
The Template Toolkit uses a failsafe counter to prevent runaway WHILE loops which
 would otherwise never terminate. If the loop exceeds 1000 iterations then an undef
exception will be thrown, reporting the error:

WHILE loop terminated (> 1000 iterations)

The $Template::Directive::WHILE_MAX variable controls this behaviour and can be set
to a higher value if necessary.
"""

I do not think we want to increase this value, and I do not think we want to display a
dropdown list with 1000 entries.

This patch replaces the dropdown list with an input text.

Test plan:
- Set circulation conditions - holds per record = 999
- Search for record with items
- Go to the holds tab
- Search for a patron
- Verify that when you send your search, the 'internal server error' is not shown
and you see the input text.
You should be able to enter a value > than 999 and < 1

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18079: Holds to pull cleanup
Josef Moravec [Wed, 8 Feb 2017 08:49:46 +0000 (08:49 +0000)]
Bug 18079: Holds to pull cleanup

Changes made:

  - remove obsolete comment in pendingreserves.pl
  - use Modern::Perl in circ/pendingreserves.pl
  - get rid of unusable param run_report - followup for bug 8454
  - get rid of references to hold status - followup for bug 9320
  - remove unused data from SQL and reservedata structure

Test plan:
1) Apply patch from bug 18073
2) Apply patch on this bug
3) Enable on shelf hold in administration -> circulation and fines rules
4) Create some holds on avalaible items
5) Confirm that circulation -> holds to pull page works as expected
6) Try to find any regression

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18073: Followup - don't use CONCAT_WS
Josef Moravec [Thu, 9 Feb 2017 13:09:56 +0000 (13:09 +0000)]
Bug 18073: Followup - don't use CONCAT_WS

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18073: Holds to pull table enhancement
Josef Moravec [Tue, 7 Feb 2017 16:44:12 +0000 (17:44 +0100)]
Bug 18073: Holds to pull table enhancement

Test plan:
0) apply the patch
1) enable on shelf hold in administration -> circulation and fines rules
2) create some holds on avalaible items
3) go to administration -> columns settings and confirm there is new holds-to-pull table in circulation section
4) go to circulation -> holds to pull page and confirm that
    4a) that the page does work as before
    4b) there is ne "Column visibility" button in datatable toolbar
    4c) the column configuration does work as expected
    4d) there is new column "First patron" with link to patron which is
        first in holds queue for given record
    4e) sorting works ax expected
    4f) filters (in teh bottom of table) work as expected

Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works nicely!

https://bugs.koha-community.org/show_bug.cgi?id=18079

Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
7 years agoBug 16115: Remove JS error on item search if NOT_LOAN values do not exist
Jonathan Druart [Sat, 21 Jan 2017 07:48:20 +0000 (08:48 +0100)]
Bug 16115: Remove JS error on item search if NOT_LOAN values do not exist

If NOT_LOAN is not present, the item search form will raise a JS error:
SyntaxError: expected expression, got '}'

This patch fixes it by handling this specific case.

Note that the "Status" column is still displayed.

Test plan:
Remove your NOT_LOAN authorised values
Go on the item search form
=> You will not get the JS error and the "Status" bloc is no longer
displayed. There is no need to display it if empty.

Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 11450: Hold Request Confirm Deletion
Luke Honiss [Thu, 19 Jan 2017 02:55:31 +0000 (02:55 +0000)]
Bug 11450: Hold Request Confirm Deletion

==TEST PLAN==
1) Go to an item with a hold and click on the holds tab on the
left
2) Click the red 'X'
3) The hold will be deleted immediately
4) Apply patch
5) Return to an item with a hold and click the 'X'
6) There will now be a confirmation dialog
7) Click cancel and the dialog will disappear and the hold will not be
deleted
8) Click OK and the hold will be deleted

Restored indentations - Mark Tompsett

Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17927: (QA followup) Fix timestamp nullable in hold.json
Tomas Cohen Arazi [Fri, 3 Feb 2017 18:57:42 +0000 (15:57 -0300)]
Bug 17927: (QA followup) Fix timestamp nullable in hold.json

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17927: (QA followup) Fix boolean types
Tomas Cohen Arazi [Tue, 17 Jan 2017 18:19:06 +0000 (15:19 -0300)]
Bug 17927: (QA followup) Fix boolean types

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17927: (followup) Fix /cities cityid type
Josef Moravec [Fri, 4 Nov 2016 00:34:38 +0000 (00:34 +0000)]
Bug 17927: (followup) Fix /cities cityid type

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17927: Fix /holds and /patrons data types
Lari Taskula [Tue, 16 Aug 2016 10:37:29 +0000 (13:37 +0300)]
Bug 17927: Fix /holds and /patrons data types

This patch changes current Swagger definitions for patrons and holds to have
data types corresponding to column data types in their database tables.

To test:
1. GET http://yourlibrary/api/v1/patrons/YYY where YYY is existing borrowernumber
2. Observe that numbers / integers are in string data type.
3. Apply this patch
4. Repeat step 1.
5. Observe that numbers / integers are now actually numbers / integers.

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17782: Fix tests
Jonathan Druart [Fri, 27 Jan 2017 09:14:46 +0000 (10:14 +0100)]
Bug 17782: Fix tests

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17782 - (QA Followup)
Nick Clemens [Wed, 25 Jan 2017 15:59:42 +0000 (15:59 +0000)]
Bug 17782 - (QA Followup)

Fix tests

prove t/db_dependent/Koha/Patrons.t

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17782 - Patron updated_on field should be set to current timestamp when borrower...
Nick Clemens [Thu, 15 Dec 2016 14:17:55 +0000 (14:17 +0000)]
Bug 17782 - Patron updated_on field should be set to current timestamp when borrower is deleted

To test:
01 Find a patron
02 Get the updated_on value from the db in borrowers table
03 Delete the patron
04 Get the update_on value from the db on deletedborrowers table
05 Values from 02 and 04 are the same
06 Apply patch
07 Repeat 01-04
08 Values should now be different

Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 16387: Fix default shortened loan period time
Lari Taskula [Mon, 12 Dec 2016 14:49:44 +0000 (16:49 +0200)]
Bug 16387: Fix default shortened loan period time

When a loan period is shortened due to using decreaseLoanHighHolds* the time is
always set to the current time in X days, even if the original loan period is
given in days and not in hours.

It should default to 23:59 as is normal for loan periods given in days.

As original due date time defaults to 23:59 when given in days, this patch
modifies the hours and minutes of shortened due date to be equal to original due
date.

To test:
1. prove t/db_dependent/DecreaseLoanHighHolds.t

Signed-off-by: Grace McKenzie <grace.mcky@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17929 - You can't edit indicators in the cataloging screen
Josef Moravec [Tue, 24 Jan 2017 07:16:37 +0000 (07:16 +0000)]
Bug 17929 - You can't edit indicators in the cataloging screen

Test plan:
0. Do not apply the patch
1. Edit a biblio record, note you can't edit an indicator (in fact you edit it, but can't see the value)
2. Edit an authority record, note you can't edit an indicator (in fact you edit it, but can't see the value)
3. Apply the patch, you may need clear the browser cache (in Firefox Ctrl+F5 is often enough)
4. Repeat steps 1 and 2 - but now you will be able to edit the indicator

Signed-off-by: J Schmidt <jschmidt@switchinc.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17922: Use correct number of digits when replacing date placeholders
Julian Maurice [Wed, 18 Jan 2017 10:29:57 +0000 (11:29 +0100)]
Bug 17922: Use correct number of digits when replacing date placeholders

This patch also fixes a typo ("<<MM><" should be "<<MM>>")

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18015 - On shelf holds allowed > "If all unavailable" ignores notforloan
Mirko Tietgen [Mon, 30 Jan 2017 14:59:59 +0000 (15:59 +0100)]
Bug 18015 - On shelf holds allowed > "If all unavailable" ignores notforloan

If in the circ rules matrix you set "On shelf holds allowed" to "If all unavailable",
items with status "Not for loan" are considered available and break the functionality.

Test plan:

- Set "On shelf holds allowed" to "If all unavailable" for your patron and item
  category (or everyone and everything)
- Have two items for a record. Check out one
- Set 7 - Not for loan: "Not For Loan" for the second item
- Try to place a hold. Does not work.

- Apply the patch
- Try to place a hold. Should work now.

Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17871: (followup) Remove zebra::* from the packages templates
Tomas Cohen Arazi [Tue, 24 Jan 2017 11:34:44 +0000 (08:34 -0300)]
Bug 17871: (followup) Remove zebra::* from the packages templates

Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17871: Remove zebra::snippet to allow access to facets in YAZ 5.8.1+
David Cook [Tue, 10 Jan 2017 01:36:25 +0000 (12:36 +1100)]
Bug 17871: Remove zebra::snippet to allow access to facets in YAZ 5.8.1+

This patch restores access to zebra facets (or zebra::snippet) with YAZ 5.8.1 or higher.

It was failing due to The <retrieval syntax="xml" name="zebra::*" /> entry in
retrieval-info-bib-dom.xml which IndexData said it wasn't even needed to
get that access.

Edit: I amended the commit message (tcohen)

Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I tested on kohadevbox and found no regression or behaviour change. I
will provide a followup for the packages.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18005: Re-styled pagination on search results with Bootstrap
Josef Moravec [Wed, 18 Jan 2017 12:36:37 +0000 (12:36 +0000)]
Bug 18005: Re-styled pagination on search results with Bootstrap

Test plan:
0. Don't apply path
1. Make catalogue search in staff client with more then 20 results,
    scroll down to see that pagination is broken
2. Apply the patch
3. Make similar search and confirm, the pagination looks OK with new
style

Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18013 - acqui/transferorder.pl typo in find method
Dobrica Pavlinusic [Mon, 30 Jan 2017 12:02:36 +0000 (13:02 +0100)]
Bug 18013 - acqui/transferorder.pl typo in find method

This typo was introduced in Bug 13726 and has obvious fix

Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18044: Add a test
Jonathan Druart [Mon, 6 Feb 2017 08:18:29 +0000 (09:18 +0100)]
Bug 18044: Add a test

Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 18044: Label Batches not displaying
Chris Nighswonger [Sun, 5 Feb 2017 21:11:30 +0000 (16:11 -0500)]
Bug 18044: Label Batches not displaying

SQL expects lists to be comma separated. A trailing comma must also
be avoided.

Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17775 - Add new user with LDAP not works under Plack
Dobrica Pavlinusic [Mon, 30 Jan 2017 11:42:09 +0000 (12:42 +0100)]
Bug 17775 - Add new user with LDAP not works under Plack

This patch fixes internal server error:

Undefined subroutine &C4::Auth_with_ldap::AddMember called at /srv/koha_ffzg/C4/Auth_with_ldap.pm line 213.

It occurs only under plack, and it's strange since C4::Members
does EXPORT AddMember and we are importing it into Auth_with_ldap.pm
(and it does work under CGI).

Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I did not test but trust author and signoffer. The change cannot hurt.

Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 15030: Add tests
Jonathan Druart [Thu, 12 Nov 2015 12:28:38 +0000 (12:28 +0000)]
Bug 15030: Add tests

This test will prevent regression on the lost of data when
items.itemcallnumber is linked with a plugin.

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 15030 - continue. The enumchron value was overwritten by 'header' even when value...
Blou [Thu, 22 Oct 2015 20:49:10 +0000 (16:49 -0400)]
Bug 15030 - continue. The enumchron value was overwritten by 'header' even when value supplied

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 15030 - Fixes the serials fields associated with a plugin, to not overwrite the...
Blou [Wed, 21 Oct 2015 18:35:18 +0000 (14:35 -0400)]
Bug 15030 - Fixes the serials fields associated with a plugin, to not overwrite the previously saved value

This fixes the remaining fields from serials-edit.pl that were seeing their previously entered values
be oblitarated with each new edit.  The fields associated to a plugin (dateaccessioned and barcode) were
always displaying <empty> with each new edit, losing the previous effort.

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 15030 - Certain values in serials' items are lost on next edit
Blou [Mon, 19 Oct 2015 16:16:05 +0000 (12:16 -0400)]
Bug 15030 - Certain values in serials' items are lost on next edit

When editing serials subscription, we can edit them but some values are not pulled from the DB correctly to be put in the edit box.  If not noticed, the value will be overwritten on the next save.

Test:
- Create a subscription
- Edit itemcallnumber (952o?) and make sure to have a different value than the default one.
- Save.
- Edit it again
- The saved value is not there.

This is true for itemcallnumber and a few other fields.

This was caused by calls to ->field($subfield).  This would always fail, of course.

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17255 - Upgrade Elastic Search code to work with version 5.1
Olli-Antti Kivilahti [Tue, 10 Jan 2017 14:28:35 +0000 (16:28 +0200)]
Bug 17255 - Upgrade Elastic Search code to work with version 5.1

Builds on top of commit:
    Bug 17255 - Upgrade Elastic Search code to work with version 2.4+ - rebased wip

-Fix data type 'string' to 'keyword' and 'text'
-index: not_analyzed deprecated, replaced with type: keyword which is equivalent
-store: yes was deprecated, use store: true

TODO: Installer bindings to both the debian package install and the raw developer install.
A taster in Buug 17851

ZE TEST PLAN

0. Remove existing ES and reinstall ES 5.1
   apt-get purge elasticsearch
   Follow instruction here:
   https://www.elastic.co/guide/en/elasticsearch/reference/current/deb.html

1. Reset Elasticsearch index since facets are hard coded to dynamic search_marc_mappings.
1a. perl -e 'use Koha::SearchEngine::Elasticsearch; Koha::SearchEngine::Elasticsearch->reset_elasticsearch_mappings();'
1b. If you get trouble, simply DELETE FROM [search_fields|search_marc_to_fields|search_marc_mapping];
    and retry 1a.
1c. Destroy elasticsearch index
    curl -XDELETE localhost:9200/koha_biblios
    so it can be recreated

2. Recreate the index:
   perl misc/search_tools/rebuild_elastic_search.pl
2a. Add something to index if your koha.biblio-table is empty

3. Fetch all indexed records and the facet for subject__facet

curl -XGET localhost:9200/koha_biblios/data/_search?pretty -d '{
  "aggregations": {
    "my_agg": {
      "terms": {
        "field": "subject__facet"
      }
    }
  }
}'

4. Run the included tests:
   perl t/db_dependent/Koha_Elasticsearch_Indexer.t
   perl t/db_dependent/Koha_Elasticsearch.t
   perl t/db_dependent/Koha_SearchEngine_Elasticsearch_Search.t

Have fun with your new ES 5.1 cluster!

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
7 years agoBug 17255 - Upgrade Elastic Search code to work with version 2.4+ - rebased wip
Olli-Antti Kivilahti [Mon, 9 Jan 2017 16:17:48 +0000 (18:17 +0200)]
Bug 17255 - Upgrade Elastic Search code to work with version 2.4+ - rebased wip

-Changed deprecated facets to aggregations
-Fixed boolean datatypes not allowing analyzers to be specified
-Fixed deprecated '_id' to 'es_id'. Now the ES-index has the correct id==biblionumber

ZE TEST PLAN

1. Reset Zebra index since facets are hard coded to dynamic search_marc_mappings.
2. perl misc/search_tools/rebuild_elastic_search.pl
3. Fetch all indexed records and the facet for subject__facet

curl -XGET localhost:9200/koha_biblios/data/_search?pretty -d '{
  "aggregations": {
    "my_agg": {
      "terms": {
        "field": "subject__facet"
      }
    }
  }
}'

Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>